Does what it says on the tin.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-9-lyude@redhat.com
This probably hasn't caused any problems up until now since it's
probably nearly impossible to encounter this in the wild, however if we
were to receive a connection status notification from the MST hub after
resume while we're in the middle of reprobing the link addresses for a
topology then there's a much larger chance that a port could have
changed from being an output port to input port (or vice versa). If we
forget to update this bit of information, we'll potentially ignore a
valid PDT change on a downstream port because we think it's an input
port.
So, make sure we read the input_port field in connection status
notifications in drm_dp_mst_handle_conn_stat() to prevent this from
happening once we've implemented suspend/resume reprobing.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-8-lyude@redhat.com
This is a complicated one. Essentially, there's currently a problem in the MST
core that hasn't really caused any issues that we're aware of (emphasis on "that
we're aware of"): locking.
When we go through and probe the link addresses and path resources in a
topology, we hold no locks when updating ports with said information. The
members I'm referring to in particular are:
- ldps
- ddps
- mcs
- pdt
- dpcd_rev
- num_sdp_streams
- num_sdp_stream_sinks
- available_pbn
- input
- connector
Now that we're handling UP requests asynchronously and will be using some of
the struct members mentioned above in atomic modesetting in the future for
features such as PBN validation, this is going to become a lot more important.
As well, the next few commits that prepare us for and introduce suspend/resume
reprobing will also need clear locking in order to prevent from additional
racing hilarities that we never could have hit in the past.
So, let's solve this issue by using &mgr->base.lock, the modesetting
lock which currently only protects &mgr->base.state. This works
perfectly because it allows us to avoid blocking connection_mutex
unnecessarily, and we can grab this in connector detection paths since
it's a ww mutex. We start by having drm_dp_mst_handle_up_req() hold this
when updating ports. For drm_dp_mst_handle_link_address_port() things
are a bit more complicated. As I've learned the hard way, we can grab
&mgr->lock.base for everything except for port->connector. See, our
normal driver probing paths end up generating this rather obvious
lockdep chain:
&drm->mode_config.mutex
-> crtc_ww_class_mutex/crtc_ww_class_acquire
-> &connector->mutex
However, sysfs grabs &drm->mode_config.mutex in order to protect itself
from connector state changing under it. Because this entails grabbing
kn->count, e.g. the lock that the kernel provides for protecting sysfs
contexts, we end up grabbing kn->count followed by
&drm->mode_config.mutex. This ends up creating an extremely rude chain:
&kn->count
-> &drm->mode_config.mutex
-> crtc_ww_class_mutex/crtc_ww_class_acquire
-> &connector->mutex
I mean, look at that thing! It's just evil!!! This gross thing ends up
making any calls to drm_connector_register()/drm_connector_unregister()
impossible when holding any kind of modesetting lock. This is annoying
because ideally, we always want to ensure that
drm_dp_mst_port->connector never changes when doing an atomic commit or
check that would affect the atomic topology state so that it can
reliably and easily be used from future DRM DP MST helpers to assist
with tasks such as scanning through the current VCPI allocations and
adding connectors which need to have their allocations updated in
response to a bandwidth change or the like.
Being able to hold &mgr->base.lock throughout the entire link probe
process would have been _great_, since we could prevent userspace from
ever seeing any states in-between individual port changes and as a
result likely end up with a much faster probe and more consistent
results from said probes. But without some rework of how we handle
connector probing in sysfs it's not at all currently possible. In the
future, maybe we can try using the sysfs locks to protect updates to
connector probing state and fix this mess.
So for now, to protect everything other than port->connector under
&mgr->base.lock and ensure that we still have the guarantee that atomic
check/commit contexts will never see port->connector change we use a
silly trick. See: port->connector only needs to change in order to
ensure that input ports (see the MST spec) never have a ghost connector
associated with them. But, there's nothing stopping us from simply
throwing the entire port out and creating a new one in order to maintain
that requirement while still keeping port->connector consistent across
the lifetime of the port in atomic check/commit contexts. For all
intended purposes this works fine, as we validate ports in any contexts
we care about before using them and as such will end up reporting the
connector as disconnected until it's port's destruction finalizes. So,
we just do that in cases where we detect port->input has transitioned
from true->false. We don't need to worry about the other direction,
since a port without a connector isn't visible to userspace and as such
doesn't need to be protected by &mgr->base.lock until we finish
registering a connector for it.
For updating members of drm_dp_mst_port other than port->connector, we
simply grab &mgr->base.lock in drm_dp_mst_link_probe_work() for already
registered ports, update said members and drop the lock before
potentially registering a connector and probing the link address of it's
children.
Finally, we modify drm_dp_mst_detect_port() to take a modesetting lock
acquisition context in order to acquire &mgr->base.lock under
&connection_mutex and convert all it's users over to using the
.detect_ctx probe hooks.
With that, we finally have well defined locking.
Changes since v4:
* Get rid of port->mutex, stop using connection_mutex and just use our own
modesetting lock - mgr->base.lock. Also, add a probe_lock that comes
before this patch.
* Just throw out ports that get changed from an output to an input, and
replace them with new ports. This lets us ensure that modesetting
contexts never see port->connector go from having a connector to being
NULL.
* Write an extremely detailed explanation of what problems this is
trying to fix, since there's a _lot_ of context here and I honestly
forgot some of it myself a couple times.
