Commit Graph

10 Commits

Author SHA1 Message Date
Dong Aisheng
a2aa65a332 ARM: imx: enable pinctrl dummy states
Enable pinctrl dummy states for imx platforms without pinctrl
support.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-08 23:05:16 +08:00
Shawn Guo
e7fc6ae744 gpio/mxc: get rid of the uses of cpu_is_mx()
The patch removes all the uses of cpu_is_mx().  Instead, it utilizes
platform_device_id to distinguish the different gpio types, IMX1_GPIO
on i.mx1, IMX21_GPIO on i.mx21 and i.mx27, IMX31_GPIO on all other
i.mx SoCs.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-08 12:38:12 -06:00
Shawn Guo
b78d8e59a6 gpio/mxc: Change gpio-mxc into an upstanding gpio driver
The patch makes necessary changes on gpio-mxc as below to turn it
into an upstanding gpio driver.

 * Add a list to save all mx2 ports references, so that
   mx2_gpio_irq_handler can walk through all interrupt status
   registers

 * Use readl/writel to replace mach-specific accessors
   __raw_readl/__raw_writel

 * Change mxc_gpio_init into mxc_gpio_probe function

 * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to
   be public at all, and also make some other cleanup on
   plat-mxc/include/mach/gpio.h at the same time

And the patch then migrates mach-imx and mach-mx5 to the updated
driver by adding corresponding platform devices.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06 10:01:19 -06:00
Sascha Hauer
ff255feba1 ARM i.MX: iomux v1 initialization away from initcall
This saves us from soc level dispatching in generic files

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07 19:29:38 +01:00
Sascha Hauer
5ae30b477e ARM i.MX: Move gpio initialization to SoC specific files
This saves us from soc level dispatching in generic files

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07 19:29:37 +01:00
Uwe Kleine-König
3dac219615 ARM: imx: use .init_early to initialize cpu type and reset address
This used to be done in .map_io which is supposed to only setup the
memory mapping.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10 14:23:48 +01:00
Uwe Kleine-König
08ff97b521 ARM: imx: use MXxy_IO_P2V macros to setup static mappings
This makes less code rely on the virtual constants.

To further simplify code and reduce the needed boilerplate when
defining the static mappings a new helper macro is defined in
mach/hardware.h.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17 08:58:09 +01:00
Jason Wang
84659ab585 imx: move gpio init after to irq init
The commit 9a763bf "get rid of mxc_gpio_init" changed gpio_init
and irq_init sequence. Usually we will call set_irq_chained_handler
in gpio_init functions, this should be called after the irq_init
called, otherwise the chained irq can't get propoer irq_chip and this
irq will remain masked even we called set_irq_chained_handler.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 15:05:35 +02:00
Uwe Kleine-König
6851a408a9 ARM: imx: remove paragraphs with old address of the FSF
As the kernel contains a copy of the GPL anyhow just get rid of the address
specification instead of fixing it.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 09:00:23 +02:00
Uwe Kleine-König
074694956b ARM: imx: move mx1 support to mach-imx
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30 08:59:44 +02:00