We use a fixed ddb allocation for the cursor. Now the calculation
actually makes sure we have enough ddb space, but let's double check
anyway.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-6-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Currently we just assume that 32 or 8 blocks of ddb is sufficient
for the cursor. The 32 might be, but the 8 is certainly not. The
minimum we need is at least what level 0 watermarks need, but that
is a bit restrictive, so instead let's calculate what level 7
would need for a 256x256 cursor. We'll use that to determine the
fixed ddb allocation for the cursor. This way the cursor will never
be responsible for missing out on deeper power saving states.
v2: Loop to make sure this works even if some wm levels are
totally disabled (latency==0)
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190319160311.23529-1-ville.syrjala@linux.intel.com
Extract the meat of skl_compute_plane_wm_params() into a lower
level helper that doesn't depend on the plane state. We'll
reuse this for the cursor ddb allocation calculations.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-4-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
skl_compute_plane_wm() doesn't actually need the plane state. While
it would make logically sense to pass it, we shall need to reuse
skl_compute_plane_wm() to compute the minimum ddb allocation for
the cursor before the cursor may be enabled. Thus we can't rely
on the plane state. The alternative would be to duplicate a lot of
the wm calculations for the cursor ddb allocation case, which doens't
appeal to me.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-3-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
If the minimum required ddb space for all the planes equals the
total ddb space available we are allowed to use the relevant
watermark level.
Cc: Neel Desai <neel.desai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-2-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
To allow unsetting .is_mobile for the desktop variant
of PNV fix up the cdclk code to select the mobile HPLLVCO register
for both PNV variants.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-5-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We want to allow the desktop PNV to not have .is_mobile set. To
that end let's add a small helper to determine if the platform
has the ASLE interrupt (or equivalent). Supposdely both PNV
variants have it.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-4-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Add a small helper to determine if we have the panel power
sequencer or not. We'll make PNV an exceptional case so
that we can unset .is_mobile for the desktop variant.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-3-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Make the code self-documenting by introducing i9xx_has_pfit().
Also make PNV an exceptional case so that we can unset
.is_mobile for the desktop variant.
v2: s/gen4/gen>=4/ (Tvrtko)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319142329.22881-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
g33/i964g/g45 are the exceptional cases when it comes to
the swizzle detection. Let's reorder the code to handle
them first and let everything else be handled by the
else branch. This allows us to unset .is_mobile for the
desktop PNV variant (which supposedly must follow the
"mobile" path here).
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Exercise acquiring and releasing forcewake around register reads. In
order to read a register behind a GT powerwell, we need to instruct that
powerwell to wake up using a forcewake. When we no longer require the GT
powerwell, we tell the GT to release our forcewake. Inside the
forcewake, the register read should work but outside it should just
return garbage, 0 being the most common garbage. Thus we can detect when
we are inside and outside of the forcewake with just a simple register
read, and so can verify that the GT powerwell is released when we say
so.
v2: Picking the right forcewaked register to return 0 outside of
forcewake is an art.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320080052.27273-1-chris@chris-wilson.co.uk
Comet Lake is a Intel Processor containing Gen9
Intel HD Graphics. This patch adds the initial set of
PCI IDs. Comet Lake comes off of Coffee Lake - adding
the IDs to Coffee Lake ID list.
More support and features will be in the patches that follow.
v2: Split IDs according to GT. (Rodrigo)
v3: Update IDs.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318200133.9666-1-anusha.srivatsa@intel.com
There is probably a issue in DMC firmwares(icl_dmc_ver1_07.bin and
kbl_dmc_ver1_04.bin at least) that causes PSR2 SU to fail after
exiting DC6 if EDP_PSR_TP1_TP3_SEL is kept in PSR_CTL, so for now
lets workaround the issue by cleaning PSR_CTL before enable PSR2.
