The FSL_SOC option is bool, and hence this code is either
present or absent. It will never be modular, so using
module_init as an alias for __initcall is rather misleading.
Fix this up now, so that we can relocate module_init from
init.h into module.h in the future. If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.
Note that direct use of __initcall is discouraged, vs. one
of the priority categorized subgroups. As __initcall gets
mapped onto device_initcall, our use of subsys_initcall (which
makes sense for bus code) will thus change this registration
from level 6-device to level 4-subsys (i.e. slightly earlier).
However no observable impact of that small difference has
been observed during testing, or is expected.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott Wood <scottwood@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The suspend.o is built for SUSPEND -- which is bool, and hence
this code is either present or absent. It will never be modular,
so using module_init as an alias for __initcall can be somewhat
misleading.
Fix this up now, so that we can relocate module_init from
init.h into module.h in the future. If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.
Note that direct use of __initcall is discouraged, vs. one
of the priority categorized subgroups. As __initcall gets
mapped onto device_initcall, our use of device_initcall
directly in this change means that the runtime impact is
zero -- it will remain at level 6 in initcall ordering.
Cc: Scott Wood <scottwood@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Currently these two RTC devices are in core platform code
where it is not possible for them to be modular. It will
never be modular, so using module_init as an alias for
__initcall can be somewhat misleading.
Fix this up now, so that we can relocate module_init from
init.h into module.h in the future. If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.
Note that direct use of __initcall is discouraged, vs. one
of the priority categorized subgroups. As __initcall gets
mapped onto device_initcall, our use of device_initcall
directly in this change means that the runtime impact is
zero -- they will remain at level 6 in initcall ordering.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geoff Levand <geoff@infradead.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Although this init call checks for device tree properties before doing
anything, it should still only run on powernv machines.
Reviewed-by: Shreyas B Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We have code to choose between several options, eg. -mabi=elfv2 vs
-mcall-aixdesc, and -mcmodel=medium vs -mminimal-toc. But these are all
GCC specific, so use cc-option on all of them.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We added -mno-strict-align in commit f036b36819 (powerpc: Work around little
endian gcc bug) to fix gcc bug http://gcc.gnu.org/bugzilla/show_bug.cgi?id=57134
Clang doesn't understand it. We need to use a conditional because we can't use the
simpler call cc-option here.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
These options are not recognised on LLVM, so use call cc-option to check
for support.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The -mabi=altivec option is not recognised on LLVM, so use call cc-option
to check for support.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We see a large number of duplicate const errors in the user access
code when building with llvm/clang:
include/linux/pagemap.h:576:8: warning: duplicate 'const' declaration specifier
[-Wduplicate-decl-specifier]
ret = __get_user(c, uaddr);
The problem is we are doing const __typeof__(*(ptr)), which will hit the
warning if ptr is marked const.
Removing const does not seem to have any effect on GCC code generation.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds create/remove window ioctls to create and remove DMA windows.
sPAPR defines a Dynamic DMA windows capability which allows
para-virtualized guests to create additional DMA windows on a PCI bus.
The existing linux kernels use this new window to map the entire guest
memory and switch to the direct DMA operations saving time on map/unmap
requests which would normally happen in a big amounts.
This adds 2 ioctl handlers - VFIO_IOMMU_SPAPR_TCE_CREATE and
VFIO_IOMMU_SPAPR_TCE_REMOVE - to create and remove windows.
Up to 2 windows are supported now by the hardware and by this driver.
This changes VFIO_IOMMU_SPAPR_TCE_GET_INFO handler to return additional
information such as a number of supported windows and maximum number
levels of TCE tables.
DDW is added as a capability, not as a SPAPR TCE IOMMU v2 unique feature
as we still want to support v2 on platforms which cannot do DDW for
the sake of TCE acceleration in KVM (coming soon).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The existing implementation accounts the whole DMA window in
the locked_vm counter. This is going to be worse with multiple
containers and huge DMA windows. Also, real-time accounting would requite
additional tracking of accounted pages due to the page size difference -
IOMMU uses 4K pages and system uses 4K or 64K pages.
Another issue is that actual pages pinning/unpinning happens on every
DMA map/unmap request. This does not affect the performance much now as
we spend way too much time now on switching context between
guest/userspace/host but this will start to matter when we add in-kernel
DMA map/unmap acceleration.
This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU.
New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces
2 new ioctls to register/unregister DMA memory -
VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY -
which receive user space address and size of a memory region which
needs to be pinned/unpinned and counted in locked_vm.
New IOMMU splits physical pages pinning and TCE table update
into 2 different operations. It requires:
1) guest pages to be registered first
2) consequent map/unmap requests to work only with pre-registered memory.
For the default single window case this means that the entire guest
(instead of 2GB) needs to be pinned before using VFIO.
When a huge DMA window is added, no additional pinning will be
required, otherwise it would be guest RAM + 2GB.
The new memory registration ioctls are not supported by
VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration
will require memory to be preregistered in order to work.
The accounting is done per the user process.
This advertises v2 SPAPR TCE IOMMU and restricts what the userspace
can do with v1 or v2 IOMMUs.
In order to support memory pre-registration, we need a way to track
the use of every registered memory region and only allow unregistration
if a region is not in use anymore. So we need a way to tell from what
region the just cleared TCE was from.
This adds a userspace view of the TCE table into iommu_table struct.
It contains userspace address, one per TCE entry. The table is only
allocated when the ownership over an IOMMU group is taken which means
it is only used from outside of the powernv code (such as VFIO).
