Commit Graph

2331 Commits

Author SHA1 Message Date
Yoshihiro Shimoda
0c1c8ff32f dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver
This DMAC is Renesas USB high-speed module DMA controller that
supports slave transfer.

This USB-DMAC has similar register sets with R-Car Gen2 DMAC, but
the USB-DMAC has specific registers to control the USB transactions.
If this code is added into the rcar-dmac driver, it will become
unreadable. So, this driver is independent from the rcar-dmac.

And, this USB-DMAC uses virt-dma infrastructure.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-02 12:57:32 +05:30
Petr Kulhavy
ab7add30ce dmaengine: edma: fixed wrongly initialized data parameter to the edma callback
The "data" parameter passed indirectly to the edma_callback() should be
edma_chan and not the dma_chan.

This bug was so far harmless since the offset of struct dma_chan within struct
edma_chan is 0. However as soon as someone changes struct edma_chan this would
cause troubles.

Signed-off-by: Petr Kulhavy <petr@barix.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-01 09:15:57 +05:30
Stefan Agner
de6b641e2d dmaengine: ste_dma40: fix implicit conversion
The function d40_prep_sg takes the type enum dma_transfer_direction
as second last parameter. However, the memcpy calls pass DMA_NONE
which is of type enum dma_data_direction. Fix this by passing the
actual transfer direction DMA_MEM_TO_MEM.

This does not change the actual code flow since only the transfer
direction DMA_MEM_TO_DEV and DMA_DEV_TO_MEM are actually used in the
function d40_prep_sg.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-01 09:10:22 +05:30
Alex Smith
d894fc6046 dmaengine: jz4780: add driver for the Ingenic JZ4780 DMA controller
This patch adds a driver for the DMA controller found in the Ingenic
JZ4780.

It currently does not implement any support for the programmable firmware
feature of the controller - this is not necessary for most uses. It also
does not take priority into account when allocating channels, it just
allocates the first available channel. This can be implemented later.

Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
[Updated for dmaengine api changes, Add residue support, couple of minor fixes]
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-01 08:43:49 +05:30
Vinod Koul
381a3c4a33 Merge branch 'topic/alloc_removal' into for-linus 2015-03-18 22:46:19 +05:30
Vinod Koul
2fcb9e3c86 dmaengine: sun6i: remove device_alloc_chan_resources handler
Now that device_alloc_chan_resources handler in not mandatory, remove dummy
implementations

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18 22:45:52 +05:30
Vinod Koul
7595c5717f dmaengine: sa11x0: remove device_alloc_chan_resources handler
Now that device_alloc_chan_resources handler in not mandatory, remove dummy
implementations

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18 22:45:49 +05:30
Vinod Koul
b07064aa08 dmaengine: s3c24xx: remove device_alloc_chan_resources handler
Now that device_alloc_chan_resources handler in not mandatory, remove dummy
implementations

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18 22:45:36 +05:30
Vinod Koul
c509c495c0 dmaengine: k3dma: remove device_alloc_chan_resources handler
Now that device_alloc_chan_resources handler in not mandatory, remove dummy
implementations

Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18 22:45:11 +05:30
Vinod Koul
f265958a6b dmaengine: img-mdc: remove device_alloc_chan_resources handler
Now that device_alloc_chan_resources handler in not mandatory, remove dummy
implementations

Acked-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18 22:44:58 +05:30
Vinod Koul
3d32b2506d dmaengine: jz4740: remove device_alloc_chan_resources handler
Now that device_alloc_chan_resources handler in not mandatory, remove dummy
implementations

Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18 22:44:43 +05:30
Vinod Koul
16cab61800 dmaengine: amba-pl08x:remove device_alloc_chan_resources handler
Now that device_alloc_chan_resources handler in not mandatory, remove dummy
implementations

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18 22:44:27 +05:30
Ben Dooks
75967b788c dmaengine: pl330: fix return status on pending transfers
The pl330_tx_status() function returns the desc->status if the
dma_cookie_status() call does indicate the cookie completed,
however the desc->status is not look directly compatible. Sparse
throws the following warning:

pl330.c:2262:35: warning: mixing different enum types
pl330.c:2262:35:     int enum desc_status  versus
pl330.c:2262:35:     int enum dma_status

Attempt to fix this by adding a switch statement to turn the
desc->status into a dma_status.

Note, this has only been tested with the dmatest suite.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
--
Vinod Koul <vinod.koul@intel.com>
Dan Williams <dan.j.williams@intel.com>
DMA List <dmaengine@vger.kernel.org>
Maxime Ripard <maxime.ripard@free-electrons.com>
Jassi Brar <jassisinghbrar@gmail.com>
Liviu Dudau <Liviu.Dudau@arm.com>
Linux ARM Kernel <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18 22:41:49 +05:30
Ben Dooks
5503aed811 dmaengine: pl330: make unexported functions static
Whilst running sparse on pl330 driver it was noticed there are
two functions that are not static but not exported to any other
users in the kernel.

Fix the following warnings by making 'pl330_pause' and the
'pl330_get_current_xferred_count' static:

pl330.c:2165:5: warning: symbol 'pl330_pause' was not declared. Should it be static?
pl330.c:2206:5: warning: symbol 'pl330_get_current_xferred_count' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
--
Vinod Koul <vinod.koul@intel.com>
Dan Williams <dan.j.williams@intel.com>
DMA List <dmaengine@vger.kernel.org>
Maxime Ripard <maxime.ripard@free-electrons.com>
Jassi Brar <jassisinghbrar@gmail.com>
Liviu Dudau <Liviu.Dudau@arm.com>
Linux ARM Kernel <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18 22:41:49 +05:30
Ben Dooks
3a2307f72e dmaengine: pl330: fix issues with big-endian armv7
When running Xilinx Zynq in big-endian mode the pl330 driver
fails to pass the dmatest suite. To fix this, ensure all non
byte values are written in little endian.

As a note, the documentation does not mention if it will do
big-endian descriptor fetches, only that it will swap the
data in flight.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
--
Vinod Koul <vinod.koul@intel.com>
Dan Williams <dan.j.williams@intel.com>
DMA List <dmaengine@vger.kernel.org>
Maxime Ripard <maxime.ripard@free-electrons.com>
Jassi Brar <jassisinghbrar@gmail.com>
Liviu Dudau <Liviu.Dudau@arm.com>
Linux ARM Kernel <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18 22:41:48 +05:30
Fabian Frederick
57c0342239 dmaengine: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18 22:13:14 +05:30
Fabio Estevam
a572460be9 dmaengine: imx-sdma: Add support for version 3 firmware
Currently when version 3.1 of the mx6q SDMA firmware is used we get:

[    0.392169] imx-sdma 20ec000.sdma: unknown firmware version
[    0.399281] imx-sdma 20ec000.sdma: initialized

Add support for it.

Based on a patch from Shengjiu Wang from the internal FSL kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18 13:53:33 +05:30
Kedareswara rao Appana
937abe88ae dmaengine: xilinx-dma: move header file to common location
This patch moves the xilinx_dma.h header file
to the include/linux/dma.

Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-17 16:23:21 +05:30
Jarkko Nikula
3b62286d0e dmaengine: Remove FSF mailing addresses
Free Software Foundation mailing address has been moved in the past and some
of the addresses here are outdated. Remove them from file headers since the
COPYING file in the kernel sources includes it.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16 22:28:15 +05:30
Archit Taneja
d51da4d4a9 dmaengine: qcom_bam_dma: Add support for BAM v1.7.0
Add register offset table entry for the newer (v1.7.0) version of the BAM IP
found on MSM8916. Update the DT bindings documentation.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16 22:21:47 +05:30
Jarkko Nikula
b26072276f dmaengine: dw: Make error prints unique. Part #2
The same error message is printed from different switch cases. Since both of
these jump into same error label we can move error print there and add a DMA
direction in order to make it easier to grep error from sources.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16 22:11:06 +05:30
Jarkko Nikula
550da64bc8 dmaengine: dw: Make error prints unique. Part #1
The same error message is printed from different functions. Add a function
name to error message in order to make it easier to grep error from sources.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16 22:10:51 +05:30
Torsten Fleischer
265567fbca dmaengine: at_hdmac: Add support for memory to memory sg transfers
This patch adds support for memory to memory scatter-gather transfers.

Changes from V1:
   * Fixed coding style of the multi-line comments.

Changes from V2:
   * Added setup of 'desc->tx_width' that is needed to calculate the
     residue.

Signed-off-by: Torsten Fleischer <torfl6749@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-13 14:57:54 +05:30
Tapasweni Pathak
26f7af37ee dmaengine: jz4740: Remove extra check
Remove double check on chan->desc.

Found by Coccinelle.

Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-05 22:08:46 +05:30
Maxime Ripard
bfde98bd76 dmaengine: Remove net_dma_find_channel
Since commit 7bced39751 ("net_dma: simple removal") removed the net_dma
support entirely, net_dma_find_channel has no users left. Remove the function
entirely.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-05 21:46:48 +05:30
Colin Ian King
ee655c2968 dmaengine: s3c24xx: Fix spelling mistake in dev_err mistake
Fix spelling mistake, "aquire" -> "acquire" and missing newline (as
spotted by Joe Perches.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-02 22:18:57 +05:30
Pramod Gurav
81ceefa49e dmaengine: qcom_bam_dma: Fix error path in probe function
Calls tasklet_kill() in error path of the probe function were missing.
Add the same in error path.

Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-23 16:56:13 +05:30
Linus Torvalds
ce1d3fde87 Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
 "This update brings:

   - the big cleanup up by Maxime for device control and slave
     capabilities.  This makes the API much cleaner.

   - new IMG MDC driver by Andrew

   - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with
     bunch of fixes on rcar drivers

   - odd fixes and updates spread over driver"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits)
  dmaengine: pl330: add DMA_PAUSE feature
  dmaengine: pl330: improve pl330_tx_status() function
  dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
  dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
  dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
  dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
  dmaengine: rcar-dmac: Fix spinlock issues in interrupt
  dmaenegine: edma: fix sparse warnings
  dmaengine: rcar-dmac: Fix uninitialized variable usage
  dmaengine: shdmac: extend PM methods
  dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
  dmaengine: pl330: fix bug that cause start the same descs in cyclic
  dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers
  dmaengine: at_xdmac: simplify channel configuration stuff
  dmaengine: at_xdmac: introduce save_cc field
  dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel
  ioat: fail self-test if wait_for_completion times out
  dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
  dmaengine: dw: amend description of dma_dev field
  dmatest: move src_off, dst_off, len inside loop
  ...
2015-02-18 08:49:20 -08:00
Linus Torvalds
ea7531ac4a ARM: SoC cleanups
This is a good healthy set of various code removals. Total net delta is 8100
 lines removed.
 
 Among the larger cleanups are:
 
 - Removal of old Samsung S3C DMA infrastructure by Arnd
 - Removal of the non-DT version of the 'lager' board by Magnus Damm
 - General stale code removal on OMAP and Davinci by Rickard Strandqvist
 - Removal of non-DT support on am3517 platforms by Tony Lindgren
 
 ... plus several other cleanups of various platforms across the board.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4uYeAAoJEIwa5zzehBx3v58P/RGKt5e4CgCdHKjVhbPmADSE
 FVECT4qrIkf4dFgU5qPCBDCtQn/B3ljxZnq6Hqi8VxYD+pRcXt94R50ZyhGUZ6QF
 GLXU8jDSlY906uJwW+CHZFVLmDjTM4ONLn1ZMRtcdOrU3yGC5rZq9+Kla6ZIE6jb
 mUAFMj6e+NBPYDonq93G7968EdyLJOtK4B2ylPW0+wgSRGIEPibCiNi9yyN4hBFr
 LiaOyY/execKUo2K2BFWkfAZWt7GrwBu/qAkz/9YDRDiikLwFG2UBWbaik5Fj8tf
 v8wvpL6Af6iLpRx1wI/HoCgjFS/g/n4O3svMe7aHGyfrkEAxNtoCKlFscO8w/aLc
 eABNAb5j65it8IHvQMR5RhgqWoQe4XMlDcwsxotTe64GfxpTahdhDmhk7RKAY9Xq
 MyITvtZPTPHTSZHNEDE3HtgHn62ndSinYFhdTaBi2FQxLNCUFl2TKZxpb0r65JI/
 2yOf6hcgWGTgV1VOruAc5SHcSkQOY3SptM4n4F1B0VcDrCphBDYhRTdokELFJIIq
 I47Week8o0f+a4ot/sf0QhU68wVZENgUJO3/Q5Buta+UGSZa4NYH7Ymc159e7hGS
 k+7mCeTJC85F0H/EBWvCcZzbpwiq7jBRAY2PhqYF1EQkefdR/+28o1sX090fVaXD
 n0gXv3/ZDvJB2ryv8lR/
 =tsjK
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This is a good healthy set of various code removals.  Total net delta
  is 8100 lines removed.

  Among the larger cleanups are:

   - Removal of old Samsung S3C DMA infrastructure by Arnd
   - Removal of the non-DT version of the 'lager' board by Magnus Damm
   - General stale code removal on OMAP and Davinci by Rickard Strandqvist
   - Removal of non-DT support on am3517 platforms by Tony Lindgren

  ... plus several other cleanups of various platforms across the board"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits)
  ARM: sirf: drop redundant function and marco declaration
  arm: omap: specify PMUs are for ARMv7 CPUs
  arm: shmobile: specify PMUs are for ARMv7 CPUs
  arm: iop: specify PMUs are for XScale CPUs
  arm: pxa: specify PMUs are for XScale CPUs
  arm: realview: specify PMU types
  ARM: SAMSUNG: remove unused DMA infrastructure
  ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC
  ARM: davinci: Remove CDCE949 driver
  ARM: at91: remove useless at91rm9200_set_type()
  ARM: at91: remove useless at91rm9200_dt_initialize()
  ARM: at91: move debug-macro.S into the common space
  ARM: at91: remove useless at91_sysirq_mask_rtx
  ARM: at91: remove useless config MACH_AT91SAM9_DT
  ARM: at91: remove useless config MACH_AT91RM9200_DT
  ARM: at91: remove unused mach/memory.h
  ARM: at91: remove useless header file includes
  ARM: at91: remove unneeded header file
  rtc: at91/Kconfig: remove useless options
  ARM: at91/Documentation: add a README for Atmel SoCs
  ...
2015-02-17 09:17:33 -08:00
Robert Baldyga
88987d2c75 dmaengine: pl330: add DMA_PAUSE feature
DMA_PAUSE command is used for halting DMA transfer on chosen channel.
It can be useful when we want to safely read residue before terminating
all requests on channel. Otherwise there can be situation when some data
is transferred before channel termination but after reading residue,
which obviously results with data loss. To avoid this situation we can
pause channel, read residue and then terminate all requests.
This scenario is common, for example, in serial port drivers.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-16 09:33:36 +05:30
Robert Baldyga
aee4d1fac8 dmaengine: pl330: improve pl330_tx_status() function
This patch adds possibility to read residue of DMA transfer. It's useful
when we want to know how many bytes have been transferred before we
terminate channel. It can take place, for example, on timeout interrupt.

Signed-off-by: Lukasz Czerwinski <l.czerwinski@samsung.com>
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-16 09:33:35 +05:30
Laurent Pinchart
be6893e195 dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
A still unconfirmed hardware bug prevents the IPMMU microTLB 0 to be
flushed correctly, resulting in memory corruption. DMAC 0 channel 0 is
connected to microTLB 0 on currently supported platforms, so we can't
use it with the IPMMU. As the IOMMU API operates at the device level we
can't disable it selectively, so ignore channel 0 for now if the device
is part of an IOMMU group.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-16 09:33:35 +05:30
Laurent Pinchart
3f46306127 dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
When descriptor memory is accessed through an IOMMU the DMADAR register
isn't initialized automatically from the first descriptor at beginning
of transfer by the DMAC like it should. Initialize it manually with the
destination address of the first chunk.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-16 09:33:34 +05:30
Laurent Pinchart
6a634808e3 dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
When wired to an IOMMU to access data, the DMAC accesses the hardware
descriptors through the IOMMU as well. We're using the DMA mapping API
to allocate the descriptors, but with a NULL device at the moment, which
prevents IOMMU mappings from being created. Fix this by passing the DMAC
device instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-16 09:33:33 +05:30
Laurent Pinchart
f7638c904b dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
The error interrupt handler stops and reinitializes all channels. This
causes a crash for channels that have never been used, as their
descriptor lists are uninitialized. Fix it by initializing the
descriptor lists at probe time.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-16 09:33:33 +05:30
Laurent Pinchart
f39150720e dmaengine: rcar-dmac: Fix spinlock issues in interrupt
The rcar_dmac_desc_put() function is called in interrupt context and
must thus use spin_lock_irqsave() instead of spin_lock_irq().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-16 09:33:32 +05:30
Lad, Prabhakar
b7a4fd53d2 dmaenegine: edma: fix sparse warnings
this patch fixes following sparse warnings:

edma.c:537:32: warning: symbol 'edma_prep_dma_memcpy' was not declared. Should it be static?
edma.c:1070:6: warning: symbol 'edma_filter_fn' was not declared. Should it be static?

