-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl3IqJQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGOiUH+gOEDwid5OODaFAd
CggXugdFIlBZefKqGVNW5sjgX8pxFWHXuEMC8iNb6QXtQZdFrI6LFf9hhUDmzQtm
6y1LPxxEiTZjObMEsBNylb7tyzgujFHcAlp0Zro3w/HLCqmYTSP3FF46i2u6KZfL
XhkpM4X7R7qxlfpdhlfESv/ElRGocZe6SwXfC7pcPo5flFcmkdu9ijqhNd/6CZ/h
Nf9rTsD/wEDVUelFbgVN+LJzlaB0tsyc4Zbof07n8OsFZjhdEOop8gfM/kTBLcyY
6bh66SfDScdsNnC/l8csbPjSZRx+i+nQs67DyhGNnsSAFgHBZdC4Tb/2mDCwhCLR
dUvuYZc=
=1N6F
-----END PGP SIGNATURE-----
Merge v5.4-rc7 into drm-next
We have the i915 security fixes to backmerge, but first
let's clear the decks for other drivers to avoid a bigger
mess.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull networking fixes from David Miller:
1) BPF sample build fixes from Björn Töpel
2) Fix powerpc bpf tail call implementation, from Eric Dumazet.
3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet.
4) Fix crash in ebtables when using dnat target, from Florian Westphal.
5) Fix port disable handling whne removing bcm_sf2 driver, from Florian
Fainelli.
6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski.
7) Various KCSAN fixes all over the networking, from Eric Dumazet.
8) Memory leaks in mlx5 driver, from Alex Vesker.
9) SMC interface refcounting fix, from Ursula Braun.
10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu.
11) Add a TX lock to synchonize the kTLS TX path properly with crypto
operations. From Jakub Kicinski.
12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano
Garzarella.
13) Infinite loop in Intel ice driver, from Colin Ian King.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
ixgbe: need_wakeup flag might not be set for Tx
i40e: need_wakeup flag might not be set for Tx
igb/igc: use ktime accessors for skb->tstamp
i40e: Fix for ethtool -m issue on X722 NIC
iavf: initialize ITRN registers with correct values
ice: fix potential infinite loop because loop counter being too small
qede: fix NULL pointer deref in __qede_remove()
net: fix data-race in neigh_event_send()
vsock/virtio: fix sock refcnt holding during the shutdown
net: ethernet: octeon_mgmt: Account for second possible VLAN header
mac80211: fix station inactive_time shortly after boot
net/fq_impl: Switch to kvmalloc() for memory allocation
mac80211: fix ieee80211_txq_setup_flows() failure path
ipv4: Fix table id reference in fib_sync_down_addr
ipv6: fixes rt6_probe() and fib6_nh->last_probe init
net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
net: usb: qmi_wwan: add support for DW5821e with eSIM support
CDC-NCM: handle incomplete transfer of MTU
nfc: netlink: fix double device reference drop
NFC: st21nfca: fix double free
...
-----BEGIN PGP SIGNATURE-----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=8B/z
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Two NVMe device removal crash fixes, and a compat fixup for for an
ioctl that was introduced in this release (Anton, Charles, Max - via
Keith)
- Missing error path mutex unlock for drbd (Dan)
- cgroup writeback fixup on dead memcg (Tejun)
- blkcg online stats print fix (Tejun)
* tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block:
cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
block: drbd: remove a stray unlock in __drbd_send_protocol()
blkcg: make blkcg_print_stat() print stats only for online blkgs
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
Changing nvme_passthru_cmd64 to add a field: rsvd2. This field is an explicit
marker for the padding space added on certain platforms as a result of the
enlargement of the result field from 32 bit to 64 bits in size, and
fixes differences in struct size when using compat ioctl for 32-bit
binaries on 64-bit architecture.
Fixes: 65e68edce0 ("nvme: allow 64-bit results in passthru commands")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Charles Machalow <csm10495@gmail.com>
[changelog]
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXcGMxwAKCRCRxhvAZXjc
otEzAP9lHvP97TtRG9gP6dj6YovZ5Djdo3IscmkTqy5Nt8sVNQD+NWg1LZnSMFdJ
ExETgRVlsjF8q2sblswtn/8Ab53O6AM=
=RVGl
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull clone3 stack argument update from Christian Brauner:
"This changes clone3() to do basic stack validation and to set up the
stack depending on whether or not it is growing up or down.
With clone3() the expectation is now very simply that the .stack
argument points to the lowest address of the stack and that
.stack_size specifies the initial stack size. This is diferent from
legacy clone() where the "stack" argument had to point to the lowest
or highest address of the stack depending on the architecture.
clone3() was released with 5.3. Currently, it is not documented and
very unclear to userspace how the stack and stack_size argument have
to be passed. After talking to glibc folks we concluded that changing
clone3() to determine stack direction and doing basic validation is
the right course of action.
Note, this is a potentially user visible change. In the very unlikely
case, that it breaks someone's use-case we will revert. (And then e.g.
place the new behavior under an appropriate flag.)
Note that passing an empty stack will continue working just as before.
Breaking someone's use-case is very unlikely. Neither glibc nor musl
currently expose a wrapper for clone3(). There is currently also no
real motivation for anyone to use clone3() directly. First, because
using clone{3}() with stacks requires some assembly (see glibc and
musl). Second, because it does not provide features that legacy
clone() doesn't. New features for clone3() will first happen in v5.5
which is why v5.4 is still a good time to try and make that change now
and backport it to v5.3.
I did a codesearch on https://codesearch.debian.net, github, and
gitlab and could not find any software currently relying directly on
clone3(). I expect this to change once we land CLONE_CLEAR_SIGHAND
which was a request coming from glibc at which point they'll likely
start using it"
* tag 'for-linus-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
clone3: validate stack arguments
Validate the stack arguments and setup the stack depening on whether or not
it is growing down or up.
Legacy clone() required userspace to know in which direction the stack is
growing and pass down the stack pointer appropriately. To make things more
confusing microblaze uses a variant of the clone() syscall selected by
CONFIG_CLONE_BACKWARDS3 that takes an additional stack_size argument.
IA64 has a separate clone2() syscall which also takes an additional
stack_size argument. Finally, parisc has a stack that is growing upwards.
Userspace therefore has a lot nasty code like the following:
#define __STACK_SIZE (8 * 1024 * 1024)
pid_t sys_clone(int (*fn)(void *), void *arg, int flags, int *pidfd)
{
pid_t ret;
void *stack;
stack = malloc(__STACK_SIZE);
if (!stack)
return -ENOMEM;
#ifdef __ia64__
ret = __clone2(fn, stack, __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
#elif defined(__parisc__) /* stack grows up */
ret = clone(fn, stack, flags | SIGCHLD, arg, pidfd);
#else
ret = clone(fn, stack + __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
#endif
return ret;
}
or even crazier variants such as [3].
With clone3() we have the ability to validate the stack. We can check that
when stack_size is passed, the stack pointer is valid and the other way
around. We can also check that the memory area userspace gave us is fine to
use via access_ok(). Furthermore, we probably should not require
userspace to know in which direction the stack is growing. It is easy
for us to do this in the kernel and I couldn't find the original
reasoning behind exposing this detail to userspace.
/* Intentional user visible API change */
clone3() was released with 5.3. Currently, it is not documented and very
unclear to userspace how the stack and stack_size argument have to be
passed. After talking to glibc folks we concluded that trying to change
clone3() to setup the stack instead of requiring userspace to do this is
the right course of action.