As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support
DDW API), this creates a default DMA window for IODA2 for consistency.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We are adding support for DMA memory pre-registration to be used in
conjunction with VFIO. The idea is that the userspace which is going to
run a guest may want to pre-register a user space memory region so
it all gets pinned once and never goes away. Having this done,
a hypervisor will not have to pin/unpin pages on every DMA map/unmap
request. This is going to help with multiple pinning of the same memory.
Another use of it is in-kernel real mode (mmu off) acceleration of
DMA requests where real time translation of guest physical to host
physical addresses is non-trivial and may fail as linux ptes may be
temporarily invalid. Also, having cached host physical addresses
(compared to just pinning at the start and then walking the page table
again on every H_PUT_TCE), we can be sure that the addresses which we put
into TCE table are the ones we already pinned.
This adds a list of memory regions to mm_context_t. Each region consists
of a header and a list of physical addresses. This adds API to:
1. register/unregister memory regions;
2. do final cleanup (which puts all pre-registered pages);
3. do userspace to physical address translation;
4. manage usage counters; multiple registration of the same memory
is allowed (once per container).
This implements 2 counters per registered memory region:
- @mapped: incremented on every DMA mapping; decremented on unmapping;
initialized to 1 when a region is just registered; once it becomes zero,
no more mappings allowe;
- @used: incremented on every "register" ioctl; decremented on
"unregister"; unregistration is allowed for DMA mapped regions unless
it is the very last reference. For the very last reference this checks
that the region is still mapped and returns -EBUSY so the userspace
gets to know that memory is still pinned and unregistration needs to
be retried; @used remains 1.
Host physical addresses are stored in vmalloc'ed array. In order to
access these in the real mode (mmu off), there is a real_vmalloc_addr()
helper. In-kernel acceleration patchset will move it from KVM to MMU code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Before the IOMMU user (VFIO) would take control over the IOMMU table
belonging to a specific IOMMU group. This approach did not allow sharing
tables between IOMMU groups attached to the same container.
This introduces a new IOMMU ownership flavour when the user can not
just control the existing IOMMU table but remove/create tables on demand.
If an IOMMU implements take/release_ownership() callbacks, this lets
the user have full control over the IOMMU group. When the ownership
is taken, the platform code removes all the windows so the caller must
create them.
Before returning the ownership back to the platform code, VFIO
unprograms and removes all the tables it created.
This changes IODA2's onwership handler to remove the existing table
rather than manipulating with the existing one. From now on,
iommu_take_ownership() and iommu_release_ownership() are only called
from the vfio_iommu_spapr_tce driver.
Old-style ownership is still supported allowing VFIO to run on older
P5IOC2 and IODA IO controllers.
No change in userspace-visible behaviour is expected. Since it recreates
TCE tables on each ownership change, related kernel traces will appear
more often.
This adds a pnv_pci_ioda2_setup_default_config() which is called
when PE is being configured at boot time and when the ownership is
passed from VFIO to the platform code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a way for the IOMMU user to know how much a new table will
use so it can be accounted in the locked_vm limit before allocation
happens.
This stores the allocated table size in pnv_pci_ioda2_get_table_size()
so the locked_vm counter can be updated correctly when a table is
being disposed.
This defines an iommu_table_group_ops callback to let VFIO know
how much memory will be locked if a table is created.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The existing code programmed TVT#0 with some address and then
immediately released that memory.
This makes use of pnv_pci_ioda2_unset_window() and
pnv_pci_ioda2_set_bypass() which do correct resource release and
TVT update.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This extends iommu_table_group_ops by a set of callbacks to support
dynamic DMA windows management.
create_table() creates a TCE table with specific parameters.
it receives iommu_table_group to know nodeid in order to allocate
TCE table memory closer to the PHB. The exact format of allocated
multi-level table might be also specific to the PHB model (not
the case now though).
This callback calculated the DMA window offset on a PCI bus from @num
and stores it in a just created table.
set_window() sets the window at specified TVT index + @num on PHB.
unset_window() unsets the window from specified TVT.
This adds a free() callback to iommu_table_ops to free the memory
(potentially a tree of tables) allocated for the TCE table.
create_table() and free() are supposed to be called once per
VFIO container and set_window()/unset_window() are supposed to be
called for every group in a container.
This adds IOMMU capabilities to iommu_table_group such as default
32bit window parameters and others. This makes use of new values in
vfio_iommu_spapr_tce. IODA1/P5IOC2 do not support DDW so they do not
advertise pagemasks to the userspace.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
TCE tables might get too big in case of 4K IOMMU pages and DDW enabled
on huge guests (hundreds of GB of RAM) so the kernel might be unable to
allocate contiguous chunk of physical memory to store the TCE table.
To address this, POWER8 CPU (actually, IODA2) supports multi-level
TCE tables, up to 5 levels which splits the table into a tree of
smaller subtables.
This adds multi-level TCE tables support to
pnv_pci_ioda2_table_alloc_pages() and pnv_pci_ioda2_table_free_pages()
helpers.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is a part of moving DMA window programming to an iommu_ops
callback. pnv_pci_ioda2_set_window() takes an iommu_table_group as
a first parameter (not pnv_ioda_pe) as it is going to be used as
a callback for VFIO DDW code.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is a part of moving TCE table allocation into an iommu_ops
callback to support multiple IOMMU groups per one VFIO container.
This moves the code which allocates the actual TCE tables to helpers:
pnv_pci_ioda2_table_alloc_pages() and pnv_pci_ioda2_table_free_pages().
These do not allocate/free the iommu_table struct.
