setup_cluster_no_bitmap() searches all the extents and bitmaps starting
from offset. Therefore if it returns -ENOSPC, all the bitmaps starting
from offset are in the bitmaps list, so it's sufficient to search from
this list in setup_cluser_bitmap().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Suppose there are two bitmaps [0, 256], [256, 512] and one extent
[100, 120] in the free space cache, and we want to setup a cluster
with offset=100, bytes=50.
In this case, there will be only one bitmap [256, 512] in the temporary
bitmaps list, and then setup_cluster_bitmap() won't search bitmap [0, 256].
The cause is, the list is constructed in setup_cluster_no_bitmap(),
and only bitmaps with bitmap_entry->offset >= offset will be added
into the list, and the very bitmap that convers offset has
bitmap_entry->offset <= offset.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
My previous patch introduced some u64 for failed_mirror variables, this one
makes it consistent again.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch casts to unsigned long before casting to a pointer and fixes
the following warnings:
fs/btrfs/extent_io.c:2289:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
fs/btrfs/ioctl.c:2933:37: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
fs/btrfs/ioctl.c:2937:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
fs/btrfs/ioctl.c:3020:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
fs/btrfs/scrub.c:275:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
fs/btrfs/backref.c:686:27: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When btrfs is writing the super blocks, it send barrier flushes to make
sure writeback caching drives get all the metadata on disk in the
right order.
But, we have two bugs in the way these are sent down. When doing
full commits (not via the tree log), we are sending the barrier down
before the last super when it should be going down before the first.
In multi-device setups, we should be waiting for the barriers to
complete on all devices before writing any of the supers.
Both of these bugs can cause corruptions on power failures. We fix it
with some new code to send down empty barriers to all devices before
writing the first super.
Alexandre Oliva found the multi-device bug. Arne Jansen did the async
barrier loop.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Reported-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
Prevent tracing of preempt_disable() in get_cpu_var() in
kvm_clock_read(). When CONFIG_DEBUG_PREEMPT is enabled,
preempt_disable/enable() are traced and this causes the function_graph
tracer to go into an infinite recursion. By open coding the
preempt_disable() around the get_cpu_var(), we can use the notrace
version which prevents preempt_disable/enable() from being traced and
prevents the recursion.
Based on a similar patch for Xen from Jeremy Fitzhardinge.
Tested-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
This adds a new optional chunk to the CS ioctl that specifies optional flags
to the CS parser. Why this is useful is explained below. Note that some regs
no longer need the NOP relocation packet if this feature is enabled.
Tested on r300g and r600g with this flag disabled and enabled.
Assume there are two contexts sharing the same mipmapped tiled texture.
One context wants to render into the first mipmap and the other one
wants to render into the last mipmap. As you probably know, the hardware
has a MACRO_SWITCH feature, which turns off macro tiling for small mipmaps,
but that only applies to samplers.
(at least on r300-r500, though later hardware likely behaves the same)
So we want to just re-set the tiling flags before rendering (writing
packets), right? ... No. The contexts run in parallel, so they may
set the tiling flags simultaneously and then fire their command streams
also simultaneously. The last one setting the flags wins, the other one
loses.
Another problem is when one context wants to render into the first and
the last mipmap in one CS. Impossible. It must flush before changing
tiling flags and do the rendering into the smaller mipmaps in another CS.
Yet another problem is that writing copy_blit in userspace would be a mess
involving re-setting tiling flags to please the kernel, and causing races
with other contexts at the same time.
The only way out of this is to send tiling flags with each CS, ideally
with each relocation. But we already do that through the registers.
So let's just use what we have in the registers.
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (exynos4_tmu) Fix Kconfig dependency
[ Merging code in-flight, just because I can. What timezone should I
use? - Linus ]
Newer versions of MINIX can create filesystems that allocate an extra
bitmap block. Mounting of this succeeds, but doing a statfs call will
result in an oops in count_free because of a negative number being used
for the bh index.
Avoid this by verifying the number of allocated blocks at mount time,
erroring out if there are not enough and make statfs ignore the extras
if there are too many.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=18792
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
After commit 2a77c46de1
(PM / Suspend: Add statistics debugfs file for suspend to RAM)
a missing pair of braces inside the state_store() function causes even
invalid arguments to suspend to be wrongly treated as failed suspend
attempts. Fix this.
[rjw: Put the hash/subject of the buggy commit into the changelog.]
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
No longer at Citrix, still interested in Xen.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dummy, non-zero definitions for HPAGE_MASK and HPAGE_SIZE were added in
51c6f666fc ("mm: ZAP_BLOCK causes redundant work") to avoid a divide
by zero in generic kernel code.
That code has since been removed, but probably should never have been
added in the first place: we don't want HPAGE_SIZE to act like PAGE_SIZE
for code that is working with hugepages, for example, when the
dependency on CONFIG_HUGETLB_PAGE has not been fulfilled.
Because hugepage size can differ from architecture to architecture, each
is required to have their own definitions for both HPAGE_MASK and
HPAGE_SIZE. This is always done in arch/*/include/asm/page.h.