Note, that this is an explicit change in user visible behavior we introduce
with this patch. If it breaks someone's use-case we will revert! (And then
e.g. place the new behavior under an appropriate flag.)
Breaking someone's use-case is very unlikely though. First, neither glibc
nor musl currently expose a wrapper for clone3(). Second, there is no real
motivation for anyone to use clone3() directly since it does not provide
features that legacy clone doesn't. New features for clone3() will first
happen in v5.5 which is why v5.4 is still a good time to try and make that
change now and backport it to v5.3. Searches on [4] did not reveal any
packages calling clone3().
[1]: https://lore.kernel.org/r/CAG48ez3q=BeNcuVTKBN79kJui4vC6nw0Bfq6xc-i0neheT17TA@mail.gmail.com
[2]: https://lore.kernel.org/r/20191028172143.4vnnjpdljfnexaq5@wittgenstein
[3]: 5238e95759/src/basic/raw-clone.h (L31)
[4]: https://codesearch.debian.net
Fixes: 7f192e3cd3 ("fork: add clone3")
Cc: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-api@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # 5.3
Cc: GNU C Library <libc-alpha@sourceware.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20191031113608.20713-1-christian.brauner@ubuntu.com
The "GPL-2.0" license identifier changed to "GPL-2.0-only" in SPDX v3.0.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
UAPI Changes:
- Make context persistence optional
Allow userspace to tie the context lifetime to FD lifetime,
effectively allowing Ctrl-C killing of a process to also clean
up the hardware immediately.
Compute changes: https://github.com/intel/compute-runtime/pull/228
The compute driver is shipping in Ubuntu. uAPI acked by Mesa folks.
- Put future HW and their uAPIs under STAGING & BROKEN
Introduces DRM_I915_UNSTABLE Kconfig menu for working on the new
uAPI for future HW in upstream. We already disable driver loading
by default the platform is deemed ready. This is a second level
of protection based on compile time switch (STAGING & BROKEN).
- Under DRM_I915_UNSTABLE: Add the fake lmem region on iGFX
Fake local memory region on integrated GPU through cmdline:
memmap=2G$16G i915.fake_lmem_start=0x400000000
Currently allows testing non-mappable GGTT behavior and running
kernel selftest for local memory.
Driver Changes:
- Fix Bugzilla #112084: VGA external monitor not working (Ville)
- Add support for half float framebuffers (Ville)
- Add perf support on TGL (Lionel)
- Replace hangcheck by heartbeats (Chris)
- Allow SPT PCH on all AML devices (James)
- Add new CNL PCH for CML platform (Imre)
- Allow 100 ms (Kconfig) for workloads to exit before reset (Chris, Jon, Joonas)
- Forcibly pre-empt a context after 100 ms (Kconfig) of delay (Chris)
- Make timeslice duration Kconfig configurable (Chris)
- Whitelist PS_(DEPTH|INVOCATION)_COUNT for Tigerlake (Tapani)
- Support creating LMEM objects in kernel (Matt A)
- Adjust the location of RING_MI_MODE in the context image for TGL (Chris)
- Handle AUX interrupts for TC ports (Matt R)
- Add support for devices without mappable GGTT aperture (Daniele)
- Rename "inject_load_failure" module parameter to "inject_probe_failure" (Janusz)
- Handle fused off HDCP, FBC, DMC and DSC (Jose)
- Add support to one DP-MST stream on Tigerlake (Lucas)
- Add HuC firmware (and GuC) for TGL (Daniele)
- Allow ICL+ DSI on any pipe (Ville)
- Check some transcoder timing minimum limits (Ville)
- Don't set queue_priority_hint if we don't kick the submission (Chris)
- Introduce barrier pulses along engines to flush idle/in-flight requests (Chris)
- Drop assertion that ce->pin_mutex guards state updates (Chris)
- Cancel banned contexts on schedule-out (Chris)
- Cancel contexts when hangchecking is disabled (Chris)
- Catch GTT fault errors for gen11+ planes (Matt R)
- Print in debugfs if PSR is not enabled because of sink (Jose)
- Do not set MOCS control values on dgfx (Lucas)
- Setup io-mapping for LMEM (Abdiel)
- Support kernel mapping of LMEM objects (Abdiel)
- Add LMEM selftests (Matt A)
- Initialise PMU spinlock before registering (Chris)
- Clear DKL_TX_PMD_LANE_SUS before program TC voltage swing (Jose)
- Flip interpretation of ips fmin/fmax to max rps (Chris)
- Add VBT compression parameter block definition (Jani)
- Limit the blitter sizes to ensure low preemption latency (Chris)
- Fixup block_size rounding on BLT (Matt A)
- Don't try to place HWS in non-existing mappable region (Michal Wa)
- Don't allocate the ring in stolen if we lack aperture (Matt A)
- Add AUX B & C to DC_OFF_POWER_DOMAINS for Tigerlake (Matt R)
- Avoid HPD poll detect triggering a new detect cycle (Imre)
- Document the userspace fail with possible_crtcs (Ville)
- Drop lrc header page now unused by GuC (Daniele)
- Do not switch aux to TBT mode for non-TC ports (Jose)
- Restructure code to avoid depending on i915 but smaller structs (Chris, Tvrtko, Andi)
- Remove pm park/unpark notifications (Chris)
- Avoid lockdep cross-contamination between object types (Chris)
- Restructure DSC code (Jani)
- Fix dead locking in early workload shadow (Zhenyu)
- Split the legacy submission backend from the common CS ring buffer (Chris)
- Move intel_engine_context_in/out into intel_lrc.c (Tvrtko)
- Describe perf/wakeref structure members in documentation (Anna)
- Update renamed header files names in documentation (Anna)
- Add debugs to distingiush a cd2x update from a full cdclk pll update (Ville)
- Rework atomic global state locking (Ville)
- Allow planes to declare their minimum acceptable cdclk (Ville)
- Eliminate skl_check_pipe_max_pixel_rate() and simplify skl_max_scale() (Ville)
- Making loglevel of PSR2/SU logs same (Ap)
- Capture aux page table error register (Lionel)
- Add is_dgfx to device info (Jose)
- Split gen11_irq_handler to make it shareable (Lucas)
- Encapsulate kconfig constant values inside boolean predicates (Chris)
- Split memory_region initialisation into its own file (Chris)
- Use _PICK() for CHICKEN_TRANS() and add CHICKEN_TRANS_D (Ville)
- Add perf helper macros for comparing with whitelisted registers (Umesh)
- Fix i915_inject_load_error() name to read *_probe_* (Janusz)
- Drop unused AUX register offsets (Matt R)
- Provide more information on DP AUX failures (Matt R)
- Add GAM/SFC instdone to error state (Mika)
- Always track callers to intel_rps_mark_interactive() (Chris)
- Nuke 'mode' argument to intel_get_load_detect_pipe() (Ville)
- Simplify LVDS crtc_mask and pipe_mask setup (Ville)
- Stop frobbing crtc->base.mode (Ville)
- Do s/crtc_mask/pipe_mask/ (Ville)
- Split detaching and removing the vma (Chris)
- Selftest improvements (Chris, Tvrtko, Mika, Matt A, Lionel)
- GuC code improvements (Rob, Andi, Daniele)
- Check against i915_selftest only under CONFIG_SELFTEST (Chris)
- Refine occupancy test in kill_context() (Chris)
- Start kthreads before stopping (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101104718.GA14323@jlahtine-desk.ger.corp.intel.com
UAPI Changes:
-dma-buf: Introduce and revert dma-buf heap (Andrew/John/Sean)
Cross-subsystem Changes:
- None
Core Changes:
-dma-buf: add dynamic mapping to allow exporters to choose dma_resv lock
state on mmap/munmap (Christian)
-vram: add prepare/cleanup fb helpers to vram helpers (Thomas)
-ttm: always keep bo's on the lru + ttm cleanups (Christian)
-sched: allow a free_job routine to sleep (Steven)
-fb_helper: remove unused drm_fb_helper_defio_init() (Thomas)
Driver Changes:
-bochs/hibmc/vboxvideo: Use new vram helpers for prepare/cleanup fb (Thomas)
-amdgpu: Implement dma-buf import/export without drm helpers (Christian)
-panfrost: Simplify devfreq integration in driver (Steven)
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Steven Price <steven.price@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAl27NYYACgkQcywAJXLc
r3k7SQgAy7MbT7MHg1NkObnWFKwbNxA0FuRV7HVuQ5AiVA5fbehGECNVI1hFZE3D
kCyL5zRgzfrbBjI9zqclonXPmjPbD//f+ufUZJ2EaWHfE5k7LUYIEunpgWlCEgUR
qqeuqjvx2+NY3gLZW6D8BIrUW79cKbggBvDa9QeE4aoMiI7/F3lpNog5LNo7TWCQ
4SGgpDqtcJ2eSBneX80zLLVnI1CKfCSiWheZVoqCTRN5bfUftGwhbXb3N/JipG37
cCblVR7D8FR7z0MQUtq2ql76tCn5SJJqloujkmUU06quYBHR5K1deB5BP+8HI1Fw
/XMqWHFo0uX7h4hFIt1MVIJ92U+b+w==
