ext4_fill_super() is no longer called by read_super(), and it is no
longer called with the superblock locked. The
unlock_super()/lock_super() is no longer present, so this comment is
entirely superfluous.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ext4's on-line resizing adds a new block group and then, only at the
last step adjusts s_groups_count. However, it's possible on SMP
systems that another CPU could see the updated the s_group_count and
not see the newly initialized data structures for the just-added block
group. For this reason, it's important to insert a SMP read barrier
after reading s_groups_count and before reading any (for example) the
new block group descriptors allowed by the increased value of
s_groups_count.
Unfortunately, we rather blatently violate this locking protocol
documented in fs/ext4/resize.c. Fortunately, (1) on-line resizes
happen relatively rarely, and (2) it seems rare that the filesystem
code will immediately try to use just-added block group before any
memory ordering issues resolve themselves. So apparently problems
here are relatively hard to hit, since ext3 has been vulnerable to the
same issue for years with no one apparently complaining.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
By using a separate super_operations structure for filesystems that
have and don't have journals, we can simply ext4_write_super() ---
which is only needed when no journal is present --- and ext4_freeze(),
ext4_unfreeze(), and ext4_sync_fs(), which are only needed when the
journal is present.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The s_dirt flag wasn't completely handled correctly, but it didn't
really matter when journalling was enabled. It turns out that when
ext4 runs without a journal, we don't clear s_dirt in places where we
should have, with the result that the high-level write_super()
function was writing the superblock when it wasn't necessary.
So we fix this by making ext4_commit_super() clear the s_dirt flag,
and removing many of the other places where s_dirt is manipulated.
When journalling is enabled, the s_dirt flag might be left set more
often, but s_dirt really doesn't matter when journalling is enabled.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext4_commit_super() function took both a struct super_block * and
a struct ext4_super_block *, but the struct ext4_super_block can be
derived from the struct super_block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For very large filesystems, the s_flex_groups array can get quite big.
For example, a filesystem that can be resized up to 16TB will have
8192 flex groups (assuming the default flex_bg size of 16), so the
array is 96k, which is *very* marginal for kmalloc(). On the other
hand, a 160GB filesystem without the resize_inode feature will only
require 960 bytes. So we try to allocate the array first using
kmalloc(), and if that fails, we'll try to use vmalloc() instead.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Setting BH_Unwritten buffer_heads as BH_Mapped avoids multiple
(unnecessary) calls to get_block() during the call to the write(2)
system call. Setting BH_Unwritten buffer heads as BH_Mapped requires
that the writepages() functions can handle BH_Unwritten buffer_heads.
After this commit, things work as follows:
ext4_ext_get_block() returns unmapped, unwritten, buffer head when
called with create = 0 for prealloc space. This makes sure we handle
the read path and non-delayed allocation case correctly. Even though
the buffer head is marked unmapped we have valid b_blocknr and b_bdev
values in the buffer_head.
ext4_da_get_block_prep() called for block resrevation will now return
mapped, unwritten, new buffer_head for prealloc space. This avoids
multiple calls to get_block() for write to same offset. By making such
buffers as BH_New, we also assure that sub-block zeroing of buffered
writes happens correctly.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
These struct buffer_heads are allocated on the stack (and hence are
initialized with stack garbage). They are only used to call a
get_blocks() function, so that's mostly OK, but b_state must be
initialized to be 0 so we don't have any unexpected BH_* flags set by
accident, such as BH_Unwritten or BH_Delay.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If two CPU's simultaneously call ext4_ext_get_blocks() at the same
time, there is nothing protecting the i_cached_extent structure from
being used and updated at the same time. This could potentially cause
the wrong location on disk to be read or written to, including
potentially causing the corruption of the block group descriptors
and/or inode table.
This bug has been in the ext4 code since almost the very beginning of
ext4's development. Fortunately once the data is stored in the page
cache cache, ext4_get_blocks() doesn't need to be called, so trying to
replicate this problem to the point where we could identify its root
cause was *extremely* difficult. Many thanks to Kevin Shanahan for
working over several months to be able to reproduce this easily so we
could finally nail down the cause of the corruption.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
The BH_Unwritten flag indicates that the buffer is allocated on disk
but has not been written; that is, the disk was part of a persistent
preallocation area. That flag should only be set when a get_blocks()
function is looking up a inode's logical to physical block mapping.