This enforces window size to be a power of two.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This moves iommu_table creation to the beginning to make following changes
easier to review. This starts using table parameters from the iommu_table
struct.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment writing new TCE value to the IOMMU table fails with EBUSY
if there is a valid entry already. However PAPR specification allows
the guest to write new TCE value without clearing it first.
Another problem this patch is addressing is the use of pool locks for
external IOMMU users such as VFIO. The pool locks are to protect
DMA page allocator rather than entries and since the host kernel does
not control what pages are in use, there is no point in pool locks and
exchange()+put_page(oldtce) is sufficient to avoid possible races.
This adds an exchange() callback to iommu_table_ops which does the same
thing as set() plus it returns replaced TCE and DMA direction so
the caller can release the pages afterwards. The exchange() receives
a physical address unlike set() which receives linear mapping address;
and returns a physical address as the clear() does.
This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement
for a platform to have exchange() implemented in order to support VFIO.
This replaces iommu_tce_build() and iommu_clear_tce() with
a single iommu_tce_xchg().
This makes sure that TCE permission bits are not set in TCE passed to
IOMMU API as those are to be calculated by platform code from
DMA direction.
This moves SetPageDirty() to the IOMMU code to make it work for both
VFIO ioctl interface in in-kernel TCE acceleration (when it becomes
available later).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This replaces direct accesses to TCE table with a helper which
returns an TCE entry address. This does not make difference now but will
when multi-level TCE tables get introduces.
No change in behavior is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The iommu_table struct keeps a list of IOMMU groups it is used for.
At the moment there is just a single group attached but further
patches will add TCE table sharing. When sharing is enabled, TCE cache
in each PE needs to be invalidated so does the patch.
This does not change pnv_pci_ioda1_tce_invalidate() as there is no plan
to enable TCE table sharing on PHBs older than IODA2.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment the DMA setup code looks for the "ibm,opal-tce-kill"
property which contains the TCE kill register address. Writing to
this register invalidates TCE cache on IODA/IODA2 hub.
This moves the register address from iommu_table to pnv_pnb as this
register belongs to PHB and invalidates TCE cache for all tables of
all attached PEs.
This moves the property reading/remapping code to a helper which is
called when DMA is being configured for PE and which does DMA setup
for both IODA1 and IODA2.
This adds a new pnv_pci_ioda2_tce_invalidate_entire() helper which
invalidates cache for the entire table. It should be called after
every call to opal_pci_map_pe_dma_window(). It was not required before
because there was just a single TCE table and 64bit DMA was handled via
bypass window (which has no table so no cache was used) but this is going
to change with Dynamic DMA windows (DDW).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds missing locks in iommu_take_ownership()/
iommu_release_ownership().
This marks all pages busy in iommu_table::it_map in order to catch
errors if there is an attempt to use this table while ownership over it
is taken.
This only clears TCE content if there is no page marked busy in it_map.
Clearing must be done outside of the table locks as iommu_clear_tce()
called from iommu_clear_tces_and_put_pages() does this.
In order to use bitmap_empty(), the existing code clears bit#0 which
is set even in an empty table if it is bus-mapped at 0 as
iommu_init_table() reserves page#0 to prevent buggy drivers
from crashing when allocated page is bus-mapped at zero
(which is correct). This restores the bit in the case of failure
to bring the it_map to the state it was in when we called
iommu_take_ownership().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds tce_iommu_take_ownership() and tce_iommu_release_ownership
which call in a loop iommu_take_ownership()/iommu_release_ownership()
for every table on the group. As there is just one now, no change in
behaviour is expected.
At the moment the iommu_table struct has a set_bypass() which enables/
disables DMA bypass on IODA2 PHB. This is exposed to POWERPC IOMMU code
which calls this callback when external IOMMU users such as VFIO are
about to get over a PHB.
The set_bypass() callback is not really an iommu_table function but
IOMMU/PE function. This introduces a iommu_table_group_ops struct and
adds take_ownership()/release_ownership() callbacks to it which are
called when an external user takes/releases control over the IOMMU.
This replaces set_bypass() with ownership callbacks as it is not
necessarily just bypass enabling, it can be something else/more
so let's give it more generic name.
The callbacks is implemented for IODA2 only. Other platforms (P5IOC2,
IODA1) will use the old iommu_take_ownership/iommu_release_ownership API.
The following patches will replace iommu_take_ownership/
iommu_release_ownership calls in IODA2 with full IOMMU table release/
create.
As we here and touching bypass control, this removes
pnv_pci_ioda2_setup_bypass_pe() as it does not do much
more compared to pnv_pci_ioda2_set_bypass. This moves tce_bypass_base
initialization to pnv_pci_ioda2_setup_dma_pe.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
So far one TCE table could only be used by one IOMMU group. However
IODA2 hardware allows programming the same TCE table address to
multiple PE allowing sharing tables.
This replaces a single pointer to a group in a iommu_table struct
with a linked list of groups which provides the way of invalidating
TCE cache for every PE when an actual TCE table is updated. This adds
pnv_pci_link_table_and_group() and pnv_pci_unlink_table_and_group()
helpers to manage the list. However without VFIO, it is still going
to be a single IOMMU group per iommu_table.
This changes iommu_add_device() to add a device to a first group
from the group list of a table as it is only called from the platform
init code or PCI bus notifier and at these moments there is only
one group per table.
This does not change TCE invalidation code to loop through all
attached groups in order to simplify this patch and because
it is not really needed in most cases. IODA2 is fixed in a later
patch.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Modern IBM POWERPC systems support multiple (currently two) TCE tables
per IOMMU group (a.k.a. PE). This adds a iommu_table_group container
for TCE tables. Right now just one table is supported.
