Add SFP module support for Clearfog using the SFP phylink support.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The internal RTC does not work correctly on these Linksys boards based
on Marvell SoCs. For me it only shows Wed Dec 31 23:59:59 1969 and for
others it is off by 3 minutes in 10 minutes running, this was reported
by multiple users. On the Linksys Mamba device the device tree comment
says that no crystal is connected to the internal RTC, this is probably
also true for the other devices.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This series of patches configures few new drivers and adds
omap5 specific nodes:
- Enable USB OTG mode for xhci on am437x
- A series of changes to configure aux control module instance
on omap5 mostly to get the audio clocks configured
- A series of changes to update droid4 for MDM6600 modem USB PHY
and UART1 pinctrl
-----BEGIN PGP SIGNATURE-----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=JWxW
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.17/dt-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Second set of dts changes for omap variants for v4.17" from Tony Lindgren:
This series of patches configures few new drivers and adds
omap5 specific nodes:
- Enable USB OTG mode for xhci on am437x
- A series of changes to configure aux control module instance
on omap5 mostly to get the audio clocks configured
- A series of changes to update droid4 for MDM6600 modem USB PHY
and UART1 pinctrl
* tag 'omap-for-v4.17/dt-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-droid4: Configure uart1 pins
ARM: dts: omap4-droid4: Configure MDM6600 USB PHY
ARM: dts: omap4-droid4: Fix USB PHY port naming
ARM: dts: omap5-board-common: Add phandle for mclk clock for twl6040
ARM: dts: omap5: add fref_xtal_ck support
ARM: dts: omap5: add support for control module wkup pad config
dt-bindings: omap5: ctrl: Support for control module wkup pad config
ARM: dts: am43xx: Enable dual-role mode for USB1
Here is our usual bunch of changes to the common DTSI shared between arm
and arm64, and their associated device trees.
Even though the diffstat is quite big, it's been mostly just cleanups. The
big feature is that the HDMI is now suported on H3 and H5 boards.
-----BEGIN PGP SIGNATURE-----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=hXvM
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner H3/H5 changes for 4.17" from Maxime Ripard:
Here is our usual bunch of changes to the common DTSI shared between arm
and arm64, and their associated device trees.
Even though the diffstat is quite big, it's been mostly just cleanups. The
big feature is that the HDMI is now suported on H3 and H5 boards.
* tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus
ARM: dts: sun8i-h3: Add Mali node
ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards
ARM: dts: sun8i: h3: Enable HDMI output on H3 boards
ARM: dts: sunxi: h3/h5: Add HDMI pipeline
ARM: dts: sun8i: h2-plus: remove unnecessary mmc1_pins node
ARM: dts: sunxi: h3-h5: rename mmc0_pins_a and mmc1_pins_a
ARM: dts: sunxi: h3-h5: Move pinctrl of mmc1 from dts to dtsi
ARM: dts: sunxi: h3-h5: Move pinctrl of mmc0 from dts to dtsi
ARM: dts: sunxi: h3-h5: remove mmc0 card detection pin from pinctrl
ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board
ARM: dts: sunxi: Switch MMC nodes away from cd-inverted property
ARM: dts: nanopi-neo-air: Add WiFi / eMMC
There is a bunch of significant additions for this release cycle:
- The A83t now has HDMI support
- The A80 finally has SMP support (without PSCI, unfortunately)
- The A80 has preliminary display support
And also:
- a number of boards based on old (A10, A20) SoCs now have the HDMI
support enabled.
- The display frontend is enabled on the A33, allowing to use it for
hardware display scaling
- New boards: Olimex A20-SOM204 variants
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE0VqZU19dR2zEVaqr0rTAlCFNr3QFAlqzw6oACgkQ0rTAlCFN
r3Qc5g/+JhIcgMh/aDOEDkq4Z2CFtwUfWl7DbMrat8oqFvh2GQ1m5PhDNiDP1Lh1
Wfvb+RGWFnlm+H1Uv0uq0OrBW0fALD4pqrzlznF9Z3neNf5iWkx0KAjGGgF0x5Mh
SYfyNgM1n6qRROiz5V87hUpMgw1gI3TLa5K7qLK7z0iriFjVzx4hXjoHIbsz4Blq
6Rd0KeTlxsSRmc18xUpl10FdGHIW+XTXT9F96amtWmLI8HjgXQzWFj6/xAXLops1
gqtDkw2jiDkFmddfwBuUzHyfMOvE16+HRHVh0bB+y0mkjbEp9WCiFkKqPbvVJdoJ
lmgS0c68ovarvjpcfYySrpcpourgQN62pUrKlAB5db2b4anPn0xvt0lqJEeCUSVO
D8bMWOEm+haW9ftY1hyIjy5rXYLkCFmAelMWyPrP2Z7U+xWMQztUDDjDxBvgJcHF
9z8batldQfrWvr1c7PK6x2peqqV8OUWhTqAiYjxUhZW7NEIBaEBMArNybc/SmAPj
l0OpYuGfQCFWboo8WlJX6XuB1VoYykPcRcqsOf/qC1/8YC+ego1Ldw1Wu+GUn4d1
0pqyRAViDSCfaZs9O9A9B01vjoHGNW0NthWwTtnPCmEfx9ayg1ext5CqfpWA3Zwf
l59zChs0hJ2sKaParTMTQBsnGiRzdwx7x1YgEZ+w5xoxl47aQbE=
=S3LW
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner DT changes for 4.17" from Maxime Ripard:
There is a bunch of significant additions for this release cycle:
- The A83t now has HDMI support
- The A80 finally has SMP support (without PSCI, unfortunately)
- The A80 has preliminary display support
And also:
- a number of boards based on old (A10, A20) SoCs now have the HDMI
support enabled.
- The display frontend is enabled on the A33, allowing to use it for
hardware display scaling
- New boards: Olimex A20-SOM204 variants
* tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (39 commits)
ARM: dts: sun9i: cubieboard4: Enable VGA display output
ARM: dts: sun9i: Add pinmux settings for LCD0 RGB888 output.
ARM: dts: sun9i: Add device nodes for documented display pipelines for A80
ARM: dts: sun8i: reference tablet design: Enable PMIC power supplies
ARM: dts: sun8i: a33: Enable A33 internal audio codec on A33-OLinuXino
ARM: dts: sun8i: a33: Enable PMIC power supplies on A33-OLinuXino
ARM: dts: sun8i: a33: Drop sunxi-common-regulators.dtsi for A33-OLinuXino
ARM: dts: sun8i: a33: Drop GPIO pinmux settings for A33-OLinuXino
ARM: dts: sun9i: Add enable-method for SMP support for the A80 SoC
ARM: dts: sun8i: h3: Add eMMC for NanoPi M1 Plus
ARM: dts: sun8i: a711: set regulator for each cluster of CPUs
ARM: dts: sun8i: a83t: add stable OPP tables and CPUfreq
ARM: dts: sun8i: a83t: add cpu0 and cpu100 labels
ARM: dtsi: axp81x: remove IP name from DT node name
ARM: dtsi: sun8i: a711: enable battery power supply subnode
ARM: dtsi: axp81x: add battery power supply subnode
ARM: dtsi: axp81x: add node for ADC
ARM: dtsi: axp22x: add node for ADC
ARM: dtsi: axp209: add node for ADC
ARM: dts: sun7i: Enable HDMI support on the Orange Pi mini
...
Pinctrl fixes, the UART pullups were discussed back in 2016.
-----BEGIN PGP SIGNATURE-----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=Pgph
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.17-dt2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
Pull "AT91 DT for 4.17 #2" from Alexandre Belloni:
Pinctrl fixes, the UART pullups were discussed back in 2016.
* tag 'at91-ab-4.17-dt2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: dts: at91sam9260: pullup rx on usart0
ARM: dts: at91rm9200: pullup rx on uart0
ARM: dts: at91: fixes uart pinctrl, set pullup on rx, clear pullup on tx
ARM: dts: at91: at91sam9g25: fix mux-mask pinctrl property
The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
gpio-fan cooling device is found by referring to the
"gpio-fan,speed-map" instead.
Remove the unused properties from the gpio-fan node.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
define the VGA and panel connectors in preparation for DRM.
-----BEGIN PGP SIGNATURE-----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=0XCD
-----END PGP SIGNATURE-----
Merge tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt
Pull "DTS changes for RealView+Versatile" from Linus Walleij:
This augments the RealView and Versatile device trees to properly
define the VGA and panel connectors in preparation for DRM.
* tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: Augment panel setting for Versatile
ARM: dts: Add Versatile IB2 device tree
ARM: dts: Augment VGA connector bridge on Realview PBX
ARM: dts: Augment VGA connector bridge on Realview EB
ARM: dts: Augment VGA connector bridge on PB1176
ARM: dts: Augment VGA connector bridge on PB11MPcore
* Silk board with R-Car E2 (r8a7794) SoC
- Add r1ex24002 EEPROM to DT
Magnus Damm says "Extend the Silk board support to include U14 which is
an I2C based EEPROM hooked up to the I2C1 bus."
- Add GPIO keys to DT
Magnus Damm says "Extend the Silk board support to include SW3, SW4,
SW6 and SW12. They are all connected via GPIO lines and handled by the
gpio-keys driver"
* Marzen board with R-Car H1 (r7a7779) SoC
- Add SDHI0 VCCQ Regulator
Magnus Damm says "Add support for the on-board voltage regulator hooked
up to GPIO3_20 on r8a7779 Marzen. The board schematics describes the
regulator as U4 TPS2110A. Input wise, U4 has D0 fixed to ground, D1
tied to GPIO3_20 while IN1 is fixed to 3.3V and IN2 is fixed to 1.8V.
OUT goes to the pull-ups for the data pins of SDHI0."
* Porter board with R-Car M3W (r8a7791) SoC
- Fix HDMI output routing
Laurent Pinchart says "The HDMI encoder is connected to the RGB output
of the DU, which is port@0, not port@1."
* iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) and
iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
- Enable cmt0
* Stout board with R-Car H2 (r8a7790) SoC
- Initial support
* Lager board with R-Car H2 (r8a7790) SoC
- Add CEC clock for HDMI transmitter
Niklas Söderlund says "The adv7511 on the Lager board has a 12 MHz
fixed clock for the CEC block. Specify this in the dts to enable CEC
support."
- Move cec_clock to root node
By definition nodes without a bus address do not belong on the bus
* kzm9d board with EMMA Mobile EV2 (EMEV2) SoC
- Fix "debounce-interval" property misspelling
* RZ/G1M (r8a7743) and RZ/G1H (r8a7745) SoCs
- Add IPMMU DT nodes
- Add VSP support
* R-Car Gen2 boards
- Use I2C demuxer for
This allows run-time switching between alternate I2C IP blocks
* R-Car Gen2 and RZ/G1 SoCs
- Clean up DT files to ease future maintenance
+ add soc node for IP attached to the bus
+ sort subnodes of soc and root node
+ consistently use single space after =
* R-Car H2 (r8a7790), M3-W (r8a7791) and M3-N (r7a7793) SoCs
- Reduce size of thermal registers
According to the "User's Manual: Hardware" v2.00 the registers at base
0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the
case on the r8a73a4 (R-Mobile APE6).
This should not have any runtime affect as mapping granularity is
PAGE_SIZE.
-----BEGIN PGP SIGNATURE-----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=dZnw
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Renesas ARM Based SoC DT Updates for v4.17" from Simon Horman:
* Silk board with R-Car E2 (r8a7794) SoC
- Add r1ex24002 EEPROM to DT
Magnus Damm says "Extend the Silk board support to include U14 which is
an I2C based EEPROM hooked up to the I2C1 bus."
- Add GPIO keys to DT
Magnus Damm says "Extend the Silk board support to include SW3, SW4,
SW6 and SW12. They are all connected via GPIO lines and handled by the
gpio-keys driver"
* Marzen board with R-Car H1 (r7a7779) SoC
- Add SDHI0 VCCQ Regulator
Magnus Damm says "Add support for the on-board voltage regulator hooked
up to GPIO3_20 on r8a7779 Marzen. The board schematics describes the
regulator as U4 TPS2110A. Input wise, U4 has D0 fixed to ground, D1
tied to GPIO3_20 while IN1 is fixed to 3.3V and IN2 is fixed to 1.8V.
OUT goes to the pull-ups for the data pins of SDHI0."
* Porter board with R-Car M3W (r8a7791) SoC
- Fix HDMI output routing
Laurent Pinchart says "The HDMI encoder is connected to the RGB output
of the DU, which is port@0, not port@1."
* iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) and
iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
- Enable cmt0
* Stout board with R-Car H2 (r8a7790) SoC
- Initial support
* Lager board with R-Car H2 (r8a7790) SoC
- Add CEC clock for HDMI transmitter
Niklas Söderlund says "The adv7511 on the Lager board has a 12 MHz
fixed clock for the CEC block. Specify this in the dts to enable CEC
support."
- Move cec_clock to root node
By definition nodes without a bus address do not belong on the bus
* kzm9d board with EMMA Mobile EV2 (EMEV2) SoC
- Fix "debounce-interval" property misspelling
* RZ/G1M (r8a7743) and RZ/G1H (r8a7745) SoCs
- Add IPMMU DT nodes
- Add VSP support
* R-Car Gen2 boards
- Use I2C demuxer for
This allows run-time switching between alternate I2C IP blocks
* R-Car Gen2 and RZ/G1 SoCs
- Clean up DT files to ease future maintenance
+ add soc node for IP attached to the bus
+ sort subnodes of soc and root node
+ consistently use single space after =
* R-Car H2 (r8a7790), M3-W (r8a7791) and M3-N (r7a7793) SoCs
- Reduce size of thermal registers
According to the "User's Manual: Hardware" v2.00 the registers at base
0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the
case on the r8a73a4 (R-Mobile APE6).
This should not have any runtime affect as mapping granularity is
PAGE_SIZE.
* tag 'renesas-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (47 commits)
ARM: dts: silk: Add GPIO keys to DT
ARM: dts: silk: Add r1ex24002 EEPROM to DT
ARM: dts: marzen: Add SDHI0 VCCQ Regulator
ARM: dts: stout: Initial r8a7790 Stout board support
ARM: dts: lager: Move cec_clock to root node
ARM: dts: kzm9d: Fix "debounce-interval" property misspelling
ARM: dts: gose: use demuxer for I2C4
ARM: dts: gose: use demuxer for I2C2
ARM: dts: silk: use demuxer for I2C1
ARM: dts: alt: use demuxer for I2C1
ARM: dts: porter: use demuxer for I2C2
ARM: dts: koelsch: use demuxer for I2C4
ARM: dts: koelsch: use demuxer for I2C2
ARM: dts: lager: use demuxer for IIC3/I2C3
ARM: dts: lager: use demuxer for IIC2/I2C2
ARM: dts: r8a7745: Add VSP support
ARM: dts: r8a7743: Add VSP support
ARM: dts: r8a7745: Add IPMMU DT nodes
ARM: dts: r8a7743: Add IPMMU DT nodes
ARM: dts: r8a7745: sort subnodes of soc node
...
Support for the VDE is added on Tegra30 along with some general cleanup
and some improvements to the various Toradex boards.
-----BEGIN PGP SIGNATURE-----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=Dqxp
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.17-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
Pull "ARM: tegra: Device tree changes for v4.17-rc1" from Thierry Reding:
Support for the VDE is added on Tegra30 along with some general cleanup
and some improvements to the various Toradex boards.
* tag 'tegra-for-4.17-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: apalis-tk1: Support v1.2 hardware revision
ARM: tegra: apalis-tk1: Copyright period, spurious newlines
ARM: tegra: apalis-tk1: Hog group for ethernet, PCIe, reset GPIOs
ARM: tegra: apalis-tk1: Add missing as3722 gpio0 configuration
ARM: tegra: apalis-tk1: Activate PWM pin muxing for pwm3
ARM: tegra: apalis-tk1: Set critical trips
ARM: tegra: apalis/colibri: Remove unneeded reg property
ARM: tegra: apalis/colibri: Use correct compatible for RTC
ARM: tegra: Fix I2C bus frequencies on Apalis/Colibri
ARM: tegra: venice2: Remove duplicate pcie-1 node
ARM: tegra: beaver: Remove invalid uses of rsvd1
ARM: tegra: Use proper IRQ type definitions
ARM: tegra: Fix ULPI regression on Tegra20
ARM: tegra: Add unit address to VDE IRAM area
ARM: tegra: Add video decoder node on Tegra30
ARM: tegra: Add IRAM node on Tegra30
The first and second patches fix the regulator support for the Bananapi M2
board.
The last one updates my email address in MAINTAINERS.
-----BEGIN PGP SIGNATURE-----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=GQc4
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Pull "Allwinner Fixes for 4.16" from Maxime Ripard:
The first and second patches fix the regulator support for the Bananapi M2
board.
The last one updates my email address in MAINTAINERS.
* tag 'sunxi-fixes-for-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
MAINTAINERS: update email address for Maxime Ripard
ARM: dts: sun6i: a31s: bpi-m2: add missing regulators
ARM: dts: sun6i: a31s: bpi-m2: improve pmic properties
stat(1) is not standardized and different implementations have their own
(conflicting) flags for querying the size of a file.
ls(1) provides the same information (value of st.st_size) in the 5th
column, except when the file is a character or block device. This output
is standardized[0]. The -n option turns on -l, which writes lines
formatted like
"%s %u %s %s %u %s %s\n", <file mode>, <number of links>,
<owner name>, <group name>, <size>, <date and time>,
<pathname>
but instead of writing the <owner name> and <group name>, it writes the
numeric owner and group IDs (this avoids /etc/passwd and /etc/group
lookups as well as potential field splitting issues).
The <size> field is specified as "the value that would be returned for
the file in the st_size field of struct stat".
To avoid duplicating logic in several locations in the tree, create
scripts/file-size.sh and update callers to use that instead of stat(1).
[0] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/ls.html#tag_20_73_10
Signed-off-by: Michael Forney <forney@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Send nm complaints about broken pipe (when sed exits early) to /dev/null.
All errors should be printed to stderr.
Don't trap on normal exit so the trap can return an error code.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Fixes the warning "GIC: PPI13 is secure or misconfigured" by
changing the interrupt type from level_low to edge_raising
Signed-off-by: Philipp Puschmann <pp@emlix.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
For consistency with all other serial pins, add this pullup. It also
prevents the signal from floating and so consuming a useless extra amount
of power in crowbarred state if nothing is connected to RX.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
For consistency with all other serial pins, add this pullup. It also
prevents the signal from floating and so consuming a useless extra amount
of power in crowbarred state if nothing is connected to RX.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Remove pullup on uart TX signals, they are push-pull outputs thus
pullups are pointless.
Add pullup on uart RX signals, they prevent the RX signals to be left
floating and so consuming a useless extra amount of power in crowbarred
state if nothing is connected to RX.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
There are only 19 PIOB pins having primary names PB0-PB18. Not all of them
have a 'C' function. So the pinctrl property mask ends up being the same as the
other SoC of the at91sam9x5 series.
Reported-by: Marek Sieranski <marek.sieranski@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Update the "gpio-ranges" property of the CBUS GPIO controller on Meson8b
because it only provides 83 GPIOs.
The GPIO definitions in include/dt-bindings/gpio/meson8b-gpio.h
inherited all GPIOs from Meson8 until recently. However, Meson8b does
not support all GPIOs which are supported by Meson8 (Meson8b doesn't
have a GPIOZ bank, most of the pins from the GPIODV bank are missing on
Meson8b - just to name a few differences).
The actual number of GPIOs is only 83, instead of 120 from Meson8 plus
the 10 GPIOs from the DIF bank on Meson8b.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The Odroid C1 features a microSD slot. This patch adds the necessary
DT bindings to support it.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
These are needed to use the n_gsm driver for TS 27.010 UART
multiplexing. Note that support for the OOB wake gpio is still
missing so the UART is not yet usable for n_gsm.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Configure MDM6600 USB PHY.
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We have a USB OCHI PHY on port 1 for mdm6600. Port 2 is using transceiverless
logic (TLL) for USB EHCI for w3glte modem.
Let's also fix the node name to use usb-phy while at it.
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds syscon property for specifying soc-glue core into
device-tree of PXs2 SoC.
Currently, soc-glue core is used for changing the state of S/PDIF
signal output pin to signal output state or Hi-Z state.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The xref_xtal clock is used by twl6040 as mclk. It is needed for the HPPLL
internally.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The clock is directly sourced from sys_clkin, and provides an external
output clock for (typically) TWL6040 chip.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The pad configuration area under control module wkup has some miscellaneous
config registers, that are not pinmux related. Add a separate area for
these, and add support for syscon / clocks under this new area.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
USB1 port is micro-AB type and can function as peripheral
as well as host. Enable dual-role mode for USB1.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds the actual VGA DAC bridge that is used in the
Versatile AB, and sets the mode to 640x480 VGA.
The "clcd" clock was incorrectly named, the proper name
(from bindings) is "clcdclk". So far drivers survived
by just getting the first clock, but future drivers will
use named clocks.
We add the panel connector to the
"arm,versatile-tft-panel" as well, the signals actually
fork on the board, reaching both the VGA DAC and the
display connector.
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Versatile board can be equipped with a interface board
just named "IB2". This was created in the early 2000s for
prototyping GSM candybar phone form factor products.
The IB2 board contains:
- Cascaded interrupt controller
- Enfora Enabler GSM0308 quad-band module with antenna and
separate audio jack
- Keypad with joystick
- Sanyo 2.5" color display
- A 28-pin connector for mounting a camera
This adds a DTS file for the combination of the Versatile AB
with an IB2 daughterboard mounted, making the LED blink and
making the system controller available for drivers, such as
the panel driver.
The device tree bindings already exist in
Documentation/devicetree/bindings/arm/arm-boards.
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The PL111 in the ARM reference platforms are connected to
"panels" that are actually dumb VGA DAC connector bridges.
Now that we can support the proper bridges in the DRM driver,
fix this up.
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The PL111 in the ARM reference platforms are connected to
"panels" that are actually dumb VGA DAC connector bridges.
Now that we can support the proper bridges in the DRM driver,
fix this up.
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The PL111 in the ARM reference platforms are connected to
"panels" that are actually dumb VGA DAC connector bridges.
Now that we can support the proper bridges in the DRM driver,
fix this up.
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The PL111 in the ARM reference platforms are connected to
"panels" that are actually dumb VGA DAC connector bridges.
Now that we can support the proper bridges in the DRM driver,
fix this up.
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Cubieboard4 has a dumb VGA DAC connected to the output of LCD0,
providing VGA output through the onboard VGA connector. The DDC lines
are connected to i2c3.
The VGA DAC is a GM7123, which is compatible with Analog Devices'
ADV7123, except it only takes 3.3V power, and has a lower standby power
consumption. The datasheet found online lists "Chengdu GoldTel Electronical
Technology Co., Ltd." as its designer. The company changed its name in
2014 to "Chengdu Corpro Technology Co., Ltd.". Their website lists similar
ICs, but not actually the GM7123.
Enable the display pipeline with the VGA DAC and connector, and i2c3
for DDC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The A80 supports RGB888 with H/V sync from LCD0. Add a pinmux setting
for the needed pins.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This patch adds some device nodes for the PCIe function block and updates
related pinmux.
Moreover, we add interrupt-map properties in both parent and children as
the chip only has one IRQ per slot that is connected to all INTx and get
propagated through the bridges and it also represents the root ports own
interrupts.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The H3 has an ARM Mali 400 GPU, so add binding to our DT.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
It should be good that no use "_" is in DT node name. Consequently,
those nodes in certain files which have an inappropriate name containing
"_" are all being replaced with "-".
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The property pinctrl-names is totally superfluous. It would be good to
remove the property to keep the node neatness. There is actually
unnecessary to set up any pins for data path TRGMII between main SoC and
MT7530. Furthermore, it's more reasonable for the pin setup of control
path MDIO bus is being placed inside the node of ethernet controller.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
On bpi-r2 board, totally there're four UARTs which we usually called
uart[0-3] helpful to extend slow-I/O devices. Among those ones, uart2 has
dedicated pin slot which is used to console log. uart[0-1] appear at the
40-pins connector and uart3 has no pinout, but just has test points (TP47
for TX and TP48 for RX, respectively) nearby uart2, but we don't enable
uart3 in the patch. The missing pinctrl is also being supplemented for
those newly added devices.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Both mmc devices on bananapi-r2 board should all use the fixed regulators
as their power source instead of PMIC MT6323 exports.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Extend the Silk board support to include SW3, SW4, SW6 and SW12. They
are all connected via GPIO lines and handled by the gpio-keys driver.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Extend the Silk board support to include U14 which is an I2C based EEPROM
hooked up to the I2C1 bus.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for the on-board voltage regulator hooked up to GPIO3_20
on r8a7779 Marzen. The board schematics describes the regulator as U4
TPS2110A. Input wise, U4 has D0 fixed to ground, D1 tied to GPIO3_20
while IN1 is fixed to 3.3V and IN2 is fixed to 1.8V. OUT goes to the
pull-ups for the data pins of SDHI0.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Stout base board support making use of 1 GiB of memory,
the Renesas H2 r8a7790 SoC with the SCIFA0 serial port
and CA15 with ARM architected timer.
Furthermore, this device tree contains entries for:
- 4x LEDs
- SDHI SD/MMC controller
- Display unit with HDMI output
- SH fast ethernet controller
- QSPI controller with S25FL512S attached to it
- I2C controller with DA9210 and DA 9063 PMICs
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
cec-clock is a fixed clock generator that is not controlled by i2c-12
and thus should not be a child of the i2c-12 bus node. Rather, it should
be a child of the root node of the DT.
Fixes: c5aa879776 ("ARM: dts: lager: Add CEC clock for HDMI transmitter")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
"debounce_interval" was never supported.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
DTC now warns about missing #sound-dai-cells:
/sound/simple-audio-card,codec: Missing property '#sound-dai-cells' in
node /soc/aips-bus@2100000/i2c@21a0000/codec@a or bad phandle
(referred from sound-dai[0])
Pass the required '#sound-dai-cells' property to fix it.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use the standard 'stdout-path' property to fix the following DTC warnings:
arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dtb: Warning
(chosen_node_stdout_path): /chosen:linux,stdout-path: Use
'stdout-path' instead
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
dtc now gives the following warnings:
arch/arm/boot/dts/stih410-b2120.dtb: Warning (sound_dai_property): /soc/sound/simple-audio-card,dai-link@0/codec: Missing property '#sound-dai-cells' in node /soc/sti-display-subsystem/sti-hdmi@8d04000 or bad phandle (referred from sound-dai[0])
arch/arm/boot/dts/stih407-b2120.dtb: Warning (sound_dai_property): /soc/sound/simple-audio-card,dai-link@0/codec: Missing property '#sound-dai-cells' in node /soc/sti-display-subsystem/sti-hdmi@8d04000 or bad phandle (referred from sound-dai[0])
arch/arm/boot/dts/stih410-b2260.dtb: Warning (sound_dai_property): /soc/sound/simple-audio-card,dai-link@0/codec: Missing property '#sound-dai-cells' in node /soc/sti-display-subsystem/sti-hdmi@8d04000 or bad phandle (referred from sound-dai[0])
Add the missing #sound-dai-cells property.
Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Updates to OpenPower BMC systems:
A number of updates to use recently merged drivers, including moving to
upstreamed IPMI BT nodes, a temp sensor for Romulus, and adding
simple-reset for UARTs.
This includes more of Palmetto's device tree, so that it's ever so
close to booting the host with an upstream kernel.
New machines:
Add Qualcomm Centriq ARM64 server reference platform, which will run
OpenBMC on an AST2500.
-----BEGIN PGP SIGNATURE-----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=7HDC
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.17-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt
Pull "ASPEED device tree updates for 4.17" from Joel Stanley:
Updates to OpenPower BMC systems:
A number of updates to use recently merged drivers, including moving to
upstreamed IPMI BT nodes, a temp sensor for Romulus, and adding
simple-reset for UARTs.
This includes more of Palmetto's device tree, so that it's ever so
close to booting the host with an upstream kernel.
New machines:
Add Qualcomm Centriq ARM64 server reference platform, which will run
OpenBMC on an AST2500.
* tag 'aspeed-4.17-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: Add Qualcomm Centriq 2400 REP BMC
ARM: dts: aspeed: romulus: Add w83773g temp sensor
ARM: dts: aspeed: romulus: hog GPIOS7
ARM: dts: romulus: Remove MAX31785 device
ARM: dts: palmetto: Request mux as per strapping configuration
ARM: dts: palmetto: Enable rear UART
ARM: dts: aspeed: Add LPC reset controller node
ARM: dts: aspeed: Add Palmetto GPIO hogs
ARM: dts: palmetto: Add LEDs and GPIO keys
ARM: dts: aspeed: Add LPC clock phandles
ARM: dts: aspeed-g5: Update LPC node
ARM: dts: aspeed: Enable IPMI BT node on OpenPower machines
ARM: dts: aspeed: Add IPMI BT node
According to Documentation/process/license-rules.rst, move the SPDX
License Identifier to the very top of the file. I used C++ comment
style not only for the SPDX line but for the entire block because
this seems Linus' preference [1]. I also dropped the parentheses to
follow the examples in that document.
[1] https://lkml.org/lkml/2017/11/25/133
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The UniPhier AIO audio system needs I2S data in/out lines
and clock signal pins to connect external codec chip.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since 'num-slots' had already deprecated, remove the property in
device-tree file.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Since 'num-slots' had already deprecated, remove the property in
device-tree file.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The compatible string was mistakenly pulled from the downstream tree and the
startup delay property is needed to prevent io errors on initial page select.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The #sound-dai-cells property may be required to reference the CPU DAI
properly. This change is required for Snow HDMI audio.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
As serial interface is already specified into stdout-path property,
"console=ttyASN,115200" from bootargs can be removed.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update serial aliases from "ttyASN" to more common "serialN".
Since dtc v1.4.6-9-gaadd0b65c987, aliases property name must
be lowercase only. This allows to fix following dtc warnings:
arch/arm/boot/dts/stih418-b2199.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
arch/arm/boot/dts/stih407-b2120.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
arch/arm/boot/dts/stih410-b2260.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
arch/arm/boot/dts/stih410-b2120.dtb: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VCHIQ firmware communication channel operates in parallel with our
other mailbox-based channel. This is the communication channel that
exposes the firmware's media decode/encode and ISP interfaces.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com> (v2)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we removed the inclusion of skeleton.dtsi from the device trees, we
broke booting for systems with bootloaders that aren't device tre aware.
This can be seen, for example, when appending the device tree blob to
the kernel image.
The reason booting broke was that the kernel lacked the device_type
label in the memory node. Add in a default memory node wth the
device_type. It can contain the memory address as the location is fixed
for each SoC generation, but the size needs to be added by the
bootloader or the board specific dts.
Fixes: 73102d6fdc ("ARM: dts: aspeed: Remove skeleton.dtsi")
Cc: <stable@vger.kernel.org>
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm Centriq 2400 REP (Reference Evaluation Platform) is
an aarch64 Armv8 server platform with an ast2520 BMC.
Signed-off-by: Ken Chen <chen.kenyy@inventec.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
GPIOS7 shall be pulled low for CPLD to continue the power up sequence.
With this hogged as pull-low, the CPLD workaround can be removed in
OpenBMC.
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Romulus uses ASPEED's fan tach instead of max31785:
* Pass1's max31785 is always reset by CPLD
* Pass2's max31785 is not connected
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
for 4.17, please pull the following:
- Henry fixes the pin functions for the JTAG pins, nothing uses this for
now, but it could be backported eventually if deemed appropriate
- Stefan fixes the register ranges for the bcm2835-i2s nodes in the
binding document definition, he then fixes the probing of the
bcm2835-i2s driver by providing an appropriate register range and a
missing clock. Stefan also makes sure that the appropriate pull
settings are applied to the pins used on the Raspberry Pi Zero
Wireless, he then adds the necessary UART node to connected to the
BCM43438 Bluetooth adapter on the Pi Zero W. He finally enables USB
OTG mode on the Pi Zero W since he became usable again
- Baruch adds the necessary Device Tree nodes to support the Raspberry
Pi GPIO expander which is controlled via the VC4 firmware
- Hiroshi adds the missing LEDs on the Buffalo WZR-900DHP router
- Eric adds the DPI hardware block into the BCM283x Device Tree include
file for future use when an actual panel is available
- Florian updates the Northstar Plus platforms to use port 8 of the
internal switch as the CPU/management port since necessary code was
added in the b53 switch driver to support that
-----BEGIN PGP SIGNATURE-----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=SKgx
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.17/devicetree' of https://github.com/Broadcom/stblinux into next/dt
Pull "Broadcom devicetree changes for 4.17" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs devicetree changes
for 4.17, please pull the following:
- Henry fixes the pin functions for the JTAG pins, nothing uses this for
now, but it could be backported eventually if deemed appropriate
- Stefan fixes the register ranges for the bcm2835-i2s nodes in the
binding document definition, he then fixes the probing of the
bcm2835-i2s driver by providing an appropriate register range and a
missing clock. Stefan also makes sure that the appropriate pull
settings are applied to the pins used on the Raspberry Pi Zero
Wireless, he then adds the necessary UART node to connected to the
BCM43438 Bluetooth adapter on the Pi Zero W. He finally enables USB
OTG mode on the Pi Zero W since he became usable again
- Baruch adds the necessary Device Tree nodes to support the Raspberry
Pi GPIO expander which is controlled via the VC4 firmware
- Hiroshi adds the missing LEDs on the Buffalo WZR-900DHP router
- Eric adds the DPI hardware block into the BCM283x Device Tree include
file for future use when an actual panel is available
- Florian updates the Northstar Plus platforms to use port 8 of the
internal switch as the CPU/management port since necessary code was
added in the b53 switch driver to support that
* tag 'arm-soc/for-4.17/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: NSP: Switch to port 8 for CPU port
ARM: bcm2835: Add the DPI hardware to the device tree.
ARM: dts: BCM5301X: add missing LEDs for Buffalo WZR-900DHP
ARM: dts: bcm2835-rpi-zero-w: Enable OTG mode
ARM: dts: bcm2835-rpi-zero-w: Add bcm43438 serial slave
ARM: dts: bcm283x: Apply pull settings to Zero W relevant groups
ARM: dts: bcm2837-rpi-3-b: add GPIO expander
ARM: dts: bcm2835: make the firmware node into a bus
ARM: dts: bcm283x: Fix probing of bcm2835-i2s
dt-bindings: bcm283x: Fix register ranges of bcm2835-i2s
ARM: dts: bcm283x: Fix pin function of JTAG pins
Now that we have added support for pre-pended Broadcom tags with commit
1160603960 ("net: dsa: b53: Support prepended Broadcom tags") we can
switch all the Northstar Plus reference boards to use port 8 for the CPU
port. This allows us to prepare room for supporting the Flow Accelerator
2 NAPT offload, and frees up port 5 to be made fully configurable for
the modes that it supports: internal, SGMII, RGMII etc.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
It's currently marked disabled, as it's not useful without a panel
associated with it and the GPIO pins routed to ALT2.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
"debounce-inteval" was never supported.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlqj2kgQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgaqOB/9y1t3gsyrUh2A6BwxS5MuHgO34YNsqm2n+
s8RDLit9Y/oAWU2G0CksTW6ksT8BboHV0xO12kC9HlUG/ia0ISm9XPXtbCc2KOae
wxc4tJ5BH2fz7NT1cfPEnVTkO3dA+0c3N9R9puOzrh796PVfRsjxYHtPWb2Qe3FT
Uz1JCA0/I9gSxFU/Mqte2ShtygSY6XznyWgqsRIzDgFbR9AWqyG+6fIdkcabE++O
uL1ucGaL3eLN8zgmZ6w20ZPAimkev6KbzA5VYtXgotSfXFcWJGEJzzeDpR2QAd0B
0Cua9ty/PiJLg121MO53iyGppRblB0yZAEnuBK9gQNGhT3u3o7t5
=sCTW
-----END PGP SIGNATURE-----
Merge tag 'v4.16-rockchip-dts32fixes-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Pull "Rockchip dts32 fixes for 4.16" from Heiko Stübner:
Fix for a new dtc warning.
* tag 'v4.16-rockchip-dts32fixes-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add missing #sound-dai-cells on rk3288
- Fix a copy-paste error in imx7d-sdb device tree, which results in two
usb-otg regulators are both named "regulator-usb-otg1-vbus" and
override each other.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaoiVxAAoJEFBXWFqHsHzOnu4H/Rx0n2o4jwFXeoQmwdGJoOkj
oo3LTjtAossU3ePuzgLhPooSaXXaCRDuTTIyiURFj8CmO2tkYuyjmwd0VI4QNPhC
I+dHUfpYgNpvpFd0gZDkGnYnptXf5sQ+lMdNhneqyOxwF8xQTwnMhwYvfkb1CIu/
3Q3vOTDes/K07+L9rTPihO0h8A3738WyR6PmTPP00sQTzYU+29pVKMYoS4u01c1A
PFcyfbY3Sggbd/NRexGpWyMPD6QQa7WUx3lwoTdOinT0XqQ9tG2TqZzQ5yhDrh24
sHzJVD0dWqJL717+IY7cEp4ma78JFGmO62C6nwWGfh4uJ/g4qmP7aAaDA5bfsDU=
=pBTN
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.16-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Pull "i.MX fixes for 4.16, 2nd round" from Shawn Guo:
- Fix a copy-paste error in imx7d-sdb device tree, which results in two
usb-otg regulators are both named "regulator-usb-otg1-vbus" and
override each other.
* tag 'imx-fixes-4.16-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name
- minor changes for property API
- clock API fix for ULPI driver warning
It exceptionally contains a merge from the mtd tree from Boris
to prevent any merge conflicts in the PXA tree.
-----BEGIN PGP SIGNATURE-----
iQJLBAABCAA1FiEExgkueSa0u8n4Ls+HA/Z63R24yxIFAlqi9CMXHHJvYmVydC5q
YXJ6bWlrQGZyZWUuZnIACgkQA/Z63R24yxIa0g//aCllCGnEY2S5+hxtg7eCAkEg
QKqBTpHhGUDpvix8MwWrt+089Kj5CWHknx7PWQs3YQj/XzevA5mX65szteICfDX2
K0BJj/OsecKBTCdHjVOEerM6Yy6nKrL0gX7zzUuD81H54Dk6os2pnruZEYEIn1HD
/YhWprLs0sDqwjPI/a9Tfqw5N3nM3uStl0hp3HDplw2AtIovL/E4CrPt9Q3CCtEy
Qj1PtM0ON9UkrlnHnFNEh3f5bja9Lwo1v3IueSoTWw8UdyxoA3itPXo+5pHZv5GG
H4UXan1vYSaj1ISsAnOt9YuFxEMl4+d8BfKmzrqr2CAlNAeMPJRZ66UdYTecx1FJ
z65kxxLiBi7r1eQqvBz6PhtKndHKUbBHJjc4RVJFm8PY7fzW/6LReDnHhUYpxfB1
K5BfzfIPjH3ex9PME370gZx6wdtaepSgeQFpo2jpCI1AXO1IFEdD0v/IkQounrUe
fgBle5yW4qQMuG+EDDOn/aDosVx7uM4856V7JtMrhUecB8fMwZ0elCaCSnchZO/G
mOeZUa9YXUOfFVBpKdidQzVxMQBP62zd8MFKOCOIkKUjfBC9AHRn1nLkXQak8hNt
HjRY34YqIEzbn5+3SRJO9doTV7oXMSOTfDvsQFugalhOKgHRZo7IpkREhqWWXByw
r7vKVVY1elTGKVVWdUQ=
=/vgG
-----END PGP SIGNATURE-----
Merge tag 'pxa-for-4.17' of https://github.com/rjarzmik/linux into next/soc
Pull "This is the pxa changes for v4.17 cycle" from Robert Jarzmik:
- minor changes for property API
- clock API fix for ULPI driver warning
It exceptionally contains a merge from the mtd tree from Boris
to prevent any merge conflicts in the PXA tree.
* tag 'pxa-for-4.17' of https://github.com/rjarzmik/linux:
ARM: pxa/raumfeld: use PROPERTY_ENTRY_U32() directly
ARM: pxa: ulpi: fix ulpi timeout and slowpath warn
ARM: pxa: cm-x300: remove inline directive
ARM: pxa: fix static checker warning in pxa3xx-ulpi
MAINTAINERS: remove entry for deleted pxa3xx_nand driver
arm: dts: pxa: use reworked NAND controller driver
dt-bindings: mtd: remove pxa3xx NAND controller documentation
mtd: nand: remove useless fields from pxa3xx NAND platform data
mtd: nand: remove deprecated pxa3xx_nand driver
mtd: nand: use Marvell reworked NAND controller driver with all platforms
Add emif node for keystone2 devices, which is used for ECC support.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
[t-kristo@ti.com: made emif enabled by default for all keystone2 devices]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a watchdog node for keystone-k2g, with the corresponding clock and
power domain handles.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- use 'atmel' as at24 manufacturer
- device addition and fixes for axentia boards
- fix sama5d4 pinctrl compatible
-----BEGIN PGP SIGNATURE-----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=8iJ8
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.17-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
Pull "AT91 DT for 4.17" from Alexandre Belloni:
Not much this cycle, mainly changes on the Axentia boards from Peter and
a cleanup from Bartosz:
- use 'atmel' as at24 manufacturer
- device addition and fixes for axentia boards
- fix sama5d4 pinctrl compatible
* tag 'at91-ab-4.17-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9263ek
ARM: dts: at91: use 'atmel' as at24 manufacturer for at91-sama5d2_ptc_ek
ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9g20ek
ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9260ek
ARM: dts: at91: use 'atmel' as at24 manufacturer for sama5d34ek
ARM: dts: at91: sama5d4: fix pinctrl compatible string
ARM: dts: at91: tse850: make the sound dai cell count explicit
ARM: dts: at91: nattis: add lvds-encoder
ARM: dts: at91: nattis: use up-to-date mtd partitions
ARM: dts: at91: tse850: use the correct compatible for the eeprom
ARM: dts: at91: nattis: use the correct compatible for the eeprom
ARM: dts: at91: sam9rl: Properly assign copyright
Most of them are small fixes or cleanup.
Only the change on the clearfog will have a noticeable effect allowing
to use the i2c at an higher frequency.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWqK/8QAKCRALBhiOFHI7
1RRAAKCHV/9lXDrSQJlnmrQg0QkY8wZeggCeO7falJ3+WpWl03xKxcaqUQVNFIc=
=jSYw
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.17-1' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu dt for 4.17 (part 1)" from Gregory CLEMENT:
Most of them are small fixes or cleanup.
Only the change on the clearfog will have a noticeable effect allowing
to use the i2c at an higher frequency.
* tag 'mvebu-dt-4.17-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada388-clearfog: increase speed of i2c0 to 400kHz
arm: dts: kirkwood: fix error in #sound-dai-cells size
ARM: dts: kirkwood: Fix "debounce-interval" property misspelling
ARM: dts: armada: netgear-rn*: fix rtc node name
This adds information, that the battery is charged by the charger.
The Linux kernel uses this information to refresh battery information
when the power-supply changes.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Fix that USB initialization fails as below runtime log is present during
booting on bananapi-r2 board by adding missing regulators the USB device
requires. Current regulators USB device uses are being updated with the
correct ones to reflect real configurations which are all from fixed
regulators rather than MT6323 one's output.
xhci-mtk 1a1c0000.usb: 1a1c0000.usb supply vbus not found, using dummy regulator
xhci-mtk 1a240000.usb: 1a240000.usb supply vbus not found, using dummy regulator
Cc: stable@vger.kernel.org
Fixes: f4ff257cd1 ("arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
[mb: update kernel log in commit message]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The A23/A33 reference tablet design has a DC barrel tied to the ACIN
of the PMIC. And being a tablet, it has a Li-Po battery.
Enable both power supplies in the device tree.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The A33-OLinuXino routes the SoC's headphone output to a headphone jack,
and the microphone input to a microphone jack. Power to the microphone
is provided by MBIAS.
This patch enables the various parts of the codec, and adds widgets and
routes for simple-card.
HBIAS is connected to the microphone jack as well, but in a manner that
is confusing and likely does not provide power. This part is left out
of this patch.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The A33-OLinuXino has a DC jack wired to the onboard PMIC's ACIN pins.
There is also a battery connector, wired to the PMIC's battery charger.
Enable the power supplies for both these components.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
None of the common regulators defined in sunxi-common-regulators.dtsi
are used for the A33-OLinuXino.
Drop the include.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Normal GPIO usage does not need an additional pinmix setting. Exclusive
usage of the pin will be guaranteed by the driver.
Drop the extra pinmux settings.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
