orderly_poweroff cannot be called from atomic context.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Current uninitialized sensor detection does not work for me on nv4b and
sensor returns crazy values (>190°C). It stabilises later, but it's too
late - therm code shutdowns the machine...
Let's just reset it on init.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
+ the same for shutdown threshold - seems impossible, but shutdown can fail.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes "BUG: spinlock bad magic" on module load for nva3+ cards.
Introduced in commit "drm/nouveau/therm: implement support for temperature
alarms".
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
the variable chan is dereferenced in line 190, so it is no reason to check
null again in line 198.
Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It's safe to call kfree(NULL).
Found by smatch.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
fan->get returns int, but we write it to unsigned variable, and then check
whether it's >= 0 (it always is)
Found by smatch:
drivers/gpu/drm/nouveau/core/subdev/therm/fan.c:61 nouveau_fan_update() warn: always true condition '(duty >= 0) => (0-u32max >= 0)'
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
COPY_ZM_REG: destination and source addresses were swapped
RAM_RESTRICT_ZM_REG_GROUP: missing 0x prefix for register address
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We already rely on them having the same fields and layout.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This fixes a bug where, when temperature is outside of the linear range, fan
pwm would be outside of the allowed range ([0, 100]) and could get negative in
some cases.
It seems like a regression that happened when we re-worked the fan management
logic before merging.
Tested-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
- record channel owner process name
- add some helpers for accessing this information
- let nouveau_enum hold additional value (will be needed in the next patch)
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This should avoid the situation where a user gets its kernel logs flooded when
temperature oscillates around a threshold with 0°C hysteresis.
This patch is just meant to fix broken vbios (as reported on a nv4e on
sysfs hwmon interface.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Commit 767baf82 drm/nouveau: remove some more unnecessary legacy bios code
has introduced a regression my misplacing the code that sets the major/chip
versions, which are used whist parsing the bmp/bit structure in vbios
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
My GTX660 has the GPIO_FAN function, but it's configured in input-mode;
presumably to monitor the frequency set by an I2C fan controller?
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Expose all the hysteresis parameters + shutdown (emergency) +
fan_boost (fixed pwm trip point).
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For now, we only boost the fan speed to the maximum and auto-mode
when hitting the FAN_BOOST threshold and halt the computer when it
reaches the shutdown temperature. The downclock and critical thresholds
do nothing.
On nv43:50 and nva3+, temperature is polled because of the limited hardware.
I'll improve the nva3+ situation by implementing alarm management in PDAEMON
whenever I can but polling once every second shouldn't be such a problem.
v2 (Ben Skeggs):
- rebased
v3: fixed false-detections and threshold reprogrammation handling on nv50:nvc0
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
We are going to use PTHERM's IRQs for thermal monitoring but we need to route
them first.
On nv31-50, PBUS's IRQ line is shared with GPIOs IRQs.
It seems like nv10-31 GPIO interruptions aren't well handled. I kept the
original behaviour but it is wrong and may lead to an IRQ storm.
Since we enable all PBUS IRQs, we need a way to avoid being stormed if we
don't handle them. The solution I used was to mask the IRQs that have not been
handled. This will also print one message in the logs to let us know.
v2: drop the shared intr handler because of was racy
v3: style fixes
v4: drop a useless construct in the chipset-dependent INTR
v5: add BUS to the disable mask
v6 (Ben Skeggs):
- general tidy to match the rest of the driver's style
- nva3->nvc0, nva3 can be serviced just fine with nv50.c, rnndb even notes
that the THERM_ALARM bit got left in the hw until fermi anyway.. so, it's
not going to conflict
- removed the peephole and user stuff, for the moment.. will handle them
later if we find a good reason to actually care..
- limited INTR_EN to just what we can handle for now, mostly to prevent
spam of unknown status bits (seen on at least nv4x)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
v2: improved design but drops safety monitoring (to be in a later patch)
v3: fix locking and mode management
v4: gently fallback to the no-control mode when temperature cannot be got
and use kernel-provided min/max macros
v5 (Ben Skeggs):
- rebased on my previous patches
v6: fix hysterisis management in trip-based auto fan management
This commit also forbids access to fan management to nvc0+ chipsets as
fan management is already taken care of my PDAEMON's default fw.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
v2 (Ben Skeggs):
- split from larger patch
- fixed to not require alarm resched patch
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
v2: change percent from int to atomic_t
v3: random fixes
v4 (Ben Skeggs):
- adapted for split-out fan-control "protocol" structure
- removed need for timer resched
- support for forcing 'toggle' control on PWM boards
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Mostly to allow for the possibility of testing 'toggle' fan control easily.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
This info will be used by two more implementations in upcoming commits.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=qtaF
-----END PGP SIGNATURE-----
Merge tag 'dm-3.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm
Pull more device-mapper fixes from Alasdair G Kergon:
"A fix for stacked dm thin devices and a fix for the new dm WRITE SAME
support."
* tag 'dm-3.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
dm: fix write same requests counting
dm thin: fix queue limits stacking
PullHID fixes from Jiri Kosina:
- fix i2c-hid and hidraw interaction, by Benjamin Tissoires
- a quirk to make a particular device (Formosa IR receiver) work
properly, by Nicholas Santos
* 'for-3.8/upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: i2c-hid: fix i2c_hid_output_raw_report
HID: usbhid: quirk for Formosa IR receiver
HID: remove x bit from sensor doc
