We repeatedly (and more so in future) use the same looping construct
over the mocs definition table to setup the register state. Refactor the
loop construct into a reusable macro.
add/remove: 2/1 grow/shrink: 1/2 up/down: 113/-330 (-217)
Function old new delta
intel_mocs_init_engine.cold - 71 +71
offset - 28 +28
__func__ 17273 17287 +14
intel_mocs_init 143 113 -30
mocs_register.isra 91 - -91
intel_mocs_init_engine 503 294 -209
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112223600.30993-3-chris@chris-wilson.co.uk
Be consistent in our mocs setup on Tigerlake and set the unused control
value to follow the PTE entry as we previously have done. The unused
values are beyond the defines of the ABI, the consistency simplifies our
checking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112223600.30993-1-chris@chris-wilson.co.uk
fbdev uses the physical address of our framebuffer for its fb_mmap()
routine. While we need to adapt this address for the new io BAR, we have
to fix v5.4 first! The simplest fix is to restore the smem back to v5.3
and we will then probably have to implement our fbops->fb_mmap() callback
to handle local memory.
Reported-by: Neil MacLeod <freedesktop@nmacleod.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112256
Fixes: 5f889b9a61 ("drm/i915: Disregard drm_mode_config.fb_base")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Neil MacLeod <freedesktop@nmacleod.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113180633.3947-1-chris@chris-wilson.co.uk
drivers/gpu/drm/vmwgfx/vmwgfx_surface.c:339:22:
warning: variable srf set but not used [-Wunused-but-set-variable]
'srf' is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Drivers like vmwgfx may want to test whether the dma page pool is present
or not. Since it's activated by default by TTM if compiled-in, define a
hidden configuration option that the driver can test for.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
I'm observing incoherence metric values, changing from run to run.
It appears the patches introducing noa wait & reconfiguration from
command stream switched places in the series multiple times during the
review. This lead to the dependency of one onto the order to go
missing...
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 15d0ace1f8 ("drm/i915/perf: execute OA configuration from command stream")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113154639.27144-1-lionel.g.landwerlin@intel.com
This backmerges the branch that ended up in Linus' tree. It removes
all the changes for the rc6 patches from Linus' tree in favour of
a patch that is based on a large refactor that occured.
Otherwise it all looks good.
Signed-off-by: Dave Airlie <airlied@redhat.com>
In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.
v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
change.
v5:
- Rebased on latest upstream gt_pm refactoring.
v6:
- s/i915_rc6_/intel_rc6_/
- Don't return a value from i915_rc6_ctx_wa_check().
v7:
- Rebased on latest gt rc6 refactoring.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
[airlied: pull this later version of this patch into drm-next
to make resolving the conflict mess easier.]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Extend disabling SAMPLER_STATE prefetch workaround to gen12.
v2: Limit the WA to TGL A0 and update the WA no(Chris)
BSpec: 52890
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113231953.24853-1-radhakrishna.sripada@intel.com
io_mapping_map_atomic/kmap_atomic are occasionally taken in error capture
(if there is no aperture preallocated for the use of error capture), but
the error capture and compression routines are now run in normal
context:
<3> [113.316247] BUG: sleeping function called from invalid context at mm/page_alloc.c:4653
<3> [113.318190] in_atomic(): 1, irqs_disabled(): 0, pid: 678, name: debugfs_test
<4> [113.319900] no locks held by debugfs_test/678.
<3> [113.321002] Preemption disabled at:
<4> [113.321130] [<ffffffffa02506d4>] i915_error_object_create+0x494/0x610 [i915]
<4> [113.327259] Call Trace:
<4> [113.327871] dump_stack+0x67/0x9b
<4> [113.328683] ___might_sleep+0x167/0x250
<4> [113.329618] __alloc_pages_nodemask+0x26b/0x1110
<4> [113.334614] pool_alloc.constprop.19+0x14/0x60 [i915]
<4> [113.335951] compress_page+0x7c/0x100 [i915]
<4> [113.337110] i915_error_object_create+0x4bd/0x610 [i915]
<4> [113.338515] i915_capture_gpu_state+0x384/0x1680 [i915]
However, it is not a good idea to run the slow compression inside atomic
context, so we choose not to.
Fixes: 895d8ebeaa ("drm/i915: error capture with no ggtt slot")
Signed-off-by: Bruce Chang <yu.bruce.chang@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113231104.24208-1-yu.bruce.chang@intel.com
Tiger Lake supports HDMI on port A. For other platforms we ignore what
the VBT says regarding HDMI to workaround broken VBTs, see
commit 2ba7d7e043 ("drm/i915/bios: ignore HDMI on port A"). Make this
apply gen12+ so they inherit the TGL behavior.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113021935.41547-1-lucas.demarchi@intel.com
This register was being enabled after enable TRANS_DDI_FUNC_CTL and
PIPECONF/TRANS_CONF while BSpec states that it should be set when
enabling TRANS_DDI_FUNC_CTL.
BSpec: 49190
BSpec: 22243
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107214559.77087-3-jose.souza@intel.com
Adding pipe D support to DSI transcoder.
Not adding it for EDP transcoder code paths as only TGL has 4 pipes
and it do not have a EDP transcoder.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107214559.77087-2-jose.souza@intel.com
TRANS_DDI_MST_TRANSPORT_SELECT is 2 bits wide not 3, it was taking
one bit from EDP/DSI Input Select.
Fixes: b3545e0868 ("drm/i915/tgl: add support to one DP-MST stream")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107214559.77087-1-jose.souza@intel.com
If a process is interrupted while accessing the "gpu" debugfs file and
the drm device struct_mutex is contended, release() could return early
and fail to free related resources.
Note that the return value from release() is ignored.
Fixes: 4f776f4511 ("drm/msm/gpu: Convert the GPU show function to use the GPU state")
Cc: stable <stable@vger.kernel.org> # 4.18
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010131333.23635-2-johan@kernel.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl3IqJQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGOiUH+gOEDwid5OODaFAd
CggXugdFIlBZefKqGVNW5sjgX8pxFWHXuEMC8iNb6QXtQZdFrI6LFf9hhUDmzQtm
6y1LPxxEiTZjObMEsBNylb7tyzgujFHcAlp0Zro3w/HLCqmYTSP3FF46i2u6KZfL
XhkpM4X7R7qxlfpdhlfESv/ElRGocZe6SwXfC7pcPo5flFcmkdu9ijqhNd/6CZ/h
Nf9rTsD/wEDVUelFbgVN+LJzlaB0tsyc4Zbof07n8OsFZjhdEOop8gfM/kTBLcyY
6bh66SfDScdsNnC/l8csbPjSZRx+i+nQs67DyhGNnsSAFgHBZdC4Tb/2mDCwhCLR
dUvuYZc=
=1N6F
-----END PGP SIGNATURE-----
Merge v5.4-rc7 into drm-next
We have the i915 security fixes to backmerge, but first
let's clear the decks for other drivers to avoid a bigger
mess.
Signed-off-by: Dave Airlie <airlied@redhat.com>
When we call intel_bios_is_valid_vbt(), size may not actually be the
size of the VBT, but rather the size of the blob the VBT is contained
in. For example, when mapping the PCI oprom, size will be the entire
oprom size. We don't want to read beyond what is reported to be the
VBT. So make sure we vbt->vbt_size makes sense and use that for
the latter checks.
v2: check for vbt_size after checking for vbt signature and give it a
more meaningful error message (from Jani)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108003602.33526-3-lucas.demarchi@intel.com
Still the saga of the hsw live_blt incoherency continues. While it did
seem that the invalidate before the breadcrumb had improved the mtbf,
nevertheless live_blt still failed. Mika's next idea was to pull the
invalidate-stall into the breadcrumb write itself.
References: 860afa0868 ("drm/i915/gt: Flush gen7 even harder")
References: https://bugs.freedesktop.org/show_bug.cgi?id=112147
Testcase: igt/i915_selftest/live_blt
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113151956.32242-1-chris@chris-wilson.co.uk
The bspec was just updated with a minor correction to entry 61 (it
shouldn't have had the SCF bit set).
v2:
- Add a MOCS_ENTRY_UNUSED() and use it to declare the
explicitly-reserved MOCS entries. (Lucas)
- Move the warning suppression from the Makefile to a #pragma that only
affects the TGL table. (Lucas)
v3:
- Entries 16 and 17 are identical to ICL now, so no need to explicitly
adjust them (or mess with compiler warning overrides).
Bspec: 45101
Fixes: 2ddf992179 ("drm/i915/tgl: Define MOCS entries for Tigerlake")
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-2-matthew.d.roper@intel.com
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
This reverts commit f4071997f1.
These extra EHL entries won't behave as expected without a bit more work
on the kernel side so let's drop them until that kernel work has had a
chance to land. Userspace trying to use these new entries won't get the
advantage of the new functionality these entries are meant to provide,
but at least it won't misbehave.
When we do add these back in the future, we'll probably want to
explicitly use separate tables for ICL and EHL so that userspace
software that mistakenly uses these entries (which are undefined on ICL)
sees the same behavior it sees with all the other undefined entries.
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v5.3+
Fixes: f4071997f1 ("drm/i915/ehl: Update MOCS table for EHL")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-1-matthew.d.roper@intel.com
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
The setting of MSA is done by the DDI .pre_enable() hook. And when we are
using MST, the MSA is only set to first mst stream by calling of
DDI .pre_eanble() hook. It raies issues to non-first mst streams.
Wrong MSA or missed MSA packets might show scrambled screen or wrong
screen.
This splits a setting of MSA to MST and SST cases. And In the MST case it
will call a setting of MSA after an allocating of Virtual Channel from
MST encoder pre_enable callback.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112212
Fixes: 0c06fa1560 ("drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA")
Fixes: d4a415dcda ("drm/i915: Fix MST oops due to MSA changes")
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106212636.502471-1-gwan-gyeong.mun@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
[vsyrjala: nuke spurious newline]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit bd8c9cca88)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113125241.20547-1-ville.syrjala@linux.intel.com
According to internal documents I found for CMP PCHs the PCI ID 0xA3C1
belongs to a CMP-V chipset. Based on the same docs the programming of
the PCH is compatible with that of KBP. Fix up my previous wrong
assumption accordingly using the SPT programming which in turn is the
basis for KBP.
The original bug reporter verified that this is the correct PCH
identification (the only way we'll program valid DDC pin-pair values to
the GMBUS register) and the Windows team uses the same identification
(that is using the KBP programming model for this PCH).
I filed the necessary Bspec update requests (BSpec/33734).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112051
Fixes: 37c92dc303 ("drm/i915: Add new CNL PCH ID seen on a CML platform")
Reported-and-tested-by: Cyrus <cyrus.lien@canonical.com>
Cc: Cyrus <cyrus.lien@canonical.com>
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112104608.24587-1-imre.deak@intel.com
The gem_ctx_persistence/smoketest was detecting an odd coherency issue
inside the LRC context image; that the address of the ring buffer did
not match our associated struct intel_ring. As we set the address into
the context image when we pin the ring buffer into place before the
context is active, that leaves the question of where did it get
overwritten. Either the HW context save occurred after our pin which
would imply that our idle barriers are broken, or we overwrote the
context image ourselves. It is only in reset_active() where we dabble
inside the context image outside of a serialised path from schedule-out;
but we could equally perform the operation inside schedule-in which is
then fully serialised with the context pin -- and remains serialised by
the engine pulse with kill_context(). (The only downside, aside from
doing more work inside the engine->active.lock, was the plan to merge
all the reset paths into doing their context scrubbing on schedule-out
needs more thought.)
Fixes: d12acee84f ("drm/i915/execlists: Cancel banned contexts on schedule-out")
Testcase: igt/gem_ctx_persistence/smoketest
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-3-chris@chris-wilson.co.uk
(cherry picked from commit 31b61f0ef9)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The warning should be just a warning. Where it is currently is wrong
since we already registered the connector on drm, meaning it dies later
on a NULL pointer deref if the VBT-overriding we have is removed. Move
the warning up.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108214251.79305-1-lucas.demarchi@intel.com
live_blt is still failing on hsw, showing the hallmark of incoherency.
Since we are fairly certain that the interrupt is after the seqno is
visible, the other possibility is that the seqno is before the writes to
memory are flushed. Throw in an TLB invalidate before the breadcrumb as
we are reasonably confident that forces a CS stall.
References: f9228f7658 ("drm/i915/gt: Try an extra flush on the Haswell blitter")
References: https://bugs.freedesktop.org/show_bug.cgi?id=112147
Testcase: igt/i915_selftest/live_blt
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112160941.23969-1-chris@chris-wilson.co.uk
drivers/gpu/drm/i915/gem/selftests/i915_gem_object_blt.c:453 igt_threaded_blt() error: uninitialized symbol 'file'.
Fixes: 34485832cb ("drm/i915/selftests: Exercise parallel blit operations on a single ctx")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112163643.3527-1-chris@chris-wilson.co.uk
Using the array is getting clumsy. Make things a bit more dynamic.
Remove early returns on not having child devices when the end result
after "iterating" the empty list would be the same.
v3:
- use list_add_tail to not reverse the child device list (Ville)
v2:
- stick to previous naming of child devices (Ville)
- use kzalloc, handle failure
- initialize list head earlier to keep intel_bios_driver_remove() safe
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3e72da0b412354ed8be6719df55b0e0cc4caa61a.1573227240.git.jani.nikula@intel.com
On gen7, including Haswell, the MI_FLUSH_DW command is not synchronous
with the command streamer nor is there an option to make it so. To hide
this we add a large delay on the CS so that the breadcrumb should always
be visible before the interrupt. However, that does not seem to be
enough to ensure the memory is actually coherent with the read of the
breadcrumb. The breadcrumb update is a post-sync op... Throw in a
preliminary MI_FLUSH_DW before the breadcrumb update in the hope that
helps.
References: https://bugs.freedesktop.org/show_bug.cgi?id=112147
Testcase: igt/i915_selftest/live_blt
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111120957.17732-1-chris@chris-wilson.co.uk
Since we removed the pm hookup from the GT, the hook in
drm_i915_private.gem is unused. Remove it.
References: 18f3b2727f ("drm/i915: Remove pm park/unpark notifications")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112113434.31088-1-chris@chris-wilson.co.uk
set_page_dirty says:
For pages with a mapping this should be done under the page lock
for the benefit of asynchronous memory errors who prefer a
consistent dirty state. This rule can be broken in some special
cases, but should be better not to.
Under those rules, it is only safe for us to use the plain set_page_dirty
calls for shmemfs/anonymous memory. Userptr may be used with real
mappings and so needs to use the locked version (set_page_dirty_lock).
However, following a try_to_unmap() we may want to remove the userptr and
so call put_pages(). However, try_to_unmap() acquires the page lock and
so we must avoid recursively locking the pages ourselves -- which means
that we cannot safely acquire the lock around set_page_dirty(). Since we
can't be sure of the lock, we have to risk skip dirtying the page, or
else risk calling set_page_dirty() without a lock and so risk fs
corruption.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012
Fixes: 5cc9ed4b9a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
References: cb6d7c7dc7 ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
References: 505a8ec7e1 ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"")
References: 6dcc693bc5 ("ext4: warn when page is dirtied without buffers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk
(cherry picked from commit 0d4bbe3d40)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We report "frequencies" (actual-frequency, requested-frequency) as the
number of accumulated cycles so that the average frequency over that
period may be determined by the user. This means the units we report to
the user are Mcycles (or just M), not MHz.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191109105356.5273-1-chris@chris-wilson.co.uk
(cherry picked from commit e88866ef02)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Inside print_request(), we query the context/timeline name. Nothing
immediately protects the context from being freed if the request is
complete -- we rely on serialisation by the caller to keep the name
valid until they finish using it. Inside intel_engine_dump(), we
generally only print the requests in the execution queue protected by the
engine->active.lock, but we also show the pending execlists ports which
are not protected and so require a rcu_read_lock to keep the pointer
valid.
[ 1695.700883] BUG: KASAN: use-after-free in i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.700981] Read of size 8 at addr ffff8887344f4d50 by task gem_ctx_persist/2968
[ 1695.701068]
[ 1695.701156] CPU: 1 PID: 2968 Comm: gem_ctx_persist Tainted: G U 5.4.0-rc6+ #331
[ 1695.701246] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[ 1695.701334] Call Trace:
[ 1695.701424] dump_stack+0x5b/0x90
[ 1695.701870] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.701964] print_address_description.constprop.7+0x36/0x50
[ 1695.702408] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702856] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702947] __kasan_report.cold.10+0x1a/0x3a
[ 1695.703390] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.703836] i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.704241] print_request+0x82/0x2e0 [i915]
[ 1695.704638] ? fwtable_read32+0x133/0x360 [i915]
[ 1695.705042] ? write_timestamp+0x110/0x110 [i915]
[ 1695.705133] ? _raw_spin_lock_irqsave+0x79/0xc0
[ 1695.705221] ? refcount_inc_not_zero_checked+0x91/0x110
[ 1695.705306] ? refcount_dec_and_mutex_lock+0x50/0x50
[ 1695.705709] ? intel_engine_find_active_request+0x202/0x230 [i915]
[ 1695.706115] intel_engine_dump+0x2c9/0x900 [i915]
Fixes: c36eebd9ba ("drm/i915/gt: execlists->active is serialised by the tasklet")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-1-chris@chris-wilson.co.uk
(cherry picked from commit fecffa4668)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The ordering of the checks in the existing code can lead to holding
preemption not being considered as privileged op.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 9cd20ef780 ("drm/i915/perf: allow holding preemption on filtered ctx")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111095308.2550-1-lionel.g.landwerlin@intel.com
(cherry picked from commit 0b0120d4c7)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Pass around the intended intel_uncore for mmio access during stolen
setup, and avoid relying on the implicit magic I915_READ() macros.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111182143.23479-1-chris@chris-wilson.co.uk
Some basic information that is useful to know, such as how many cycles
is a MI_NOOP.
v2: Keep volatile pages pinned at all times! (Matthew)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Anna Karas <anna.karas@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111172716.23733-1-chris@chris-wilson.co.uk
The gem_ctx_persistence/smoketest was detecting an odd coherency issue
inside the LRC context image; that the address of the ring buffer did
not match our associated struct intel_ring. As we set the address into
the context image when we pin the ring buffer into place before the
context is active, that leaves the question of where did it get
overwritten. Either the HW context save occurred after our pin which
would imply that our idle barriers are broken, or we overwrote the
context image ourselves. It is only in reset_active() where we dabble
inside the context image outside of a serialised path from schedule-out;
but we could equally perform the operation inside schedule-in which is
then fully serialised with the context pin -- and remains serialised by
the engine pulse with kill_context(). (The only downside, aside from
doing more work inside the engine->active.lock, was the plan to merge
all the reset paths into doing their context scrubbing on schedule-out
needs more thought.)
Fixes: d12acee84f ("drm/i915/execlists: Cancel banned contexts on schedule-out")
Testcase: igt/gem_ctx_persistence/smoketest
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-3-chris@chris-wilson.co.uk
When a jump_whitelist bitmap is reused, it needs to be cleared.
Currently this is done with memset() and the size calculation assumes
bitmaps are made of 32-bit words, not longs. So on 64-bit
architectures, only the first half of the bitmap is cleared.
If some whitelist bits are carried over between successive batches
submitted on the same context, this will presumably allow embedding
the rogue instructions that we're trying to reject.
Use bitmap_zero() instead, which gets the calculation right.
Fixes: f8c08d8fae ("drm/i915/cmdparser: Add support for backward jumps")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Enable gup to retry and fault the pages outside of the mmap_sem lock in
our worker. As we are inside our worker, outside of any critical path,
we can allow the mmap_sem lock to be dropped in order to service a page
fault; this in turn allows the mm to populate the page using a slow
fault handler.
References: 5b56d49fc3 ("mm: add locked parameter to get_user_pages_remote()")
Testcase: igt/gem_userptr/userfault
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-2-chris@chris-wilson.co.uk
set_page_dirty says:
For pages with a mapping this should be done under the page lock
for the benefit of asynchronous memory errors who prefer a
consistent dirty state. This rule can be broken in some special
cases, but should be better not to.
Under those rules, it is only safe for us to use the plain set_page_dirty
calls for shmemfs/anonymous memory. Userptr may be used with real
mappings and so needs to use the locked version (set_page_dirty_lock).
However, following a try_to_unmap() we may want to remove the userptr and
so call put_pages(). However, try_to_unmap() acquires the page lock and
so we must avoid recursively locking the pages ourselves -- which means
that we cannot safely acquire the lock around set_page_dirty(). Since we
can't be sure of the lock, we have to risk skip dirtying the page, or
else risk calling set_page_dirty() without a lock and so risk fs
corruption.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012
Fixes: 5cc9ed4b9a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
References: cb6d7c7dc7 ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
References: 505a8ec7e1 ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"")
References: 6dcc693bc5 ("ext4: warn when page is dirtied without buffers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk
The setting of MSA is done by the DDI .pre_enable() hook. And when we are
using MST, the MSA is only set to first mst stream by calling of
DDI .pre_eanble() hook. It raies issues to non-first mst streams.
Wrong MSA or missed MSA packets might show scrambled screen or wrong
screen.
This splits a setting of MSA to MST and SST cases. And In the MST case it
will call a setting of MSA after an allocating of Virtual Channel from
MST encoder pre_enable callback.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112212
Fixes: 0c06fa1560 ("drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA")
Fixes: d4a415dcda ("drm/i915: Fix MST oops due to MSA changes")
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106212636.502471-1-gwan-gyeong.mun@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
[vsyrjala: nuke spurious newline]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Having been forced to reduce Braswell back to using the aliasing ppgtt,
the coherency issue we previously observed cannot impact us. Reduce the
performance penalty imposed on all platforms from using the mfence to a
mere sfence.
References: cf66b8a0ba ("drm/i915/execlists: Apply a full mb before execution for Braswell")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191110185806.17413-10-chris@chris-wilson.co.uk
As the ftrace buffer is single shot, once dumped it will not update. As
such, it only provides information for the first bug and all subsequent
bugs are noise. The goal of CI is to have zero bugs, so taint the kernel
causing CI to reboot the machine; fix the bug and move on.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191110185806.17413-13-chris@chris-wilson.co.uk
To test mmap_offset_exhaustion, we first have to fill the entire vma
manager leaving a single page. Don't assume that the vma manager is not
already fragment, and fill all the holes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111122706.28292-2-chris@chris-wilson.co.uk
We report "frequencies" (actual-frequency, requested-frequency) as the
number of accumulated cycles so that the average frequency over that
period may be determined by the user. This means the units we report to
the user are Mcycles (or just M), not MHz.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191109105356.5273-1-chris@chris-wilson.co.uk
If we detect a hang in a closed context, just flush all of its requests
and cancel any remaining execution along the context. Note that after
closing the context, the last reference to the context may be dropped,
leaving it only valid under RCU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-5-chris@chris-wilson.co.uk
We mention that we are resetting the GPU, and dump the device state for
post mortem debugging. However, while that dump contains the active
processes and the one flagged as causing the error, we do not always
include that information in dmesg. Include the name of the guilty
process in dmesg for reference.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-4-chris@chris-wilson.co.uk
Use a small char buffer inside the i915_gem_context to store the user
friendly name so that ctx->name has the same lifetime as the RCU
protected GEM context. That is, e.g. when using print_request() that
prints the timeline name (ctx->name), the name will not be prematurely
freed upon the context being closed and the last reference dropped.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-2-chris@chris-wilson.co.uk
Inside print_request(), we query the context/timeline name. Nothing
immediately protects the context from being freed if the request is
complete -- we rely on serialisation by the caller to keep the name
valid until they finish using it. Inside intel_engine_dump(), we
generally only print the requests in the execution queue protected by the
engine->active.lock, but we also show the pending execlists ports which
are not protected and so require a rcu_read_lock to keep the pointer
valid.
[ 1695.700883] BUG: KASAN: use-after-free in i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.700981] Read of size 8 at addr ffff8887344f4d50 by task gem_ctx_persist/2968
[ 1695.701068]
[ 1695.701156] CPU: 1 PID: 2968 Comm: gem_ctx_persist Tainted: G U 5.4.0-rc6+ #331
[ 1695.701246] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[ 1695.701334] Call Trace:
[ 1695.701424] dump_stack+0x5b/0x90
[ 1695.701870] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.701964] print_address_description.constprop.7+0x36/0x50
[ 1695.702408] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702856] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702947] __kasan_report.cold.10+0x1a/0x3a
[ 1695.703390] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.703836] i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.704241] print_request+0x82/0x2e0 [i915]
[ 1695.704638] ? fwtable_read32+0x133/0x360 [i915]
[ 1695.705042] ? write_timestamp+0x110/0x110 [i915]
[ 1695.705133] ? _raw_spin_lock_irqsave+0x79/0xc0
[ 1695.705221] ? refcount_inc_not_zero_checked+0x91/0x110
[ 1695.705306] ? refcount_dec_and_mutex_lock+0x50/0x50
[ 1695.705709] ? intel_engine_find_active_request+0x202/0x230 [i915]
[ 1695.706115] intel_engine_dump+0x2c9/0x900 [i915]
Fixes: c36eebd9ba ("drm/i915/gt: execlists->active is serialised by the tasklet")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-1-chris@chris-wilson.co.uk
After doing some measuring, Icelake behaves on a par with Broadwell, and
without having to compromise for low power cores with long latencies, we
can reduce the powergating hysteresis so that the powersaving is enabled
faster. No impact observed on client side throughput measures (so
negligible increase in extra switching), and inspection from high
frequency polling using igt/gem_exec_nop/sequential, provided an estimate
for the upper bound before we can measure a substantial impact on
latency.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191110185806.17413-9-chris@chris-wilson.co.uk
The LUTs are single buffered so in order to program them without
tearing we'd have to do it during vblank (actually to be 100%
effective it has to happen between start of vblank and frame start).
We have no proper mechanism for that at the moment so we just
defer loading them after the vblank waits have happened. That
is not quite sufficient (especially when committing multiple pipes
whose vblanks don't line up) so the LUT load will often leak into
the following frame causing tearing.
However in case the hardware wasn't previously using the LUT we
can preload it before setting the enable bit (which is double
buffered so won't tear). Let's determine if we can do such
preloading and make it happen. Slight variation between the
hardware requires some platforms specifics in the checks.
Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win
and Asus T100HA) when the gamma LUT gets loaded for the first
time as the BIOS has left some junk in the LUT memory.
v2: Deal with uapi vs. hw crtc state split
s/GCM/CGM/ typo fix
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 051a6d8d3c ("drm/i915: Move LUT programming to happen after vblank waits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 0ccc42a2fd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Make sure we have a crtc before probing its primary plane's
max stride. Initially I thought we can't get this far without
crtcs, but looks like we can via the dumb_create ioctl.
Not sure if we shouldn't disable dumb buffer support entirely
when we have no crtcs, but that would require some amount of work
as the only thing currently being checked is dev->driver->dumb_create
which we'd have to convert to some device specific dynamic thing.
Cc: stable@vger.kernel.org
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: aa5ca8b742 ("drm/i915: Align dumb buffer stride to 4k to allow for gtt remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106172349.11987-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit baea9ffe64)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The intel_dp_link_training.h include has no need or place in
intel_display.h. Include it in intel_display.c instead.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: eadf6f9170 ("drm/i915/display/icl: Enable master-slaves in trans port sync")
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029103947.7535-1-jani.nikula@intel.com
(cherry picked from commit 3c954c418e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When inside the lock, remember to unlock even if you want to leave
early.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: a4e7ccdac3 ("drm/i915: Move context management under GEM")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106144155.25727-1-chris@chris-wilson.co.uk
(cherry picked from commit feba2b8146)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Mika spotted that only using cancel_delayed_work() could mean that we
attempted to clear the heartbeat.systole while the worker was still
running. Rectify the situation by only touching the systole from outside
the worker if we suceeded in cancelling the worker before it could run.
The worker is expected to clean up by itself upon idling.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: 058179e72e ("drm/i915/gt: Replace hangcheck by heartbeats")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106133129.17732-1-chris@chris-wilson.co.uk
(cherry picked from commit 841e867286)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When a custom powerplay table is provided, we need to update
the OD VDDC flag to avoid AVFS being enabled when it shouldn't be.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205393
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is to improve the performance in the compute mode
for vega10. For example, the original performance for a rocm
bandwidth test: 2G internal GPU copy, is about 99GB/s.
With the idle power features disabled dynamically, the porformance
is promoted to about 215GB/s.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
OD is not supported on Arcturus. Thus the
pp_od_clk_voltage sysfs interface is also not supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will cause modprobe atombios stuck problem in raven2 if it doesn't
allow direct upload save restore list from gfx driver.
So it needs to allow direct upload save restore list for raven2
temporarily.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure we have a crtc before probing its primary plane's
max stride. Initially I thought we can't get this far without
crtcs, but looks like we can via the dumb_create ioctl.
Not sure if we shouldn't disable dumb buffer support entirely
when we have no crtcs, but that would require some amount of work
as the only thing currently being checked is dev->driver->dumb_create
which we'd have to convert to some device specific dynamic thing.
Cc: stable@vger.kernel.org
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: aa5ca8b742 ("drm/i915: Align dumb buffer stride to 4k to allow for gtt remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106172349.11987-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
On gen7, we have to avoid concurrent access to the same mmio cacheline,
and so coordinate all mmio access with the uncore->lock. However, for
pmu, we want to avoid perturbing the system and disabling interrupts
unnecessarily, so restrict the w/a to gen7 where it is requied to
prevent machine hangs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108103511.20951-2-chris@chris-wilson.co.uk
We want to avoid taking forcewake when querying the performance stats,
as we wish to avoid perturbing the system under observation. (And with
the forcewake being kept alive for 1ms after use, sampling the frequency
from a 200Hz timer keeps forcewake 40% active.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108103511.20951-1-chris@chris-wilson.co.uk
In the selftests, where we are accessing a private ctx from within the
confines of a single test, we know that the ctx->vm pointer is static
and bounded by the lifetime of the test. We can use a simple helper to
provide the RCU annotations to keep sparse happy.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107221201.30497-1-chris@chris-wilson.co.uk
Since drm provided us with a real struct file we can use for our
anonymous internal clients (mock_file), complete our transition to using
that as the primary interface (and not the mocked up struct drm_file we
previous were using).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107213929.23286-1-chris@chris-wilson.co.uk
The headers in the gem/selftests/, gt/selftests, gvt/, selftests/
directories have never been compile-tested, but it would be possible
to make them self-contained.
This commit only addresses missing <linux/types.h> and forward
struct declarations.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108094142.25942-1-yamada.masahiro@socionext.com
drm-fixes-5.4-2019-11-06:
amdgpu:
- Fix navi14 display issue root cause and revert workaround
- GPU reset scheduler interaction fix
- Fix fan boost on multi-GPU
- Gfx10 and sdma5 fixes for navi
- GFXOFF fix for renoir
- Add navi14 PCI ID
- GPUVM fix for arcturus
radeon:
- Port an SI power fix from amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107032241.1021217-1-alexander.deucher@amd.com
- Do not use TBT type for non Type-C ports.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdwz2eAAoJEPpiX2QO6xPK2BgH/14HVq7euW204goERrqwRjWF
11HaSYbT2yG12vbwrahNJjSejj7VQbhN+TF9Fe221WG1R3XYig1SF72tpmfanKNG
u10BEXHxxuTVSPos8TCQmrspUHUDCYRyfzbByrL/g7i2oMuO1pIaFsKkFN8weu9h
EzEAc+h5k/PGrB0pN2Ez0mVKYnKB1WYkgUvQaziHKUUHh1okyQgpJkKzPfoiGQRq
CWNsfsy+YZ8XJJp12HucE1S8faphgusX82e9DuhWLizb0WMIJElq8wx/iIaeCNsr
IFFl1sePZMshq4LXmhz15NS6cqiOXt50BRjCCgJD1b4mFsPytbbMedekDhBlPSc=
=csHm
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2019-11-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix HPD poll to avoid kworker consuming a lot of cpu cycles.
- Do not use TBT type for non Type-C ports.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106213958.GA16525@intel.com
- Fix for a state dereference in atomic self-refresh helpers
- One compilation fix for c2p fbdev helpers
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXcPUHwAKCRDj7w1vZxhR
xfQ+AQDqa+ddvrlr9S0lAwv3R6iH8E9/uk1/PaKJEEyPFL6lQgEA7lNWpgWKuSDx
fpY3uqEhV1sNcCmBan968wjySi6BpwY=
=b9Yc
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-11-07-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- Some new documentation for GEM shmem madvise helpers
- Fix for a state dereference in atomic self-refresh helpers
- One compilation fix for c2p fbdev helpers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107082215.GA34850@gilmour.lan
Problem:
During GPU reset we call the GPU scheduler to suspend it's
thread, those two functions in amdgpu also suspend and resume
the sceduler for their needs but this can collide with GPU
reset in progress and accidently restart a suspended thread
before time.
Fix:
Serialize with GPU reset.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the sched thread is parked we assume ring_mirror_list is
not accessed from here.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 89b3d86403.
We will do a proper fix in next patch.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removes thread park/unpark hack from drm_sched_entity_fini and
by this fixes reactivation of scheduler thread while the thread
is supposed to be stopped.
v2: Per sched entity completion.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vega20 only requires all devices be set to same pstate level for low
pstate and not high.
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Evan Quan <Evan.Quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the asic callback function of get_pcie_replay_count is not implement on navi asic,
it will cause null pinter error when read this interface.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For driver reload test, it will report "can't enable
MSI (MSI-X already enabled)".
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Explain fields like aper_base, agp_start etc. The definition
of those fields are confusing as they are from different view
(CPU or GPU). Add comments for easier understand.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <Alex.Deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than just specifying the bullet numbers from the bspec (e.g.,
"4.b") actually include the description of what the bspec wants us to
do. Steps can be renumbered or moved so including the description will
help us match the code up to the spec. Plus if we add support for new
platforms, some of the steps may be added/removed so more descriptive
comments will be useful for ensuring all of the bspec requirements are
met.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107174527.11165-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Whenever, we unbind (or change fence registers) on an object, we must
revoke any and all mmap_gtt using the previous bindings. Those user PTEs
point at the GGTT which know points into a new object, the wrong object.
Ergo, those PTEs must be cleared so that any user access provokes a new
page fault.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-5-chris@chris-wilson.co.uk
Provide a utility function to create a vma corresponding to an mmap() of
our device. And use it to exercise the equivalent of userspace
performing a GTT mmap of our objects.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-4-chris@chris-wilson.co.uk
As drm now exports a method to create an anonymous struct file around a
drm_device for internal use, make use of it to avoid our horrible hacks.
Danial suggested that the mock_file_put() wrapper was suitable for
drm-core, along with the mock_drm_getfile() [and that the vestigal
mock_drm_file() in this patch should perhaps be the drm interface
itself]. However, the eventual goal is to remove the mock_drm_file() and
use the struct file and fput() directly, in this patch we take a simple
transition in that direction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-3-chris@chris-wilson.co.uk
Sometimes we need to create a struct file to wrap a drm_device, as it
the user were to have opened /dev/dri/card0 but to do so anonymously
(i.e. for internal use). Provide a utility method to create a struct
file with the drm_device->driver.fops, that wrap the drm_device.
v2: Restrict usage to selftests
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-2-chris@chris-wilson.co.uk
Currently, we only export symbols for drm-selftests which are either
compiled as modules or into the main drm builtin. However, if we want to
export symbols from drm.ko for the drivers' selftests, we require a
means of controlling that export separately. So we add a new Kconfig to
determine whether or not the EXPORT_SYMBOL_FOR_TESTS_ONLY() takes
effect.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-1-chris@chris-wilson.co.uk
As we read the ctx->vm unlocked before cloning/exporting, we should
validate our reference is correct before returning it. We already do for
clone_vm() but were not so strict around get_ppgtt().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106091312.12921-1-chris@chris-wilson.co.uk
Only add the engine to the available set of uabi engines once it has
been fully initialised and we know we want it in the public set.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107081252.10542-17-chris@chris-wilson.co.uk
The LUTs are single buffered so in order to program them without
tearing we'd have to do it during vblank (actually to be 100%
effective it has to happen between start of vblank and frame start).
We have no proper mechanism for that at the moment so we just
defer loading them after the vblank waits have happened. That
is not quite sufficient (especially when committing multiple pipes
whose vblanks don't line up) so the LUT load will often leak into
the following frame causing tearing.
However in case the hardware wasn't previously using the LUT we
can preload it before setting the enable bit (which is double
buffered so won't tear). Let's determine if we can do such
preloading and make it happen. Slight variation between the
hardware requires some platforms specifics in the checks.
Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win
and Asus T100HA) when the gamma LUT gets loaded for the first
time as the BIOS has left some junk in the LUT memory.
v2: Deal with uapi vs. hw crtc state split
s/GCM/CGM/ typo fix
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 051a6d8d3c ("drm/i915: Move LUT programming to happen after vblank waits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Add helper functions for sending the DSI compression mode and picture
parameter set data type packets. For the time being, limit the support
to using VESA DSC 1.1 and the default PPS. This may need updating if the
need arises for proprietary compression or non-default PPS, however keep
it simple for starters.
v2: Add missing EXPORT_SYMBOL
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-5-jani.nikula@intel.com
The DCS command has been named SET_PARTIAL_ROWS in the DCS spec since
v1.02, for more than a decade. Rename the enumeration to match the spec.
v2: add comment about the rename (David Lechner)
Cc: David Lechner <david@lechnology.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-4-jani.nikula@intel.com
Rename picture parameter set (it's a long packet, not a long write) and
compression mode (it's not a DCS command) enumerations according to the
DSI specification. Order the types according to the spec. Use tabs
instead of spaces for indentation. Use all lower case for hex.
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-1-jani.nikula@intel.com
If Local memory is supported by hardware, we want framebuffer backing
gem objects from local memory.
if the backing obj is not from LMEM, pin_to_display is failed.
v2:
memory regions are correctly assigned to obj->memory_regions [tvrtko]
migration failure is reported as debug log [Tvrtko]
v3:
Migration is dropped. only error is reported [Daniel]
mem region check is move to pin_to_display [Chris]
v4:
s/dev_priv/i915 [chris]
v5:
i915_gem_object_is_lmem is used for detecting the obj mem type. [Matt]
cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191105144414.30470-1-ramalingam.c@intel.com
The intel_dp_link_training.h include has no need or place in
intel_display.h. Include it in intel_display.c instead.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: eadf6f9170 ("drm/i915/display/icl: Enable master-slaves in trans port sync")
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029103947.7535-1-jani.nikula@intel.com
So strictly speaking the existing annotation is also ok, because we
have a chain of
obj->mm.lock#I915_MM_GET_PAGES -> fs_reclaim -> obj->mm.lock
(the shrinker cannot get at an object while we're in get_pages, hence
this is safe). But it's confusing, so try to take the right subclass
of the lock.
This does a bit reduce our lockdep based checking, but then it's also
less fragile, in case we ever change the nesting around.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173720.2696-3-daniel.vetter@ffwll.ch
The trouble with having a plain nesting flag for locks which do not
naturally nest (unlike block devices and their partitions, which is
the original motivation for nesting levels) is that lockdep will
never spot a true deadlock if you screw up.
This patch is an attempt at trying better, by highlighting a bit more
of the actual nature of the nesting that's going on. Essentially we
have two kinds of objects:
- objects without pages allocated, which cannot be on any lru and are
hence inaccessible to the shrinker.
- objects which have pages allocated, which are on an lru, and which
the shrinker can decide to throw out.
For the former type of object, memory allocations while holding
obj->mm.lock are permissible. For the latter they are not. And
get/put_pages transitions between the two types of objects.
This is still not entirely fool-proof since the rules might change.
But as long as we run such a code ever at runtime lockdep should be
able to observe the inconsistency and complain (like with any other
lockdep class that we've split up in multiple classes). But there are
a few clear benefits:
- We can drop the nesting flag parameter from
__i915_gem_object_put_pages, because that function by definition is
never going allocate memory, and calling it on an object which
doesn't have its pages allocated would be a bug.
- We strictly catch more bugs, since there's not only one place in the
entire tree which is annotated with the special class. All the
other places that had explicit lockdep nesting annotations we're now
going to leave up to lockdep again.
- Specifically this catches stuff like calling get_pages from
put_pages (which isn't really a good idea, if we can call get_pages
so could the shrinker). I've seen patches do exactly that.
Of course I fully expect CI will show me for the fool I am with this
one here :-)
v2: There can only be one (lockdep only has a cache for the first
subclass, not for deeper ones, and we don't want to make these locks
even slower). Still separate enums for better documentation.
Real fix: don't forget about phys objs and pin_map(), and fix the
shrinker to have the right annotations ... silly me.
v3: Forgot usertptr too ...
v4: Improve comment for pages_pin_count, drop the IMPORTANT comment
and instead prime lockdep (Chris).
v5: Appease checkpatch, no double empty lines (Chris)
v6: More rebasing over selftest changes. Also somehow I forgot to
push this patch :-/
Also format comments consistently while at it.
v7: Fix typo in commit message (Joonas)
Also drop the priming, with the lmem merge we now have allocations
while holding the lmem lock, which wreaks the generic priming I've
done in earlier patches. Should probably be resurrected when lmem is
fixed. See
commit 232a6ebae4
Author: Matthew Auld <matthew.auld@intel.com>
Date: Tue Oct 8 17:01:14 2019 +0100
drm/i915: introduce intel_memory_region
I'm keeping the priming patch locally so it wont get lost.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Tang, CQ" <cq.tang@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v5)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v6)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191105090148.30269-1-daniel.vetter@ffwll.ch
[mlankhorst: Fix commit typos pointed out by Michael Ruhl]
Before we grab the engine wakeref, tidy up the previous heartbeat
request. If we then abort because the engine powerwell is off, we ensure
the request is freed as we know we will not have freed it when
cancelling the work (as the work is running!).
Fixes: 841e867286 ("drm/i915/gt: Only drop heartbeat.systole if the sole owner")
References: 058179e72e ("drm/i915/gt: Replace hangcheck by heartbeats")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106223410.30334-1-chris@chris-wilson.co.uk
Need to set the dte flag on this asic.
Port the fix from amdgpu:
5cb818b861 ("drm/amd/amdgpu: fix si_enable_smc_cac() failed issue")
Reviewed-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
It needs to add warning to update firmware in gfx9
in case that firmware is too old to have function to
realize dummy read in cp firmware.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GRBM register interface is now capable of bursting 1 cycle per
register wr->wr, wr->rd much faster than previous muticycle per
transaction done interface. This has caused a problem where
status registers requiring HW to update have a 1 cycle delay, due
to the register update having to go through GRBM.
For cp ucode, it has realized dummy read in cp firmware.It covers
the use of WAIT_REG_MEM operation 1 case only.So it needs to call
gfx_v10_0_wait_reg_mem in gfx10. Besides it also needs to add warning to
update firmware in case firmware is too old to have function to realize
dummy read in cp firmware.
For sdma ucode, it hasn't realized dummy read in sdma firmware. sdma is
moved to gfxhub in gfx10. So it needs to add dummy read in driver
between amdgpu_ring_emit_wreg and amdgpu_ring_emit_reg_wait for sdma_v5_0.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, the feature enablement will be skipped due to wrong count.
Fixes: beff74bc6e ("drm/amdgpu: fix a race in GPU reset with IB test (v2)")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix workload bit (WORKLOAD_PPLIB_COMPUTE_BIT) map error
on vega20 and navi asic.
fix commit:
drm/amd/powerplay: add function get_workload_type_map for swsmu
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prefer using intel_encoder and pass the base where needed rather than
keeping both encoder and intel_encoder variables around.
v2: actually add all changes to the patch
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106071715.10613-1-lucas.demarchi@intel.com
Another TGP ID has shown up, so let's add it to avoid South Display
breakage on systems that have this ID.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106005526.1500-1-james.ausmus@intel.com
Clarify some areas, clean up formatting, add section for
unrecoverable error handling.
v2: fix grammatical errors
Reviewed-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to set the dte flag on this asic.
Port the fix from amdgpu:
5cb818b861 ("drm/amd/amdgpu: fix si_enable_smc_cac() failed issue")
Reviewed-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The reference to object fence is dropped at the end of the loop.
However, it is dropped again outside the loop. The reference can be
dropped immediately after calling dma_fence_wait() in the loop and
thus the dropping operation outside the loop can be removed.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The object fence is not set to NULL after its reference is dropped. As a
result, its reference may be dropped again if error occurs after that,
which may lead to a use after free bug. To avoid the issue, fence is
explicitly set to NULL after dropping its reference.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using unified VBIOS has performance drop in sriov environment.
The fix is switching to another register instead.
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It needs to add warning to update firmware in gfx9
in case that firmware is too old to have function to
realize dummy read in cp firmware.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GRBM register interface is now capable of bursting 1 cycle per
register wr->wr, wr->rd much faster than previous muticycle per
transaction done interface. This has caused a problem where
status registers requiring HW to update have a 1 cycle delay, due
to the register update having to go through GRBM.
For cp ucode, it has realized dummy read in cp firmware.It covers
the use of WAIT_REG_MEM operation 1 case only.So it needs to call
gfx_v10_0_wait_reg_mem in gfx10. Besides it also needs to add warning to
update firmware in case firmware is too old to have function to realize
dummy read in cp firmware.
For sdma ucode, it hasn't realized dummy read in sdma firmware. sdma is
moved to gfxhub in gfx10. So it needs to add dummy read in driver
between amdgpu_ring_emit_wreg and amdgpu_ring_emit_reg_wait for sdma_v5_0.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_enable_umd_pstate() will try to get the smu->mutex which was already
hold by its parent API smu_force_performance_level() on the call path.
Thus deadlock happens.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
P-state switch should be performed after all devices from the hive
get initialized.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added lock protection so that the p-state switch will
be guarded to be sequential. Also update the hive
pstate only all device from the hive are in the same
state.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, the feature enablement will be skipped due to wrong count.
Fixes: beff74bc6e ("drm/amdgpu: fix a race in GPU reset with IB test (v2)")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix workload bit (WORKLOAD_PPLIB_COMPUTE_BIT) map error
on vega20 and navi asic.
fix commit:
drm/amd/powerplay: add function get_workload_type_map for swsmu
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fit the latest SMU firmware.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Direct uploading save/restore list via mmio register writes breaks the security
policy. Instead, the driver should pass s&r list to psp.
For all the ASICs that use rlc v2_1 headers, the driver actually upload s&r list
twice, in non-psp ucode front door loading phase and gfx pg initialization phase.
The latter is not allowed.
VG12 is the only exception where the driver still keeps legacy approach for S&R
list uploading. In theory, this can be elimnated if we have valid srcntl ucode
for VG12.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Candice Li <Candice.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a static code checker warning.
v2: Drop PTR_ERR_OR_ZERO.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When unloading driver, need to free discovery memory.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we know where the tables came from.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 967a3b85ba.
Reason for revert: Root cause of this issue is found. The workaround is not needed anymore.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Navi10 has 6 PHY, but Navi14 only has 5 PHY, that is
because there is no ENGINE_ID_DIGD in Navi14. Without
this patch, many HDMI related issues (e.g. HDMI S3
resume failure, HDMI pink screen on boot) will be
observed.
[How]
If "eng_id" is larger than ENGINE_ID_DIGD, then
add "eng_id" by 1.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Neil Mayhew <neil@neil.mayhew.name>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To better clarify what is happening in this function.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's safe to enable dynamic VCN powergating on raven and
raven2 for increased power savings.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add xgmi pstate setting on powerplay routine.
V2: split the change of is_support_sw_smu_xgmi into a separate patch
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add check for is_sw_smu routine and drop check
for amdgpu_dpm which seems non-sense.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pstate settings should be performed after all device of the
XGMI setup get initialized.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 385857adb8.
Reason for revert: Root cause of this issue is found. The workaround is not needed anymore.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