When ext4_get_blocks_wrap() is called with create=1, the uninitialized
extent is converted into an initialized one, so the BH_Unwritten flag
is no longer appropriate. Hence, we need to make sure the
BH_Unwritten is not left set, since the combination of BH_Mapped and
BH_Unwritten is not allowed; among other things, it will result ext4's
get_block() to be called over and over again during the write_begin
phase of write(2).
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use a very large unsigned number (~0xffff) as as the fake block number
for the delayed new buffer. The VFS should never try to write out this
number, but if it does, this will make it obvious.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need to mark the buffer_head mapping preallocated space as new
during write_begin. Otherwise we don't zero out the page cache content
properly for a partial write. This will cause file corruption with
preallocation.
Now that we mark the buffer_head new we also need to have a valid
buffer_head blocknr so that unmap_underlying_metadata() unmaps the
correct block.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The EXTENTS_FL flag should never be set on special files, but if it
is, don't bother trying to validate that the extents tree is valid,
since only files, directories, and non-fast symlinks will ever have an
extent data structure. We perhaps should flag the filesystem as being
corrupted if we see a special file (named pipes, device nodes, Unix
domain sockets, etc.) with the EXTENTS_FL flag, but e2fsck doesn't
currently check this case, so we'll just ignore this for now, since
it's harmless.
Without this fix, a special device with the extents flag is flagged as
an error by the kernel, so it is impossible to access or delete the
inode, but e2fsck doesn't see it as a problem, leading to
confused/frustrated users.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't try to look at i_file_acl_high unless the INCOMPAT_64BIT feature
bit is set. The field is normally zero, but older versions of e2fsck
didn't automatically check to make sure of this, so in the spirit of
"be liberal in what you accept", don't look at i_file_acl_high unless
we are using a 64-bit filesystem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the block containing external extended attributes (which is stored
in i_file_acl and i_file_acl_high) is larger than the on-disk
filesystem, the process which tried to access the extended attributes
will endlessly issue kernel printks complaining that
"__find_get_block_slow() failed", locking up that CPU until the system
is forcibly rebooted.
So when we read in the inode, make sure the i_file_acl value is legal,
and if not, flag the filesystem as being corrupted.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Fix potential inode allocation soft lockup in Orlov allocator
ext4: Make the extent validity check more paranoid
jbd: use SWRITE_SYNC_PLUG when writing synchronous revoke records
jbd2: use SWRITE_SYNC_PLUG when writing synchronous revoke records
ext4: really print the find_group_flex fallback warning only once
Instead of just checking that the extent block number is greater or
equal than s_first_data_block, make sure it it is not pointing into
the block group descriptors, since that is clearly wrong. This helps
prevent filesystem from getting very badly corrupted in case an extent
block is corrupted.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Missing braces caused the warning to print more than once.
Signed-Off-By: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit fe2c8191 introduced a regression on big-endian system, because
the checks to make sure block references in non-extent inodes are
valid failed to use le32_to_cpu().
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Thiemo Nagel <thiemo.nagel@ph.tum.de>
Tested-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
trivial: Update my email address
trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
trivial: Fix misspelling of "Celsius".
