mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
07255f2816
1440 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
c38dec7166 |
RTC for 4.5
Core: - fix module reference count in rtc-proc - Replace simple_strtoul by kstrtoul New driver: - Epson RX8010SJ Subsystem wide cleanups: - use %ph for short hex dumps - constify *_chip_ops structures Drivers: - abx80x: Microcrystal rv1805 support, alarm support - cmos: prevent kernel warning on IRQ flags mismatch - s5m: various cleanups - rv8803: rx8900 compatibility, small error path fix - sunxi: various cleanups - lpc32xx: remove irq > NR_IRQS check from probe() - imxdi: fix spelling mistake in warning message - ds1685: don't try to micromanage sysfs output size - da9063: avoid writing undefined data to rtc - gemini: Remove unnecessary platform_set_drvdata() - efi: add efi_procfs in efi_rtc_ops - pcf8523: refuse to write dates later than 2099 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCAAGBQJWnRQIAAoJEKbNnwlvZCyzb8kP/26N+iQNxQc1SjR4n/ZpJlBp aGcqyloPWcrpHPaAlQ7slo/TD0LLYdpYjCshiPnJjm4OLgA5+mba/ca5BgMAKOJM t0oXtLRVM7//TB+wLkpdHgM/OrwsTmYFMkB15G6YymsSB56Dc5YUxg4fIqCGcpIX j78AGyfwFinx7WzxMfGQSQIIz3Itym/s4Mc5HAjFikXuOPBQbd6RRZfj80gB/u4f k3XUsU8bOvQxqUa0SzgQTww90K11h4L5JYIjNh8dBvMbYcVX+xv6OFWfQYcVqrMa YYiAlznlOJ7O4puy7LSAFzc2Vm42NxqM9WHQ4VNcpRTiQ4nYgcreyPc5DhpY0Tc5 RdA2LmILEG6k+6b2d8yyGBEWOoXYVZyizelyCMkqJRixDXN4jow4Xc5qXDwP/bsX qQSQK7XFuvDTFFZ4hUqF2W/OWMWo2wIiaYaWY6EAQmh4iq3eFBQ+2yolSJn+1PEY mJqUyw7E7PNgPagbmfIVJ6g6Q6ZQ/J4G67feZTOFaEagbdFM5eP79HL6ZbtNYZce 4eqcmILvlUtmF0pzm0Ec8fhTIWL55GpPVuge6QkaIPFYq0lId8xiAuOX2L6G4oRf iAI6URijGwPWIHrCUx5dLGQgkxgauPdW5MpnuvSnxGWezGT2tCzLzV4ZHLyzayiX L8txbwQN0P1ykTJu1R0/ =xQhZ -----END PGP SIGNATURE----- Merge tag 'rtc-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Core: - fix module reference count in rtc-proc - Replace simple_strtoul by kstrtoul New driver: - Epson RX8010SJ Subsystem wide cleanups: - use %ph for short hex dumps - constify *_chip_ops structures Drivers: - abx80x: Microcrystal rv1805 support, alarm support - cmos: prevent kernel warning on IRQ flags mismatch - s5m: various cleanups - rv8803: rx8900 compatibility, small error path fix - sunxi: various cleanups - lpc32xx: remove irq > NR_IRQS check from probe() - imxdi: fix spelling mistake in warning message - ds1685: don't try to micromanage sysfs output size - da9063: avoid writing undefined data to rtc - gemini: Remove unnecessary platform_set_drvdata() - efi: add efi_procfs in efi_rtc_ops - pcf8523: refuse to write dates later than 2099" * tag 'rtc-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (24 commits) rtc: cmos: prevent kernel warning on IRQ flags mismatch rtc: rtc-ds2404: constify ds2404_chip_ops structures rtc: s5m: Make register configuration per S2MPS device to remove exceptions rtc: s5m: Add separate field for storing auto-cleared mask in register config rtc: s5m: Cleanup by removing useless 'rtc' prefix from fields rtc: Replace simple_strtoul by kstrtoul rtc: abx80x: add alarm support rtc: abx80x: Add Microcrystal rv1805 support rtc: v3020: constify v3020_chip_ops structures rtc: rv8803: Extend compatibility with the rx8900 rtc: rv8803: fix handling return value of i2c_smbus_read_byte_data rtc: Add Epson RX8010SJ RTC driver rtc: lpc32xx: remove irq > NR_IRQS check from probe() rtc: imxdi: fix spelling mistake in warning message rtc: ds1685: don't try to micromanage sysfs output size rtc: use %ph for short hex dumps rtc: da9063: avoid writing undefined data to rtc rtc: sunxi: use of_device_get_match_data rtc: sunxi: constify the data_year_param structure rtc: sunxi: fix signedness issues ... |
||
|
Linus Torvalds
|
4b43ea2a7c |
regulator: Update for v4.5
Aside from a fix for a spurious warning (which caused more problems than it fixed in the fixing really) this is all driver updates, including new drivers for Dialog PV88060/90 and TI LM363x and TPS65086 devices. The qcom_smd driver has had PM8916 and PMA8084 support added. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJWlUWiAAoJECTWi3JdVIfQtywH/0joibyUbL34arXcPNCUUhlo UnhTgT1kfOoS01ODt9gU49X4/8SRL9HdjcrIV8yTz4Ldb8by8Rd3ZrkO//9zs7BF 5PIqIzEw6FT/Ovsj8Tc35irccMSrwtTIGRrA8zrM/WtWQWcIUWFxMw+j/lewIvvH jHZNTTLL5XemObSTfvzhbS6PZ8RcvRVXLNJjZYYO5xAEHNg3i5Hxao5p3QKzVJ8m P5n4jSiTY/pVePcs9dzzQTGjlzkE11KX7DBxnmXOSPZsArSaRIC53DCmqu/JoG+o 3JJBkmRx7IJb0651hclFaUl8Wl56FSst+zigeAj82b301xpVR30iG3xiwYK/AT8= =NQ6n -----END PGP SIGNATURE----- Merge tag 'regulator-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Aside from a fix for a spurious warning (which caused more problems than it fixed in the fixing really) this is all driver updates, including new drivers for Dialog PV88060/90 and TI LM363x and TPS65086 devices. The qcom_smd driver has had PM8916 and PMA8084 support added" * tag 'regulator-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits) regulator: core: remove some dead code regulator: core: use dev_to_rdev regulator: lp872x: Get rid of duplicate reference to DVS GPIO regulator: lp872x: Add missing of_match in regulators descriptions regulator: axp20x: Fix GPIO LDO enable value for AXP22x regulator: lp8788: constify regulator_ops structures regulator: wm8*: constify regulator_ops structures regulator: da9*: constify regulator_ops structures regulator: mt6311: Use REGCACHE_RBTREE regulator: tps65917/palmas: Add bypass ops for LDOs with bypass capability regulator: qcom-smd: Add support for PMA8084 regulator: qcom-smd: Add PM8916 support soc: qcom: documentation: Update SMD/RPM Docs regulator: pv88090: logical vs bitwise AND typo regulator: pv88090: Fix irq leak regulator: pv88090: new regulator driver regulator: wm831x-ldo: Use platform_register/unregister_drivers() regulator: wm831x-dcdc: Use platform_register/unregister_drivers() regulator: lp8788-ldo: Use platform_register/unregister_drivers() regulator: core: Fix nested locking of supplies ... |
||
|
Linus Torvalds
|
cf8d7e3850 |
- New Device Support
- Add support for s2mps15; sec-core
- Add support for Lewisburg; lpc_ich
- Add support for cs47l24 and wm1831; arizona
- New Functionality
- Allow user to select syscon register width; syscon
- Fix-ups
- Lots of Checkpatch fixes
- Rename -pmic/-regulator; s2mps11
- Build driver components into a single module; wm8994-*
- Better handing of IRQ during suspend/resume; as3722
- Constify things; da903x
- Remove unused code; ab8500-core
- Improve error handing; qcom_rpm
- Simplify code: wm831x-otp, sta2x11-mfd
- Improve locking; cros_ec_spi
- Fix incorrect DT binding filename reference; arizona, palmas,
snps-dwapb-gpio, wm8994
- Bug Fixes
- Fix broken SYSFS 'show ID' call; wm831x-otp
- Protect reads from non-existent registers; qcom-spmi-pmic
- Repair build warnings; as3722
- Fix IRQ request ordering; arizona-irq
- Ensure return value is boolean; ucb1x00-core, tps65010, tc6393xb,
htc-egpio, dm355evm_msp, asic3,
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=IY7O
-----END PGP SIGNATURE-----
Merge tag 'mfd-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for s2mps15; sec-core
- Add support for Lewisburg; lpc_ich
- Add support for cs47l24 and wm1831; arizona
New Functionality:
- Allow user to select syscon register width; syscon
Fix-ups:
- Lots of Checkpatch fixes
- Rename -pmic/-regulator; s2mps11
- Build driver components into a single module; wm8994-*
- Better handing of IRQ during suspend/resume; as3722
- Constify things; da903x
- Remove unused code; ab8500-core
- Improve error handing; qcom_rpm
- Simplify code: wm831x-otp, sta2x11-mfd
- Improve locking; cros_ec_spi
- Fix incorrect DT binding filename reference; arizona, palmas,
snps-dwapb-gpio, wm8994
Bug Fixes:
- Fix broken SYSFS 'show ID' call; wm831x-otp
- Protect reads from non-existent registers; qcom-spmi-pmic
- Repair build warnings; as3722
- Fix IRQ request ordering; arizona-irq
- Ensure return value is boolean; ucb1x00-core, tps65010, tc6393xb,
htc-egpio, dm355evm_msp, asic3"
* tag 'mfd-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (58 commits)
mfd: davinci_voicecodec: Remove pointless 'out of memory' error message
mfd: da9052-irq: Fix trivial 'space before comma' error
mfd: da9052-i2c: Fix tabbing/whitespace issue
mfd: da903x: Fix white space and split string issues
mfd: cs5535-mfd: Add missing line spacing and make local array static
mfd: cros_ec_spi: Repair comparison ordering issue
mfd: cros_ec_i2c: Fix trivial 'tabs before spaces' whitespace issue.
