Prior to commit 2a61f4747e ("stack-protector: test compiler capability
in Kconfig and drop AUTO mode"), the stack protector was configured by
the choice of NONE, REGULAR, STRONG, AUTO.
tiny.config needed to explicitly set NONE because the default value of
choice, AUTO, did not produce the tiniest kernel.
Now that there are only two boolean symbols, STACKPROTECTOR and
STACKPROTECTOR_STRONG, they are naturally disabled by "make
allnoconfig", which "make tinyconfig" is based on. Remove unnecessary
lines from the tiny.config fragment file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 2a61f4747e ("stack-protector: test compiler capability in
Kconfig and drop AUTO mode") replaced the 'choice' with two boolean
symbols, so CC_STACKPROTECTOR_NONE no longer exists.
Prior to commit 2bc2f688fd ("Makefile: move stack-protector
availability out of Kconfig"), this line was like this:
depends on X86_32 && !CC_STACKPROTECTOR
The CC_ prefix was dropped by commit 050e9baa9d ("Kbuild: rename
CC_STACKPROTECTOR[_STRONG] config variables"), so the dependency now
should be:
depends on X86_32 && !STACKPROTECTOR
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now sctp GSO uses skb_gro_receive() to append the data into head
skb frag_list. However it actually only needs very few code from
skb_gro_receive(). Besides, NAPI_GRO_CB has to be set while most
of its members are not needed here.
This patch is to add sctp_packet_gso_append() to build GSO frames
instead of skb_gro_receive(), and it would avoid many unnecessary
checks and make the code clearer.
Note that sctp will use page frags instead of frag_list to build
GSO frames in another patch. But it may take time, as sctp's GSO
frames may have different size. skb_segment() can only split it
into the frags with the same size, which would break the border
of sctp chunks.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd had sent this patch to the KVM mailing list, but it slipped through
the cracks of maintainers hand-off, and therefore wasn't included in
the pull request.
The same issue had been fixed by Linus in commit dbee3d0 ("KVM: x86:
VMX: fix build without hyper-v", 2018-06-12) as a self-described
"quick-and-hacky build fix". However, checking the compile-time
configuration symbol with IS_ENABLED is cleaner and it is enough to
avoid the link error, so switch to Arnd's solution.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Rewritten commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An UAC3 BADD device may also include an interrupt status pipe
to report changes on the HEADSET ADAPTER terminals. The creation
of the status pipe is dependent on the device reporting that it
has it.
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HEADSET ADAPTER profile for BADD devices is meant to support
Insertion Control for the Input and Output Terminals of the headset.
This patch defines the BADD inferred input and output terminals and
builds the connector controls.
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Change build_connector_control() and get_connector_control_name()
so they take `struct usb_mixer_interface` as input argument instead
of `struct mixer_build`.
This is preliminary work to add support for connectors control
for UAC3 BADD devices. No functional change.
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When pci_ioremap_bar fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling pci_ioremap_bar.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When snd_ctl_add fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling snd_ctl_add.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix typo in sentence about min value calculation.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The reconnect path is calling the init routines to clear a queue
structure. But the queue structure has state that perhaps needs
to persist as long as the controller is live.
Remove the nvme_fc_init_queue() calls on reconnect.
The nvme_fc_free_queue() calls will clear state bits and reset
any relevant queue state for a new connection.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The reinit_request routine is not necessary. Remove support for the
op callback.
As all that nvme_reinit_tagset() does is itterate and call the
reinit routine, it too has no purpose. Remove the call.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We can currently call the timeout handler again on a request that has
already been handed over to the timeout handler. Prevent that with a new
flag.
Fixes: 12f5b931 ("blk-mq: Remove generation seqeunce")
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The pstore conversion to timespec64 introduces its own method of passing
seconds into sscanf() and sprintf() type functions to work around the
timespec64 definition on 64-bit systems that redefine it to 'timespec'.
That hack is now finally getting removed, but that means we get a (harmless)
warning once both patches are merged:
fs/pstore/ram.c: In function 'ramoops_read_kmsg_hdr':
fs/pstore/ram.c:39:29: error: format '%ld' expects argument of type 'long int *', but argument 3 has type 'time64_t *' {aka 'long long int *'} [-Werror=format=]
#define RAMOOPS_KERNMSG_HDR "===="
^~~~~~
fs/pstore/ram.c:167:21: note: in expansion of macro 'RAMOOPS_KERNMSG_HDR'
This removes the pstore specific workaround and uses the same method that
we have in place for all other functions that print a timespec64.
Related to this, I found that the kasprintf() output contains an incorrect
nanosecond values for any number starting with zeroes, and I adapt the
format string accordingly.
