The Radix MMU translation tree as defined in ISA v3.0 contains two
different types of entry, directories and leaves. Leaves are
identified by _PAGE_PTE being set.
The formats of the two entries are different, with the directory
entries containing no spare bits for use by software. In particular
the bit we use for _PAGE_DEVMAP is not reserved for software, and is
part of the NLB (Next Level Base) field, essentially the address of
the next level in the tree.
Note that the Linux pte_t is not == _PAGE_PTE. A huge page pmd
entry (or devmap!) is also a leaf and so has _PAGE_PTE set, even
though we use a pmd_t for it in Linux.
The fix is to ensure that the pmd/pte_devmap() confirm they are
looking at a leaf entry (_PAGE_PTE) as well as checking _PAGE_DEVMAP.
Fixes: ebd3119793 ("powerpc/mm: Add devmap support for ppc64")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Add a comment in the code and flesh out change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The hardware spinlock drivers now depend on HWSPINLOCK (instead of
selecting it), so we need to explicitly enable it after commit
35fc8a07d7 ("Make HWSPINLOCK a menuconfig to ease disabling")
Without HWSPINLOCK, various drivers are left with unsatisfied
dependencies and Qcom boards using shared memory based communication
to request regulators are failing to boot and mount rootfs.
Fix this by explicitly enabling HWSPINLOCK in defconfig.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
-----BEGIN PGP SIGNATURE-----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=WLqQ
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.13-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"These iare the fixes for 4.13-rc3: vmwgfx, exynos, i915, amdgpu,
nouveau, host1x and displayport fixes.
As expected people woke up this week, i915 didn't do an -rc2 pull so
got a bumper -rc3 pull, and Ben resurfaced on nouveau and fixed a
bunch of major crashers seen on Fedora 26, and there are a few vmwgfx
fixes as well.
Otherwise exynos had some regression fixes/cleanups, and amdgpu has an
rcu locking regression fix and a couple of minor fixes"
* tag 'drm-fixes-for-v4.13-rc3' of git://people.freedesktop.org/~airlied/linux: (44 commits)
drm/i915: Fix bad comparison in skl_compute_plane_wm.
drm/i915: Force CPU synchronisation even if userspace requests ASYNC
drm/i915: Only skip updating execobject.offset after error
drm/i915: Only mark the execobject as pinned on success
drm/i915: Remove assertion from raw __i915_vma_unpin()
drm/i915/cnl: Fix loadgen select programming on ddi vswing sequence
drm/i915: Fix scaler init during CRTC HW state readout
drm/i915/selftests: Fix an error handling path in 'mock_gem_device()'
drm/i915: Unbreak gpu reset vs. modeset locking
gpu: host1x: Free the IOMMU domain when there is no device to attach
drm/i915: Fix cursor updates on some platforms
drm/i915: Fix user ptr check size in eb_relocate_vma()
drm: exynos: mark pm functions as __maybe_unused
drm/exynos: select CEC_CORE if CEC_NOTIFIER
drm/exynos/hdmi: fix disable sequence
drm/exynos: mic: add a bridge at probe
drm/exynos/dsi: Remove error handling for bridge_node DT parsing
drm/exynos: dsi: do not try to find bridge
drm: exynos: hdmi: make of_device_ids const.
drm: exynos: constify mixer_match_types and *_mxr_drv_data.
...
The driver attempts to 'select MDIO_DEVICE', but the code
is actually a loadable module when PHYLIB=m:
drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_mdiodev_phy_write':
phy-bcm-ns-usb3.c:(.text.bcm_ns_usb3_mdiodev_phy_write+0x28): undefined reference to `mdiobus_write'
drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_module_exit':
phy-bcm-ns-usb3.c:(.exit.text+0x18): undefined reference to `mdio_driver_unregister'
drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_module_init':
phy-bcm-ns-usb3.c:(.init.text+0x18): undefined reference to `mdio_driver_register'
phy-bcm-ns-usb3.c:(.init.text+0x38): undefined reference to `mdio_driver_unregister'
Using 'depends on MDIO_BUS' instead will avoid the link error.