* Don't grab mgr->lock when reading port->mstb in
drm_dp_mst_handle_link_address_port(). It's not needed.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-7-lyude@redhat.com
Currently, MST lacks locking in a lot of places that really should have
some sort of locking. Hotplugging and link address code paths are some
of the offenders here, as there is actually nothing preventing us from
running a link address probe while at the same time handling a
connection status update request - something that's likely always been
possible but never seen in the wild because hotplugging has been broken
for ages now (with the exception of amdgpu, for reasons I don't think
are worth digging into very far).
Note: I'm going to start using the term "in-memory topology layout" here
to refer to drm_dp_mst_port->mstb and drm_dp_mst_branch->ports.
Locking in these places is a little tougher then it looks though.
Generally we protect anything having to do with the in-memory topology
layout under &mgr->lock. But this becomes nearly impossible to do from
the context of link address probes due to the fact that &mgr->lock is
usually grabbed under random various modesetting locks, meaning that
there's no way we can just invert the &mgr->lock order and keep it
locked throughout the whole process of updating the topology.
Luckily there are only two workers which can modify the in-memory
topology layout: drm_dp_mst_up_req_work() and
drm_dp_mst_link_probe_work(), meaning as long as we prevent these two
workers from traveling the topology layout in parallel with the intent
of updating it we don't need to worry about grabbing &mgr->lock in these
workers for reads. We only need to grab &mgr->lock in these workers for
writes, so that readers outside these two workers are still protected
from the topology layout changing beneath them.
So, add the new &mgr->probe_lock and use it in both
drm_dp_mst_link_probe_work() and drm_dp_mst_up_req_work(). Additionally,
add some more detailed explanations for how this locking is intended to
work to drm_dp_mst_port->mstb and drm_dp_mst_branch->ports.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-6-lyude@redhat.com
Once upon a time, hotplugging devices on MST branches actually worked in
DRM. Now, it only works in amdgpu (likely because of how it's hotplug
handlers are implemented). On both i915 and nouveau, hotplug
notifications from MST branches are noticed - but trying to respond to
them causes messaging timeouts and causes the whole topology state to go
out of sync with reality, usually resulting in the user needing to
replug the entire topology in hopes that it actually fixes things.
The reason for this is because the way we currently handle UP requests
in MST is completely bogus. drm_dp_mst_handle_up_req() is called from
drm_dp_mst_hpd_irq(), which is usually called from the driver's hotplug
handler. Because we handle sending the hotplug event from this function,
we actually cause the driver's hotplug handler (and in turn, all
sideband transactions) to block on
drm_device->mode_config.connection_mutex. This makes it impossible to
send any sideband messages from the driver's connector probing
functions, resulting in the aforementioned sideband message timeout.
There's even more problems with this beyond breaking hotplugging on MST
branch devices. It also makes it almost impossible to protect
drm_dp_mst_port struct members under a lock because we then have to
worry about dealing with all of the lock dependency issues that ensue.
So, let's finally actually fix this issue by handling the processing of
up requests asyncronously. This way we can send sideband messages from
most contexts without having to deal with getting blocked if we hold
connection_mutex. This also fixes MST branch device hotplugging on i915,
finally!
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-5-lyude@redhat.com
Since we're going to be implementing suspend/resume reprobing very soon,
we need to make sure we are extra careful to ensure that our locking
actually protects the topology state where we expect it to. Turns out
this isn't the case with drm_dp_port_setup_pdt() and
drm_dp_port_teardown_pdt(), both of which change port->mstb without
grabbing &mgr->lock.
Additionally, since most callers of these functions are just using it to
teardown the port's previous PDT and setup a new one we can simplify
things a bit and combine drm_dp_port_setup_pdt() and
drm_dp_port_teardown_pdt() into a single function:
drm_dp_port_set_pdt(). This function also handles actually ensuring that
we grab the correct locks when we need to modify port->mstb.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-4-lyude@redhat.com
This will allow us to add some locking for port->* members, in
particular the PDT and ->connector, which can't be done from
drm_dp_destroy_port() since we don't know what locks the caller might be
holding.
Note that we already do this in delayed_destroy_work (renamed from
destroy_connector_work in this patch) for ports, we're just making it so
mstbs are also destroyed in this worker.
Changes since v2:
* Clarify commit message
Changes since v4:
* Clarify commit message more
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-3-lyude@redhat.com
When reprobing an MST topology during resume, we have to account for the
fact that while we were suspended it's possible that mstbs may have been
removed from any ports in the topology. Since iterating downwards in the
topology requires that we hold &mgr->lock, destroying MSTBs from this
context would result in attempting to lock &mgr->lock a second time and
deadlocking.
So, fix this by first moving destruction of MSTBs into
destroy_connector_work, then rename destroy_connector_work and friends
to reflect that they now destroy both ports and mstbs.
Note that even though this means that MSTBs will still be accessible for
a short period of time between their removal from the topology and
delayed destruction, we are still protected against referencing a MSTB
with a refcount of 0 since we use kref_get_unless_zero() in most places.