Link: https://lkml.org/lkml/2018/5/19/115
Link: https://lkml.org/lkml/2018/5/16/1080
Fixes: 0f0d83b99ef7 ("pstore: Convert internal records to timespec64")
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull the timespec64 conversion from Deepa Dinamani:
"The series aims to switch vfs timestamps to use
struct timespec64. Currently vfs uses struct timespec,
which is not y2038 safe.
The flag patch applies cleanly. I've not seen the timestamps
update logic change often. The series applies cleanly on 4.17-rc6
and linux-next tip (top commit: next-20180517).
I'm not sure how to merge this kind of a series with a flag patch.
We are targeting 4.18 for this.
Let me know if you have other suggestions.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
I've tried to keep the conversions with the script simple, to
aid in the reviews. I've kept all the internal filesystem data
structures and function signatures the same.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions."
I've pulled it into a branch based on top of the NFS changes that
are now in mainline, so I could resolve the non-obvious conflict
between the two while merging.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix the issue that SCLK&MCLK can't be set higher than dpm7 when
OD is enabled in SMU7.
v2: fix warning (Alex)
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Rex Zhu<rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current code follows the framework that has been in the transports
from the beginning where initial link-side controller connect occurs
as part of "creating the controller". Thus that first connect fully
talks to the controller and obtains values that can then be used in
for blk-mq setup, etc. It also means that everything about the
controller is fully know before the "create controller" call returns.
This has several weaknesses:
- The initial create_ctrl call made by the cli will block for a long
time as wire transactions are performed synchronously. This delay
becomes longer if errors occur or connectivity is lost and retries
need to be performed.
- Code wise, it means there is a separate connect path for initial
controller connect vs the (same) steps used in the reconnect path.
- And as there's separate paths, it means there's separate error
handling and retry logic. It also plays havoc with the NEW state
(should transition out of it after successful initial connect) vs
the RESETTING and CONNECTING (reconnect) states that want to be
transitioned to on error.
- As there's separate paths, to recover from errors and disruptions,
it requires separate recovery/retry paths as well and can severely
convolute the controller state.
This patch reworks the fc transport to use the same connect paths
for the initial connection as it uses for reconnect. This makes a
single path for error recovery and handling.
This patch:
- Removes the driving of the initial connect and replaces it with
a state transition to CONNECTING and initiating the reconnect
thread. A dummy state transition of RESETTING had to be traversed
as a direct transtion of NEW->CONNECTING is not allowed. Given
that the controller is "new", the RESETTING transition is a simple
no-op. Once in the reconnecting thread, the normal behaviors of
ctrl_loss_tmo (max_retries * connect_delay) and dev_loss_tmo will
apply before the controller is torn down.
- Only if the state transitions couldn't be traversed and the
reconnect thread not scheduled, will the controller be torn down
while in create_ctrl.
- The prior code used the controller state of NEW to indicate
whether request queues had been initialized or not. For the admin
queue, the request queue is always created, so there's no need to
check a state. For IO queues, change to tracking whether a successful
io request queue create has occurred (e.g. 1st successful connect).
- The initial controller id is initialized to the dynamic controller
id used in the initial connect message. It will be overwritten by
the real controller id once the controller is connected on the wire.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This is a set of minor (and safe changes) that didn't make the initial
pull request plus some bug fixes.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWyHBVCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishTkjAPoDF71y
5+w0pim7HQvyo02GxKRWyYzkibZsTfNQ49Yo6wD9EhKp1OD4TIrO1ey3fHpCcYry
CHfUIClnev6hiqDBDrI=
=xJ+K
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of minor (and safe changes) that didn't make the initial
pull request plus some bug fixes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Mask off Scope bits in retry delay
scsi: qla2xxx: Fix crash on qla2x00_mailbox_command
scsi: aic7xxx: aic79xx: fix potential null pointer dereference on ahd
scsi: mpt3sas: Add an I/O barrier
scsi: qla2xxx: Fix setting lower transfer speed if GPSC fails
scsi: hpsa: disable device during shutdown
scsi: sd_zbc: Fix sd_zbc_check_zone_size() error path
scsi: aacraid: remove bogus GFP_DMA32 specifies
Several incremental improvements including new keycodes, new models, new
quirks, and related documentation. Adds LED platform driver activation
for Mellanox systems. Some minor optimizations and cleanups. Includes
several bug fixes, message silencing, mostly minor.
The following commits were previously merged during the 4.17 RC cycle:
- 06b8b00b33 platform/x86: asus-wireless: Fix NULL pointer dereference
- 6ed66c3ce0 platform/x86: Kconfig: Fix dell-laptop dependency chain.