mfd: asic3: Fix a plethora of Checkpatch errors and warnings
mfd: as3711: Repair OOM and 'line over 80 chars' formatting warnings
mfd: arizona-i2c: Add blank line formatting after declaration
mfd: arizona-core: msleep() is unreliable for anything <20ms use usleep_range() instead
mfd: adp5520: Some trivial 'no space before tab' fixes
mfd: ab8500-sysctrl: Fix Constify, printk => pr_info and formatting issues
mfd: ab8500-gpadc: Squash a whole bunch of Checkpatch warnings and one error
mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formatting
mfd: ab8500-core: Fix many warnings reported by Checkpatch
mfd: ab2100-otp: Remove pointless 'out of memory' error message
mfd: ab3100-core.c: Fix multiple warnings reported by Checkpatch
mfd: aat2870-core: Remove unnecessary 'out of memory' message
mfd: 88pm860x-core: Fix commenting and declaration spacing
...
|
||
|
Linus Torvalds
|
39272dde8f |
Staging patches for 4.5-rc1
Here is the big staging driver pull request for 4.5-rc1. Lots of cleanups and fixes here, not as many as some releases, but 800+ isn't that bad. Full details in the shortlog. All of these have been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlaV0VgACgkQMUfUDdst+ykvAwCeIN/Ot3OuWD/d1RQrcUzh028H rlUAn3YOHCFlQhAnUI+9KMNjH0CwAJKp =Oij1 -----END PGP SIGNATURE----- Merge tag 'staging-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big staging driver pull request for 4.5-rc1. Lots of cleanups and fixes here, not as many as some releases, but 800+ isn't that bad. Full details in the shortlog. All of these have been in linux-next for a while" * tag 'staging-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (843 commits) Revert "arm64: dts: Add dts files to enable ION on Hi6220 SoC." staging: gdm724x: constify tty_port_operations structs staging: gdm72xx: add userspace data struct staging: gdm72xx: Replace timeval with ktime_t iio: adc: ina2xx: Fix incorrect report of data endianness to userspace. iio: light: us5182d: Refactor read_raw function iio: light: us5182d: Add interrupt support and events iio: light: us5182d: Fix enable status inconcistency iio: Make IIO value formating function globally available. staging: emxx_udc: use list_first_entry_or_null() staging/emxx_udc: fix 64-bit warnings STAGING: COMEDI: Using kernel types in plx9080.h STAGING: COMEDI: Added spaces around binary operators in plx9080.h STAGING: COMEDI: Fixed format of comments in plx9080.h staging: comedi: comedilib.h: Coding style warning fix for block comments staging: comedi: s526: add macros for counter control reg values staging: comedi: s526: replace counter mode bitfield struct staging: comedi: check for more errors for zero-length write staging: comedi: simplify returned errors for comedi_write() staging: comedi: return error on "write" if no command set up ... |
||
|
Linus Torvalds
|
67990608c8 |
Power management and ACPI updates for v4.5-rc1
- Add a debugfs-based interface for interacting with the ACPICA's
AML debugger introduced in the previous cycle and a new user
space tool for that, fix some bugs related to the AML debugger
and clean up the code in question (Lv Zheng, Dan Carpenter,
Colin Ian King, Markus Elfring).
- Update ACPICA to upstream revision 20151218 including a number
of fixes and cleanups in the ACPICA core (Bob Moore, Lv Zheng,
Labbe Corentin, Prarit Bhargava, Colin Ian King, David E Box,
Rafael Wysocki).
In particular, the previously added erroneous support for the
_SUB object is dropped, the concatenate operator will support
all ACPI objects now, the Debug Object handling is improved,
the SuperName handling of parameters being control methods is
fixed, the ObjectType operator handling is updated to follow
ACPI 5.0A and the handling of CondRefOf and RefOf is updated
accordingly, module-level code will be executed after loading
each ACPI table now (instead of being run once after all tables
containing AML have been loaded), the Operation Region handlers
management is updated to fix some reported problems and a the
ACPICA code in the kernel is more in line with the upstream
now.
- Update the ACPI backlight driver to provide information on
whether or not it will generate key-presses for brightness
change hotkeys and update some platform drivers (dell-wmi,
thinkpad_acpi) to use that information to avoid sending double
key-events to users pace for these, add new ACPI backlight
quirks (Hans de Goede, Aaron Lu, Adrien Schildknecht).
- Improve the ACPI handling of interrupt GPIOs (Christophe Ricard).
- Fix the handling of the list of device IDs of device objects
found in the ACPI namespace and add a helper for checking if
there is a device object for a given device ID (Lukas Wunner).
- Change the logic in the ACPI namespace scanning code to create
struct acpi_device objects for all ACPI device objects found in
the namespace even if _STA fails for them which helps to avoid
device enumeration problems on Microsoft Surface 3 (Aaron Lu).
- Add support for the APM X-Gene ACPI I2C device to the ACPI
driver for AMD SoCs (Loc Ho).
- Fix the long-standing issue with the DMA controller on Intel
SoCs where ACPI tables have no power management support for
the DMA controller itself, but it can be powered off automatically
when the last (other) device on the SoC is powered off via ACPI
and clean up the ACPI driver for Intel SoCs (acpi-lpss) after
previous attempts to fix that problem (Andy Shevchenko).
- Assorted ACPI fixes and cleanups (Andy Lutomirski, Colin Ian King,
Javier Martinez Canillas, Ken Xue, Mathias Krause, Rafael Wysocki,
Sinan Kaya).
- Update the device properties framework for better handling of
built-in properties, add support for built-in properties to
the platform bus type, update the MFD subsystem's handling
of device properties and add support for passing default
configuration data as device properties to the intel-lpss MFD
drivers, convert the designware I2C driver to use the unified
device properties API and add a fallback mechanism for using
default built-in properties if the platform firmware fails
to provide the properties as expected by drivers (Andy Shevchenko,
Mika Westerberg, Heikki Krogerus, Andrew Morton).
- Add new Device Tree bindings to the Operating Performance Points
(OPP) framework and update the exynos4412 DT binding accordingly,
introduce debugfs support for the OPP framework (Viresh Kumar,
Bartlomiej Zolnierkiewicz).
- Migrate the mt8173 cpufreq driver to the new OPP bindings
(Pi-Cheng Chen).
- Update the cpufreq core to make the handling of governors
more efficient, especially on systems where policy objects
are shared between multiple CPUs (Viresh Kumar, Rafael Wysocki).
- Fix cpufreq governor handling on configurations with
CONFIG_HZ_PERIODIC set (Chen Yu).
- Clean up the cpufreq core code related to the boost sysfs knob
support and update the ACPI cpufreq driver accordingly (Rafael
Wysocki).
- Add a new cpufreq driver for ST platforms and corresponding
Device Tree bindings (Lee Jones).
- Update the intel_pstate driver to allow the P-state selection
algorithm used by it to depend on the CPU ID of the processor it
is running on, make it use a special P-state selection algorithm
(with an IO wait time compensation tweak) on Atom CPUs based on
the Airmont and Silvermont cores so as to reduce their energy
consumption and improve intel_pstate documentation (Philippe
Longepe, Srinivas Pandruvada).
- Update the cpufreq-dt driver to support registering cooling
devices that use the (P * V^2 * f) dynamic power draw formula
where V is the voltage, f is the frequency and P is a constant
coefficient provided by Device Tree and update the arm_big_little
cpufreq driver to use that support (Punit Agrawal).
- Assorted cpufreq driver (cpufreq-dt, qoriq, pcc-cpufreq,
blackfin-cpufreq) updates (Andrzej Hajda, Hongtao Jia,
Jacob Tanenbaum, Markus Elfring).
- cpuidle core tweaks related to polling and measured_us
calculation (Rik van Riel).
- Removal of modularity from a few cpuidle drivers (clps711x,
ux500, exynos) that cannot be built as modules in practice
(Paul Gortmaker).
- PM core update to prevent devices from being probed during
system suspend/resume which is generally problematic and may
lead to inconsistent behavior (Grygorii Strashko).
- Assorted updates of the PM core and related code (Julia Lawall,
Manuel Pégourié-Gonnard, Maruthi Bayyavarapu, Rafael Wysocki,
Ulf Hansson).
- PNP bus type updates (Christophe Le Roy, Heiner Kallweit).
- PCI PM code cleanups (Jarkko Nikula, Julia Lawall).
- cpupower tool updates (Jacob Tanenbaum, Thomas Renninger).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABCAAGBQJWlZOmAAoJEILEb/54YlRxxtEP/ioR0xMOJQcWd5F6Oyj1PZsx
vJeXsmL3fXFAlr6riaE966QqclhUTDhhex3kbFmNQvM8WukxOmBWy5UMSjRg2UmM
PHrogc/KrrE+xb8hjGZPgqVr+/L9O3C6lZmM+AUciT0hWZJckYgRh5TpHb1xN/Kx
MptvtSXRBM62LWytug+EwA4SHt7OFS0yJ/CI1pKvODVtLaYDIPI5k+4ilPU7y6Be
vfoysvmUozNTEYxgPOPXfoQqW2P5t2df32Re31uKtLenLXbc8KW0wIYm24DXgSK6
V/TyDVZTNaZk6OpTqWrjqFbedpGvcBpViwYEY7yv33GDCpXGdHQl3ga+Jy6PAUem
7oGDZtA+5Di/8szhH/wSdpXwSaKEeUdFiaj6Uw2MAwiY4wzv5+WmLRcuIjQFDAxT
elrTbQhAgaMlMsUkQ9NV4GC7ByUeeQX2NpCielsHngOQgKdYRQHyYUgGXc2Wgjdq
UnVrIWRHzXSED0RtPI7IT0Y4PSxkM9UoSEiVUwt3srCue2CFzuENs23qaDgAzeDa
5uwnDl4RhI2BrLVT1WhioIFgFE5Yh5Xx6dSGC+jcU2ss8r2oN6DdUbqOzWAa1iR4
sFhgwwwizpCCfB6pSqEuDdg8W56HjvE9kQY9kcTPPNPbktL0VImC+iiSN/CgZJv9
MH9NbQM8uHkfNcpjsN7V
=OlYA
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.5-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull oower management and ACPI updates from Rafael Wysocki:
"As far as the number of commits goes, ACPICA takes the lead this time,
followed by cpufreq and the device properties framework changes.