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-16 09:33:32 +05:30
Laurent Pinchart
a55e07c8a5 dmaengine: rcar-dmac: Fix uninitialized variable usage
The desc variable is used uninitialized in the rcar_dmac_desc_get() and
rcar_dmac_xfer_chunk_get() functions if descriptors need to be
allocated. Fix it.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-12 12:52:19 +05:30
Sergei Shtylyov
bf44a4175e dmaengine: shdmac: extend PM methods
In order to make it possible to restore from hibernation not only in Linux but
also in e.g. U-Boot, we have to use sh_dmae_{suspend|resume}() for the {freeze|
thaw|restore}() PM methods. It's handy to achieve this with SIMPLE_DEV_PM_OPS()
macro; since  that macro doesn't do anything when CONFIG_PM_SLEEP  is undefined,
we don't need to #define sh_dmae_{suspend|resume} NULL anymore but we'll have to
enclose sh_dmae_{suspend|resume}() into the new #ifdef...

Based on original patch by Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-12 12:52:18 +05:30
Sergei Shtylyov
82bf90c628 dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
Use SET_RUNTIME_PM_OPS() to initialize the runtime PM method pointers in the
'struct dev_pm_ops';  since that macro doesn't  do anything  if CONFIG_PM is
not defined, we have  to move #ifdef up to also cover the runtime PM methods
in order to avoid compilation warnings.

Based on orignal patch by Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-12 12:52:17 +05:30
Addy Ke
0091b9d6c1 dmaengine: pl330: fix bug that cause start the same descs in cyclic
This bug will cause NULL pointer after commit dfac17, and cause
wrong package in I2S DMA transfer before commit dfac17.

Tested on RK3288-pinky2 board.

Detail:
I2S DMA transfer(sound/core/pcm_dmaengine.c):
dmaengine_pcm_prepare_and_submit -->
dmaengine_prep_dma_cyclic -->
pl330_prep_dma_cyclic -->
the case:
1. pl330_submit_req(desc0): thrd->req[0].desc = desc0, thrd->lstenq = 0
2. pl330_submit_req(desc1): thrd->req[1].desc = desc1, thrd->lstenq = 1
3. _start(desc0) by submit_req: thrd->req_running = 0
   because: idx = 1 - thrd->lstenq = 0
4. pl330_update(desc0 OK): thrd->req[0].desc = NULL, desc0 to req_done list
   because: idx = active = thrd->req_running = 0
5. _start(desc1) by pl330_update: thrd->req_running = 1
   because:
   idx = 1 - thrd->lstenq = 0, but thrd->req[0].desc == NULL,
   so:
   idx = thrd->lstenq = 1
6. pl330_submit_req(desc2): thrd->req[0].desc = desc2, thrd->lstenq = 0
7. _start(desc1) by submit_req: thrd->req_running = 1
   because: idx = 1 - thrd->lstenq = 1
   Note: _start started the same descs
         _start should start desc2 here, NOT desc1

8. pl330_update(desc1 OK): thrd->req[1].desc = NULL, desc1 to req_done list
   because: idx = active = thrd->req_running = 1
9. _start(desc2) by pl330_update : thrd->req_running = 0
   because: idx = 1 - thrd->lstenq = 0
10.pl330_update(desc1 OK, NOT desc2): thrd->req[0].desc = NULL,
   desc2 to req_done list
   because: idx = active = thrd->req_running = 0