Fixes: af850e14a7 ("phy: bcm-ns-usb3: add MDIO driver using proper bus layer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I still see build errors in randconfig builds and have had this
patch for a while to locally work around it:
drivers/built-in.o: In function `xgene_mdio_probe':
mux-core.c:(.text+0x352154): undefined reference to `of_mdiobus_register'
mux-core.c:(.text+0x352168): undefined reference to `mdiobus_free'
mux-core.c:(.text+0x3521c0): undefined reference to `mdiobus_alloc_size'
The idea is that CONFIG_MDIO_BUS now reflects whether the mdio_bus
code is built-in or a module, and other drivers that use the core
code can simply depend on that, instead of having a complex
dependency line.
Fixes: 90eff9096c ("net: phy: Allow splitting MDIO bus/device support from PHYs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
i915 fixes for -rc3
Bit more than usual since we missed -rc2. 4x cc: stable, 2 gvt
patches, but all fairly minor stuff. Last minute rebase was to add a
few missing cc: stable, I did prep the pull this morning already and
made sure CI approves.
* tag 'drm-intel-fixes-2017-07-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Fix bad comparison in skl_compute_plane_wm.
drm/i915: Force CPU synchronisation even if userspace requests ASYNC
drm/i915: Only skip updating execobject.offset after error
drm/i915: Only mark the execobject as pinned on success
drm/i915: Remove assertion from raw __i915_vma_unpin()
drm/i915/cnl: Fix loadgen select programming on ddi vswing sequence
drm/i915: Fix scaler init during CRTC HW state readout
drm/i915/selftests: Fix an error handling path in 'mock_gem_device()'
drm/i915: Unbreak gpu reset vs. modeset locking
drm/i915: Fix cursor updates on some platforms
drm/i915: Fix user ptr check size in eb_relocate_vma()
drm/i915/gvt: Extend KBL platform support in GVT-g
drm/i915/gvt: Fix the vblank timer close issue after shutdown VMs in reverse
Core Changes:
- dp: A few fixes in drm_dp_downstream_debug() (Chris)
- rockchip: sanitize the Kconfig dependencies (fallout from EXTCON) (Arnd)
- host1x: Free the iommu domain when attach_device fails (Paul)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Kocialkowski <contact@paulk.fr>
* tag 'drm-misc-fixes-2017-07-27' of git://anongit.freedesktop.org/git/drm-misc:
gpu: host1x: Free the IOMMU domain when there is no device to attach
drm/rockchip: fix Kconfig dependencies
drm/dp: Don't trust drm_dp_downstream_id()
drm/dp: Fix read pointer for drm_dp_downsteam_debug()
- Add an ACPI module parameter to allow users to override the
new default behavior on some systems where the EC GPE is not
disabled during suspend-to-idle in case the EC on their systems
generates excessive wakeup events and they want to sacrifice
some functionality (like power button wakeups) for extra battery
life while suspended (Rafael Wysocki).
- Fix flushing of the outstanding EC work in the ACPI core
suspend-to-idle code (Rafael Wysocki).
- Add a missing include and fix a messed-up comment in the ACPI
NUMA code (Ross Zwisler).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=m4S0
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are two fixups for the suspend-to-idle handling in the ACPI
subsystem after recent changes in that area and two simple fixes of
the ACPI NUMA code.
Specifics:
- Add an ACPI module parameter to allow users to override the new
default behavior on some systems where the EC GPE is not disabled
during suspend-to-idle in case the EC on their systems generates
excessive wakeup events and they want to sacrifice some
functionality (like power button wakeups) for extra battery life
while suspended (Rafael Wysocki).
- Fix flushing of the outstanding EC work in the ACPI core
suspend-to-idle code (Rafael Wysocki).