=ViNo
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-10-31' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.5:
UAPI Changes:
-dma-buf: Introduce and revert dma-buf heap (Andrew/John/Sean)
Cross-subsystem Changes:
- None
Core Changes:
-dma-buf: add dynamic mapping to allow exporters to choose dma_resv lock
state on mmap/munmap (Christian)
-vram: add prepare/cleanup fb helpers to vram helpers (Thomas)
-ttm: always keep bo's on the lru + ttm cleanups (Christian)
-sched: allow a free_job routine to sleep (Steven)
-fb_helper: remove unused drm_fb_helper_defio_init() (Thomas)
Driver Changes:
-bochs/hibmc/vboxvideo: Use new vram helpers for prepare/cleanup fb (Thomas)
-amdgpu: Implement dma-buf import/export without drm helpers (Christian)
-panfrost: Simplify devfreq integration in driver (Steven)
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Steven Price <steven.price@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031193015.GA243509@art_vandelay
This reverts commit a69b0e855d.
This patchset doesn't meet the UAPI requirements set out in [1] for the DRM
subsystem. Once the userspace component is reviewed and ready for merge
we can try again.
[1]- https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-uapi.html#open-source-userspace-requirements
Fixes: a69b0e855d ("dma-buf: Add dma-buf heaps framework")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030203003.101156-6-sean@poorly.run
Our existing behaviour is to allow contexts and their GPU requests to
persist past the point of closure until the requests are complete. This
allows clients to operate in a 'fire-and-forget' manner where they can
setup a rendering pipeline and hand it over to the display server and
immediately exit. As the rendering pipeline is kept alive until
completion, the display server (or other consumer) can use the results
in the future and present them to the user.
The compute model is a little different. They have little to no buffer
sharing between processes as their kernels tend to operate on a
continuous stream, feeding the results back to the client application.
These kernels operate for an indeterminate length of time, with many
clients wishing that the kernel was always running for as long as they
keep feeding in the data, i.e. acting like a DSP.
Not all clients want this persistent "desktop" behaviour and would prefer
that the contexts are cleaned up immediately upon closure. This ensures
that when clients are run without hangchecking (e.g. for compute kernels
of indeterminate runtime), any GPU hang or other unexpected workloads
are terminated with the process and does not continue to hog resources.
The default behaviour for new contexts is the legacy persistence mode,
as some desktop applications are dependent upon the existing behaviour.
New clients will have to opt in to immediate cleanup on context
closure. If the hangchecking modparam is disabled, so is persistent
context support -- all contexts will be terminated on closure.
We expect this behaviour change to be welcomed by compute users, who
have often been caught between a rock and a hard place. They disable
hangchecking to avoid their kernels being "unfairly" declared hung, but
have also experienced true hangs that the system was then unable to
clean up. Naturally, this leads to bug reports.
Testcase: igt/gem_ctx_persistence
Link: https://github.com/intel/compute-runtime/pull/228
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029202338.8841-1-chris@chris-wilson.co.uk
UAPI Changes:
-syncobj: allow querying the last submitted timeline value (David)
-fourcc: explicitly defineDRM_FORMAT_BIG_ENDIAN as unsigned (Adam)
-omap: revert the OMAP_BO_* flags that were added -- no userspace (Sean)
Cross-subsystem Changes:
-MAINTAINERS: add Mihail as komeda co-maintainer (Mihail)
Core Changes:
-edid: a few cleanups, add AVI infoframe bar info (Ville)
-todo: remove i915 device_link item and add difficulty levels (Daniel)
-dp_helpers: add a few new helpers to parse dpcd (Thierry)
Driver Changes:
-gma500: fix a few memory disclosure leaks (Kangjie)
-qxl: convert to use the new drm_gem_object_funcs.mmap (Gerd)
-various: open code dp_link helpers in preparation for helper removal (Thierry)
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thierry Reding <treding@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAl2xxiYACgkQcywAJXLc
r3mJowf/U9ANPuvF+lahI6IVKpE4KD8Pz+73uNhjmxq5TnmcA7eNJ2pb8HO38tU2
lkchhaQEGZR96nVL962DkegEDu8p08RpYYwKv8r+sDV+zw/aviN/ANLSmTVtZ//m
wzgUI7zIqF1WxKdFEzNmQVuY0hYd4fWBn6kGvw1jS/6xL2/3KR6hKVigBZwkICSt
/ZiCZyxA7HhAlqzasn+PqGkuLVYv6NvFu4Ug6YG4nBOh57IrKmGt1a6cEUjGsHFf
6Ets5wTPu2ydMRvY+v6rUDDRj6JJQph7Lv4hVKtg13FerJ1+OQ7xjhu4gIk1oNl/
7zIgRWMVZj79ksMXyk6zgFD2rZAF3w==
=Fm3U
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-10-24-2' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.5:
UAPI Changes:
-syncobj: allow querying the last submitted timeline value (David)
-fourcc: explicitly defineDRM_FORMAT_BIG_ENDIAN as unsigned (Adam)
-omap: revert the OMAP_BO_* flags that were added -- no userspace (Sean)
Cross-subsystem Changes:
-MAINTAINERS: add Mihail as komeda co-maintainer (Mihail)
Core Changes:
-edid: a few cleanups, add AVI infoframe bar info (Ville)
-todo: remove i915 device_link item and add difficulty levels (Daniel)
-dp_helpers: add a few new helpers to parse dpcd (Thierry)
Driver Changes:
-gma500: fix a few memory disclosure leaks (Kangjie)
-qxl: convert to use the new drm_gem_object_funcs.mmap (Gerd)
-various: open code dp_link helpers in preparation for helper removal (Thierry)
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024155535.GA10294@art_vandelay
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXbgx9wAKCRDh3BK/laaZ
PIjMAQCTrWPf6pLHSoq+Pll7b8swu1m2mW97fj5k8coED1/DSQEA4222PkIdMmhu
qyHnoX0fTtYXg6NnHbDVWsNL4uG8YAM=
=RE9K
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Mostly virtiofs fixes, but also fixes a regression and couple of
longstanding data/metadata writeback ordering issues"
* tag 'fuse-fixes-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: redundant get_fuse_inode() calls in fuse_writepages_fill()
fuse: Add changelog entries for protocols 7.1 - 7.8
fuse: truncate pending writes on O_TRUNC
fuse: flush dirty data/metadata before non-truncate setattr
virtiofs: Remove set but not used variable 'fc'
virtiofs: Retry request submission from worker context
virtiofs: Count pending forgets as in_flight forgets
virtiofs: Set FR_SENT flag only after request has been sent
virtiofs: No need to check fpq->connected state
virtiofs: Do not end request in submission context
fuse: don't advise readdirplus for negative lookup
fuse: don't dereference req->args on finished request
virtio-fs: don't show mount options
virtio-fs: Change module name to virtiofs.ko
drm-next-5.5-2019-10-09:
amdgpu:
- Additional RAS enablement for vega20
- RAS page retirement and bad page storage in EEPROM
- No GPU reset with unrecoverable RAS errors
- Reserve vram for page tables rather than trying to evict
- Fix issues with GPU reset and xgmi hives
- DC i2c over aux fixes
- Direct submission for clears, PTE/PDE updates
- Improvements to help support recoverable GPU page faults
- Silence harmless SAD block messages
- Clean up code for creating a bo at a fixed location
- Initial DC HDCP support
- Lots of documentation fixes
- GPU reset for renoir
- Add IH clockgating support for soc15 asics
- Powerplay improvements
- DC MST cleanups
- Add support for MSI-X
- Misc cleanups and bug fixes
amdkfd:
- Query KFD device info by asic type rather than pci ids
- Add navi14 support
- Add renoir support
- Add navi12 support
- gfx10 trap handler improvements
- pasid cleanups
- Check against device cgroup
ttm:
- Return -EBUSY with pipelining with no_gpu_wait
radeon:
- Silence harmless SAD block messages
device_cgroup:
- Export devcgroup_check_permission
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010041713.3412-1-alexander.deucher@amd.com
This framework allows a unified userspace interface for dma-buf
exporters, allowing userland to allocate specific types of memory
for use in dma-buf sharing.