- 74783c99bf platform/x86: DELL_WMI use depends on instead of select for DELL_SMBIOS
- cf48bf9eee platform/x86: asus-wmi: Fix NULL pointer dereference
The following is an automated git shortlog grouped by driver:
acer-wmi:
- add another KEY_POWER keycode
apple-gmux:
- fix gmux_get_client_id()'s return type
asus-laptop:
- Simplify getting .drvdata
asus-wireless:
- Fix format specifier
dell-laptop:
- Fix keyboard backlight timeout on XPS 13 9370
dell-smbios:
- Match on www.dell.com in OEM strings too
dell-wmi:
- Ignore new rfkill and fn-lock events
- Set correct keycode for Fn + left arrow
fujitsu-laptop:
- Simplify soft key handling
ideapad-laptop:
- Add E42-80 to no_hw_rfkill
- Add fn-lock setting
- Add MIIX 720-12IKB to no_hw_rfkill
lib/string_helpers:
- Add missed declaration of struct task_struct
intel_scu_ipc:
- Replace mdelay with usleep_range in intel_scu_ipc_i2c_cntrl
mlx-platform:
- Add LED platform driver activation
platform/mellanox:
- Add new ODM system types to mlx-platform
- mlxreg-hotplug: add extra cycle for hotplug work queue
- mlxreg-hotplug: Document fixes for hotplug private data
platform_data/mlxreg:
- Document fixes for hotplug device
silead_dmi:
- Add entry for Chuwi Hi8 tablet touchscreen
- Add touchscreen info for the Onda V891w tablet
- Add info for the PoV mobii TAB-P800W (v2.0)
- Add touchscreen info for the Jumper EZpad 6 Pro
thinkpad_acpi:
- silence false-positive-prone pr_warn
- do not report thermal sensor state for tablet mode switch
- silence HKEY 0x6032, 0x60f0, 0x6030
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbIFzqAAoJEKbMaAwKp3644JcIAJ8iBMobacNWjIJvPJ8ytwLE
NUP7/W/8NUXkwnxXzURorlnoO6Uj4+54c+QfO+HQV/+Y46fJaX9x2tWRtcEkpJU3
L6c59kYAMlu5rN5ekCcQex4FKL8Pd7q6QpF8KZtP8gw2ujUEeGA1m/qcTmUlkOQF
AFfbSFJtmMOinbL5ufkaW7Gu91EVFhuvgIoK/XdOhwAbyYAPEbtttKlUjkZGx6GU
iJbpimcmdtfXBqMzvpOHw/4EUXLwgDVr1F8PdGmvEHyK45SHIZcK936Ihiq+CjVA
USFKZhMMYU4sifI77pIP9Trftm+FdaLnPumGVj836OMp1+k10YBy1hDIGwI6i68=
=+O74
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.18-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"Several incremental improvements including new keycodes, new models,
new quirks, and related documentation. Adds LED platform driver
activation for Mellanox systems. Some minor optimizations and
cleanups. Includes several bug fixes, message silencing, mostly minor
Automated summary:
acer-wmi:
- add another KEY_POWER keycode
apple-gmux:
- fix gmux_get_client_id()'s return type
asus-laptop:
- Simplify getting .drvdata
asus-wireless:
- Fix format specifier
dell-laptop:
- Fix keyboard backlight timeout on XPS 13 9370
dell-smbios:
- Match on www.dell.com in OEM strings too
dell-wmi:
- Ignore new rfkill and fn-lock events
- Set correct keycode for Fn + left arrow
fujitsu-laptop:
- Simplify soft key handling
ideapad-laptop:
- Add E42-80 to no_hw_rfkill
- Add fn-lock setting
- Add MIIX 720-12IKB to no_hw_rfkill
lib/string_helpers:
- Add missed declaration of struct task_struct
intel_scu_ipc:
- Replace mdelay with usleep_range in intel_scu_ipc_i2c_cntrl
mlx-platform:
- Add LED platform driver activation
platform/mellanox:
- Add new ODM system types to mlx-platform
- mlxreg-hotplug: add extra cycle for hotplug work queue
- mlxreg-hotplug: Document fixes for hotplug private data
platform_data/mlxreg:
- Document fixes for hotplug device
silead_dmi:
- Add entry for Chuwi Hi8 tablet touchscreen
- Add touchscreen info for the Onda V891w tablet
- Add info for the PoV mobii TAB-P800W (v2.0)
- Add touchscreen info for the Jumper EZpad 6 Pro
thinkpad_acpi:
- silence false-positive-prone pr_warn
- do not report thermal sensor state for tablet mode switch
- silence HKEY 0x6032, 0x60f0, 0x6030"
* tag 'platform-drivers-x86-v4.18-1' of git://git.infradead.org/linux-platform-drivers-x86: (30 commits)