- Add a missing include and fix a messed-up comment in the ACPI NUMA
code (Ross Zwisler)"
* tag 'acpi-4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: NUMA: Fix typo in the full name of SRAT
ACPI: NUMA: add missing include in acpi_numa.h
ACPI / PM / EC: Flush all EC work in acpi_freeze_sync()
ACPI / EC: Add parameter to force disable the GPE on suspend
Since commit a8636c8964 (PM / Runtime: Don't allow to suspend a
device with an active child) it is no longer permitted to set
RPM_SUSPENDED state for a device with active children unless
power.ignore_children is set.
Update the documentation to reflect this.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a description of the cpuinfo_cur_freq policy attribute in sysfs
to the cpufreq documentation under Documentation/admin-guide/pm/ as
it is missing after commit 2a0e492798 (cpufreq: User/admin
documentation update and consolidation) that overlooked it.
Fixes: 2a0e492798 (cpufreq: User/admin documentation update and consolidation)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
The ->get callback in the intel_pstate structure was mostly there
for the scaling_cur_freq sysfs attribute to work, but after commit
f8475cef90 (x86: use common aperfmperf_khz_on_cpu() to calculate
KHz using APERF/MPERF) that attribute uses arch_freq_get_on_cpu()
provided by the x86 arch code on all processors supported by
intel_pstate, so it doesn't need the ->get callback from the
driver any more.
Moreover, the very presence of the ->get callback in the intel_pstate
structure causes the cpuinfo_cur_freq attribute to be present when
intel_pstate operates in the active mode, which is bogus, because
the role of that attribute is to return the current CPU frequency
as seen by the hardware. For intel_pstate, though, this is just an
average frequency and not really current, but computed for the
previous sampling interval (the actual current frequency may be
way different at the point this value is obtained by reading from
cpuinfo_cur_freq), and after commit 82b4e03e01 (intel_pstate: skip
scheduler hook when in "performance" mode) the value in
cpuinfo_cur_freq may be stale or just 0, depending on the driver's
operation mode. In fact, however, on the hardware supported by
intel_pstate there is no way to read the current CPU frequency
from it, so the cpuinfo_cur_freq attribute should not be present
at all when this driver is in use.
For this reason, drop intel_pstate_get() and clear the ->get
callback pointer pointing to it, so that the cpuinfo_cur_freq is
not present for intel_pstate in the active mode any more.
Fixes: 82b4e03e01 (intel_pstate: skip scheduler hook when in "performance" mode)
Reported-by: Huaisheng Ye <yehs1@lenovo.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
* acpi-pm:
ACPI / PM / EC: Flush all EC work in acpi_freeze_sync()
ACPI / EC: Add parameter to force disable the GPE on suspend
* acpi-numa:
ACPI: NUMA: Fix typo in the full name of SRAT
ACPI: NUMA: add missing include in acpi_numa.h
We get a link error trying to access the w100fb_gpio_read/write
functions from the platform when the driver is a loadable module
or not built-in, so the platform already uses 'select' to hard-enable
the driver.
However, that fails if the framebuffer subsystem is disabled
altogether.
I've considered various ways to fix this properly, but they
all seem like too much work or too risky, so this simply
adds another 'select' to force the subsystem on as well.
Fixes: 82427de2c7 ("ARM: pxa: PXA_ESERIES depends on FB_W100.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
An empty macro definition can cause unexpected behavior, in
case of the ixp4xx ioport_unmap, we get two warnings:
drivers/net/wireless/marvell/libertas/if_cs.c: In function 'if_cs_release':
drivers/net/wireless/marvell/libertas/if_cs.c:826:3: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
ioport_unmap(card->iobase);
drivers/vfio/pci/vfio_pci_rdwr.c: In function 'vfio_pci_vga_rw':
drivers/vfio/pci/vfio_pci_rdwr.c:230:15: error: the omitted middle operand in ?: will always be 'true', suggest explicit middle operand [-Werror=parentheses]
is_ioport ? ioport_unmap(iomem) : iounmap(iomem);
This uses an inline function to define the macro in a safer way.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
Just like ARCH_MULTIPLATFORM, we want to use ARM_PATCH_PHYS_VIRT
when possible, but that fails for NOMMU or XIP_KERNEL configurations.