v2:
- Updated commit description and comment to state that it may be
a DMC firmware issue (Rodrigo)
- No need to RMW, let's write 0 to PSR_CTL(Dhinakaran)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314230113.6571-1-jose.souza@intel.com
Rather than try to maintain some magic relationship between the link
rates and the index into the wrpll params array let's just store
the link rate in the array itself. Much less fragile.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207173230.22368-13-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
We already have the code to calculate the WRPLL output clock from
the register values, but for some reason we're only using it for
HDMI and not DP. Throw out the inflexible DP DPLL table lookup and
just call the HDMI code which decodes the actual register values.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207173230.22368-12-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
For virtual engines, we need to keep the HW context alive while it
remains in use. For regular HW contexts, they are created and kept alive
until the end of the GEM context. For simplicity, generalise the
requirements and keep an active reference to each HW context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318212347.30146-2-chris@chris-wilson.co.uk
On unpinning the intel_context, we remove it from the active list
inside the GEM context. This list is supposed to be guarded by the GEM
context mutex, so remember to take it!
Fixes: 7e3d9a5941 ("drm/i915: Track active engines within a context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318212347.30146-1-chris@chris-wilson.co.uk
We no longer allow mixed C99 and kernel types, and the preference is to
use kernel types exclusively. Fix the C99 types that have crept in since
the mass conversion. No functional changes.
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Kevin Strasser <kevin.strasser@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318160019.9309-1-jani.nikula@intel.com
As the final request on a ring may hold the reference to this ring (via
retiring the last pinned context), we may find ourselves chasing a
dangling pointer on completion of the list.
A quick solution is to hold a reference to the ring itself as we retire
along it so that we only free it after we stop dereferencing it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318095204.9913-4-chris@chris-wilson.co.uk
If we use the STORE_DATA_INDEX function we can use a fixed offset and
avoid having to lookup up the engine HWS address. A step closer to being
able to emit the final breadcrumb during request_add rather than later
in the submission interrupt handler.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318095204.9913-9-chris@chris-wilson.co.uk
We must remember to actually enable the post CSC gamma if
we expect the legacy LUT to work. Seems to fix NV12 crc
tests on the SDR planes. Curiously we apparently managed to
get 100% match for the HDR planes even without chopping
off the low bits.
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190315195445.26527-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Slightly verbose, but does away with hand rolled shifts. Ties the field
values with the mask defining the field.
Unfortunately we have to make a local copy of FIELD_PREP() to evaluate
to a integer constant expression. But with this, we can ensure the mask
is non-zero, power of 2, fits u32, and the value fits the mask (when the
value is a constant expression).
Convert power sequencer registers as an example.
v4:
- rebase
v3:
- rename the macro to REG_FIELD_PREP to avoid underscore prefix and to
be in line with kernel macros (Chris)
- rename power of 2 check macro (Chris)
v2:
- add build-time checks with BUILD_BUG_ON_ZERO()
- rename to just _FIELD() due to regmap.h REG_FIELD() clash
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a844edda2afa6b54d9b12a6251da02c43ea8a942.1552657998.git.jani.nikula@intel.com
bitfield.h defines FIELD_GET() and FIELD_PREP() macros to access
bitfields using the mask alone, with no need for separate shift. Indeed,
the shift is redundant.
We define REG_FIELD_GET() and REG_FIELD_PREP() wrappers for the above,
in part to force u32 and for consistency with REG_BIT() and
REG_GENMASK(), but also as we'll need to redefine REG_FIELD_PREP() in
follow-up work to make it produce integer constant expressions.
For the most part, REG_FIELD_GET() is shorter than masking followed by
shift, and arguably has more clarity.
REG_FIELD_PREP() can get more verbose than simply shifting in place, but
it does provide masking to ensure we don't overflow the mask, something
we usually don't bother with currently.
