Commit Graph

106 Commits

Author SHA1 Message Date
Kees Cook
d2ec3f77de pty: make ptmx file ops read-only after init
The ptmx_fops structure is only changed during init, so mark it as such.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15 12:47:03 +02:00
Colin Ian King
5353ed8dee devpts: fix null pointer dereference on failed memory allocation
An ENOMEM when creating a pair tty in tty_ldisc_setup causes a null
pointer dereference in devpts_kill_index because tty->link->driver_data
is NULL.  The oops was triggered with the pty stressor in stress-ng when
in a low memory condition.

tty_init_dev tries to clean up a tty_ldisc_setup ENOMEM error by calling
release_tty, however, this ultimately tries to clean up the NULL pair'd
tty in pty_unix98_remove, triggering the Oops.

Add check to pty_unix98_remove to only clean up fsi if it is not NULL.

Ooops:

[   23.020961] Oops: 0000 [#1] SMP
[   23.020976] Modules linked in: ppdev snd_hda_codec_generic snd_hda_intel snd_hda_codec parport_pc snd_hda_core snd_hwdep parport snd_pcm input_leds joydev snd_timer serio_raw snd soundcore i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel qxl aes_x86_64 ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect psmouse sysimgblt floppy fb_sys_fops drm pata_acpi jitterentropy_rng drbg ansi_cprng
[   23.020978] CPU: 0 PID: 1452 Comm: stress-ng-pty Not tainted 4.7.0-rc4+ #2
[   23.020978] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[   23.020979] task: ffff88007ba30000 ti: ffff880078ea8000 task.ti: ffff880078ea8000
[   23.020981] RIP: 0010:[<ffffffff813f11ff>]  [<ffffffff813f11ff>] ida_remove+0x1f/0x120
[   23.020981] RSP: 0018:ffff880078eabb60  EFLAGS: 00010a03
[   23.020982] RAX: 4444444444444567 RBX: 0000000000000000 RCX: 000000000000001f
[   23.020982] RDX: 000000000000014c RSI: 000000000000026f RDI: 0000000000000000
[   23.020982] RBP: ffff880078eabb70 R08: 0000000000000004 R09: 0000000000000036
[   23.020983] R10: 000000000000026f R11: 0000000000000000 R12: 000000000000026f
[   23.020983] R13: 000000000000026f R14: ffff88007c944b40 R15: 000000000000026f
[   23.020984] FS:  00007f9a2f3cc700(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
[   23.020984] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   23.020985] CR2: 0000000000000010 CR3: 000000006c81b000 CR4: 00000000001406f0
[   23.020988] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   23.020988] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   23.020988] Stack:
[   23.020989]  0000000000000000 000000000000026f ffff880078eabb90 ffffffff812a5a99
[   23.020990]  0000000000000000 00000000fffffff4 ffff880078eabba8 ffffffff814f9cbe
[   23.020991]  ffff88007965c800 ffff880078eabbc8 ffffffff814eef43 fffffffffffffff4
[   23.020991] Call Trace:
[   23.021000]  [<ffffffff812a5a99>] devpts_kill_index+0x29/0x50
[   23.021002]  [<ffffffff814f9cbe>] pty_unix98_remove+0x2e/0x50
[   23.021006]  [<ffffffff814eef43>] release_tty+0xb3/0x1b0
[   23.021007]  [<ffffffff814f18d4>] tty_init_dev+0xd4/0x1c0
[   23.021011]  [<ffffffff814f9fae>] ptmx_open+0xae/0x190
[   23.021013]  [<ffffffff812254ef>] chrdev_open+0xbf/0x1b0
[   23.021015]  [<ffffffff8121d973>] do_dentry_open+0x203/0x310
[   23.021016]  [<ffffffff81225430>] ? cdev_put+0x30/0x30
[   23.021017]  [<ffffffff8121ee44>] vfs_open+0x54/0x80
[   23.021018]  [<ffffffff8122b8fc>] ? may_open+0x8c/0x100
[   23.021019]  [<ffffffff8122f26b>] path_openat+0x2eb/0x1440
[   23.021020]  [<ffffffff81230534>] ? putname+0x54/0x60
[   23.021022]  [<ffffffff814f6f97>] ? n_tty_ioctl_helper+0x27/0x100
[   23.021023]  [<ffffffff81231651>] do_filp_open+0x91/0x100
[   23.021024]  [<ffffffff81230596>] ? getname_flags+0x56/0x1f0
[   23.021026]  [<ffffffff8123fc66>] ? __alloc_fd+0x46/0x190
[   23.021027]  [<ffffffff8121f1e4>] do_sys_open+0x124/0x210
[   23.021028]  [<ffffffff8121f2ee>] SyS_open+0x1e/0x20
[   23.021035]  [<ffffffff81845576>] entry_SYSCALL_64_fastpath+0x1e/0xa8
[   23.021044] Code: 63 28 45 31 e4 eb dd 0f 1f 44 00 00 55 4c 63 d6 48 ba 89 88 88 88 88 88 88 88 4c 89 d0 b9 1f 00 00 00 48 f7 e2 48 89 e5 41 54 53 <8b> 47 10 48 89 fb 8d 3c c5 00 00 00 00 48 c1 ea 09 b8 01 00 00
[   23.021045] RIP  [<ffffffff813f11ff>] ida_remove+0x1f/0x120
[   23.021045]  RSP <ffff880078eabb60>
[   23.021046] CR2: 0000000000000010

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26 11:39:00 -07:00
Eric W. Biederman
eedf265aa0 devpts: Make each mount of devpts an independent filesystem.
The /dev/ptmx device node is changed to lookup the directory entry "pts"
in the same directory as the /dev/ptmx device node was opened in.  If
there is a "pts" entry and that entry is a devpts filesystem /dev/ptmx
uses that filesystem.  Otherwise the open of /dev/ptmx fails.

The DEVPTS_MULTIPLE_INSTANCES configuration option is removed, so that
userspace can now safely depend on each mount of devpts creating a new
instance of the filesystem.

Each mount of devpts is now a separate and equal filesystem.

Reserved ttys are now available to all instances of devpts where the
mounter is in the initial mount namespace.

A new vfs helper path_pts is introduced that finds a directory entry
named "pts" in the directory of the passed in path, and changes the
passed in path to point to it.  The helper path_pts uses a function
path_parent_directory that was factored out of follow_dotdot.

