Even if no response from hardware, we should make sure that qp related
resources are released to avoid memory leaks.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1570584110-3659-1-git-send-email-liweihang@hisilicon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
The restrack function return EINVAL instead of EMSGSIZE when the driver
operation fails.
Fixes: 4b42d05d0b ("RDMA/hns: Remove unnecessary kzalloc")
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-5-git-send-email-liweihang@hisilicon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
The parameters npages used to initial mtt of srq->idx_que shouldn't be
same with srq's. And page_shift should be calculated from idx_buf_pg_sz.
This patch fixes above issues and use field named npage and page_shift
in hns_roce_buf instead of two temporary variables to let us use them
anywhere.
Fixes: 18df508c79 ("RDMA/hns: Remove if-else judgment statements for creating srq")
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Current code tries to derive VLAN ID and compares it with GID
attribute for matching entry. This raw search fails on macvlan
netdevice as its not a VLAN device, but its an upper device of a VLAN
netdevice.
Due to this limitation, incoming QP1 packets fail to match in the
GID table. Such packets are dropped.
Hence, to support it, use the existing rdma_read_gid_l2_fields()
that takes care of diffferent device types.
Fixes: dbf727de74 ("IB/core: Use GID table in AH creation and dmac resolution")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191002121750.17313-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
As siw_free_qp() is the last routine to access 'siw_base_qp' structure,
freeing this structure early in siw_destroy_qp() could cause
touch-after-free issue.
Hence, moved kfree(siw_base_qp) from siw_destroy_qp() to siw_free_qp().
Fixes: 303ae1cdfd ("rdma/siw: application interface")
Signed-off-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Link: https://lore.kernel.org/r/20191007104229.29412-1-krishna2@chelsio.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
kref release routines usually perform memory release operations,
hence, they should not be called with spinlocks held.
one such case is: SIW kref release routine siw_free_qp(), which
can sleep via vfree() while freeing queue memory.
Hence, all iw_rem_ref() calls in IWCM are moved out of spinlocks.
Fixes: 922a8e9fb2 ("RDMA: iWARP Connection Manager.")
Signed-off-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20191007102627.12568-1-krishna2@chelsio.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
pass_accept_req() is using the same skb for handling accept request and
sending accept reply to HW. Here req and rpl structures are pointing to
same skb->data which is over written by INIT_TP_WR() and leads to
accessing corrupt req fields in accept_cr() while checking for ECN flags.
Reordered code in accept_cr() to fetch correct req fields.
Fixes: 92e7ae7172 ("iw_cxgb4: Choose appropriate hw mtu index and ISS for iWARP connections")
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://lore.kernel.org/r/20191003104353.11590-1-bharat@chelsio.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is no reason for a different pad buffer for the two
packet types.
Expand the current buffer allocation to allow for both
packet types.
Fixes: f8195f3b14 ("IB/hfi1: Eliminate allocation while atomic")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20191004204934.26838.13099.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
A TID RDMA READ request could be retried under one of the following
conditions:
- The RC retry timer expires;
- A later TID RDMA READ RESP packet is received before the next
expected one.
For the latter, under normal conditions, the PSN in IB space is used
for comparison. More specifically, the IB PSN in the incoming TID RDMA
READ RESP packet is compared with the last IB PSN of a given TID RDMA
READ request to determine if the request should be retried. This is
similar to the retry logic for noraml RDMA READ request.
However, if a TID RDMA READ RESP packet is lost due to congestion,
header suppresion will be disabled and each incoming packet will raise
an interrupt until the hardware flow is reloaded. Under this condition,
each packet KDETH PSN will be checked by software against r_next_psn
and a retry will be requested if the packet KDETH PSN is later than
r_next_psn. Since each TID RDMA READ segment could have up to 64
packets and each TID RDMA READ request could have many segments, we
could make far more retries under such conditions, and thus leading to
RETRY_EXC_ERR status.
This patch fixes the issue by removing the retry when the incoming
packet KDETH PSN is later than r_next_psn. Instead, it resorts to
RC timer and normal IB PSN comparison for any request retry.
Fixes: 9905bf06e8 ("IB/hfi1: Add functions to receive TID RDMA READ response")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20191004204035.26542.41684.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Before QP is closed it changes to ERROR state, when this happens
the QP was left with old rate limit that was already removed from
the table.
Fixes: 7d29f349a4 ("IB/mlx5: Properly adjust rate limit on QP state transitions")
Signed-off-by: Rafi Wiener <rafiw@mellanox.com>
Signed-off-by: Oleg Kuporosov <olegk@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191002120243.16971-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Make sure all the debug prints in ib_iser module use the common driver
logger.
Link: https://lore.kernel.org/r/1570366580-24097-1-git-send-email-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Broadcom's 575xx adapter series has support for SRIOV VFs. Making changes
to enable SRIOV VF support. There are two major area where changes are
done:
- Added new DB location for control-path and data-path DB ring
- New devices do not need to issue the sriov-config slow-path command
thus, skipping to call that firmware command.
For now enabling support for 64 RoCE VFs.
Link: https://lore.kernel.org/r/1570081715-14301-1-git-send-email-devesh.sharma@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The default maximum immediate size is too big for old srp clients, which
do not support immediate data.
According to the SRP and SRP-2 specifications, the IOControllerProfile
attributes for SRP target ports contains the maximum initiator to target
iu length.
The maximum initiator to target iu length can be obtained by sending MAD
packets to query subnet manager port and SRP target ports. We should
calculate the max_it_iu_size instead of the default value, when remote
maximum initiator to target iu length available.
Link: https://lore.kernel.org/r/20190927174352.7800-2-honli@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
According to SRP specifications 'srp-r16a' and 'srp2r06',
IOControllerProfile attributes for SRP target port include the maximum
initiator to target IU size.
SRP connection daemons, such as srp_daemon, can get the value from the
subnet manager. The SRP connection daemon can pass this value to kernel.
This patch adds a parse function for it.
Upstream commit [1] enables the kernel parameter, 'use_imm_data', by
default. [1] also use (8 * 1024) as the default value for kernel parameter
'max_imm_data'. With those default values, the maximum initiator to target
IU size will be 8260.
In case the SRPT modules, which include the in-tree 'ib_srpt.ko' module,
do not support SRP-2 'immediate data' feature, the default maximum
initiator to target IU size is significantly smaller than 8260. For
'ib_srpt.ko' module, which built from source before [2], the default
maximum initiator to target IU is 2116.
[1] introduces a regression issue for old srp targets with default kernel
parameters, as the connection will be rejected because of a too large
maximum initiator to target IU size.
[1] commit 882981f4a4 ("RDMA/srp: Add support for immediate data")
[2] commit 5dabcd0456 ("RDMA/srpt: Add support for immediate data")
Link: https://lore.kernel.org/r/20190927174352.7800-1-honli@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
While MR uses live as the SRCU 'update', the MW case uses the xarray
directly, xa_erase() causes the MW to become inaccessible to the pagefault
thread.
Thus whenever a MW is removed from the xarray we must synchronize_srcu()
before freeing it.
This must be done before freeing the mkey as re-use of the mkey while the
pagefault thread is using the stale mkey is undesirable.
Add the missing synchronizes to MW and DEVX indirect mkey and delete the
bogus protection against double destroy in mlx5_core_destroy_mkey()
Fixes: 534fd7aac5 ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-7-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
live is used to signal to the pagefault thread that the MR is initialized
and ready for use. It should be after the umem is assigned and all other
setup is completed. This prevents races (at least) of the form:
CPU0 CPU1
mlx5_ib_alloc_implicit_mr()
implicit_mr_alloc()
live = 1
imr->umem = umem
num_pending_prefetch_inc()
if (live)
atomic_inc(num_pending_prefetch)
atomic_set(num_pending_prefetch,0) // Overwrites other thread's store
Further, live is being used with SRCU as the 'update' in an
acquire/release fashion, so it can not be read and written raw.
Move all live = 1's to after MR initialization is completed and use
smp_store_release/smp_load_acquire() for manipulating it.
Add a missing live = 0 when an implicit MR child is deleted, before
queuing work to do synchronize_srcu().
The barriers in update_odp_mr() were some broken attempt to create a
acquire/release, but were not even applied consistently and missed the
point, delete it as well.
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-6-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
During destroy setting live = 0 and then synchronize_srcu() prevents
num_pending_prefetch from incrementing, and also, ensures that all work
holding that count is queued on the WQ. Testing before causes races of the
form:
CPU0 CPU1
dereg_mr()
mlx5_ib_advise_mr_prefetch()
srcu_read_lock()
num_pending_prefetch_inc()
if (!live)
live = 0
atomic_read() == 0
// skip flush_workqueue()
atomic_inc()
queue_work();
srcu_read_unlock()
WARN_ON(atomic_read()) // Fails
Swap the order so that the synchronize_srcu() prevents this.
Fixes: a6bc3875f1 ("IB/mlx5: Protect against prefetch of invalid MR")
Link: https://lore.kernel.org/r/20191001153821.23621-5-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This fixes a race of the form:
CPU0 CPU1
mlx5_ib_invalidate_range() mlx5_ib_invalidate_range()
// This one actually makes npages == 0
ib_umem_odp_unmap_dma_pages()
if (npages == 0 && !dying)
// This one does nothing
ib_umem_odp_unmap_dma_pages()
if (npages == 0 && !dying)
dying = 1;
dying = 1;
schedule_work(&umem_odp->work);
// Double schedule of the same work
schedule_work(&umem_odp->work); // BOOM
npages and dying must be read and written under the umem_mutex lock.
Since whenever ib_umem_odp_unmap_dma_pages() is called mlx5 must also call
mlx5_ib_update_xlt, and both need to be done in the same locking region,
hoist the lock out of unmap.
This avoids an expensive double critical section in
mlx5_ib_invalidate_range().
Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191001153821.23621-4-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mlx5_ib_update_xlt() must be protected against parallel free of the MR it
is accessing, also it must be called single threaded while updating the
HW. Otherwise we can have races of the form:
CPU0 CPU1
mlx5_ib_update_xlt()
mlx5_odp_populate_klm()
odp_lookup() == NULL
pklm = ZAP
implicit_mr_get_data()
implicit_mr_alloc()
<update interval tree>
mlx5_ib_update_xlt
mlx5_odp_populate_klm()
odp_lookup() != NULL
pklm = VALID
mlx5_ib_post_send_wait()
mlx5_ib_post_send_wait() // Replaces VALID with ZAP
This can be solved by putting both the SRCU and the umem_mutex lock around
every call to mlx5_ib_update_xlt(). This ensures that the content of the
interval tree relavent to mlx5_odp_populate_klm() (ie mr->parent == mr)
will not change while it is running, and thus the posted WRs to update the
KLM will always reflect the correct information.