Changes since v1:
* s/destroy_connector_list/destroy_port_list/
s/connector_destroy_lock/delayed_destroy_lock/
s/connector_destroy_work/delayed_destroy_work/
s/drm_dp_finish_destroy_branch_device/drm_dp_delayed_destroy_mstb/
s/drm_dp_finish_destroy_port/drm_dp_delayed_destroy_port/
- danvet
* Use two loops in drm_dp_delayed_destroy_work() - danvet
* Better explain why we need to do this - danvet
* Use cancel_work_sync() instead of flush_work() - flush_work() doesn't
account for work requeing
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-2-lyude@redhat.com
Add helper to check if a drm debug category is enabled. Convert drm core
to use it. No functional changes.
v2: Move unlikely() to drm_debug_enabled() (Eric)
v3: Keep unlikely() when combined with other conditions (Eric)
Cc: Eric Engestrom <eric@engestrom.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001140614.26909-1-jani.nikula@intel.com
Get rid of the drm_fixp_from_fraction() usage and just do the
straightforward calculation directly.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925141442.23236-3-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Make drm_dp_get_vc_payload() tolerate arbitrary DP_LINK_BW_*
values, just like drm_dp_bw_code_to_link_rate() does since commit
57a1b08937 ("drm: Make the bw/link rate calculations more forgiving").
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925141442.23236-2-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
It looks like one of the topology manager mutexes may have been renamed
during a rebase, but the destruction function wasn't updated with the
new name:
error: ‘struct drm_dp_mst_topology_mgr’ has no member named
‘delayed_destroy_lock’
Fixes: 50094b5dcd ("drm/dp_mst: Destroy topology_mgr mutexes")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925224617.24027-1-matthew.d.roper@intel.com
The names for these functions are rather confusing. drm_dp_add_port()
sounds like a function that would simply create a port and add it to a
topology, and do nothing more. Similarly, drm_dp_update_port() would be
assumed to be the function that should be used to update port
information after initial creation.
While those assumptions are currently correct in how these functions are
used, a quick glance at drm_dp_add_port() reveals that drm_dp_add_port()
can also update the information on a port, and seems explicitly designed
to do so. This can be explained pretty simply by the fact that there's
more situations that would involve updating the port information based
on a link address response as opposed to a connection status
notification than the driver's initial topology probe. Case in point:
reprobing link addresses after suspend/resume.
Since we're about to start using drm_dp_add_port() differently for
suspend/resume reprobing, let's rename both functions to clarify what
they actually do.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-18-lyude@redhat.com
Turns out we've been forgetting for a while now to actually destroy any
of the mutexes that we create in drm_dp_mst_topology_mgr. So, let's do
that.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-15-lyude@redhat.com
Declare local pointer to the drm_dp_link_address_ack_reply struct
instead of constantly dereferencing it through the union in
txmsg->reply. Then, invert the order of conditionals so we don't have to
do the bulk of the work inside them, and can wrap lines even less. Then
finally, rearrange variable declarations a bit.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-16-lyude@redhat.com
* Remove the big ugly have_eomt conditional
* Store &mgr->down_rep_recv.initial_hdr in a var to make line wrapping
easier
* Remove duplicate memset() calls
* Actually wrap lines
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-14-lyude@redhat.com
There's a couple of changes here, so to summarize:
* Remove the big ugly mgr->up_req_recv.have_eomt conditional to save on
indenting
* Store &mgr->up_req_recv.initial_hdr in a variable so we don't keep
going over 80 character long lines
* De-duplicate code for calling drm_dp_send_up_ack_reply() and getting
the MSTB via it's GUID
* Remove all of the duplicate calls to memset() and just use a goto
instead
* Actually do line wrapping
* Remove the unnecessary if (mstb) check before calling
drm_dp_mst_topology_put_mstb() - we are guaranteed to always have
mstb != NULL at that point in the function
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-13-lyude@redhat.com
And it's helper, we'll be using this in just a moment.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-12-lyude@redhat.com
Which reduces indentation and makes this function more legible.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-11-lyude@redhat.com
Use more pointers so we don't have to write out
txmsg->reply.u.path_resources each time. Also, fix line wrapping +
rearrange local variables.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-10-lyude@redhat.com
Unfortunately the DP MST helpers do not have much in the way of
debugging utilities. So, let's add some!
This adds basic debugging output for down sideband requests that we send
from the driver, so that we can actually discern what's happening when
sideband requests timeout.
Since there wasn't really a good way of testing that any of this worked,
I ended up writing simple selftests that lightly test sideband message
encoding and decoding as well. Enjoy!
Changes since v1:
* Clean up DO_TEST() and sideband_msg_req_encode_decode() - danvet
* Get rid of pr_fmt(), just define a prefix string instead and use
drm_printf()
* Check highest bit of VCPI in drm_dp_decode_sideband_req() - danvet
* Make the switch case order between drm_dp_decode_sideband_req() and
drm_dp_encode_sideband_req() the same - danvet
* Only check DRM_UT_DP - danvet
* Clean up sideband_msg_req_equal() from selftests a bit, and add
comments explaining why we can't just use memcmp - danvet
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-8-lyude@redhat.com
Noticed this while working on adding a drm_dp_decode_sideband_req().
DP_POWER_DOWN_PHY/DP_POWER_UP_PHY both use the same struct as
DP_ENUM_PATH_RESOURCES, so we can just combine their cases.
Changes since v2:
* Fix commit message
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903215702.16984-1-lyude@redhat.com
Yes, apparently we've been testing this for every single driver load for
quite a long time now. At least that means our PBN calculation is solid!