In the implementation of devpts:
 - devpts_mnt is killed as it is no longer meaningful if all mounts of
   devpts are equal.
 - pts_sb_from_inode is replaced by just inode->i_sb as all cached
   inodes in the tty layer are now from the devpts filesystem.
 - devpts_add_ref is rolled into the new function devpts_ptmx.  And the
   unnecessary inode hold is removed.
 - devpts_del_ref is renamed devpts_release and reduced to just a
   deacrivate_super.
 - The newinstance mount option continues to be accepted but is now
   ignored.

In devpts_fs.h definitions for when !CONFIG_UNIX98_PTYS are removed as
they are never used.

Documentation/filesystems/devices.txt is updated to describe the current
situation.

This has been verified to work properly on openwrt-15.05, centos5,
centos6, centos7, debian-6.0.2, debian-7.9, debian-8.2, ubuntu-14.04.3,
ubuntu-15.10, fedora23, magia-5, mint-17.3, opensuse-42.1,
slackware-14.1, gentoo-20151225 (13.0?), archlinux-2015-12-01.  With the
caveat that on centos6 and on slackware-14.1 that there wind up being
two instances of the devpts filesystem mounted on /dev/pts, the lower
copy does not end up getting used.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jann@thejh.net>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-05 10:36:01 -07:00
Greg Kroah-Hartman
10ee082920 Merge 4.6-rc7 into tty-next
We want the pty fixes in here as well so that patches can build on it.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09 09:39:13 +02:00
Brian Bloniarz
0f40fbbcc3 Fix OpenSSH pty regression on close
OpenSSH expects the (non-blocking) read() of pty master to return
EAGAIN only if it has received all of the slave-side output after
it has received SIGCHLD. This used to work on pre-3.12 kernels.

This fix effectively forces non-blocking read() and poll() to
block for parallel i/o to complete for all ttys. It also unwinds
these changes:

1) f8747d4a46
   tty: Fix pty master read() after slave closes

2) 52bce7f8d4
   pty, n_tty: Simplify input processing on final close

3) 1a48632ffe
   pty: Fix input race when closing

Inspired by analysis and patch from Marc Aurele La France <tsi@tuyoix.net>

Reported-by: Volth <openssh@volth.com>
Reported-by: Marc Aurele La France <tsi@tuyoix.net>
BugLink: https://bugzilla.mindrot.org/show_bug.cgi?id=52
BugLink: https://bugzilla.mindrot.org/show_bug.cgi?id=2492
Signed-off-by: Brian Bloniarz <brian.bloniarz@gmail.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 13:22:54 -07:00
Peter Hurley
18900ca65a tty: Replace TTY_IO_ERROR bit tests with tty_io_error()
Abstract TTY_IO_ERROR status test treewide with tty_io_error().
NB: tty->flags uses atomic bit ops; replace non-atomic bit test
with test_bit().

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Linus Torvalds
8ead9dd547 devpts: more pty driver interface cleanups
This is more prep-work for the upcoming pty changes.  Still just code
cleanup with no actual semantic changes.

This removes a bunch pointless complexity by just having the slave pty
side remember the dentry associated with the devpts slave rather than
the inode.  That allows us to remove all the "look up the dentry" code
for when we want to remove it again.

Together with moving the tty pointer from "inode->i_private" to
"dentry->d_fsdata" and getting rid of pointless inode locking, this
removes about 30 lines of code.  Not only is the end result smaller,
it's simpler and easier to understand.

The old code, for example, depended on the d_find_alias() to not just
find the dentry, but also to check that it is still hashed, which in
turn validated the tty pointer in the inode.

That is a _very_ roundabout way to say "invalidate the cached tty
pointer when the dentry is removed".

The new code just does

	dentry->d_fsdata = NULL;

in devpts_pty_kill() instead, invalidating the tty pointer rather more
directly and obviously.  Don't do something complex and subtle when the
obvious straightforward approach will do.

The rest of the patch (ie apart from code deletion and the above tty
pointer clearing) is just switching the calling convention to pass the
dentry or file pointer around instead of the inode.

Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jann@thejh.net>
Cc: Greg KH <greg@kroah.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-26 15:47:32 -07:00
Linus Torvalds
67245ff332 devpts: clean up interface to pty drivers
This gets rid of the horrible notion of having that

    struct inode *ptmx_inode

be the linchpin of the interface between the pty code and devpts.

By de-emphasizing the ptmx inode, a lot of things actually get cleaner,
and we will have a much saner way forward.  In particular, this will
allow us to associate with any particular devpts instance at open-time,
and not be artificially tied to one particular ptmx inode.

The patch itself is actually fairly straightforward, and apart from some
locking and return path cleanups it's pretty mechanical:

 - the interfaces that devpts exposes all take "struct pts_fs_info *"
   instead of "struct inode *ptmx_inode" now.

   NOTE! The "struct pts_fs_info" thing is a completely opaque structure
   as far as the pty driver is concerned: it's still declared entirely
   internally to devpts. So the pty code can't actually access it in any
   way, just pass it as a "cookie" to the devpts code.

 - the "look up the pts fs info" is now a single clear operation, that
   also does the reference count increment on the pts superblock.

   So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get
   ref" operation (devpts_get_ref(inode)), along with a "put ref" op
   (devpts_put_ref()).

 - the pty master "tty->driver_data" field now contains the pts_fs_info,
   not the ptmx inode.

 - because we don't care about the ptmx inode any more as some kind of
   base index, the ref counting can now drop the inode games - it just
   gets the ref on the superblock.

 - the pts_fs_info now has a back-pointer to the super_block. That's so
   that we can easily look up the information we actually need. Although
   quite often, the pts fs info was actually all we wanted, and not having
   to look it up based on some magical inode makes things more
   straightforward.

In particular, now that "devpts_get_ref(inode)" operation should really
be the *only* place we need to look up what devpts instance we're
associated with, and we do it exactly once, at ptmx_open() time.

The other side of this is that one ptmx node could now be associated
with multiple different devpts instances - you could have a single
/dev/ptmx node, and then have multiple mount namespaces with their own
instances of devpts mounted on /dev/pts/.  And that's all perfectly sane
in a model where we just look up the pts instance at open time.

This will eventually allow us to get rid of our odd single-vs-multiple
pts instance model, but this patch in itself changes no semantics, only
an internal binding model.

Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jann@thejh.net>
Cc: Greg KH <greg@kroah.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-18 13:43:02 -07:00
Greg Kroah-Hartman
249f3c4fe4 Merge 4.5-rc4 into tty-next
We want the fixes in here, and this resolves a merge error in tty_io.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-14 14:36:04 -08:00
Herton R. Krzesinski
1f55c718c2 pty: make sure super_block is still valid in final /dev/tty close
Considering current pty code and multiple devpts instances, it's possible
to umount a devpts file system while a program still has /dev/tty opened
pointing to a previosuly closed pty pair in that instance. In the case all
ptmx and pts/N files are closed, umount can be done. If the program closes
/dev/tty after umount is done, devpts_kill_index will use now an invalid
super_block, which was already destroyed in the umount operation after
running ->kill_sb. This is another "use after free" type of issue, but now
related to the allocated super_block instance.

To avoid the problem (warning at ida_remove and potential crashes) for
this specific case, I added two functions in devpts which grabs additional
references to the super_block, which pty code now uses so it makes sure
the super block structure is still valid until pty shutdown is done.
I also moved the additional inode references to the same functions, which
also covered similar case with inode being freed before /dev/tty final
close/shutdown.

Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Cc: stable@vger.kernel.org # 2.6.29+
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-06 23:45:46 -08:00
Herton R. Krzesinski
2831c89f42 pty: fix possible use after free of tty->driver_data
This change fixes a bug for a corner case where we have the the last
release from a pty master/slave coming from a previously opened /dev/tty
file. When this happens, the tty->driver_data can be stale, due to all
ptmx or pts/N files having already been closed before (and thus the inode
related to these files, which tty->driver_data points to, being already
freed/destroyed).

The fix here is to keep a reference on the opened master ptmx inode.
We maintain the inode referenced until the final pty_unix98_shutdown,
and only pass this inode to devpts_kill_index.

Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Cc: <stable@vger.kernel.org> # 2.6.29+
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-06 23:45:46 -08:00
Peter Hurley
9db276f8f0 tty: Use termios c_*flag macros
Expressions of the form "tty->termios.c_*flag & FLAG"
are more clearly expressed with the termios flags macros,
I_FLAG(), C_FLAG(), O_FLAG(), and L_FLAG().

Convert treewide.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28 14:13:44 -08:00
Peter Hurley
c1e33af1ed pty: Remove pty_unix98_shutdown()
The tty core invokes the optional driver shutdown() just before
the optional driver remove() (shutdown() has access to the termios
and remove() does not). Because pty drivers must prevent the default
remove() action, the Unix98 pty drivers define a dummy remove() function.

Instead, release the slave index in the remove() method and delete the
optional shutdown() method.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27 14:28:20 -08:00
Peter Hurley
a3123fd0a4 tty: Fix tty_init_termios() declaration
tty_init_termios() never returns an error; re-declare as void. Remove
unnecessary error handling from callers. Remove extern declarations
of tty_free_termios() and free_tty_struct() and re-declare in file
scope.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27 14:28:20 -08:00
Peter Hurley
c8b710b3e4 tty: Fix ldisc leak in failed tty_init_dev()
release_tty() leaks the ldisc instance when called directly (rather
than when releasing the file descriptor from tty_release()).

Since tty_ldisc_release() clears tty->ldisc, releasing the ldisc
instance at tty teardown if tty->ldisc is non-null is not in danger
of double-releasing the ldisc.

Remove deinitialize_tty_struct() now that free_tty_struct() always
performs the tty_ldisc_deinit().

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27 14:28:20 -08:00
Peter Hurley
d435cefe9c tty: Remove __func__ from tty_debug() macro
Now that tty_debug() macro uses pr_debug(), the function name can
be printed when using dynamic debug; printing the function name within
the format string is redundant.

Remove the __func__ parameter and print specifier from the format string.
Add context to messages for when the function name is not printed by
dynamic debug, or when dynamic debug is not enabled.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13 19:59:48 -08:00
Paul Gortmaker
7154988fec drivers/tty: make pty.c slightly more explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/tty/Kconfig:config LEGACY_PTYS
drivers/tty/Kconfig:    bool "Legacy (BSD) PTY support"

...and:

drivers/tty/Kconfig:config UNIX98_PTYS
drivers/tty/Kconfig:    bool "Unix98 PTY support" if EXPERT

combined with this:

obj-$(CONFIG_LEGACY_PTYS)       += pty.o
obj-$(CONFIG_UNIX98_PTYS)       += pty.o

...meaning that it currently is not being built as a module by anyone.

Lets remove the traces of modularity we can so that when reading the
driver there is less doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

We don't delete the module.h include since other parts of the file are
using content from there.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04 17:27:56 +01:00
Peter Hurley
d684779335 pty: Add debug message for ptmx open
Opens of /dev/ptmx don't use tty_open() so debug messages are
not printed for those opens; print a debug message with the
open count (which must always be 1) if TTY_DEBUG_HANGUP is defined.

NB: Each tty core source file undefs support for debug messages.
The relevant source file must be patched/edited to enable these
messages.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 18:37:32 -07:00
Peter Hurley
1a48632ffe pty: Fix input race when closing
A read() from a pty master may mistakenly indicate EOF (errno == -EIO)
after the pty slave has closed, even though input data remains to be read.
For example,

       pty slave       |        input worker        |    pty master
                       |                            |
                       |                            |   n_tty_read()
pty_write()            |                            |     input avail? no
  add data             |                            |     sleep
  schedule worker  --->|                            |     .
                       |---> flush_to_ldisc()       |     .
pty_close()            |       fill read buffer     |     .
  wait for worker      |       wakeup reader    --->|     .
                       |       read buffer full?    |---> input avail ? yes
                       |<---   yes - exit worker    |     copy 4096 bytes to user
  TTY_OTHER_CLOSED <---|                            |<--- kick worker
                       |                            |

		                **** New read() before worker starts ****

                       |                            |   n_tty_read()
                       |                            |     input avail? no
                       |                            |     TTY_OTHER_CLOSED? yes
                       |                            |     return -EIO

Several conditions are required to trigger this race:
1. the ldisc read buffer must become full so the input worker exits
2. the read() count parameter must be >= 4096 so the ldisc read buffer
   is empty
3. the subsequent read() occurs before the kicked worker has processed
   more input

However, the underlying cause of the race is that data is pipelined, while
tty state is not; ie., data already written by the pty slave end is not
yet visible to the pty master end, but state changes by the pty slave end
are visible to the pty master end immediately.

Pipeline the TTY_OTHER_CLOSED state through input worker to the reader.
1. Introduce TTY_OTHER_DONE which is set by the input worker when
   TTY_OTHER_CLOSED is set and either the input buffers are flushed or
   input processing has completed. Readers/polls are woken when
   TTY_OTHER_DONE is set.
2. Reader/poll checks TTY_OTHER_DONE instead of TTY_OTHER_CLOSED.
3. A new input worker is started from pty_close() after setting
   TTY_OTHER_CLOSED, which ensures the TTY_OTHER_DONE state will be
   set if the last input worker is already finished (or just about to
   exit).