Using 'imply' instead of 'select' gets this right and only uses
the symbol when we don't have to hardcode the address anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
This variable may be used by some devices that each have their
on Kconfig symbol, or by none of them, and that causes a build
warning:
arch/arm/mach-mmp/devices.c:241:12: error: 'usb_dma_mask' defined but not used [-Werror=unused-variable]
Marking it __maybe_unused avoids the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The omap_generic_init() and omap_hwmod_init_postsetup() functions are
used in the initialization for all OMAP2+ SoC types, but in the
extreme case that those are all disabled, we get a warning about
unused code:
arch/arm/mach-omap2/io.c:412:123: error: 'omap_hwmod_init_postsetup' defined but not used [-Werror=unused-function]
arch/arm/mach-omap2/board-generic.c:30:123: error: 'omap_generic_init' defined but not used [-Werror=unused-function]
This annotates both as __maybe_unused to shut up that warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The osk_mistral_init() contains code that is only compiled when
CONFIG_PM is set, but it uses a variable that is declared outside
of the #ifdef:
arch/arm/mach-omap1/board-osk.c: In function 'osk_mistral_init':
arch/arm/mach-omap1/board-osk.c:513:7: warning: unused variable 'ret' [-Wunused-variable]
This removes the #ifdef around the user of the variable,
make it always used.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
sirfsoc_init_late is called by each of the three individual
SoC definitions, but in a randconfig build, we can encounter
a situation where they are all disabled:
arch/arm/mach-prima2/common.c:18:123: warning: 'sirfsoc_init_late' defined but not used [-Wunused-function]
While that is not a useful configuration, the warning also
doesn't help, so this patch marks the function as __maybe_unused
to let the compiler know it is there intentionally.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ixp4xx defines the arguments to its __indirect_writesb() and other
functions as pointers to fixed-size data. This is not necessarily
wrong, and it works most of the time, but it causes warnings in
at least one driver:
drivers/net/ethernet/smsc/smc91x.c: In function 'smc_rcv':
drivers/net/ethernet/smsc/smc91x.c:495:21: error: passing argument 2 of '__indirect_readsw' from incompatible pointer type [-Werror=incompatible-pointer-types]
SMC_PULL_DATA(lp, data, packet_len - 4);
All other definitions of the same functions pass void pointers,
so doing the same here avoids the warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
The modem pm handler in the ams-delta board uses regulator_enable()
but does not check for a successful return code:
board-ams-delta.c:521:3: error: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Werror=unused-result]
It is not easy to propagate that return code to the callers in
uart_configure_port/uart_suspend_port/uart_resume_port, unless
we change all UART drivers, and it is unclear what those would
do with the return code.
Instead, this patch uses a runtime warning to replace the
compiletime warning. I have checked that the regulator in question
is hardcoded to a fixed-voltage GPIO regulator, and that should
never fail to get enabled if I understand the code right.