Anyway, introduce self tests for MST and move this into there.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-5-lyude@redhat.com
This seems to be some leftover detritus from before the port/mstb kref
cleanup and doesn't do anything anymore, so get rid of it.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-3-lyude@redhat.com
Makes things easier to read.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-2-lyude@redhat.com
Fixes the following warnings:
../drivers/gpu/drm/drm_dp_mst_topology.c:1593: warning: Excess function parameter 'drm_connector' description in 'drm_dp_mst_connector_late_register'
../drivers/gpu/drm/drm_dp_mst_topology.c:1613: warning: Excess function parameter 'drm_connector' description in 'drm_dp_mst_connector_early_unregister'
../drivers/gpu/drm/drm_dp_mst_topology.c:1594: warning: Function parameter or member 'connector' not described in 'drm_dp_mst_connector_late_register'
../drivers/gpu/drm/drm_dp_mst_topology.c:1614: warning: Function parameter or member 'connector' not described in 'drm_dp_mst_connector_early_unregister'
Fixes: 562836a269 ("drm/dp_mst: Enable registration of AUX devices for MST ports")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726142057.224121-1-sean@poorly.run
All available downstream ports - physical and logical - are exposed for
each MST device. They are listed in /dev/, following the same naming
scheme as SST devices by appending an incremental ID.
Although all downstream ports are exposed, only some will work as
expected. Consider the following topology:
+---------+
| ASIC |
+---------+
Conn-0|
|
+----v----+
+----| MST HUB |----+
| +---------+ |
| |
|Port-1 Port-2|
+-----v-----+ +-----v-----+
| MST | | SST |
| Display | | Display |
+-----------+ +-----------+
|Port-1
x
MST Path | MST Device
----------+----------------------------------
sst:0 | MST Hub
mst:0-1 | MST Display
mst:0-1-1 | MST Display's disconnected DP out
mst:0-1-8 | MST Display's internal sink
mst:0-2 | SST Display
On certain MST displays, the upstream physical port will ACK DPCD reads.
However, reads on the local logical port to the internal sink will
*NAK*. i.e. reading mst:0-1 ACKs, but mst:0-1-8 NAKs.
There may also be duplicates. Some displays will return the same GUID
when reading DPCD from both mst:0-1 and mst:0-1-8.
There are some device-dependent behavior as well. The MST hub used
during testing will actually *ACK* read requests on a disconnected
physical port, whereas the MST displays will NAK.
In light of these discrepancies, it's simpler to expose all downstream
ports - both physical and logical - and let the user decide what to use.
v3 changes:
* Change WARN_ON_ONCE -> DRM_ERROR on dpcd read errors
* Docstring and cosmetic fixes
v2 changes:
Moved remote aux device (un)registration to new mst connector late
register and early unregister helpers. Drivers should call these from
their own mst connector function hooks.
This is to solve an issue during driver unload, where mst connector
devices are unregistered before the remote aux devices are. In a setup
where aux devices are created as children of connector devices, the aux
device would be removed too early, and uncleanly. Doing so in
early_unregister solves this issue, as that is called before connector
unregistration.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-3-sunpeng.li@amd.com
Current driver sets the tile property only for DP MST connectors.
However there are some tiled displays where each SST connector
carries a single tile. So we need to attach this property object
for every connector and set it for every connector (DP SST and MST).
Plus since the tile information is obtained as a result of EDID
parsing, the best place to update tile property is where we update
edid property.
Also now we dont need to explicitly set this now for MST connectors.
This has been tested with xrandr --props and modetest and verified
that TILE property is exposed correctly.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313021722.10068-1-manasi.d.navare@intel.com
Looks like when making the final revision of:
commit 022debad06 ("drm/atomic: Add drm_atomic_state->duplicated")
I forgot to remove some of the comments that I had added to
drm_dp_atomic_find_vcpi_slots() and drm_dp_atomic_release_vcpi_slots()
that were no longer valid due to us having removed the state->duplicated
checks from each function. This also introduced an error while building
the docs with sphinx:
./drivers/gpu/drm/drm_dp_mst_topology.c:3100: WARNING: Inline literal
start-string without end-string.
So, fix that by just removing the kerneldoc comments.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 022debad06 ("drm/atomic: Add drm_atomic_state->duplicated")
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-5-lyude@redhat.com
Since
commit 39b50c6038 ("drm/atomic_helper: Stop modesets on unregistered
connectors harder")
We've been failing atomic checks if they try to enable new displays on
unregistered connectors. This is fine except for the one situation that
breaks atomic assumptions: suspend/resume. If a connector is
unregistered before we attempt to restore the atomic state, something we
end up failing the atomic check that happens when trying to restore the
state during resume.
