mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 10:14:25 +07:00
0836275df4
511 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Zou Wei
|
89f33dcadb |
bpf: remove unneeded conversion to bool in __mark_reg_unknown
This issue was detected by using the Coccinelle software: kernel/bpf/verifier.c:1259:16-21: WARNING: conversion to bool not needed here The conversion to bool is unneeded, remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/1586779076-101346-1-git-send-email-zou_wei@huawei.com |
||
|
John Fastabend
|
fa123ac022 |
bpf: Verifier, refine 32bit bound in do_refine_retval_range
Further refine return values range in do_refine_retval_range by noting
these are int return types (We will assume here that int is a 32-bit type).
Two reasons to pull this out of original patch. First it makes the original
fix impossible to backport. And second I've not seen this as being problematic
in practice unlike the other case.
Fixes:
|
||
|
John Fastabend
|
3f50f132d8 |
bpf: Verifier, do explicit ALU32 bounds tracking
It is not possible for the current verifier to track ALU32 and JMP ops
correctly. This can result in the verifier aborting with errors even though
the program should be verifiable. BPF codes that hit this can work around
it by changin int variables to 64-bit types, marking variables volatile,
etc. But this is all very ugly so it would be better to avoid these tricks.
But, the main reason to address this now is do_refine_retval_range() was
assuming return values could not be negative. Once we fixed this code that
was previously working will no longer work. See do_refine_retval_range()
patch for details. And we don't want to suddenly cause programs that used
to work to fail.
The simplest example code snippet that illustrates the problem is likely
this,
53: w8 = w0 // r8 <- [0, S32_MAX],
// w8 <- [-S32_MIN, X]
54: w8 <s 0 // r8 <- [0, U32_MAX]
// w8 <- [0, X]
The expected 64-bit and 32-bit bounds after each line are shown on the
right. The current issue is without the w* bounds we are forced to use
the worst case bound of [0, U32_MAX]. To resolve this type of case,
jmp32 creating divergent 32-bit bounds from 64-bit bounds, we add explicit
32-bit register bounds s32_{min|max}_value and u32_{min|max}_value. Then
from branch_taken logic creating new bounds we can track 32-bit bounds
explicitly.
The next case we observed is ALU ops after the jmp32,
53: w8 = w0 // r8 <- [0, S32_MAX],
// w8 <- [-S32_MIN, X]
54: w8 <s 0 // r8 <- [0, U32_MAX]
// w8 <- [0, X]
55: w8 += 1 // r8 <- [0, U32_MAX+1]
// w8 <- [0, X+1]
In order to keep the bounds accurate at this point we also need to track
ALU32 ops. To do this we add explicit ALU32 logic for each of the ALU
ops, mov, add, sub, etc.
Finally there is a question of how and when to merge bounds. The cases
enumerate here,
1. MOV ALU32 - zext 32-bit -> 64-bit
2. MOV ALU64 - copy 64-bit -> 32-bit
3. op ALU32 - zext 32-bit -> 64-bit
4. op ALU64 - n/a
5. jmp ALU32 - 64-bit: var32_off | upper_32_bits(var64_off)
6. jmp ALU64 - 32-bit: (>> (<< var64_off))
Details for each case,
For "MOV ALU32" BPF arch zero extends so we simply copy the bounds
from 32-bit into 64-bit ensuring we truncate var_off and 64-bit
bounds correctly. See zext_32_to_64.
For "MOV ALU64" copy all bounds including 32-bit into new register. If
the src register had 32-bit bounds the dst register will as well.
For "op ALU32" zero extend 32-bit into 64-bit the same as move,
see zext_32_to_64.
For "op ALU64" calculate both 32-bit and 64-bit bounds no merging
is done here. Except we have a special case. When RSH or ARSH is
done we can't simply ignore shifting bits from 64-bit reg into the
32-bit subreg. So currently just push bounds from 64-bit into 32-bit.
This will be correct in the sense that they will represent a valid
state of the register. However we could lose some accuracy if an
ARSH is following a jmp32 operation. We can handle this special
case in a follow up series.
For "jmp ALU32" mark 64-bit reg unknown and recalculate 64-bit bounds
from tnum by setting var_off to ((<<(>>var_off)) | var32_off). We
special case if 64-bit bounds has zero'd upper 32bits at which point
we can simply copy 32-bit bounds into 64-bit register. This catches
a common compiler trick where upper 32-bits are zeroed and then
32-bit ops are used followed by a 64-bit compare or 64-bit op on
a pointer. See __reg_combine_64_into_32().
For "jmp ALU64" cast the bounds of the 64bit to their 32-bit
counterpart. For example s32_min_value = (s32)reg->smin_value. For
tnum use only the lower 32bits via, (>>(<<var_off)). See
__reg_combine_64_into_32().
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158560419880.10843.11448220440809118343.stgit@john-Precision-5820-Tower
|
||
|
John Fastabend
|
100605035e |
bpf: Verifier, do_refine_retval_range may clamp umin to 0 incorrectly
do_refine_retval_range() is called to refine return values from specified
helpers, probe_read_str and get_stack at the moment, the reasoning is
because both have a max value as part of their input arguments and
because the helper ensure the return value will not be larger than this
we can set smax values of the return register, r0.
However, the return value is a signed integer so setting umax is incorrect
It leads to further confusion when the do_refine_retval_range() then calls,
__reg_deduce_bounds() which will see a umax value as meaning the value is
unsigned and then assuming it is unsigned set the smin = umin which in this
case results in 'smin = 0' and an 'smax = X' where X is the input argument
from the helper call.
Here are the comments from _reg_deduce_bounds() on why this would be safe
to do.
/* Learn sign from unsigned bounds. Signed bounds cross the sign
* boundary, so we must be careful.
*/
if ((s64)reg->umax_value >= 0) {
/* Positive. We can't learn anything from the smin, but smax
* is positive, hence safe.
*/
reg->smin_value = reg->umin_value;
reg->smax_value = reg->umax_value = min_t(u64, reg->smax_value,
reg->umax_value);
But now we incorrectly have a return value with type int with the
signed bounds (0,X). Suppose the return value is negative, which is
possible the we have the verifier and reality out of sync. Among other
things this may result in any error handling code being falsely detected
as dead-code and removed. For instance the example below shows using
bpf_probe_read_str() causes the error path to be identified as dead
code and removed.
>From the 'llvm-object -S' dump,
r2 = 100
call 45
if r0 s< 0 goto +4
r4 = *(u32 *)(r7 + 0)
But from dump xlate
(b7) r2 = 100
(85) call bpf_probe_read_compat_str#-96768
(61) r4 = *(u32 *)(r7 +0) <-- dropped if goto
Due to verifier state after call being
R0=inv(id=0,umax_value=100,var_off=(0x0; 0x7f))
To fix omit setting the umax value because its not safe. The only
actual bounds we know is the smax. This results in the correct bounds
(SMIN, X) where X is the max length from the helper. After this the
new verifier state looks like the following after call 45.
R0=inv(id=0,smax_value=100)
Then xlated version no longer removed dead code giving the expected
result,
(b7) r2 = 100
(85) call bpf_probe_read_compat_str#-96768
(c5) if r0 s< 0x0 goto pc+4
(61) r4 = *(u32 *)(r7 +0)
Note, bpf_probe_read_* calls are root only so we wont hit this case
with non-root bpf users.
v3: comment had some documentation about meta set to null case which
is not relevant here and confusing to include in the comment.
v2 note: In original version we set msize_smax_value from check_func_arg()
and propagated this into smax of retval. The logic was smax is the bound
on the retval we set and because the type in the helper is ARG_CONST_SIZE
we know that the reg is a positive tnum_const() so umax=smax. Alexei
pointed out though this is a bit odd to read because the register in
check_func_arg() has a C type of u32 and the umax bound would be the
normally relavent bound here. Pulling in extra knowledge about future
checks makes reading the code a bit tricky. Further having a signed
meta data that can only ever be positive is also a bit odd. So dropped
the msize_smax_value metadata and made it a u64 msize_max_value to
indicate its unsigned. And additionally save bound from umax value in
check_arg_funcs which is the same as smax due to as noted above tnumx_cont
and negative check but reads better. By my analysis nothing functionally
changes in v2 but it does get easier to read so that is win.