The most significant new feature is the debugfs-based interface to the
ACPICA's AML debugger added in the previous cycle and a new user space
tool for accessing it.
On the cpufreq front, the core is updated to handle governors more
efficiently, particularly on systems where a single cpufreq policy
object is shared between multiple CPUs, and there are quite a few
changes in drivers (intel_pstate, cpufreq-dt etc).
The device properties framework is updated to handle built-in (ie
included in the kernel itself) device properties better, among other
things by adding a fallback mechanism that will allow drivers to
provide default properties to be used in case the plaform firmware
doesn't provide the properties expected by them.
The Operating Performance Points (OPP) framework gets new DT bindings
and debugfs support.
A new cpufreq driver for ST platforms is added and the ACPI driver for
AMD SoCs will now support the APM X-Gene ACPI I2C device.
The rest is mostly fixes and cleanups all over.
Specifics:
- Add a debugfs-based interface for interacting with the ACPICA's AML
debugger introduced in the previous cycle and a new user space tool
for that, fix some bugs related to the AML debugger and clean up
the code in question (Lv Zheng, Dan Carpenter, Colin Ian King,
Markus Elfring).
- Update ACPICA to upstream revision 20151218 including a number of
fixes and cleanups in the ACPICA core (Bob Moore, Lv Zheng, Labbe
Corentin, Prarit Bhargava, Colin Ian King, David E Box, Rafael
Wysocki).
In particular, the previously added erroneous support for the _SUB
object is dropped, the concatenate operator will support all ACPI
objects now, the Debug Object handling is improved, the SuperName
handling of parameters being control methods is fixed, the
ObjectType operator handling is updated to follow ACPI 5.0A and the
handling of CondRefOf and RefOf is updated accordingly, module-
level code will be executed after loading each ACPI table now
(instead of being run once after all tables containing AML have
been loaded), the Operation Region handlers management is updated
to fix some reported problems and a the ACPICA code in the kernel
is more in line with the upstream now.
- Update the ACPI backlight driver to provide information on whether
or not it will generate key-presses for brightness change hotkeys
and update some platform drivers (dell-wmi, thinkpad_acpi) to use
that information to avoid sending double key-events to users pace
for these, add new ACPI backlight quirks (Hans de Goede, Aaron Lu,
Adrien Schildknecht).
- Improve the ACPI handling of interrupt GPIOs (Christophe Ricard).
- Fix the handling of the list of device IDs of device objects found
in the ACPI namespace and add a helper for checking if there is a
device object for a given device ID (Lukas Wunner).
- Change the logic in the ACPI namespace scanning code to create
struct acpi_device objects for all ACPI device objects found in the
namespace even if _STA fails for them which helps to avoid device
enumeration problems on Microsoft Surface 3 (Aaron Lu).
- Add support for the APM X-Gene ACPI I2C device to the ACPI driver
for AMD SoCs (Loc Ho).
- Fix the long-standing issue with the DMA controller on Intel SoCs
where ACPI tables have no power management support for the DMA
controller itself, but it can be powered off automatically when the
last (other) device on the SoC is powered off via ACPI and clean up
the ACPI driver for Intel SoCs (acpi-lpss) after previous attempts
to fix that problem (Andy Shevchenko).
- Assorted ACPI fixes and cleanups (Andy Lutomirski, Colin Ian King,
Javier Martinez Canillas, Ken Xue, Mathias Krause, Rafael Wysocki,
Sinan Kaya).
- Update the device properties framework for better handling of
built-in properties, add support for built-in properties to the
platform bus type, update the MFD subsystem's handling of device
properties and add support for passing default configuration data
as device properties to the intel-lpss MFD drivers, convert the
designware I2C driver to use the unified device properties API and
add a fallback mechanism for using default built-in properties if
the platform firmware fails to provide the properties as expected
by drivers (Andy Shevchenko, Mika Westerberg, Heikki Krogerus,
Andrew Morton).
- Add new Device Tree bindings to the Operating Performance Points
(OPP) framework and update the exynos4412 DT binding accordingly,
introduce debugfs support for the OPP framework (Viresh Kumar,
Bartlomiej Zolnierkiewicz).
- Migrate the mt8173 cpufreq driver to the new OPP bindings (Pi-Cheng
Chen).
- Update the cpufreq core to make the handling of governors more
efficient, especially on systems where policy objects are shared
between multiple CPUs (Viresh Kumar, Rafael Wysocki).
- Fix cpufreq governor handling on configurations with
CONFIG_HZ_PERIODIC set (Chen Yu).
- Clean up the cpufreq core code related to the boost sysfs knob
support and update the ACPI cpufreq driver accordingly (Rafael
Wysocki).
- Add a new cpufreq driver for ST platforms and corresponding Device
Tree bindings (Lee Jones).
- Update the intel_pstate driver to allow the P-state selection
algorithm used by it to depend on the CPU ID of the processor it is
running on, make it use a special P-state selection algorithm (with
an IO wait time compensation tweak) on Atom CPUs based on the
Airmont and Silvermont cores so as to reduce their energy
consumption and improve intel_pstate documentation (Philippe
Longepe, Srinivas Pandruvada).
- Update the cpufreq-dt driver to support registering cooling devices
that use the (P * V^2 * f) dynamic power draw formula where V is
the voltage, f is the frequency and P is a constant coefficient
provided by Device Tree and update the arm_big_little cpufreq
driver to use that support (Punit Agrawal).
- Assorted cpufreq driver (cpufreq-dt, qoriq, pcc-cpufreq,
blackfin-cpufreq) updates (Andrzej Hajda, Hongtao Jia, Jacob
Tanenbaum, Markus Elfring).
- cpuidle core tweaks related to polling and measured_us calculation
(Rik van Riel).
- Removal of modularity from a few cpuidle drivers (clps711x, ux500,
exynos) that cannot be built as modules in practice (Paul
Gortmaker).
- PM core update to prevent devices from being probed during system
suspend/resume which is generally problematic and may lead to
inconsistent behavior (Grygorii Strashko).
- Assorted updates of the PM core and related code (Julia Lawall,
Manuel Pégourié-Gonnard, Maruthi Bayyavarapu, Rafael Wysocki, Ulf
Hansson).
- PNP bus type updates (Christophe Le Roy, Heiner Kallweit).
- PCI PM code cleanups (Jarkko Nikula, Julia Lawall).
- cpupower tool updates (Jacob Tanenbaum, Thomas Renninger)"
* tag 'pm+acpi-4.5-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (177 commits)
PM / clk: don't leave clocks enabled when driver not bound
i2c: dw: Add APM X-Gene ACPI I2C device support
ACPI / APD: Add APM X-Gene ACPI I2C device support
ACPI / LPSS: change 'does not have' to 'has' in comment
Revert "dmaengine: dw: platform: provide platform data for Intel"
dmaengine: dw: return immediately from IRQ when DMA isn't in use
dmaengine: dw: platform: power on device on shutdown
ACPI / LPSS: override power state for LPSS DMA device
PM / OPP: Use snprintf() instead of sprintf()
Documentation: cpufreq: intel_pstate: enhance documentation
ACPI, PCI, irq: remove redundant check for null string pointer
ACPI / video: driver must be registered before checking for keypresses
cpufreq-dt: fix handling regulator_get_voltage() result
cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC
PM / sleep: Add support for read-only sysfs attributes
ACPI: Fix white space in a structure definition
ACPI / SBS: fix inconsistent indenting inside if statement
PNP: respect PNP_DRIVER_RES_DO_NOT_CHANGE when detaching
ACPI / PNP: constify device IDs
ACPI / PCI: Simplify acpi_penalize_isa_irq()
...
|
||
|
Krzysztof Kozlowski
|
8ae83b6f76 |
rtc: s5m: Make register configuration per S2MPS device to remove exceptions
Before updating time and alarm the driver must set appropriate mask in UDR register. For that purpose the driver uses common register configuration and a lot of exceptions per device in the code. The exceptions are not obvious, for example except the change in the logic sometimes the fields are swapped (WUDR and AUDR between S2MPS14 and S2MPS15). This leads to quite complicated code. Try to make it more obvious by: 1. Documenting the UDR masks for devices and operations. 2. Adding fields in register configuration structure for each operation (read time, write time and alarm). 3. Splitting the configuration per S2MPS13, S2MPS14 and S2MPS15 thus removing exceptions for them. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> |
||
|
Charles Keepax
|
f199d39349 |
mfd: arizona: Add device tree binding to specify mono outputs
Add device tree bindings to support specifying outputs from the chip as mono outputs. Whilst we are doing it change the out_mono pdata from a bool to an int, because Sparse gets upset about using ARRAY_SIZE on bools. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Andrew Lunn
|
0dd756f767 |
leds: wm8350: Remove work queue
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Antonio Ospite <ao2@ao2.it> Reviewed-by: Mark Brown <broonie@kernel.org> |
||
|
Andy Shevchenko
|
4d215cabc7 |
mfd: core: propagate device properties to sub devices drivers
In the similar way like we do for the platform data we propagate the device properties. For example, in case of Intel LPSS drivers we may provide a specific property to tell the actual device driver an additional information such as platform name. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Richard Fitzgerald
|
ea1f333990 |
mfd: arizona: Support Cirrus Logic CS47L24 and WM1831
This patch adds the regmap configuration tables and core MFD handling for the CS47L24 and WM1831 codecs. Note that compared to the other Arizona codecs, these devices do not have an LDO1 or micsupp regulators, extcon driver, or the DCVDD isolation control. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Greg Kroah-Hartman
|
f3cf3fb7ec |
First set of new device support, features and cleanups for IIO in the 4.5 cycle
Usual mixed bag, but the big item perhaps in this series is the DMA buffer
support added by Lars-Peter Clausen. It's been in the works for a long time
and it will be interesting to see what hardware support shows up now that
this is available.