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Link: https://patchwork.kernel.org/patch/8391981/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The RAM_SIZE macro in mach/hardware.h conflicts with macros of
the same name in multiple drivers, leading to annoying build warnings:
In file included from drivers/net/ethernet/cirrus/cs89x0.c:79:0:
drivers/net/ethernet/cirrus/cs89x0.h:324:0: error: "RAM_SIZE" redefined [-Werror]
#define RAM_SIZE 0x1000 /* The card has 4k bytes or RAM */
^
In file included from /git/arm-soc/arch/arm/mach-rpc/include/mach/io.h:16:0,
from /git/arm-soc/arch/arm/include/asm/io.h:194,
from /git/arm-soc/include/linux/scatterlist.h:8,
from /git/arm-soc/include/linux/dmaengine.h:24,
from /git/arm-soc/include/linux/netdevice.h:38,
from /git/arm-soc/drivers/net/ethernet/cirrus/cs89x0.c:54:
arch/arm/mach-rpc/include/mach/hardware.h:28:0: note: this is the location of the previous definition
#define RAM_SIZE 0x10000000
We don't use RAM_SIZE/RAM_START at all, so we could just remove
them, but it might be nice to leave them for documentation purposes,
so this renames them to RPC_RAM_SIZE/RPC_RAM_START in order to
avoid the build warnings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
w90x900 still provides its own variant of the clk API rather than using
the generic COMMON_CLK API. This generally works, but it causes some link
errors with drivers using the clk_set_rate, clk_get_parent, clk_set_parent
or clk_round_rate functions when a platform lacks those interfaces.
This adds empty stub implementations for each of them, and I don't even
try to do something useful here but instead just print a WARN() message
to make it obvious what is going on if they ever end up being called.
The drivers that call these won't be used on these platforms (otherwise
we'd get a link error today), so the added code is harmless bloat and
will warn about accidental use.
A while ago there was a proposal to change w90x900 to use the common-clk
implementation, which would be the way it should be handled properly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It's a combination of the patch from Arnd Bergmann, which added empty stubs
for clk_round_rate() and clk_set_parent() and a working trivial
implementation of clk_get_parent(). The later is required for ADC driver.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ddb_allocation && ddb_allocation / blocks_per_line >= 1 is the same
as ddb_allocation >= blocks_per_line, so use the latter to simplify
this.
This fixes the following compiler warning:
drivers/gpu/drm/i915/intel_pm.c:4467]: (warning) Comparison of a
boolean expression with an integer other than 0 or 1.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: d555cb5827 ("drm/i915/skl+: use linetime latency if ddb size is not available")
Cc: "Mahesh Kumar" <mahesh1.kumar@intel.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
(cherry picked from commit 54d20ed1ff)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170717111355.4523-1-maarten.lankhorst@linux.intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The goal here was to minimise doing any thing or any check inside the
kernel that was not strictly required. For a userspace that assumes
complete control over the cache domains, the kernel is usually using
outdated information and may trigger clflushes where none were
required.
However, swapping is a situation where userspace has no knowledge of the
domain transfer, and will leave the object in the CPU cache. The kernel
must flush this out to the backing storage prior to use with the GPU. As
we use an asynchronous task tracked by an implicit fence for this, we
also need to cancel the ASYNC flag on the object so that the object will
wait for the clflush to complete before being executed. This also absolves
userspace of the responsibility imposed by commit 77ae995789 ("drm/i915:
Enable userspace to opt-out of implicit fencing") that its needed to ensure
that the object was out of the CPU cache prior to use on the GPU.
Fixes: 77ae995789 ("drm/i915: Enable userspace to opt-out of implicit fencing")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101571
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-5-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 0f46daa1a2)
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I was being overly paranoid in not updating the execobject.offset after
performing the fallback copy where we set reloc.presumed_offset to -1.
The thinking was to ensure that a subsequent NORELOC execbuf would be
forced to process the invalid relocations. However this is overkill so
long as we *only* update the execobject.offset following a successful
update of the relocation value witin the batch. If we have to repeat the
execbuf due to a later interruption, then we may skip the relocations on
the second pass (honouring NORELOC) since the execobject.offset match
the actual offsets (even though reloc.presumed_offset is garbage).
Subsequent calls to execbuf with NORELOC should themselves ensure that
the reloc.presumed_offset have been corrected in case of future
migration.
Reporting back the actual execobject.offset, even when
reloc.presumed_offset is garbage, ensures that reuse of those objects
use the latest information to avoid relocations.
Fixes: 2889caa923 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101635
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-4-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 1f727d9e72)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
After we detect a i915_vma pin overflow, we call __i915_vma_unpin to
cleanup. However, on an overflow the pin_count bitfield will be zero,
triggering an assertion, even though we the intention is to merely warn
and report the error back to the user (as historically the culprit has
be a leak in the display code).