Normally this would be OK: we try our best to make sure that the atomic
state pre-suspend can be restored post-suspend, but failures at that
point usually don't cause problems. That is of course, until we
introduced the new atomic MST VCPI helpers:
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:65:pipe B] active changed
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:123:DP-5]
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:123:DP-5]
[drm:drm_atomic_get_private_obj_state [drm]] Added new private object 0000000025844636 state 000000009fd2899a to 000000003a13d7b8
WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
Modules linked in: fuse vfat fat snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic joydev iTCO_wdt i915(O) wmi_bmof intel_rapl btusb btrtl x86_pkg_temp_thermal btbcm btintel coretemp i2c_algo_bit drm_kms_helper(O) crc32_pclmul snd_hda_intel syscopyarea sysfillrect snd_hda_codec sysimgblt snd_hda_core bluetooth fb_sys_fops snd_pcm pcspkr drm(O) psmouse snd_timer mei_me ecdh_generic i2c_i801 mei i2c_core ucsi_acpi typec_ucsi typec wmi thinkpad_acpi ledtrig_audio snd soundcore tpm_tis rfkill tpm_tis_core video tpm acpi_pad pcc_cpufreq uas usb_storage crc32c_intel nvme serio_raw xhci_pci nvme_core xhci_hcd
CPU: 6 PID: 1070 Comm: gnome-shell Tainted: G W O 5.0.0-rc2Lyude-Test+ #1
Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018
RIP: 0010:drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
Code: 00 4c 39 6d f0 74 49 48 8d 7b 10 48 89 f9 48 c1 e9 03 42 80 3c 21 00 0f 85 d2 00 00 00 48 8b 6b 10 48 8d 5d f0 49 39 ee 75 c5 <0f> 0b 48 c7 c7 c0 78 b3 a0 48 89 c2 4c 89 ee e8 03 6c aa ff b8 ea
RSP: 0018:ffff88841235f268 EFLAGS: 00010246
RAX: ffff88841bf12ab0 RBX: ffff88841bf12aa8 RCX: 1ffff110837e2557
RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffffed108246bde0
RBP: ffff88841bf12ab8 R08: ffffed1083db3c93 R09: ffffed1083db3c92
R10: ffffed1083db3c92 R11: ffff88841ed9e497 R12: ffff888419555d80
R13: ffff8883bc499100 R14: ffff88841bf12ab8 R15: 0000000000000000
FS: 00007f16fbd4cd00(0000) GS:ffff88841ed80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1687c9f000 CR3: 00000003ba3cc003 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
drm_atomic_helper_check_modeset+0xf21/0x2f50 [drm_kms_helper]
? drm_atomic_helper_commit_modeset_enables+0xa90/0xa90 [drm_kms_helper]
? __printk_safe_exit+0x10/0x10
? save_stack+0x8c/0xb0
? vprintk_func+0x96/0x1bf
? __printk_safe_exit+0x10/0x10
intel_atomic_check+0x234/0x4750 [i915]
? printk+0x9f/0xc5
? kmsg_dump_rewind_nolock+0xd9/0xd9
? _raw_spin_lock_irqsave+0xa4/0x140
? drm_atomic_check_only+0xb1/0x28b0 [drm]
? drm_dbg+0x186/0x1b0 [drm]
? drm_dev_dbg+0x200/0x200 [drm]
? intel_link_compute_m_n+0xb0/0xb0 [i915]
? drm_mode_put_tile_group+0x20/0x20 [drm]
? skl_plane_format_mod_supported+0x17f/0x1b0 [i915]
? drm_plane_check_pixel_format+0x14a/0x310 [drm]
drm_atomic_check_only+0x13c4/0x28b0 [drm]
? drm_state_info+0x220/0x220 [drm]
? drm_atomic_helper_disable_plane+0x1d0/0x1d0 [drm_kms_helper]
? pick_single_encoder_for_connector+0xe0/0xe0 [drm_kms_helper]
? kasan_unpoison_shadow+0x35/0x40
drm_atomic_commit+0x3b/0x100 [drm]
drm_atomic_helper_set_config+0xd5/0x100 [drm_kms_helper]
drm_mode_setcrtc+0x636/0x1660 [drm]
? vprintk_func+0x96/0x1bf
? drm_dev_dbg+0x200/0x200 [drm]
? drm_mode_getcrtc+0x790/0x790 [drm]
? printk+0x9f/0xc5
? mutex_unlock+0x1d/0x40
? drm_mode_addfb2+0x2e9/0x3a0 [drm]
? rcu_sync_dtor+0x2e0/0x2e0
? drm_dbg+0x186/0x1b0 [drm]
? set_page_dirty+0x271/0x4d0
drm_ioctl_kernel+0x203/0x290 [drm]
? drm_mode_getcrtc+0x790/0x790 [drm]
? drm_setversion+0x7f0/0x7f0 [drm]
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x34/0x70
drm_ioctl+0x445/0x950 [drm]
? drm_mode_getcrtc+0x790/0x790 [drm]
? drm_getunique+0x220/0x220 [drm]
? expand_files.part.10+0x920/0x920
do_vfs_ioctl+0x1a1/0x13d0
? ioctl_preallocate+0x2b0/0x2b0
? __fget_light+0x2d6/0x390
? schedule+0xd7/0x2e0
? fget_raw+0x10/0x10
? apic_timer_interrupt+0xa/0x20
? apic_timer_interrupt+0xa/0x20
? rcu_cleanup_dead_rnp+0x2c0/0x2c0
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x6f/0xb0
do_syscall_64+0x136/0x440
? syscall_return_slowpath+0x2d0/0x2d0
? do_page_fault+0x89/0x330
? __do_page_fault+0x9c0/0x9c0
? prepare_exit_to_usermode+0x188/0x200
? perf_trace_sys_enter+0x1090/0x1090
? __x64_sys_sigaltstack+0x280/0x280
? __put_user_4+0x1c/0x30
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f16ff89a09b
Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff001232b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fff001232f0 RCX: 00007f16ff89a09b
RDX: 00007fff001232f0 RSI: 00000000c06864a2 RDI: 000000000000000b
RBP: 00007fff001232f0 R08: 0000000000000000 R09: 000055a79d484460
R10: 000055a79d44e770 R11: 0000000000000246 R12: 00000000c06864a2
R13: 000000000000000b R14: 0000000000000000 R15: 000055a79d44e770
WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
---[ end trace d536c05c13c83be2 ]---
[drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for [MST PORT:00000000f9e2b143] found in mst state 000000009fd2899a
This appears to be happening because we destroy the VCPI allocations
when disabling all connected displays while suspending, and those VCPI
allocations don't get restored on resume due to failing to restore the
atomic state.