platform/x86: silead_dmi: Add entry for Chuwi Hi8 tablet touchscreen
platform/x86: dell-laptop: Fix keyboard backlight timeout on XPS 13 9370
platform/x86: dell-wmi: Ignore new rfkill and fn-lock events
platform/x86: mlx-platform: Add LED platform driver activation
platform/mellanox: Add new ODM system types to mlx-platform
platform/mellanox: mlxreg-hotplug: add extra cycle for hotplug work queue
platform/x86: ideapad-laptop: Add E42-80 to no_hw_rfkill
platform/x86: silead_dmi: Add touchscreen info for the Onda V891w tablet
platform/x86: silead_dmi: Add info for the PoV mobii TAB-P800W (v2.0)
platform/x86: silead_dmi: Add touchscreen info for the Jumper EZpad 6 Pro
platform/x86: asus-wireless: Fix format specifier
platform/x86: asus-wmi: Fix NULL pointer dereference
platform/x86: dell-wmi: Set correct keycode for Fn + left arrow
platform/x86: acer-wmi: add another KEY_POWER keycode
platform/x86: ideapad-laptop: Add fn-lock setting
platform/x86: ideapad-laptop: Add MIIX 720-12IKB to no_hw_rfkill
lib/string_helpers: Add missed declaration of struct task_struct
platform/x86: DELL_WMI use depends on instead of select for DELL_SMBIOS
platform/mellanox: mlxreg-hotplug: Document fixes for hotplug private data
platform_data/mlxreg: Document fixes for hotplug device
...
This contains a couple of fixes and cleanups for the Meson and ACPI/LPSS
drivers as well as capture support for STM32. Note that given the cross-
subsystem changes, the STM32 patches were merged through the MFD and PWM
trees, both sharing an immutable branch.
-----BEGIN PGP SIGNATURE-----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=ZED5
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a couple of fixes and cleanups for the Meson and
ACPI/LPSS drivers as well as capture support for STM32.
Note that given the cross- subsystem changes, the STM32 patches were
merged through the MFD and PWM trees, both sharing an immutable
branch"
* tag 'pwm/for-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: stm32: Fix build warning with CONFIG_DMA_ENGINE disabled
pwm: stm32: Enforce dependency on CONFIG_MFD_STM32_TIMERS
ACPI / LPSS: Add missing prv_offset setting for byt/cht PWM devices
pwm: lpss: platform: Save/restore the ctrl register over a suspend/resume
dt-bindings: mfd: stm32-timers: Add support for dmas
pwm: simplify getting .drvdata
pwm: meson: Fix allocation of PWM channel array
Pull i2c updates from Wolfram Sang:
- mainly feature additions to drivers (stm32f7, qup, xlp9xx, mlxcpld, ...)
- conversion to use the i2c_8bit_addr_from_msg macro consistently
- move includes to platform_data
- core updates to allow the (still in review) I3C subsystem to connect
- and the regular share of smaller driver updates
* 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (68 commits)
i2c: qup: fix building without CONFIG_ACPI
i2c: tegra: Remove suspend-resume
i2c: imx-lpi2c: Switch to SPDX identifier
i2c: mxs: Switch to SPDX identifier
i2c: busses: make use of i2c_8bit_addr_from_msg
i2c: algos: make use of i2c_8bit_addr_from_msg
i2c: rcar: document R8A77980 bindings
i2c: qup: Add command-line parameter to override SCL frequency
i2c: qup: Correct duty cycle for FM and FM+
i2c: qup: Add support for Fast Mode Plus
i2c: qup: add probe path for Centriq ACPI devices
i2c: robotfuzz-osif: drop pointless test
i2c: robotfuzz-osif: remove pointless local variable
i2c: rk3x: Don't print visible virtual mapping MMIO address
i2c: opal: don't check number of messages in the driver
i2c: ibm_iic: don't check number of messages in the driver
i2c: imx: Switch to SPDX identifier
i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_data
i2c: mux: demux-pinctrl: use proper parent device for demux adapter
i2c: mux: improve error message for failed symlink
...