Fixes:
|
||
|
Jann Horn
|
0fc31b10cf |
bpf: Simplify reg_set_min_max_inv handling
reg_set_min_max_inv() contains exactly the same logic as reg_set_min_max(), just flipped around. While this makes sense in a cBPF verifier (where ALU operations are not symmetric), it does not make sense for eBPF. Replace reg_set_min_max_inv() with a helper that flips the opcode around, then lets reg_set_min_max() do the complicated work. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200330160324.15259-4-daniel@iogearbox.net |
||
|
Jann Horn
|
604dca5e3a |
bpf: Fix tnum constraints for 32-bit comparisons
The BPF verifier tried to track values based on 32-bit comparisons by (ab)using the tnum state via |
||
|
Daniel Borkmann
|
f2d67fec0b |
bpf: Undo incorrect __reg_bound_offset32 handling
Anatoly has been fuzzing with kBdysch harness and reported a hang in
one of the outcomes:
0: (b7) r0 = 808464432
1: (7f) r0 >>= r0
2: (14) w0 -= 808464432
3: (07) r0 += 808464432
4: (b7) r1 = 808464432
5: (de) if w1 s<= w0 goto pc+0
R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x30303020;0x10000001f)) R1_w=invP808464432 R10=fp0
6: (07) r0 += -2144337872
7: (14) w0 -= -1607454672
8: (25) if r0 > 0x30303030 goto pc+0
R0_w=invP(id=0,umin_value=271581184,umax_value=271581311,var_off=(0x10300000;0x7f)) R1_w=invP808464432 R10=fp0
9: (76) if w0 s>= 0x303030 goto pc+2
12: (95) exit
from 8 to 9: safe
from 5 to 6: R0_w=invP(id=0,umin_value=808464432,umax_value=5103431727,var_off=(0x30303020;0x10000001f)) R1_w=invP808464432 R10=fp0
6: (07) r0 += -2144337872
7: (14) w0 -= -1607454672
8: (25) if r0 > 0x30303030 goto pc+0
R0_w=invP(id=0,umin_value=271581184,umax_value=271581311,var_off=(0x10300000;0x7f)) R1_w=invP808464432 R10=fp0
9: safe
from 8 to 9: safe
verification time 589 usec
stack depth 0
processed 17 insns (limit 1000000) [...]
The underlying program was xlated as follows:
# bpftool p d x i 9
0: (b7) r0 = 808464432
1: (7f) r0 >>= r0
2: (14) w0 -= 808464432
3: (07) r0 += 808464432
4: (b7) r1 = 808464432
5: (de) if w1 s<= w0 goto pc+0
6: (07) r0 += -2144337872
7: (14) w0 -= -1607454672
8: (25) if r0 > 0x30303030 goto pc+0
9: (76) if w0 s>= 0x303030 goto pc+2
10: (05) goto pc-1
11: (05) goto pc-1
12: (95) exit
The verifier rewrote original instructions it recognized as dead code with
'goto pc-1', but reality differs from verifier simulation in that we're
actually able to trigger a hang due to hitting the 'goto pc-1' instructions.
Taking different examples to make the issue more obvious: in this example
we're probing bounds on a completely unknown scalar variable in r1:
[...]
5: R0_w=inv1 R1_w=inv(id=0) R10=fp0
5: (18) r2 = 0x4000000000
7: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R10=fp0
7: (18) r3 = 0x2000000000
9: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R3_w=inv137438953472 R10=fp0
9: (18) r4 = 0x400
11: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R10=fp0
11: (18) r5 = 0x200
13: R0_w=inv1 R1_w=inv(id=0) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0
13: (2d) if r1 > r2 goto pc+4
R0_w=inv1 R1_w=inv(id=0,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0
14: R0_w=inv1 R1_w=inv(id=0,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0
14: (ad) if r1 < r3 goto pc+3
R0_w=inv1 R1_w=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2_w=inv274877906944 R3_w=inv137438953472 R4_w=inv1024 R5_w=inv512 R10=fp0
15: R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7fffffffff)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0
15: (2e) if w1 > w4 goto pc+2
R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7f00000000)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0
16: R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7f00000000)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0
16: (ae) if w1 < w5 goto pc+1
R0=inv1 R1=inv(id=0,umin_value=137438953472,umax_value=274877906944,var_off=(0x0; 0x7f00000000)) R2=inv274877906944 R3=inv137438953472 R4=inv1024 R5=inv512 R10=fp0
[...]
We're first probing lower/upper bounds via jmp64, later we do a similar
check via jmp32 and examine the resulting var_off there. After fall-through
in insn 14, we get the following bounded r1 with 0x7fffffffff unknown marked
bits in the variable section.
Thus, after knowing r1 <= 0x4000000000 and r1 >= 0x2000000000:
max: 0b100000000000000000000000000000000000000 / 0x4000000000
var: 0b111111111111111111111111111111111111111 / 0x7fffffffff
min: 0b010000000000000000000000000000000000000 / 0x2000000000
Now, in insn 15 and 16, we perform a similar probe with lower/upper bounds
in jmp32.
Thus, after knowing r1 <= 0x4000000000 and r1 >= 0x2000000000 and
w1 <= 0x400 and w1 >= 0x200:
max: 0b100000000000000000000000000000000000000 / 0x4000000000
var: 0b111111100000000000000000000000000000000 / 0x7f00000000
min: 0b010000000000000000000000000000000000000 / 0x2000000000
The lower/upper bounds haven't changed since they have high bits set in
u64 space and the jmp32 tests can only refine bounds in the low bits.
However, for the var part the expectation would have been 0x7f000007ff
or something less precise up to 0x7fffffffff. A outcome of 0x7f00000000
is not correct since it would contradict the earlier probed bounds
where we know that the result should have been in [0x200,0x400] in u32
space. Therefore, tests with such info will lead to wrong verifier
assumptions later on like falsely predicting conditional jumps to be
always taken, etc.
The issue here is that __reg_bound_offset32()'s implementation from
commit
|
||
|
KP Singh
|
9e4e01dfd3 |
bpf: lsm: Implement attach, detach and execution
JITed BPF programs are dynamically attached to the LSM hooks using BPF trampolines. The trampoline prologue generates code to handle conversion of the signature of the hook to the appropriate BPF context. The allocated trampoline programs are attached to the nop functions initialized as LSM hooks. BPF_PROG_TYPE_LSM programs must have a GPL compatible license and and need CAP_SYS_ADMIN (required for loading eBPF programs). Upon attachment: * A BPF fexit trampoline is used for LSM hooks with a void return type. * A BPF fmod_ret trampoline is used for LSM hooks which return an int. The attached programs can override the return value of the bpf LSM hook to indicate a MAC Policy decision. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Brendan Jackman <jackmanb@google.com> Reviewed-by: Florent Revest <revest@google.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/bpf/20200329004356.27286-5-kpsingh@chromium.org |
||
|
Daniel Borkmann
|
f318903c0b |
bpf: Add netns cookie and enable it for bpf cgroup hooks
In Cilium we're mainly using BPF cgroup hooks today in order to implement
kube-proxy free Kubernetes service translation for ClusterIP, NodePort (*),
ExternalIP, and LoadBalancer as well as HostPort mapping [0] for all traffic
between Cilium managed nodes. While this works in its current shape and avoids
packet-level NAT for inter Cilium managed node traffic, there is one major
limitation we're facing today, that is, lack of netns awareness.
In Kubernetes, the concept of Pods (which hold one or multiple containers)
has been built around network namespaces, so while we can use the global scope
of attaching to root BPF cgroup hooks also to our advantage (e.g. for exposing
NodePort ports on loopback addresses), we also have the need to differentiate
between initial network namespaces and non-initial one. For example, ExternalIP
services mandate that non-local service IPs are not to be translated from the
host (initial) network namespace as one example. Right now, we have an ugly
work-around in place where non-local service IPs for ExternalIP services are
not xlated from connect() and friends BPF hooks but instead via less efficient
packet-level NAT on the veth tc ingress hook for Pod traffic.
On top of determining whether we're in initial or non-initial network namespace
we also have a need for a socket-cookie like mechanism for network namespaces
scope. Socket cookies have the nice property that they can be combined as part
of the key structure e.g. for BPF LRU maps without having to worry that the
cookie could be recycled. We are planning to use this for our sessionAffinity
implementation for services. Therefore, add a new bpf_get_netns_cookie() helper
which would resolve both use cases at once: bpf_get_netns_cookie(NULL) would
provide the cookie for the initial network namespace while passing the context
instead of NULL would provide the cookie from the application's network namespace.
We're using a hole, so no size increase; the assignment happens only once.
Therefore this allows for a comparison on initial namespace as well as regular
cookie usage as we have today with socket cookies. We could later on enable
this helper for other program types as well as we would see need.