Remove tty_flush_to_ldisc(); no in-tree callers.

Fixes: 52bce7f8d4 ("pty, n_tty: Simplify input processing on final close")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96311
BugLink: http://bugs.launchpad.net/bugs/1429756
Cc: <stable@vger.kernel.org> # 3.19+
Reported-by: Andy Whitcroft <apw@canonical.com>
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10 19:26:37 +02:00
Peter Hurley
d2b6f44779 n_tty: Fix signal handling flushes
BRKINT and ISIG requires input and output flush when a signal char
is received. However, the order of operations is significant since
parallel i/o may be ongoing.

Merge the signal handling for BRKINT with ISIG handling.

Process the signal first. This ensures any ongoing i/o is aborted;
without this, a waiting writer may continue writing after the flush
occurs and after the signal char has been echoed.

Write lock the termios_rwsem, which excludes parallel writers from
pushing new i/o until after the output buffers are flushed; claiming
the write lock is necessary anyway to exclude parallel readers while
the read buffer is flushed.

Subclass the termios_rwsem for ptys since the slave pty performing
the flush may appear to reorder the termios_rwsem->tty buffer lock
lock order; adding annotation clarifies that
  slave tty_buffer lock-> slave termios_rwsem -> master tty_buffer lock
is a valid lock order.

Flush the echo buffer. In this context, the echo buffer is 'output'.
Otherwise, the output will appear discontinuous because the output buffer
was cleared which contains older output than the echo buffer.

Open-code the read buffer flush since the input worker does not need
kicking (this is the input worker).

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02 10:11:27 -08:00
Peter Hurley
1d1d14da12 pty: Fix buffer flush deadlock
The pty driver does not clear its write buffer when commanded.
This is to avoid an apparent deadlock between parallel flushes from
both pty ends; specifically when handling either BRK or INTR input.
However, parallel flushes from this source is not possible since
the pty master can never be set to BRKINT or ISIG. Parallel flushes
from other sources are possible but these do not threaten deadlocks.

Annotate the tty buffer mutex for lockdep to represent the nested
tty_buffer locking which occurs when the pty slave is processing input
(its buffer mutex held) and receives INTR or BRK and acquires the
linked tty buffer mutex via tty_buffer_flush().

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02 10:11:27 -08:00
Peter Hurley
c81622ac42 pty: Fix overlimit memory use
The pty_space() computation is broken; the space already consumed
in the tty buffer is not accounted for.

Use tty_buffer_set_limit(), which enforces the limit automatically.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02 10:11:25 -08:00
Peter Hurley
37480a0568 tty: Prevent untrappable signals from malicious program
Commit 26df6d1340 ("tty: Add EXTPROC support for LINEMODE")
allows a process which has opened a pty master to send _any_ signal
to the process group of the pty slave. Although potentially
exploitable by a malicious program running a setuid program on
a pty slave, it's unknown if this exploit currently exists.

Limit to signals actually used.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Howard Chu <hyc@symas.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: <stable@vger.kernel.org> # 2.6.36+
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02 10:09:54 -08:00
Peter Hurley
52bce7f8d4 pty, n_tty: Simplify input processing on final close
When releasing one end of a pty pair, that end may just have written
to the other, which the input processing worker, flush_to_ldisc(), is
still working on but has not completed the copy to the other end's
read buffer. So input may not appear to be available to a waiting
reader but yet TTY_OTHER_CLOSED is now observed. The n_tty line
discipline has worked around this by waiting for input processing
to complete and then re-checking if input is available before
exiting with -EIO.

Since the tty/ldisc lock reordering, the wait for input processing
to complete can now occur during final close before setting
TTY_OTHER_CLOSED. In this way, a waiting reader is guaranteed to
see input available (if any) before observing TTY_OTHER_CLOSED.

Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 18:50:42 -08:00
Peter Hurley
1bb954153a pty: Don't drop pty master tty lock to hangup slave
With the revised tty lock order and lockdep annotation, claiming
the pty slave lock is now safe while still holding the pty master lock.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 18:50:42 -08:00
Peter Hurley
2febdb632b tty: Preset lock subclass for nested tty locks
Eliminate the requirement of specifying the tty lock nesting at
lock time; instead, set the lock subclass for slave ptys at pty
install (normal ttys and master ptys use subclass 0).

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 18:50:42 -08:00
Peter Hurley
55199ea3bd pty: Always return -EIO if slave BSD pty opened first
Opening the slave BSD pty first already returns -EIO from the slave
pty_open(), which in turn causes the newly installed tty pair to be
released before returning from tty_open(). However, this can also
cause a parallel master BSD pty open to fail because the pty pair
destruction may already been taking place in tty_release().

Failing at driver->install() if the slave pty is opened first ensures
that a pty master open cannot fail, because the driver tables will
not have been updated so tty_driver_lookup_tty() won't find the
master pty (and attempt to "re-open" it).

In turn, this guarantees that any tty with a tty->count == 0 is
in final close (rather than never opened).

Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 18:24:10 -08:00
Peter Hurley
4ed60fc257 pty: Hold ctrl_lock for packet mode updates
Updates to the packet mode enable require holding the ctrl_lock;
the serialization prevents corruption of adjacent fields.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 16:34:36 -08:00
Peter Hurley
2622d73e51 pty: Fix packet mode setting race
Because pty_set_pktmode() does not claim the slave's ctrl_lock
to clear ->ctrl_status (to avoid unnecessary lock nesting),
pty_set_pktmode() may accidentally erase new ->ctrl_status updates.
For example,

CPU 0                             | CPU 1
pty_set_pktmode()                 | pty_start()
  spin_lock(master's ctrl_lock)   |
  tty->packet = 1                 |
                                  |   if (tty->link->packet)
                                  |     spin_lock(slave's ctrl_lock)
                                  |     tty->ctrl_status = TIOCPKT_START
  tty->link->ctrl_status = 0      |

Ensure the clear of ->ctrl_status occurs before packet mode is set
(and observable on another cpu).

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 16:34:36 -08:00
Peter Hurley
54e8e5fcaa pty: Don't claim slave's ctrl_lock for master's packet mode
The slave's ctrl_lock serializes updates to the ctrl_status field
only, whereas the master's ctrl_lock serializes updates to the
packet mode enable (ie., the master does not have ctrl_status and
the slave does not have packet mode). Thus, claiming the slave's
ctrl_lock to access ->packet is useless.