Fixes: 20dfbde463 ("drm/i915: Wrap vma->pin_count accessors with small inline helpers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 67fddd902b)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The condition for setting the Loadgen Select bit of
PORT_TX_DW4 register during DDI Vswing Sequence should be
Bit rate <=6 GHz whereas the existing code checks only
Bit Rate < 6GHz. This patch fixes this condition.
While at it also remove the redundant paranthesis.
Fixes: cf54ca8bc5 ("drm/i915/cnl: Implement voltage swing sequence.")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500329122-32662-1-git-send-email-manasi.d.navare@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit a8e45a1c42)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The scaler allocation code depends on a non-zero default value for the
crtc scaler_id, so make sure we initialize the scaler state accordingly
even if the crtc is off. This fixes at least an initial YUV420 modeset
(added in a follow-up patchset by Shashank) when booting with the screen
off: after the initial HW readout and modeset which enables the scaler a
subsequent modeset will disable the scaler which isn't properly
allocated. This results in a funky HW state where the pipe scaler HW
registers can't be modified and the normally black screen is grey and
shifted to the right or jitters.
The problem was revealed by Shashank's YUV420 patchset and first
reported by Ville.
v2:
- In the stable tag also include versions which need backporting (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chandra Konduru <chandra.konduru@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # 4.2.x
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: a1b2278e4d ("drm/i915: skylake panel fitting using shared scalers")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170720112820.26816-1-imre.deak@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 5fb9dadf33)
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Goto the right label in case of error, otherwise there is a leak.
This has been introduced by c5cf9a9147. In this patch a goto has not been
updated.
Fixes: c5cf9a9147 ("drm/i915: Create a kmem_cache to allocate struct i915_priolist from")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719223503.30580-1-christophe.jaillet@wanadoo.fr
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit a5ec7fe81a)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Taking the modeset locks unconditionally isn't the greatest idea,
because atm that part is still broken and times out (and then atomic
keels over). And there's really no reason to do so, the old code
didn't do that either.
To make the patch a bit simpler let's also nuke 2 cases that are only
around for the old mmioflip paths. Atomic nonblocking workers will not
die (minus bugs) when a gpu reset happens.
And of course this doesn't fix any of the gpu reset vs. modeset
deadlock fun, but it at least stop modern CI machines from keeling
over all over the place for no reason at all.
And we still have the explicit testcases to run the fake gpu reset, so
coverage isn't that much worse.
v2: Split out additional changes on top, restrict this to purely reducing
the critical section of modeset locks.
v2: Review from Maarten
- update comments
- don't oops when state is NULL in intel_finish_reset, but try to at
least still drop locks properly. The hw is going to be toast anyway.
Fixes: 7397489399 ("drm/i915: Fix modeset handling during gpu reset, v5.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719125502.25696-3-daniel.vetter@ffwll.ch
(cherry picked from commit ce87ea15eb)
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull parisc fixes from Helge Deller:
- The majority of lines changed are due to regenerated defconfig files.
- The support for the Page Deallocation Table (PDT) which was merged in
the merge window for 4.13 contained a bug which crashes the kernel if
a bad page is reported by firmware. This is now fixed and the kernel
messages will show which memory slot holds the broken DIMM.
- Commit 3a166fc2d4 ("kbuild: handle libs-y archives separately from
built-in.o archives") broke linking the parisc kernel due to
millicode symbols which can't be reached then any longer. This was
fixed by modifying the parisc vmlinux.lds linker script.
- If the stack checker panics on stack overflow, avoid recursive
panics.
- Some parisc machines can't physically power off and thus instead
start after some time to flood the console by presumably detected
soft lockups. Avoid this by disabling the lockup detectors before
entering the endless for-next loop.