(*) Both externalTrafficPolicy={Local|Cluster} types
[0] https://github.com/cilium/cilium/blob/master/bpf/bpf_sock.c
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/c47d2346982693a9cf9da0e12690453aded4c788.1585323121.git.daniel@iogearbox.net
|
||
|
John Fastabend
|
294f2fc6da |
bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()
Currently, for all op verification we call __red_deduce_bounds() and __red_bound_offset() but we only call __update_reg_bounds() in bitwise ops. However, we could benefit from calling __update_reg_bounds() in BPF_ADD, BPF_SUB, and BPF_MUL cases as well. For example, a register with state 'R1_w=invP0' when we subtract from it, w1 -= 2 Before coerce we will now have an smin_value=S64_MIN, smax_value=U64_MAX and unsigned bounds umin_value=0, umax_value=U64_MAX. These will then be clamped to S32_MIN, U32_MAX values by coerce in the case of alu32 op as done in above example. However tnum will be a constant because the ALU op is done on a constant. Without update_reg_bounds() we have a scenario where tnum is a const but our unsigned bounds do not reflect this. By calling update_reg_bounds after coerce to 32bit we further refine the umin_value to U64_MAX in the alu64 case or U32_MAX in the alu32 case above. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158507151689.15666.566796274289413203.stgit@john-Precision-5820-Tower |
||
|
John Fastabend
|
07cd263148 |
bpf: Verifer, refactor adjust_scalar_min_max_vals
Pull per op ALU logic into individual functions. We are about to add u32 versions of each of these by pull them out the code gets a bit more readable here and nicer in the next patch. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158507149518.15666.15672349629329072411.stgit@john-Precision-5820-Tower |
||
|
Eelco Chaudron
|
d831ee84bf |
bpf: Add bpf_xdp_output() helper
Introduce new helper that reuses existing xdp perf_event output implementation, but can be called from raw_tracepoint programs that receive 'struct xdp_buff *' as a tracepoint argument. Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/158348514556.2239.11050972434793741444.stgit@xdp-tutorial |
||
|
KP Singh
|
69191754ff |
bpf: Remove unnecessary CAP_MAC_ADMIN check
While well intentioned, checking CAP_MAC_ADMIN for attaching
BPF_MODIFY_RETURN tracing programs to "security_" functions is not
necessary as tracing BPF programs already require CAP_SYS_ADMIN.
Fixes:
|
||
|
KP Singh
|
6ba43b761c |
bpf: Attachment verification for BPF_MODIFY_RETURN
- Allow BPF_MODIFY_RETURN attachment only to functions that are:
* Whitelisted for error injection by checking
within_error_injection_list. Similar discussions happened for the
bpf_override_return helper.
* security hooks, this is expected to be cleaned up with the LSM
changes after the KRSI patches introduce the LSM_HOOK macro:
https://lore.kernel.org/bpf/20200220175250.10795-1-kpsingh@chromium.org/
- The attachment is currently limited to functions that return an int.
This can be extended later other types (e.g. PTR).
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-5-kpsingh@chromium.org
|
||
|
KP Singh
|
ae24082331 |
bpf: Introduce BPF_MODIFY_RETURN
When multiple programs are attached, each program receives the return
value from the previous program on the stack and the last program
provides the return value to the attached function.
The fmod_ret bpf programs are run after the fentry programs and before
the fexit programs. The original function is only called if all the
fmod_ret programs return 0 to avoid any unintended side-effects. The
success value, i.e. 0 is not currently configurable but can be made so
where user-space can specify it at load time.
For example:
int func_to_be_attached(int a, int b)
{ <--- do_fentry
do_fmod_ret:
<update ret by calling fmod_ret>
if (ret != 0)
goto do_fexit;
original_function:
<side_effects_happen_here>
} <--- do_fexit
The fmod_ret program attached to this function can be defined as:
SEC("fmod_ret/func_to_be_attached")
int BPF_PROG(func_name, int a, int b, int ret)
{
// This will skip the original function logic.
return 1;
}
The first fmod_ret program is passed 0 in its return argument.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-4-kpsingh@chromium.org
|
||
|
Thomas Gleixner
|
2ed905c521 |
bpf: Enforce preallocation for instrumentation programs on RT
Aside of the general unsafety of run-time map allocation for instrumentation type programs RT enabled kernels have another constraint: The instrumentation programs are invoked with preemption disabled, but the memory allocator spinlocks cannot be acquired in atomic context because they are converted to 'sleeping' spinlocks on RT. Therefore enforce map preallocation for these programs types when RT is enabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200224145642.648784007@linutronix.de |
||
|
Thomas Gleixner
|
94dacdbd5d |
bpf: Tighten the requirements for preallocated hash maps
The assumption that only programs attached to perf NMI events can deadlock
on memory allocators is wrong. Assume the following simplified callchain:
kmalloc() from regular non BPF context
cache empty
freelist empty
lock(zone->lock);
tracepoint or kprobe
BPF()
update_elem()
lock(bucket)
kmalloc()
cache empty
freelist empty
lock(zone->lock); <- DEADLOCK
There are other ways which do not involve locking to create wreckage:
kmalloc() from regular non BPF context
local_irq_save();
...
obj = slab_first();
kprobe()
BPF()
update_elem()
lock(bucket)
kmalloc()
local_irq_save();
...
obj = slab_first(); <- Same object as above ...
So preallocation _must_ be enforced for all variants of intrusive
instrumentation.
Unfortunately immediate enforcement would break backwards compatibility, so
for now such programs still are allowed to run, but a one time warning is
emitted in dmesg and the verifier emits a warning in the verifier log as
well so developers are made aware about this and can fix their programs
before the enforcement becomes mandatory.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145642.540542802@linutronix.de
|
||
|
Jakub Sitnicki
|
9fed9000c5 |
bpf: Allow selecting reuseport socket from a SOCKMAP/SOCKHASH
SOCKMAP & SOCKHASH now support storing references to listening
sockets. Nothing keeps us from using these map types a collection of
sockets to select from in BPF reuseport programs. Whitelist the map types
with the bpf_sk_select_reuseport helper.
The restriction that the socket has to be a member of a reuseport group
still applies. Sockets in SOCKMAP/SOCKHASH that don't have sk_reuseport_cb
set are not a valid target and we signal it with -EINVAL.
The main benefit from this change is that, in contrast to
REUSEPORT_SOCKARRAY, SOCK{MAP,HASH} don't impose a restriction that a
listening socket can be just one BPF map at the same time.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200218171023.844439-9-jakub@cloudflare.com
|
||
|
David S. Miller
|
954b3c4397 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-01-22 The following pull-request contains BPF updates for your *net-next* tree. We've added 92 non-merge commits during the last 16 day(s) which contain a total of 320 files changed, 7532 insertions(+), 1448 deletions(-). The main changes are: 1) function by function verification and program extensions from Alexei. 2) massive cleanup of selftests/bpf from Toke and Andrii. 3) batched bpf map operations from Brian and Yonghong. 4) tcp congestion control in bpf from Martin. 5) bulking for non-map xdp_redirect form Toke. 6) bpf_send_signal_thread helper from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Martin KaFai Lau
|
5576b991e9 |
bpf: Add BPF_FUNC_jiffies64
This patch adds a helper to read the 64bit jiffies. It will be used in a later patch to implement the bpf_cubic.c. The helper is inlined for jit_requested and 64 BITS_PER_LONG as the map_gen_lookup(). Other cases could be considered together with map_gen_lookup() if needed. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200122233646.903260-1-kafai@fb.com |
||
|
Alexei Starovoitov
|
be8704ff07 |
bpf: Introduce dynamic program extensions
Introduce dynamic program extensions. The users can load additional BPF functions and replace global functions in previously loaded BPF programs while these programs are executing. Global functions are verified individually by the verifier based on their types only. Hence the global function in the new program which types match older function can safely replace that corresponding function. This new function/program is called 'an extension' of old program. At load time the verifier uses (attach_prog_fd, attach_btf_id) pair to identify the function to be replaced. The BPF program type is derived from the target program into extension program. Technically bpf_verifier_ops is copied from target program. The BPF_PROG_TYPE_EXT program type is a placeholder. It has empty verifier_ops. The extension program can call the same bpf helper functions as target program. Single BPF_PROG_TYPE_EXT type is used to extend XDP, SKB and all other program types. The verifier allows only one level of replacement. Meaning that the extension program cannot recursively extend an extension. That also means that the maximum stack size is increasing from 512 to 1024 bytes and maximum function nesting level from 8 to 16. The programs don't always consume that much. The stack usage is determined by the number of on-stack variables used by the program. The verifier could have enforced 512 limit for combined original plus extension program, but it makes for difficult user experience. The main use case for extensions is to provide generic mechanism to plug external programs into policy program or function call chaining. BPF trampoline is used to track both fentry/fexit and program extensions because both are using the same nop slot at the beginning of every BPF function. Attaching fentry/fexit to a function that was replaced is not allowed. The opposite is true as well. Replacing a function that currently being analyzed with fentry/fexit is not allowed. The executable page allocated by BPF trampoline is not used by program extensions. This inefficiency will be optimized in future patches. Function by function verification of global function supports scalars and pointer to context only. Hence program extensions are supported for such class of global functions only. In the future the verifier will be extended with support to pointers to structures, arrays with sizes, etc. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200121005348.2769920-2-ast@kernel.org |
||
|
Alexei Starovoitov
|
f59bbfc2f6 |
bpf: Fix error path under memory pressure
Restore the 'if (env->cur_state)' check that was incorrectly removed during
code move. Under memory pressure env->cur_state can be freed and zeroed inside
do_check(). Hence the check is necessary.