The race above will resolve by either having CPU1 wait till CPU0 completes
the ZAP or CPU0 will run after the add and instead store VALID.
The pagefault path adding children already holds the umem_mutex and SRCU,
so the only missed lock is during MR destruction.
Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191001153821.23621-3-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This code is completely broken, the umem of a ODP MR simply cannot be
discarded without a lot more locking, nor can an ODP mkey be blithely
destroyed via destroy_mkey().
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-2-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdma_for_each_port is already incrementing the iterator's value it
receives therefore, after the first iteration the iterator is increased by
2 which eventually causing wrong queries and possible traces.
Fix the above by removing the old redundant incrementation that was used
before rdma_for_each_port() macro.
Cc: <stable@vger.kernel.org>
Fixes: ea1075edcb ("RDMA: Add and use rdma_for_each_port")
Link: https://lore.kernel.org/r/20191002122127.17571-1-leon@kernel.org
Signed-off-by: Mohamad Heib <mohamadh@mellanox.com>
Reviewed-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use container_of() macro to get to timewait info structure instead of
typecasting.
Link: https://lore.kernel.org/r/20191002122517.17721-5-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
'else' is not generally useful after a break or return. Remove this
unnecessary statement.
Link: https://lore.kernel.org/r/20191002122517.17721-4-leon@kernel.org
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no reason to call return at the end of function which returns
void. Remove this unnecessary statement.
Link: https://lore.kernel.org/r/20191002122517.17721-3-leon@kernel.org
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Clean the code to store all boolean parameters inside one variable.
Link: https://lore.kernel.org/r/20191002122517.17721-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce a new data structure for the information about an RDMA port
name. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20190930231707.48259-15-bvanassche@acm.org
Cc: Honggang LI <honli@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current implementation does not wait until srpt_release_channel()
has finished and hence can trigger a use-after-free. Rework
srpt_release_sport() such that it waits until srpt_release_channel()
has finished. This patch fixes the following KASAN complaint:
==================================================================
BUG: KASAN: use-after-free in srpt_free_ioctx.part.23+0x42/0x100 [ib_srpt]
Read of size 8 at addr ffff888115c71100 by task kworker/4:3/807
CPU: 4 PID: 807 Comm: kworker/4:3 Not tainted 5.3.0-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: events srpt_release_channel_work [ib_srpt]
Call Trace:
dump_stack+0x86/0xca
print_address_description+0x74/0x32d
__kasan_report.cold.6+0x1b/0x36
kasan_report+0x12/0x17
__asan_load8+0x54/0x90
srpt_free_ioctx.part.23+0x42/0x100 [ib_srpt]
srpt_free_ioctx_ring.part.24+0x50/0x80 [ib_srpt]
srpt_release_channel_work+0x2ad/0x390 [ib_srpt]
process_one_work+0x51a/0xa60
worker_thread+0x67/0x5b0
kthread+0x1dc/0x200
ret_from_fork+0x24/0x30
Allocated by task 984:
save_stack+0x21/0x90
__kasan_kmalloc.constprop.9+0xc7/0xd0
kasan_kmalloc+0x9/0x10
__kmalloc+0x153/0x370
srpt_add_one+0x4f/0x570 [ib_srpt]
add_client_context+0x251/0x290 [ib_core]
ib_register_client+0x1da/0x220 [ib_core]
iblock_get_alignment_offset_lbas+0x6b/0x100 [target_core_iblock]
do_one_initcall+0xcd/0x43a
do_init_module+0x103/0x380
load_module+0x3b77/0x3eb0
__do_sys_finit_module+0x12d/0x1b0
__x64_sys_finit_module+0x43/0x50
do_syscall_64+0x6b/0x2d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 1128:
save_stack+0x21/0x90
__kasan_slab_free+0x139/0x190
kasan_slab_free+0xe/0x10
slab_free_freelist_hook+0x67/0x1e0
kfree+0xcb/0x2a0
srpt_remove_one+0x569/0x5b0 [ib_srpt]
remove_client_context+0x9a/0xe0 [ib_core]
disable_device+0x106/0x1b0 [ib_core]
__ib_unregister_device+0x5f/0xf0 [ib_core]
ib_unregister_device_and_put+0x48/0x60 [ib_core]
nldev_dellink+0x120/0x180 [ib_core]
rdma_nl_rcv+0x287/0x480 [ib_core]
netlink_unicast+0x2cc/0x370
netlink_sendmsg+0x3b1/0x630
__sys_sendto+0x1db/0x290
__x64_sys_sendto+0x80/0xa0
do_syscall_64+0x6b/0x2d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff888115c71100
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 0 bytes inside of
4096-byte region [ffff888115c71100, ffff888115c72100)
The buggy address belongs to the page:
page:ffffea0004571c00 refcount:1 mapcount:0 mapping:ffff88811ac0de00 index:0xffff888115c70000 compound_mapcount: 0
flags: 0x2fff000000010200(slab|head)
raw: 2fff000000010200 ffffea00045ac408 ffffea0004593208 ffff88811ac0de00
raw: ffff888115c70000 0000000000070002 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888115c71000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888115c71080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888115c71100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888115c71180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888115c71200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Link: https://lore.kernel.org/r/20190930231707.48259-14-bvanassche@acm.org
Cc: Honggang LI <honli@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of relying on a waitqueue, report when the identity of an RDMA
channel can be reused through a completion.
Link: https://lore.kernel.org/r/20190930231707.48259-13-bvanassche@acm.org
Cc: Honggang LI <honli@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ib_srpt driver uses two different identifiers while registering a
session with the LIO core. Report both identifiers if the modified
pr_debug() statement is enabled.
Link: https://lore.kernel.org/r/20190930231707.48259-12-bvanassche@acm.org
Cc: Honggang LI <honli@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The path_rec pointer is NULL set for IB and RoCE logins but not for iWARP
logins. Hence check the path_rec pointer before dereferencing it.
Link: https://lore.kernel.org/r/20190930231707.48259-11-bvanassche@acm.org
Cc: Honggang LI <honli@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Management datagrams (MADs) are not supported by SR-IOV VFs nor by iWARP
ports. Support SR-IOV VFs and iWARP ports by only logging an error message
if MAD handler registration fails.
Link: https://lore.kernel.org/r/20190930231707.48259-10-bvanassche@acm.org
Cc: Honggang LI <honli@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The IPv6 scope ID is essential when setting up an iWARP connection
between IPv6 link-local addresses. Report the scope ID in error messages.
Link: https://lore.kernel.org/r/20190930231707.48259-9-bvanassche@acm.org
Cc: Honggang LI <honli@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of assuming that max_send_sge >= 3, restrict the number of scatter
gather elements to what is supported by the RDMA adapter.
Link: https://lore.kernel.org/r/20190930231707.48259-8-bvanassche@acm.org
Cc: Honggang LI <honli@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch does not change any functionality.
Link: https://lore.kernel.org/r/20190930231707.48259-7-bvanassche@acm.org
Cc: Honggang LI <honli@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
>From the IBTA: "GUID (Global Unique Identifier): A globally unique EUI-64
compliant identifier." Make sure that siw GUIDs are valid EUI-64 identifiers.
Link: https://lore.kernel.org/r/20190930231707.48259-6-bvanassche@acm.org
Cc: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Properly unwind QP counter rebinding in case of failure.
Trying to rebind the counter after unbiding it is not going to work
reliably, move the unbind to the end so it doesn't have to be unwound.
Fixes: b389327df9 ("RDMA/nldev: Allow counter manual mode configration through RDMA netlink")
Link: https://lore.kernel.org/r/20191002115627.16740-1-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Nicolas pointed out that the cxgb4 driver is doing dma off of the stack,
which is generally considered a very bad thing. On some architectures it
could be a security problem, but odds are none of them actually run this
driver, so it's just a "normal" bug.
Resolve this by allocating the memory for a message off of the heap
instead of the stack. kmalloc() always will give us a proper memory
location that DMA will work correctly from.
Link: https://lore.kernel.org/r/20191001165611.GA3542072@kroah.com
Reported-by: Nicolas Waisman <nico@semmle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the process of moving the debug counters sysfs entries, the commit
mentioned below eliminated the cm_infiniband sysfs directory.
This sysfs directory was tied to the cm_port object allocated in procedure
cm_add_one().
Before the commit below, this cm_port object was freed via a call to
kobject_put(port->kobj) in procedure cm_remove_port_fs().
Since port no longer uses its kobj, kobject_put(port->kobj) was eliminated.
This, however, meant that kfree was never called for the cm_port buffers.
Fix this by adding explicit kfree(port) calls to functions cm_add_one()
and cm_remove_one().
Note: the kfree call in the first chunk below (in the cm_add_one error
flow) fixes an old, undetected memory leak.
Fixes: c87e65cfb9 ("RDMA/cm: Move debug counters to be under relevant IB device")
Link: https://lore.kernel.org/r/20190916071154.20383-2-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
According to surrounding error paths, it is likely that 'goto err_get;' is
expected here. Otherwise, a call to 'rdma_restrack_put(res);' would be
missing.
Fixes: c5dfe0ea6f ("RDMA/nldev: Add resource tracker doit callback")
Link: https://lore.kernel.org/r/20190818091044.8845-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
i40iw IB device registration fails with ENODEV.
ib_register_device
setup_device/setup_port_data
i40iw_port_immutable
ib_query_port
iw_query_port
ib_device_get_netdev(ENODEV)
ib_device_get_netdev() does not have a netdev associated
with the ibdev and thus fails.
Use ib_device_set_netdev() to associate netdev to ibdev
in i40iw before IB device registration.
Fixes: 4929116bdf ("RDMA/core: Add common iWARP query port")
Link: https://lore.kernel.org/r/20190925164524.856-1-shiraz.saleem@intel.com
Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Reviewed-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to return always zero for function which is not
supported.
Link: https://lore.kernel.org/r/20190923104158.5331-3-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The proper return code is "-EOPNOTSUPP" when modify_device callback is not
supported.
Link: https://lore.kernel.org/r/20190923104158.5331-2-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
sin_port and sin6_port are big endian member variables. Convert these port
numbers into CPU endianness before printing.
Link: https://lore.kernel.org/r/20190930231707.48259-5-bvanassche@acm.org
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Do not print the remote address if it is not used. Use %pISp instead of
%pI4 %d.