- add support for mapping secids and using secctxes
- add the ability to get a task's secid
- add support for audit rule filtering
+ Cleanups
- multiple typo fixes
- Convert to use match_string() helper
- update git and wiki locations in AppArmor docs
- improve get_buffers macro by using get_cpu_ptr
- Use an IDR to allocate apparmor secids
+ Bug fixes
- fix '*seclen' is never less than zero
- fix mediation of prlimit
- fix memory leak when deduping profile load
- fix ptrace read check
- fix memory leak of rule on error exit path
-----BEGIN PGP SIGNATURE-----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=EVj2
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2018-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull AppArmor updates from John Johansen:
"Features
- add support for mapping secids and using secctxes
- add the ability to get a task's secid
- add support for audit rule filtering
Cleanups:
- multiple typo fixes
- Convert to use match_string() helper
- update git and wiki locations in AppArmor docs
- improve get_buffers macro by using get_cpu_ptr
- Use an IDR to allocate apparmor secids
Bug fixes:
- fix '*seclen' is never less than zero
- fix mediation of prlimit
- fix memory leak when deduping profile load
- fix ptrace read check
- fix memory leak of rule on error exit path"
* tag 'apparmor-pr-2018-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (21 commits)
apparmor: fix ptrace read check
apparmor: fix memory leak when deduping profile load
apparmor: fix mediation of prlimit
apparmor: fixup secid map conversion to using IDR
apparmor: Use an IDR to allocate apparmor secids
apparmor: Fix memory leak of rule on error exit path
apparmor: modify audit rule support to support profile stacks
apparmor: Add support for audit rule filtering
apparmor: update git and wiki locations in AppArmor docs
apparmor: Convert to use match_string() helper
apparmor: improve get_buffers macro by using get_cpu_ptr
apparmor: fix '*seclen' is never less than zero
apparmor: fix typo "preconfinement"
apparmor: fix typo "independent"
apparmor: fix typo "traverse"
apparmor: fix typo "type"
apparmor: fix typo "replace"
apparmor: fix typo "comparison"
apparmor: fix typo "loosen"
apparmor: add the ability to get a task's secid
...
The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.
That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.
HOWEVER.
It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_CC_STACKPROTECTOR_AUTO=y
and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.
The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one. This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).
This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter patches for your net tree:
1) Fix NULL pointer dereference from nf_nat_decode_session() if NAT is
not loaded, from Prashant Bhole.
2) Fix socket extension module autoload.
3) Don't bogusly reject sets with the NFT_SET_EVAL flag set on from
the dynset extension.
4) Fix races with nf_tables module removal and netns exit path,
patches from Florian Westphal.
5) Don't hit BUG_ON if jumpstack goes too deep, instead hit
WARN_ON_ONCE, from Taehee Yoo.
6) Another NULL pointer dereference from ctnetlink, again if NAT is
not loaded, from Florian Westphal.
7) Fix x_tables match list corruption in xt_connmark module removal
path, also from Florian.
8) nf_conncount doesn't properly deal with conntrack zones, hence
garbage collector may get rid of entries in a different zone.
From Yi-Hung Wei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Gfxoff is already enabled in amdgpu_device_ip_set_powergating_state.
So, no need to enable it again in pp_late_init.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
WARN_ON possible buffer overflow and avoid unnecessary dereference.
v2: change BUG_ON to WARN_ON
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The register field hsas been changed in df 3.6, update to correct setting
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As hw required, soc clock must large than mclk, So we set max soc
clock to OD Max Memory clk.
But on workstation, vbios do not support OD feature, the OD max memory
clock is equal to 0. In this case, driver can support underclocking.
and set od max memory clock to the value in highest memory dpm level.
So the od max memory clock should be less than highest soc clock.
and driver should not change the soc clock.
caused by commit ca57b9b0a156
("drm/amd/pp: Allow underclocking when od table is empty in vbios")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes stale buffer object (bo) usage for cursor plane
Cursor plane's bo operations are handled in DC code.
Currently, atomic_commit() does not handle bo operations
for cursor plane, as a result the bo assigned for cursor
plane in dm_plane_helper_prepare_fb() is not coherent
with the updates to the same made in dc code.This mismatch
leads to "bo" corruption and hence crashes during S3 entry.
This patch cleans up the code which was added as a hack
for 4.9 version only.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current use of result is or'ing in values and checking for
a non-zero result, however, result is not initialized to zero
so it potentially contains garbage to start with. Fix this by
initializing it to the first return from the call to
vega10_program_didt_config_registers.
Detected by cppcheck:
"(error) Uninitialized variable: result"
Fixes: 9b7b8154cd ("drm/amd/powerplay: added didt support for vega10")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Huang Rui <ray.huang@amd.com>
[Fix the subject as Colin's comment]
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The clocks should be adjusted after display configuration changed.
Otherwise, the socclk and memclk may be forced on an unnecessary higher
level.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So, unfortunately I recently made the discovery that in the upstream
kernel, the only reason that amdgpu is not currently suffering from
issues with runtime PM putting the GPU into suspend while it's driving
displays is due to the fact that on most prime systems, we have sound
devices associated with the GPU that hold their own runtime PM ref for
the GPU.