So, just remove the dummy and dangerous definitions since they are no
longer needed and reveals the correct dependencies. Tested on
architectures using the definitions with allyesconfig: x86 (even with
thp), hppa, mips, powerpc, s390, sh3, sh4, sparc, and sparc64, and with
defconfig on ia64.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
new helper: mount_subtree()
switch create_mnt_ns() to saner calling conventions, fix double mntput() in nfs
btrfs: fix double mntput() in mount_subvol()
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
random: Fix handing of arch_get_random_long in get_random_bytes()
x86: Call stop_machine_text_poke() on all CPUs
x86, ioapic: Only print ioapic debug information for IRQs belonging to an ioapic chip
x86/mrst: Avoid reporting wrong nmi status
x86/mrst: Add support for Penwell clock calibration
x86/apic: Allow use of lapic timer early calibration result
x86/apic: Do not clear nr_irqs_gsi if no legacy irqs
x86/platform: Add a wallclock_init func to x86_platforms ops
x86/mce: Make mce_chrdev_ops 'static const'
Randy Dunlap reports that the ex131x driver doesn't build when CONFIG_PM_SLEEP is not enabled.
This bug was introduced when moving code around to remove some forward declarations earlier, the #endif part of #ifdef CONFIG_PM_SLEEP was not moved at the same time. Now fixed by moving it to its proper place.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As is probably painfully obvious, I don't have time to be a cgroups
maintainer. Rather than have me continue to hope that I'll magically
find more spare time, instead Tejun has kindly agreed to take over the
role, along with Li Zefan.
-tj: added cgroup tree URL to MAINTAINERS file
Signed-off-by: Paul Menage <paul@paulmenage.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <1321320612-57855-1-git-send-email-paul@paulmenage.org>
Commit 2aede851dd
(PM / Hibernate: Freeze kernel threads after preallocating memory)
postponed the freezing of kernel threads to after preallocating memory
for hibernation. But while doing that, the hibernation test TEST_FREEZER
and the test mode HIBERNATION_TESTPROC were not moved accordingly.
As a result, when using these test modes, it only goes upto the freezing of
userspace and exits, when in fact it should go till the complete end of task
freezing stage, namely the freezing of kernel threads as well.
So, move these points of exit to appropriate places so that freezing of
kernel threads is also tested while using these test harnesses.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
commit f39925dbde (ipv4: Cache learned redirect information in
inetpeer.) introduced a regression in ICMP redirect handling.
It assumed ipv4_dst_check() would be called because all possible routes
were attached to the inetpeer we modify in ip_rt_redirect(), but thats
not true.
commit 7cc9150ebe (route: fix ICMP redirect validation) tried to fix
this but solution was not complete. (It fixed only one route)
So we must lookup existing routes (including different TOS values) and
call check_peer_redir() on them.
Reported-by: Ivan Zahariev <famzah@icdsoft.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I will no longer be maintaining XFS for SGI. Ben Myers
(bpm@sgi.com) has agreed to be the primary maintainer
for XFS in my place. I will continue to be able to push
commits to the SGI XFS tree if required. As such I will
continue to be a designated XFS maintainer, but plan to
serve in more of a backup role.
Signed-off-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
ping module incorrectly increments ICMP_MIB_INERRORS if feeded with a
frame not belonging to its own sockets.
RFC 2011 states that ICMP_MIB_INERRORS should count "the number of ICMP
messages which the entiry received but determined as having
ICMP-specific errors (bad ICMP checksums, bad length, etc.)."
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix for ftdi_set_termios() glitching output
ftdi_set_termios() is constantly setting the baud rate, data bits and parity
unnecessarily on every call, . When called while characters are being
transmitted can cause the FTDI chip to corrupt the serial port bit stream
output by stalling the output half a bit during the output of a character.
Simple fix by skipping this setting if the baud rate/data bits/parity are
unchanged.
Signed-off-by: Andrew Worsley <amworsley@gmail.com>
Cc: stable <stable@vger.kernel.org>
----
I had a brief run with strace on the getty and it was doing ioctl()s on
each call but it didn't look relavant to the problem. I think the issue is
that XON/XOFF flow control was being implmented via hardware - for the ixoff
to allow the user to use XON/XOFF to control output. Unfortunately it would
send 3 Control URBs updating all of the settings after each piece of input
I am trying to work around the issue of gmail messing with the tab/spacing
by submitting via SMTP via gmail which I believe should fix the issue.
The patch is against v3.2-rc2 and compiles - but no additional testing in
this kernel has been done.
Thanks
Andrew
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Problems with NVIDIA's OHCI host controllers persist. After looking
carefully through the spec, I finally realized that when a controller
is reset it then automatically goes into a SUSPEND state in which it
is completely quiescent (no DMA and no IRQs) and from which it will
not awaken until the system puts it into the OPERATIONAL state.
Therefore there's no need to worry about controllers being in the
RESET state for extended periods, or remaining in the OPERATIONAL
state during system shutdown. The proper action for device
initialization is to put the controller into the RESET state (if it's
not there already) and then to issue a software reset. Similarly, the
proper action for device shutdown is simply to do a software reset.