- Dave Anglin provided fixes which prevents TLB speculation on flushed
pages on PA8800/PA9000 CPUs.
- Arvind Yadav sent a trivial patch to constify the attribute_group
structure in our firmware on-board-flash storage driver
(pdc_stable.c)
* 'parisc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Extend disabled preemption in copy_user_page
parisc: Prevent TLB speculation on flushed pages on CPUs that only support equivalent aliases
parisc: Suspend lockup detectors before system halt
parisc: Show DIMM slot number which holds broken memory module
parisc: Add function to return DIMM slot of physical address
parisc: Fix crash when calling PDC_PAT_MEM PDT firmware function
parisc: regenerate defconfig files
parisc: pdc_stable: constify attribute_group structures.
parisc: Merge millicode routines via linker script
parisc: Disable further stack checks when panic occurs during stack check
Instead of fiddling with masking the event channels during suspend
and resume handling let do the irq subsystem do its job. It will do
the mask and unmask operations as needed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Remove unnecessary static on local variables last_frontswap_pages and
tgt_frontswap_pages. Such variables are initialized before being used,
on every execution path throughout the function. The statics have no
benefit and, removing them reduce the code size.
This issue was detected using Coccinelle and the following semantic patch:
@bad exists@
position p;
identifier x;
type T;
@@
static T x@p;
...
x = <+...x...+>
@@
identifier x;
expression e;
type T;
position p != bad.p;
@@
-static
T x@p;
... when != x
when strict
?x = e;
You can see a significant difference in the code size after executing
the size command, before and after the code change:
before:
text data bss dec hex filename
5633 3452 384 9469 24fd drivers/xen/xen-selfballoon.o
after:
text data bss dec hex filename
5576 3308 256 9140 23b4 drivers/xen/xen-selfballoon.o
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
On systems that are not booted as a Xen domain, the xenfs driver prints
the following message during boot.
[ 3.460595] xenfs: not registering filesystem on non-xen platform
As the user chose not to boot a Xen domain, this message does not
provide useful information. Drop this message.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
This is a pretty boring pull request, containing a few HD-audio
quirks and ID updates as usual suspects, as well as a fix for a
regression of FM801 chip on ia64 (what a legacy combination!)
-----BEGIN PGP SIGNATURE-----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=y0Ak
-----END PGP SIGNATURE-----
Merge tag 'sound-4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This is a pretty boring pull request, containing a few HD-audio quirks
and ID updates as usual suspects, as well as a fix for a regression of
FM801 chip on ia64 (what a legacy combination!)"
* tag 'sound-4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add mute led support for HP ProBook 440 G4
ALSA: hda/realtek - No loopback on ALC225/ALC295 codec
ALSA: hda/realtek - Update headset mode for ALC225
ALSA: fm801: Initialize chip after IRQ handler is registered
ALSA: hda/realtek - Update headset mode for ALC298
ALSA: hda - Add missing NVIDIA GPU codec IDs to patch table
Pull ARM fixes from Russell King:
"Two areas addressed by these fixes:
- Fixes from Dave Martin for the signal frames that were broken with
certain configurations. No one noticed until recently.
- More kexec fixes to ensure that the crashkernel region is correctly
allocated, and a fix for the location of the device tree when
several kexec kernels are loaded"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8687/1: signal: Fix unparseable iwmmxt_sigframe in uc_regspace[]
ARM: 8686/1: iwmmxt: Add missing __user annotations to sigframe accessors
ARM: kexec: fix failure to boot crash kernel
ARM: kexec: avoid allocating crashkernel region outside lowmem
Root complex integrated endpoints do not have a link and therefore may
use a smaller PCIe capability in config space than we expect when
building our config map. Add a case for these to avoid reporting an
erroneous overlap.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
posix_fallocate() will allocate space in an NFS file by considering
the last byte of every 4K block. If it is before EOF, it will read
the byte and if it is zero, a zero is written out. If it is after EOF,
the zero is unconditionally written.
