Pull networking fixes from David Miller:
"A decent batch of fixes here. I'd say about half are for problems that
have existed for a while, and half are for new regressions added in
the 4.20 merge window.
1) Fix 10G SFP phy module detection in mvpp2, from Baruch Siach.
2) Revert bogus emac driver change, from Benjamin Herrenschmidt.
3) Handle BPF exported data structure with pointers when building
32-bit userland, from Daniel Borkmann.
4) Memory leak fix in act_police, from Davide Caratti.
5) Check RX checksum offload in RX descriptors properly in aquantia
driver, from Dmitry Bogdanov.
6) SKB unlink fix in various spots, from Edward Cree.
7) ndo_dflt_fdb_dump() only works with ethernet, enforce this, from
Eric Dumazet.
8) Fix FID leak in mlxsw driver, from Ido Schimmel.
9) IOTLB locking fix in vhost, from Jean-Philippe Brucker.
10) Fix SKB truesize accounting in ipv4/ipv6/netfilter frag memory
limits otherwise namespace exit can hang. From Jiri Wiesner.
11) Address block parsing length fixes in x25 from Martin Schiller.
12) IRQ and ring accounting fixes in bnxt_en, from Michael Chan.
13) For tun interfaces, only iface delete works with rtnl ops, enforce
this by disallowing add. From Nicolas Dichtel.
14) Use after free in liquidio, from Pan Bian.
15) Fix SKB use after passing to netif_receive_skb(), from Prashant
Bhole.
16) Static key accounting and other fixes in XPS from Sabrina Dubroca.
17) Partially initialized flow key passed to ip6_route_output(), from
Shmulik Ladkani.
18) Fix RTNL deadlock during reset in ibmvnic driver, from Thomas
Falcon.
19) Several small TCP fixes (off-by-one on window probe abort, NULL
deref in tail loss probe, SNMP mis-estimations) from Yuchung
Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits)
net/sched: cls_flower: Reject duplicated rules also under skip_sw
bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips.
bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips.
bnxt_en: Keep track of reserved IRQs.
bnxt_en: Fix CNP CoS queue regression.
net/mlx4_core: Correctly set PFC param if global pause is turned off.
Revert "net/ibm/emac: wrong bit is used for STA control"
neighbour: Avoid writing before skb->head in neigh_hh_output()
ipv6: Check available headroom in ip6_xmit() even without options
tcp: lack of available data can also cause TSO defer
ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output
mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl
mlxsw: spectrum_router: Relax GRE decap matching check
mlxsw: spectrum_switchdev: Avoid leaking FID's reference count
mlxsw: spectrum_nve: Remove easily triggerable warnings
ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes
sctp: frag_point sanity check
tcp: fix NULL ref in tail loss probe
tcp: Do not underestimate rwnd_limited
net: use skb_list_del_init() to remove from RX sublists
...
due to a missing mutex protection.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXAlffRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qq0KAP0eIy6/kwoBocygRLgB6N4naX/zFcw4
m2NiSlYe3NpC6AD/Z1g3wg8bKlm7ar2OzaqE4wQdeKjrvPlUtymUKiwFxA8=
=8Huu
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This is a single commit that fixes a bug in uprobes SDT code due to a
missing mutex protection"
* tag 'trace-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
Uprobes: Fix kernel oops with delayed_uprobe_remove()
There could be a race between task exit and probe unregister:
exit_mm()
mmput()
__mmput() uprobe_unregister()
uprobe_clear_state() put_uprobe()
delayed_uprobe_remove() delayed_uprobe_remove()
put_uprobe() is calling delayed_uprobe_remove() without taking
delayed_uprobe_lock and thus the race sometimes results in a
kernel crash. Fix this by taking delayed_uprobe_lock before
calling delayed_uprobe_remove() from put_uprobe().
Detailed crash log can be found at:
Link: http://lkml.kernel.org/r/000000000000140c370577db5ece@google.com
Link: http://lkml.kernel.org/r/20181205033423.26242-1-ravi.bangoria@linux.ibm.com
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: syzbot+cb1fb754b771caca0a88@syzkaller.appspotmail.com
Fixes: 1cc33161a8 ("uprobes: Support SDT markers having reference count (semaphore)")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Function graph tracing recurses into itself when stackleak is enabled,
causing the ftrace graph selftest to run for up to 90 seconds and
trigger the softlockup watchdog.