Unlocked reads of ->packet are already smp-safe.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 16:34:36 -08:00
Peter Hurley
6054c16e80 tty: Use spin_lock_irq() for ctrl_lock when interrupts enabled
Interrupts are enabled in the n_tty_read() loop, ioctl(TIOCPKT)
and pty driver flush_buffer() routine; no need to save and restore
local interrupt state.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 16:34:36 -08:00
Peter Hurley
4d8c1dff6a pty: Use spin_lock_irq() for pty_set_termios()
The tty driver's set_termios() method is called with interrupts
enabled; there is no need to save and restore the local interrupt state.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 16:34:36 -08:00
Peter Hurley
dbfcd851a9 tty: Move pty-specific set_termios() handling to pty driver
Packet mode is unique to the pty driver; move the packet mode state
change code from the generic tty ioctl handler to the pty driver.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 16:34:36 -08:00
Peter Hurley
6460fbbf47 tty: WARN for attempted set_termios() of pty master
The pty master's termios should never be set; currently, all code
paths which call the driver's set_termios() method ensure that the
pty slave's termios is being set.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 16:34:36 -08:00
Peter Hurley
5b23954220 tty: Replace open-coded tty_get_pgrp()
Replace open-coded instances of tty_get_pgrp().

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05 16:26:13 -08:00
Peter Hurley
01adc80706 tty: Move packet mode flow control notifications to pty driver
When a master pty is set to packet mode, flow control changes to
the slave pty cause notifications to the master pty via reads and
polls. However, these tests are occurring for all ttys, not
just ptys.

Implement flow control packet mode notifications in the pty driver.
Only the slave side implements the flow control handlers since
packet mode is asymmetric; the master pty receives notifications
for slave-side changes, but not vice versa.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 21:19:35 -07:00
Rasmus Villemoes
07584d4a35 drivers: tty: Fix use-after-free in pty_common_install
In 2c964a2f "drivers: tty: Merge alloc_tty_struct and
initialize_tty_struct", I messed up the refactorization of
pty_common_install, causing use-after-free and NULL pointer derefs on
various error paths. This should fix it.

Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-12 17:21:47 -07:00
Rasmus Villemoes
2c964a2f41 drivers: tty: Merge alloc_tty_struct and initialize_tty_struct
The two functions alloc_tty_struct and initialize_tty_struct are
always called together. Merge them into alloc_tty_struct, updating its
prototype and the only two callers of these functions.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11 17:54:28 -07:00
Peter Hurley
dee4a0be69 tty: Fix lock order in tty_do_resize()
Commits 6a1c0680cf and
9356b535fc, respectively
  'tty: Convert termios_mutex to termios_rwsem' and
  'n_tty: Access termios values safely'
introduced a circular lock dependency with console_lock and
termios_rwsem.

The lockdep report [1] shows that n_tty_write() will attempt
to claim console_lock while holding the termios_rwsem, whereas
tty_do_resize() may already hold the console_lock while
claiming the termios_rwsem.

Since n_tty_write() and tty_do_resize() do not contend
over the same data -- the tty->winsize structure -- correct
the lock dependency by introducing a new lock which
specifically serializes access to tty->winsize only.

[1] Lockdep report

======================================================
[ INFO: possible circular locking dependency detected ]
3.10.0-0+tip-xeon+lockdep #0+tip Not tainted
-------------------------------------------------------
modprobe/277 is trying to acquire lock:
 (&tty->termios_rwsem){++++..}, at: [<ffffffff81452656>] tty_do_resize+0x36/0xe0

but task is already holding lock:
 ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 ((fb_notifier_list).rwsem){.+.+.+}:
       [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0
       [<ffffffff8175b797>] down_read+0x47/0x5c
       [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0
       [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20
       [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20
       [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320
       [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper]
       [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau]
       [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau]
       [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm]
       [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau]
       [<ffffffff813b13db>] local_pci_probe+0x4b/0x80
       [<ffffffff813b1701>] pci_device_probe+0x111/0x120
       [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0
       [<ffffffff81497bab>] __driver_attach+0xab/0xb0
       [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0
       [<ffffffff814971fe>] driver_attach+0x1e/0x20
       [<ffffffff81496cc1>] bus_add_driver+0x111/0x290
       [<ffffffff814982b7>] driver_register+0x77/0x170
       [<ffffffff813b0454>] __pci_register_driver+0x64/0x70
       [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm]
       [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau]
       [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0
       [<ffffffff810c54cb>] load_module+0x123b/0x1bf0
       [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120
       [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b

-> #1 (console_lock){+.+.+.}:
       [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0
       [<ffffffff810430a7>] console_lock+0x77/0x80
       [<ffffffff8146b2a1>] con_flush_chars+0x31/0x50
       [<ffffffff8145780c>] n_tty_write+0x1ec/0x4d0
       [<ffffffff814541b9>] tty_write+0x159/0x2e0
       [<ffffffff814543f5>] redirected_tty_write+0xb5/0xc0
       [<ffffffff811ab9d5>] vfs_write+0xc5/0x1f0
       [<ffffffff811abec5>] SyS_write+0x55/0xa0
       [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b

-> #0 (&tty->termios_rwsem){++++..}:
       [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30
       [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0
       [<ffffffff8175b724>] down_write+0x44/0x70
       [<ffffffff81452656>] tty_do_resize+0x36/0xe0
       [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0
       [<ffffffff8146c99f>] vc_resize+0x1f/0x30
       [<ffffffff813e4535>] fbcon_init+0x385/0x5a0
       [<ffffffff8146a4bc>] visual_init+0xbc/0x120
       [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320
       [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70
       [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0
       [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820
       [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110
       [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0
       [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20
       [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20
       [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320
       [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper]
       [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau]
       [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau]
       [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm]
       [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau]
       [<ffffffff813b13db>] local_pci_probe+0x4b/0x80
       [<ffffffff813b1701>] pci_device_probe+0x111/0x120
       [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0
       [<ffffffff81497bab>] __driver_attach+0xab/0xb0
       [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0
       [<ffffffff814971fe>] driver_attach+0x1e/0x20
       [<ffffffff81496cc1>] bus_add_driver+0x111/0x290
       [<ffffffff814982b7>] driver_register+0x77/0x170
       [<ffffffff813b0454>] __pci_register_driver+0x64/0x70
       [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm]
       [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau]
       [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0
       [<ffffffff810c54cb>] load_module+0x123b/0x1bf0
       [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120
       [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b

other info that might help us debug this:

Chain exists of:
  &tty->termios_rwsem --> console_lock --> (fb_notifier_list).rwsem

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock((fb_notifier_list).rwsem);
                               lock(console_lock);
                               lock((fb_notifier_list).rwsem);
  lock(&tty->termios_rwsem);

 *** DEADLOCK ***

7 locks held by modprobe/277:
 #0:  (&__lockdep_no_validate__){......}, at: [<ffffffff81497b5b>] __driver_attach+0x5b/0xb0
 #1:  (&__lockdep_no_validate__){......}, at: [<ffffffff81497b69>] __driver_attach+0x69/0xb0
 #2:  (drm_global_mutex){+.+.+.}, at: [<ffffffffa008a6dd>] drm_get_pci_dev+0xbd/0x2a0 [drm]
 #3:  (registration_lock){+.+.+.}, at: [<ffffffff813d93f5>] register_framebuffer+0x25/0x320
 #4:  (&fb_info->lock){+.+.+.}, at: [<ffffffff813d8116>] lock_fb_info+0x26/0x60
 #5:  (console_lock){+.+.+.}, at: [<ffffffff813d95a4>] register_framebuffer+0x1d4/0x320
 #6:  ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0

stack backtrace:
CPU: 0 PID: 277 Comm: modprobe Not tainted 3.10.0-0+tip-xeon+lockdep #0+tip
Hardware name: Dell Inc. Precision WorkStation T5400  /0RW203, BIOS A11 04/30/2012
 ffffffff8213e5e0 ffff8802aa2fb298 ffffffff81755f19 ffff8802aa2fb2e8
 ffffffff8174f506 ffff8802aa2fa000 ffff8802aa2fb378 ffff8802aa2ea8e8
 ffff8802aa2ea910 ffff8802aa2ea8e8 0000000000000006 0000000000000007
Call Trace:
 [<ffffffff81755f19>] dump_stack+0x19/0x1b
 [<ffffffff8174f506>] print_circular_bug+0x1fb/0x20c
 [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30
 [<ffffffff810b775e>] ? mark_held_locks+0xae/0x120
 [<ffffffff810b78d5>] ? trace_hardirqs_on_caller+0x105/0x1d0
 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0
 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0
 [<ffffffff8175b724>] down_write+0x44/0x70
 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0
 [<ffffffff81452656>] tty_do_resize+0x36/0xe0
 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0
 [<ffffffff8146c99f>] vc_resize+0x1f/0x30
 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0
 [<ffffffff8146a4bc>] visual_init+0xbc/0x120
 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320
 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70
 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0
 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820
 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110
 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0
 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20
 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20
 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320
 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper]
 [<ffffffff8173cbcb>] ? kmemleak_alloc+0x5b/0xc0
 [<ffffffff81198874>] ? kmem_cache_alloc_trace+0x104/0x290
 [<ffffffffa01035e1>] ? drm_fb_helper_single_add_all_connectors+0x81/0xf0 [drm_kms_helper]
 [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau]
 [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau]
 [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm]
 [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau]
 [<ffffffff8175f162>] ? _raw_spin_unlock_irqrestore+0x42/0x80
 [<ffffffff813b13db>] local_pci_probe+0x4b/0x80
 [<ffffffff813b1701>] pci_device_probe+0x111/0x120
 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0
 [<ffffffff81497bab>] __driver_attach+0xab/0xb0
 [<ffffffff81497b00>] ? driver_probe_device+0x3a0/0x3a0
 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0
 [<ffffffff814971fe>] driver_attach+0x1e/0x20
 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290
 [<ffffffffa022a000>] ? 0xffffffffa0229fff
 [<ffffffff814982b7>] driver_register+0x77/0x170
 [<ffffffffa022a000>] ? 0xffffffffa0229fff
 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70
 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm]
 [<ffffffffa022a000>] ? 0xffffffffa0229fff
 [<ffffffffa022a000>] ? 0xffffffffa0229fff
 [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau]
 [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0
 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0
 [<ffffffff81399a50>] ? ddebug_proc_open+0xb0/0xb0
 [<ffffffff813855ae>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120
 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 15:12:53 -07:00
Peter Hurley
5ede52538e tty: Remove extra wakeup from pty write() path
Acquiring the write_wait queue spin lock now accounts for the largest
slice of cpu time on the tty write path. Two factors contribute to
this situation; a overly-pessimistic line discipline write loop which
_always_ sets up a wait loop even if i/o will immediately succeed, and
on ptys, a wakeup storm from reads and writes.

Writer wakeup does not need to be performed by the pty driver.
Firstly, since the actual i/o is performed within the write, the
line discipline write loop will continue while space remains in
the flip buffers. Secondly, when space becomes avail in the
line discipline receive buffer (and thus also in the flip buffers),
the pty unthrottle re-wakes the writer (non-flow-controlled line
disciplines unconditionally unthrottle the driver when data is
received). Thus, existing in-kernel i/o is guaranteed to advance.
Finally, writer wakeup occurs at the conclusion of the line discipline
write (in tty_write_unlock()). This guarantees that any user-space write
waiters are woken to continue additional i/o.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24 09:29:56 -07:00
Peter Hurley
7bfe0b7116 tty: Track flip buffer memory limit atomically
Lockless flip buffers require atomically updating the bytes-in-use
watermark.

The pty driver also peeks at the watermark value to limit
memory consumption to a much lower value than the default; query
the watermark with new fn, tty_buffer_space_avail().

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23 16:47:08 -07:00
Peter Hurley
6a1c0680cf tty: Convert termios_mutex to termios_rwsem
termios is commonly accessed unsafely (especially by N_TTY)
because the existing mutex forces exclusive access.
Convert existing usage.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23 16:43:01 -07:00
Peter Hurley
7c61c3d8f4 tty: Fix transient pty write() EIO
Commit 699390354d
('pty: Ignore slave pty close() if never successfully opened')
introduced a bug with ptys whereby a write() in parallel with an
open() on an existing pty could mistakenly indicate an I/O error.

Only indicate an I/O error if the condition on open() actually exists.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Cc: stable <stable@vger.kernel.org> # 3.9
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 12:37:29 -07:00
Linus Torvalds
b0b885657b tty: fix up atime/mtime mess, take three
We first tried to avoid updating atime/mtime entirely (commit
b0de59b573: "TTY: do not update atime/mtime on read/write"), and then
limited it to only update it occasionally (commit 37b7f3c765: "TTY:
fix atime/mtime regression"), but it turns out that this was both
insufficient and overkill.