So, fix this by introducing the suspending option to
drm_atomic_helper_duplicate_state() and use that to indicate in the
atomic state that it's being used for suspending or resuming the system,
and thus needs to be fixed up by the driver. We can then use the new
state->duplicated hook to tell update_connector_routing() in
drm_atomic_check_modeset() to allow for modesets on unregistered
connectors, which allows us to restore atomic states that contain MST
topologies that were removed after the state was duplicated and thus:
mostly fixing suspend and resume. This just leaves some issues that were
introduced with nouveau, that will be addressed next.
Changes since v3:
* Remove ->duplicated hunks that I left in the VCPI helpers by accident.
These don't need to be here, that was the supposed to be the purpose
of the last revision
Changes since v2:
* Remove the changes in this patch to the VCPI helpers, they aren't
needed anymore
Changes since v1:
* Rename suspend_or_resume to duplicated
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: eceae14724 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-4-lyude@redhat.com
Since we now have an easy way of refcounting drm_dp_mst_port structs and
safely accessing their contents, there isn't any good reason to keep
validating ports here. It doesn't prevent us from performing modesets on
branch devices that have been removed either, and we already disallow
enabling new displays on unregistered connectors in
update_connector_routing() in drm_atomic_check_modeset(). All it does is
cause us to have to make weird special exceptions in our atomic
modesetting code. So, get rid of it entirely.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: eceae14724 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-3-lyude@redhat.com
Decode the NAK reply fields to make it easier to parse the logs.
v2: s/STR/DP_STR/ to avoid conflict with some header stuff (0day)
Use drm_dp_mst_req_type_str() more (DK)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122200301.18633-2-ville.syrjala@linux.intel.com
Make the code a bit easier to read by providing symbolic names
for the reply_type (ACK vs. NAK). Also clean up some brace stuff
while at it.
v2: s/DP_REPLY/DP_SIDEBAND_REPLY/ (DK)
Fix some checkpatch issues
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122200301.18633-1-ville.syrjala@linux.intel.com
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
It occurred to me that we never actually check this! So let's start
doing that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-20-lyude@redhat.com
There has been a TODO waiting for quite a long time in
drm_dp_mst_topology.c:
/* We cannot rely on port->vcpi.num_slots to update
* topology_state->avail_slots as the port may not exist if the parent
* branch device was unplugged. This should be fixed by tracking
* per-port slot allocation in drm_dp_mst_topology_state instead of
* depending on the caller to tell us how many slots to release.
*/
That's not the only reason we should fix this: forcing the driver to
track the VCPI allocations throughout a state's atomic check is
error prone, because it means that extra care has to be taken with the
order that drm_dp_atomic_find_vcpi_slots() and
drm_dp_atomic_release_vcpi_slots() are called in in order to ensure
idempotency. Currently the only driver actually using these helpers,
i915, doesn't even do this correctly: multiple ->best_encoder() checks
with i915's current implementation would not be idempotent and would
over-allocate VCPI slots, something I learned trying to implement
fallback retraining in MST.
So: simplify this whole mess, and teach drm_dp_atomic_find_vcpi_slots()
and drm_dp_atomic_release_vcpi_slots() to track the VCPI allocations for
each port. This allows us to ensure idempotency without having to rely
on the driver as much. Additionally: the driver doesn't need to do any
kind of VCPI slot tracking anymore if it doesn't need it for it's own
internal state.
Additionally; this adds a new drm_dp_mst_atomic_check() helper which
must be used by atomic drivers to perform validity checks for the new
VCPI allocations incurred by a state.
Also: update the documentation and make it more obvious that these
/must/ be called by /all/ atomic drivers supporting MST.
Changes since v9:
* Add some missing changes that were requested by danvet that I forgot
about after I redid all of the kref stuff:
* Remove unnecessary state changes in intel_dp_mst_atomic_check
* Cleanup atomic check logic for VCPI allocations - all we need to check in
compute_config is whether or not this state disables a CRTC, then free
VCPI based off that
Changes since v8:
* Fix compile errors, whoops!
Changes since v7:
- Don't check for mixed stale/valid VCPI allocations, just rely on
connector registration to stop such erroneous modesets
Changes since v6:
- Keep a kref to all of the ports we have allocations on. This required
a good bit of changing to when we call drm_dp_find_vcpi_slots(),
mainly that we need to ensure that we only redo VCPI allocations on
actual mode or CRTC changes, not crtc_state->active changes.
Additionally, we no longer take the registration of the DRM connector
for each port into account because so long as we have a kref to the
port in the new or previous atomic state, the connector will stay
registered.
- Use the small changes to drm_dp_put_port() to add even more error
checking to make misusage of the helpers more obvious. I added this
after having to chase down various use-after-free conditions that
started popping up from the new helpers so no one else has to
troubleshoot that.