This patch (as1499) implements such an approach. It simplifies
initialization and shutdown, and allows the NVIDIA shutdown-quirk code
to be removed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Andre "Osku" Schmidt <andre.osku.schmidt@googlemail.com>
Tested-by: Arno Augustin <Arno.Augustin@web.de>
Cc: stable <stable@vger.kernel.org> [after tested in 3.2 for a while]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds new PIDs for ZTE 3G modem, after we confirm it and tested.
Thanks for Dan's work at kernel option devier.
Signed-off-by: Alvin.Zheng <zheng.zhijian@zte.com.cn>
Signed-off-by: wsalvin <wsalvin@yahoo.com.cn>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix compile error, HC_LENGTH now takes two parameters and ehci
needs to be passed as the first parameter.
Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Patch to fix the error message "directives may not be used inside a macro
argument" which appears when the kernel is compiled for the cris architecture.
Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Let's say we have "OUTPUT_DIR = build/${TEST_NAME}", and we're iterating
a test. In the second iteration of a test, the TEST_NAME of the test
we're repeating is not used. Instead, ${TEST_NAME} appears literally:
touch /home/rabin/kernel/test/build/${TEST_NAME}/.config ... SUCCESS
Fix this by making __eval_option() check the parent test options
for a repeated test.
Link: http://lkml.kernel.org/r/1321616131-21352-2-git-send-email-rabin@rab.in
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen-gntalloc: signedness bug in add_grefs()
xen-gntalloc: integer overflow in gntalloc_ioctl_alloc()
xen-gntdev: integer overflow in gntdev_alloc_map()
xen:pvhvm: enable PVHVM VCPU placement when using more than 32 CPUs.
xen/balloon: Avoid OOM when requesting highmem
xen: Remove hanging references to CONFIG_XEN_PLATFORM_PCI
xen: map foreign pages for shared rings by updating the PTEs directly
* 'for-linus' of git://git.kernel.dk/linux-block:
block: add missed trace_block_plug
paride: fix potential information leak in pg_read()
bio: change some signed vars to unsigned
block: avoid unnecessary plug list flush
cciss: auto engage SCSI mid layer at driver load time
loop: cleanup set_status interface
include/linux/bio.h: use a static inline function for bio_integrity_clone()
loop: prevent information leak after failed read
block: Always check length of all iov entries in blk_rq_map_user_iov()
The Windows driver .inf disables ASPM on all cciss devices. Do the same.
backing-dev: ensure wakeup_timer is deleted
block: Revert "[SCSI] genhd: add a new attribute "alias" in gendisk"
* 'unicore32' of git://github.com/gxt/linux:
unicore32, exec: remove redundant set_fs(USER_DS)
unicore32: Fix typo 'PUV3_I2C'
unicore32: drop unused Kconfig symbols
rtc: rtc-puv3: Add __devinit and __devexit markers for probe and remove
arch/unicore32: do not use EXTRA_AFLAGS or EXTRA_CFLAGS
unicore32: fix build error for find bitops
Current code calculates scaling factors for video overlays even when the
overlays are not scaled. Change the code to skip calculations when not
scaling.
This optimizes the code a bit, but also fixes a problem when configuring
an overlay for a disabled display: if the display is disabled we don't
necessarily know the pixel clock used when the display is enabled, and
in some cases (like HDMI) the pixel clock is set to zero until a proper
video mode is set later. A wrong pixel clock will mess up the
scaling calculations, causing an error like:
omapdss DISPC error: failed to set up scaling, required fclk rate = 0
Hz, current fclk rate = 170666666 Hz
A proper fix would be to check later whether the clocks are enough for the
scaling, at the point when the overlay or display is actually enabled,
but this patch removes the problem for now.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fix warnings similar to this by including module.h:
drivers/video/omap/dispc.c:276:1: warning: data definition has no type
or storage class
drivers/video/omap/dispc.c:276:1: warning: type defaults to 'int' in
declaration of 'EXPORT_SYMBOL'
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
hdmi_get_pixel_clock() returns the pixel clock in Hz, but the pck is
stored as kHz. This means the return value has to be multiplied by 1000,
not by 10000 as the code did.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Some of the sun4v code patching occurs in inline functions visible
to, and usable by, modules.
Therefore we have to patch them up during module load.
Signed-off-by: David S. Miller <davem@davemloft.net>
If IRQ was never initialized, then calling napi_disable() would hang.
Add more bookkeeping to track whether IRQ was ever initialized.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hardware has a restriction that the minimum ring size possible
is 128. The number of elements used is controlled by tx_pending and
the overall number of elements in the ring tx_ring_size, therefore it
is okay to limit the number of elements in use to a small value (63)
but still provide a bigger ring.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To handle the large physical addresses, just make a simple wrapper
around remap_pfn_range() like MIPS does.
Signed-off-by: David S. Miller <davem@davemloft.net>
When changing mode via bonding's sysfs, the slaves are not initialized
correctly. Forbid to change modes with slaves present to ensure that every
slave is initialized correctly via bond_enslave().
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Acked-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