Convert power sequencer registers as an example.
v3:
- temp variable removal (Chris)
- rebase
v2:
- Add the REG_FIELD_GET() and REG_FIELD_PREP() wrappers to use them
consistently from the start.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ab68f52e55e3961bde9458c0d85a12d98ef471df.1552657998.git.jani.nikula@intel.com
Introduce REG_BIT(n) to define register bits and REG_GENMASK(h, l) to
define register bitfield masks.
We define the above as wrappers to BIT() and GENMASK() respectively to
force u32 type to go with our register size, and to add compile time
checks on the bit numbers.
The intention is that these are easier to get right and review against
the spec than hand rolled masks.
Convert power sequencer registers as an example.
v4:
- rebase
v3:
- rename macros to REG_BIT() and REG_GENMASK() to avoid underscore
prefix and to be in line with kernel macros (Chris)
- add compile time checks (Mika)
v2:
- rename macros to just _BIT() and _MASK() to reduce verbosity
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/787307c0ba9bc23471e5ff1e454b8af35771fa37.1552657998.git.jani.nikula@intel.com
We only need to acquire a wakeref for ourselves for a few operations, as
most either already acquire their own wakeref or imply a wakeref. In
particular, it is i915_gem_set_wedged() that needed us to present it
with a wakeref, which is incongruous with its "use anywhere" ability.
Suggested-by: "Yokoyama, Caz" <caz.yokoyama@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Yokoyama, Caz" <caz.yokoyama@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318095204.9913-7-chris@chris-wilson.co.uk
We assumed that vm_mmap() would reject an attempt to mmap past the end of
the filp (our object), but we were wrong.
Applications that tried to use the mmap beyond the end of the object
would be greeted by a SIGBUS. After this patch, those applications will
be told about the error on creating the mmap, rather than at a random
moment on later access.
Reported-by: Antonio Argenziano <antonio.argenziano@intel.com>
Testcase: igt/gem_mmap/bad-size
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314075829.16838-1-chris@chris-wilson.co.uk
The only usage we have for it is for the regs pointer. Save a pointer to
the set and ack registers instead of the register offsets to remove this
requirement
v2: Keep passing uncore down to the lowest levels to avoid repeated
pointer chasing in the innermost loops:
add/remove: 0/0 grow/shrink: 3/15 up/down: 33/-155 (-122)
Function old new delta
fw_domain_init 320 351 +31
hdmi_port_clock_valid 319 320 +1
g4x_pre_enable_dp 364 365 +1
ring_request_alloc 1852 1851 -1
intel_engine_lookup_user 50 49 -1
gen11_irq_handler 738 737 -1
__intel_uncore_forcewake_get 115 112 -3
intel_uncore_fw_release_timer 198 194 -4
i915_forcewake_domains 154 150 -4
fw_domain_fini 172 168 -4
__intel_uncore_forcewake_put 163 159 -4
___force_wake_auto 138 134 -4
fw_domains_put 98 92 -6
__err_print_to_sgl 4058 4052 -6
intel_uncore_forcewake_reset 459 444 -15
fw_domains_get 563 548 -15
fw_domain_wait_ack_with_fallback 490 450 -40
fw_domains_get_with_fallback 875 828 -47
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313231319.711-2-daniele.ceraolospurio@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190316100045.20240-1-chris@chris-wilson.co.uk
ffs() is 1-indexed, but we want to use it as an index into an array, so
use __ffs() instead.
Fixes: eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190315163933.19352-1-chris@chris-wilson.co.uk
Split the csc matrix handling to ilk+ and icl+ functions.
This keeps the logic clear on what is loaded into which
CSC unit on the hardware.
We also fix the icl+ code to load the full->limited range
conversion matrix into the output CSC rather than the pipe
CSC which was used on earlier platforms. And we also turn
on the pipe CSC only when the ctm is present.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218193137.22914-8-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Just provide precomputed CSC matrices for the identity and
limited range cases. This removes the remaining nuts and bolts
stuff from ilk_load_csc_matrix(), allowing one to actually
see the high level logic.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218193137.22914-7-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