What this means however, is that in the event that there isn't any kind
of sound device active (which can easily be reproduced by building a
kernel with sound drivers disabled), the GPU will fall asleep even when
there's displays active. This appears to be in part due to the fact that
amdgpu has not actually ever relied on it's rpm_idle() function to be
the only thing keeping it running, and normally grabs it's own power
references whenever there are displays active (as can be seen with the
original pre-DC codepath in amdgpu_display_crtc_set_config() in
amdgpu_display.c). This means it's very likely that this bug was
introduced during the switch over the DC.
So to fix this, we start grabbing runtime PM references every time we
enable a previously disabled CRTC in atomic_commit_tail(). This appears
to be the correct solution, as it matches up with what i915 does in
i915/intel_runtime_pm.c.
The one sideaffect of this is that we ignore the variable that the
pre-DC code used to use for tracking when it needed runtime PM refs,
adev->have_disp_power_ref. This is mainly because there's no way for a
driver to tell whether or not all of it's CRTCs are enabled or disabled
when we've begun committing an atomic state, as there may be CRTC
commits happening in parallel that aren't contained within the atomic
state being committed. So, it's safer to just get/put a reference for
each CRTC being enabled or disabled in the new atomic state.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Patch 9667849bbb: "drm/amd/powerplay: add control gfxoff enabling in late
init" from Mar 13, 2018, leads to the following static checker warning:
drivers/gpu/drm/amd/amdgpu/../powerplay/amd_powerplay.c:194
pp_late_init()
error: we previously assumed 'hwmgr' could be null (see line 185)
drivers/gpu/drm/amd/amdgpu/../powerplay/amd_powerplay.c
This patch fixes the warning to add hwmgr checking.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After defer the execution of clockgating enabling, at that time, gfx already
enter into "off" state. Howerver, clockgating enabling will use MMIO to access
the gfx registers, then get the gfx hung.
So here we should move the gfx powergating and gfxoff enabling behavior at the
end of initialization behind clockgating.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: assign bo_va as well
We need to put the lose ends on the invalid list because it is possible
that we need to split up huge pages for them.
Cc: stable@vger.kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> (v2)
Reviewed-by: David Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sos ucode version will be changed to align with the value of
mmMP0_SMN_C2PMSG_58. Then we add a checking for this. Meanwhile, we have to be
compatibility backwards. So it adds serveral recent legacy versions as the white
list for the version checking.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It missed vcn.fw_version setting when init vcn microcode, and it will be used to
report vcn ucode version via amdgpu_firmware_info sysfs interface.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
- fix some bugs introduced by the recent Kconfig syntax extension
- add some symbols about compiler information in Kconfig, such as
CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
- test compiler capability for the stack protector in Kconfig, and
clean-up Makefile
- test compiler capability for GCC-plugins in Kconfig, and clean-up
Makefile
- allow to enable GCC-plugins for COMPILE_TEST
- test compiler capability for KCOV in Kconfig and correct dependency
- remove auto-detect mode of the GCOV format, which is now more nicely
handled in Kconfig
- test compiler capability for mprofile-kernel on PowerPC, and
clean-up Makefile
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VABv
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix some bugs introduced by the recent Kconfig syntax extension
- add some symbols about compiler information in Kconfig, such as
CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
- test compiler capability for the stack protector in Kconfig, and
clean-up Makefile
- test compiler capability for GCC-plugins in Kconfig, and clean-up
Makefile
- allow to enable GCC-plugins for COMPILE_TEST
- test compiler capability for KCOV in Kconfig and correct dependency
- remove auto-detect mode of the GCOV format, which is now more nicely
handled in Kconfig
- test compiler capability for mprofile-kernel on PowerPC, and clean-up
Makefile
- misc cleanups
* tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
linux/linkage.h: replace VMLINUX_SYMBOL_STR() with __stringify()
kconfig: fix localmodconfig
sh: remove no-op macro VMLINUX_SYMBOL()
powerpc/kbuild: move -mprofile-kernel check to Kconfig
Documentation: kconfig: add recommended way to describe compiler support
gcc-plugins: disable GCC_PLUGIN_STRUCTLEAK_BYREF_ALL for COMPILE_TEST
gcc-plugins: allow to enable GCC_PLUGINS for COMPILE_TEST
gcc-plugins: test plugin support in Kconfig and clean up Makefile
gcc-plugins: move GCC version check for PowerPC to Kconfig
kcov: test compiler capability in Kconfig and correct dependency
gcov: remove CONFIG_GCOV_FORMAT_AUTODETECT
arm64: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
kconfig: add CC_IS_CLANG and CLANG_VERSION
kconfig: add CC_IS_GCC and GCC_VERSION
stack-protector: test compiler capability in Kconfig and drop AUTO mode
kbuild: fix endless syncconfig in case arch Makefile sets CROSS_COMPILE
- Update the ACPICA code in the kernel to upstream revision
20180531 including:
* AML parser fix to continue loading tables after detecting an AML
error (Erik Schmauss).
