The default mode for SSP configuration is TDM 4 slot and so far we were
using this for the bus format on cht-bsw-rt56732 boards.
One board, the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2.
The second piggy-backed, output-only codec is inside the keyboard-dock
(which has extra speakers). Unlike the main rt5672 codec, we cannot
configure this codec, it is hard coded to use 2 channel 24 bit I2S.
Using 4 channel TDM leads to the dock speakers codec (which listens in on
the data send from the SSP to the rt5672 codec) emiting horribly distorted
sound.
Since we only support 2 channels anyways, there is no need for TDM on any
cht-bsw-rt5672 designs. So we can simply use I2S 2ch everywhere.
This commit fixes the Lenovo Miix 2 10 dock speakers issue by changing
the bus format set in cht_codec_fixup() to I2S 2 channel.
This change has been tested on the following devices with a rt5672 codec:
Lenovo Miix 2 10
Lenovo Thinkpad 8
Lenovo Thinkpad 10 (gen 1)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723
Link: https://lore.kernel.org/r/20200628155231.71089-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When building on allyesconfig kernel for a NO_DMA=y platform (e.g.
Sun-3), CONFIG_SND_SOC_QCOM_COMMON=y, but CONFIG_SND_SOC_QDSP6_AFE=n,
leading to a link failure:
sound/soc/qcom/common.o: In function `qcom_snd_parse_of':
common.c:(.text+0x2e2): undefined reference to `q6afe_is_rx_port'
While SND_SOC_QDSP6 depends on HAS_DMA, SND_SOC_MSM8996 and SND_SOC_SDM845
don't, so the following warning is seen:
WARNING: unmet direct dependencies detected for SND_SOC_QDSP6
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && HAS_DMA [=n]
Selected by [y]:
- SND_SOC_MSM8996 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y]
- SND_SOC_SDM845 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && CROS_EC [=y] && I2C [=y] && SOUNDWIRE [=y]
Until recently, this warning was harmless (from a compile-testing
point-of-view), but the new user of q6afe_is_rx_port() turned this into
a hard failure.
As the QDSP6 driver itself builds fine if NO_DMA=y, and it depends on
QCOM_APR (which in turns depends on ARCH_QCOM || COMPILE_TEST), it is
safe to increase compile testing coverage. Hence fix the link failure
by dropping the HAS_DMA dependency of SND_SOC_QDSP6.
Fixes: a212008925 ("ASoC: qcom: common: set correct directions for dailinks")
Fixes: 6b1687bf76 ("ASoC: qcom: add sdm845 sound card support")
Fixes: a6f933f63f ("ASoC: qcom: apq8096: Add db820c machine driver")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200629122443.21736-1-geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
To turn the headphone output switch off during jack type detection, it
could avoid the pop noise when jack type switches to OMTP type.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200623125312.27896-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because clk_prepare_enable and clk_disable_unprepare should
check input clock parameter is NULL or not internally, then
we don't need to check them before calling the function.
Fixes: 9e28f6532c ("ASoC: fsl_mqs: Add MQS component driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/743be216bd504c26e8d45d5ce4a84561b67a122b.1592888591.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.
Fixes: fc05a5b222 ("ASoC: rockchip: add support for pdm controller")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200613205158.27296-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
The steps to reproduce:
Record from the internal mic :
(arecord -D hw:1,2 -f dat /dev/null -V stereos)
Record from the headphone mic:
(arecord -D hw:1,0 -f dat /dev/null -V stereos)
Kill the recording from internal mic.
We can see the recording from the headphone mic is broken.
This patch rectifies the issue reported.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200618072653.27103-1-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kmemleak throws error reports on module load/unload tests, add
snd_hdac_regmap_exit() in .remove().
While we are at it, also fix the error handling flow in .probe() to
use snd_hdac_regmap_exit() if needed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200617164144.17859-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Usually the DSP is not traditionally enabled on H skews but this might
be used moving forward.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200617164755.18104-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mirror ID added for legacy HDaudio
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200617164755.18104-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We already have two configurations for CometLake, and a third one
coming. On other platforms, we used a single Kconfig option, so we
should follow the same trend by merging the two cases in a backwards
compatible way.
The backwards compatibility is handled by overloading the COMETLAKE_LP
kconfig as COMETLAKE. In practice we've never seen a case where
COMETLAKE_H is not selected along with COMETLAKE_LP, so keeping one
of the two is enough.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200617164755.18104-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For mono channel, SSI will switch to Normal mode.
In Normal mode and Network mode, the Word Length Control bits
control the word length divider in clock generator, which is
different with I2S Master mode (the word length is fixed to
32bit), it should be the value of params_width(hw_params).
The condition "slots == 2" is not good for I2S Master mode,
because for Network mode and Normal mode, the slots can also
be 2. Then we need to use (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK)
to check if it is I2S Master mode.
So we refine the formula for mono channel, otherwise there
will be sound issue for S24_LE.
Fixes: b0a7043d5c ("ASoC: fsl_ssi: Caculate bit clock rate using slot number and width")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/034eff1435ff6ce300b6c781130cefd9db22ab9a.1592276147.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset fixes a memory allocation issue and removes a 100%
reproducible use-after-free report thrown by KASAN in automated module
removal tests across multiple platforms.
All the credit goes to Bard Liao for root-causing the issue. DAIs may
be registered at the same time as a component, or when the topology is
loaded. This two-step registration causes the memory for
topology-based DAIs to allocated last, and conversely to be released
first by devres, before the component is released and the DAIs removed
from the component DAI list with snd_soc_unregister_dais().
When we remove a component, by the time we walk through its dai list
to unregister all dais, the dais allocated by the topology have been
freed already by devres and the list is corrupted with pointers that
are no longer valid.
The suggestion is to add an explicit devm_ based registration for
topology-based dais, so that each dai is cleanly removed from the
component dai list in the release operation before devres releases the
allocated memory.
Pierre-Louis Bossart (2):
ASoC: soc-devres: add devm_snd_soc_register_dai()
ASoC: soc-topology: use devm_snd_soc_register_dai()
include/sound/soc.h | 4 ++++
sound/soc/soc-devres.c | 37 +++++++++++++++++++++++++++++++++++++
sound/soc/soc-topology.c | 3 +--
3 files changed, 42 insertions(+), 2 deletions(-)
--
2.20.1
Port commit 6d011d5057 ("ALSA: hda: Clear RIRB status before reading
WP") from legacy HDA driver to fix the get response timeout issue.
Current SOF driver does not suffer from this issue because sync write
is enabled in hda_init. The issue will come back if the sync write is
disabled for some reason.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1591959048-15813-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently both FE and BE dai-links are configured bi-directional,
However the DSP BE dais are only single directional,
so set the directions as supported by the BE dais.
Fixes: c25e295cd7 (ASoC: qcom: Add support to parse common audio device nodes)
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200612123711.29130-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to q6afe_is_rx_port() to get direction
of DSP BE dai port, this is useful for setting dailink
directions correctly.
Fixes: c25e295cd7 (ASoC: qcom: Add support to parse common audio device nodes)
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200612123711.29130-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_dpcm_fe_runtime_update() is called for all dailinks, and we want
to first discard all back-ends, then deal with front-ends.
The existing code first reports an error with multi-cpu front-ends,
and that check needs to be moved after we know that we are dealing
with a front-end.
Fixes: 6e1276a5e6 ('ASoC: Return error if the function does not support multi-cpu')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/1970
Link: https://lore.kernel.org/r/20200612203507.25621-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to ideal rt5682 CCF, the root clk is mclk.
But in some platforms, mclk is not exported to CCF.
In this condition, rt5682_register_dai_clks will not be called.
This patch lets dai clks could be registered whether mclk exists or not.
Signed-off-by: derek.fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1591938925-1070-5-git-send-email-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The registration of DAIs may be done at two distinct times, once
during a component registration and later when loading a
topology. Since devm_ managed resources are freed in the reverse order
they were allocated, when a component starts unregistering DAIs by
walking through the DAI list, the memory allocated for the
topology-registered DAIs was freed already, which leads to 100%
reproducible KASAN use-after-free reports.
This patch suggests a new devm_ function to force the DAI list to be
updated prior to freeing the memory chunks referenced by the list
pointers.
Suggested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/2186
Link: https://lore.kernel.org/r/20200612205938.26415-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With EDMA, there is two dma channels can be used for dev_to_dev,
one is from ASRC, one is from another peripheral (ESAI or SAI).
If we select the dma channel of ASRC, there is an issue for ideal
ratio case, the speed of copy data is faster than sample
frequency, because ASRC output data is very fast in ideal ratio
mode.
So it is reasonable to use the dma channel of Back-End peripheral.
then copying speed of DMA is controlled by data consumption
speed in the peripheral FIFO,
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/424ed6c249bafcbe30791c9de0352821c5ea67e2.1591947428.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dma channel has been requested by Back-End cpu dai driver already.
If fsl_asrc_dma requests dma chan with same dma:tx symlink, then
there will be below warning with SDMA.
[ 48.174236] fsl-esai-dai 2024000.esai: Cannot create DMA dma:tx symlink
So if we can reuse the dma channel of Back-End, then the issue can be
fixed.
In order to get the dma channel which is already requested in Back-End.
we use the exported two functions (snd_soc_lookup_component_nolocked
and soc_component_to_pcm). If we can get the dma channel, then reuse it,
if can't, then request a new one.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/3a79f0442cb4930c633cf72145cfe95a45b9c78e.1591947428.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_lookup_component_nolocked can be used for the DPCM case
that Front-End needs to get the unused platform component but
added by Back-End cpu dai driver.
If the component is gotten, then we can get the dma chan created
by Back-End component and reused it in Front-End.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/55f6e0d76f67a517b9a44136d790ff2a06b5caa8.1591947428.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Successful send of EOS command does not indicate that EOS is actually
finished, correct event to wait EOS is finished is EOS_RENDERED event.
EOS_RENDERED means that the DSP has finished processing all the buffers
for that particular session and stream.
This patch fixes EOS handling!
Fixes: 68fd8480bb ("ASoC: qdsp6: q6asm: Add support to audio stream apis")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200611124159.20742-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We've had a couple of changes that introduce regressions with the
multi-cpu DAI solutions, and while trying to fix them we found
additional inconsistencies that should also go to stable branches.
Bard Liao (1):
ASoC: core: only convert non DPCM link to DPCM link
Pierre-Louis Bossart (3):
ASoC: soc-pcm: dpcm: fix playback/capture checks
ASoC: Intel: boards: replace capture_only by dpcm_capture
ASoC: SOF: nocodec: conditionally set dpcm_capture/dpcm_playback flags
sound/soc/intel/boards/glk_rt5682_max98357a.c | 2 +-
sound/soc/intel/boards/kbl_da7219_max98927.c | 4 +-
sound/soc/intel/boards/kbl_rt5663_max98927.c | 2 +-
.../intel/boards/kbl_rt5663_rt5514_max98927.c | 2 +-
sound/soc/soc-core.c | 22 ++++++++--
sound/soc/soc-pcm.c | 44 ++++++++++++++-----
sound/soc/sof/nocodec.c | 6 ++-
7 files changed, 62 insertions(+), 20 deletions(-)
base-commit: 8a9144c1cf
--
2.20.1
The Asus T101HA uses the default jack-detect mode 3, but instead of
using an analog microphone it is using a DMIC on dmic-data-pin 1,
like the Asus T100HA. Note unlike the T100HA its jack-detect is not
inverted.
Add a DMI quirk with the correct settings for this model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200608204634.93407-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Toshiba Encore WT10-A tablet almost fully works with the default
settings for Bay Trail CR devices. The only issue is that it uses a
digital mic. connected the the DMIC1 input instead of an analog mic.
Add a quirk for this model using the default settings with the input-map
replaced with BYT_RT5640_DMIC1_MAP.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200608204634.93407-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With additional checks on dailinks, we see errors such as
[ 3.000418] sof-nocodec sof-nocodec: CPU DAI DMIC01 Pin for rtd
NoCodec-6 does not support playback
It's not clear why we set the dpcm_playback and dpcm_capture flags
unconditionally, add a check on number of channels for each direction
to avoid invalid configurations.
Fixes: 8017b8fd37 ('ASoC: SOF: Add Nocodec machine driver support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608194415.4663-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's not clear why specific FE dailinks use capture_only flags, likely
blind copy/paste from Chromebook driver to the other. Replace by
dpcm_capture, this will make future alignment and removal of flags
easier.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608194415.4663-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Additional checks for valid DAIs expose a corner case, where existing
BE dailinks get modified, e.g. HDMI links are tagged with
dpcm_capture=1 even if the DAIs are for playback.
This patch makes those changes conditional and flags configuration
issues when a BE dailink is has no_pcm=0 but dpcm_playback or
dpcm_capture=1 (which makes no sense).
As discussed on the alsa-devel mailing list, there are redundant flags
for dpcm_playback, dpcm_capture, playback_only, capture_only. This
will have to be cleaned-up in a future update. For now only correct
and flag problematic configurations.
Fixes: 218fe9b7ec ("ASoC: soc-core: Set dpcm_playback / dpcm_capture")
Suggested-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200608194415.4663-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent changes in the ASoC core prevent multi-cpu BE dailinks from
being used. DPCM does support multi-cpu DAIs for BE Dailinks, but not
for FE.
Handle the FE checks first, and make sure all DAIs support the same
capabilities within the same dailink.
Fixes: 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
BugLink: https://github.com/thesofproject/linux/issues/2031
Link: https://lore.kernel.org/r/20200608194415.4663-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
free_irq() is missing in case of error, fix that.
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200606153103.GA17905@amd
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently if the allocation of ldata fails the error return path
does not kfree the allocated links object. Fix this by adding
an error exit return path that performs the necessary kfree'ing.
Fixes: 7864a79f37 ("ASoC: meson: add axg sound card support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Resource leak")
Link: https://lore.kernel.org/r/20200604171216.60043-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
malformed firmware file can cause out-of-bound access and crash
during dsm_param bin loading.
- add MIN/MAX param size to avoid out-of-bound access.
- read start addr and size of param and check bound.
- add condition that fw->size > param_size + _PAYLOAD_OFFSET
to confirm enough data.
Signed-off-by: Steve Lee <steves.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20200604054731.21140-1-steves.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch addresses a compile warning:
sound/soc/codecs/max98390.c:781:3: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘size_t {aka const unsigned int}’ [-Wformat=]
Fixes: a6e3f4f34c ("ASoC: max98390: Added Amplifier Driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200602164453.29925-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Some DMIC components will not work correctly in the clock rate 3.072MHz.
We recommend the clock rate 1.536MHz in the gerenal case.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200604071016.3981-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu5szv2h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
This patch adds missing return when error case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8q8zv2m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pnaozv2s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sgfkzv4g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87tv00zv4p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
card has "card->probe" and "card->late_probe" callbacks,
and "late_probe" callback is called after "probe".
This means, we can set "card->probed" flag afer "late_probe"
for all cases.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87v9kgzv4w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
One note here is that card has "card->probe" and "card->late_probe"
callbacks.
Because it needs to care "late_probe", "card->probed" flag is set
under if (card->probe) at snd_soc_card_probe().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87wo4wzv54.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