Breakpoint 2, ftrace_graph_caller () at ../arch/arm64/kernel/entry-ftrace.S:200
200 mcount_get_lr_addr x0 // pointer to function's saved lr
(gdb) bt
\#0 ftrace_graph_caller () at ../arch/arm64/kernel/entry-ftrace.S:200
\#1 0xffffff80081d5280 in ftrace_caller () at ../arch/arm64/kernel/entry-ftrace.S:153
\#2 0xffffff8008555484 in stackleak_track_stack () at ../kernel/stackleak.c:106
\#3 0xffffff8008421ff8 in ftrace_ops_test (ops=0xffffff8009eaa840 <graph_ops>, ip=18446743524091297036, regs=<optimized out>) at ../kernel/trace/ftrace.c:1507
\#4 0xffffff8008428770 in __ftrace_ops_list_func (regs=<optimized out>, ignored=<optimized out>, parent_ip=<optimized out>, ip=<optimized out>) at ../kernel/trace/ftrace.c:6286
\#5 ftrace_ops_no_ops (ip=18446743524091297036, parent_ip=18446743524091242824) at ../kernel/trace/ftrace.c:6321
\#6 0xffffff80081d5280 in ftrace_caller () at ../arch/arm64/kernel/entry-ftrace.S:153
\#7 0xffffff800832fd10 in irq_find_mapping (domain=0xffffffc03fc4bc80, hwirq=27) at ../kernel/irq/irqdomain.c:876
\#8 0xffffff800832294c in __handle_domain_irq (domain=0xffffffc03fc4bc80, hwirq=27, lookup=true, regs=0xffffff800814b840) at ../kernel/irq/irqdesc.c:650
\#9 0xffffff80081d52b4 in ftrace_graph_caller () at ../arch/arm64/kernel/entry-ftrace.S:205
Rework so we mark stackleak_track_stack as notrace
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2018-12-05
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) fix bpf uapi pointers for 32-bit architectures, from Daniel.
2) improve verifer ability to handle progs with a lot of branches, from Alexei.
3) strict btf checks, from Yonghong.
4) bpf_sk_lookup api cleanup, from Joe.
5) other misc fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
malicious bpf program may try to force the verifier to remember
a lot of distinct verifier states.
Put a limit to number of per-insn 'struct bpf_verifier_state'.
Note that hitting the limit doesn't reject the program.
It potentially makes the verifier do more steps to analyze the program.
It means that malicious programs will hit BPF_COMPLEXITY_LIMIT_INSNS sooner
instead of spending cpu time walking long link list.
The limit of BPF_COMPLEXITY_LIMIT_STATES==64 affects cilium progs
with slight increase in number of "steps" it takes to successfully verify
the programs:
before after
bpf_lb-DLB_L3.o 1940 1940
bpf_lb-DLB_L4.o 3089 3089
bpf_lb-DUNKNOWN.o 1065 1065
bpf_lxc-DDROP_ALL.o 28052 | 28162
bpf_lxc-DUNKNOWN.o 35487 | 35541
bpf_netdev.o 10864 10864
bpf_overlay.o 6643 6643
bpf_lcx_jit.o 38437 38437
But it also makes malicious program to be rejected in 0.4 seconds vs 6.5
Hence apply this limit to unprivileged programs only.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
pathological bpf programs may try to force verifier to explode in
the number of branch states:
20: (d5) if r1 s<= 0x24000028 goto pc+0
21: (b5) if r0 <= 0xe1fa20 goto pc+2
22: (d5) if r1 s<= 0x7e goto pc+0
23: (b5) if r0 <= 0xe880e000 goto pc+0
24: (c5) if r0 s< 0x2100ecf4 goto pc+0
25: (d5) if r1 s<= 0xe880e000 goto pc+1
26: (c5) if r0 s< 0xf4041810 goto pc+0
27: (d5) if r1 s<= 0x1e007e goto pc+0
28: (b5) if r0 <= 0xe86be000 goto pc+0
29: (07) r0 += 16614
30: (c5) if r0 s< 0x6d0020da goto pc+0
31: (35) if r0 >= 0x2100ecf4 goto pc+0
Teach verifier to recognize always taken and always not taken branches.
This analysis is already done for == and != comparison.
Expand it to all other branches.
It also helps real bpf programs to be verified faster:
before after
bpf_lb-DLB_L3.o 2003 1940
bpf_lb-DLB_L4.o 3173 3089
bpf_lb-DUNKNOWN.o 1080 1065
bpf_lxc-DDROP_ALL.o 29584 28052
bpf_lxc-DUNKNOWN.o 36916 35487
bpf_netdev.o 11188 10864
bpf_overlay.o 6679 6643
bpf_lcx_jit.o 39555 38437
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Malicious user space may try to force the verifier to use as much cpu
time and memory as possible. Hence check for pending signals
while verifying the program.
Note that suspend of sys_bpf(PROG_LOAD) syscall will lead to EAGAIN,
since the kernel has to release the resources used for program verification.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull STIBP fallout fixes from Thomas Gleixner:
"The performance destruction department finally got it's act together
and came up with a cure for the STIPB regression:
- Provide a command line option to control the spectre v2 user space
mitigations. Default is either seccomp or prctl (if seccomp is
disabled in Kconfig). prctl allows mitigation opt-in, seccomp
enables the migitation for sandboxed processes.