For the blocks beyond EOF, if NFS believes its cache is valid, it will
expand these writes to write full pages, and then will merge the pages.
This results if (typically) 1MB writes. If NFS believes its cache is
not valid (particularly if NFS_INO_INVALID_DATA or
NFS_INO_REVAL_PAGECACHE are set - see nfs_write_pageuptodate()), it will
send the individual 1-byte writes. This results in (typically) 256 times
as many RPC requests, and can be substantially slower.
Currently nfs_revalidate_mapping() is only used when reading a file or
mmapping a file, as these are times when the content needs to be
up-to-date. Writes don't generally need the cache to be up-to-date, but
writes beyond EOF can benefit, particularly in the posix_fallocate()
case.
So this patch calls nfs_revalidate_mapping() when writing beyond EOF -
i.e. when there is a gap between the end of the file and the start of
the write. If the cache is thought to be out of date (as happens after
taking a file lock), this will cause a GETATTR, and the two flags
mentioned above will be cleared. With this, posix_fallocate() on a
newly locked file does not generate excessive tiny writes.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Prior to commit ca0daa277a ("NFS: Cache aggressively when file is open
for writing"), NFS would revalidate, or invalidate, the file size when
taking a lock. Since that commit it only invalidates the file content.
If the file size is changed on the server while wait for the lock, the
client will have an incorrect understanding of the file size and could
corrupt data. This particularly happens when writing beyond the
(supposed) end of file and can be easily be demonstrated with
posix_fallocate().
If an application opens an empty file, waits for a write lock, and then
calls posix_fallocate(), glibc will determine that the underlying
filesystem doesn't support fallocate (assuming version 4.1 or earlier)
and will write out a '0' byte at the end of each 4K page in the region
being fallocated that is after the end of the file.
NFS will (usually) detect that these writes are beyond EOF and will
expand them to cover the whole page, and then will merge the pages.
Consequently, NFS will write out large blocks of zeroes beyond where it
thought EOF was. If EOF had moved, the pre-existing part of the file
will be over-written. Locking should have protected against this,
but it doesn't.
This patch restores the use of nfs_zap_caches() which invalidated the
cached attributes. When posix_fallocate() asks for the file size, the
request will go to the server and get a correct answer.
cc: stable@vger.kernel.org (v4.8+)
Fixes: ca0daa277a ("NFS: Cache aggressively when file is open for writing")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When there is no device to attach to the IOMMU domain, as may be the
case when the device-tree does not contain the proper iommu node, it is
best to keep going without IOMMU support rather than failing.
This allows the driver to probe and function instead of taking down
all of the tegra drm driver, leading to missing display support.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Fixes: 404bfb78da ("gpu: host1x: Add IOMMU support")
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170710193305.5987-1-contact@paulk.fr
dwmmc host driver already deprecate it in the driver
but didn't modify the documentation to reflect the fact.
This patch deprecates it and clean up num-slots from the
examples of all variant host drivers.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Fixes: d30a8f7bdf ("mmc: dw_mmc: deprecated the "num-slots" property")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This got missed when we open sourced this.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Change to print the information about when the deprecated "num-slots" DT
binding is being used, as to avoid confusion when browsing the log:
dwmmc_rockchip fe320000.dwmmc: 'num-slots' was deprecated.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Fixes: d30a8f7bdf ("mmc: dw_mmc: deprecated the "num-slots" property")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When adding ethtool steering rule with action DISCARD we wrongly
pass a NULL dest with dest_num 1 to mlx5_add_flow_rules().
What this error seems to have caused is sending VPORT 0
(MLX5_FLOW_DESTINATION_TYPE_VPORT) as the fte dest instead of no dests.
We have fte action correctly set to DROP so it might been ignored
anyways.
To reproduce use:
# sudo ethtool --config-nfc <dev> flow-type ether \
dst aa:bb:cc:dd:ee:ff action -1
Fixes: 74491de937 ("net/mlx5: Add multi dest support")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