Fixes:
|
||
|
Daniel Borkmann
|
0af2ffc93a |
bpf: Fix incorrect verifier simulation of ARSH under ALU32
Anatoly has been fuzzing with kBdysch harness and reported a hang in one of the outcomes: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (85) call bpf_get_socket_cookie#46 1: R0_w=invP(id=0) R10=fp0 1: (57) r0 &= 808464432 2: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0 2: (14) w0 -= 810299440 3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0 3: (c4) w0 s>>= 1 4: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 4: (76) if w0 s>= 0x30303030 goto pc+216 221: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 221: (95) exit processed 6 insns (limit 1000000) [...] Taking a closer look, the program was xlated as follows: # ./bpftool p d x i 12 0: (85) call bpf_get_socket_cookie#7800896 1: (bf) r6 = r0 2: (57) r6 &= 808464432 3: (14) w6 -= 810299440 4: (c4) w6 s>>= 1 5: (76) if w6 s>= 0x30303030 goto pc+216 6: (05) goto pc-1 7: (05) goto pc-1 8: (05) goto pc-1 [...] 220: (05) goto pc-1 221: (05) goto pc-1 222: (95) exit Meaning, the visible effect is very similar to |
||
|
Alexei Starovoitov
|
51c39bb1d5 |
bpf: Introduce function-by-function verification
New llvm and old llvm with libbpf help produce BTF that distinguish global and
static functions. Unlike arguments of static function the arguments of global
functions cannot be removed or optimized away by llvm. The compiler has to use
exactly the arguments specified in a function prototype. The argument type
information allows the verifier validate each global function independently.
For now only supported argument types are pointer to context and scalars. In
the future pointers to structures, sizes, pointer to packet data can be
supported as well. Consider the following example:
static int f1(int ...)
{
...
}
int f3(int b);
int f2(int a)
{
f1(a) + f3(a);
}
int f3(int b)
{
...
}
int main(...)
{
f1(...) + f2(...) + f3(...);
}
The verifier will start its safety checks from the first global function f2().
It will recursively descend into f1() because it's static. Then it will check
that arguments match for the f3() invocation inside f2(). It will not descend
into f3(). It will finish f2() that has to be successfully verified for all
possible values of 'a'. Then it will proceed with f3(). That function also has
to be safe for all possible values of 'b'. Then it will start subprog 0 (which
is main() function). It will recursively descend into f1() and will skip full
check of f2() and f3(), since they are global. The order of processing global
functions doesn't affect safety, since all global functions must be proven safe
based on their arguments only.
Such function by function verification can drastically improve speed of the
verification and reduce complexity.
Note that the stack limit of 512 still applies to the call chain regardless whether
functions were static or global. The nested level of 8 also still applies. The
same recursion prevention checks are in place as well.
The type information and static/global kind is preserved after the verification
hence in the above example global function f2() and f3() can be replaced later
by equivalent functions with the same types that are loaded and verified later
without affecting safety of this main() program. Such replacement (re-linking)
of global functions is a subject of future patches.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-3-ast@kernel.org
|
||
|
Martin KaFai Lau
|
85d33df357 |
bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS
The patch introduces BPF_MAP_TYPE_STRUCT_OPS. The map value
is a kernel struct with its func ptr implemented in bpf prog.
This new map is the interface to register/unregister/introspect
a bpf implemented kernel struct.
The kernel struct is actually embedded inside another new struct
(or called the "value" struct in the code). For example,
"struct tcp_congestion_ops" is embbeded in:
struct bpf_struct_ops_tcp_congestion_ops {
refcount_t refcnt;
enum bpf_struct_ops_state state;
struct tcp_congestion_ops data; /* <-- kernel subsystem struct here */
}
The map value is "struct bpf_struct_ops_tcp_congestion_ops".
The "bpftool map dump" will then be able to show the
state ("inuse"/"tobefree") and the number of subsystem's refcnt (e.g.
number of tcp_sock in the tcp_congestion_ops case). This "value" struct
is created automatically by a macro. Having a separate "value" struct
will also make extending "struct bpf_struct_ops_XYZ" easier (e.g. adding
"void (*init)(void)" to "struct bpf_struct_ops_XYZ" to do some
initialization works before registering the struct_ops to the kernel
subsystem). The libbpf will take care of finding and populating the
"struct bpf_struct_ops_XYZ" from "struct XYZ".
Register a struct_ops to a kernel subsystem:
1. Load all needed BPF_PROG_TYPE_STRUCT_OPS prog(s)
2. Create a BPF_MAP_TYPE_STRUCT_OPS with attr->btf_vmlinux_value_type_id
set to the btf id "struct bpf_struct_ops_tcp_congestion_ops" of the
running kernel.
Instead of reusing the attr->btf_value_type_id,
btf_vmlinux_value_type_id s added such that attr->btf_fd can still be
used as the "user" btf which could store other useful sysadmin/debug
info that may be introduced in the furture,
e.g. creation-date/compiler-details/map-creator...etc.
3. Create a "struct bpf_struct_ops_tcp_congestion_ops" object as described
in the running kernel btf. Populate the value of this object.
The function ptr should be populated with the prog fds.
4. Call BPF_MAP_UPDATE with the object created in (3) as
the map value. The key is always "0".
During BPF_MAP_UPDATE, the code that saves the kernel-func-ptr's
args as an array of u64 is generated. BPF_MAP_UPDATE also allows
the specific struct_ops to do some final checks in "st_ops->init_member()"
(e.g. ensure all mandatory func ptrs are implemented).
If everything looks good, it will register this kernel struct
to the kernel subsystem. The map will not allow further update
from this point.
Unregister a struct_ops from the kernel subsystem:
BPF_MAP_DELETE with key "0".
Introspect a struct_ops:
BPF_MAP_LOOKUP_ELEM with key "0". The map value returned will
have the prog _id_ populated as the func ptr.
The map value state (enum bpf_struct_ops_state) will transit from:
INIT (map created) =>
INUSE (map updated, i.e. reg) =>
TOBEFREE (map value deleted, i.e. unreg)
The kernel subsystem needs to call bpf_struct_ops_get() and
bpf_struct_ops_put() to manage the "refcnt" in the
"struct bpf_struct_ops_XYZ". This patch uses a separate refcnt
for the purose of tracking the subsystem usage. Another approach
is to reuse the map->refcnt and then "show" (i.e. during map_lookup)
the subsystem's usage by doing map->refcnt - map->usercnt to filter out
the map-fd/pinned-map usage. However, that will also tie down the
future semantics of map->refcnt and map->usercnt.
The very first subsystem's refcnt (during reg()) holds one
count to map->refcnt. When the very last subsystem's refcnt
is gone, it will also release the map->refcnt. All bpf_prog will be
freed when the map->refcnt reaches 0 (i.e. during map_free()).
Here is how the bpftool map command will look like:
[root@arch-fb-vm1 bpf]# bpftool map show
6: struct_ops name dctcp flags 0x0
key 4B value 256B max_entries 1 memlock 4096B
btf_id 6
[root@arch-fb-vm1 bpf]# bpftool map dump id 6
[{
"value": {
"refcnt": {
"refs": {
"counter": 1
}
},
"state": 1,
"data": {
"list": {
"next": 0,
"prev": 0
},
"key": 0,
"flags": 2,
"init": 24,
"release": 0,
"ssthresh": 25,
"cong_avoid": 30,
"set_state": 27,
"cwnd_event": 28,
"in_ack_event": 26,
"undo_cwnd": 29,
"pkts_acked": 0,
"min_tso_segs": 0,
"sndbuf_expand": 0,
"cong_control": 0,
"get_info": 0,
"name": [98,112,102,95,100,99,116,99,112,0,0,0,0,0,0,0
],
"owner": 0
}
}
}
]
Misc Notes:
* bpf_struct_ops_map_sys_lookup_elem() is added for syscall lookup.
It does an inplace update on "*value" instead returning a pointer
to syscall.c. Otherwise, it needs a separate copy of "zero" value
for the BPF_STRUCT_OPS_STATE_INIT to avoid races.
* The bpf_struct_ops_map_delete_elem() is also called without
preempt_disable() from map_delete_elem(). It is because
the "->unreg()" may requires sleepable context, e.g.
the "tcp_unregister_congestion_control()".
* "const" is added to some of the existing "struct btf_func_model *"
function arg to avoid a compiler warning caused by this patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003505.3855919-1-kafai@fb.com
|
||
|
Martin KaFai Lau
|
27ae7997a6 |
bpf: Introduce BPF_PROG_TYPE_STRUCT_OPS
This patch allows the kernel's struct ops (i.e. func ptr) to be implemented in BPF. The first use case in this series is the "struct tcp_congestion_ops" which will be introduced in a latter patch. This patch introduces a new prog type BPF_PROG_TYPE_STRUCT_OPS. The BPF_PROG_TYPE_STRUCT_OPS prog is verified against a particular func ptr of a kernel struct. The attr->attach_btf_id is the btf id of a kernel struct. The attr->expected_attach_type is the member "index" of that kernel struct. The first member of a struct starts with member index 0. That will avoid ambiguity when a kernel struct has multiple func ptrs with the same func signature. For example, a BPF_PROG_TYPE_STRUCT_OPS prog is written to implement the "init" func ptr of the "struct tcp_congestion_ops". The attr->attach_btf_id is the btf id of the "struct tcp_congestion_ops" of the _running_ kernel. The attr->expected_attach_type is 3. The ctx of BPF_PROG_TYPE_STRUCT_OPS is an array of u64 args saved by arch_prepare_bpf_trampoline that will be done in the next patch when introducing BPF_MAP_TYPE_STRUCT_OPS. "struct bpf_struct_ops" is introduced as a common interface for the kernel struct that supports BPF_PROG_TYPE_STRUCT_OPS prog. The supporting kernel struct will need to implement an instance of the "struct bpf_struct_ops". The supporting kernel struct also needs to implement a bpf_verifier_ops. During BPF_PROG_LOAD, bpf_struct_ops_find() will find the right bpf_verifier_ops by searching the attr->attach_btf_id. A new "btf_struct_access" is also added to the bpf_verifier_ops such that the supporting kernel struct can optionally provide its own specific check on accessing the func arg (e.g. provide limited write access). After btf_vmlinux is parsed, the new bpf_struct_ops_init() is called to initialize some values (e.g. the btf id of the supporting kernel struct) and it can only be done once the btf_vmlinux is available. The R0 checks at BPF_EXIT is excluded for the BPF_PROG_TYPE_STRUCT_OPS prog if the return type of the prog->aux->attach_func_proto is "void". Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003503.3855825-1-kafai@fb.com |
||
|
Martin KaFai Lau
|
65726b5b7e |
bpf: Save PTR_TO_BTF_ID register state when spilling to stack
This patch makes the verifier save the PTR_TO_BTF_ID register state when spilling to the stack. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003454.3854870-1-kafai@fb.com |
||
|
Daniel Borkmann
|
6d4f151acf |
bpf: Fix passing modified ctx to ld/abs/ind instruction
Anatoly has been fuzzing with kBdysch harness and reported a KASAN slab oob in one of the outcomes: [...] [ 77.359642] BUG: KASAN: slab-out-of-bounds in bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.360463] Read of size 4 at addr ffff8880679bac68 by task bpf/406 [ 77.361119] [ 77.361289] CPU: 2 PID: 406 Comm: bpf Not tainted 5.5.0-rc2-xfstests-00157-g2187f215eba #1 [ 77.362134] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 77.362984] Call Trace: [ 77.363249] dump_stack+0x97/0xe0 [ 77.363603] print_address_description.constprop.0+0x1d/0x220 [ 77.364251] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.365030] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.365860] __kasan_report.cold+0x37/0x7b [ 77.366365] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.366940] kasan_report+0xe/0x20 [ 77.367295] bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.367821] ? bpf_skb_load_helper_8+0xf0/0xf0 [ 77.368278] ? mark_lock+0xa3/0x9b0 [ 77.368641] ? kvm_sched_clock_read+0x14/0x30 [ 77.369096] ? sched_clock+0x5/0x10 [ 77.369460] ? sched_clock_cpu+0x18/0x110 [ 77.369876] ? bpf_skb_load_helper_8+0xf0/0xf0 [ 77.370330] ___bpf_prog_run+0x16c0/0x28f0 [ 77.370755] __bpf_prog_run32+0x83/0xc0 [ 77.371153] ? __bpf_prog_run64+0xc0/0xc0 [ 77.371568] ? match_held_lock+0x1b/0x230 [ 77.371984] ? rcu_read_lock_held+0xa1/0xb0 [ 77.372416] ? rcu_is_watching+0x34/0x50 [ 77.372826] sk_filter_trim_cap+0x17c/0x4d0 [ 77.373259] ? sock_kzfree_s+0x40/0x40 [ 77.373648] ? __get_filter+0x150/0x150 [ 77.374059] ? skb_copy_datagram_from_iter+0x80/0x280 [ 77.374581] ? do_raw_spin_unlock+0xa5/0x140 [ 77.375025] unix_dgram_sendmsg+0x33a/0xa70 [ 77.375459] ? do_raw_spin_lock+0x1d0/0x1d0 [ 77.375893] ? unix_peer_get+0xa0/0xa0 [ 77.376287] ? __fget_light+0xa4/0xf0 [ 77.376670] __sys_sendto+0x265/0x280 [ 77.377056] ? __ia32_sys_getpeername+0x50/0x50 [ 77.377523] ? lock_downgrade+0x350/0x350 [ 77.377940] ? __sys_setsockopt+0x2a6/0x2c0 [ 77.378374] ? sock_read_iter+0x240/0x240 [ 77.378789] ? __sys_socketpair+0x22a/0x300 [ 77.379221] ? __ia32_sys_socket+0x50/0x50 [ 77.379649] ? mark_held_locks+0x1d/0x90 [ 77.380059] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 77.380536] __x64_sys_sendto+0x74/0x90 [ 77.380938] do_syscall_64+0x68/0x2a0 [ 77.381324] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 77.381878] RIP: 0033:0x44c070 [...] After further debugging, turns out while in case of other helper functions we disallow passing modified ctx, the special case of ld/abs/ind instruction which has similar semantics (except r6 being the ctx argument) is missing such check. Modified ctx is impossible here as bpf_skb_load_helper_8_no_cache() and others are expecting skb fields in original position, hence, add check_ctx_reg() to reject any modified ctx. Issue was first introduced back in |
||
|
Daniel Borkmann
|
f54c7898ed |
bpf: Fix precision tracking for unbounded scalars
Anatoly has been fuzzing with kBdysch harness and reported a hang in one of the outcomes. Upon closer analysis, it turns out that precise scalar value tracking is missing a few precision markings for unknown scalars: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (b7) r0 = 0 1: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0 1: (35) if r0 >= 0xf72e goto pc+0 --> only follow fallthrough 2: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0 2: (35) if r0 >= 0x80fe0000 goto pc+0 --> only follow fallthrough 3: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0 3: (14) w0 -= -536870912 4: R0_w=invP536870912 R1=ctx(id=0,off=0,imm=0) R10=fp0 4: (0f) r1 += r0 5: R0_w=invP536870912 R1_w=inv(id=0) R10=fp0 5: (55) if r1 != 0x104c1500 goto pc+0 --> push other branch for later analysis R0_w=invP536870912 R1_w=inv273421568 R10=fp0 6: R0_w=invP536870912 R1_w=inv273421568 R10=fp0 6: (b7) r0 = 0 7: R0=invP0 R1=inv273421568 R10=fp0 7: (76) if w1 s>= 0xffffff00 goto pc+3 --> only follow goto 11: R0=invP0 R1=inv273421568 R10=fp0 11: (95) exit 6: R0_w=invP536870912 R1_w=inv(id=0) R10=fp0 6: (b7) r0 = 0 propagating r0 7: safe processed 11 insns [...] In the analysis of the second path coming after the successful exit above, the path is being pruned at line 7. Pruning analysis found that both r0 are precise P0 and both R1 are non-precise scalars and given prior path with R1 as non-precise scalar succeeded, this one is therefore safe as well. However, problem is that given condition at insn 7 in the first run, we only followed goto and didn't push the other branch for later analysis, we've never walked the few insns in there and therefore dead-code sanitation rewrites it as goto pc-1, causing the hang depending on the skb address hitting these conditions. The issue is that R1 should have been marked as precise as well such that pruning enforces range check and conluded that new R1 is not in range of old R1. In insn 4, we mark R1 (skb) as unknown scalar via __mark_reg_unbounded() but not mark_reg_unbounded() and therefore regs->precise remains as false. Back in |
||
|
Daniel Borkmann
|
cc52d9140a |
bpf: Fix record_func_key to perform backtracking on r3
While testing Cilium with /unreleased/ Linus' tree under BPF-based NodePort
implementation, I noticed a strange BPF SNAT engine behavior from time to
time. In some cases it would do the correct SNAT/DNAT service translation,
but at a random point in time it would just stop and perform an unexpected
translation after SYN, SYN/ACK and stack would send a RST back. While initially
assuming that there is some sort of a race condition in BPF code, adding
trace_printk()s for debugging purposes at some point seemed to have resolved
the issue auto-magically.
Digging deeper on this Heisenbug and reducing the trace_printk() calls to
an absolute minimum, it turns out that a single call would suffice to
trigger / not trigger the seen RST issue, even though the logic of the
program itself remains unchanged. Turns out the single call changed verifier
pruning behavior to get everything to work. Reconstructing a minimal test
case, the incorrect JIT dump looked as follows:
# bpftool p d j i 11346
0xffffffffc0cba96c:
[...]
21: movzbq 0x30(%rdi),%rax
26: cmp $0xd,%rax
2a: je 0x000000000000003a
2c: xor %edx,%edx
2e: movabs $0xffff89cc74e85800,%rsi
38: jmp 0x0000000000000049
3a: mov $0x2,%edx
3f: movabs $0xffff89cc74e85800,%rsi
49: mov -0x224(%rbp),%eax
4f: cmp $0x20,%eax
52: ja 0x0000000000000062
54: add $0x1,%eax
57: mov %eax,-0x224(%rbp)
5d: jmpq 0xffffffffffff6911
62: mov $0x1,%eax
[...]
Hence, unexpectedly, JIT emitted a direct jump even though retpoline based
one would have been needed since in line 2c and 3a we have different slot
keys in BPF reg r3. Verifier log of the test case reveals what happened:
0: (b7) r0 = 14
1: (73) *(u8 *)(r1 +48) = r0
2: (71) r0 = *(u8 *)(r1 +48)
3: (15) if r0 == 0xd goto pc+4
R0_w=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=ctx(id=0,off=0,imm=0) R10=fp0
4: (b7) r3 = 0
5: (18) r2 = 0xffff89cc74d54a00
7: (05) goto pc+3
11: (85) call bpf_tail_call#12
12: (b7) r0 = 1
13: (95) exit
from 3 to 8: R0_w=inv13 R1=ctx(id=0,off=0,imm=0) R10=fp0
8: (b7) r3 = 2
9: (18) r2 = 0xffff89cc74d54a00
11: safe
processed 13 insns (limit 1000000) [...]
Second branch is pruned by verifier since considered safe, but issue is that
record_func_key() couldn't have seen the index in line 3a and therefore
decided that emitting a direct jump at this location was okay.
Fix this by reusing our backtracking logic for precise scalar verification
in order to prevent pruning on the slot key. This means verifier will track
content of r3 all the way backwards and only prune if both scalars were
unknown in state equivalence check and therefore poisoned in the first place
in record_func_key(). The range is [x,x] in record_func_key() case since
the slot always would have to be constant immediate. Correct verification
after fix:
0: (b7) r0 = 14
1: (73) *(u8 *)(r1 +48) = r0
2: (71) r0 = *(u8 *)(r1 +48)
3: (15) if r0 == 0xd goto pc+4
R0_w=invP(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=ctx(id=0,off=0,imm=0) R10=fp0
4: (b7) r3 = 0
5: (18) r2 = 0x0
7: (05) goto pc+3
11: (85) call bpf_tail_call#12
12: (b7) r0 = 1
13: (95) exit
from 3 to 8: R0_w=invP13 R1=ctx(id=0,off=0,imm=0) R10=fp0
8: (b7) r3 = 2
9: (18) r2 = 0x0
11: (85) call bpf_tail_call#12
12: (b7) r0 = 1
13: (95) exit
processed 15 insns (limit 1000000) [...]
And correct corresponding JIT dump:
# bpftool p d j i 11
0xffffffffc0dc34c4:
[...]
21: movzbq 0x30(%rdi),%rax
26: cmp $0xd,%rax
2a: je 0x000000000000003a
2c: xor %edx,%edx
2e: movabs $0xffff9928b4c02200,%rsi
38: jmp 0x0000000000000049
3a: mov $0x2,%edx
3f: movabs $0xffff9928b4c02200,%rsi
49: cmp $0x4,%rdx
4d: jae 0x0000000000000093
4f: and $0x3,%edx
52: mov %edx,%edx
54: cmp %edx,0x24(%rsi)
57: jbe 0x0000000000000093
59: mov -0x224(%rbp),%eax
5f: cmp $0x20,%eax
62: ja 0x0000000000000093
64: add $0x1,%eax
67: mov %eax,-0x224(%rbp)
6d: mov 0x110(%rsi,%rdx,8),%rax
75: test %rax,%rax
78: je 0x0000000000000093
7a: mov 0x30(%rax),%rax
7e: add $0x19,%rax
82: callq 0x000000000000008e
87: pause
89: lfence
8c: jmp 0x0000000000000087
8e: mov %rax,(%rsp)
92: retq
93: mov $0x1,%eax
[...]
Also explicitly adding explicit env->allow_ptr_leaks to fixup_bpf_calls() since
backtracking is enabled under former (direct jumps as well, but use different
test). In case of only tracking different map pointers as in
|
||
|
Daniel Borkmann
|
e47304232b |
bpf: Fix cgroup local storage prog tracking
Recently noticed that we're tracking programs related to local storage maps
through their prog pointer. This is a wrong assumption since the prog pointer
can still change throughout the verification process, for example, whenever
bpf_patch_insn_single() is called.
Therefore, the prog pointer that was assigned via bpf_cgroup_storage_assign()
is not guaranteed to be the same as we pass in bpf_cgroup_storage_release()
and the map would therefore remain in busy state forever. Fix this by using
the prog's aux pointer which is stable throughout verification and beyond.
Fixes:
|
||
|
Daniel Borkmann
|
a2ea07465c |
bpf: Fix missing prog untrack in release_maps
Commit |
||
|
Yonghong Song
|
e9eeec58c9 |
bpf: Fix a bug when getting subprog 0 jited image in check_attach_btf_id
For jited bpf program, if the subprogram count is 1, i.e.,
there is no callees in the program, prog->aux->func will be NULL
and prog->bpf_func points to image address of the program.
If there is more than one subprogram, prog->aux->func is populated,
and subprogram 0 can be accessed through either prog->bpf_func or
prog->aux->func[0]. Other subprograms should be accessed through
prog->aux->func[subprog_id].
This patch fixed a bug in check_attach_btf_id(), where
prog->aux->func[subprog_id] is used to access any subprogram which
caused a segfault like below:
[79162.619208] BUG: kernel NULL pointer dereference, address:
0000000000000000
......
[79162.634255] Call Trace:
[79162.634974] ? _cond_resched+0x15/0x30
[79162.635686] ? kmem_cache_alloc_trace+0x162/0x220
[79162.636398] ? selinux_bpf_prog_alloc+0x1f/0x60
[79162.637111] bpf_prog_load+0x3de/0x690
[79162.637809] __do_sys_bpf+0x105/0x1740
[79162.638488] do_syscall_64+0x5b/0x180
[79162.639147] entry_SYSCALL_64_after_hwframe+0x44/0xa9
......
Fixes:
|
||
|
Daniel Borkmann
|
d2e4c1e6c2 |
bpf: Constant map key tracking for prog array pokes
Add tracking of constant keys into tail call maps. The signature of bpf_tail_call_proto is that arg1 is ctx, arg2 map pointer and arg3 is a index key. The direct call approach for tail calls can be enabled if the verifier asserted that for all branches leading to the tail call helper invocation, the map pointer and index key were both constant and the same. Tracking of map pointers we already do from prior work via |
||
|
Yonghong Song
|
581738a681 |
bpf: Provide better register bounds after jmp32 instructions
With latest llvm (trunk https://github.com/llvm/llvm-project), test_progs, which has +alu32 enabled, failed for strobemeta.o. The verifier output looks like below with edit to replace large decimal numbers with hex ones. 193: (85) call bpf_probe_read_user_str#114 R0=inv(id=0) 194: (26) if w0 > 0x1 goto pc+4 R0_w=inv(id=0,umax_value=0xffffffff00000001) 195: (6b) *(u16 *)(r7 +80) = r0 196: (bc) w6 = w0 R6_w=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0xffffffff)) 197: (67) r6 <<= 32 R6_w=inv(id=0,smax_value=0x7fffffff00000000,umax_value=0xffffffff00000000, var_off=(0x0; 0xffffffff00000000)) 198: (77) r6 >>= 32 R6=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0xffffffff)) ... 201: (79) r8 = *(u64 *)(r10 -416) R8_w=map_value(id=0,off=40,ks=4,vs=13872,imm=0) 202: (0f) r8 += r6 R8_w=map_value(id=0,off=40,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff)) 203: (07) r8 += 9696 R8_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff)) ... 255: (bf) r1 = r8 R1_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff)) ... 257: (85) call bpf_probe_read_user_str#114 R1 unbounded memory access, make sure to bounds check any array access into a map The value range for register r6 at insn 198 should be really just 0/1. The umax_value=0xffffffff caused later verification failure. After jmp instructions, the current verifier already tried to use just obtained information to get better register range. The current mechanism is for 64bit register only. This patch implemented to tighten the range for 32bit sub-registers after jmp32 instructions. With the patch, we have the below range ranges for the above code sequence: 193: (85) call bpf_probe_read_user_str#114 R0=inv(id=0) 194: (26) if w0 > 0x1 goto pc+4 R0_w=inv(id=0,smax_value=0x7fffffff00000001,umax_value=0xffffffff00000001, var_off=(0x0; 0xffffffff00000001)) 195: (6b) *(u16 *)(r7 +80) = r0 196: (bc) w6 = w0 R6_w=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0x1)) 197: (67) r6 <<= 32 R6_w=inv(id=0,umax_value=0x100000000,var_off=(0x0; 0x100000000)) 198: (77) r6 >>= 32 R6=inv(id=0,umax_value=1,var_off=(0x0; 0x1)) ... 201: (79) r8 = *(u64 *)(r10 -416) R8_w=map_value(id=0,off=40,ks=4,vs=13872,imm=0) 202: (0f) r8 += r6 R8_w=map_value(id=0,off=40,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1)) 203: (07) r8 += 9696 R8_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1)) ... 255: (bf) r1 = r8 R1_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1)) ... 257: (85) call bpf_probe_read_user_str#114 ... At insn 194, the register R0 has better var_off.mask and smax_value. Especially, the var_off.mask ensures later lshift and rshift maintains proper value range. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191121170650.449030-1-yhs@fb.com |
||
|
Andrii Nakryiko
|
1e0bd5a091 |
bpf: Switch bpf_map ref counter to atomic64_t so bpf_map_inc() never fails
|
||
|
Alexei Starovoitov
|
5b92a28aae |
bpf: Support attaching tracing BPF program to other BPF programs
Allow FENTRY/FEXIT BPF programs to attach to other BPF programs of any type including their subprograms. This feature allows snooping on input and output packets in XDP, TC programs including their return values. In order to do that the verifier needs to track types not only of vmlinux, but types of other BPF programs as well. The verifier also needs to translate uapi/linux/bpf.h types used by networking programs into kernel internal BTF types used by FENTRY/FEXIT BPF programs. In some cases LLVM optimizations can remove arguments from BPF subprograms without adjusting BTF info that LLVM backend knows. When BTF info disagrees with actual types that the verifiers sees the BPF trampoline has to fallback to conservative and treat all arguments as u64. The FENTRY/FEXIT program can still attach to such subprograms, but it won't be able to recognize pointer types like 'struct sk_buff *' and it won't be able to pass them to bpf_skb_output() for dumping packets to user space. The FENTRY/FEXIT program would need to use bpf_probe_read_kernel() instead. The BPF_PROG_LOAD command is extended with attach_prog_fd field. When it's set to zero the attach_btf_id is one vmlinux BTF type ids. When attach_prog_fd points to previously loaded BPF program the attach_btf_id is BTF type id of main function or one of its subprograms. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-18-ast@kernel.org |
||
|
Alexei Starovoitov
|
8c1b6e69dc |
bpf: Compare BTF types of functions arguments with actual types
Make the verifier check that BTF types of function arguments match actual types passed into top-level BPF program and into BPF-to-BPF calls. If types match such BPF programs and sub-programs will have full support of BPF trampoline. If types mismatch the trampoline has to be conservative. It has to save/restore five program arguments and assume 64-bit scalars. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-17-ast@kernel.org |
||
|
Alexei Starovoitov
|
91cc1a9974 |
bpf: Annotate context types
Annotate BPF program context types with program-side type and kernel-side type.
This type information is used by the verifier. btf_get_prog_ctx_type() is
used in the later patches to verify that BTF type of ctx in BPF program matches to
kernel expected ctx type. For example, the XDP program type is:
BPF_PROG_TYPE(BPF_PROG_TYPE_XDP, xdp, struct xdp_md, struct xdp_buff)
That means that XDP program should be written as:
int xdp_prog(struct xdp_md *ctx) { ... }
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-16-ast@kernel.org
|
||
|
Alexei Starovoitov
|
9cc31b3a09 |
bpf: Fix race in btf_resolve_helper_id()
btf_resolve_helper_id() caching logic is a bit racy, since under root the
verifier can verify several programs in parallel. Fix it with READ/WRITE_ONCE.
Fix the type as well, since error is also recorded.
Fixes:
|
||
|
Alexei Starovoitov
|
fec56f5890 |
bpf: Introduce BPF trampoline
Introduce BPF trampoline concept to allow kernel code to call into BPF programs with practically zero overhead. The trampoline generation logic is architecture dependent. It's converting native calling convention into BPF calling convention. BPF ISA is 64-bit (even on 32-bit architectures). The registers R1 to R5 are used to pass arguments into BPF functions. The main BPF program accepts only single argument "ctx" in R1. Whereas CPU native calling convention is different. x86-64 is passing first 6 arguments in registers and the rest on the stack. x86-32 is passing first 3 arguments in registers. sparc64 is passing first 6 in registers. And so on. The trampolines between BPF and kernel already exist. BPF_CALL_x macros in include/linux/filter.h statically compile trampolines from BPF into kernel helpers. They convert up to five u64 arguments into kernel C pointers and integers. On 64-bit architectures this BPF_to_kernel trampolines are nops. On 32-bit architecture they're meaningful. The opposite job kernel_to_BPF trampolines is done by CAST_TO_U64 macros and __bpf_trace_##call() shim functions in include/trace/bpf_probe.h. They convert kernel function arguments into array of u64s that BPF program consumes via R1=ctx pointer. This patch set is doing the same job as __bpf_trace_##call() static trampolines, but dynamically for any kernel function. There are ~22k global kernel functions that are attachable via nop at function entry. The function arguments and types are described in BTF. The job of btf_distill_func_proto() function is to extract useful information from BTF into "function model" that architecture dependent trampoline generators will use to generate assembly code to cast kernel function arguments into array of u64s. For example the kernel function eth_type_trans has two pointers. They will be casted to u64 and stored into stack of generated trampoline. The pointer to that stack space will be passed into BPF program in R1. On x86-64 such generated trampoline will consume 16 bytes of stack and two stores of %rdi and %rsi into stack. The verifier will make sure that only two u64 are accessed read-only by BPF program. The verifier will also recognize the precise type of the pointers being accessed and will not allow typecasting of the pointer to a different type within BPF program. The tracing use case in the datacenter demonstrated that certain key kernel functions have (like tcp_retransmit_skb) have 2 or more kprobes that are always active. Other functions have both kprobe and kretprobe. So it is essential to keep both kernel code and BPF programs executing at maximum speed. Hence generated BPF trampoline is re-generated every time new program is attached or detached to maintain maximum performance. To avoid the high cost of retpoline the attached BPF programs are called directly. __bpf_prog_enter/exit() are used to support per-program execution stats. In the future this logic will be optimized further by adding support for bpf_stats_enabled_key inside generated assembly code. Introduction of preemptible and sleepable BPF programs will completely remove the need to call to __bpf_prog_enter/exit(). Detach of a BPF program from the trampoline should not fail. To avoid memory allocation in detach path the half of the page is used as a reserve and flipped after each attach/detach. 2k bytes is enough to call 40+ BPF programs directly which is enough for BPF tracing use cases. This limit can be increased in the future. BPF_TRACE_FENTRY programs have access to raw kernel function arguments while BPF_TRACE_FEXIT programs have access to kernel return value as well. Often kprobe BPF program remembers function arguments in a map while kretprobe fetches arguments from a map and analyzes them together with return value. BPF_TRACE_FEXIT accelerates this typical use case. Recursion prevention for kprobe BPF programs is done via per-cpu bpf_prog_active counter. In practice that turned out to be a mistake. It caused programs to randomly skip execution. The tracing tools missed results they were looking for. Hence BPF trampoline doesn't provide builtin recursion prevention. It's a job of BPF program itself and will be addressed in the follow up patches. BPF trampoline is intended to be used beyond tracing and fentry/fexit use cases in the future. For example to remove retpoline cost from XDP programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-5-ast@kernel.org |
||
|
Alexei Starovoitov
|
f1b9509c2f |
bpf: Replace prog_raw_tp+btf_id with prog_tracing
The bpf program type raw_tp together with 'expected_attach_type' was the most appropriate api to indicate BTF-enabled raw_tp programs. But during development it became apparent that 'expected_attach_type' cannot be used and new 'attach_btf_id' field had to be introduced. Which means that the information is duplicated in two fields where one of them is ignored. Clean it up by introducing new program type where both 'expected_attach_type' and 'attach_btf_id' fields have specific meaning. In the future 'expected_attach_type' will be extended with other attach points that have similar semantics to raw_tp. This patch is replacing BTF-enabled BPF_PROG_TYPE_RAW_TRACEPOINT with prog_type = BPF_RPOG_TYPE_TRACING expected_attach_type = BPF_TRACE_RAW_TP attach_btf_id = btf_id of raw tracepoint inside the kernel Future patches will add expected_attach_type = BPF_TRACE_FENTRY or BPF_TRACE_FEXIT where programs have the same input context and the same helpers, but different attach points. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191030223212.953010-2-ast@kernel.org |
||
|
Alexei Starovoitov
|
15ab09bdca |
bpf: Enforce 'return 0' in BTF-enabled raw_tp programs
The return value of raw_tp programs is ignored by __bpf_trace_run() that calls them. The verifier also allows any value to be returned. For BTF-enabled raw_tp lets enforce 'return 0', so that return value can be used for something in the future. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191029032426.1206762-1-ast@kernel.org |
||
|
Martin KaFai Lau
|
3820729160 |
bpf: Prepare btf_ctx_access for non raw_tp use case
This patch makes a few changes to btf_ctx_access() to prepare it for non raw_tp use case where the attach_btf_id is not necessary a BTF_KIND_TYPEDEF. It moves the "btf_trace_" prefix check and typedef-follow logic to a new function "check_attach_btf_id()" which is called only once during bpf_check(). btf_ctx_access() only operates on a BTF_KIND_FUNC_PROTO type now. That should also be more efficient since it is done only one instead of every-time check_ctx_access() is called. "check_attach_btf_id()" needs to find the func_proto type from the attach_btf_id. It needs to store the result into the newly added prog->aux->attach_func_proto. func_proto btf type has no name, so a proper name should be stored into "attach_func_name" also. v2: - Move the "btf_trace_" check to an earlier verifier phase (Alexei) Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191025001811.1718491-1-kafai@fb.com |
||
|
Alexei Starovoitov
|
a7658e1a41 |
bpf: Check types of arguments passed into helpers
Introduce new helper that reuses existing skb perf_event output implementation, but can be called from raw_tracepoint programs that receive 'struct sk_buff *' as tracepoint argument or can walk other kernel data structures to skb pointer. In order to do that teach verifier to resolve true C types of bpf helpers into in-kernel BTF ids. The type of kernel pointer passed by raw tracepoint into bpf program will be tracked by the verifier all the way until it's passed into helper function. For example: kfree_skb() kernel function calls trace_kfree_skb(skb, loc); bpf programs receives that skb pointer and may eventually pass it into bpf_skb_output() bpf helper which in-kernel is implemented via bpf_skb_event_output() kernel function. Its first argument in the kernel is 'struct sk_buff *'. The verifier makes sure that types match all the way. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-11-ast@kernel.org |
||
|
Alexei Starovoitov
|
3dec541b2e |
bpf: Add support for BTF pointers to x86 JIT
Pointer to BTF object is a pointer to kernel object or NULL. Such pointers can only be used by BPF_LDX instructions. The verifier changed their opcode from LDX|MEM|size to LDX|PROBE_MEM|size to make JITing easier. The number of entries in extable is the number of BPF_LDX insns that access kernel memory via "pointer to BTF type". Only these load instructions can fault. Since x86 extable is relative it has to be allocated in the same memory region as JITed code. Allocate it prior to last pass of JITing and let the last pass populate it. Pointer to extable in bpf_prog_aux is necessary to make page fault handling fast. Page fault handling is done in two steps: 1. bpf_prog_kallsyms_find() finds BPF program that page faulted. It's done by walking rb tree. 2. then extable for given bpf program is binary searched. This process is similar to how page faulting is done for kernel modules. The exception handler skips over faulting x86 instruction and initializes destination register with zero. This mimics exact behavior of bpf_probe_read (when probe_kernel_read faults dest is zeroed). JITs for other architectures can add support in similar way. Until then they will reject unknown opcode and fallback to interpreter. Since extable should be aligned and placed near JITed code make bpf_jit_binary_alloc() return 4 byte aligned image offset, so that extable aligning formula in bpf_int_jit_compile() doesn't need to rely on internal implementation of bpf_jit_binary_alloc(). On x86 gcc defaults to 16-byte alignment for regular kernel functions due to better performance. JITed code may be aligned to 16 in the future, but it will use 4 in the meantime. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-10-ast@kernel.org |
||
|
Alexei Starovoitov
|
2a02759ef5 |
bpf: Add support for BTF pointers to interpreter
Pointer to BTF object is a pointer to kernel object or NULL. The memory access in the interpreter has to be done via probe_kernel_read to avoid page faults. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-9-ast@kernel.org |
||
|
Alexei Starovoitov
|
9e15db6613 |
bpf: Implement accurate raw_tp context access via BTF
libbpf analyzes bpf C program, searches in-kernel BTF for given type name and stores it into expected_attach_type. The kernel verifier expects this btf_id to point to something like: typedef void (*btf_trace_kfree_skb)(void *, struct sk_buff *skb, void *loc); which represents signature of raw_tracepoint "kfree_skb". Then btf_ctx_access() matches ctx+0 access in bpf program with 'skb' and 'ctx+8' access with 'loc' arguments of "kfree_skb" tracepoint. In first case it passes btf_id of 'struct sk_buff *' back to the verifier core and 'void *' in second case. Then the verifier tracks PTR_TO_BTF_ID as any other pointer type. Like PTR_TO_SOCKET points to 'struct bpf_sock', PTR_TO_TCP_SOCK points to 'struct bpf_tcp_sock', and so on. PTR_TO_BTF_ID points to in-kernel structs. If 1234 is btf_id of 'struct sk_buff' in vmlinux's BTF then PTR_TO_BTF_ID#1234 points to one of in kernel skbs. When PTR_TO_BTF_ID#1234 is dereferenced (like r2 = *(u64 *)r1 + 32) the btf_struct_access() checks which field of 'struct sk_buff' is at offset 32. Checks that size of access matches type definition of the field and continues to track the dereferenced type. If that field was a pointer to 'struct net_device' the r2's type will be PTR_TO_BTF_ID#456. Where 456 is btf_id of 'struct net_device' in vmlinux's BTF. Such verifier analysis prevents "cheating" in BPF C program. The program cannot cast arbitrary pointer to 'struct sk_buff *' and access it. C compiler would allow type cast, of course, but the verifier will notice type mismatch based on BPF assembly and in-kernel BTF. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-7-ast@kernel.org |
||
|
Alexei Starovoitov
|
8580ac9404 |
bpf: Process in-kernel BTF
If in-kernel BTF exists parse it and prepare 'struct btf *btf_vmlinux' for further use by the verifier. In-kernel BTF is trusted just like kallsyms and other build artifacts embedded into vmlinux. Yet run this BTF image through BTF verifier to make sure that it is valid and it wasn't mangled during the build. If in-kernel BTF is incorrect it means either gcc or pahole or kernel are buggy. In such case disallow loading BPF programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191016032505.2089704-4-ast@kernel.org |
||
|
Andrii Nakryiko
|
2dedd7d216 |
bpf: Fix cast to pointer from integer of different size warning
Fix "warning: cast to pointer from integer of different size" when
casting u64 addr to void *.
Fixes:
|