11.pl330_submit_req(desc3): thrd->req[0].desc = desc3, thrd->lstenq = 0
12.pl330_submit_req(desc4): thrd->req[1].desc = desc4, thrd->lstenq = 1
13._start(desc3) by submit_req: thrd->req_running = 0
   because: idx = 1 - thrd->lstenq = 0
14.pl330_update(desc2 OK NOT desc3): thrd->req[0].desc = NULL
   desc3 to req_done list
   because: idx = active = thrd->req_running = 0
15._start(desc4) by pl330_update: thrd->req_running = 1
   because:
   idx = 1 - thrd->lstenq = 0, but thrd->req[0].desc == NULL,
   so:
   idx = thrd->lstenq = 1
16.pl330_submit_req(desc5): thrd->req[0].desc = desc5, thrd->lstenq = 0
17._start(desc4) by submit_req: thrd->req_running = 1
   because: idx = 1 - thrd->lstenq = 1
18.pl330_update(desc3 OK NOT desc4): thrd->req[1].desc = NULL
   desc4 to req_done list
   because: idx = active = thrd->req_running = 1
19._start(desc4) by pl330_update: thrd->req_running = 0
   because:
   idx = 1 - thrd->lstenq = 1, but thrd->req[1].desc == NULL,
   so:
   idx = thrd->lstenq = 0
20.pl330_update(desc4 OK): thrd->req[0].desc = NULL, desc5 to req_done list
   because: idx = active = thrd->req_running = 0
21.pl330_update(desc4 OK):
   1) before commit dfac17(set req_running -1 in pl330_update/mark_free()):
      because: active = -1, abort
      result: desc0-desc5's callback are all called,
	      but step 10 and step 18 go wrong.
   2) before commit dfac17:
      idx = active = thrd->req_runnig = 0 -->
      descdone = thrd->req[0] = NULL -->
      list_add_tail(&descdone->rqd, &pl330->req_done); -->
      got NULL pointer!!!

Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-10 16:20:19 -08:00
Jiang Liu
90e9782061 resources: Move struct resource_list_entry from ACPI into resource core
Currently ACPI, PCI and pnp all implement the same resource list
management with different data structure. We need to transfer from
one data structure into another when passing resources from one
subsystem into another subsystem. So move struct resource_list_entry
from ACPI into resource core and rename it as resource_entry,
then it could be reused by different subystems and avoid the data
structure conversion.

Introduce dedicated header file resource_ext.h instead of embedding
it into ioport.h to avoid header file inclusion order issues.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05 15:09:25 +01:00
Ludovic Desroches
6d3a7d9e3a dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers
When using FIFO, we need to support differents data width in a single
transfer. For example, serial device which usually uses 1-byte data
width will use 4-bytes data width when using the FIFO. If the transfer
size is not aligned on 4-bytes then the end of the transfer will be
performed with 1-byte data-width. For that reason,
at_xdmac_prep_slave_sg() now builds linked list descriptors using view 2
instead of view 1 so each of them can update the DWIDTH field into the
Channel Configuration Register.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 23:12:29 -08:00
Ludovic Desroches
be83507482 dmaengine: at_xdmac: simplify channel configuration stuff
This patch simplifies the channel configuration register management.
Relying on a "software snapshot" of the configuration is not safe and
too complex.

Multiple dwidths will be introduced for slave transfers. In this case,
it becomes quite difficult to have an accurate snapshot of the channel
configuration register in the way it is done. Using the channel
configuration available in the lli descriptor simplifies this stuff.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 23:12:29 -08:00
Ludovic Desroches
734bb9a7b3 dmaengine: at_xdmac: introduce save_cc field
When suspending the device, read the channel configuration directly from
the register instead of relying on a software snapshot, it will be
safer.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 23:12:28 -08:00
Cyrille Pitchen
cbb85e6726 dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 23:12:28 -08:00
Nicholas Mc Guire
12385f458a ioat: fail self-test if wait_for_completion times out
wait_for_completion_timeout reaching timeout was being ignored,
fail the self-test if timeout condition occurs.

v2: fixup of coding style issues.

Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 22:54:22 -08:00
Andy Shevchenko
d8ded50f8b dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
Instead of using magic number in the code the patch provides
DW_DMA_MAX_NR_MASTERS constant.

While here, restrict the reading of data width array by amount of the actual
number of AHB masters.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 22:39:44 -08:00
Andy Shevchenko
ede23a5868 dmatest: move src_off, dst_off, len inside loop
The scope of those varsiables is in while-loop. This patch moves them there and
removes duplicate code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 18:17:21 -08:00
Andy Shevchenko
a835bb8550 dmatest: fix indentation
Simple fixes an indentation in few places across the code.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 18:15:28 -08:00