trivial: remove unused variable 'path' in alloc_file()
trivial: fix a pdlfush -> pdflush typo in comment
trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
trivial: wusb: Storage class should be before const qualifier
trivial: drivers/char/bsr.c: Storage class should be before const qualifier
trivial: h8300: Storage class should be before const qualifier
trivial: fix where cgroup documentation is not correctly referred to
trivial: Give the right path in Documentation example
trivial: MTD: remove EOL from MODULE_DESCRIPTION
trivial: Fix typo in bio_split()'s documentation
trivial: PWM: fix of #endif comment
trivial: fix typos/grammar errors in Kconfig texts
trivial: Fix misspelling of firmware
trivial: cgroups: documentation typo and spelling corrections
trivial: Update contact info for Jochen Hein
trivial: fix typo "resgister" -> "register"
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
Remove two unneeded exports and make two symbols static in fs/mpage.c
Cleanup after commit 585d3bc06f
Trim includes of fdtable.h
Don't crap into descriptor table in binfmt_som
Trim includes in binfmt_elf
Don't mess with descriptor table in load_elf_binary()
Get rid of indirect include of fs_struct.h
New helper - current_umask()
check_unsafe_exec() doesn't care about signal handlers sharing
New locking/refcounting for fs_struct
Take fs_struct handling to new file (fs/fs_struct.c)
Get rid of bumping fs_struct refcount in pivot_root(2)
Kill unsharing fs_struct in __set_personality()
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (33 commits)
ext4: Regularize mount options
ext4: fix locking typo in mballoc which could cause soft lockup hangs
ext4: fix typo which causes a memory leak on error path
jbd2: Update locking coments
ext4: Rename pa_linear to pa_type
ext4: add checks of block references for non-extent inodes
ext4: Check for an valid i_mode when reading the inode from disk
ext4: Use WRITE_SYNC for commits which are caused by fsync()
ext4: Add auto_da_alloc mount option
ext4: Use struct flex_groups to calculate get_orlov_stats()
ext4: Use atomic_t's in struct flex_groups
ext4: remove /proc tuning knobs
ext4: Add sysfs support
ext4: Track lifetime disk writes
ext4: Fix discard of inode prealloc space with delayed allocation.
ext4: Automatically allocate delay allocated blocks on rename
ext4: Automatically allocate delay allocated blocks on close
ext4: add EXT4_IOC_ALLOC_DA_BLKS ioctl
ext4: Simplify delalloc code by removing mpage_da_writepages()
ext4: Save stack space by removing fake buffer heads
...
Change the page_mkwrite prototype to take a struct vm_fault, and return
VM_FAULT_xxx flags. There should be no functional change.
This makes it possible to return much more detailed error information to
the VM (and also can provide more information eg. virtual_address to the
driver, which might be important in some special cases).
This is required for a subsequent fix. And will also make it easier to
merge page_mkwrite() with fault() in future.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for using the mount options "barrier" and "nobarrier", and
"auto_da_alloc" and "noauto_da_alloc", which is more consistent than
"barrier=<0|1>" or "auto_da_alloc=<0|1>". Most other ext3/ext4 mount
options use the foo/nofoo naming convention. We allow the old forms
of these mount options for backwards compatibility.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Impact: code cleanup
This patch rename pa_linear to pa_type and add MB_INODE_PA
and MB_GROUP_PA to indicate inode and group prealloc space.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Check block references in the inode and indorect blocks for non-extent
inodes to make sure they are valid, and flag an error if they are
invalid.
Signed-off-by: Thiemo Nagel <thiemo.nagel@ph.tum.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use lowercase names of quota functions instead of old uppercase ones.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mingming Cao <cmm@us.ibm.com>
CC: linux-ext4@vger.kernel.org
Uses quota reservation/claim/release to handle quota properly for delayed
allocation in the three steps: 1) quotas are reserved when data being copied
to cache when block allocation is defered 2) when new blocks are allocated.
reserved quotas are converted to the real allocated quota, 2) over-booked
quotas for metadata blocks are released back.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
This is for Red Hat bug 490026: EXT4 panic, list corruption in
ext4_mb_new_inode_pa
ext4_lock_group(sb, group) is supposed to protect this list for
each group, and a common code flow to remove an album is like
this:
ext4_get_group_no_and_offset(sb, pa->pa_pstart, &grp, NULL);
ext4_lock_group(sb, grp);
list_del(&pa->pa_group_list);
ext4_unlock_group(sb, grp);
so it's critical that we get the right group number back for
this prealloc context, to lock the right group (the one
associated with this pa) and prevent concurrent list manipulation.
however, ext4_mb_put_pa() passes in (pa->pa_pstart - 1) with a
comment, "-1 is to protect from crossing allocation group".
This makes sense for the group_pa, where pa_pstart is advanced
by the length which has been used (in ext4_mb_release_context()),
and when the entire length has been used, pa_pstart has been
advanced to the first block of the next group.