New core features + associate cleanup.
* Add generic DMA buffer infrastructure
* Add a DMAengine framework based buffer
Also associated minor changes.
- Set the device buffer watermark based on the minimum watermark for all
attached buffers rather than just the 'primary' one.
- iio_buffer_init - only set the watermark default if one hasn't already
been provided. This allows simple support for devices with a fixed
watermark.
- read only attribute for watermark on fixed watermark devices.
- add explicit buffer enable/disable callbacks to allow the buffer to
do more than trivial actions when it is being turned on and off.
* IIO_VAL_INT support in write_raw_get_fmt function.
New device support
* Freescale MMA7455/7456L accelerometers
* Memsic MXC6255XC accelerometer
* ST lis2dh12 accelerometer
* TI ADS8688 ADC
* TI Palamas (twl6035/7) gpadc
New driver features
* mma8452
- support either of the available interrupt pins to cope with the case
where board layout has lead to a particular one being connected.
Staging graduation
* Dummy driver
- this driver acts as both an example and a test device for those with
out hardware to develop userspace code against.
Cleanups and minor bits and bobs.
* treewide
- Sort out the ordering of iio_device_register/unregister vs runtime
pm function calls so that it's all nice and consistent and not race
prone.
- Check sscanf return values. None of the cases will actually happen as
the strings are supplied internally, but best to be consistent on this.
* ad7780
- switch over to the gpio descriptor interface and remove the now unused
platform data which gets rid of a header entirely.
* ad7793
- drop a pointless else statement.
* at91_adc
- Swap kmalloc_array in for a kmalloc doing the same job.
* dummy
- get rid of some commented out lines that snuck in during the move of
the driver.
* lm3533-als
- Print an error message on provision of an invalid resistance.
* mcp320x
- Add compatible strings with vendor prefix and deprecate those with
no vendor prefix.
* mxs-lradc
- Use BIT macro in various places rather than shifted ones.
* pa12203001
- Power off the chip if the registration fails.
* pulsedlight-lidar-lite
- add runtime PM support.
* xilinx XADC
- constify an iio_buffer_setup_ops structure.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=CfCl
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 4.5 cycle
Usual mixed bag, but the big item perhaps in this series is the DMA buffer
support added by Lars-Peter Clausen. It's been in the works for a long time
and it will be interesting to see what hardware support shows up now that
this is available.
New core features + associate cleanup.
* Add generic DMA buffer infrastructure
* Add a DMAengine framework based buffer
Also associated minor changes.
- Set the device buffer watermark based on the minimum watermark for all
attached buffers rather than just the 'primary' one.
- iio_buffer_init - only set the watermark default if one hasn't already
been provided. This allows simple support for devices with a fixed
watermark.
- read only attribute for watermark on fixed watermark devices.
- add explicit buffer enable/disable callbacks to allow the buffer to
do more than trivial actions when it is being turned on and off.
* IIO_VAL_INT support in write_raw_get_fmt function.
New device support
* Freescale MMA7455/7456L accelerometers
* Memsic MXC6255XC accelerometer
* ST lis2dh12 accelerometer
* TI ADS8688 ADC
* TI Palamas (twl6035/7) gpadc
New driver features
* mma8452
- support either of the available interrupt pins to cope with the case
where board layout has lead to a particular one being connected.
Staging graduation
* Dummy driver
- this driver acts as both an example and a test device for those with
out hardware to develop userspace code against.
Cleanups and minor bits and bobs.
* treewide
- Sort out the ordering of iio_device_register/unregister vs runtime
pm function calls so that it's all nice and consistent and not race
prone.
- Check sscanf return values. None of the cases will actually happen as
the strings are supplied internally, but best to be consistent on this.
* ad7780
- switch over to the gpio descriptor interface and remove the now unused
platform data which gets rid of a header entirely.
* ad7793
- drop a pointless else statement.
* at91_adc
- Swap kmalloc_array in for a kmalloc doing the same job.
* dummy
- get rid of some commented out lines that snuck in during the move of
the driver.
* lm3533-als
- Print an error message on provision of an invalid resistance.
* mcp320x
- Add compatible strings with vendor prefix and deprecate those with
no vendor prefix.
* mxs-lradc
- Use BIT macro in various places rather than shifted ones.
* pa12203001
- Power off the chip if the registration fails.
* pulsedlight-lidar-lite
- add runtime PM support.
* xilinx XADC
- constify an iio_buffer_setup_ops structure.
|
||
|
Nikita Kiryanov
|
c0ea88b890 |
regulator: tps65218: add support for LS3 current regulator
Add support for TPS65218 LS3 current regulator, which is capable of 4 current input limit modes: 100, 200, 500, and 1000 uA. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Alim Akhtar
|
a65e5efa7c |
rtc: s5m.c: Add support for S2MPS15 RTC
RTC found in s2mps15 is almost same as one found on s2mps13
with few differences in RTC_UPDATE register fields, like:
1> Bit[4] and Bit[1] are reversed
- On s2mps13
WUDR -> bit[4], AUDR -> bit[1]
- On s2mps15
WUDR -> bit[1], AUDR -> bit[4]
2> In case of s2mps13, for alarm register, need to set both
WDUR and ADUR high, whereas for s2mps15 only set AUDR to high.
3> On s2mps15, WUDR, RUDR and AUDR functions should never be used
at the same time.
This patch add required changes to enable s2mps15 rtc timer.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
||
|
Thomas Abraham
|
9e4808d2c6 |
mfd: sec: Add support for S2MPS15 PMIC
Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15 PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz clock outputs and battery charger. This patch adds initial support for LDO and buck regulators of S2MPS15 device. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [Alim: Added s2mps15_devs like rtc and clk and related changes] Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Linus Torvalds
|
63f4f7e8df |
platform/chrome: Branch for v4.4
Here's the branch of chrome platform changes for v4.4. Some have been queued up for the full 4.3 release cycle since I forgot to send them in for that round (rebased early on to deal with fixes conflicts). Most of these enable EC communication stuff -- Pixel 2015 support, enabling building for ARM64 platforms, and a few fixes for memory leaks. There's also a patch in here to allow reading/writing the verified boot context, which depends on a sysfs patch acked by Greg. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWQWj/AAoJEIwa5zzehBx3figQAJuZK+2PDMeOe3hg38WEHpAA NVaSkZss2VLN8SQCJ8BqB/xoM2lm3GSef2R705m7s20/FsPP7rcJZoeeNkWUK+rn Dc01uJpVwGVtBIjst0FkxS+3xBeUrX6QLQyAnxQV4SIOg4t1EtZvgxK/4wnE726H BV0bTsUHKo0+FSrtI/QoHFkSFbUBansQ7JuN00YOfuwJPdhKgpInbJPqVkmRAYqI ylFFiTUR946SNDMUvmDnd37I2FrIzxslNTBu/oKl0DKI7DPmN3ITvX2JqnnuxktA ru7TWbny+oa2TQAwynYxBq9hpMFHMVVbtDPXE/7MisfL4+KUaSE0e95b4ONfG7yZ oxzf6S1RxzhA0Eo/bFZ0i29DZ4ogR8ql65RNolWJg13XACrPVyGrTWW5ZFe6xbI9 HS13oBOHXIllSDfq9QjMRtNHAv268/oTiF8LXLPrxSCYllGZnKL7g9Ae9dFqOdXx mnoqYtVPsaErek4ktqOZIMRY5mXpX2JyR642PjGbK71IjRKmGvvRqpee+iCpF7ew OR80tAq56/R3NQqp5pgReshglOwQsLdu99spSc+6anjdeSb85ujM2jwXGjLNHwDi 9XpyIAXox5dy3CX8LqgqryIKp/vqRd4q1vugKXLL1dBMSAm/QltjqPWxB2fCRCve IqNEhz4EI6uhJVeqDSNo =dv1O -----END PGP SIGNATURE----- Merge tag 'chrome-platform-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform Pull chrome platform updates from Olof Johansson: "Here's the branch of chrome platform changes for v4.4. Some have been queued up for the full 4.3 release cycle since I forgot to send them in for that round (rebased early on to deal with fixes conflicts). Most of these enable EC communication stuff -- Pixel 2015 support, enabling building for ARM64 platforms, and a few fixes for memory leaks. There's also a patch in here to allow reading/writing the verified boot context, which depends on a sysfs patch acked by Greg" * tag 'chrome-platform-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: platform/chrome: Fix i2c-designware adapter name platform/chrome: Support reading/writing the vboot context sysfs: Support is_visible() on binary attributes platform/chrome: cros_ec: Fix possible leak in led_rgb_store() platform/chrome: cros_ec: Fix leak in sequence_store() platform/chrome: Enable Chrome platforms on 64-bit ARM platform/chrome: cros_ec_dev - Add a platform device ID table platform/chrome: cros_ec_lpc - Add support for Google Pixel 2 platform/chrome: cros_ec_lpc - Use existing function to check EC result platform/chrome: Make depends on MFD_CROS_EC instead CROS_EC_PROTO Revert "platform/chrome: Don't make CHROME_PLATFORMS depends on X86 || ARM" |
||
|
Linus Torvalds
|
56e0464980 |
ARM: SoC platform updates for v4.4
New and/or improved SoC support for this release:
- Marvell Berlin:
* Enable standard DT-based cpufreq
* Add CPU hotplug support
- Freescale:
* Ethernet init for i.MX7D
* Suspend/resume support for i.MX6UL
- Allwinner:
* Support for R8 chipset (used on NTC's $9 C.H.I.P board)
- Mediatek:
* SMP support for some platforms
- Uniphier:
* L2 support
* Cleaned up SMP support, etc.