* AML parser debug option to dump parse trees (Bob Moore).
* Debugger updates (Bob Moore).
* Initial bits of Unload () operator deprecation (Bob Moore).
* Updates related to the IORT table (Robin Murphy).
- Make Linux respond to the "Windows 2017.2" _OSI string which
allows native Thunderbolt enumeration to be used on Dell systems
and was unsafe before recent changes in the PCI subsystem (Mario
Limonciello).
- Update the ACPI method customization feature documentation (Erik
Schmauss).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJbIOh2AAoJEILEb/54YlRxLCQP/j4rm5Z2lsup6OTggXI8fd1r
EUUkcsFFn5Wd/7l9zflARdaCQpSQ6JWTOg+VElTQWzErkIqVpU+putUJmD/G5aE2
Qa6XmhCqPyEFynS2GAyJv66/F1VI40U3MJV7jrAi77EmtOW0L2wFGHLrMpI+FYH2
frZg66ja6RwWg+71FhSjXJCV95WjZD/0/xDRzcZY7pWmxL23w7SnOt7TAc+Kqs6g
xV2kHCwRISwH9ss+uXU6uJ7rZhcHNrF8kmH3uEc+ANmbY6ChatC9oOv1KZgtIxdc
xt+R/CNn+5KIo6Em6Zn+nlJpdYMz0tjY0A65OQGKIB0/7LPA+u/b7Zb18pyz21NB
BGOOnCE+NKUk5VMPuvAlTeABX32qtFPEvC1/qMfwNPADOLW1zmEywAmoqWGO9E+v
EbX0ETrnHC/wFjEx5Qx3HHTmr+l1zSTzS6JRVW75WmrOVz7GGLcJST4FNtYkn/bz
H/qu2QfmyswDsw3YUyPK6j6ZxVOb0dyizlp56eA6DHC0bSXdPhgOLc8bq1QX1BG2
ctPnU3Ee8V/D2ashFp04lRUledTatkfkSSNA5wW892PpCqC4kcAJ23PZf7sprvIW
oHbq/WQAH2NWoUH8SA2yHSKNNxHFaDp3Uf+iOviNWb8jnPO9t3FSKmt5wcyKNw8o
Qwkrcp904VAu0vvMSYla
=FPpd
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull additional ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20180531 including one important AML parser fix and updates related to
the IORT table, make the kernel recognize the "Windows 2017.2" _OSI
string and update the customized methods documentation.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20180531
including:
* AML parser fix to continue loading tables after detecting an AML
error (Erik Schmauss).
* AML parser debug option to dump parse trees (Bob Moore).
* Debugger updates (Bob Moore).
* Initial bits of Unload () operator deprecation (Bob Moore).
* Updates related to the IORT table (Robin Murphy).
- Make Linux respond to the "Windows 2017.2" _OSI string which
allows native Thunderbolt enumeration to be used on Dell systems
and was unsafe before recent changes in the PCI subsystem (Mario
Limonciello)
- Update the ACPI method customization feature documentation (Erik
Schmauss)"
* tag 'acpi-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Recognize the _OSI string "Windows 2017.2"
ACPICA: Update version to 20180531
ACPICA: Interpreter: Begin deprecation of Unload operator
ACPICA: AML parser: attempt to continue loading table after error
ACPICA: Debugger: Reduce verbosity for module-level code errors.
ACPICA: AML Parser: Add debug option to dump parse trees
ACPICA: Debugger: Add count of namespace nodes after namespace dump
ACPICA: IORT: Add PMCG node supprt
ACPICA: IORT: Update for revision D
ACPI / Documentation: update ACPI customize method feature docs
- Revert a recent PM core change that attempted to fix an issue
related to device links, but introduced a regression (Rafael
Wysocki).
- Fix build when the recently added cpufreq driver for Kryo
processors is selected by making it possible to build that
driver as a module (Arnd Bergmann).
- Fix the long idle detection mechanism in the out-of-band
(ondemand and conservative) cpufreq governors (Chen Yu).
- Add support for devices in multiple power domains to the
generic power domains (genpd) framework (Ulf Hansson).
- Add support for iowait boosting on systems with hardware-managed
P-states (HWP) enabled to the intel_pstate driver and make it use
that feature on systems with Skylake Xeon processors as it is
reported to improve performance significantly on those systems
(Srinivas Pandruvada).
- Fix and update the acpi_cpufreq, ti-cpufreq and imx6q cpufreq
drivers (Colin Ian King, Suman Anna, Sébastien Szymanski).