Each heap is given its own device node, which a user can allocate
a dma-buf fd from using the DMA_HEAP_IOC_ALLOC.
This code is an evoluiton of the Android ION implementation,
and a big thanks is due to its authors/maintainers over time
for their effort:
Rebecca Schultz Zavin, Colin Cross, Benjamin Gaignard,
Laura Abbott, and many other contributors!
Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Tested-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021190310.85221-2-john.stultz@linaro.org
Parroting Daniel's backmerge justification from
2e79e22e09:
Thierry needs fd70c7755b ("drm/bridge: tc358767: fix max_tu_symbol
value") to be able to merge his dp_link patch series.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl2su/AeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvm4H/1jkheCrvB/GJS69
wd18vizAg+eFmNCzxlGVhpQTKGymNRy+g6clnoli3cNJ3pSVKcYgVyB3oXaONIhp
g/ANudnBjTdjqYgJzfLij5AGecrGwDpF3YL0kuKrCB63s2I/HwQGYy/aPrYY8emy
gAYdaf1DGRu5/DIIB6soTo/TnpKoAyTE+XY5MaPSug++t/Flov19tlU40IZxXW94
bjTXbm0yklrsIx+LL5mYYGGnygSTCF66JjFg1qhDCBQaS2MZ21h1ZgaOtGZTwZcc
WgEiqLC5S1Iyj96zir1t78RcVQ4RzgvDbhUOgIqUFsYAO2wOicvxyFE3Hj8rPOKd
uGgVPRM=
=xgZa
-----END PGP SIGNATURE-----
Merge v5.4-rc4 into drm-next
Thierry needs fd70c7755b ("drm/bridge: tc358767: fix max_tu_symbol
value") to be able to merge his dp_link patch series.
Some adjacent changes conflicts, plus some clashes in i915 due to
cherry-picking and git trying to be helpful and leaving both versions
in.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
user space needs a flexiable query ability.
So that umd can get last signaled or submitted point.
v2:
add sanitizer checking.
v3:
rebase
Change-Id: I6512b430524ebabe715e602a2bf5abb0a7e780ea
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Christian König <Christian.Koenig@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/series/64044/
We would like to make use of perf in Vulkan. The Vulkan API is much
lower level than OpenGL, with applications directly exposed to the
concept of command buffers (pretty much equivalent to our batch
buffers). In Vulkan, queries are always limited in scope to a command
buffer. In OpenGL, the lack of command buffer concept meant that
queries' duration could span multiple command buffers.
With that restriction gone in Vulkan, we would like to simplify
measuring performance just by measuring the deltas between the counter
snapshots written by 2 MI_RECORD_PERF_COUNT commands, rather than the
more complex scheme we currently have in the GL driver, using 2
MI_RECORD_PERF_COUNT commands and doing some post processing on the
stream of OA reports, coming from the global OA buffer, to remove any
unrelated deltas in between the 2 MI_RECORD_PERF_COUNT.
Disabling preemption only apply to a single context with which want to
query performance counters for and is considered a privileged
operation, by default protected by CAP_SYS_ADMIN. It is possible to
enable it for a normal user by disabling the paranoid stream setting.
v2: Store preemption setting in intel_context (Chris)
v3: Use priorities to avoid preemption rather than the HW mechanism
v4: Just modify the port priority reporting function
v5: Add nopreempt flag on gem context and always flag requests
appropriately, regarless of OA reconfiguration.
Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-4-chris@chris-wilson.co.uk
Introduce a new perf_ioctl command to change the OA configuration of the
active stream. This allows the OA stream to be reconfigured between
batch buffers, giving greater flexibility in sampling. We inject a
request into the OA context to reconfigure the stream asynchronously on
the GPU in between and ordered with execbuffer calls.
Original patch for dynamic reconfiguration by Lionel Landwerlin.
Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-3-chris@chris-wilson.co.uk
Listing configurations at the moment is supported only through sysfs.
This might cause issues for applications wanting to list
configurations from a container where sysfs isn't available.
This change adds a way to query the number of configurations and their
content through the i915 query uAPI.
v2: Fix sparse warnings (Lionel)
Add support to query configuration using uuid (Lionel)
v3: Fix some inconsistency in uapi header (Lionel)
Fix unlocking when not locked issue (Lionel)
Add debug messages (Lionel)
v4: Fix missing unlock (Dan)
v5: Drop lock when copying config content to userspace (Chris)
v6: Drop lock when copying config list to userspace (Chris)
Fix deadlock when calling i915_perf_get_oa_config() under
perf.metrics_lock (Lionel)
Add i915_oa_config_get() (Chris)
Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-2-chris@chris-wilson.co.uk
Reporting this version will help application figure out what level of
the support the running kernel provides.
v2: Add i915_perf_ioctl_version() (Chris)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-1-chris@chris-wilson.co.uk
Here are some small tty and serial driver fixes for 5.4-rc3 that resolve
a number of reported issues and regressions.
None of these are huge, full details are in the shortlog. THere's also
a MAINTAINERS update that I think you might have already taken in your
tree already, but git should handle that merge easily.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXaH51A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykeBQCeMWoqZHpHTXiadziVgtHrjnj5lL8An2Y+3/Wh
ZbNxvHnUK/VUJQJ2Szsm
=e84r
-----END PGP SIGNATURE-----
Merge tag 'tty-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 5.4-rc3 that
resolve a number of reported issues and regressions.
None of these are huge, full details are in the shortlog. There's also
a MAINTAINERS update that I think you might have already taken in your
tree already, but git should handle that merge easily.
All have been in linux-next with no reported issues"
* tag 'tty-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb
tty: serial: imx: Use platform_get_irq_optional() for optional IRQs
serial: fix kernel-doc warning in comments
serial: 8250_omap: Fix gpio check for auto RTS/CTS
serial: mctrl_gpio: Check for NULL pointer
tty: serial: fsl_lpuart: Fix lpuart_flush_buffer()
tty: serial: Fix PORT_LINFLEXUART definition
tty: n_hdlc: fix build on SPARC
serial: uartps: Fix uartps_major handling
serial: uartlite: fix exit path null pointer
tty: serial: linflexuart: Fix magic SysRq handling
serial: sh-sci: Use platform_get_irq_optional() for optional interrupts
dt-bindings: serial: sh-sci: Document r8a774b1 bindings
serial/sifive: select SERIAL_EARLYCON
tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()'
tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'
On SoCs with DMM/TILER, we have two ways to allocate buffers: normal
dma_alloc or via DMM (which basically functions as an IOMMU). DMM can
map 128MB at a time, and we only map the DMM buffers when they are used
(i.e. not at alloc time). If DMM is present, omapdrm always uses DMM.
There are use cases that require lots of big buffers that are being used
at the same time by different IPs. At the moment the userspace has a
hard maximum of 128MB.
This patch adds three new flags that can be used by the userspace to
solve the situation:
OMAP_BO_MEM_CONTIG: The driver will use dma_alloc to get the memory.
This can be used to avoid DMM if the userspace knows it needs more than
128M of memory at the same time.
OMAP_BO_MEM_DMM: The driver will use DMM to get the memory. There's not
much use for this flag at the moment, as on platforms with DMM it is
used by default, but it's here for completeness.
OMAP_BO_MEM_PIN: The driver will pin the memory at alloc time, and keep
it pinned. This can be used to 1) get an error at alloc time if DMM
space is full, and 2) get rid of the constant pin/unpin operations which
may have some effect on performance.
If none of the flags are given, the behavior is the same as currently.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010120000.1421-9-jjhiblot@ti.com
OMAP_BO_TILED does not make sense, as OMAP_BO_TILED_* values are not
bitmasks but normal values. As we already have OMAP_BO_TILED_MASK for
the mask, we can remove OMAP_BO_TILED and use OMAP_BO_TILED_MASK
instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010120000.1421-6-jjhiblot@ti.com
UAPI Changes:
-Colorspace: Expose different prop values for DP vs. HDMI (Gwan-gyeong Mun)
-fourcc: Add DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED (Raymond)
-not_actually: s/ENOTSUPP/EOPNOTSUPP/ in drm_edid and drm_mipi_dbi. This should
not reach userspace, but adding here to specifically call that out (Daniel)
-i810: Prevent underflow in dispatch ioctls (Dan)
-komeda: Add ACLK sysfs attribute (Mihail)
-v3d: Allow userspace to clean up after render jobs (Iago)
Cross-subsystem Changes:
-MAINTAINERS:
-Add Alyssa & Steven as panfrost reviewers (Rob)
-Add Jernej as DE2 reviewer (Maxime)
-Add Chen-Yu as Allwinner maintainer (Maxime)
-staging: Make some stack arrays static const (Colin)
Core Changes:
-ttm: Allow drivers to specify their vma manager (to use gem mgr) (Gerd)
-docs: Various fixes in connector/encoder/bridge docs (Daniel, Lyude, Laurent)
-connector: Allow more than 3 possible encoders for a connector (José)
-dp_cec: Allow a connector to be associated with a cec device (Dariusz)
-various: Fix some compile/sparse warnings (Ville)
-mm: Ensure mm node removals are properly serialised (Chris)
-panel: Specify the type of panel for drm_panels for later use (Laurent)
-panel: Use drm_panel_init to init device and funcs (Laurent)
-mst: Refactors and cleanups in anticipation of suspend/resume support (Lyude)
-vram:
-Add lazy unmapping for gem bo's (Thomas)
-Unify and rationalize vram mm and gem vram (Thomas)
-Expose vmap and vunmap for gem vram objects (Thomas)
-Allow objects to be pinned at the top of vram to avoid fragmentation (Thomas)
Driver Changes:
-various: Include drm_bridge.h instead of relying on drm_crtc.h (Boris)
-ast/mgag200: Refactor show_cursor(), move cursor to top of video mem (Thomas)
-komeda:
-Add error event printing (behind CONFIG) and reg dump support (Lowry)
-Add suspend/resume support (Lowry)
-Workaround D71 shadow registers not flushing on disable (Lowry)
-meson: Add suspend/resume support (Neil)
-omap: Miscellaneous refactors and improvements (Tomi/Jyri)
-panfrost/shmem: Silence lockdep by using mutex_trylock (Rob)
-panfrost: Miscellaneous small fixes (Rob/Steven)
-sti: Fix warnings (Benjamin/Linus)
-sun4i:
-Add vcc-dsi regulator to sun6i_mipi_dsi (Jagan)
-A few patches to figure out the DRQ/start delay calc on dsi (Jagan/Icenowy)
-virtio:
-Add module param to switch resource reuse workaround on/off (Gerd)
-Avoid calling vmexit while holding spinlock (Gerd)
-Use gem shmem helpers instead of ttm (Gerd)
-Accommodate command buffer allocations too big for cma (David)
Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Raymond Smith <raymond.smith@arm.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Cc: Lowry Li <Lowry.Li@arm.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Iago Toral Quiroga <itoral@igalia.com>
Cc: David Riley <davidriley@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAl2d9h8ACgkQcywAJXLc
r3ms5gf9HIFpqwJ16CqaRukSnpcBcDoYUM8DGrOic+vw2bw14BQwFqvEOqrCkKL4
V6h/OCJlNFPtOcc1LvU/jeXxYf4AQWh/2qZeg+oee7HAGX5x8Y3f08GsEjO8+55t
QvSVxCKVti04M1ErPRfKrM7KPVE+IC+KdY26nO8Bf5zDGeCAkiPIDrdh2aZGMRdC
Eer0DJ96cgWW9LrhseCdj5nKwcR78DlbWa79zuPAss4LaBBbXqThNXYYzg/mZMKB
+VYgzs48tGYKK1NXXJ6biVI3brHrM52bqv5JpIncD5HepF1oIartWOMnbAO7MAqh
h/tgJWxL+4bnl9aqY87by1BtyVgl3w==
=kaOE
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-10-09-2' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.5:
UAPI Changes:
-Colorspace: Expose different prop values for DP vs. HDMI (Gwan-gyeong Mun)
-fourcc: Add DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED (Raymond)
-not_actually: s/ENOTSUPP/EOPNOTSUPP/ in drm_edid and drm_mipi_dbi. This should
not reach userspace, but adding here to specifically call that out (Daniel)
-i810: Prevent underflow in dispatch ioctls (Dan)
-komeda: Add ACLK sysfs attribute (Mihail)
-v3d: Allow userspace to clean up after render jobs (Iago)
Cross-subsystem Changes:
-MAINTAINERS:
-Add Alyssa & Steven as panfrost reviewers (Rob)
-Add Jernej as DE2 reviewer (Maxime)
-Add Chen-Yu as Allwinner maintainer (Maxime)
-staging: Make some stack arrays static const (Colin)
Core Changes:
-ttm: Allow drivers to specify their vma manager (to use gem mgr) (Gerd)
-docs: Various fixes in connector/encoder/bridge docs (Daniel, Lyude, Laurent)
-connector: Allow more than 3 possible encoders for a connector (José)
-dp_cec: Allow a connector to be associated with a cec device (Dariusz)
-various: Fix some compile/sparse warnings (Ville)
-mm: Ensure mm node removals are properly serialised (Chris)
-panel: Specify the type of panel for drm_panels for later use (Laurent)
-panel: Use drm_panel_init to init device and funcs (Laurent)
-mst: Refactors and cleanups in anticipation of suspend/resume support (Lyude)
-vram:
-Add lazy unmapping for gem bo's (Thomas)
-Unify and rationalize vram mm and gem vram (Thomas)
-Expose vmap and vunmap for gem vram objects (Thomas)
-Allow objects to be pinned at the top of vram to avoid fragmentation (Thomas)
Driver Changes:
-various: Include drm_bridge.h instead of relying on drm_crtc.h (Boris)
-ast/mgag200: Refactor show_cursor(), move cursor to top of video mem (Thomas)
-komeda:
-Add error event printing (behind CONFIG) and reg dump support (Lowry)
-Add suspend/resume support (Lowry)
-Workaround D71 shadow registers not flushing on disable (Lowry)
-meson: Add suspend/resume support (Neil)
-omap: Miscellaneous refactors and improvements (Tomi/Jyri)
-panfrost/shmem: Silence lockdep by using mutex_trylock (Rob)
-panfrost: Miscellaneous small fixes (Rob/Steven)
-sti: Fix warnings (Benjamin/Linus)
-sun4i:
-Add vcc-dsi regulator to sun6i_mipi_dsi (Jagan)
-A few patches to figure out the DRQ/start delay calc on dsi (Jagan/Icenowy)
-virtio:
-Add module param to switch resource reuse workaround on/off (Gerd)
-Avoid calling vmexit while holding spinlock (Gerd)
-Use gem shmem helpers instead of ttm (Gerd)
-Accommodate command buffer allocations too big for cma (David)
Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Raymond Smith <raymond.smith@arm.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Cc: Lowry Li <Lowry.Li@arm.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Iago Toral Quiroga <itoral@igalia.com>
Cc: David Riley <davidriley@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 10 Oct 2019 01:00:47 AM AEST
# gpg: using RSA key 732C002572DCAF79
# gpg: Can't check signature: public key not found
# Conflicts:
# drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
# drivers/gpu/drm/i915/i915_drv.c
# drivers/gpu/drm/i915/i915_gem.c
# drivers/gpu/drm/i915/i915_gem_gtt.c
# drivers/gpu/drm/i915/i915_vma.c
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009150825.GA227673@art_vandelay
UAPI Changes:
- Never allow userptr into the mappable GGTT (Chris)
No existing users. Avoid anyone from even trying to
spare a deadlock scenario.
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Eliminate struct_mutex use as BKL! (Chris)
Only used for execbuf serialisation.
- Initialize DDI TC and TBT ports (D-I) on Tigerlake (Lucas)
- Fix DKL link training for 2.7GHz and 1.62GHz (Jose)
- Add Tigerlake DKL PHY programming sequences (Clinton)
- Add Tigerlake Thunderbolt PLL divider values (Imre)
- drm/i915: Use helpers for drm_mm_node booleans (Chris)
- Restrict L3 remapping sysfs interface to dwords (Chris)
- Fix audio power up sequence for gen10+ display (Kai)
- Skip redundant execlist resubmission (Chris)
- Only unwedge if we can reset GPU first (Chris)
- Initialise breadcrumb lists on the virtual engine (Chris)
- Don't rely on kernel context existing during early errors (Matt A)
- Update Icelake+ MG_DP_MODE programming table (Clinton)
- Update DMC firmware for Icelake (Anusha)
- Downgrade DP MST error after unplugging TypeC cable (Srinivasan)
- Limit MST modes based on plane size too (Ville)
- Polish intel_tv_mode_valid() (Ville)
- Fix g4x sprite scaling stride check with GTT remapping (Ville)
- Don't advertize non-exisiting crtcs (Ville)
- Clean up encoder->crtc_mask setup (Ville)
- Use tc_port instead of port parameter to MG registers (Jose)
- Remove static variable for aux last status (Jani)
- Implement a better i945gm vblank irq vs. C-states workaround (Ville)
- Make the object creation interface consistent (CQ)
- Rename intel_vga_msr_write() to intel_vga_reset_io_mem() (Jani, Ville)
- Eliminate previous drm_dbg/drm_err usage (Jani)
- Move gmbus setup down to intel_modeset_init() (Jani)
- Abstract all vgaarb access to intel_vga.[ch] (Jani)
- Split out i915_switcheroo.[ch] from i915_drv.c (Jani)
- Use intel_gt in has_reset* (Chris)
- Eliminate return value for i915_gem_init_early (Matt A)
- Selftest improvements (Chris)
- Update HuC firmware header version number format (Daniele)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007134801.GA24313@jlahtine-desk.ger.corp.intel.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXZZIgQAKCRCRxhvAZXjc
orNOAP98B2nmoxvq8d5Z6PhoyTBC5NIUuJ5h2YMwcX/hAaj5uQEA58NTKtPmOPDR
2ffUFFerGZ2+brlHgACa0ZKdH27TjAA=
=QryD
-----END PGP SIGNATURE-----
Merge tag 'copy-struct-from-user-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull copy_struct_from_user() helper from Christian Brauner:
"This contains the copy_struct_from_user() helper which got split out
from the openat2() patchset. It is a generic interface designed to
copy a struct from userspace.
The helper will be especially useful for structs versioned by size of
which we have quite a few. This allows for backwards compatibility,
i.e. an extended struct can be passed to an older kernel, or a legacy
struct can be passed to a newer kernel. For the first case (extended
struct, older kernel) the new fields in an extended struct can be set
to zero and the struct safely passed to an older kernel.
The most obvious benefit is that this helper lets us get rid of
duplicate code present in at least sched_setattr(), perf_event_open(),
and clone3(). More importantly it will also help to ensure that users
implementing versioning-by-size end up with the same core semantics.
This point is especially crucial since we have at least one case where
versioning-by-size is used but with slighly different semantics:
sched_setattr(), perf_event_open(), and clone3() all do do similar
checks to copy_struct_from_user() while rt_sigprocmask(2) always
rejects differently-sized struct arguments.
With this pull request we also switch over sched_setattr(),
perf_event_open(), and clone3() to use the new helper"
* tag 'copy-struct-from-user-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
usercopy: Add parentheses around assignment in test_copy_struct_from_user
perf_event_open: switch to copy_struct_from_user()
sched_setattr: switch to copy_struct_from_user()
clone3: switch to copy_struct_from_user()
lib: introduce copy_struct_from_user() helper
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXZZKNgAKCRCRxhvAZXjc
otfIAPsHUZn+Wfa/8uftNDJ6RLDXDsq6l8xiQTkz+k4YdnDj2AD/aIPjrM950jrS
W7+8R7CSSQOLmIif6R+S0A1fyFoVlQA=
=HVz0
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20191003' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull clone3/pidfd fixes from Christian Brauner:
"This contains a couple of fixes:
- Fix pidfd selftest compilation (Shuah Kahn)
Due to a false linking instruction in the Makefile compilation for
the pidfd selftests would fail on some systems.
- Fix compilation for glibc on RISC-V systems (Seth Forshee)
In some scenarios linux/uapi/linux/sched.h is included where
__ASSEMBLY__ is defined causing a build failure because struct
clone_args was not guarded by an #ifndef __ASSEMBLY__.
- Add missing clone3() and struct clone_args kernel-doc (Christian Brauner)
clone3() and struct clone_args were missing kernel-docs. (The goal
is to use kernel-doc for any function or type where it's worth it.)
For struct clone_args this also contains a comment about the fact
that it's versioned by size"
* tag 'for-linus-20191003' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
sched: add kernel-doc for struct clone_args
fork: add kernel-doc for clone3
selftests: pidfd: Fix undefined reference to pthread_create()
sched: Add __ASSEMBLY__ guards around struct clone_args
core:
- writeback fixes
i915:
- Fix DP-MST crtc_mask
- Fix dsc dpp calculations
- Fix g4x sprite scaling stride check with GTT remapping
- Fix concurrence on cases where requests where getting retired at same time as resubmitted to HW
- Fix gen9 display resolutions by setting the right max plane width
- Fix GPU hang on preemption
- Mark contents as dirty on a write fault. This was breaking cursor sprite with dumb buffers.
komeda:
- memory leak fix
tilcdc:
- include fix
amdgpu:
- Enable bulk moves
- Power metrics fixes for Navi
- Fix S4 regression
- Add query for tcc disabled mask
- Fix several leaks in error paths
- randconfig fixes
- clang fixes
-----BEGIN PGP SIGNATURE-----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=2MxC
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-10-04' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Been offline for 3 days, got back and had some fixes queued up.
Nothing too major, the i915 dp-mst fix is important, and amdgpu has a
bulk move speedup fix and some regressions, but nothing too insane for
an rc2 pull. The intel fixes are also 2 weeks worth, they missed the
boat last week.
core:
- writeback fixes
i915:
- Fix DP-MST crtc_mask
- Fix dsc dpp calculations
- Fix g4x sprite scaling stride check with GTT remapping
- Fix concurrence on cases where requests where getting retired at
same time as resubmitted to HW
- Fix gen9 display resolutions by setting the right max plane width
- Fix GPU hang on preemption
- Mark contents as dirty on a write fault. This was breaking cursor
sprite with dumb buffers.
komeda:
- memory leak fix
tilcdc:
- include fix
amdgpu:
- Enable bulk moves
- Power metrics fixes for Navi
- Fix S4 regression
- Add query for tcc disabled mask
- Fix several leaks in error paths
- randconfig fixes
- clang fixes"
* tag 'drm-fixes-2019-10-04' of git://anongit.freedesktop.org/drm/drm: (21 commits)
Revert "drm/i915: Fix DP-MST crtc_mask"
drm/omap: fix max fclk divider for omap36xx
drm/i915: Fix g4x sprite scaling stride check with GTT remapping
drm/i915/dp: Fix dsc bpp calculations, v5.
drm/amd/display: fix dcn21 Makefile for clang
drm/amd/display: hide an unused variable
drm/amdgpu: display_mode_vba_21: remove uint typedef
drm/amdgpu: hide another #warning
drm/amdgpu: make pmu support optional, again
drm/amd/display: memory leak
drm/amdgpu: fix multiple memory leaks in acp_hw_init
drm/amdgpu: return tcc_disabled_mask to userspace
drm/amdgpu: don't increment vram lost if we are in hibernation
Revert "drm/amdgpu: disable stutter mode for renoir"
drm/amd/powerplay: add sensor lock support for smu
drm/amd/powerplay: change metrics update period from 1ms to 100ms
drm/amdgpu: revert "disable bulk moves for now"
drm/tilcdc: include linux/pinctrl/consumer.h again
drm/komeda: prevent memory leak in komeda_wb_connector_add
drm: Clear the fence pointer when writeback job signaled
...
-----BEGIN PGP SIGNATURE-----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=vKVl
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Mandate timespec64 for the io_uring timeout ABI (Arnd)
- Set of NVMe changes via Sagi:
- controller removal race fix from Balbir
- quirk additions from Gabriel and Jian-Hong
- nvme-pci power state save fix from Mario
- Add 64bit user commands (for 64bit registers) from Marta
- nvme-rdma/nvme-tcp fixes from Max, Mark and Me
- Minor cleanups and nits from James, Dan and John
- Two s390 dasd fixes (Jan, Stefan)
- Have loop change block size in DIO mode (Martijn)
- paride pg header ifdef guard (Masahiro)
- Two blk-mq queue scheduler tweaks, fixing an ordering issue on zoned
devices and suboptimal performance on others (Ming)
* tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block: (22 commits)
block: sed-opal: fix sparse warning: convert __be64 data
block: sed-opal: fix sparse warning: obsolete array init.
block: pg: add header include guard
Revert "s390/dasd: Add discard support for ESE volumes"
s390/dasd: Fix error handling during online processing
io_uring: use __kernel_timespec in timeout ABI
loop: change queue block size to match when using DIO
blk-mq: apply normal plugging for HDD
blk-mq: honor IO scheduler for multiqueue devices
nvme-rdma: fix possible use-after-free in connect timeout
nvme: Move ctrl sqsize to generic space
nvme: Add ctrl attributes for queue_count and sqsize
nvme: allow 64-bit results in passthru commands
nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T
nvmet-tcp: remove superflous check on request sgl
Added QUIRKs for ADATA XPG SX8200 Pro 512GB
nvme-rdma: Fix max_hw_sectors calculation
nvme: fix an error code in nvme_init_subsystem()
nvme-pci: Save PCI state before putting drive into deepest state
nvme-tcp: fix wrong stop condition in io_work
...
Add the DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED modifier to
denote the 16x16 block u-interleaved format used in Arm Utgard and
Midgard GPUs.
Changes from v1:-
1. Reserved the upper four bits (out of the 56 bits assigned to each vendor)
to denote the category of Arm specific modifiers. Currently, we have two
categories ie AFBC and MISC.
Changes from v2:-
1. Preserved Ray's authorship
2. Cleanups/changes suggested by Brian
3. Added r-bs of Brian and Qiang
Signed-off-by: Raymond Smith <raymond.smith@arm.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Ayan kumar halder <ayan.halder@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004141222.22337-1-ayan.halder@arm.com
The port type macros should have different values for different devices.
Currently, PORT_LINFLEXUART conflicts with PORT_SUNIX.
Fixes: 09864c1cdf ("tty: serial: Add linflexuart driver for S32V234")
Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
Link: https://lore.kernel.org/r/20191004135058.18007-1-stefan-gabriel.mirea@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
UMDs need this for correct programming of harvested chips.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UMDs need this for correct programming of harvested chips.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch clone3() syscall from it's own copying struct clone_args from
userspace to the new dedicated copy_struct_from_user() helper.
The change is very straightforward, and helps unify the syscall
interface for struct-from-userspace syscalls. Additionally, explicitly
define CLONE_ARGS_SIZE_VER0 to match the other users of the
struct-extension pattern.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
[christian.brauner@ubuntu.com: improve commit message]
Link: https://lore.kernel.org/r/20191001011055.19283-3-cyphar@cyphar.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The addition of struct clone_args to uapi/linux/sched.h is not protected
by __ASSEMBLY__ guards, causing a failure to build from source for glibc
on RISC-V. Add the guards to fix this.
Fixes: 7f192e3cd3 ("fork: add clone3")
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Cc: <stable@vger.kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20190917071853.12385-1-seth.forshee@canonical.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Pull networking fixes from David Miller:
1) Sanity check URB networking device parameters to avoid divide by
zero, from Oliver Neukum.
2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
don't work properly. Longer term this needs a better fix tho. From
Vijay Khemka.
3) Small fixes to selftests (use ping when ping6 is not present, etc.)
from David Ahern.
4) Bring back rt_uses_gateway member of struct rtable, it's semantics
were not well understood and trying to remove it broke things. From
David Ahern.
5) Move usbnet snaity checking, ignore endpoints with invalid
wMaxPacketSize. From Bjørn Mork.
6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.
7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
Alex Vesker, and Yevgeny Kliteynik
8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.
9) Fix crash when removing sch_cbs entry while offloading is enabled,
from Vinicius Costa Gomes.
10) Signedness bug fixes, generally in looking at the result given by
of_get_phy_mode() and friends. From Dan Crapenter.
11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.
12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.
13) Fix quantization code in tcp_bbr, from Kevin Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
net: tap: clean up an indentation issue
nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
sk_buff: drop all skb extensions on free and skb scrubbing
tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
Documentation: Clarify trap's description
mlxsw: spectrum: Clear VLAN filters during port initialization
net: ena: clean up indentation issue
NFC: st95hf: clean up indentation issue
net: phy: micrel: add Asym Pause workaround for KSZ9021
net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
ptp: correctly disable flags on old ioctls
lib: dimlib: fix help text typos
net: dsa: microchip: Always set regmap stride to 1
nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
...
- add a new knfsd file cache, so that we don't have to open and
close on each (NFSv2/v3) READ or WRITE. This can speed up
read and write in some cases. It also replaces our readahead
cache.
- Prevent silent data loss on write errors, by treating write
errors like server reboots for the purposes of write caching,
thus forcing clients to resend their writes.
- Tweak the code that allocates sessions to be more forgiving,
so that NFSv4.1 mounts are less likely to hang when a server
already has a lot of clients.
- Eliminate an arbitrary limit on NFSv4 ACL sizes; they should
now be limited only by the backend filesystem and the
maximum RPC size.
- Allow the server to enforce use of the correct kerberos
credentials when a client reclaims state after a reboot.
And some miscellaneous smaller bugfixes and cleanup.
-----BEGIN PGP SIGNATURE-----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=diBo
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Highlights:
- Add a new knfsd file cache, so that we don't have to open and close
on each (NFSv2/v3) READ or WRITE. This can speed up read and write
in some cases. It also replaces our readahead cache.
- Prevent silent data loss on write errors, by treating write errors
like server reboots for the purposes of write caching, thus forcing
clients to resend their writes.
- Tweak the code that allocates sessions to be more forgiving, so
that NFSv4.1 mounts are less likely to hang when a server already
has a lot of clients.
- Eliminate an arbitrary limit on NFSv4 ACL sizes; they should now be
limited only by the backend filesystem and the maximum RPC size.
- Allow the server to enforce use of the correct kerberos credentials
when a client reclaims state after a reboot.
And some miscellaneous smaller bugfixes and cleanup"
* tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linux: (34 commits)
sunrpc: clean up indentation issue
nfsd: fix nfs read eof detection
nfsd: Make nfsd_reset_boot_verifier_locked static
nfsd: degraded slot-count more gracefully as allocation nears exhaustion.
nfsd: handle drc over-allocation gracefully.
nfsd: add support for upcall version 2
nfsd: add a "GetVersion" upcall for nfsdcld
nfsd: Reset the boot verifier on all write I/O errors
nfsd: Don't garbage collect files that might contain write errors
nfsd: Support the server resetting the boot verifier
nfsd: nfsd_file cache entries should be per net namespace
nfsd: eliminate an unnecessary acl size limit
Deprecate nfsd fault injection
nfsd: remove duplicated include from filecache.c
nfsd: Fix the documentation for svcxdr_tmpalloc()
nfsd: Fix up some unused variable warnings
nfsd: close cached files prior to a REMOVE or RENAME that would replace target
nfsd: rip out the raparms cache
nfsd: have nfsd_test_lock use the nfsd_file cache
nfsd: hook up nfs4_preprocess_stateid_op to the nfsd_file cache
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXYx2zAAKCRDh3BK/laaZ
PFpHAQD2G+F8a9e41jFTJg5YpNKMD8/Pl4T6v9chIO9qPXF2IAEAji0P1JterRfv
ixiBhv54hSwYbk527nxNWE9tP5gAHAQ=
=WCHy
-----END PGP SIGNATURE-----
Merge tag 'virtio-fs-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse virtio-fs support from Miklos Szeredi:
"Virtio-fs allows exporting directory trees on the host and mounting
them in guest(s).
This isn't actually a new filesystem, but a glue layer between the
fuse filesystem and a virtio based back-end.
It's similar in functionality to the existing virtio-9p solution, but
significantly faster in benchmarks and has better POSIX compliance.
Further permformance improvements can be achieved by sharing the page
cache between host and guest, allowing for faster I/O and reduced
memory use.
Kata Containers have been including the out-of-tree virtio-fs (with
the shared page cache patches as well) since version 1.7 as an
experimental feature. They have been active in development and plan to
switch from virtio-9p to virtio-fs as their default solution. There
has been interest from other sources as well.
The userspace infrastructure is slated to be merged into qemu once the
kernel part hits mainline.
This was developed by Vivek Goyal, Dave Gilbert and Stefan Hajnoczi"
* tag 'virtio-fs-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtio-fs: add virtiofs filesystem
virtio-fs: add Documentation/filesystems/virtiofs.rst
fuse: reserve values for mapping protocol
Some additional RISC-V updates for v5.4-rc1. This includes one
significant fix:
- Prevent interrupts from being unconditionally re-enabled during
exception handling if they were disabled in the context in which the
exception occurred
Also a few other fixes:
- Fix a build error when sparse memory support is manually enabled
- Prevent CPUs beyond CONFIG_NR_CPUS from being enabled in early boot
And a few minor improvements:
- DT improvements: in the FU540 SoC DT files, improve U-Boot
compatibility by adding an "ethernet0" alias, drop an unnecessary
property from the DT files, and add support for the PWM device
- KVM preparation: add a KVM-related macro for future RISC-V KVM
support, and export some symbols required to build KVM support as
modules
- defconfig additions: build more drivers by default for QEMU
configurations
-----BEGIN PGP SIGNATURE-----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=wfz5
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.4-rc1-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
"Some additional RISC-V updates.
This includes one significant fix:
- Prevent interrupts from being unconditionally re-enabled during
exception handling if they were disabled in the context in which
the exception occurred
Also a few other fixes:
- Fix a build error when sparse memory support is manually enabled
- Prevent CPUs beyond CONFIG_NR_CPUS from being enabled in early boot
And a few minor improvements:
- DT improvements: in the FU540 SoC DT files, improve U-Boot
compatibility by adding an "ethernet0" alias, drop an unnecessary
property from the DT files, and add support for the PWM device
- KVM preparation: add a KVM-related macro for future RISC-V KVM
support, and export some symbols required to build KVM support as
modules
- defconfig additions: build more drivers by default for QEMU
configurations"
* tag 'riscv/for-v5.4-rc1-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Avoid interrupts being erroneously enabled in handle_exception()
riscv: dts: sifive: Drop "clock-frequency" property of cpu nodes
riscv: dts: sifive: Add ethernet0 to the aliases node
RISC-V: Export kernel symbols for kvm
KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface
arch/riscv: disable excess harts before picking main boot hart
RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig
RISC-V: Fix building error when CONFIG_SPARSEMEM_MANUAL=y
riscv: dts: Add DT support for SiFive FU540 PWM driver