- Move some accidental DRM_DEBUG_KMS() calls to DRM_DEBUG_ATOMIC()
- Update documentation again, note that find/release() should both not be
called on the same port in a single atomic check phase (but multiple
calls to one or the other is OK)
Changes since v4:
- Don't skip the atomic checks for VCPI allocations if no new VCPI
allocations happen in a state. This makes the next change I'm about
to list here a lot easier to implement.
- Don't ignore VCPI allocations on destroyed ports, instead ensure that
when ports are destroyed and still have VCPI allocations in the
topology state, the only state changes allowed are releasing said
ports' VCPI. This prevents a state with a mix of VCPI allocations
from destroyed ports, and allocations from valid ports.
Changes since v3:
- Don't release VCPI allocations in the topology state immediately in
drm_dp_atomic_release_vcpi_slots(), instead mark them as 0 and skip
over them in drm_dp_mst_duplicate_state(). This makes it so
drm_dp_atomic_release_vcpi_slots() is still idempotent while also
throwing warnings if the driver messes up it's book keeping and tries
to release VCPI slots on a port that doesn't have any pre-existing
VCPI allocation - danvet
- Change mst_state/state in some debugging messages to "mst state"
Changes since v2:
- Use kmemdup() for duplicating MST state - danvet
- Move port validation out of duplicate state callback - danvet
- Handle looping through MST topology states in
drm_dp_mst_atomic_check() so the driver doesn't have to do it
- Fix documentation in drm_dp_atomic_find_vcpi_slots()
- Move the atomic check for each individual topology state into it's
own function, reduces indenting
- Don't consider "stale" MST ports when calculating the bandwidth
requirements. This is needed because originally we relied on the
state duplication functions to prune any stale ports from the new
state, which would prevent us from incorrectly considering their
bandwidth requirements alongside legitimate new payloads.
- Add function references in drm_dp_atomic_release_vcpi_slots() - danvet
- Annotate atomic VCPI and atomic check functions with __must_check
- danvet
Changes since v1:
- Don't use the now-removed ->atomic_check() for private objects hook,
just give drivers a function to call themselves
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-19-lyude@redhat.com
Changes since v6:
- Move EXPORT_SYMBOL() for drm_dp_mst_topology_state_funcs to this
commit
- Document __drm_dp_mst_state_iter_get() and note that it shouldn't be
called directly
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-18-lyude@redhat.com
Up until now, freeing payloads on remote MST hubs that just had ports
removed has almost never worked because we've been relying on port
validation in order to stop us from accessing ports that have already
been freed from memory, but ports which need their payloads released due
to being removed will never be a valid part of the topology after
they've been removed.
Since we've introduced malloc refs, we can replace all of the validation
logic in payload helpers which are used for deallocation with some
well-placed malloc krefs. This ensures that regardless of whether or not
the ports are still valid and in the topology, any port which has an
allocated payload will remain allocated in memory until it's payloads
have been removed - finally allowing us to actually release said
payloads correctly.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-10-lyude@redhat.com
This has never actually worked, and isn't needed anyway: the driver's
always going to try to deallocate VCPI when it tears down the display
that the VCPI belongs to.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-9-lyude@redhat.com
While this isn't a complete fix, this will improve the reliability of
drm_dp_get_last_connected_port_and_mstb() pretty significantly during
hotplug events, since there's a chance that the in-memory topology tree
may not be fully updated when drm_dp_get_last_connected_port_and_mstb()
is called and thus might end up causing our search to fail on an mstb
whose topology refcount has reached 0, but has not yet been removed from
it's parent.
Ideally, we should further fix this problem by ensuring that we deal
with the potential for racing with a hotplug event, which would look
like this:
* drm_dp_payload_send_msg() retrieves the last living relative of mstb
with drm_dp_get_last_connected_port_and_mstb()
* drm_dp_payload_send_msg() starts building payload message
At the same time, mstb gets unplugged from the topology and is no
longer the actual last living relative of the original mstb
* drm_dp_payload_send_msg() tries sending the payload message, hub times
out
* Hub timed out, we give up and run away-resulting in the payload being
leaked
This could be fixed by restarting the
drm_dp_get_last_connected_port_and_mstb() search whenever we get a
timeout, sending the payload to the new mstb, then repeating until
either the entire topology is removed from the system or
drm_dp_get_last_connected_port_and_mstb() fails. But since the above
race condition is not terribly likely, we'll address that in a later
patch series once we've improved the recovery handling for VCPI
allocations in the rest of the DP MST helpers.
Changes since v1:
* Convert kerneldoc for drm_dp_get_last_connected_port_and_mstb to
normal comment - danvet
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-8-lyude@redhat.com
The current way of handling refcounting in the DP MST helpers is really
confusing and probably just plain wrong because it's been hacked up many
times over the years without anyone actually going over the code and
seeing if things could be simplified.
To the best of my understanding, the current scheme works like this:
drm_dp_mst_port and drm_dp_mst_branch both have a single refcount. When
this refcount hits 0 for either of the two, they're removed from the
topology state, but not immediately freed. Both ports and branch devices
will reinitialize their kref once it's hit 0 before actually destroying
themselves. The intended purpose behind this is so that we can avoid
problems like not being able to free a remote payload that might still
be active, due to us having removed all of the port/branch device
structures in memory, as per:
commit 91a25e4631 ("drm/dp/mst: deallocate payload on port destruction")
Which may have worked, but then it caused use-after-free errors. Being
new to MST at the time, I tried fixing it;
commit 263efde31f ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()")
But, that was broken: both drm_dp_mst_port and drm_dp_mst_branch structs
are validated in almost every DP MST helper function. Simply put, this
means we go through the topology and try to see if the given
drm_dp_mst_branch or drm_dp_mst_port is still attached to something
before trying to use it in order to avoid dereferencing freed memory
(something that has happened a LOT in the past with this library).