- Rework the code to handle the conditional STIBP/IBPB control and
remove the now unused ptrace_may_access_sched() optimization
attempt
- Disable STIBP automatically when SMT is disabled
- Optimize the switch_to() logic to avoid MSR writes and invocations
of __switch_to_xtra().
- Make the asynchronous speculation TIF updates synchronous to
prevent stale mitigation state.
As a general cleanup this also makes retpoline directly depend on
compiler support and removes the 'minimal retpoline' option which just
pretended to provide some form of security while providing none"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
x86/speculation: Provide IBPB always command line options
x86/speculation: Add seccomp Spectre v2 user space protection mode
x86/speculation: Enable prctl mode for spectre_v2_user
x86/speculation: Add prctl() control for indirect branch speculation
x86/speculation: Prepare arch_smt_update() for PRCTL mode
x86/speculation: Prevent stale SPEC_CTRL msr content
x86/speculation: Split out TIF update
ptrace: Remove unused ptrace_may_access_sched() and MODE_IBRS
x86/speculation: Prepare for conditional IBPB in switch_mm()
x86/speculation: Avoid __switch_to_xtra() calls
x86/process: Consolidate and simplify switch_to_xtra() code
x86/speculation: Prepare for per task indirect branch speculation control
x86/speculation: Add command line control for indirect branch speculation
x86/speculation: Unify conditional spectre v2 print functions
x86/speculataion: Mark command line parser data __initdata
x86/speculation: Mark string arrays const correctly
x86/speculation: Reorder the spec_v2 code
x86/l1tf: Show actual SMT state
x86/speculation: Rework SMT state change
sched/smt: Expose sched_smt_present static key
...
Merge misc fixes from Andrew Morton:
"31 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (31 commits)
ocfs2: fix potential use after free
mm/khugepaged: fix the xas_create_range() error path
mm/khugepaged: collapse_shmem() do not crash on Compound
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: rename freeze_page() to unmap_page()
initramfs: clean old path before creating a hardlink
kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace
psi: make disabling/enabling easier for vendor kernels
proc: fixup map_files test on arm
debugobjects: avoid recursive calls with kmemleak
userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
userfaultfd: shmem: add i_size checks
userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas
userfaultfd: shmem: allocate anonymous memory for MAP_PRIVATE shmem
...
- Fix crash by not allowing kprobing of stackleak_erase() (Alexander Popov)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=OU+C
-----END PGP SIGNATURE-----
Merge tag 'gcc-plugins-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull stackleak plugin fix from Kees Cook:
"Fix crash by not allowing kprobing of stackleak_erase() (Alexander
Popov)"
* tag 'gcc-plugins-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
stackleak: Disable function tracing and kprobes for stackleak_erase()
Since __sanitizer_cov_trace_pc() is marked as notrace, function calls in
__sanitizer_cov_trace_pc() shouldn't be traced either.
ftrace_graph_caller() gets called for each function that isn't marked
'notrace', like canonicalize_ip(). This is the call trace from a run:
[ 139.644550] ftrace_graph_caller+0x1c/0x24
[ 139.648352] canonicalize_ip+0x18/0x28
[ 139.652313] __sanitizer_cov_trace_pc+0x14/0x58
[ 139.656184] sched_clock+0x34/0x1e8
[ 139.659759] trace_clock_local+0x40/0x88
[ 139.663722] ftrace_push_return_trace+0x8c/0x1f0
[ 139.667767] prepare_ftrace_return+0xa8/0x100
[ 139.671709] ftrace_graph_caller+0x1c/0x24
Rework so that check_kcov_mode() and canonicalize_ip() that are called
from __sanitizer_cov_trace_pc() are also marked as notrace.
Link: http://lkml.kernel.org/r/20181128081239.18317-1-anders.roxell@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signen-off-by: Anders Roxell <anders.roxell@linaro.org>
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman reports a hackbench regression with psi that would prohibit
shipping the suse kernel with it default-enabled, but he'd still like
users to be able to opt in at little to no cost to others.
With the current combination of CONFIG_PSI and the psi_disabled bool set
from the commandline, this is a challenge. Do the following things to
make it easier:
1. Add a config option CONFIG_PSI_DEFAULT_DISABLED that allows distros
to enable CONFIG_PSI in their kernel but leave the feature disabled
unless a user requests it at boot-time.
To avoid double negatives, rename psi_disabled= to psi=.
2. Make psi_disabled a static branch to eliminate any branch costs
when the feature is disabled.