+ A handful of other patches around above functionality, and a few other
smaller changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=h5xk
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"New and/or improved SoC support for this release:
Marvell Berlin:
- Enable standard DT-based cpufreq
- Add CPU hotplug support
Freescale:
- Ethernet init for i.MX7D
- Suspend/resume support for i.MX6UL
Allwinner:
- Support for R8 chipset (used on NTC's $9 C.H.I.P board)
Mediatek:
- SMP support for some platforms
Uniphier:
- L2 support
- Cleaned up SMP support, etc.
plus a handful of other patches around above functionality, and a few
other smaller changes"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
ARM: uniphier: rework SMP operations to use trampoline code
ARM: uniphier: add outer cache support
Documentation: EXYNOS: Update bootloader interface on exynos542x
ARM: mvebu: add broken-idle option
ARM: orion5x: use mac_pton() helper
ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned
ARM: sunxi: Add R8 support
ARM: digicolor: select pinctrl/gpio driver
arm: berlin: add CPU hotplug support
arm: berlin: use non-self-cleared reset register to reset cpu
ARM: mediatek: add smp bringup code
ARM: mediatek: enable gpt6 on boot up to make arch timer working
soc: mediatek: Fix random hang up issue while kernel init
soc: ti: qmss: make acc queue support optional in the driver
soc: ti: add firmware file name as part of the driver
Documentation: dt: soc: Add description for knav qmss driver
ARM: S3C64XX: Use PWM lookup table for mach-smartq
ARM: S3C64XX: Use PWM lookup table for mach-hmt
ARM: S3C64XX: Use PWM lookup table for mach-crag6410
ARM: S3C64XX: Use PWM lookup table for smdk6410
...
|
||
|
Linus Torvalds
|
bc914532a0 |
- New Device Support
- Add support for 88pm860; 88pm80x
- Add support for 24c08 EEPROM; at24
- Add support for Broxton Whiskey Cove; intel*
- Add support for RTS522A; rts5227
- Add support for I2C devices; intel_quark_i2c_gpio
- New Functionality
- Add microphone support; arizona
- Add general purpose switch support; arizona
- Add fuel-gauge support; da9150-core
- Add shutdown support; sec-core
- Add charger support; tps65217
- Add flexible serial communication unit support; atmel-flexcom
- Add power button support; axp20x
- Add led-flash support; rt5033
- Core Frameworks
- Supply a generic macro for defining Regmap IRQs
- Rework ACPI child device matching
- Fix-ups
- Use Regmap to access registers; tps6105x
- Use DEFINE_RES_IRQ_NAMED() macro; da9150
- Re-arrange device registration order; intel_quark_i2c_gpio
- Allow OF matching; cros_ec_i2c, atmel-hlcdc, hi6421-pmic, max8997, sm501
- Handle deferred probe; twl6040
- Improve accuracy of headphone detect; arizona
- Unnecessary MODULE_ALIAS() removal; bcm590xx, rt5033
- Remove unused code; htc-i2cpld, arizona, pcf50633-irq, sec-core
- Simplify code; kempld, rts5209, da903x, lm3533, da9052, arizona
- Remove #iffery; arizona
- DT binding adaptions; many
- Bug Fixes
- Fix possible NULL pointer dereference; wm831x, tps6105x
- Fix 64bit bug; intel_soc_pmic_bxtwc
- Fix signedness issue; arizona
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWOzEbAAoJEFGvii+H/HdhbUEQAIBHvNaunWp362L2D2lOOQMa
cBlGiR2yXCpsFGAcvpr50zX5soFuNITGea1CidJmp/ZIHIG7hVUz5E8wQZ8HdiyG
03UKsa6xkVx9i+PhV5agUjxi6MDgUvxsPwdbVw6LTw1wQejIrfxq7ObdcPo30OTI
4r0tjLonQkGaFFdGqC4Jr7Grs7pvzmKzHu08AaknaoTyhUl/E9Wtq12HJFr8kUCw
WNgEyiPzNk0h9EByCUiG7iFwyg1EJLsF1U973Th8Utvl7PFe8REQVZ46v9iYAM9J
1OeSrsKhtyhQqAP/FJ5odZCXwTy9q6ifGfELyyS26/okCYWDzxDcF+hAp0VNbzb4
zYvEnKue101Y+WEsF9bNaya3avf45obJuRaRukoGMZ/brW6+d1ub0kwUKMD8MqOn
UFL3oZwfPQ8mWB5ddELl97dzJDwHbEIhWe7yKQVpTaJ2pCm6JSS5Vb0TU+A1Zywp
Hie1Yr0y36npnCbml4W74O9H/rblpNpgFlaupfB6mHRWZyTsyQNeKJ6FWTirncgQ
xy8Ti+ZsXlMTvWCzzS3GcjP9rAK0e5dKurOE8t+krZmTul96+OYsnvxRC0nyo7XC
1PKomkWO+3if2DsnurFX/QKfE55PCKermJRO5mDZbsWp6aJAhKW5UwxAgkHpUHsJ
hHaT+npBczXbq8jvEMTt
=99/D
-----END PGP SIGNATURE-----
Merge tag 'mfd-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for 88pm860; 88pm80x
- Add support for 24c08 EEPROM; at24
- Add support for Broxton Whiskey Cove; intel*
- Add support for RTS522A; rts5227
- Add support for I2C devices; intel_quark_i2c_gpio
New Functionality:
- Add microphone support; arizona
- Add general purpose switch support; arizona
- Add fuel-gauge support; da9150-core
- Add shutdown support; sec-core
- Add charger support; tps65217
- Add flexible serial communication unit support; atmel-flexcom
- Add power button support; axp20x
- Add led-flash support; rt5033
Core Frameworks:
- Supply a generic macro for defining Regmap IRQs
- Rework ACPI child device matching
Fix-ups:
- Use Regmap to access registers; tps6105x
- Use DEFINE_RES_IRQ_NAMED() macro; da9150
- Re-arrange device registration order; intel_quark_i2c_gpio
- Allow OF matching; cros_ec_i2c, atmel-hlcdc, hi6421-pmic, max8997, sm501
- Handle deferred probe; twl6040
- Improve accuracy of headphone detect; arizona
- Unnecessary MODULE_ALIAS() removal; bcm590xx, rt5033
- Remove unused code; htc-i2cpld, arizona, pcf50633-irq, sec-core
- Simplify code; kempld, rts5209, da903x, lm3533, da9052, arizona
- Remove #iffery; arizona
- DT binding adaptions; many
Bug Fixes:
- Fix possible NULL pointer dereference; wm831x, tps6105x
- Fix 64bit bug; intel_soc_pmic_bxtwc
- Fix signedness issue; arizona"
* tag 'mfd-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
bindings: mfd: s2mps11: Add documentation for s2mps15 PMIC
mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk children
extcon: arizona: Add extcon specific device tree binding document
MAINTAINERS: Add binding docs for Cirrus Logic/Wolfson Arizona devices
mfd: arizona: Remove bindings covered in new subsystem specific docs
mfd: rt5033: Add RT5033 Flash led sub device
mfd: lpss: Add Intel Broxton PCI IDs
mfd: lpss: Add Broxton ACPI IDs
mfd: arizona: Signedness bug in arizona_runtime_suspend()
mfd: axp20x: Add a cell for the power button part of the, axp288 PMICs
mfd: dt-bindings: Document pulled down WRSTBI pin on S2MPS1X
mfd: sec-core: Disable buck voltage reset on watchdog falling edge
mfd: sec-core: Dump PMIC revision to find out the HW
mfd: arizona: Use correct type ID for device tree config
mfd: arizona: Remove use of codec build config #ifdefs
mfd: arizona: Simplify adding subdevices
mfd: arizona: Downgrade type mismatch messages to dev_warn
mfd: arizona: Factor out checking of jack detection state
mfd: arizona: Factor out DCVDD isolation control
mfd: Make TPS6105X select REGMAP_I2C
...
|
||
|
Linus Torvalds
|
52787e91bf |
regulator: Updates for v4.4
This is quite a quiet release in terms of volume of patches but it
includes a couple of really nice core changes - the work Sascha has done
in particular is something I've wanted to get done for a long time but
just never got round to myself. Highlights include:
- Support from Sascha Hauer for setting the voltage of parent supplies
based on requests from their children. This is used both to allow
set_voltage() to work through a dumb switch and to improve the
efficiency of systems where DCDCs are used to supply LDOs by minimising
the voltage drop over the LDOs.
- Removal of regulator_list by Tomeu Vizoso, meaning we're not
duplicating the device list maintained by the driver core.