Link: https://lore.kernel.org/r/20190930231707.48259-4-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch fixes the lock inversion complaint:
============================================
WARNING: possible recursive locking detected
5.3.0-rc7-dbg+ #1 Not tainted
--------------------------------------------
kworker/u16:6/171 is trying to acquire lock:
00000000035c6e6c (&id_priv->handler_mutex){+.+.}, at: rdma_destroy_id+0x78/0x4a0 [rdma_cm]
but task is already holding lock:
00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&id_priv->handler_mutex);
lock(&id_priv->handler_mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by kworker/u16:6/171:
#0: 00000000e2eaa773 ((wq_completion)iw_cm_wq){+.+.}, at: process_one_work+0x472/0xac0
#1: 000000001efd357b ((work_completion)(&work->work)#3){+.+.}, at: process_one_work+0x476/0xac0
#2: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm]
stack backtrace:
CPU: 3 PID: 171 Comm: kworker/u16:6 Not tainted 5.3.0-rc7-dbg+ #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
dump_stack+0x8a/0xd6
__lock_acquire.cold+0xe1/0x24d
lock_acquire+0x106/0x240
__mutex_lock+0x12e/0xcb0
mutex_lock_nested+0x1f/0x30
rdma_destroy_id+0x78/0x4a0 [rdma_cm]
iw_conn_req_handler+0x5c9/0x680 [rdma_cm]
cm_work_handler+0xe62/0x1100 [iw_cm]
process_one_work+0x56d/0xac0
worker_thread+0x7a/0x5d0
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
This is not a bug as there are actually two lock classes here.
Link: https://lore.kernel.org/r/20190930231707.48259-3-bvanassche@acm.org
Fixes: de910bd921 ("RDMA/cma: Simplify locking needed for serialization of callbacks")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
dump_qp() is wrongly trying to dump SRQ structures as QP when SRQ is used
by the application. This patch matches the QPID before dumping them. Also
removes unwanted SRQ id addition to QP id xarray.
Fixes: 2f43129127 ("cxgb4: Convert qpidr to XArray")
Link: https://lore.kernel.org/r/20190930074119.20046-1-bharat@chelsio.com
Signed-off-by: Rahul Kundu <rahul.kundu@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In sdma_init if rhashtable_init fails the allocated memory for
tmp_sdma_rht should be released.
Fixes: 5a52a7acf7 ("IB/hfi1: NULL pointer dereference when freeing rhashtable")
Link: https://lore.kernel.org/r/20190925144543.10141-1-navid.emamdoost@gmail.com
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If an iWARP driver is probed and removed while there are no ips set for
the device, it will lead to a reference count leak on the inet device of
the netdevice.
In addition, the netdevice was accessed after already calling netdev_put,
which could lead to using the netdev after already freed.
Fixes: 4929116bdf ("RDMA/core: Add common iWARP query port")
Link: https://lore.kernel.org/r/20190925123332.10746-1-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In case we don't set the sg_prot_tablesize, the scsi layer assign the
default size (65535 entries). We should limit this size since we should
take into consideration the underlaying device capability. This cap is
considered when calculating the sg_tablesize. Otherwise, for example,
we can get that /sys/block/sdb/queue/max_segments is 128 and
/sys/block/sdb/queue/max_integrity_segments is 65535.
Link: https://lore.kernel.org/r/1569359027-10987-1-git-send-email-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_post_send, ib_post_recv and ib_dma_map_sg operations should succeed
unless something unusual happened to the ib device.
Link: https://lore.kernel.org/r/1569274369-29217-1-git-send-email-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
An extra kfree cleanup was missed since these are now deallocated by core.
Link: https://lore.kernel.org/r/1568848066-12449-1-git-send-email-aditr@vmware.com
Cc: <stable@vger.kernel.org>
Fixes: 68e326dea1 ("RDMA: Handle SRQ allocations by IB/core")
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If auto mode is configured, manual counter allocation and QP bind is not
allowed.
Fixes: 1bd8e0a9d0 ("RDMA/counter: Allow manual mode configuration support")
Link: https://lore.kernel.org/r/20190916071154.20383-3-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull networking fixes from David Miller:
1) Sanity check URB networking device parameters to avoid divide by
zero, from Oliver Neukum.
2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
don't work properly. Longer term this needs a better fix tho. From
Vijay Khemka.
3) Small fixes to selftests (use ping when ping6 is not present, etc.)
from David Ahern.
4) Bring back rt_uses_gateway member of struct rtable, it's semantics
were not well understood and trying to remove it broke things. From
David Ahern.
5) Move usbnet snaity checking, ignore endpoints with invalid
wMaxPacketSize. From Bjørn Mork.
6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.
7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
Alex Vesker, and Yevgeny Kliteynik
8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.
9) Fix crash when removing sch_cbs entry while offloading is enabled,
from Vinicius Costa Gomes.
10) Signedness bug fixes, generally in looking at the result given by
of_get_phy_mode() and friends. From Dan Crapenter.
11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.
12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.
13) Fix quantization code in tcp_bbr, from Kevin Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
net: tap: clean up an indentation issue
nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
sk_buff: drop all skb extensions on free and skb scrubbing
tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
Documentation: Clarify trap's description
mlxsw: spectrum: Clear VLAN filters during port initialization
net: ena: clean up indentation issue
NFC: st95hf: clean up indentation issue
net: phy: micrel: add Asym Pause workaround for KSZ9021
net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
ptp: correctly disable flags on old ioctls
lib: dimlib: fix help text typos
net: dsa: microchip: Always set regmap stride to 1
nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
...
Merge updates from Andrew Morton:
- a few hot fixes
- ocfs2 updates
- almost all of -mm (slab-generic, slab, slub, kmemleak, kasan,
cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug,
sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy,
oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap,
zsmalloc)
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
mm/zsmalloc.c: fix a -Wunused-function warning
zswap: do not map same object twice
zswap: use movable memory if zpool support allocate movable memory
zpool: add malloc_support_movable to zpool_driver
shmem: fix obsolete comment in shmem_getpage_gfp()
mm/madvise: reduce code duplication in error handling paths
mm: mmap: increase sockets maximum memory size pgoff for 32bits
mm/mmap.c: refine find_vma_prev() with rb_last()
riscv: make mmap allocation top-down by default
mips: use generic mmap top-down layout and brk randomization
mips: replace arch specific way to determine 32bit task with generic version
mips: adjust brk randomization offset to fit generic version
mips: use STACK_TOP when computing mmap base address
mips: properly account for stack randomization and stack guard gap
arm: use generic mmap top-down layout and brk randomization
arm: use STACK_TOP when computing mmap base address
arm: properly account for stack randomization and stack guard gap
arm64, mm: make randomization selected by generic topdown mmap layout
arm64, mm: move generic mmap layout functions to mm
arm64: consider stack randomization for mmap base only when necessary
...
[11~From: John Hubbard <jhubbard@nvidia.com>
Subject: mm/gup: add make_dirty arg to put_user_pages_dirty_lock()
Patch series "mm/gup: add make_dirty arg to put_user_pages_dirty_lock()",
v3.
There are about 50+ patches in my tree [2], and I'll be sending out the
remaining ones in a few more groups:
* The block/bio related changes (Jerome mostly wrote those, but I've had
to move stuff around extensively, and add a little code)
* mm/ changes
* other subsystem patches
* an RFC that shows the current state of the tracking patch set. That
can only be applied after all call sites are converted, but it's good to
get an early look at it.
This is part a tree-wide conversion, as described in fc1d8e7cca ("mm:
introduce put_user_page*(), placeholder versions").
This patch (of 3):
Provide more capable variation of put_user_pages_dirty_lock(), and delete
put_user_pages_dirty(). This is based on the following:
1. Lots of call sites become simpler if a bool is passed into
put_user_page*(), instead of making the call site choose which
put_user_page*() variant to call.
2. Christoph Hellwig's observation that set_page_dirty_lock() is
usually correct, and set_page_dirty() is usually a bug, or at least
questionable, within a put_user_page*() calling chain.
This leads to the following API choices:
* put_user_pages_dirty_lock(page, npages, make_dirty)
* There is no put_user_pages_dirty(). You have to
hand code that, in the rare case that it's
required.
[jhubbard@nvidia.com: remove unused variable in siw_free_plist()]
Link: http://lkml.kernel.org/r/20190729074306.10368-1-jhubbard@nvidia.com
Link: http://lkml.kernel.org/r/20190724044537.10458-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This cycle mainly saw lots of bug fixes and clean up code across the core
code and several drivers, few new functional changes were made.
- Many cleanup and bug fixes for hns
- Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
bnxt_re, efa
- Share the query_port code between all the iWarp drivers
- General rework and cleanup of the ODP MR umem code to fit better with
the mmu notifier get/put scheme
- Support rdma netlink in non init_net name spaces
- mlx5 support for XRC devx and DC ODP
-----BEGIN PGP SIGNATURE-----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=zHXW
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull RDMA subsystem updates from Jason Gunthorpe:
"This cycle mainly saw lots of bug fixes and clean up code across the
core code and several drivers, few new functional changes were made.
- Many cleanup and bug fixes for hns
- Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
bnxt_re, efa
- Share the query_port code between all the iWarp drivers
- General rework and cleanup of the ODP MR umem code to fit better
with the mmu notifier get/put scheme
- Support rdma netlink in non init_net name spaces
- mlx5 support for XRC devx and DC ODP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA: Fix double-free in srq creation error flow
RDMA/efa: Fix incorrect error print
IB/mlx5: Free mpi in mp_slave mode
IB/mlx5: Use the original address for the page during free_pages
RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp"
RDMA/hns: Package operations of rq inline buffer into separate functions
RDMA/hns: Optimize cmd init and mode selection for hip08
IB/hfi1: Define variables as unsigned long to fix KASAN warning
IB/{rdmavt, hfi1, qib}: Add a counter for credit waits
IB/hfi1: Add traces for TID RDMA READ
RDMA/siw: Relax from kmap_atomic() use in TX path
IB/iser: Support up to 16MB data transfer in a single command
RDMA/siw: Fix page address mapping in TX path
RDMA: Fix goto target to release the allocated memory
RDMA/usnic: Avoid overly large buffers on stack
RDMA/odp: Add missing cast for 32 bit
RDMA/hns: Use devm_platform_ioremap_resource() to simplify code
Documentation/infiniband: update name of some functions
RDMA/cma: Fix false error message
RDMA/hns: Fix wrong assignment of qp_access_flags
...
This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a cleanup
to the page walker API and a few memremap related changes round out the
series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE, and
make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of drivers by
using a refcount get/put attachment idiom and remove the convoluted
mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its only
user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without providing
a struct device
- Make walk_page_range() and related use a constant structure for function
pointers
-----BEGIN PGP SIGNATURE-----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=FRGg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a
cleanup to the page walker API and a few memremap related changes
round out the series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE,
and make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of
drivers by using a refcount get/put attachment idiom and remove the
convoluted mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its
only user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without
providing a struct device
- Make walk_page_range() and related use a constant structure for
function pointers"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits)
libnvdimm: Enable unit test infrastructure compile checks
mm, notifier: Catch sleeping/blocking for !blockable
kernel.h: Add non_block_start/end()
drm/radeon: guard against calling an unpaired radeon_mn_unregister()
csky: add missing brackets in a macro for tlb.h
pagewalk: use lockdep_assert_held for locking validation
pagewalk: separate function pointers from iterator data
mm: split out a new pagewalk.h header from mm.h
mm/mmu_notifiers: annotate with might_sleep()
mm/mmu_notifiers: prime lockdep
mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end
mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports
mm/hmm: hmm_range_fault() infinite loop
mm/hmm: hmm_range_fault() NULL pointer bug
mm/hmm: fix hmm_range_fault()'s handling of swapped out pages
mm/mmu_notifiers: remove unregister_no_release
RDMA/odp: remove ib_ucontext from ib_umem
RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
...
Julian noted that rt_uses_gateway has a more subtle use than 'is gateway
set':
https://lore.kernel.org/netdev/alpine.LFD.2.21.1909151104060.2546@ja.home.ssi.bg/
Revert that part of the commit referenced in the Fixes tag.
Currently, there are no u8 holes in 'struct rtable'. There is a 4-byte hole
in the second cacheline which contains the gateway declaration. So move
rt_gw_family down to the gateway declarations since they are always used
together, and then re-use that u8 for rt_uses_gateway. End result is that
rtable size is unchanged.
Fixes: 1550c17193 ("ipv4: Prepare rtable for IPv6 gateway")
Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Pull vfs namei updates from Al Viro:
"Pathwalk-related stuff"
[ Audit-related cleanups, misc simplifications, and easier to follow
nd->root refcounts - Linus ]
* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
devpts_pty_kill(): don't bother with d_delete()
infiniband: don't bother with d_delete()
hypfs: don't bother with d_delete()
fs/namei.c: keep track of nd->root refcount status
fs/namei.c: new helper - legitimize_root()
kill the last users of user_{path,lpath,path_dir}()
namei.h: get the comments on LOOKUP_... in sync with reality
kill LOOKUP_NO_EVAL, don't bother including namei.h from audit.h
audit_inode(): switch to passing AUDIT_INODE_...
filename_mountpoint(): make LOOKUP_NO_EVAL unconditional there
filename_lookup(): audit_inode() argument is always 0
Pull networking updates from David Miller:
1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.
2) Use bio_vec in the networking instead of custom skb_frag_t, from
Matthew Wilcox.
3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.
4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.
5) Support all variants of 5750X bnxt_en chips, from Michael Chan.
6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
Buslov.
7) Add TCP syn cookies bpf helper, from Petar Penkov.
8) Add 'nettest' to selftests and use it, from David Ahern.
9) Add extack support to drop_monitor, add packet alert mode and
support for HW drops, from Ido Schimmel.
10) Add VLAN offload to stmmac, from Jose Abreu.
11) Lots of devm_platform_ioremap_resource() conversions, from
YueHaibing.
12) Add IONIC driver, from Shannon Nelson.
13) Several kTLS cleanups, from Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
mlxsw: spectrum: Register CPU port with devlink
mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
net: ena: fix incorrect update of intr_delay_resolution
net: ena: fix retrieval of nonadaptive interrupt moderation intervals
net: ena: fix update of interrupt moderation register
net: ena: remove all old adaptive rx interrupt moderation code from ena_com
net: ena: remove ena_restore_ethtool_params() and relevant fields
net: ena: remove old adaptive interrupt moderation code from ena_netdev
net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
net: ena: enable the interrupt_moderation in driver_supported_features
net: ena: reimplement set/get_coalesce()
net: ena: switch to dim algorithm for rx adaptive interrupt moderation
net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
ethtool: implement Energy Detect Powerdown support via phy-tunable
xen-netfront: do not assume sk_buff_head list is empty in error handling
s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
net: ena: don't wake up tx queue when down
drop_monitor: Better sanitize notified packets
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXYAIeQAKCRBiEGxRG/Sl
2/SzAQDEnoNxzV/R5kWFd+2kmFeY3cll0d99KMrWJ8om+kje6QD/cXxZHzFm+T1L
UPF66k76oOODV7cyndjXnTnRXbeCRAM=
=Szby
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this cycle we've finally managed to contribute the patch set
sorting out LED naming issues. Besides that there are many changes
scattered among various LED class drivers and triggers.
LED naming related improvements:
- add new 'function' and 'color' fwnode properties and deprecate
'label' property which has been frequently abused for conveying
vendor specific names that have been available in sysfs anyway
- introduce a set of standard LED_FUNCTION* definitions
- introduce a set of standard LED_COLOR_ID* definitions
- add a new {devm_}led_classdev_register_ext() API with the
capability of automatic LED name composition basing on the
properties available in the passed fwnode; the function is
backwards compatible in a sense that it uses 'label' data, if
present in the fwnode, for creating LED name
- add tools/leds/get_led_device_info.sh script for retrieving LED
vendor, product and bus names, if applicable; it also performs
basic validation of an LED name
- update following drivers and their DT bindings to use the new LED
registration API:
- leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt
Other LED class improvements:
- replace {devm_}led_classdev_register() macros with inlines
- allow to call led_classdev_unregister() unconditionally
- switch to use fwnode instead of be stuck with OF one
LED triggers improvements:
- led-triggers:
- fix dereferencing of null pointer
- fix a memory leak bug
- ledtrig-gpio:
- GPIO 0 is valid
Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
more complete driver exists, based on a generic driver for the AMD
SOCs gpio-controller, supporting LEDs as well other devices:
- drop profile field from priv data
- drop iosize field from priv data
- drop enum_apu_led_platform_types
- drop superseeded apu2/3 led support
- add pr_fmt prefix for better log output
- fix error message on probing failure
Other misc fixes and improvements to existing LED class drivers:
- leds-ns2, leds-max77650:
- add of_node_put() before return
- leds-pwm, leds-is31fl32xx:
- use struct_size() helper
- leds-lm3697, leds-lm36274, leds-lm3532:
- switch to use fwnode_property_count_uXX()
- leds-lm3532:
- fix brightness control for i2c mode
- change the define for the fs current register
- fixes for the driver for stability
- add full scale current configuration
- dt: Add property for full scale current.
- avoid potentially unpaired regulator calls
- move static keyword to the front of declarations
- fix optional led-max-microamp prop error handling
- leds-max77650:
- add of_node_put() before return
- add MODULE_ALIAS()
- Switch to fwnode property API
- leds-as3645a:
- fix misuse of strlcpy
- leds-netxbig:
- add of_node_put() in netxbig_leds_get_of_pdata()
- remove legacy board-file support
- leds-is31fl319x:
- simplify getting the adapter of a client
- leds-ti-lmu-common:
- fix coccinelle issue
- move static keyword to the front of declaration
- leds-syscon:
- use resource managed variant of device register
- leds-ktd2692:
- fix a typo in the name of a constant
- leds-lp5562:
- allow firmware files up to the maximum length
- leds-an30259a:
- fix typo
- leds-pca953x:
- include the right header"
* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
leds: lm3532: Fix optional led-max-microamp prop error handling
led: triggers: Fix dereferencing of null pointer
leds: ti-lmu-common: Move static keyword to the front of declaration
leds: lm3532: Move static keyword to the front of declarations
leds: trigger: gpio: GPIO 0 is valid
leds: pwm: Use struct_size() helper
leds: is31fl32xx: Use struct_size() helper
leds: ti-lmu-common: Fix coccinelle issue in TI LMU
leds: lm3532: Avoid potentially unpaired regulator calls
leds: syscon: Use resource managed variant of device register
leds: Replace {devm_}led_classdev_register() macros with inlines
leds: Allow to call led_classdev_unregister() unconditionally
leds: lm3532: Add full scale current configuration
dt: lm3532: Add property for full scale current.
leds: lm3532: Fixes for the driver for stability
leds: lm3532: Change the define for the fs current register
leds: lm3532: Fix brightness control for i2c mode
leds: Switch to use fwnode instead of be stuck with OF one
leds: max77650: Switch to fwnode property API
led: triggers: Fix a memory leak bug
...
The cited commit introduced a double-free of the srq buffer in the error
flow of procedure __uverbs_create_xsrq().
The problem is that ib_destroy_srq_user() called in the error flow also
frees the srq buffer.
Thus, if uverbs_response() fails in __uverbs_create_srq(), the srq buffer
will be freed twice.
Cc: <stable@vger.kernel.org>
Fixes: 68e326dea1 ("RDMA: Handle SRQ allocations by IB/core")
Link: https://lore.kernel.org/r/20190916071154.20383-5-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The error print should indicate that it failed to get the queue
attributes, not network attributes.
Link: https://lore.kernel.org/r/20190910134301.4194-2-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_add_slave_port() allocates a multiport struct but never frees it.
Don't leak memory, free the allocated mpi struct during driver unload.
Cc: <stable@vger.kernel.org>
Fixes: 32f69e4be2 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Link: https://lore.kernel.org/r/20190916064818.19823-3-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The removal of 'buffer' in the patch below caused free_page() to use a
value that had been offset since the wqe pointer is adjusted while the
routine runs.
The current implementation of free_pages() rounds down to a pfn,
discarding the adjustment, but this is not the right way to use the
API. Preserve the initial value and use it for free_page().
Fixes: 0f51427bd0 ("RDMA/mlx5: Cleanup WQE page fault handler")
Link: https://lore.kernel.org/r/20190916064818.19823-2-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a spelling mistake in a literal string, fix it.
Fixes: 89f81008ba ("RDMA/bnxt_re: expose detailed stats retrieved from HW")
Link: https://lore.kernel.org/r/20190911092856.11146-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Here packages the codes of allocating and freeing rq inline buffer in
hns_roce_create_qp_common function in order to reduce the complexity.
Link: https://lore.kernel.org/r/1567068102-56919-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are two modes for mailbox command (cmd) queue, i.e., event mode and
poll mode. For each mode, we use corresponding semaphores to protect the
cmd queue resource competition, so called event_sem and poll_sem. During
cmd init, both semaphores are initialized and poll mode is selected.
Thus, there is no need to up poll_sema again in cmd_use_polling.
Furthermore, there is no need to down the sema of the other side while
switching mode. This patch aims to decouple the switch between event mode
and poll mode of cmd.
Link: https://lore.kernel.org/r/1567068102-56919-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds a counter for credit waits to assist field debugging.
Link: https://lore.kernel.org/r/20190911113047.126040.10857.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds traces to debug packet loss and retry for TID RDMA READ
protocol.
Link: https://lore.kernel.org/r/20190911113041.126040.64541.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the transmit path is never executed in an atomic context, we do not
need kmap_atomic() and can always use less demanding kmap().
Link: https://lore.kernel.org/r/20190909132945.30462-1-bmt@zurich.ibm.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
To resolve dependencies in following patches
mlx5_ib.h conflict resolved by keeing both hunks
Linux 5.3-rc8
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Maximum supported IO size is 8MB for the iSER driver. The current value is
limited by the ISCSI_ISER_MAX_SG_TABLESIZE macro. But the driver is able
to handle 16MB IOs without any significant changes. Increasing this limit
can be useful for the storage arrays which are fine tuned for IOs larger
than 8 MB.
This commit allows to configure maximum IO size up to 16MB using the
max_sectors module parameter.
Link: https://lore.kernel.org/r/20190912103534.18210-1-sergeygo@mellanox.com
Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use the correct kmap()/kunmap() flow to determine page address used for
CRC computation. Using page_address() is wrong, since page might be in
highmem.
Fixes: b9be6f18cf ("rdma/siw: transmit path")
Link: https://lore.kernel.org/r/20190909132427.30264-1-bmt@zurich.ibm.com
Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In bnxt_re_create_srq(), when ib_copy_to_udata() fails allocated memory
should be released by goto fail.
Fixes: 37cb11acf1 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Link: https://lore.kernel.org/r/20190910222120.16517-1-navid.emamdoost@gmail.com
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It's never a good idea to put a 1000-byte buffer on the kernel stack. The
compiler warns about this instance when usnic_ib_log_vf() gets inlined
into usnic_ib_pci_probe():
drivers/infiniband/hw/usnic/usnic_ib_main.c:543:12: error: stack frame size of 1044 bytes in function 'usnic_ib_pci_probe' [-Werror,-Wframe-larger-than=]
As this is only called for debugging purposes in the setup path, it's
trivial to convert to a dynamic allocation.
Link: https://lore.kernel.org/r/20190906155730.2750200-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
length is a size_t which is unsigned int on 32 bit:
../drivers/infiniband/core/umem_odp.c: In function 'ib_init_umem_odp':
../include/linux/overflow.h:59:15: warning: comparison of distinct pointer types lacks a cast
59 | (void) (&__a == &__b); \
| ^~
../drivers/infiniband/core/umem_odp.c:220:7: note: in expansion of macro 'check_add_overflow'
Fixes: 204e3e5630 ("RDMA/odp: Check for overflow when computing the umem_odp end")
Link: https://lore.kernel.org/r/20190908080726.30017-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use devm_platform_ioremap_resource() to simplify the code a bit. This is
detected by coccinelle.
Link: https://lore.kernel.org/r/20190906141727.26552-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In addr_handler(), assuming status == 0 and the device already has been
acquired (id_priv->cma_dev != NULL), we get the following incorrect
"error" message:
RDMA CM: ADDR_ERROR: failed to resolve IP. status 0
Fixes: 498683c6a7 ("IB/cma: Add debug messages to error flows")
Link: https://lore.kernel.org/r/20190902092731.1055757-1-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Abstract:
--------
Mellanox ConnetX devices supports packet matching, packet modification and
redirection. These functionalities are also referred to as flow-steering.
To configure a steering rule, the rule is written to the device owned
memory, this memory is accessed and cached by the device when processing
a packet.
Steering rules are constructed from multiple steering entries (STE).
Rules are configured using the Firmware command interface. The Firmware
processes the given driver command and translates them to STEs, then
writes them to the device memory in the current steering tables.
This process is slow due to the architecture of the command interface and
the processing complexity of each rule.
The highlight of this patchset is to cut the middle man (The firmware) and
do steering rules programming into device directly from the driver, with
no firmware intervention whatsoever.
Motivation:
-----------
Software (driver managed) steering allows for high rule insertion rates
compared to the FW steering described above, this is achieved by using
internal RDMA writes to the device owned memory instead of the slow
command interface to program steering rules.
Software (driver managed) steering, doesn't depend on new FW
for new steering functionality, new implementations can be done in the
driver skipping the FW layer.
Performance:
------------
The insertion rate on a single core using the new approach allows
programming ~300K rules per sec. (Done via direct raw test to the new mlx5
sw steering layer, without any kernel layer involved).
Test: TC L2 rules
33K/s with Software steering (this patchset).
5K/s with FW and current driver.
This will improve OVS based solution performance.
Architecture and implementation details:
----------------------------------------
Software steering will be dynamically selected via devlink device
parameter. Example:
$ devlink dev param show pci/0000:06:00.0 name flow_steering_mode
pci/0000:06:00.0:
name flow_steering_mode type driver-specific
values:
cmode runtime value smfs
mlx5 software steering module a.k.a (DR - Direct Rule) is implemented
and contained in mlx5/core/steering directory and controlled by
MLX5_SW_STEERING kconfig flag.
mlx5 core steering layer (fs_core) already provides a shim layer for
implementing different steering mechanisms, software steering will
leverage that as seen at the end of this series.
When Software Steering for a specific steering domain
(NIC/RDMA/Vport/ESwitch, etc ..) is supported, it will cause rules
targeting this domain to be created using SW steering instead of FW.
The implementation includes:
Domain - The steering domain is the object that all other object resides
in. It holds the memory allocator, send engine, locks and other shared
data needed by lower objects such as table, matcher, rule, action.
Each domain can contain multiple tables. Domain is equivalent to
namespaces e.g (NIC/RDMA/Vport/ESwitch, etc ..) as implemented
currently in mlx5_core fs_core (flow steering core).
Table - Table objects are used for holding multiple matchers, each table
has a level used to prevent processing loops. Packets are being
directed to this table once it is set as the root table, this is done
by fs_core using a FW command. A packet is being processed inside the
table matcher by matcher until a successful hit, otherwise the packet
will perform the default action.
Matcher - Matchers objects are used to specify the fields mask for
matching when processing a packet. A matcher belongs to a table, each
matcher can hold multiple rules, each rule with different matching
values corresponding to the matcher mask. Each matcher has a priority
used for rule processing order inside the table.
Action - Action objects are created to specify different steering actions
such as count, reformat (encapsulate, decapsulate, ...), modify
header, forward to table and many other actions. When creating a rule
a sequence of actions can be provided to be executed on a successful
match.
Rule - Rule objects are used to specify a specific match on packets as
well as the actions that should be executed. A rule belongs to a
matcher.
STE - This layer is used to hold the specific STE format for the device
and to convert the requested rule to STEs. Each rule is constructed of
an STE chain, Multiple rules construct a steering graph. Each node in
the graph is a hash table containing multiple STEs. The index of each
STE in the hash table is being calculated using a CRC32 hash function.
Memory pool - Used for managing and caching device owned memory for rule
insertion. The memory is being allocated using DM (device memory) API.
Communication with device - layer for standard RDMA operation using RC QP
to configure the device steering.
Command utility - This module holds all of the FW commands that are
required for SW steering to function.
Patch planning and files:
-------------------------
1) First patch, adds the support to Add flow steering actions to fs_cmd
shim layer.
2) Next 12 patch will add a file per each Software steering
functionality/module as described above. (See patches with title: DR, *)
3) Add CONFIG_MLX5_SW_STEERING for software steering support and enable
build with the new files
4) Next two patches will add the support for software steering in mlx5
steering shim layer
net/mlx5: Add API to set the namespace steering mode
net/mlx5: Add direct rule fs_cmd implementation
5) Last two patches will add the new devlink parameter to select mlx5
steering mode, will be valid only for switchdev mode for now.
Two modes are supported:
1. DMFS - Device managed flow steering
2. SMFS - Software/Driver managed flow steering.
In the DMFS mode, the HW steering entities are created through the
FW. In the SMFS mode this entities are created though the driver
directly.
The driver will use the devlink steering mode only if the steering
domain supports it, for now SMFS will manages only the switchdev
eswitch steering domain.
User command examples:
- Set SMFS flow steering mode::
$ devlink dev param set pci/0000:06:00.0 name flow_steering_mode value "smfs" cmode runtime
- Read device flow steering mode::
$ devlink dev param show pci/0000:06:00.0 name flow_steering_mode
pci/0000:06:00.0:
name flow_steering_mode type driver-specific
values:
cmode runtime value smfs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl1uxPAACgkQSD+KveBX
+j5AkggAymoYqG2G+s8cLa4vQFySaD1Td3VzzWglp7PlpDBE3UcSoMAMg/gIDU1D
8F04PeCsJ6snt1ICk56vPNyAEHWfWeBUd56+QK5lEJBuwozyFvBh6HP81Bnr6T/n
n6uTx45ljAFQPTHJjEOLBPSzEXecLu07+mvpzSoW0F3ehfGbELhL1IkVobr/RELx
z4xZW9uM2vm5ylheWvjf4V1S/SvokgJazW9+4fh//rl8tfXgun5IfPoS0hqKie1/
h5sjcMSYkYR4gLVqrhKmBYHmHVl/h0TYROckW8iC/+XX7ailSo9uPG7lPa6cm+GE
7Bajlbz4oD/K5RWoByo+q+dmyjeVhQ==
=M9bS
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2019-09-01-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2019-09-01 (Software steering support)
Abstract:
--------
Mellanox ConnetX devices supports packet matching, packet modification and
redirection. These functionalities are also referred to as flow-steering.
To configure a steering rule, the rule is written to the device owned
memory, this memory is accessed and cached by the device when processing
a packet.
Steering rules are constructed from multiple steering entries (STE).
Rules are configured using the Firmware command interface. The Firmware
processes the given driver command and translates them to STEs, then
writes them to the device memory in the current steering tables.
This process is slow due to the architecture of the command interface and
the processing complexity of each rule.
The highlight of this patchset is to cut the middle man (The firmware) and
do steering rules programming into device directly from the driver, with
no firmware intervention whatsoever.
Motivation:
-----------
Software (driver managed) steering allows for high rule insertion rates
compared to the FW steering described above, this is achieved by using
internal RDMA writes to the device owned memory instead of the slow
command interface to program steering rules.
Software (driver managed) steering, doesn't depend on new FW
for new steering functionality, new implementations can be done in the
driver skipping the FW layer.
Performance:
------------
The insertion rate on a single core using the new approach allows
programming ~300K rules per sec. (Done via direct raw test to the new mlx5
sw steering layer, without any kernel layer involved).
Test: TC L2 rules
33K/s with Software steering (this patchset).
5K/s with FW and current driver.
This will improve OVS based solution performance.
Architecture and implementation details:
----------------------------------------
Software steering will be dynamically selected via devlink device
parameter. Example:
$ devlink dev param show pci/0000:06:00.0 name flow_steering_mode
pci/0000:06:00.0:
name flow_steering_mode type driver-specific
values:
cmode runtime value smfs
mlx5 software steering module a.k.a (DR - Direct Rule) is implemented
and contained in mlx5/core/steering directory and controlled by
MLX5_SW_STEERING kconfig flag.
mlx5 core steering layer (fs_core) already provides a shim layer for
implementing different steering mechanisms, software steering will
leverage that as seen at the end of this series.
When Software Steering for a specific steering domain
(NIC/RDMA/Vport/ESwitch, etc ..) is supported, it will cause rules
targeting this domain to be created using SW steering instead of FW.
The implementation includes:
Domain - The steering domain is the object that all other object resides
in. It holds the memory allocator, send engine, locks and other shared
data needed by lower objects such as table, matcher, rule, action.
Each domain can contain multiple tables. Domain is equivalent to
namespaces e.g (NIC/RDMA/Vport/ESwitch, etc ..) as implemented
currently in mlx5_core fs_core (flow steering core).
Table - Table objects are used for holding multiple matchers, each table
has a level used to prevent processing loops. Packets are being
directed to this table once it is set as the root table, this is done
by fs_core using a FW command. A packet is being processed inside the
table matcher by matcher until a successful hit, otherwise the packet
will perform the default action.
Matcher - Matchers objects are used to specify the fields mask for
matching when processing a packet. A matcher belongs to a table, each
matcher can hold multiple rules, each rule with different matching
values corresponding to the matcher mask. Each matcher has a priority
used for rule processing order inside the table.
Action - Action objects are created to specify different steering actions
such as count, reformat (encapsulate, decapsulate, ...), modify
header, forward to table and many other actions. When creating a rule
a sequence of actions can be provided to be executed on a successful
match.
Rule - Rule objects are used to specify a specific match on packets as
well as the actions that should be executed. A rule belongs to a
matcher.
STE - This layer is used to hold the specific STE format for the device
and to convert the requested rule to STEs. Each rule is constructed of
an STE chain, Multiple rules construct a steering graph. Each node in
the graph is a hash table containing multiple STEs. The index of each
STE in the hash table is being calculated using a CRC32 hash function.
Memory pool - Used for managing and caching device owned memory for rule
insertion. The memory is being allocated using DM (device memory) API.
Communication with device - layer for standard RDMA operation using RC QP
to configure the device steering.
Command utility - This module holds all of the FW commands that are
required for SW steering to function.
Patch planning and files:
-------------------------
1) First patch, adds the support to Add flow steering actions to fs_cmd
shim layer.
2) Next 12 patch will add a file per each Software steering
functionality/module as described above. (See patches with title: DR, *)
3) Add CONFIG_MLX5_SW_STEERING for software steering support and enable
build with the new files
4) Next two patches will add the support for software steering in mlx5
steering shim layer
net/mlx5: Add API to set the namespace steering mode
net/mlx5: Add direct rule fs_cmd implementation
5) Last two patches will add the new devlink parameter to select mlx5
steering mode, will be valid only for switchdev mode for now.
Two modes are supported:
1. DMFS - Device managed flow steering
2. SMFS - Software/Driver managed flow steering.
In the DMFS mode, the HW steering entities are created through the
FW. In the SMFS mode this entities are created though the driver
directly.
The driver will use the devlink steering mode only if the steering
domain supports it, for now SMFS will manages only the switchdev
eswitch steering domain.
User command examples:
- Set SMFS flow steering mode::
$ devlink dev param set pci/0000:06:00.0 name flow_steering_mode value "smfs" cmode runtime
- Read device flow steering mode::
$ devlink dev param show pci/0000:06:00.0 name flow_steering_mode
pci/0000:06:00.0:
name flow_steering_mode type driver-specific
values:
cmode runtime value smfs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add flow steering actions: modify header and packet reformat
to the fs_cmd shim layer. This allows each namespace to define
possibly different functionality for alloc/dealloc action commands.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Merge mlx5-next patches needed for upcoming mlx5 software steering.
1) Alex adds HW bits and definitions required for SW steering
2) Ariel moves device memory management to mlx5_core (From mlx5_ib)
3) Maor, Cleanups and fixups for eswitch mode and RoCE
4) Mark, Set only stag for match untagged packets
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Move the device memory allocation and deallocation commands
SW ICM memory to mlx5_core to expose this API for all
mlx5_core users.
This comes as preparation for supporting SW steering in kernel
where it will be required to allocate and register device
memory for direct rule insertion.
In addition, an API to register this device memory for future
remote access operations is introduced using the create_mkey
commands.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5 HW spec and bits updates:
1) Aya exposes IP-in-IP capability in mlx5_core.
2) Maxim exposes lag tx port affinity capabilities.
3) Moshe adds VNIC_ENV internal rq counter bits.
4) ODP capabilities for DC transport
Misc updates:
5) Saeed, two compiler warnings cleanups
6) Add XRQ legacy commands opcodes
7) Use refcount_t for refcount
8) fix a -Wstringop-truncation warning
We used wrong shifts when set qp_attr->qp_access_flag,
this patch exchange V2_QP_RRE_S and V2_QP_RWE_S to fix it.
Fixes: 2a3d923f87 ("RDMA/hns: Replace magic numbers with #defines")
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-10-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Delete the assignment of srq->ibsrq.ext.xrc.srq_num, beacause this
value is not used.
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-9-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Because if the value of srqwqe_buf_pg_sz is zero, npages and
ib_umem_page_count are equivalent, page_shif and PAGE_SHIFT
are equivalent in hns_roce_create_srq. Here remove it.
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-8-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the hardware is resetting, the driver should not perform
the mailbox operation.Function-clear needs to add relevant judgment.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-7-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sparse is whining about the u32 and __le32 mixed usage in the driver.
The roce_set_field() is used to __le32 data of hardware only.
If a variable is not delivered to the hardware, the __le32 type and
related operations are not required.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Link: https://lore.kernel.org/r/1566393276-42555-6-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Walking the address list of an inet6_dev requires
appropriate locking. Since the called function
siw_listen_address() may sleep, we have to use
rtnl_lock() instead of read_lock_bh().
Also introduces sanity checks if we got a device
from in_dev_get() or in6_dev_get().
Reported-by: Bart Van Assche <bvanassche@acm.org>
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190828130355.22830-1-bmt@zurich.ibm.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael Guralnik says:
====================
The series adds support for on-demand paging for DC transport.
As DC is a mlx-only transport, the capabilities are exposed to the user
using DEVX objects and later on through mlx5dv_query_device.
====================
Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies
* branch 'mlx5-odp-dc':
IB/mlx5: Add page fault handler for DC initiator WQE
IB/mlx5: Remove check of FW capabilities in ODP page fault handling
net/mlx5: Set ODP capabilities for DC transport to max
Parsing DC initiator WQEs upon page fault requires skipping an address
vector segment, as in UD WQEs.
Link: https://lore.kernel.org/r/20190819120815.21225-4-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As page fault handling is initiated by FW, there is no need to check that
the ODP supports the operation and transport.
Link: https://lore.kernel.org/r/20190819120815.21225-3-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The dev_kfree_skb() function performs also input parameter validation.
Thus the test around the shown calls is not needed.
This issue was detected by using the Coccinelle software.
Link: https://lore.kernel.org/r/16df4c50-1f61-d7c4-3fc8-3073666d281d@web.de
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use FIELD_SIZEOF macro instead of hard coding it in field_avail macro.
Link: https://lore.kernel.org/r/20190826115350.21718-3-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
EFA driver is not a kverbs provider, the check for MR umem is redundant.
Link: https://lore.kernel.org/r/20190826115350.21718-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently user applications can only steer TCP/IP(NIC RX/RX) traffic.
This patch adds RDMA_RX as a new flow type to allow the user to insert
steering rules to control RDMA traffic.
Two destinations are supported(but not set at the same time): devx
flow table object and QP.
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190819113626.20284-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
All user level and most in-kernel applications submit WQEs
where the SG list entries are all of a single type.
iSER in particular, however, will send us WQEs with mixed SG
types: sge[0] = kernel buffer, sge[1] = PBL region.
Check and set is_kva on each SG entry individually instead of
assuming the first SGE type carries through to the last.
This fixes iSER over siw.
Fixes: b9be6f18cf ("rdma/siw: transmit path")
Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Tested-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190822150741.21871-1-bmt@zurich.ibm.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
At this point the ucontext is only being stored to access the ib_device,
so just store the ib_device directly instead. This is more natural and
logical as the umem has nothing to do with the ucontext.
Link: https://lore.kernel.org/r/20190806231548.25242-8-jgg@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is a significant simplification, no extra list is kept per FD, and
the interval tree is now shared between all the ucontexts, reducing
overhead if there are multiple ucontexts active.
Link: https://lore.kernel.org/r/20190806231548.25242-7-jgg@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe says:
====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================
The branch is based on v5.3-rc5 due to dependencies
* odp_fixes:
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
RDMA/core: Make invalidate_range a device operation
RDMA/odp: Use kvcalloc for the dma_list and page_list
RDMA/odp: Check for overflow when computing the umem_odp end
RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
RDMA/odp: Split creating a umem_odp from ib_umem_get
RDMA/odp: Make the three ways to create a umem_odp clear
RMDA/odp: Consolidate umem_odp initialization
RDMA/odp: Make it clearer when a umem is an implicit ODP umem
RDMA/odp: Iterate over the whole rbtree directly
RDMA/odp: Use the common interval tree library instead of generic
RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These are the same thing since mr always comes from odp->private. It is
confusing to reference the same memory via two names.
Link: https://lore.kernel.org/r/20190819111710.18440-13-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These are subtly different, the address is the original VA requested
during umem_get, while ib_umem_start() is the version that is rounded to
the proper page size, ie is the true start of the umem's dma map.
Link: https://lore.kernel.org/r/20190819111710.18440-12-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The callback function 'invalidate_range' is implemented in a driver so the
place for it is in the ib_device_ops structure and not in ib_ucontext.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Link: https://lore.kernel.org/r/20190819111710.18440-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no specific need for these to be in the valloc space, let the
system decide automatically how to do the allocation.
Link: https://lore.kernel.org/r/20190819111710.18440-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the page size can be extended in the ODP case by IB_ACCESS_HUGETLB
the existing overflow checks done by ib_umem_get() are not
sufficient. Check for overflow again.
Further, remove the unchecked math from the inlines and just use the
precomputed value stored in the interval_tree_node.
Link: https://lore.kernel.org/r/20190819111710.18440-9-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that there are allocator APIs that return the ib_umem_odp directly
it should be freed through a umem_odp free'er as well.
Link: https://lore.kernel.org/r/20190819111710.18440-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is the last creation API that is overloaded for both, there is very
little code sharing and a driver has to be specifically ready for a
umem_odp to be created to use the odp version.
Link: https://lore.kernel.org/r/20190819111710.18440-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The three paths to build the umem_odps are kind of muddled, they are:
- As a normal ib_mr umem
- As a child in an implicit ODP umem tree
- As the root of an implicit ODP umem tree
Only the first two are actually umem's, the last is an abuse.
The implicit case can only be triggered by explicit driver request, it
should never be co-mingled with the normal case. While we are here, make
sensible function names and add some comments to make this clearer.
Link: https://lore.kernel.org/r/20190819111710.18440-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is done in two different places, consolidate all the post-allocation
initialization into a single function.
Link: https://lore.kernel.org/r/20190819111710.18440-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Implicit ODP umems are special, they don't have any page lists, they don't
exist in the interval tree and they are never DMA mapped.
Instead of trying to guess this based on a zero length use an explicit
flag.
Further, do not allow non-implicit umems to be 0 size.
Link: https://lore.kernel.org/r/20190819111710.18440-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of intersecting a full interval, just iterate over every element
directly. This is faster and clearer.
Link: https://lore.kernel.org/r/20190819111710.18440-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ODP is working with userspace VA's in the interval tree which always fit
into an unsigned long, so we can use the common code.
This comes at a cost of a 16 byte increase in ib_umem_odp struct size due
to storing the interval tree start/last in addition to the umem
addr/length. However these values were computed and are performance
critical for the interval lookup, so this seems like a worthwhile trade
off.
Removes 2k of .text from the kernel.
Link: https://lore.kernel.org/r/20190819111710.18440-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In fault_opcodes_write(), 'data' is allocated through kcalloc(). However,
it is not deallocated in the following execution if an error occurs,
leading to memory leaks. To fix this issue, introduce the 'free_data' label
to free 'data' before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/1566154486-3713-1-git-send-email-wenwen@cs.uga.edu
Signed-off-by: Doug Ledford <dledford@redhat.com>
In fault_opcodes_read(), 'data' is not deallocated if debugfs_file_get()
fails, leading to a memory leak. To fix this bug, introduce the 'free_data'
label to free 'data' before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/1566156571-4335-1-git-send-email-wenwen@cs.uga.edu
Signed-off-by: Doug Ledford <dledford@redhat.com>
In mlx4_ib_alloc_pv_bufs(), 'tun_qp->tx_ring' is allocated through
kcalloc(). However, it is not always deallocated in the following execution
if an error occurs, leading to memory leaks. To fix this issue, free
'tun_qp->tx_ring' whenever an error occurs.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/1566159781-4642-1-git-send-email-wenwen@cs.uga.edu
Signed-off-by: Doug Ledford <dledford@redhat.com>
In cma_init, if cma_configfs_init fails, need to free the
previously memory and return fail, otherwise will trigger
null-ptr-deref Read in cma_cleanup.
cma_cleanup
cma_configfs_exit
configfs_unregister_subsystem
Fixes: 045959db65 ("IB/cma: Add configfs for rdma_cm")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Link: https://lore.kernel.org/r/1566188859-103051-1-git-send-email-zhengbin13@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Check conditions that are mandatory to post_send UMR WQEs.
1. Modifying page size.
2. Modifying remote atomic permissions if atomic access is required.
If either condition is not fulfilled then fail to post_send() flow.
Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-9-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
The UMR WQE in the MR re-registration flow requires that
modify_atomic and modify_entity_size capabilities are enabled.
Therefore, check that the these capabilities are present before going to
umr flow and go through slow path if not.
Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-8-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
ODP depends on the several device capabilities, among them is the ability
to send UMR WQEs with that modify atomic and entity size of the MR.
Therefore, only if all conditions to send such a UMR WQE are met then
driver can report that ODP is supported. Use this check of conditions
in all places where driver needs to know about ODP support.
Also, implicit ODP support depends on ability of driver to send UMR WQEs
for an indirect mkey. Therefore, verify that all conditions to do so are
met when reporting support.
Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-7-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Introduce helper function to unify various use_umr checks.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-6-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
task_active_pid_ns() is wrong API to check PID namespace because it
posses some restrictions and return PID namespace where the process
was allocated. It created mismatches with current namespace, which
can be different.
Rewrite whole rdma_is_visible_in_pid_ns() logic to provide reliable
results without any relation to allocated PID namespace.
Fixes: 8be565e65f ("RDMA/nldev: Factor out the PID namespace check")
Fixes: 6a6c306a09 ("RDMA/restrack: Make is_visible_in_pid_ns() as an API")
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
"Auto" configuration mode is called for visible in that PID
namespace and it ensures that all counters and QPs are coexist
in the same namespace and belong to same PID.
Fixes: 99fa331dc8 ("RDMA/counter: Add "auto" configuration mode support")
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
packets could be delivered out of order. A stale TID RDMA data packet
could lead to TidErr if the TID entries have been released by duplicate
data packets generated from retries, and subsequently erroneously force
the qp into error state in the current implementation.
Since the payload has already been dropped by hardware, the packet can
be simply dropped and it is no longer necessary to put the qp into
error state.
Fixes: 9905bf06e8 ("IB/hfi1: Add functions to receive TID RDMA READ response")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192058.105923.72324.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
packets could be delivered out of order, which could cause incorrect
processing of stale packets. For stale TID RDMA WRITE DATA packets that
cause KDETH EFLAGS errors, this patch adds additional checks before
processing the packets.
Fixes: d72fe7d500 ("IB/hfi1: Add a function to receive TID RDMA WRITE DATA packet")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192051.105923.69979.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
packets could be delivered out of order, which could cause incorrect
processing of stale packets. For stale TID RDMA READ RESP packets that
cause KDETH EFLAGS errors, this patch adds additional checks before
processing the packets.
Fixes: 9905bf06e8 ("IB/hfi1: Add functions to receive TID RDMA READ response")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192045.105923.59813.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When processing a TID RDMA READ RESP packet that causes KDETH EFLAGS
errors, the packet's IB PSN is checked against qp->s_last_psn and
qp->s_psn without the protection of qp->s_lock, which is not safe.
This patch fixes the issue by acquiring qp->s_lock first.
Fixes: 9905bf06e8 ("IB/hfi1: Add functions to receive TID RDMA READ response")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192039.105923.7852.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
the sender could receive stale TID RDMA NAK packets that contain newer
KDETH PSNs and older Verbs PSNs. If not dropped, these packets could
cause the incorrect rewinding of the software flows and the incorrect
completion of TID RDMA WRITE requests, and eventually leading to memory
corruption and kernel crash.
The current code drops stale TID RDMA ACK/NAK packets solely based
on KDETH PSNs, which may lead to erroneous processing. This patch
fixes the issue by also checking the Verbs PSN. Addition checks are
added before rewinding the TID RDMA WRITE DATA packets.
Fixes: 9e93e967f7 ("IB/hfi1: Add a function to receive TID RDMA ACK packet")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192033.105923.44192.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In siw_connect() we have an error flow where there is no valid qp
pointer. Make sure we don't try to de-ref in that situation.
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190819140257.19319-1-bmt@zurich.ibm.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When ODP is enabled with IB_ACCESS_HUGETLB then the required pages
should be calculated based on the extent of the MR, which is rounded
to the nearest huge page alignment.
Fixes: d2183c6f19 ("RDMA/umem: Move page_shift from ib_umem to ib_odp_umem")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-5-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
kasan will report a BUG when run command 'insmod hns_roce_hw_v2.ko', the
calltrace is as follows:
==================================================================
BUG: KASAN: slab-out-of-bounds in hns_roce_v2_init_eq_table+0x1324/0x1948
[hns_roce_hw_v2]
Read of size 8 at addr ffff8020e7a10608 by task insmod/256
CPU: 0 PID: 256 Comm: insmod Tainted: G O 5.2.0-rc4 #1
Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xc4/0xfc
print_address_description+0x60/0x270
__kasan_report+0x164/0x1b8
kasan_report+0xc/0x18
__asan_load8+0x84/0xa8
hns_roce_v2_init_eq_table+0x1324/0x1948 [hns_roce_hw_v2]
hns_roce_init+0xf8/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
hns_roce_hw_v2_init+0x14/0x10000 [hns_roce_hw_v2]
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Allocated by task 256:
__kasan_kmalloc.isra.0+0xd0/0x180
kasan_kmalloc+0xc/0x18
__kmalloc+0x16c/0x328
hns_roce_v2_init_eq_table+0x764/0x1948 [hns_roce_hw_v2]
hns_roce_init+0xf8/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
hns_roce_hw_v2_init+0x14/0x10000 [hns_roce_hw_v2]
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff8020e7a10600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffff8020e7a10600, ffff8020e7a10680)
The buggy address belongs to the page:
page:ffff7fe00839e840 refcount:1 mapcount:0 mapping:ffff802340020200 index:0x0
flags: 0x5fffe00000000200(slab)
raw: 5fffe00000000200 dead000000000100 dead000000000200 ffff802340020200
raw: 0000000000000000 0000000081000100 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8020e7a10500: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
ffff8020e7a10580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8020e7a10600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff8020e7a10680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8020e7a10700: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-7-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
kasan will report a BUG when run command 'rmmod hns_roce_hw_v2', the calltrace
is as follows:
==================================================================
BUG: KASAN: slab-out-of-bounds in hns_roce_table_mhop_put+0x584/0x828
[hns_roce]
Read of size 8 at addr ffff802185e08300 by task rmmod/270
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xc4/0xfc
print_address_description+0x60/0x270
__kasan_report+0x164/0x1b8
kasan_report+0xc/0x18
__asan_load8+0x84/0xa8
hns_roce_table_mhop_put+0x584/0x828 [hns_roce]
hns_roce_table_put+0x174/0x1a0 [hns_roce]
hns_roce_mr_free+0x124/0x210 [hns_roce]
hns_roce_dereg_mr+0x90/0xb8 [hns_roce]
ib_dealloc_pd_user+0x60/0xf0
ib_mad_port_close+0x128/0x1d8
ib_mad_remove_device+0x94/0x118
remove_client_context+0xa0/0xe0
disable_device+0xfc/0x1c0
__ib_unregister_device+0x60/0xe0
ib_unregister_device+0x24/0x38
hns_roce_exit+0x3c/0x138 [hns_roce]
__hns_roce_hw_v2_uninit_instance.isra.30+0x28/0x50 [hns_roce_hw_v2]
hns_roce_hw_v2_uninit_instance+0x44/0x60 [hns_roce_hw_v2]
hclge_uninit_client_instance+0x15c/0x238 [hclge]
hnae3_uninit_client_instance+0x84/0xa8 [hnae3]
hnae3_unregister_client+0x84/0x158 [hnae3]
hns_roce_hw_v2_exit+0x14/0x20 [hns_roce_hw_v2]
__arm64_sys_delete_module+0x20c/0x308
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Allocated by task 255:
__kasan_kmalloc.isra.0+0xd0/0x180
kasan_kmalloc+0xc/0x18
__kmalloc+0x16c/0x328
hns_roce_init_hem_table+0x20c/0x428 [hns_roce]
hns_roce_init+0x214/0xfe0 [hns_roce]
__hns_roce_hw_v2_init_instance+0x284/0x330 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0xd0/0x1b8 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x180/0x310 [hclge]
hclge_init_client_instance+0xcc/0x508 [hclge]
hnae3_init_client_instance.part.3+0x3c/0x80 [hnae3]
hnae3_register_client+0x134/0x1a8 [hnae3]
0xffff200009c00014
do_one_initcall+0x9c/0x3e0
do_init_module+0xd4/0x2d8
load_module+0x3284/0x3690
__se_sys_init_module+0x274/0x308
__arm64_sys_init_module+0x40/0x50
el0_svc_handler+0xbc/0x210
el0_svc+0x8/0xc
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff802185e06300
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 0 bytes to the right of
8192-byte region [ffff802185e06300, ffff802185e08300)
The buggy address belongs to the page:
page:ffff7fe008617800 refcount:1 mapcount:0 mapping:ffff802340020e00 index:0x0
compound_mapcount: 0
flags: 0x5fffe00000010200(slab|head)
raw: 5fffe00000010200 dead000000000100 dead000000000200 ffff802340020e00
raw: 0000000000000000 00000000803e003e 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff802185e08200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff802185e08280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff802185e08300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff802185e08380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff802185e08400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Disabling lock debugging due to kernel taint
Fixes: a25d13cbe8 ("RDMA/hns: Add the interfaces to support multi hop addressing for the contexts in hip08")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-6-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When exiting "for loop", the actual value of pi will be
increased by 1, which is compatible with the next calculation.
But when pi is equal to "ci + hr_cq-> ib_cq.cqe", the "break"
was called and the pi is actual value, it will lead one cqe
still existing, so the "==" should be modify to ">".
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-5-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When create a qp and attached to srq, rq will no longer be used
and the members of rq will be set zero. As a result, the wrid
of rq will not be allocated and used.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565343666-73193-3-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
We should set IB_WC_WITH_VLAN only when VLAN is enabled.
In addition, move setting of IB_WC_WITH_SMAC below
setting of wc->smac.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1565343666-73193-2-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
NULL-ing notifier_call is performed under protection
of mlx5_ib_multiport_mutex lock. Such protection is
not easily spotted and better to be guarded by lockdep
annotation.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190813102814.22350-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add two events that were defined in the device specification but were
not exposed in the driver list.
Post this patch those events can be read over the DEVX events interface
once be reported by the firmware.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Edward Srouji <edwards@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190808084358.29517-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch changes the driver/user shared (mmapped) CQ notification
flags field from unsigned 64-bits size to unsigned 32-bits size. This
enables building siw on 32-bit architectures.
This patch changes the siw-abi, but as siw was only just merged in
this merge window cycle, there are no released kernels with the prior
abi. We are making no attempt to be binary compatible with siw user
space libraries prior to the merge of siw into the upstream kernel,
only moving forward with upstream kernels and upstream rdma-core
provided siw libraries are we guaranteeing compatibility.
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190809151816.13018-1-bmt@zurich.ibm.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Merging tip of mlx5-next in order to get changes related to adding
XRQ support to the DEVX interface needed prior to the following two
patches.
Signed-off-by: Doug Ledford <dledford@redhat.com>
We need to set the error codes on these paths. Currently the only
possible error code is -EMSGSIZE so that's what the patch uses.
Fixes: 83c2c1fcbd ("RDMA/nldev: Allow get counter mode through RDMA netlink")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190809101311.GA17867@mwanda
Signed-off-by: Doug Ledford <dledford@redhat.com>
The error handling code doesn't free siw_cpu_info.tx_valid_cpus[0]. The
first iteration through the loop is a no-op so this is sort of an off
by one bug. Also Bernard pointed out that we can remove the NULL
assignment and simplify the code a bit.
Fixes: bdcf26bf9b ("rdma/siw: network and RDMA core interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190809140904.GB3552@mwanda
Signed-off-by: Doug Ledford <dledford@redhat.com>
If we enabled alw_lcl_lpbk in promiscuous mode, packet whose source
and destination mac address is equal will be handled in both inner
loopback and outer loopback. This will halve performance of roce in
promiscuous mode.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1565276034-97329-14-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Current prompt message is uncorrect when destroying qp, add qpn
information when creating qp.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-4-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
It needs to check the sq size with integrity when configures
the relatived parameters of sq. Here moves the relatived code
into a special function.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-2-git-send-email-oulijun@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Now that we have a common iWARP query port function we can remove the
common code from the iWARP drivers.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://lore.kernel.org/r/20190807103138.17219-5-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support for a common iWARP query port function, the new function
includes a common code that is used by the iWARP devices to update the
port attributes like max_mtu, active_mtu, state, and phys_state, the
function also includes a call for the driver-specific query_port callback
to query the device-specific port attributes.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Link: https://lore.kernel.org/r/20190807103138.17219-4-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
This change is required to associate the cxgb3 ib_dev with the
underlying net_device, so in the upcoming patch we can call
ib_device_get_netdev().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Link: https://lore.kernel.org/r/20190807103138.17219-3-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to improve readability, add ib_port_phys_state enum to replace
the use of magic numbers.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Andrew Boyer <aboyer@tobark.org>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190807103138.17219-2-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In case of rdma_counter_init() fails, counter allocation and QP bind
should not be allowed.
Fixes: 413d334750 ("RDMA/counter: Add set/clear per-port auto mode support")
Fixes: 1bd8e0a9d0 ("RDMA/counter: Allow manual mode configuration support")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190807101819.7581-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Once implicit MR is being called to be released by
ib_umem_notifier_release() its leaves were marked as "dying".
However, when dereg_mr()->mlx5_ib_free_implicit_mr()->mr_leaf_free() is
called, it skips running the mr_leaf_free_action (i.e. umem_odp->work)
when those leaves were marked as "dying".
As such ib_umem_release() for the leaves won't be called and their MRs
will be leaked as well.
When an application exits/killed without calling dereg_mr we might hit the
above flow.
This fatal scenario is reported by WARN_ON() upon
mlx5_ib_dealloc_ucontext() as ibcontext->per_mm_list is not empty, the
call trace can be seen below.
Originally the "dying" mark as part of ib_umem_notifier_release() was
introduced to prevent pagefault_mr() from returning a success response
once this happened. However, we already have today the completion
mechanism so no need for that in those flows any more. Even in case a
success response will be returned the firmware will not find the pages and
an error will be returned in the following call as a released mm will
cause ib_umem_odp_map_dma_pages() to permanently fail mmget_not_zero().
Fix the above issue by dropping the "dying" from the above flows. The
other flows that are using "dying" are still needed it for their
synchronization purposes.
WARNING: CPU: 1 PID: 7218 at
drivers/infiniband/hw/mlx5/main.c:2004
mlx5_ib_dealloc_ucontext+0x84/0x90 [mlx5_ib]
CPU: 1 PID: 7218 Comm: ibv_rc_pingpong Tainted: G E
5.2.0-rc6+ #13
Call Trace:
uverbs_destroy_ufile_hw+0xb5/0x120 [ib_uverbs]
ib_uverbs_close+0x1f/0x80 [ib_uverbs]
__fput+0xbe/0x250
task_work_run+0x88/0xa0
do_exit+0x2cb/0xc30
? __fput+0x14b/0x250
do_group_exit+0x39/0xb0
get_signal+0x191/0x920
? _raw_spin_unlock_bh+0xa/0x20
? inet_csk_accept+0x229/0x2f0
do_signal+0x36/0x5e0
? put_unused_fd+0x5b/0x70
? __sys_accept4+0x1a6/0x1e0
? inet_hash+0x35/0x40
? release_sock+0x43/0x90
? _raw_spin_unlock_bh+0xa/0x20
? inet_listen+0x9f/0x120
exit_to_usermode_loop+0x5c/0xc6
do_syscall_64+0x182/0x1b0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20190805083010.21777-1-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reference counters are preferred to use refcount_t instead of
atomic_t.
This is because the implementation of refcount_t can prevent
overflows and detect possible use-after-free.
So convert atomic_t ref counters to refcount_t.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Admin queue error prints should never happen unless something wrong
happened to the device. However, in the unfortunate case that it does,
we should take extra care not to flood the log with error messages.
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Link: https://lore.kernel.org/r/20190801171447.54440-3-galpress@amazon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
UAR in CQ is not used and generates the following compilation
warning, clean the code by removing uar assignment.
drivers/infiniband/hw/hns/hns_roce_cq.c: In function _create_user_cq_:
drivers/infiniband/hw/hns/hns_roce_cq.c:305:27: warning: parameter _uar_ set but not used [-Wunused-but-set-parameter]
305 | struct hns_roce_uar *uar,
| ~~~~~~~~~~~~~~~~~~~~~^~~
Fixes: 4f8f0d5e33 ("RDMA/hns: Package the flow of creating cq")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801114827.24263-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Send and Receive completion is handled on a single CPU selected at
the time each Completion Queue is allocated. Typically this is when
an initiator instantiates an RDMA transport, or when a target
accepts an RDMA connection.
Some ULPs cannot open a connection per CPU to spread completion
workload across available CPUs and MSI vectors. For such ULPs,
provide an API that allows the RDMA core to select a completion
vector based on the device's complement of available comp_vecs.
ULPs that invoke ib_alloc_cq() with only comp_vector 0 are converted
to use the new API so that their completion workloads interfere less
with each other.
Suggested-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Cc: <linux-cifs@vger.kernel.org>
Cc: <v9fs-developer@lists.sourceforge.net>
Link: https://lore.kernel.org/r/20190729171923.13428.52555.stgit@manet.1015granger.net
Signed-off-by: Doug Ledford <dledford@redhat.com>
The "MLX5_CMD_OP_QUERY_LAG" is one of the DEVX general commands, add it.
Fixes: 8aa8c95ce4 ("IB/mlx5: Add support for DEVX general command")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Fix to return error code -ENOMEM from the rdma_zalloc_drv_obj() error
handling case instead of 0, as done elsewhere in this function.
Fixes: e8ac9389f0 ("RDMA: Fix allocation failure on pointer pd")
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801012725.150493-1-weiyongjun1@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
sl is controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.
Fix this by sanitizing sl before using it to index ibp->sl_to_sc.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20190731175428.GA16736@embeddedor
Signed-off-by: Doug Ledford <dledford@redhat.com>