In terms of numbers before and after this patch, Mel says:
: The following is a comparision using CONFIG_PSI=n as a baseline against
: your patch and a vanilla kernel
:
: 4.20.0-rc4 4.20.0-rc4 4.20.0-rc4
: kconfigdisable-v1r1 vanilla psidisable-v1r1
: Amean 1 1.3100 ( 0.00%) 1.3923 ( -6.28%) 1.3427 ( -2.49%)
: Amean 3 3.8860 ( 0.00%) 4.1230 * -6.10%* 3.8860 ( -0.00%)
: Amean 5 6.8847 ( 0.00%) 8.0390 * -16.77%* 6.7727 ( 1.63%)
: Amean 7 9.9310 ( 0.00%) 10.8367 * -9.12%* 9.9910 ( -0.60%)
: Amean 12 16.6577 ( 0.00%) 18.2363 * -9.48%* 17.1083 ( -2.71%)
: Amean 18 26.5133 ( 0.00%) 27.8833 * -5.17%* 25.7663 ( 2.82%)
: Amean 24 34.3003 ( 0.00%) 34.6830 ( -1.12%) 32.0450 ( 6.58%)
: Amean 30 40.0063 ( 0.00%) 40.5800 ( -1.43%) 41.5087 ( -3.76%)
: Amean 32 40.1407 ( 0.00%) 41.2273 ( -2.71%) 39.9417 ( 0.50%)
:
: It's showing that the vanilla kernel takes a hit (as the bisection
: indicated it would) and that disabling PSI by default is reasonably
: close in terms of performance for this particular workload on this
: particular machine so;
Link: http://lkml.kernel.org/r/20181127165329.GA29728@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Change idx variable in DO_TRACE macro to __idx to avoid name conflicts.
A kvm event had "idx" as a parameter and it confused the macro.
- Fix a race where interrupts would be traced when set_graph_function was set.
The previous patch set increased a race window that tricked the function graph
tracer to think it should trace interrupts when it really should not have.
The bug has been there before, but was seldom hit. Only the last patch series
made it more common.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXACrFhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgUuAP9zZ0+PjDIXrkZATogEsMJ1OZKy5AiK
mwT7S85/ouOeCQEAi5JUcSfwB0caq2nYB1GKOKNfDH0ffeVR4wNykcYjngM=
=gjwC
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing fixes from Steven Rostedt:
"Two more fixes:
- Change idx variable in DO_TRACE macro to __idx to avoid name
conflicts. A kvm event had "idx" as a parameter and it confused the
macro.
- Fix a race where interrupts would be traced when set_graph_function
was set. The previous patch set increased a race window that
tricked the function graph tracer to think it should trace
interrupts when it really should not have.
The bug has been there before, but was seldom hit. Only the last
patch series made it more common"
* tag 'trace-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/fgraph: Fix set_graph_function from showing interrupts
tracepoint: Use __idx instead of idx in DO_TRACE macro to make it unique
was introduced by a patch that tried to fix one bug, but by doing so created
another bug. As both bugs corrupt the output (but they do not crash the
kernel), I decided to fix the design such that it could have both bugs
fixed. The original fix, fixed time reporting of the function graph tracer
when doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt the time
keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the other
use case was the graph call depth. Although, the two may be closely
related, where they got updated was the issue that lead to the two different
bugs that required the two use cases to be updated differently.
The big issue with this fix is that it requires changing each architecture.
The good news is, I was able to remove a lot of code that was duplicated
within the architectures and place it into a single location. Then I could
make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and before
doing so, I cross compiled all the affected architectures to make sure that
they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW/4NPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnWAAQCyUIRLgYImr81eTl52lxNRsULk+aiI
U29kRFWWU0c40AEA1X9sDF0MgOItbRGfZtnHTZEousXRDaDf4Fge2kF7Egg=
=liQ0
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While rewriting the function graph tracer, I discovered a design flaw
that was introduced by a patch that tried to fix one bug, but by doing
so created another bug.
As both bugs corrupt the output (but they do not crash the kernel), I
decided to fix the design such that it could have both bugs fixed. The
original fix, fixed time reporting of the function graph tracer when
doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt
the time keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the
other use case was the graph call depth. Although, the two may be
closely related, where they got updated was the issue that lead to the
two different bugs that required the two use cases to be updated
differently.
The big issue with this fix is that it requires changing each
architecture. The good news is, I was able to remove a lot of code
that was duplicated within the architectures and place it into a
single location. Then I could make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and
before doing so, I cross compiled all the affected architectures to
make sure that they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct"
* tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
sched, trace: Fix prev_state output in sched_switch tracepoint
function_graph: Have profiler use curr_ret_stack and not depth
function_graph: Reverse the order of pushing the ret_stack and the callback
function_graph: Move return callback before update of curr_ret_stack
function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack
function_graph: Make ftrace_push_return_trace() static
sparc/function_graph: Simplify with function_graph_enter()
sh/function_graph: Simplify with function_graph_enter()
s390/function_graph: Simplify with function_graph_enter()
riscv/function_graph: Simplify with function_graph_enter()
powerpc/function_graph: Simplify with function_graph_enter()
parisc: function_graph: Simplify with function_graph_enter()
nds32: function_graph: Simplify with function_graph_enter()
MIPS: function_graph: Simplify with function_graph_enter()
microblaze: function_graph: Simplify with function_graph_enter()
arm64: function_graph: Simplify with function_graph_enter()
ARM: function_graph: Simplify with function_graph_enter()
x86/function_graph: Simplify with function_graph_enter()
function_graph: Create function_graph_enter() to consolidate architecture code
The stackleak_erase() function is called on the trampoline stack at the
end of syscall. This stack is not big enough for ftrace and kprobes
operations, e.g. it can be exhausted if we use kprobe_events for
stackleak_erase().
So let's disable function tracing and kprobes of stackleak_erase().
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 10e9ae9fab ("gcc-plugins: Add STACKLEAK plugin for tracking the kernel stack")
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
The tracefs file set_graph_function is used to only function graph functions
that are listed in that file (or all functions if the file is empty). The
way this is implemented is that the function graph tracer looks at every
function, and if the current depth is zero and the function matches
something in the file then it will trace that function. When other functions
are called, the depth will be greater than zero (because the original
function will be at depth zero), and all functions will be traced where the
depth is greater than zero.
The issue is that when a function is first entered, and the handler that
checks this logic is called, the depth is set to zero. If an interrupt comes
in and a function in the interrupt handler is traced, its depth will be
greater than zero and it will automatically be traced, even if the original
function was not. But because the logic only looks at depth it may trace
interrupts when it should not be.
The recent design change of the function graph tracer to fix other bugs
caused the depth to be zero while the function graph callback handler is
being called for a longer time, widening the race of this happening. This
bug was actually there for a longer time, but because the race window was so
small it seldom happened. The Fixes tag below is for the commit that widen
the race window, because that commit belongs to a series that will also help
fix the original bug.
Cc: stable@kernel.org
Fixes: 39eb456dac ("function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch added name checking for the following types:
. BTF_KIND_PTR, BTF_KIND_ARRAY, BTF_KIND_VOLATILE,
BTF_KIND_CONST, BTF_KIND_RESTRICT:
the name must be null
. BTF_KIND_STRUCT, BTF_KIND_UNION: the struct/member name
is either null or a valid identifier
. BTF_KIND_ENUM: the enum type name is either null or a valid
identifier; the enumerator name must be a valid identifier.
. BTF_KIND_FWD: the name must be a valid identifier
. BTF_KIND_TYPEDEF: the name must be a valid identifier
For those places a valid name is required, the name must be
a valid C identifier. This can be relaxed later if we found
use cases for a different (non-C) frontend.
Fixes: 69b693f0ae ("bpf: btf: Introduce BPF Type Format (BTF)")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Function btf_name_valid_identifier() have been implemented in
bpf-next commit 2667a2626f ("bpf: btf: Add BTF_KIND_FUNC and
BTF_KIND_FUNC_PROTO"). Backport this function so later patch
can use it.
Fixes: 69b693f0ae ("bpf: btf: Introduce BPF Type Format (BTF)")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from David Miller:
1) ARM64 JIT fixes for subprog handling from Daniel Borkmann.
2) Various sparc64 JIT bug fixes (fused branch convergance, frame
pointer usage detection logic, PSEODU call argument handling).
3) Fix to use BH locking in nf_conncount, from Taehee Yoo.
4) Fix race of TX skb freeing in ipheth driver, from Bernd Eckstein.
5) Handle return value of TX NAPI completion properly in lan743x
driver, from Bryan Whitehead.
6) MAC filter deletion in i40e driver clears wrong state bit, from
Lihong Yang.
7) Fix use after free in rionet driver, from Pan Bian.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits)
s390/qeth: fix length check in SNMP processing
net: hisilicon: remove unexpected free_netdev
rapidio/rionet: do not free skb before reading its length
i40e: fix kerneldoc for xsk methods
ixgbe: recognize 1000BaseLX SFP modules as 1Gbps
i40e: Fix deletion of MAC filters
igb: fix uninitialized variables
netfilter: nf_tables: deactivate expressions in rule replecement routine
lan743x: Enable driver to work with LAN7431
tipc: fix lockdep warning during node delete
lan743x: fix return value for lan743x_tx_napi_poll
net: via: via-velocity: fix spelling mistake "alignement" -> "alignment"
qed: fix spelling mistake "attnetion" -> "attention"
net: thunderx: fix NULL pointer dereference in nic_remove
sctp: increase sk_wmem_alloc when head->truesize is increased
firestream: fix spelling mistake: "Inititing" -> "Initializing"
net: phy: add workaround for issue where PHY driver doesn't bind to the device
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
sparc: Adjust bpf JIT prologue for PSEUDO calls.
bpf, doc: add entries of who looks over which jits
...
The IBPB control code in x86 removed the usage. Remove the functionality
which was introduced for this.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Casey Schaufler <casey.schaufler@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Waiman Long <longman9394@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dave Stewart <david.c.stewart@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185005.559149393@linutronix.de
arch_smt_update() is only called when the sysfs SMT control knob is
changed. This means that when SMT is enabled in the sysfs control knob the
system is considered to have SMT active even if all siblings are offline.
To allow finegrained control of the speculation mitigations, the actual SMT
state is more interesting than the fact that siblings could be enabled.
Rework the code, so arch_smt_update() is invoked from each individual CPU
hotplug function, and simplify the update function while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Casey Schaufler <casey.schaufler@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Waiman Long <longman9394@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dave Stewart <david.c.stewart@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185004.521974984@linutronix.de
Make the scheduler's 'sched_smt_present' static key globaly available, so
it can be used in the x86 speculation control code.
Provide a query function and a stub for the CONFIG_SMP=n case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Casey Schaufler <casey.schaufler@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Waiman Long <longman9394@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dave Stewart <david.c.stewart@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185004.430168326@linutronix.de
Currently the 'sched_smt_present' static key is enabled when at CPU bringup
SMT topology is observed, but it is never disabled. However there is demand
to also disable the key when the topology changes such that there is no SMT
present anymore.
Implement this by making the key count the number of cores that have SMT
enabled.
In particular, the SMT topology bits are set before interrrupts are enabled
and similarly, are cleared after interrupts are disabled for the last time
and the CPU dies.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Casey Schaufler <casey.schaufler@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Waiman Long <longman9394@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dave Stewart <david.c.stewart@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185004.246110444@linutronix.de
The profiler uses trace->depth to find its entry on the ret_stack, but the
depth may not match the actual location of where its entry is (if an
interrupt were to preempt the processing of the profiler for another
function, the depth and the curr_ret_stack will be different).
Have it use the curr_ret_stack as the index to find its ret_stack entry
instead of using the depth variable, as that is no longer guaranteed to be
the same.
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The function graph profiler uses the ret_stack to store the "subtime" and
reuse it by nested functions and also on the return. But the current logic
has the profiler callback called before the ret_stack is updated, and it is
just modifying the ret_stack that will later be allocated (it's just lucky
that the "subtime" is not touched when it is allocated).
This could also cause a crash if we are at the end of the ret_stack when
this happens.
By reversing the order of the allocating the ret_stack and then calling the
callbacks attached to a function being traced, the ret_stack entry is no
longer used before it is allocated.
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In the past, curr_ret_stack had two functions. One was to denote the depth
of the call graph, the other is to keep track of where on the ret_stack the
data is used. Although they may be slightly related, there are two cases
where they need to be used differently.
The one case is that it keeps the ret_stack data from being corrupted by an
interrupt coming in and overwriting the data still in use. The other is just
to know where the depth of the stack currently is.
The function profiler uses the ret_stack to save a "subtime" variable that
is part of the data on the ret_stack. If curr_ret_stack is modified too
early, then this variable can be corrupted.
The "max_depth" option, when set to 1, will record the first functions going
into the kernel. To see all top functions (when dealing with timings), the
depth variable needs to be lowered before calling the return hook. But by
lowering the curr_ret_stack, it makes the data on the ret_stack still being
used by the return hook susceptible to being overwritten.
Now that there's two variables to handle both cases (curr_ret_depth), we can
move them to the locations where they can handle both cases.
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, the depth of the ret_stack is determined by curr_ret_stack index.
The issue is that there's a race between setting of the curr_ret_stack and
calling of the callback attached to the return of the function.
Commit 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling
trace return callback") moved the calling of the callback to after the
setting of the curr_ret_stack, even stating that it was safe to do so, when
in fact, it was the reason there was a barrier() there (yes, I should have
commented that barrier()).
Not only does the curr_ret_stack keep track of the current call graph depth,
it also keeps the ret_stack content from being overwritten by new data.
The function profiler, uses the "subtime" variable of ret_stack structure
and by moving the curr_ret_stack, it allows for interrupts to use the same
structure it was using, corrupting the data, and breaking the profiler.
To fix this, there needs to be two variables to handle the call stack depth
and the pointer to where the ret_stack is being used, as they need to change
at two different locations.
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As all architectures now call function_graph_enter() to do the entry work,
no architecture should ever call ftrace_push_return_trace(). Make it static.
This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Make fetching of the BPF call address from ppc64 JIT generic. ppc64
was using a slightly different variant rather than through the insns'
imm field encoding as the target address would not fit into that space.
Therefore, the target subprog number was encoded into the insns' offset
and fetched through fp->aux->func[off]->bpf_func instead. Given there
are other JITs with this issue and the mechanism of fetching the address
is JIT-generic, move it into the core as a helper instead. On the JIT
side, we get information on whether the retrieved address is a fixed
one, that is, not changing through JIT passes, or a dynamic one. For
the former, JITs can optimize their imm emission because this doesn't
change jump offsets throughout JIT process.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently all the architectures do basically the same thing in preparing the
function graph tracer on entry to a function. This code can be pulled into a
generic location and then this will allow the function graph tracer to be
fixed, as well as extended.
Create a new function graph helper function_graph_enter() that will call the
hook function (ftrace_graph_entry) and the shadow stack operation
(ftrace_push_return_trace), and remove the need of the architecture code to
manage the shadow stack.
This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Daniel Borkmann says:
====================
pull-request: bpf 2018-11-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix an off-by-one bug when adjusting subprog start offsets after
patching, from Edward.
2) Fix several bugs such as overflow in size allocation in queue /
stack map creation, from Alexei.
3) Fix wrong IPv6 destination port byte order in bpf_sk_lookup_udp
helper, from Andrey.
4) Fix several bugs in bpftool such as preventing an infinite loop
in get_fdinfo, error handling and man page references, from Quentin.
5) Fix a warning in bpf_trace_printk() that wasn't catching an
invalid format string, from Martynas.
6) Fix a bug in BPF cgroup local storage where non-atomic allocation
was used in atomic context, from Roman.
7) Fix a NULL pointer dereference bug in bpftool from reallocarray()
error handling, from Jakub and Wen.
8) Add a copy of pkt_cls.h and tc_bpf.h uapi headers to the tools
include infrastructure so that bpftool compiles on older RHEL7-like
user space which does not ship these headers, from Yonghong.
9) Fix BPF kselftests for user space where to get ping test working
with ping6 and ping -6, from Li.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A format string consisting of "%p" or "%s" followed by an invalid
specifier (e.g. "%p%\n" or "%s%") could pass the check which
would make format_decode (lib/vsprintf.c) to warn.
Fixes: 9c959c863f ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit:
142b18ddc8 ("uprobes: Fix handle_swbp() vs unregister() + register() race")
added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb()
memory barriers, to ensure that handle_swbp() uses fully-initialized
uprobes only.
However, the smp_rmb() is mis-placed: this barrier should be placed
after handle_swbp() has tested for the flag, thus guaranteeing that
(program-order) subsequent loads from the uprobe can see the initial
stores performed by prepare_uprobe().
Move the smp_rmb() accordingly. Also amend the comments associated
to the two memory barriers to indicate their actual locations.
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@kernel.org
Fixes: 142b18ddc8 ("uprobes: Fix handle_swbp() vs unregister() + register() race")
Link: http://lkml.kernel.org/r/20181122161031.15179-1-andrea.parri@amarulasolutions.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If swiotlb_bounce_page() failed, calling arch_sync_dma_for_device() may
lead to such delights as performing cache maintenance on whatever
address phys_to_virt(SWIOTLB_MAP_ERROR) looks like, which is typically
outside the kernel memory map and goes about as well as expected.
Don't do that.
Fixes: a4a4330db4 ("swiotlb: add support for non-coherent DMA")
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Merge misc fixes from Andrew Morton:
"16 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/memblock.c: fix a typo in __next_mem_pfn_range() comments
mm, page_alloc: check for max order in hot path
scripts/spdxcheck.py: make python3 compliant
tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset
lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn
mm/vmstat.c: fix NUMA statistics updates
mm/gup.c: fix follow_page_mask() kerneldoc comment
ocfs2: free up write context when direct IO failed
scripts/faddr2line: fix location of start_kernel in comment
mm: don't reclaim inodes with many attached pages
mm, memory_hotplug: check zone_movable in has_unmovable_pages
mm/swapfile.c: use kvzalloc for swap_info_struct allocation
MAINTAINERS: update OMAP MMC entry
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
kernel/sched/psi.c: simplify cgroup_move_task()
z3fold: fix possible reclaim races
Pull scheduler fix from Ingo Molnar:
"Fix an exec() related scalability/performance regression, which was
caused by incorrectly calculating load and migrating tasks on exec()
when they shouldn't be"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix cpu_util_wake() for 'execl' type workloads
The existing code triggered an invalid warning about 'rq' possibly being
used uninitialized. Instead of doing the silly warning suppression by
initializa it to NULL, refactor the code to bail out early instead.
Warning was:
kernel/sched/psi.c: In function `cgroup_move_task':
kernel/sched/psi.c:639:13: warning: `rq' may be used uninitialized in this function [-Wmaybe-uninitialized]
Link: http://lkml.kernel.org/r/20181103183339.8669-1-olof@lixom.net
Fixes: 2ce7135adc ("psi: cgroup support")
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When patching in a new sequence for the first insn of a subprog, the start
of that subprog does not change (it's the first insn of the sequence), so
adjust_subprog_starts should check start <= off (rather than < off).
Also added a test to test_verifier.c (it's essentially the syz reproducer).
Fixes: cc8b0b92a1 ("bpf: introduce function calls (function boundaries)")
Reported-by: syzbot+4fc427c7af994b0948be@syzkaller.appspotmail.com
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I replaced the code comments with
a proper "fall through" annotation, which is what GCC is expecting
to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I replaced the code comments with
a proper "fall through" annotation, which is what GCC is expecting
to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Replace the whole switch statement with a for loop. This makes the
code clearer and easy to read.