- Support for Wolfson/Cirrus WM8998 and WM1818.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWOez1AAoJECTWi3JdVIfQZSoH/jk2EQCG7hSIY6qVviHh+zQI
TWULXDnldyfT4eCYNAhwe/oQjFs7ngPXz9UpMAQwtWfWNoLBifF+Y5+X413nHY82
pKoRd+DQ1sIzGZb2YB0kS22Zg49Jilgv3y2Cw0aZuL7aqq7CEUGN3itEeWxqW9j8
a1ORD4d2zgki4gK9fUBTiur/dIhMn+8Gi4CmBvujsSCQR4Z5UNOjiodTU0NONiBX
znejoAoLJXzAyAoWN+p6sEvi9Gpx4QTV6tBOo56WPlzBgTX2qOFhhmJiQQ1rIJOv
MucgNn+cocarWfMyQwvqa0CL4ufjJm2DcYoIhfc2jZip/mAeqcbxpj5bxWzaLec=
=CX2S
-----END PGP SIGNATURE-----
Merge tag 'regulator-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is quite a quiet release in terms of volume of patches but it
includes a couple of really nice core changes - the work Sascha has
done in particular is something I've wanted to get done for a long
time but just never got round to myself.
Highlights include:
- Support from Sascha Hauer for setting the voltage of parent
supplies based on requests from their children. This is used both
to allow set_voltage() to work through a dumb switch and to improve
the efficiency of systems where DCDCs are used to supply LDOs by
minimising the voltage drop over the LDOs.
- Removal of regulator_list by Tomeu Vizoso, meaning we're not
duplicating the device list maintained by the driver core.
- Support for Wolfson/Cirrus WM8998 and WM1818"
* tag 'regulator-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (29 commits)
regulator: Use regulator_lock_supply() for get_voltage() too
regulator: arizona: Add regulator specific device tree binding document
regulator: stw481x: compile on COMPILE_TEST
regulator: qcom-smd: Correct set_load() unit
regulator: core: Propagate voltage changes to supply regulators
regulator: core: Factor out regulator_map_voltage
regulator: i.MX anatop: Allow supply regulator
regulator: introduce min_dropout_uV
regulator: core: create unlocked version of regulator_set_voltage
regulator: arizona-ldo1: Fix handling of GPIO 0
regulator: da9053: Update regulator for DA9053 BC silicon support
regulator: max77802: Separate sections for nodes and properties
regulator: max77802: Add input supply properties to DT binding doc
regulator: axp20x: set supply names for AXP22X DC1SW/DC5LDO internally
regulator: axp20x: Drop AXP221 DC1SW and DC5LDO regulator supplies from bindings
mfd: tps6105x: Use i2c regmap to access registers
regulator: act8865: add DT binding for property "active-semi,vsel-high"
regulator: act8865: support output voltage by VSET2[] bits
regulator: arizona: add support for WM8998 and WM1814
regulator: core: create unlocked version of regulator_list_voltage
...
|
||
|
Linus Torvalds
|
400c5bd5a5 |
power supply and reset changes for the v4.4 series
* new AXP20X USB Power driver * new Qualcomm SMBB driver * new TPS65217 Charger driver * BQ24257: add BQ24250/BQ24251 support * overhaul bq27x00 battery driver, rename to bq27xxx * misc. fixes and cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCgAGBQJWOn8oAAoJENju1/PIO/qahrEP/RPHXvTxtYv8YvhaFbqcr07x 11gRB8RRthKK5woC3s70QKlMtcHijFeCwKuacut+7tfgK2oZDIm+Bd43Pl93aypU Yk4oTwop5OyrLsGIGiTIPPV9HTwr4q69Or2Q91mqUAUe2wGB5uCuJiJmCowUwfZs piv+ISLSOcH+i1bTx3hQ7h7axsdAlaSz2o1JprZaxm3rM67M8zF1ZHSK7wlpAeBa DiDrtUvEDCeLL8dmCA9xkFV4yFB9T+KNh0730N2RY+zlZS6WjSpzryqwsUWWyQ6h U9gFgcs+DjVaGHuMsIX2zm7xXfXHgUBtXdSQoCBhpSrZsdufMsT/8VQqVZ0yqpXL pQ2EXy63k6tXnXEyAKTA0tAOX/WZNfmmNblkea4JiyZULn7b/WH09waMZUBJqe84 Yn3SatVdGDN4nawsivzdiM3zR9/WTE9R3DmEeAE+g1RRsSraNwWlkzpDXcmnWmbc DoprnjLsDJfqL3/1ysF2V2I4B26Bws73qq6UUjJ4KEGWf8Y1fVawxrbcYmnrvg1K zW/saEgtl70FYqtee/0lIqTpjOZRX/O6QH5i8p7VC8cUzftX0Twc8MvfvpamDywX Cr1Y7pIMEhc6TFUP5lOzx9xJelA5PHJMpAT+02fh6YXMAzCcBUzL113rY5zBrVVl gce0iHDKAybmvww77z1r =0be4 -----END PGP SIGNATURE----- Merge tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - new AXP20X USB Power driver - new Qualcomm SMBB driver - new TPS65217 Charger driver - BQ24257: add BQ24250/BQ24251 support - overhaul bq27x00 battery driver, rename to bq27xxx - misc fixes and cleanups * tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits) power: bq27xxx_battery: Remove unneeded dependency in Kconfig power: bq27xxx_battery: move irq handler to i2c section power: bq27xxx_battery: fix platform probe twl4030_charger: add missing iio dependency power_supply: charger-manager: add missing of_node_put Documentation: power: bq24257: Document exported sysfs entries power: bq24257: Add various device-specific sysfs properties power: bq24257: Allow input current limit sysfs access power: bq24257: Add input DPM voltage threshold setting support power: bq24257: Add over voltage protection setting support power: bq24257: Add SW-based approach for Power Good determination power: bq24257: Allow manual setting of input current limit power: bq24257: Add bit definition for temp sense enable power: bq24257: Add basic support for bq24250/bq24251 dt: power: bq24257-charger: Cover additional devices power: bq24257: Simplify bq24257_power_supply_init() power: bq24257: Use managed power supply register power: bq24257: Streamline input current limit setup power: bq24257: Remove IRQ config through stat-gpios power: bq27xxx_battery: fix signedness bug in bq27xxx_battery_read_health() ... |
||
|
Krzysztof Kozlowski
|
8a97d4287e |
mfd: sec-core: Disable buck voltage reset on watchdog falling edge
The WRSTBI bit (disabled by default but enabled by bootloader), when set, is responsible for resetting voltages to default values of certain bucks on falling edge of Warm Reset Input pin from AP. However on some boards (with S2MPS13) the pin is pulled down so any suspend will effectively trigger the reset of bucks supplying the power to the little and big cores. In the same time when resuming, these bucks must provide voltage greater or equal to voltage before suspend to match the frequency chosen by cpufreq. If voltage (default value of voltage after reset) is lower than one set by cpufreq before suspend, then system will hang during resuming. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Micky Ching
|
ce6a5acc93 |
mfd: rtsx: Add support for rts522A
rts522a(rts5227s) is derived from rts5227, and mainly same with rts5227. Add it to file mfd/rts5227.c to support this chip. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Steve Twiss
|
0386af30d3 |
mfd: da9053: Addition of extra registers for GPIOs 8-13
Definitions for GPIO registers 8, 9, 10, 11, 12 and 13 are added into the register header file. - DA9052_GPIO_8_9_REG 25 - DA9052_GPIO_10_11_REG 26 - DA9052_GPIO_12_13_REG 27 A modification is also made to the MFD core code to define these registers as readable and writable. The functions for da9052_reg_readable() and da9052_reg_writeable() have had their case statements altered to include these new registers. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Qipeng Zha
|
39d047c0b1 |
mfd: add Intel Broxton Whiskey Cove PMIC driver
Add MFD core driver for Intel Broxton Whiskey Cove PMIC, which is specially accessed by hardware IPC, not a generic I2C device Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Qipeng Zha
|
6bb3b3acc3 |
mfd: intel_soc_pmic: Add support for Broxton WC PMIC
IRQ control registers of Intel Broxton Whisky Cove PMIC are separated in two parts, so add secondary IRQ chip. And the new member of device will be used in PMC IPC regmap APIs. Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Charles Keepax
|
9111fa5c40 |
mfd: arizona: Add register bits to support the ANC block
Some Arizona devices have a hardware ANC block present. This patch adds the registers necessary to configure this hardware block. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Krzysztof Kozlowski
|
d785334a0d |
mfd: s2mps11: Add manual shutdown method for Odroid XU3
On Odroid XU3 board (with S2MPS11 PMIC) the PWRHOLD bit in CTRL1 register must be manually set to 0 before initiating power off sequence. One of usual power down methods for Exynos based devices looks like: 1. PWRHOLD pin of PMIC is connected to PSHOLD of Exynos SoC. 2. Exynos holds up this pin during system operation. 3. ACOKB pin of PMIC is pulled up to VBATT and optionally to pin in other device. 4. When PWRHOLD/PSHOLD goes low, the PMIC will turn off the power if ACOKB goes high. On Odroid XU3 family the difference is in (3) - the ACOKB is grounded. This means that PMIC must manually set PWRHOLD field to low and then wait for signal from Application Processor (the usual change in PWRHOLD/PSHOLD pin will actually cut off the power). The patch adds respective binding allowing Odroid XU3 device to be powered off. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Reported-by: Anand Moon <linux.amoon@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Vaibhav Hiremath
|
62a2e63347 |
mfd: 88pm80x: Add 88pm860 chip type support
Add chip identification support for 88PM860 device to the pm80x_chip_mapping table. Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Lee Jones
|
74b533c529 | Merge branches 'ib-extcon-mfd-4.4', 'ib-mfd-i2c-v4.4', 'ib-mfd-power-4.4', 'ib-mfd-regmap-4.4' and 'ib-mfd-regulator-4.4' into ibs-for-mfd-merged | ||
|
Andy Shevchenko
|
98a3be44ff |
mfd: core: redo ACPI matching of the children devices
There is at least one board on the market, i.e. Intel Galileo Gen2, that uses _ADR to distinguish the devices under one actual device. Due to this we have to improve the quirk in the MFD core to handle that board. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> |
||
|
H. Nikolaus Schaller
|
e08e19c331 |
iio:adc: add iio driver for Palmas (twl6035/7) gpadc
This driver code was found as:
|
||
|
Adam Thomson
|
1ac710e08a |
mfd: da9150: Add support for Fuel-Gauge
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Emilio López
|
18800fc7a0 |
platform/chrome: Support reading/writing the vboot context
Some EC implementations include a small nvram space used to store verified boot context data. This patch offers a way to expose this data to userspace. Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Emilio López <emilio.lopez@collabora.co.uk> Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Grigoryev Denis
|
7e50711993 |
mfd: tps6105x: Use i2c regmap to access registers
This patch modifies tps6105x and associated function driver to use regmap instead of operating directly on i2c. Signed-off-by: Denis Grigoryev <grigoryev@fastwel.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Fugang Duan
|
7dc87ff881 |
ARM: imx7d: add imx7d iomux-gpr field define
Add imx7d iomux-gpr field define. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Hans de Goede
|
69fb4dcada |
power: Add an axp20x-usb-power driver
This adds a driver for the usb power_supply bits of the axp20x PMICs. I initially started writing my own driver, before coming aware of Bruno Prémont's excellent earlier RFC with a driver for this. My driver was lacking CURRENT_MAX and VOLTAGE_MIN support Bruno's drvier has, so I've copied the code for those from his driver. Note that the AC-power-supply and battery charger bits will need separate drivers. Each one needs its own devictree child-node so that other devicetree nodes can reference the right power-supply, and thus each one will get its own mfd-cell / platform_device and platform-driver. Cc: Bruno Prémont <bonbons@linux-vserver.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> |
||
|
Charles Keepax
|
b8ba9edb91 |
mfd: arizona: Add TST_CAP bits for headphone detection
On wm5110/8280 some additional settings are required to get accurate measurements at the top end of the headphone detection range. This patch adds the bits required for this. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
||
|
Charles Keepax
|
1ce376897e |
mfd: arizona: Add register bits for general purpose switch
The switch is typically used in conjunction with the MICDET clamp in order to suppress pops and clicks associated with jack insertion. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
||
|
Charles Keepax
|
e76e397a7f |
mfd: arizona: Add registers for ADC microphone detection
The newer devices support using a software comparison to determine whether a 3/4 pole jack is present. Add the registers necessary for this. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
||
|
Linus Torvalds
|
abebcdfb64 |
sound updates for 4.3-rc1
There are little changes in core part, but lots of development are
found in drivers, especially ASoC. The diffstat shows regmap-
related changes for a slight API additions / changes, and that's all.