However, for inode_pa, pa_pstart is never advanced; it's just
set once to the first block in the group and not moved after
that. So in this case, if we subtract one in ext4_mb_put_pa(),
we are actually locking the *previous* group, and opening the
race with the other threads which do not subtract off the extra
block.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a mount option which allows the user to disable automatic
allocation of blocks whose allocation by delayed allocation when the
file was originally truncated or when the file is renamed over an
existing file. This feature is intended to save users from the
effects of naive application writers, but it reduces the effectiveness
of the delayed allocation code. This mount option disables this
safety feature, which may be desirable for prodcutions systems where
the risk of unclean shutdowns or unexpected system crashes is low.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Thiemo Nagel reported that:
# dd if=/dev/zero of=image.ext4 bs=1M count=2
# mkfs.ext4 -v -F -b 1024 -m 0 -g 512 -G 4 -I 128 -N 1 \
-O large_file,dir_index,flex_bg,extent,sparse_super image.ext4
# mount -o loop image.ext4 mnt/
# dd if=/dev/zero of=mnt/file
oopsed, with a BUG_ON in ext4_mb_normalize_request because
size == EXT4_BLOCKS_PER_GROUP
It appears to me (esp. after talking to Andreas) that the BUG_ON
is bogus; a request of exactly EXT4_BLOCKS_PER_GROUP should
be allowed, though larger sizes do indicate a problem.
Fix that an another (apparently rare) codepath with a similar check.
Reported-by: Thiemo Nagel <thiemo.nagel@ph.tum.de>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is a short-term warning, and even printk_ratelimit() can result
in too much noise in system logs. So only print it once as a warning.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext4_ext_search_right() function is confusing; it uses a
"depth" variable which is 0 at the root and maximum at the leaves,
but the on-disk metadata uses a "depth" (actually eh_depth) which
is opposite: maximum at the root, and 0 at the leaves.
The ext4_ext_check_header() function is given a depth and checks
the header agaisnt that depth; it expects the on-disk semantics,
but we are giving it the opposite in the while loop in this
function. We should be giving it the on-disk notion of "depth"
which we can get from (p_depth - depth) - and if you look, the last
(more commonly hit) call to ext4_ext_check_header() does just this.
Sending in the wrong depth results in (incorrect) messages
about corruption:
EXT4-fs error (device sdb1): ext4_ext_search_right: bad header
in inode #2621457: unexpected eh_depth - magic f30a, entries 340,
max 340(0), depth 1(2)
http://bugzilla.kernel.org/show_bug.cgi?id=12821
Reported-by: David Dindorp <ddi@dubex.dk>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Instead of looping over all of the block groups in a flex group
summing their summary statistics, start tracking used_dirs in struct
flex_groups, and use struct flex_groups instead. This should save a
bit of CPU for mkdir-heavy workloads.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reduce pressure on the sb_bgl_lock family of locks by using atomic_t's
to track the number of free blocks and inodes in each flex_group.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Remove tuning knobs in /proc/fs/ext4/<dev/* since they have been
replaced by knobs in sysfs at /sys/fs/ext4/<dev>/*.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add basic sysfs support so that information about the mounted
filesystem and various tuning parameters can be accessed via
/sys/fs/ext4/<dev>/*.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
I was seeing fsck errors on inode bitmaps after a 4 thread
dbench run on a 4 cpu machine:
Inode bitmap differences: -50736 -(50752--50753) etc...
I believe that this is because ext4_free_inode() uses atomic
bitops, and although ext4_new_inode() *used* to also use atomic
bitops for synchronization, commit
393418676a changed this to use
the sb_bgl_lock, so that we could also synchronize against
read_inode_bitmap and initialization of uninit inode tables.
However, that change left ext4_free_inode using atomic bitops,
which I think leaves no synchronization between setting &
unsetting bits in the inode table.
The below patch fixes it for me, although I wonder if we're
getting at all heavy-handed with this spinlock...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a new superblock value which tracks the lifetime amount of writes
to the filesystem. This is useful in estimating the amount of wear on
solid state drives (SSD's) caused by writes to the filesystem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