This defines iommu_table_group struct which stores pointers to
iommu_group and iommu_table(s). This replaces iommu_table with
iommu_table_group where iommu_table was used to identify a group:
- iommu_register_group();
- iommudata of generic iommu_group;
This removes @data from iommu_table as it_table_group provides
same access to pnv_ioda_pe.
For IODA, instead of embedding iommu_table, the new iommu_table_group
keeps pointers to those. The iommu_table structs are allocated
dynamically.
For P5IOC2, both iommu_table_group and iommu_table are embedded into
PE struct. As there is no EEH and SRIOV support for P5IOC2,
iommu_free_table() should not be called on iommu_table struct pointers
so we can keep it embedded in pnv_phb::p5ioc2.
For pSeries, this replaces multiple calls of kzalloc_node() with a new
iommu_pseries_alloc_group() helper and stores the table group struct
pointer into the pci_dn struct. For release, a iommu_table_free_group()
helper is added.
This moves iommu_table struct allocation from SR-IOV code to
the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and
pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized.
This change is here because those lines had to be changed anyway.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The pnv_pci_ioda_tce_invalidate() helper invalidates TCE cache. It is
supposed to be called on IODA1/2 and not called on p5ioc2. It receives
start and end host addresses of TCE table.
IODA2 actually needs PCI addresses to invalidate the cache. Those
can be calculated from host addresses but since we are going
to implement multi-level TCE tables, calculating PCI address from
a host address might get either tricky or ugly as TCE table remains flat
on PCI bus but not in RAM.
This moves pnv_pci_ioda_tce_invalidate() from generic pnv_tce_build/
pnt_tce_free and defines IODA1/2-specific callbacks which call generic
ones and do PHB-model-specific TCE cache invalidation. P5IOC2 keeps
using generic callbacks as before.
This changes pnv_pci_ioda2_tce_invalidate() to receives TCE index and
number of pages which are PCI addresses shifted by IOMMU page shift.
No change in behaviour is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a iommu_table_ops struct and puts pointer to it into
the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush
callbacks from ppc_md to the new struct where they really belong to.
This adds the requirement for @it_ops to be initialized before calling
iommu_init_table() to make sure that we do not leave any IOMMU table
with iommu_table_ops uninitialized. This is not a parameter of
iommu_init_table() though as there will be cases when iommu_init_table()
will not be called on TCE tables, for example - VFIO.
This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_"
redundant prefixes.
This removes tce_xxx_rm handlers from ppc_md but does not add
them to iommu_table_ops as this will be done later if we decide to
support TCE hypercalls in real mode. This removes _vm callbacks as
only virtual mode is supported by now so this also removes @rm parameter.
For pSeries, this always uses tce_buildmulti_pSeriesLP/
tce_buildmulti_pSeriesLP. This changes multi callback to fall back to
tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not
present. The reason for this is we still have to support "multitce=off"
boot parameter in disable_multitce() and we do not want to walk through
all IOMMU tables in the system and replace "multi" callbacks with single
ones.
For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2.
This makes the callbacks for them public. Later patches will extend
callbacks for IODA1/2.
No change in behaviour is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Normally a bitmap from the iommu_table is used to track what TCE entry
is in use. Since we are going to use iommu_table without its locks and
do xchg() instead, it becomes essential not to put bits which are not
implied in the direction flag as the old TCE value (more precisely -
the permission bits) will be used to decide whether to put the page or not.
This adds iommu_direction_to_tce_perm() (its counterpart is there already)
and uses it for powernv's pnv_tce_build().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This moves page pinning (get_user_pages_fast()/put_page()) code out of
the platform IOMMU code and puts it to VFIO IOMMU driver where it belongs
to as the platform code does not deal with page pinning.
This makes iommu_take_ownership()/iommu_release_ownership() deal with
the IOMMU table bitmap only.
This removes page unpinning from iommu_take_ownership() as the actual
TCE table might contain garbage and doing put_page() on it is undefined
behaviour.
Besides the last part, the rest of the patch is mechanical.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for the vfio related changes]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment iommu_free_table() only releases memory if
the table was initialized for the platform code use, i.e. it had
it_map initialized (which purpose is to track DMA memory space use).
With dynamic DMA windows, we will need to be able to release
iommu_table even if it was used for VFIO in which case it_map is NULL
so does the patch.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
So far an iommu_table lifetime was the same as PE. Dynamic DMA windows
will change this and iommu_free_table() will not always require
the group to be released.
This moves iommu_group_put() out of iommu_free_table().
This adds a iommu_pseries_free_table() helper which does
iommu_group_put() and iommu_free_table(). Later it will be
changed to receive a table_group and we will have to change less
lines then.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The existing code has 3 calls to iommu_register_group() and
all 3 branches actually cover all possible cases.
This replaces 3 calls with one and moves the registration earlier;
the latter will make more sense when we add TCE table sharing.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The set_iommu_table_base_and_group() name suggests that the function
sets table base and add a device to an IOMMU group.
The actual purpose for table base setting is to put some reference
into a device so later iommu_add_device() can get the IOMMU group
reference and the device to the group.
At the moment a group cannot be explicitly passed to iommu_add_device()
as we want it to work from the bus notifier, we can fix it later and
remove confusing calls of set_iommu_table_base().
This replaces set_iommu_table_base_and_group() with a couple of
set_iommu_table_base() + iommu_add_device() which makes reading the code
easier.