Looking at the code size statistics, the most significant addition
is for Intel Skylake. (Note that SKL support is still underway, the
codec driver is missing.) Also STI controller driver is a major
addition as well as a few new codec drivers.
In HD-audio side, there are fewer changes than the past. The
noticeable change is the support of ELD notification from i915
graphics driver. Thus this pull request carries a few changes in
drm/i915.
Other than that, USB-audio got a rewrite of runtime PM code. It
was initiated by lockdep warning, but resulted in a good cleanup in
the end.
Below are the highlights:
Common:
- Factoring out of AC'97 reset code from ASoC into the core helper
- A few regmap API extensions (in case it's not pulled yet)
ASoC:
- New drivers for Cirrus CS4349, GTM601, InvenSense ICS43432, Realtek
RT298 and ST STI controllers
- Machine drivers for Rockchip systems with MAX98090 and RT5645 and
RT5650
- Initial driver support for Intel Skylake devices
- Lots of rsnd cleanup and enhancements
- A few DAPM fixes and cleanups
- A large number of cleanups in various drivers (conversion and
standardized to regmap, component) mostly by Lars-Peter and Axel
HD-audio:
- Extended HD-audio core for Intel Skylake controller support
- Quirks for Dell headsets, Alienware 15
- Clean up of pin-based quirk tables for Realtek codecs
- ELD notifier implenetation for Intel HDMI/DP
USB-audio:
- Refactor runtime PM code to make lockdep happier
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/sXs
-----END PGP SIGNATURE-----
Merge tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are little changes in core part, but lots of development are
found in drivers, especially ASoC. The diffstat shows regmap-related
changes for a slight API additions / changes, and that's all.
Looking at the code size statistics, the most significant addition is
for Intel Skylake. (Note that SKL support is still underway, the
codec driver is missing.) Also STI controller driver is a major
addition as well as a few new codec drivers.
In HD-audio side, there are fewer changes than the past. The
noticeable change is the support of ELD notification from i915
graphics driver. Thus this pull request carries a few changes in
drm/i915.
Other than that, USB-audio got a rewrite of runtime PM code. It was
initiated by lockdep warning, but resulted in a good cleanup in the
end.
Below are the highlights:
Common:
- Factoring out of AC'97 reset code from ASoC into the core helper
- A few regmap API extensions (in case it's not pulled yet)
ASoC:
- New drivers for Cirrus CS4349, GTM601, InvenSense ICS43432, Realtek
RT298 and ST STI controllers
- Machine drivers for Rockchip systems with MAX98090 and RT5645 and
RT5650
- Initial driver support for Intel Skylake devices
- Lots of rsnd cleanup and enhancements
- A few DAPM fixes and cleanups
- A large number of cleanups in various drivers (conversion and
standardized to regmap, component) mostly by Lars-Peter and Axel
HD-audio:
- Extended HD-audio core for Intel Skylake controller support
- Quirks for Dell headsets, Alienware 15
- Clean up of pin-based quirk tables for Realtek codecs
- ELD notifier implenetation for Intel HDMI/DP
USB-audio:
- Refactor runtime PM code to make lockdep happier"
* tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits)
drm/i915: Add locks around audio component bind/unbind
drm/i915: Drop port_mst_index parameter from pin/eld callback
ALSA: hda - Fix missing inline for dummy snd_hdac_set_codec_wakeup()
ALSA: hda - Wake the codec up on pin/ELD notify events
ALSA: hda - allow codecs to access the i915 pin/ELD callback
drm/i915: Call audio pin/ELD notify function
drm/i915: Add audio pin sense / ELD callback
ASoC: zx296702-i2s: Fix resource leak when unload module
ASoC: sti_uniperif: Ensure component is unregistered when unload module
ASoC: au1x: psc-i2s: Convert to use devm_ioremap_resource
ASoC: sh: dma-sh7760: Convert to devm_snd_soc_register_platform
ASoC: spear_pcm: Use devm_snd_dmaengine_pcm_register to fix resource leak
ALSA: fireworks/bebob/dice/oxfw: fix substreams counting at vmalloc failure
ASoC: Clean up docbook warnings
ASoC: txx9: Convert to devm_snd_soc_register_platform
ASoC: pxa: Convert to devm_snd_soc_register_platform
ASoC: nuc900: Convert to devm_snd_soc_register_platform
ASoC: blackfin: Convert to devm_snd_soc_register_platform
ASoC: au1x: Convert to devm_snd_soc_register_platform
ASoC: qcom: Constify asoc_qcom_lpass_cpu_dai_ops
...
|
||
|
Linus Torvalds
|
8bd8fd0a29 |
- New Device Support
- New Clocksource driver from ST
- New MFD/ACPI/DMA drivers for Intel's Sunrisepoint PCH based platforms
- Add support for Arizona WM8998 and WM1814
- Add support for Dialog Semi DA9062 and DA9063
- Add support for Kontron COMe-bBL6 and COMe-cBW6
- Add support for X-Powers AXP152
- Add support for Atmel, many
- Add support for STMPE, many
- Add support for USB in X-Powers AXP22X
- Core Frameworks
- New Base API to traverse devices and their children in reverse order
- Bug Fixes
- Fix race between runtime-suspend and IRQs
- Obtain platform data form more reliable source
- Fix-ups
- Constifying things
- Variable signage changes
- Kconfig depends|selects changes
- Make use of BIT() macro
- Do not supply .owner attribute in *_driver structures
- MAINTAINERS entries
- Stop using set_irq_flags()
- Start using irq_set_chained_handler_and_data()
- Export DT device ID structures
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2blS
-----END PGP SIGNATURE-----
Merge tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- New Clocksource driver from ST
- New MFD/ACPI/DMA drivers for Intel's Sunrisepoint PCH based platforms
- Add support for Arizona WM8998 and WM1814
- Add support for Dialog Semi DA9062 and DA9063
- Add support for Kontron COMe-bBL6 and COMe-cBW6
- Add support for X-Powers AXP152
- Add support for Atmel, many
- Add support for STMPE, many
- Add support for USB in X-Powers AXP22X
Core Frameworks:
- New Base API to traverse devices and their children in reverse order
Bug Fixes:
- Fix race between runtime-suspend and IRQs
- Obtain platform data form more reliable source
Fix-ups:
- Constifying things
- Variable signage changes
- Kconfig depends|selects changes
- Make use of BIT() macro
- Do not supply .owner attribute in *_driver structures
- MAINTAINERS entries
- Stop using set_irq_flags()
- Start using irq_set_chained_handler_and_data()
- Export DT device ID structures"
* tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: jz4740-adc: Init mask cache in generic IRQ chip
mfd: cros_ec: spi: Add OF match table
mfd: stmpe: Add OF match table
mfd: max77686: Split out regulator part from the DT binding
mfd: Add DT binding for Maxim MAX77802 IC
mfd: max77686: Use a generic name for the PMIC node in the example
mfd: max77686: Don't suggest in binding to use a deprecated property
mfd: Add MFD_CROS_EC dependencies
mfd: cros_ec: Remove CROS_EC_PROTO dependency for SPI and I2C drivers
mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs
mfd: axp20x: Add missing registers, and mark more registers volatile
mfd: arizona: Fixup some formatting/white space errors
mfd: wm8994: Fix NULL pointer exception on missing pdata
of: Add vendor prefix for Nuvoton
mfd: mt6397: Implement wake handler and suspend/resume to handle wake up event
mfd: atmel-hlcdc: Add support for new SoCs
mfd: Export OF module alias information in missing drivers
mfd: stw481x: Export I2C module alias information
mfd: da9062: Support for the DA9063 OnKey in the DA9062 core
mfd: max899x: Avoid redundant irq_data lookup
...