It was insufficient because we let people attach to the shared ptmx node
to see activity without even reading atime/mtime, and it was overkill
because the "only once a minute" means that you can't really tell an
idle person from an active one with 'w'.

So this tries to fix the problem properly.  It marks the shared ptmx
node as un-notifiable, and it lowers the "only once a minute" to a few
seconds instead - still long enough that you can't time individual
keystrokes, but short enough that you can tell whether somebody is
active or not.

Reported-by: Simon Kirby <sim@hostway.ca>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01 07:32:21 -07:00
Jiri Slaby
f4b208eb91 TTY: pty, fix compilation warning
When CONFIG_UNIX98_PTYS is unset, we see this warning in pty:
  drivers/tty/pty.c:409:13: warning: ‘pty_unix98_shutdown’ defined but not used

Fix that by moving the function to a section which depends on that
config.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Toralf Foerster <toralf.foerster@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15 11:02:54 -07:00
Peter Hurley
19ffd68f81 pty: Remove redundant itty reset
port->itty has already been reset by release_tty() before
pty_cleanup() is called.

Call stack:
release_tty()
  tty_kref_put()
    queue_release_one_tty()
      release_one_tty() : workqueue
        tty->ops->cleanup()
          pty_cleanup()

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15 13:00:48 -07:00
Peter Hurley
80cace7256 pty: Ignore slave open count for master pty open
Multiple slave pty opens may be performed in parallel with the
master open. Of course, all the slave opens will fail because the
master pty is still locked but during this time the slave pty
count will be artificially greater than 1. This is should not
cause the master pty open to fail.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-04 15:40:29 -08:00
Peter Hurley
699390354d pty: Ignore slave pty close() if never successfully opened
If the master and slave ptys are opened in parallel, the slave open
fails because the pty is still locked. This is as designed.
However, pty_close() is still called for the slave pty which sets
TTY_OTHER_CLOSED in the master pty. This can cause the master open
to fail as well.

Use a common pattern in other tty drivers by setting TTY_IO_ERROR
until the open is successful and only closing the pty if not set.

Note: the master pty always closes regardless of whether the open
was successful, so that proper cleanup can occur.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-04 15:40:28 -08:00
Peter Hurley
7acf6cd80b pty: Fix BUG()s when ptmx_open() errors out
If pmtx_open() fails to get a slave inode or fails the pty_open(),
the tty is released as part of the error cleanup. As evidenced by the
first BUG stacktrace below, pty_close() assumes that the linked pty has
a valid, initialized inode* stored in driver_data.

Also, as evidenced by the second BUG stacktrace below, pty_unix98_shutdown()
assumes that the master pty's driver_data has been initialized.

1) Fix the invalid assumption in pty_close().
2) Initialize driver_data immediately so proper devpts fs cleanup occurs.

Fixes this BUG:

[  815.868844] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
[  815.869018] IP: [<ffffffff81207bcc>] devpts_pty_kill+0x1c/0xa0
[  815.869190] PGD 7c775067 PUD 79deb067 PMD 0
[  815.869315] Oops: 0000 [#1] PREEMPT SMP
[  815.869443] Modules linked in: kvm_intel kvm snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi microcode snd_rawmidi psmouse serio_raw snd_seq_midi_event snd_seq snd_timer$
[  815.870025] CPU 0
[  815.870143] Pid: 27819, comm: stress_test_tty Tainted: G        W    3.8.0-next-20130125+ttypatch-2-xeon #2 Bochs Bochs
[  815.870386] RIP: 0010:[<ffffffff81207bcc>]  [<ffffffff81207bcc>] devpts_pty_kill+0x1c/0xa0
[  815.870540] RSP: 0018:ffff88007d3e1ac8  EFLAGS: 00010282
[  815.870661] RAX: ffff880079c20800 RBX: 0000000000000000 RCX: 0000000000000000
[  815.870804] RDX: ffff880079c209a8 RSI: 0000000000000286 RDI: 0000000000000000
[  815.870933] RBP: ffff88007d3e1ae8 R08: 0000000000000000 R09: 0000000000000000
[  815.871078] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88007bfb7e00
[  815.871209] R13: 0000000000000005 R14: ffff880079c20c00 R15: ffff880079c20c00
[  815.871343] FS:  00007f2e86206700(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
[  815.871495] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  815.871617] CR2: 0000000000000028 CR3: 000000007ae56000 CR4: 00000000000006f0
[  815.871752] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  815.871902] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  815.872012] Process stress_test_tty (pid: 27819, threadinfo ffff88007d3e0000, task ffff88007c874530)
[  815.872012] Stack:
[  815.872012]  ffff88007bfb7e00 ffff880079c20c00 ffff88007bfb7e00 0000000000000005
[  815.872012]  ffff88007d3e1b08 ffffffff81417be7 ffff88007caa9bd8 ffff880079c20800
[  815.872012]  ffff88007d3e1bc8 ffffffff8140e5f8 0000000000000000 0000000000000000
[  815.872012] Call Trace:
[  815.872012]  [<ffffffff81417be7>] pty_close+0x157/0x170
[  815.872012]  [<ffffffff8140e5f8>] tty_release+0x138/0x580
[  815.872012]  [<ffffffff816d29f3>] ? _raw_spin_lock+0x23/0x30
[  815.872012]  [<ffffffff816d267a>] ? _raw_spin_unlock+0x1a/0x40
[  815.872012]  [<ffffffff816d0178>] ? __mutex_unlock_slowpath+0x48/0x60
[  815.872012]  [<ffffffff81417dff>] ptmx_open+0x11f/0x180
[  815.872012]  [<ffffffff8119394b>] chrdev_open+0x9b/0x1c0
[  815.872012]  [<ffffffff8118d643>] do_dentry_open+0x203/0x290
[  815.872012]  [<ffffffff811938b0>] ? cdev_put+0x30/0x30
[  815.872012]  [<ffffffff8118d705>] finish_open+0x35/0x50
[  815.872012]  [<ffffffff8119dcce>] do_last+0x6fe/0xe90
[  815.872012]  [<ffffffff8119a7af>] ? link_path_walk+0x7f/0x880
[  815.872012]  [<ffffffff810909d5>] ? cpuacct_charge+0x75/0x80
[  815.872012]  [<ffffffff8119e51c>] path_openat+0xbc/0x4e0
[  815.872012]  [<ffffffff816d0fd0>] ? __schedule+0x400/0x7f0
[  815.872012]  [<ffffffff8140e956>] ? tty_release+0x496/0x580
[  815.872012]  [<ffffffff8119ec11>] do_filp_open+0x41/0xa0
[  815.872012]  [<ffffffff816d267a>] ? _raw_spin_unlock+0x1a/0x40
[  815.872012]  [<ffffffff811abe39>] ? __alloc_fd+0xe9/0x140
[  815.872012]  [<ffffffff8118ea44>] do_sys_open+0xf4/0x1e0
[  815.872012]  [<ffffffff8118eb51>] sys_open+0x21/0x30
[  815.872012]  [<ffffffff816da499>] system_call_fastpath+0x16/0x1b
[  815.872012] Code: 0f 1f 80 00 00 00 00 45 31 e4 eb d7 0f 0b 90 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 48 89 5d e8 48 89 fb 4c 89 65 f0 4c 89 6d f8 <48> 8b 47 28 48 81 78 58 d1 1c 0$
[  815.872012] RIP  [<ffffffff81207bcc>] devpts_pty_kill+0x1c/0xa0
[  815.872012]  RSP <ffff88007d3e1ac8>
[  815.872012] CR2: 0000000000000028
[  815.897036] ---[ end trace eadf50b7f34e47d5 ]---

Fixes this BUG also:

[  608.366836] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
[  608.366948] IP: [<ffffffff812078d8>] devpts_kill_index+0x18/0x70
[  608.367050] PGD 7c75b067 PUD 7b919067 PMD 0
[  608.367135] Oops: 0000 [#1] PREEMPT SMP
[  608.367201] Modules linked in: kvm_intel kvm snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event microcode snd_seq psmouse snd_timer snd_seq_device serio_raw snd mac_hid soundcore snd_page_alloc rfcomm virtio_balloon parport_pc bnep bluetooth ppdev i2c_piix4 lp parport floppy
[  608.367617] CPU 2
[  608.367669] Pid: 1918, comm: stress_test_tty Tainted: G        W    3.8.0-next-20130125+ttypatch-2-xeon #2 Bochs Bochs
[  608.367796] RIP: 0010:[<ffffffff812078d8>]  [<ffffffff812078d8>] devpts_kill_index+0x18/0x70
[  608.367885] RSP: 0018:ffff88007ae41a88  EFLAGS: 00010286
[  608.367951] RAX: ffffffff81417e80 RBX: ffff880036472400 RCX: 0000000180400028
[  608.368010] RDX: ffff880036470004 RSI: 0000000000000004 RDI: 0000000000000000
[  608.368010] RBP: ffff88007ae41a98 R08: 0000000000000000 R09: 0000000000000001
[  608.368010] R10: ffffea0001f22e40 R11: ffffffff814151d5 R12: 0000000000000004
[  608.368010] R13: ffff880036470000 R14: 0000000000000004 R15: ffff880036472400
[  608.368010] FS:  00007ff7a5268700(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
[  608.368010] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  608.368010] CR2: 0000000000000028 CR3: 000000007a0fd000 CR4: 00000000000006e0
[  608.368010] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  608.368010] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  608.368010] Process stress_test_tty (pid: 1918, threadinfo ffff88007ae40000, task ffff88003688dc40)
[  608.368010] Stack:
[  608.368010]  ffff880036472400 0000000000000001 ffff88007ae41aa8 ffffffff81417e98
[  608.368010]  ffff88007ae41ac8 ffffffff8140c42b ffff88007ac73100 ffff88007ac73100
[  608.368010]  ffff88007ae41b98 ffffffff8140ead5 ffff88007ae41b38 ffff88007ca40e40
[  608.368010] Call Trace:
[  608.368010]  [<ffffffff81417e98>] pty_unix98_shutdown+0x18/0x20
[  608.368010]  [<ffffffff8140c42b>] release_tty+0x3b/0xe0
[  608.368010]  [<ffffffff8140ead5>] __tty_release+0x575/0x5d0
[  608.368010]  [<ffffffff816d2c63>] ? _raw_spin_lock+0x23/0x30
[  608.368010]  [<ffffffff816d28ea>] ? _raw_spin_unlock+0x1a/0x40
[  608.368010]  [<ffffffff816d03e8>] ? __mutex_unlock_slowpath+0x48/0x60
[  608.368010]  [<ffffffff8140ef79>] tty_open+0x449/0x5f0
[  608.368010]  [<ffffffff8119394b>] chrdev_open+0x9b/0x1c0
[  608.368010]  [<ffffffff8118d643>] do_dentry_open+0x203/0x290
[  608.368010]  [<ffffffff811938b0>] ? cdev_put+0x30/0x30
[  608.368010]  [<ffffffff8118d705>] finish_open+0x35/0x50
[  608.368010]  [<ffffffff8119dcce>] do_last+0x6fe/0xe90
[  608.368010]  [<ffffffff8119a7af>] ? link_path_walk+0x7f/0x880
[  608.368010]  [<ffffffff8119e51c>] path_openat+0xbc/0x4e0
[  608.368010]  [<ffffffff8119ec11>] do_filp_open+0x41/0xa0
[  608.368010]  [<ffffffff816d28ea>] ? _raw_spin_unlock+0x1a/0x40
[  608.368010]  [<ffffffff811abe39>] ? __alloc_fd+0xe9/0x140
[  608.368010]  [<ffffffff8118ea44>] do_sys_open+0xf4/0x1e0
[  608.368010]  [<ffffffff816d2c63>] ? _raw_spin_lock+0x23/0x30
[  608.368010]  [<ffffffff8118eb51>] sys_open+0x21/0x30
[  608.368010]  [<ffffffff816da719>] system_call_fastpath+0x16/0x1b
[  608.368010] Code: ec 48 83 c4 10 5b 41 5c 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 10 4c 89 65 f8 41 89 f4 48 89 5d f0 <48> 8b 47 28 48 81 78 58 d1 1c 00 00 74 0b 48 8b 05 4b 66 cf 00
[  608.368010] RIP  [<ffffffff812078d8>] devpts_kill_index+0x18/0x70
[  608.368010]  RSP <ffff88007ae41a88>
[  608.368010] CR2: 0000000000000028
[  608.394153] ---[ end trace afe83b0fb5fbda93 ]---

Reported-by: Ilya Zykov <ilya@ilyx.ru>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-04 15:40:28 -08:00
Greg Kroah-Hartman
9f9cba810f Merge 3.8-rc5 into tty-next
This resolves a number of tty driver merge issues found in linux-next

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25 13:27:36 -08:00