This adds few comments why set_iommu_table_base() and iommu_add_device()
are called where they are called.
For IODA1/2, this essentially removes iommu_add_device() call from
the pnv_pci_ioda_dma_dev_setup() as it will always fail at this particular
place:
- for physical PE, the device is already attached by iommu_add_device()
in pnv_pci_ioda_setup_dma_pe();
- for virtual PE, the sysfs entries are not ready to create all symlinks
so actual adding is happening in tce_iommu_bus_notifier.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This relies on the fact that a PCI device always has an IOMMU table
which may not be the case when we get dynamic DMA windows so
let's use more reliable check for IOMMU group here.
As we do not rely on the table presence here, remove the workaround
from pnv_pci_ioda2_set_bypass(); also remove the @add_to_iommu_group
parameter from pnv_ioda_setup_bus_dma().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pci_dma_burst_advice() was added by e24c2d963a ("[PATCH] PCI: DMA
bursting advice") but apparently never used. Remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michal Simek <monstr@monstr.eu> # microblaze
CC: David S. Miller <davem@davemloft.net>
In include/linux/pci.h, we already #include <asm/pci.h>, so we don't need
to include <asm/pci.h> directly.
Remove the unnecessary includes. All the files here already include
<linux/pci.h>.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au> # sh
Acked-by: Ralf Baechle <ralf@linux-mips.org>
This patch adds some in-code documentation to the DSCR related code to
make it more readable without having any functional change to it.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PACA_DSCR offset macro tracks dscr_default element in the paca
structure. Better change the name of this macro to match that of the
data element it tracks. Makes the code more readable.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The process context switch code no longer uses dscr_default variable
from the sysfs.c file. The variable became unused when we started
storing the CPU specific DSCR value in the PACA structure instead.
This patch just removes this extern declaration. It was originally
added by the following commit.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently DSCR (Data Stream Control Register) can be accessed with
mfspr or mtspr instructions inside a thread via two different SPR
numbers. One being the user accessible problem state SPR number 0x03
and the other being the privilege state SPR number 0x11. All access
through the privilege state SPR number get emulated through illegal
instruction exception. Any access through the problem state SPR number
raises one facility unavailable exception which sets the thread based
dscr_inherit bit and enables DSCR facility through FSCR register thus
allowing direct access to DSCR without going through this exception in
the future. We set the thread.dscr_inherit bit whether the access was
with mfspr or mtspr instruction which is neither correct nor does it
match the behaviour through the instruction emulation code path driven
from privilege state SPR number. User currently observes two different
kind of behaviour when accessing the DSCR through these two SPR numbers.
This problem can be observed through these two test cases by replacing
the privilege state SPR number with the problem state SPR number.
(1) http://ozlabs.org/~anton/junkcode/dscr_default_test.c
(2) http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c
This patch fixes the problem by making sure that the behaviour visible
to the user remains the same irrespective of which SPR number is being
used. Inside facility unavailable exception, we check whether it was
cuased by a mfspr or a mtspr isntrucction. In case of mfspr instruction,
just emulate the instruction. In case of mtspr instruction, set the
thread based dscr_inherit bit and also enable the facility through FSCR.
All user SPR based mfspr instruction will be emulated till one user SPR
based mtspr has been executed.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 28158cd "powerpc/eeh: Enhance pcibios_set_pcie_reset_state()"
introduced a fix for a problem where certain configurations could lead to
pci_reset_function() destroying the state of PCI devices other than the one
specified.
Unfortunately, the fix has a trivial bug - it calls pci_save_state() again,
when it should be calling pci_restore_state(). This corrects the problem.
Cc: Gavin Shan <gwshan@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Only two ioctls have to be modified; the address space id is
placed in the higher 16 bits of their slot id argument.
As of this patch, no architecture defines more than one
address space; x86 will be the first.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 100832abf0 ("usb: isp1760: Make HCD support
optional"), CONFIG_USB_ISP1760_HCD is automatically selected when
needed. Enabling that option in the defconfig is now a no-op, and no
longer enables ISP1760 HCD support.
Re-enable the ISP1760 driver in the defconfig by enabling
USB_ISP1760_HOST_ROLE instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Scott Wood <scottwood@freescale.com>
With the libfdt include fixups to use "" instead of <> in the
latest dtc import in commit 4760597 (scripts/dtc: Update to upstream
version 9d3649bd3be245c9), it is no longer necessary to add explicit
include paths to use libfdt. Remove these across the kernel.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: linuxppc-dev@lists.ozlabs.org
This change adds a char device to access the "PRD" (processor runtime
diagnostics) channel to OPAL firmware.
Includes contributions from Vaidyanathan Srinivasan, Neelesh Gupta &
Vishal Kulkarni.
Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The (upcoming) opal-prd driver needs to access the message notifier and
xscom code, so add EXPORT_SYMBOL_GPL macros for these.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
opal_ipmi_init and opal_flash_init are equivalent, except for the
compatbile string. Merge these two into a common opal_pdev_init
function.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The opal_{get,set}_param calls return internal error codes which need
to be translated in errnos in Linux.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This moves the current include file from cxl.h -> cxl-base.h. This current
include file is used only to pass information between the base driver that
needs to be built into the kernel and the cxl module.
This is to make way for a new include/misc/cxl.h which will
contain just the kernel API for other driver to use
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a hook into the powerpc pci code for pci_disable_device() calls. The
generic code already provides a weak pcibios_disable_device() symbol, so we
just need to provide our own in powerpc and it'll get picked up.