|
||
|
Linus Torvalds
|
50686e8a3a |
ARM: SoC platform updates for v4.3
New or improved SoC support: - Addition of support for Atmel's SAMA5D2 SoC - Addition of Freescale i.MX6UL - Improved support of TI's DM814x platform - Misc fixes and improvements for RockChip platforms - Marvell MVEBU suspend/resume support A few driver changes that ideally would belong in the drivers branch are also here (acked by appropriate maintainers): - Power key input driver for Freescale platforms (svns) - RTC driver updates for Freescale platforms (svns/mxc) - Clk fixes for TI DM814/816X + a bunch of other changes for various platforms -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJV5Mo6AAoJEIwa5zzehBx3VnMP/28LFJVUjIbd2xjJBo2gbSwV jN7uGlTkKU+1kHjZqnUPuirlBxBzsXKgRfBvCoeu0cPOggwmFcaF915/HHPz7xuz vTP7k98+Y5nSXScIohWkWCdZTpKKjve4sn74rXmiNakTUiuaHf5lKut/m7ldVrWd hN1o9W4LN+5O1mOYbc9ZD98v3bkDb6eu+a22oK7qemXiEiQi+NIMoDx+IR2bd4pA FeDaW7sOFWTEYU/p+M5nZNvI3n53P0/mlB5rPRiAYRjhQf9DrWHm5G7HdnMkUkgo /s8/QlVjBkJwhkY0TqpwtHY23JjSSB6UtCnXzb1eVAkX1nJN6PJQpcpCz1zJhd9q +sJ2k1zEvrfomJCK7/iZ1ubQE09KlJLEeb8xi5xCwD0MBOBAYC31bovDVAswCitV 8NHnfltEG+wCMyX955eqqGkVxkcw8sJMJUK5A95aK6w+vKqjd7gUgLJjXFC1u4eN ECuVVUf1hVmUEmM799CDayTlfGDt4oGLmHGao+SiSCVc1XbG9HkWr7Lcgr6u9UHr lNv3RIe6Axb85xxIU0/9hqLHrtB85uEQjjlbnQx3o7u8RsSOeaiZvCz4BzcjP9E1 VGyD6zkRWhuDiMFlPVXiAX0qIH5xSjIWkC0wPNJNy8eWFH9tkfGL0mOlLbl09oGR gtuvOrjbF/BhILkPw38y =8T5Z -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "New or improved SoC support: - add support for Atmel's SAMA5D2 SoC - add support for Freescale i.MX6UL - improved support for TI's DM814x platform - misc fixes and improvements for RockChip platforms - Marvell MVEBU suspend/resume support A few driver changes that ideally would belong in the drivers branch are also here (acked by appropriate maintainers): - power key input driver for Freescale platforms (svns) - RTC driver updates for Freescale platforms (svns/mxc) - clk fixes for TI DM814/816X + a bunch of other changes for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: rockchip: pm: Fix PTR_ERR() argument ARM: imx: mach-imx6ul: Fix allmodconfig build clk: ti: fix for definition movement ARM: uniphier: drop v7_invalidate_l1 call at secondary entry memory: kill off set_irq_flags usage rtc: snvs: select option REGMAP_MMIO ARM: brcmstb: select ARCH_DMA_ADDR_T_64BIT for LPAE ARM: BCM: Enable ARM erratum 798181 for BRCMSTB ARM: OMAP2+: Fix power domain operations regression caused by 81xx ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend ARM: rockchip: set correct stabilization thresholds in suspend ARM: rockchip: rename osc_switch_to_32k variable ARM: imx6ul: add fec MAC refrence clock and phy fixup init ARM: imx6ul: add fec bits to GPR syscon definition rtc: mxc: add support of device tree dt-binding: document the binding for mxc rtc rtc: mxc: use a second rtc clock ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback soc: mediatek: Fix SCPSYS compilation ARM: at91/soc: add basic support for new sama5d2 SoC ... |
||
|
Linus Torvalds
|
cf9d615f7f |
regulator: Updates for v4.3
The biggest changes in the core this time around have been some
refactorings that move us towards being able to drop the list of
regulators maintained by the core and instead just use the driver model
list maintained for the class devices for regulators which will make the
code smaller and avoid some potential bugs. Otherwise another fairly
quiet release for the regulator API, highlights include:
- A new API for setting voltages based on a minimum, target, maximum
triplet.
- Support for continuous voltage ranges rather than tables of explicit
steps in the PWM regulator, requiring less explicit configuration.
- New driver support for Dialog DA9215, Maxim 77843, Mediatek MT6311
and Qualcomm RPM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV5DCWAAoJECTWi3JdVIfQDgYH/3mNwtRcwslt8M1L8lzRVyf1
gRrJY5r4EUOcqqsLnQvDHdjgO2yowEolEd3Hd/GElZqzeFgwXaQ62kHwgqnvOt9k
O0l99FbU6ECpB56tSENrV1lfvBTlld9bEhq9NhxvNiWAdpGPqIcjvXfSH28GssJ0
NGr4Yt/A1DG6GsOWxKSODX56WJXJn4emKx3vHH+leUClNWwQVK6JunTmj5IPKLxW
K94Ke41L3JgAy18TLqvFNlTAC22QaHFaM8ul9v7gnPW+S8Bx15MCQz16rMkGViZV
c/DyCu69qCVFLI1svRrvB5oq700QT0GT6jANCVmw+CrkIkESwjS39kX861H6hk8=
=vrVx
-----END PGP SIGNATURE-----
Merge tag 'regulator-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The biggest changes in the core this time around have been some
refactorings that move us towards being able to drop the list of
regulators maintained by the core and instead just use the driver
model list maintained for the class devices for regulators which will
make the code smaller and avoid some potential bugs.
Otherwise another fairly quiet release for the regulator API,
highlights include:
- a new API for setting voltages based on a minimum, target, maximum
triplet
- support for continuous voltage ranges rather than tables of
explicit steps in the PWM regulator, requiring less explicit
configuration
- new driver support for Dialog DA9215, Maxim 77843, Mediatek MT6311
and Qualcomm RPM"
* tag 'regulator-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (70 commits)
regulator: mt6311: fix platform_no_drv_owner.cocci warnings
regulator: ltc3589: Remove unnecessary MODULE_ALIAS()
regulator: ad5398: Remove unnecessary MODULE_ALIAS()
regulator: pfuze100: Remove unnecessary MODULE_ALIAS()
regulator: core: use debug level print in regulator_check_drms
regulator: lp872x: handle error case
regulator: lp872x: use the private data instead of updating I2C device platform data
regulator: isl9305: Export OF module alias information
regulators: max77693: register driver earlier to avoid deferred probe
regulator: qcom_smd: Set n_voltages for pm8941_lnldo
regulator: core: Use IS_ERR_OR_NULL()
regulator: core: Define regulator_set_voltage_triplet()
regulator: Regulator driver for the Qualcomm RPM
regulator: pbias: Fix broken pbias disable functionality
regulator: core: Spelling fix
regulator: core: Use class device list for regulator_list in late init
regulator: core: Move more deallocation into class unregister
regulator: core: Reduce rdev locking region when releasing regulator
Input: Remove the max77843 haptic driver
Input: max77693: Add support for Maxim 77843
...
|
||
|
Bruno Prémont
|
553ed4b5df |
mfd: axp20x: Add missing registers, and mark more registers volatile
Add an extra set of registers which is necessary tu support the PMICs battery charger function, and mark registers which contain status bits, gpio status, and adc readings as volatile. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Henry Chen
|
f3151ab4a7 |
mfd: mt6397: Implement wake handler and suspend/resume to handle wake up event
Implement .irq_set_wake() to get who is wakeup source and setup on suspend/reumse. Enable mt6393_irq as wake up source properly to pinctrl by enable_irq_wake()/enable_irq_wake(). Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Steve Twiss
|
03b4271042 |
mfd: da9063: Fix missing DA9063_M_DVC_RDY mask bit
Fix a missing DVC_RDY interrupt mask in struct regmap_irq definition. The original submission of this driver did not contain all interrupt masking definitions in the struct regmap_irq contained in the file da9063-irq.c The solution is to add a DA9063_IRQ_DVC_RDY entry to enum da9063_irqs list and to add the corresponding values to compensate for the missing mask bit in the static const struct regmap_irq da9063_irqs[] table. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Adam Ward <adam.ward.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Michal Suchanek
|
d8d79f8f60 |
mfd: axp20x: Add axp152 support
The axp152 is a stripped down version of the axp202 pmic with the battery charging function removed as it is intended for top-set boxes. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
S Twiss
|
9b40b030c4 |
mfd: da9062: Supply core driver
Add MFD core driver support for DA9062 Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Richard Fitzgerald
|
6887b042c5 |
mfd: arizona: Add support for WM8998 and WM1814
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Vaibhav Hiremath
|
bc00d68f2f |
mfd: 880m80x: Make use of BIT() macro
Instead of hard coding the shift for bit definition, use BIT() macro. Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Charles Keepax
|
00b6e9ff01 |
mfd: arizona: Update several pdata members to unsigned
Device tree and ACPI primarily deal with unsigned ints, many of the pdata members in the Arizona driver are signed ints but are only ever assigned positive values. Changing these pdata fields to unsigned ints avoids us having to choose between overly verbose code and Sparse warnings. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |