Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1601233948-11629-12-git-send-email-Julia.Lawall@inria.fr
A 100MHZ 32-bit timer will be wrapped up less than 43s. Although the
kernel maintains a software high 32-bit count in the tick IRQ. But it's
not applicable to the user mode APPs.
Note: The kernel still uses the lower 32 bits of the timer.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200918132237.3552-9-thunder.leizhen@huawei.com
The ARM SP804 supports a maximum of 32-bit counter, but Hisilicon extends
it to 64-bit. That means, the registers: TimerXload, TimerXValue and
TimerXBGLoad are 64bits, all other registers are the same as those in the
SP804. The driver code can be completely reused except that the register
offset is different.
Use compatible = "hisilicon,sp804" mark as Hisilicon sp804 timer.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200918132237.3552-8-thunder.leizhen@huawei.com
The ARM SP804 supports a maximum of 32-bit counter, but Hisilicon extends
it to 64-bit. That means, the registers: TimerXload, TimerXValue and
TimerXBGLoad are 64bits, all other registers are the same as those in the
SP804. The driver code can be completely reused except that the register
offset is different.
Currently, we get a timer register address by: add the constant register
offset to the timer base address. e.g. "base + TIMER_CTRL". It can not be
dynamically adjusted at run time.
So create a new structure "sp804_timer" to record the original registers
offset, and create a new structure "sp804_clkevt" to record the
calculated registers address. So the "base + TIMER_CTRL" is changed to
"clkevt->ctrl", this will faster than "base + timer->ctrl".
For example:
struct sp804_timer arm_sp804_timer = {
.ctrl = TIMER_CTRL,
};
struct sp804_clkevt clkevt;
clkevt.ctrl = base + arm_sp804_timer.ctrl.
- writel(0, base + TIMER_CTRL);
+ writel(0, clkevt->ctrl);
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200918132237.3552-7-thunder.leizhen@huawei.com
Add two local variables: timer1_base and timer2_base in sp804_of_init(),
to avoid repeatedly calculate the base address of timer2, and make it
easier to recognize timer1. Hope to make the next patch looks more clear.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200918132237.3552-6-thunder.leizhen@huawei.com
writel(0, base + TIMER_CTRL);
... ...
writel(xxx | TIMER_CTRL_PERIODIC, base + TIMER_CTRL);
The timer is just temporarily disabled, and it will be set to periodic
mode later.
The description of the field TimerMode of the register TimerXControl
as shown below:
0 = Timer module is in free-running mode (default)
1 = Timer module is in periodic mode.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200918132237.3552-5-thunder.leizhen@huawei.com
Delete the leading "__" of __sp804_clocksource_and_sched_clock_init() and
__sp804_clockevents_init(), make it looks a little more comfortable.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200918132237.3552-4-thunder.leizhen@huawei.com
Since commit 7484c727b6 ("ARM: realview: delete the RealView board
files") and commit 16956fed35 ("ARM: versatile: switch to DT only
booting and remove legacy code"), there's no one to use the functions
defined or declared in include/clocksource/timer-sp804.h. Delete it.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200918132237.3552-3-thunder.leizhen@huawei.com
Move the clk_get_sys() part into sp804_get_clock_rate(), cleanup the same
code.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200918132237.3552-2-thunder.leizhen@huawei.com
- Make better attempt at matching device with the correct OF node
- Allow batch removal of hierarchical sub-devices
- New Drivers
- Add STM32 Clocksource driver
- Add support for Khadas System Control Microcontroller
- Driver Removal
- Remove unused driver for TI's SMSC ECE1099
- New Device Support
- Add support for Intel Emmitsburg PCH to Intel LPSS PCI
- Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
- Add support for Dialog DA revision to Dialog DA9063
- New Functionality
- Add support for AXP803 to be probed by I2C
- Fix-ups
- Numerous W=1 warning fixes
- Device Tree changes; stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller
- Enabled Regmap 'fast I/O'; stm32-lptimer
- Change BUG_ON to WARN_ON; arizona-core
- Remove superfluous code/initialisation; madera, max14577
- Trivial formatting/spelling issues; madera-core, madera-i2c, da9055, max77693-private
- Switch to of_platform_populate(); sprd-sc27xx-spi
- Expand out set/get brightness/pwm macros; lm3533-ctrlbank
- Disable IRQs on suspend; motorola-cpcap
- Clean-up error handling; intel_soc_pmic_mrfld
- Ensure correct removal order of sub-devices; madera
- Many s/HTTP/HTTPS/ link changes
- Ensure name used with Regmap is unique; syscon
- Bug Fixes
- Properly 'put' clock on unbind and error; arizona-core
- Fix revision handling; da9063
- Fix 'assignment of read-only location' error; kempld-core
- Avoid using the Regmap API when atomic; rn5t618
- Redefine volatile register description; rn5t618
- Use locking to protect event handler; dln2
-----BEGIN PGP SIGNATURE-----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=X/Zn
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks
- Make better attempt at matching device with the correct OF node
- Allow batch removal of hierarchical sub-devices
New Drivers
- Add STM32 Clocksource driver
- Add support for Khadas System Control Microcontroller
Driver Removal
- Remove unused driver for TI's SMSC ECE1099
New Device Support
- Add support for Intel Emmitsburg PCH to Intel LPSS PCI
- Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
- Add support for Dialog DA revision to Dialog DA9063
New Functionality
- Add support for AXP803 to be probed by I2C
Fix-ups
- Numerous W=1 warning fixes
- Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller)
- Enabled Regmap 'fast I/O' in stm32-lptimer
- Change BUG_ON to WARN_ON in arizona-core
- Remove superfluous code/initialisation (madera, max14577)
- Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private)
- Switch to of_platform_populate() in sprd-sc27xx-spi
- Expand out set/get brightness/pwm macros in lm3533-ctrlbank
- Disable IRQs on suspend in motorola-cpcap
- Clean-up error handling in intel_soc_pmic_mrfld
- Ensure correct removal order of sub-devices in madera
- Many s/HTTP/HTTPS/ link changes
- Ensure name used with Regmap is unique in syscon
Bug Fixes
- Properly 'put' clock on unbind and error in arizona-core
- Fix revision handling in da9063
- Fix 'assignment of read-only location' error in kempld-core
- Avoid using the Regmap API when atomic in rn5t618
- Redefine volatile register description in rn5t618
- Use locking to protect event handler in dln2"
* tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
mfd: syscon: Use a unique name with regmap_config
mfd: Replace HTTP links with HTTPS ones
mfd: dln2: Run event handler loop under spinlock
mfd: madera: Improve handling of regulator unbinding
mfd: mfd-core: Add mechanism for removal of a subset of children
mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
mfd: max14577: Remove redundant initialization of variable current_bits
mfd: rn5t618: Fix caching of battery related registers
mfd: max77693-private: Drop a duplicated word
mfd: da9055: pdata.h: Drop a duplicated word
mfd: rn5t618: Make restart handler atomic safe
mfd: kempld-core: Fix 'assignment of read-only location' error
mfd: axp20x: Allow the AXP803 to be probed by I2C
mfd: da9063: Add support for latest DA silicon revision
mfd: da9063: Fix revision handling to correctly select reg tables
dt-bindings: mfd: st,stmfx: Remove I2C unit name
dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
mfd: motorola-cpcap: Disable interrupt for suspend
mfd: smsc-ece1099: Remove driver
mfd: core: Add OF_MFD_CELL_REG() helper
...
- Prevent unnecessary timer softirq invocations by extending the tracking
of the next expiring timer in the timer wheel beyond the existing NOHZ
functionality. The tracking overhead at enqueue time is within the
noise, but on sensitive workloads the avoidance of the soft interrupt
invocation is a measurable improvement.
- The obligatory new clocksource driver for Ingenic X100 OST
- The usual fixes, improvements, cleanups and extensions for newer chip
variants all over the driver space.
-----BEGIN PGP SIGNATURE-----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=uJnp
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Time, timers and related driver updates:
- Prevent unnecessary timer softirq invocations by extending the
tracking of the next expiring timer in the timer wheel beyond the
existing NOHZ functionality.
The tracking overhead at enqueue time is within the noise, but on
sensitive workloads the avoidance of the soft interrupt invocation
is a measurable improvement.
- The obligatory new clocksource driver for Ingenic X100 OST
- The usual fixes, improvements, cleanups and extensions for newer
chip variants all over the driver space"
* tag 'timers-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
timers: Recalculate next timer interrupt only when necessary
clocksource/drivers/ingenic: Add support for the Ingenic X1000 OST.
dt-bindings: timer: Add Ingenic X1000 OST bindings.
clocksource/drivers: Replace HTTP links with HTTPS ones
clocksource/drivers/nomadik-mtu: Handle 32kHz clock
clocksource/drivers/sh_cmt: Use "kHz" for kilohertz
clocksource/drivers/imx: Add support for i.MX TPM driver with ARM64
clocksource/drivers/ingenic: Add high resolution timer support for SMP/SMT.
timers: Lower base clock forwarding threshold
timers: Remove must_forward_clk
timers: Spare timer softirq until next expiry
timers: Expand clk forward logic beyond nohz
timers: Reuse next expiry cache after nohz exit
timers: Always keep track of next expiry
timers: Optimize _next_timer_interrupt() level iteration
timers: Add comments about calc_index() ceiling work
timers: Move trigger_dyntick_cpu() to enqueue_timer()
timers: Use only bucket expiry for base->next_expiry value
timers: Preserve higher bits of expiration on index calculation
clocksource/drivers/timer-atmel-tcb: Add sama5d2 support
...
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=7P/h
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull timer fix from Ingo Molnar:
"Fix a suspend/resume regression (crash) on TI AM3/AM4 SoC's"
* tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4
- Add the high resolution support for SMP/SMT on the Ingenic timer (Zhou Yanjie)
- Add support for i.MX TPM driver with ARM64 (Anson Huang)
- Fix typo by replacing KHz to kHz (Geert Uytterhoeven)
- Add 32kHz support by setting the minimum ticks to 5 on Nomadik MTU (Linus Walleij)
- Replace HTTP links with HTTPS ones for security reasons (Alexander A. Klimov)
- Add support for the Ingenic X1000 OST (Zhou Yanjie)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl8ZqeUACgkQqDIjiipP
6E9tawf/UGUhEfB+VmH9w60NJlM0fC5a/TjVOb4yMjTZjjdyd4zMBHemF+dqMNnw
wTr+S8U9QfvP4BDgg1hWV+vhAwxz2xkhR0cGtOQjck5322vZglGSmAVqTCAlQMoZ
LNm98XeUYYVNMB+/+BHkf8F/nHV9vRo8sJg7UnvX/6RCykXFYXVP+P8LfkAU1MPt
8vaRPCcyGnYXrgjDYY5M5qYudLNpFPrzr1yJDWdwWUliwH3T1X1FNogTdUo955qk
wM+Hb4yPRuRufM+yATPsRedQypZFpoWFObuEMD2FaIw/LZVxV7D1tmw5KhL2V1tZ
XSzNiJDEgri/4LaVzXKP7sVlQlZfDQ==
=DXTp
-----END PGP SIGNATURE-----
Merge tag 'timers-v5.9' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clock event/surce driver changes from Daniel Lezcano:
- Add sama5d2 support and rework the 32kHz clock handling (Alexandre Belloni)
- Add the high resolution support for SMP/SMT on the Ingenic timer (Zhou Yanjie)
- Add support for i.MX TPM driver with ARM64 (Anson Huang)
- Fix typo by replacing KHz to kHz (Geert Uytterhoeven)
- Add 32kHz support by setting the minimum ticks to 5 on Nomadik MTU (Linus Walleij)
- Replace HTTP links with HTTPS ones for security reasons (Alexander A. Klimov)
- Add support for the Ingenic X1000 OST (Zhou Yanjie)
X1000 and SoCs after X1000 (such as X1500 and X1830) had a separate
OST, it no longer belongs to TCU. This driver will register both a
clocksource and a sched_clock to the system.
Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200722171804.97559-3-zhouyanjie@wanyeetech.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200708165856.15322-1-grandmaster@al2klimov.de
It happens on the U8420-sysclk Ux500 PRCMU firmware
variant that the MTU clock is just 32768 Hz, and in this
mode the minimum ticks is 5 rather than two.
I think this is simply so that there is enough time
for the register write to propagate through the
interconnect to the registers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200628220153.67011-1-linus.walleij@linaro.org
Enable clock event handling on per CPU core basis. Make sure that
interrupts raised on the first core execute event handlers on the
correct CPU core. This driver is required by Ingenic processors
that support SMP/SMT, such as JZ4780 and X2000.
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200624170749.31762-2-zhouyanjie@wanyeetech.com
Carlos Hernandez <ceh@ti.com> reported that we now have a suspend and
resume regresssion on am3 and am4 compared to the earlier kernels. While
suspend and resume works with v5.8-rc3, we now get errors with rtcwake:
pm33xx pm33xx: PM: Could not transition all powerdomains to target state
...
rtcwake: write error
This is because we now fail to idle the system timer clocks that the
idle code checks and the error gets propagated to the rtcwake.
Turns out there are several issues that need to be fixed:
1. Ignore no-idle and no-reset configured timers for the ti-sysc
interconnect target driver as otherwise it will keep the system timer
clocks enabled
2. Toggle the system timer functional clock for suspend for am3 and am4
(but not for clocksource on am3)
3. Only reconfigure type1 timers in dmtimer_systimer_disable()
4. Use of_machine_is_compatible() instead of of_device_is_compatible()
for checking the SoC type
Fixes: 52762fbd1c ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Reported-by: Carlos Hernandez <ceh@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Carlos Hernandez <ceh@ti.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200713162601.6829-1-tony@atomide.com
The first divisor for the sama5d2 is actually the gclk selector. Because
the currently remaining divisors are fitting the use case, currently ensure
it is skipped.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200710230813.1005150-10-alexandre.belloni@bootlin.com
The divider selection algorithm never allowed to get index 0. It was also
continuing to look for dividers, trying to find the slow clock selection.
This is not necessary anymore.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200710230813.1005150-9-alexandre.belloni@bootlin.com
Stop using the slow clock as the clock source for 32 bit counters because
even at 10MHz, they are able to handle delays up to two minutes. This
provides a way better resolution.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200710230813.1005150-8-alexandre.belloni@bootlin.com
Use the tcb_config and struct atmel_tcb_config to get the timer counter
width. This is necessary because atmel_tcb_config will be extended later
on.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200710230813.1005150-7-alexandre.belloni@bootlin.com
On all the supported SoCs, the slow clock is always ATMEL_TC_TIMER_CLOCK5,
avoid looking it up and pass it directly to setup_clkevents.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200710230813.1005150-6-alexandre.belloni@bootlin.com
ARM64_WORKAROUND_1418040 requires that AArch32 EL0 accesses to
the virtual counter register are trapped and emulated by the kernel.
This makes the vdso pretty pointless, and in some cases livelock
prone.
Provide a workaround entry that limits the vdso to 64bit tasks.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200706163802.1836732-4-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
As we are about to disable the vdso for compat tasks in some circumstances,
let's allow a workaround descriptor to express exactly that.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200706163802.1836732-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Implement clock event driver using low power STM32 timers.
Low power timer counters running even when CPUs are stopped.
It could be used as clock event broadcaster to wake up CPUs but not like
a clocksource because each it rise an interrupt the counter restart from 0.
Low power timers have a 16 bits counter and a prescaler which allow to
divide the clock per power of 2 to up 128 to target a 32KHz rate.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Instead of directly calling RISC-V timer interrupt handler from
RISC-V local interrupt conntroller driver, this patch implements
RISC-V timer interrupt as a per-CPU interrupt using per-CPU APIs
of Linux IRQ subsystem.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The commit 4f41fe386a ("clocksource/drivers/timer-probe: Avoid
creating dead devices") broke the handling of arm,vexpress-sysreg [1].
The arm,vexpress-sysreg device is handled by both timer-versatile.c and
drivers/mfd/vexpress-sysreg.c. While the timer driver doesn't use the
device, the mfd driver still needs a device to probe.
So, this patch clears the OF_POPULATED flag to continue creating the
device.
[1] - https://lore.kernel.org/lkml/20200324175955.GA16972@arm.com/
Fixes: 4f41fe386a ("clocksource/drivers/timer-probe: Avoid creating dead devices")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200324195302.203115-1-saravanak@google.com
Currently clocksource framework doesn't support the clocks with variable
frequency. Since MIPS GIC timer ticks rate might be unstable on some
platforms, we must make sure that it justifies the clocksource
requirements. MIPS GIC timer is incremented with the CPU cluster reference
clocks rate. So in case if CPU frequency changes, the MIPS GIC tick rate
changes synchronously. Due to this the clocksource subsystem can't rely on
the timer to measure system clocks anymore. This commit marks the MIPS GIC
based clocksource as unstable if reference clock (normally it's a CPU
reference clocks) rate changes. The clocksource will execute a watchdog
thread, which lowers the MIPS GIC timer rating to zero and fallbacks to a
new stable one.
Note we don't need to set the CLOCK_SOURCE_MUST_VERIFY flag to the MIPS
GIC clocksource since normally the timer is stable. The only reason why
it gets unstable is due to the ref clock rate change, which event we
detect here in the driver by means of the clocks event notifier.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-9-Sergey.Semin@baikalelectronics.ru
The MIPS GIC timer is well suited for use as sched_clock, so register it
as such.
Whilst the existing gic_read_count() function matches the prototype
needed by sched_clock_register() already, we split it into 2 functions
in order to remove the need to evaluate the mips_cm_is64 condition
within each call since sched_clock should be as fast as possible.
Note the sched clock framework needs the clock source being stable in
order to rely on it. So we register the MIPS GIC timer as schedule clocks
only if it's, if either the system doesn't have CPU-frequency enabled or
the CPU frequency is changed by means of the CPC core clock divider
available on the platforms with CM3 or newer.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Co-developed-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
[Sergey.Semin@baikalelectronics.ru: Register sched-clock if CM3 or !CPU-freq]
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-8-Sergey.Semin@baikalelectronics.ru
Commit 1002148899 ("clocksource: dw_apb_timer_of: use
clocksource_of_init") replaced a publicly available driver
initialization method with one called by the timer_probe() method
available after CLKSRC_OF. In current implementation it traverses
all the timers available in the system and calls their initialization
methods if corresponding devices were either in dtb or in acpi. But
if before the commit any number of available timers would be installed
as clockevent and clocksource devices, after that there would be at most
two. The rest are just ignored since default case branch doesn't do
anything. I don't see a reason of such behaviour, neither the commit
message explains it. Moreover this might be wrong if on some platforms
these timers might be used for different purpose, as virtually CPU-local
clockevent timers and as an independent broadcast timer. So in order
to keep the compatibility with the platforms where the order of the
timers detection has some meaning, lets add the secondly discovered
timer to be of clocksource/sched_clock type, while the very first and
the others would provide the clockevents service.
Fixes: 1002148899 ("clocksource: dw_apb_timer_of: use clocksource_of_init")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-7-Sergey.Semin@baikalelectronics.ru
Currently any DW APB Timer device detected in OF is bound to CPU #0.
Doing so is redundant since DW APB Timer isn't CPU-local timer, but as
having APB interface is normally accessible from any CPU in the system. By
artificially affiliating the DW timer to the very first CPU we may and in
our case will make the clockevent subsystem to decline the more performant
real CPU-local timers selection in favor of in fact non-local and
accessible over a slow bus - DW APB Timers.
Let's not affiliate the of-detected DW APB Timers to any CPU. By doing so
the clockevent framework would prefer to select the real CPU-local timer
instead of DW APB one. Otherwise if there is no other than DW APB device
for clockevents tracking then it will be selected.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-6-Sergey.Semin@baikalelectronics.ru
Currently the DW APB Timer driver binds each clockevent timers to a
particular CPU. This isn't good for multiple reasons. First of all seeing
the device is placed on APB bus (which makes it accessible from any CPU
core), accessible over MMIO and having the DYNIRQ flag set we can be sure
that manually binding the timer to any CPU just isn't correct. By doing
so we just set an extra limitation on device usage. This also doesn't
reflect the device actual capability, since by setting the IRQ affinity
we can make it virtually local to any CPU. Secondly imagine if you had a
real CPU-local timer with the same rating and the same CPU-affinity.
In this case if DW APB timer was registered first, then due to the
clockevent framework tick-timer selection procedure we'll end up with the
real CPU-local timer being left unselected for clock-events tracking. But
on most of the platforms (MIPS/ARM/etc) such timers are normally embedded
into the CPU core and are accessible with much better performance then
devices placed on APB. For instance in MIPS architectures there is
r4k-timer, which is CPU-local, assigned with the same rating, and normally
its clockevent device is registered after the platform-specific one.
So in order to fix all of these issues let's make the DW APB Timer CPU
affinity being optional and deactivated by passing a negative CPU id,
which will effectively set the DW APB clockevent timer cpumask to
'cpu_possible_mask'.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-5-Sergey.Semin@baikalelectronics.ru
omap_dm_timer_prepare() is setting up the parent 32KHz clock. This
prepare() gets called by request_timer in the client's driver. Because of
this, the timer clock parent that is set with assigned-clock-parent is being
overwritten. So drop this default setting of parent in prepare().
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200427172831.16546-1-lokeshvutla@ti.com
We can get a warning for dmtimer_clocksource_init() with 'pa' set but
not used. This was used in the earlier revisions of the code but no
longer needed, so let's remove the unused pa and of_translate_address().
Let's also do it for dmtimer_clockevent_init() that has a similar issue.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200519155157.12804-1-tony@atomide.com
We can move the TI dmtimer clockevent and clocksource to live under
drivers/clocksource if we rely only on the clock framework, and handle
the module configuration directly in the clocksource driver based on the
device tree data.
This removes the early dependency with system timers to the interconnect
related code, and we can probe pretty much everything else later on at
the module_init level.
Let's first add a new driver for timer-ti-dm-systimer based on existing
arch/arm/mach-omap2/timer.c. Then let's start moving SoCs to probe with
device tree data while still keeping the old timer.c. And eventually we
can just drop the old timer.c.
Let's take the opportunity to switch to use readl/writel as pointed out
by Daniel Lezcano <daniel.lezcano@linaro.org>. This allows further
clean-up of the timer-ti-dm code the a lot of the shared helpers can
just become static to the non-syster related code.
Note the boards can optionally configure different timer source clocks
if needed with assigned-clocks and assigned-clock-parents.
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200507172330.18679-3-tony@atomide.com
Let's allow probing the 32k counter directly based on devicetree data to
prepare for dropping the related legacy platform code. Let's only do this
if the parent node is compatible with ti-sysc to make sure we have the
related devicetree data available.
Let's also show the 32k counter information before registering the
clocksource, now we see it after the clocksource information which is a
bit confusing.
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200507172330.18679-2-tony@atomide.com
The function acpi_gtdt_init() prints a message in case of
error. Remove the error message after testing if the function fails,
otherwise it is a duplicate message.
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200429153559.21189-1-zhengdejin5@gmail.com
The function arc_get_timer_clk() prints an error message if it fails,
remove the second error message if the function fails.
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200429151223.3120-1-zhengdejin5@gmail.com
Since commit 2f8a26c166 ("clocksource: Improve GENERIC_CLOCKEVENTS
dependency") all clocksource drivers depend on GENERIC_CLOCKEVENTS so
drop the redundant attribute from the RDA-timer entry which was added
later.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200513122548.16974-1-johan@kernel.org
We can get a warning for dmtimer_clocksource_init() with 'pa' set but
not used. This was used in the earlier revisions of the code but no
longer needed, so let's remove the unused pa and of_translate_address().
Let's also do it for dmtimer_clockevent_init() that has a similar issue.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200519155157.12804-1-tony@atomide.com
We can move the TI dmtimer clockevent and clocksource to live under
drivers/clocksource if we rely only on the clock framework, and handle
the module configuration directly in the clocksource driver based on the
device tree data.
This removes the early dependency with system timers to the interconnect
related code, and we can probe pretty much everything else later on at
the module_init level.
Let's first add a new driver for timer-ti-dm-systimer based on existing
arch/arm/mach-omap2/timer.c. Then let's start moving SoCs to probe with
device tree data while still keeping the old timer.c. And eventually we
can just drop the old timer.c.
Let's take the opportunity to switch to use readl/writel as pointed out
by Daniel Lezcano <daniel.lezcano@linaro.org>. This allows further
clean-up of the timer-ti-dm code the a lot of the shared helpers can
just become static to the non-syster related code.
Note the boards can optionally configure different timer source clocks
if needed with assigned-clocks and assigned-clock-parents.
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200507172330.18679-3-tony@atomide.com
Let's allow probing the 32k counter directly based on devicetree data to
prepare for dropping the related legacy platform code. Let's only do this
if the parent node is compatible with ti-sysc to make sure we have the
related devicetree data available.
Let's also show the 32k counter information before registering the
clocksource, now we see it after the clocksource information which is a
bit confusing.
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200507172330.18679-2-tony@atomide.com
The timer-versatile driver provides a sched_clock for certain Arm Ltd.
reference platforms. Specifically, it is used on Versatile and 32-bit
VExpress. It is not needed for those platforms with an arch timer (all
the 64-bit ones) yet CONFIG_MFD_VEXPRESS_SYSREG does still need to be
enabled. In that case, the timer-versatile can only be disabled when
COMPILE_TEST is enabled which is not desirable. Let's use the sub-arch
kconfig symbols instead.
Realview platforms don't have the sysregs that this driver uses so
correct the help text.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200417212045.16917-1-robh@kernel.org
This driver is an OF driver, it depends on OF, and uses
TIMER_OF_DECLARE, so it should select CONFIG_TIMER_OF.
Without CONFIG_TIMER_OF enabled this can lead to warnings such as:
powerpc-linux-ld: warning: orphan section `__timer_of_table' from
`drivers/clocksource/timer-microchip-pit64b.o' being placed in
section `__timer_of_table'.
Because TIMER_OF_TABLES in vmlinux.lds.h doesn't emit anything into
the linker script when CONFIG_TIMER_OF is not enabled.
Fixes: 625022a5f1 ("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support")
Cc: stable@vger.kernel.org # v5.6+
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200426124356.3929682-1-mpe@ellerman.id.au
Fix the following coccicheck warning:
drivers/clocksource/timer-atmel-st.c:142:6-12: Unneeded variable:
"status". Return "0" on line 166
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200414120238.35704-1-yanaijie@huawei.com