This also addresses the following Coverity warnings:
Addresses-Coverity-ID: 115090 ("Missing break in switch")
Addresses-Coverity-ID: 115091 ("Missing break in switch")
Addresses-Coverity-ID: 114700 ("Missing break in switch")
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
[daniel.thompson@linaro.org: Tiny grammar change in description]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
gcc 8.1.0 warns with:
kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’:
kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
strncpy(prefix_name, name, strlen(name)+1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/debug/kdb/kdb_support.c:239:31: note: length computed here
Use strscpy() with the destination buffer size, and use ellipses when
displaying truncated symbols.
v2: Use strscpy()
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Jonathan Toppins <jtoppins@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Since commit ad67b74d24 ("printk: hash addresses printed with %p"),
all pointers printed with %p are printed with hashed addresses
instead of real addresses in order to avoid leaking addresses in
dmesg and syslog. But this applies to kdb too, with is unfortunate:
Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry
kdb> ps
15 sleeping system daemon (state M) processes suppressed,
use 'ps A' to see all.
Task Addr Pid Parent [*] cpu State Thread Command
0x(ptrval) 329 328 1 0 R 0x(ptrval) *sh
0x(ptrval) 1 0 0 0 S 0x(ptrval) init
0x(ptrval) 3 2 0 0 D 0x(ptrval) rcu_gp
0x(ptrval) 4 2 0 0 D 0x(ptrval) rcu_par_gp
0x(ptrval) 5 2 0 0 D 0x(ptrval) kworker/0:0
0x(ptrval) 6 2 0 0 D 0x(ptrval) kworker/0:0H
0x(ptrval) 7 2 0 0 D 0x(ptrval) kworker/u2:0
0x(ptrval) 8 2 0 0 D 0x(ptrval) mm_percpu_wq
0x(ptrval) 10 2 0 0 D 0x(ptrval) rcu_preempt
The whole purpose of kdb is to debug, and for debugging real addresses
need to be known. In addition, data displayed by kdb doesn't go into
dmesg.
This patch replaces all %p by %px in kdb in order to display real
addresses.
Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
On a powerpc 8xx, 'btc' fails as follows:
Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0x0
when booting the kernel with 'debug_boot_weak_hash', it fails as well
Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0xba99ad80
On other platforms, Oopses have been observed too, see
https://github.com/linuxppc/linux/issues/139
This is due to btc calling 'btt' with %p pointer as an argument.
This patch replaces %p by %px to get the real pointer value as
expected by 'btt'
Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
A ~10% regression has been reported for UnixBench's execl throughput
test by Aaron Lu and Ye Xiaolong:
https://lkml.org/lkml/2018/10/30/765
That test is pretty simple, it does a "recursive" execve() syscall on the
same binary. Starting from the syscall, this sequence is possible:
do_execve()
do_execveat_common()
__do_execve_file()
sched_exec()
select_task_rq_fair() <==| Task already enqueued
find_idlest_cpu()
find_idlest_group()
capacity_spare_wake() <==| Functions not called from
cpu_util_wake() | the wakeup path
which means we can end up calling cpu_util_wake() not only from the
"wakeup path", as its name would suggest. Indeed, the task doing an
execve() syscall is already enqueued on the CPU we want to get the
cpu_util_wake() for.
The estimated utilization for a CPU computed in cpu_util_wake() was
written under the assumption that function can be called only from the
wakeup path. If instead the task is already enqueued, we end up with a
utilization which does not remove the current task's contribution from
the estimated utilization of the CPU.
This will wrongly assume a reduced spare capacity on the current CPU and
increase the chances to migrate the task on execve.
The regression is tracked down to:
commit d519329f72 ("sched/fair: Update util_est only on util_avg updates")
because in that patch we turn on by default the UTIL_EST sched feature.
However, the real issue is introduced by:
commit f9be3e5961 ("sched/fair: Use util_est in LB and WU paths")
Let's fix this by ensuring to always discount the task estimated
utilization from the CPU's estimated utilization when the task is also
the current one. The same benchmark of the bug report, executed on a
dual socket 40 CPUs Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz machine,
reports these "Execl Throughput" figures (higher the better):
mainline : 48136.5 lps
mainline+fix : 55376.5 lps
which correspond to a 15% speedup.
Moreover, since {cpu_util,capacity_spare}_wake() are not really only
used from the wakeup path, let's remove this ambiguity by using a better
matching name: {cpu_util,capacity_spare}_without().
Since we are at that, let's also improve the existing documentation.
Reported-by: Aaron Lu <aaron.lu@intel.com>
Reported-by: Ye Xiaolong <xiaolong.ye@intel.com>
Tested-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Fixes: f9be3e5961 (sched/fair: Use util_est in LB and WU paths)
Link: https://lore.kernel.org/lkml/20181025093100.GB13236@e110439-lin/
Signed-off-by: Ingo Molnar <mingo@kernel.org>