Because of this it doesn't actually matter whether or not we keep keep
the ports and branches around in memory as that's not enough, because
any function that validates the branches and ports passed to it will
still reject them anyway since they're no longer in the topology
structure. So, use-after-free errors were fixed but payload deallocation
was completely broken.
Two years later, AMD informed me about this issue and I attempted to
come up with a temporary fix, pending a long-overdue cleanup of this
library:
commit c54c7374ff ("drm/dp_mst: Skip validating ports during destruction, just ref")
But then that introduced use-after-free errors, so I quickly reverted
it:
commit 9765635b30 ("Revert "drm/dp_mst: Skip validating ports during destruction, just ref"")
And in the process, learned that there is just no simple fix for this:
the design is just broken. Unfortunately, the usage of these helpers are
quite broken as well. Some drivers like i915 have been smart enough to
avoid accessing any kind of information from MST port structures, but
others like nouveau have assumed, understandably so, that
drm_dp_mst_port structures are normal and can just be accessed at any
time without worrying about use-after-free errors.
After a lot of discussion, me and Daniel Vetter came up with a better
idea to replace all of this.
To summarize, since this is documented far more indepth in the
documentation this patch introduces, we make it so that drm_dp_mst_port
and drm_dp_mst_branch structures have two different classes of
refcounts: topology_kref, and malloc_kref. topology_kref corresponds to
the lifetime of the given drm_dp_mst_port or drm_dp_mst_branch in it's
given topology. Once it hits zero, any associated connectors are removed
and the branch or port can no longer be validated. malloc_kref
corresponds to the lifetime of the memory allocation for the actual
structure, and will always be non-zero so long as the topology_kref is
non-zero. This gives us a way to allow callers to hold onto port and
branch device structures past their topology lifetime, and dramatically
simplifies the lifetimes of both structures. This also finally fixes the
port deallocation problem, properly.
Additionally: since this now means that we can keep ports and branch
devices allocated in memory for however long we need, we no longer need
a significant amount of the port validation that we currently do.
Additionally, there is one last scenario that this fixes, which couldn't
have been fixed properly beforehand:
- CPU1 unrefs port from topology (refcount 1->0)
- CPU2 refs port in topology(refcount 0->1)
Since we now can guarantee memory safety for ports and branches
as-needed, we also can make our main reference counting functions fix
this problem by using kref_get_unless_zero() internally so that topology
refcounts can only ever reach 0 once.
Changes since v4:
* Change the kernel-figure summary for dp-mst/topology-figure-1.dot a
bit - danvet
* Remove figure numbers - danvet
Changes since v3:
* Remove rebase detritus - danvet
* Split out purely style changes into separate patches - hwentlan
Changes since v2:
* Fix commit message - checkpatch
* s/)-1/) - 1/g - checkpatch
Changes since v1:
* Remove forward declarations - danvet
* Move "Branch device and port refcounting" section from documentation
into kernel-doc comments - danvet
* Export internal topology lifetime functions into their own section in
the kernel-docs - danvet
* s/@/&/g for struct references in kernel-docs - danvet
* Drop the "when they are no longer being used" bits from the kernel
docs - danvet
* Modify diagrams to show how the DRM driver interacts with the topology
and payloads - danvet
* Make suggested documentation changes for
drm_dp_mst_topology_get_mstb() and drm_dp_mst_topology_get_port() -
danvet
* Better explain the relationship between malloc refs and topology krefs
in the documentation for drm_dp_mst_topology_get_port() and
drm_dp_mst_topology_get_mstb() - danvet
* Fix "See also" in drm_dp_mst_topology_get_mstb() - danvet
* Rename drm_dp_mst_topology_get_(port|mstb)() ->
drm_dp_mst_topology_try_get_(port|mstb)() and
drm_dp_mst_topology_ref_(port|mstb)() ->
drm_dp_mst_topology_get_(port|mstb)() - danvet
* s/should/must in docs - danvet
* WARN_ON(refcount == 0) in topology_get_(mstb|port) - danvet
* Move kdocs for mstb/port structs inline - danvet
* Split drm_dp_get_last_connected_port_and_mstb() changes into their own
commit - danvet
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-7-lyude@redhat.com
s/drm_dp_get_validated_port_ref/drm_dp_mst_topology_get_port_validated/
s/drm_dp_put_port/drm_dp_mst_topology_put_port/
s/drm_dp_get_validated_mstb_ref/drm_dp_mst_topology_get_mstb_validated/
s/drm_dp_put_mst_branch_device/drm_dp_mst_topology_put_mstb/
This is a much more consistent naming scheme, and will make even more
sense once we redesign how the current refcounting scheme here works.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-6-lyude@redhat.com
Split some stuff across multiple lines
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-5-lyude@redhat.com
Fix some indenting, split some stuff across multiple lines.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-4-lyude@redhat.com
Split some stuff across multiple lines, remove some unnecessary braces
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-3-lyude@redhat.com