This is passed directly to the phb controller ops, provided one exists.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently pnv_pci_shutdown() calls the PHB shutdown code for all PHBs in the
system. It dereferences the private_data assuming it's a powernv PHB, which
won't be the case when we have different PHB in the systems (like when we add
vPHBs for CXL).
This moves the shutdown hook to the pci_controller_ops and fixes the call site
to use that instead.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add cxl context pointer to archdata. We'll want to create one of these for cxl
PCI devices. Put them here until we can get a pci_dev specific private data.
This location was suggested by benh.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add release_device() hook to phb ops so we can clean up for specific phbs.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Export pcibios_claim_one_bus, pcibios_scan_phb and pcibios_alloc_controller.
These will be used by the CXL driver.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This fixes calculating the key bits (KP and KS) in the SLB VSID for kernel
mappings.
I'm not CCing this to stable as there are no uses of this currently.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A ioport setting was needed when used the QE uart function on TWR-P1025.
Added a conditional definition to avoid missing this setting when the
QE-uart driver was bulit to a module.
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Signed-off-by: Li Pengbo <Pengbo.Li@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
We observe a "Zero PT_NOTE entries found" warning when vmcore_init()
is running on the dump-capture kernel. Actually the PT_NOTE segments
is not empty, but the entries generated by crash_save_cpu() are not
flushed to the memory before we reset these cores. So we should flush
the l1 cache as what we do in cpu hotplug. With this change, we can
also kill the mpc85xx_smp_flush_dcache_kexec() since that becomes
unnecessary.
Please note: this only fix the issue on e500 core, we still need to
implement the function to flush the l2 cache for the e500mc core.
Fortunately we already had proposing patch for this support [1].
Hope we can fix this issue for e500mc after that merged.
[1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2014-March/115830.html
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
This patch implements PAGE_EXEC capability on the 8xx.
All pages PP exec bits are set to 000, which means Execute for
Supervisor and no Execute for User.
Then we use the APG to say whether accesses are according to Page
rules, "all Supervisor" rules (Exec for all) and
"all User" rules (Exec for noone)
Therefore, we define 4 APG groups. msb is _PAGE_EXEC,
lsb is _PAGE_USER. MI_AP is initialised as follows:
GP0 (00) => Not User, no exec => 11 (all accesses performed as user)
GP1 (01) => User but no exec => 11 (all accesses performed as user)
GP2 (10) => Not User, exec => 01 (rights according to page definition)
GP3 (11) => User, exec => 00 (all accesses performed as supervisor)
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood: comments: s/exec/data/ on data side, and s/pages/pages'/]
Signed-off-by: Scott Wood <scottwood@freescale.com>
Use of APG for handling PAGE_USER.
All pages PP exec bits are set to either 000 or 011, which means
respectively RW for Supervisor and no access for User, or RO for
Supervisor and no access for user.
Then we use the APG to say whether accesses are according to
Page rules or "all Supervisor" rules (Access to all)
Therefore, we define 2 APG groups corresponding to _PAGE_USER.
Mx_AP are initialised as follows:
GP0 => No user => 01 (all accesses performed according
to page definition)
GP1 => User => 00 (all accesses performed as supervisor
according to page definition)
This removes the special 8xx handling in pte_update()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
All kernel pages have to be marked as shared in order to not perform
CASID verification.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
By default, TASK_SIZE is set to 0x80000000 for PPC_8xx, which is most
likely sufficient for most cases. However, kernel configuration allows
to set TASK_SIZE to another value, so the 8xx shall handle it.
This patch also takes into account the case of PAGE_OFFSET lower than
0x80000000, allthought most of the time it is equal to 0xC0000000
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
We now have SPRG2 available as in it not used anymore for saving CR, so we don't
need to crash DAR anymore for saving r3 for CPU6 ERRATA handling.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
CR only needs to be preserved when checking if we are handling a kernel address.
So we can preserve CR in a register:
- In ITLBMiss, check is done only when CONFIG_MODULES is defined. Otherwise we
don't need to do anything at all with CR.
- We use r10, then we reload SRR0/MD_EPN into r10 when CR is restored
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
In order to be able to reduce scope during which CR is saved, we take
CR saving/restoring out of exception PROLOG and EPILOG
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Having a macro will help keep clear code.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
This function can run on systems where physical addresses don't
fit in unsigned long, so make sure to use the macro that contains the
proper cast.
Signed-off-by: Scott Wood <scottwood@freescale.com>
mmu_virtual_psize shall be set to MMU_PAGE_16K when 16k pages have
been selected
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
T1023RDB is a Freescale Reference Design Board that hosts T1023 SoC.
T1023RDB board Overview
-----------------------
- T1023 SoC integrating two 64-bit e5500 cores up to 1.4GHz
- CoreNet fabric supporting coherent and noncoherent transactions with
prioritization and bandwidth allocation
- Memory: 2GB Micron MT40A512M8HX unbuffered 32-bit fixed DDR4 without ECC
- Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
- Ethernet interfaces:
- one 1G RGMII port on-board(RTL8211F PHY)
- one 1G SGMII port on-board(RTL8211F PHY)
- one 2.5G SGMII port on-board(AQR105 PHY)
- PCIe: Two Mini-PCIe connectors on-board.
- SerDes: 4 lanes up to 10.3125GHz
- NOR: 128MB S29GL01GS110TFIV10 Spansion NOR Flash
- NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash
- eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash
- USB: one Type-A USB 2.0 port with internal PHY
- eSDHC: support SD/MMC card and eMMC flash on-board
- 256Kbit M24256 I2C EEPROM
- RTC: Real-time clock DS1339 on I2C bus
- UART: one serial port on-board with RJ45 connector
- Debugging: JTAG/COP for T1023 debugging
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
T1024RDB is a Freescale Reference Design Board that hosts the T1024 SoC.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[scottwood: vendor prefix: s/at24/atmel/ and trimmed detailed
board description with too-long lines]
Signed-off-by: Scott Wood <scottwood@freescale.com>
Add support for Freescale T1024/T1023 QorIQ Development System Board.
T1024QDS is a high-performance computing evaluation, development and
test platform for T1024 QorIQ Power Architecture processor.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[scottwood: vendor prefix: s/at24/atmel/ and trimmed detailed
board description with too-long lines]
Signed-off-by: Scott Wood <scottwood@freescale.com>
The T1024 SoC includes the following function and features:
- Two 64-bit Power architecture e5500 cores, up to 1.4GHz
- private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC)
- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
- Data Path Acceleration Architecture (DPAA) incorporating acceleration
- Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI)
- High-speed peripheral interfaces
- Three PCI Express 2.0 controllers
- Additional peripheral interfaces
- One SATA 2.0 controller
- Two USB 2.0 controllers with integrated PHY
- Enhanced secure digital host controller (SD/eSDHC/eMMC)
- Enhanced serial peripheral interface (eSPI)
- Four I2C controllers
- Four 2-pin UARTs or two 4-pin UARTs
- Integrated Flash Controller supporting NAND and NOR flash
- Two 8-channel DMA engines
- Multicore programmable interrupt controller (PIC)
- LCD interface (DIU) with 12 bit dual data rate
- QUICC Engine block supporting TDM, HDLC, and UART
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
- Support for hardware virtualization and partitioning enforcement
- QorIQ Platform's Trust Architecture 2.0
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[scottwood@freescale.com: whitespace fixes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
This code can never be executed as it is only built when
CONFIG_PPC_E500MC is unset, but the only CPUs that have CPU_FTR_L2CSR
require CONFIG_PPC_E500MC and do not have the MSR/HID0-based nap
mechanism that this file uses.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Some workloads take a lot of TLB misses despite using traditional
hugepages. Handle these TLB misses in the asm fastpath rather than
going through a bunch of C code. With this patch I measured around a
5x speedup in handling hugepage TLB misses.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com>
Change-Id: Ic5f28f7b492b708f00a5ff74dda723ce5e1da0ba
Signed-off-by: Scott Wood <scottwood@freescale.com>
This splits off the reservation of the memory occupied by the FDT
binary itself from the processing of the memory reservations it
contains. This is necessary because the physical address of the FDT,
which is needed to perform the reservation, may not be known to the
FDT driver core, i.e., it may be mapped outside the linear direct
mapping, in which case __pa() returns a bogus value.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Rather than continuing to maintain a copy of pseries_defconfig with
CONFIG_CPU_LITTLE_ENDIAN enabled, use the generic merge_config script
and use an le.config to enable little endian on top of pseries_defconfig
without the need for a duplicated _defconfig file.
This method will require less maintenance in the future and will ensure
that both 'defconfigs' are always in sync.
It is worth noting that the seemingly more simple approach of:
pseries_le_defconfig: pseries_defconfig
$(Q)$(MAKE) le.config
Will not work when building using O=builddir.
The obvious fix to that:
pseries_le_defconfig:
$(Q)$(MAKE) -f $(srctree)/Makefile pseries_defconfig le.config
Also does not work. This is because if we have for example:
config FOO
depends on CPU_BIG_ENDIAN
select BAR
Then BAR will be enabled by the first call to kconfig (via
pseries_defconfig), and then will remain enabled after we merge
le.config, even though FOO will have been turned off.
The solution is to ensure to only invoke the kconfig logic once, after
we have merged all the config fragments. This ensures nothing is
select'ed on that should then be disabled by the later merged configs.
This is done through the explicit call to make olddefconfig
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Reviewed-by: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com>
[mpe: Massage change log, fix white space and use ARCH not SRCARCH]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
These two configs should be identical with the exception of big or little
endian.
The big endian version has XMON_DEFAULT turned on while the little endian
has XMON_DEFAULT not set. It makes the most sense for defconfigs not to use
xmon by default, production systems should get back up as quickly as
possible, not sit in xmon.
In the event debugging is required, the option can be enabled or xmon=on
can be specified on commandline.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we
already have a pointer to corresponding irq_desc.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull RCU changes from Paul E. McKenney:
- Initialization/Kconfig updates: hide most Kconfig options from unsuspecting users.
There's now a single high level configuration option:
*
* RCU Subsystem
*
Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)
Which if answered in the negative, leaves us with a single interactive
configuration option:
Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)
All the rest of the RCU options are configured automatically.
- Remove all uses of RCU-protected array indexes: replace the
rcu_[access|dereference]_index_check() APIs with READ_ONCE() and rcu_lockdep_assert().
- RCU CPU-hotplug cleanups.
- Updates to Tiny RCU: a race fix and further code shrinkage.
- RCU torture-testing updates: fixes, speedups, cleanups and
documentation updates.
- Miscellaneous fixes.
- Documentation updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We need to use a trampoline when using LOAD_HANDLER(), because the
destination needs to be in the first 64kB. An absolute branch has
no such limitations, so just jump there.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We had some code to restore the LR in the relocatable system call path
back when we used the LR to do an indirect branch.
Commit 6a404806df ("powerpc: Avoid link stack corruption in MMU
on syscall entry path") changed this to use the CTR which is volatile
across system calls so does not need restoring.
Remove the stale comment and the restore of the LR.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we take a PMU exception or a software event we call
perf_read_regs(). This overloads regs->result with a boolean that
describes if we should use the sampled instruction address register
(SIAR) or the regs.
If the exception is in kernel, we start with the kernel regs and
backtrace through the kernel stack. At this point we switch to the
userspace regs and backtrace the user stack with perf_callchain_user().
Unfortunately these regs have not got the perf_read_regs() treatment,
so regs->result could be anything. If it is non zero,
perf_instruction_pointer() decides to use the SIAR, and we get issues
like this:
0.11% qemu-system-ppc [kernel.kallsyms] [k] _raw_spin_lock_irqsave
|
---_raw_spin_lock_irqsave
|
|--52.35%-- 0
| |
| |--46.39%-- __hrtimer_start_range_ns
| | kvmppc_run_core
| | kvmppc_vcpu_run_hv
| | kvmppc_vcpu_run
| | kvm_arch_vcpu_ioctl_run
| | kvm_vcpu_ioctl
| | do_vfs_ioctl
| | sys_ioctl
| | system_call
| | |
| | |--67.08%-- _raw_spin_lock_irqsave <--- hi mum
| | | |
| | | --100.00%-- 0x7e714
| | | 0x7e714
Notice the bogus _raw_spin_irqsave when we transition from kernel
(system_call) to userspace (0x7e714). We inserted what was in the SIAR.
Add a check in regs_use_siar() to check that the regs in question
are from a PMU exception. With this fix the backtrace makes sense:
0.47% qemu-system-ppc [kernel.vmlinux] [k] _raw_spin_lock_irqsave
|
---_raw_spin_lock_irqsave
|
|--53.83%-- 0
| |
| |--44.73%-- hrtimer_try_to_cancel
| | kvmppc_start_thread
| | kvmppc_run_core
| | kvmppc_vcpu_run_hv
| | kvmppc_vcpu_run
| | kvm_arch_vcpu_ioctl_run
| | kvm_vcpu_ioctl
| | do_vfs_ioctl
| | sys_ioctl
| | system_call
| | __ioctl
| | 0x7e714
| | 0x7e714
Cc: stable@vger.kernel.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If both STRICT_MM_TYPECHECKS and DEBUG_PAGEALLOC are enabled, the code
in kernel_map_linear_page() is built, and so we fail with:
arch/powerpc/mm/hash_utils_64.c:1478:2:
error: incompatible type for argument 1 of 'htab_convert_pte_flags'
Fix it by using pgprot_val().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Previously, dma_set_mask() on powernv was convoluted:
0) Call dma_set_mask() (a/p/kernel/dma.c)
1) In dma_set_mask(), ppc_md.dma_set_mask() exists, so call it.
2) On powernv, that function pointer is pnv_dma_set_mask().
In pnv_dma_set_mask(), the device is pci, so call pnv_pci_dma_set_mask().
3) In pnv_pci_dma_set_mask(), call pnv_phb->set_dma_mask() if it exists.
4) It only exists in the ioda case, where it points to
pnv_pci_ioda_dma_set_mask(), which is the final function.
So the call chain is:
dma_set_mask() ->
pnv_dma_set_mask() ->
pnv_pci_dma_set_mask() ->
pnv_pci_ioda_dma_set_mask()
Both ppc_md and pnv_phb function pointers are used.
Rip out the ppc_md call, pnv_dma_set_mask() and pnv_pci_dma_set_mask().
Instead:
0) Call dma_set_mask() (a/p/kernel/dma.c)
1) In dma_set_mask(), the device is pci, and pci_controller_ops.dma_set_mask()
exists, so call pci_controller_ops.dma_set_mask()
2) In the ioda case, that points to pnv_pci_ioda_dma_set_mask().
The new call chain is
dma_set_mask() ->
pnv_pci_ioda_dma_set_mask()
Now only the pci_controller_ops function pointer is used.
The fallback paths for p5ioc2 are the same.
Previously, pnv_pci_dma_set_mask() would find no pnv_phb->set_dma_mask()
function, to it would call __set_dma_mask().
Now, dma_set_mask() finds no ppc_md call or pci_controller_ops call,
so it calls __set_dma_mask().
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some systems only need to deal with DMA masks for PCI devices.
For these systems, we can avoid the need for a platform hook and
instead use a pci controller based hook.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove powernv generic PCI controller operations. Replace it with
controller ops for each of the two supported PHBs.
As an added bonus, make the two new structs const, which will help
guard against bugs such as the one introduced in 65ebf4b63
("powerpc/powernv: Move controller ops from ppc_md to controller_ops")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove unneeded ppc_md functions. Patch callsites to use pci_controller_ops
functions exclusively.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the u3 MPIC msi subsystem to use the pci_controller_ops structure
rather than ppc_md for MSI related PCI controller operations.
As with fsl_msi, operations are plugged in at the subsys level, after
controller creation. Again, we iterate over all controllers and
populate them with the MSI ops.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the PaSemi MPIC msi subsystem to use the pci_controller_ops
structure rather than ppc_md for MSI related PCI controller
operations.
As with fsl_msi, operations are plugged in at the subsys level, after
controller creation. Again, we iterate over all controllers and
populate them with the MSI ops.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the ppc4xx hsta msi subsystem to use the pci_controller_ops
structure rather than ppc_md for MSI related PCI controller
operations.
As with fsl_msi, operations are plugged in at the subsys level, after
controller creation. Again, we iterate over all controllers and
populate them with the MSI ops.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