- Change the behavior of the wakeup_count device attribute in
sysfs to expose the number of events when the device might have
aborted system suspend in progress (Ravi Chandra Sadineni).
- Fix two minor issues in the cpupower utility (Abhishek Goel,
Colin Ian King).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=VROk
-----END PGP SIGNATURE-----
Merge tag 'pm-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These revert a recent PM core change that introduced a regression, fix
the build when the recently added Kryo cpufreq driver is selected, add
support for devices attached to multiple power domains to the generic
power domains (genpd) framework, add support for iowait boosting on
systens with hardware-managed P-states (HWP) enabled to the
intel_pstate driver, modify the behavior of the wakeup_count device
attribute in sysfs, fix a few issues and clean up some ugliness,
mostly in cpufreq (core and drivers) and in the cpupower utility.
Specifics:
- Revert a recent PM core change that attempted to fix an issue
related to device links, but introduced a regression (Rafael
Wysocki)
- Fix build when the recently added cpufreq driver for Kryo
processors is selected by making it possible to build that driver
as a module (Arnd Bergmann)
- Fix the long idle detection mechanism in the out-of-band (ondemand
and conservative) cpufreq governors (Chen Yu)
- Add support for devices in multiple power domains to the generic
power domains (genpd) framework (Ulf Hansson)
- Add support for iowait boosting on systems with hardware-managed
P-states (HWP) enabled to the intel_pstate driver and make it use
that feature on systems with Skylake Xeon processors as it is
reported to improve performance significantly on those systems
(Srinivas Pandruvada)
- Fix and update the acpi_cpufreq, ti-cpufreq and imx6q cpufreq
drivers (Colin Ian King, Suman Anna, Sébastien Szymanski)
- Change the behavior of the wakeup_count device attribute in sysfs
to expose the number of events when the device might have aborted
system suspend in progress (Ravi Chandra Sadineni)
- Fix two minor issues in the cpupower utility (Abhishek Goel, Colin
Ian King)"
* tag 'pm-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PM / runtime: Fixup reference counting of device link suppliers at probe"
cpufreq: imx6q: check speed grades for i.MX6ULL
cpufreq: governors: Fix long idle detection logic in load calculation
cpufreq: intel_pstate: enable boost for Skylake Xeon
PM / wakeup: Export wakeup_count instead of event_count via sysfs
PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains
PM / Domains: Add support for multi PM domains per device to genpd
PM / Domains: Split genpd_dev_pm_attach()
PM / Domains: Don't attach devices in genpd with multi PM domains
PM / Domains: dt: Allow power-domain property to be a list of specifiers
cpufreq: intel_pstate: New sysfs entry to control HWP boost
cpufreq: intel_pstate: HWP boost performance on IO wakeup
cpufreq: intel_pstate: Add HWP boost utility and sched util hooks
cpufreq: ti-cpufreq: Use devres managed API in probe()
cpufreq: ti-cpufreq: Fix an incorrect error return value
cpufreq: ACPI: make function acpi_cpufreq_fast_switch() static
cpufreq: kryo: allow building as a loadable module
cpupower : Fix header name to read idle state name
cpupower: fix spelling mistake: "logilename" -> "logfilename"
ACPICA update to upstream revision 20180531 (including an important
AML parser fix and updates related to IORT) and a change to start
responding to the "Windows 2017.2" _OSI string.
* acpica:
ACPICA: Recognize the _OSI string "Windows 2017.2"
ACPICA: Update version to 20180531
ACPICA: Interpreter: Begin deprecation of Unload operator
ACPICA: AML parser: attempt to continue loading table after error
ACPICA: Debugger: Reduce verbosity for module-level code errors.
ACPICA: AML Parser: Add debug option to dump parse trees
ACPICA: Debugger: Add count of namespace nodes after namespace dump
ACPICA: IORT: Add PMCG node supprt
ACPICA: IORT: Update for revision D
Additional updates of the generic power domains (genpd) framework
(support for devices attached to multiple domains) and the cpupower
utility (minor fixes) for 4.18-rc1.
* pm-domains:
PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains
PM / Domains: Add support for multi PM domains per device to genpd
PM / Domains: Split genpd_dev_pm_attach()
PM / Domains: Don't attach devices in genpd with multi PM domains
PM / Domains: dt: Allow power-domain property to be a list of specifiers
* pm-tools:
cpupower : Fix header name to read idle state name
cpupower: fix spelling mistake: "logilename" -> "logfilename"
Additional cpufreq updates for 4.18-rc1: fixes and cleanups in the
core and drivers and intel_pstate extension to do iowait boosting
on systems with HWP that improves performance quite a bit.
* pm-cpufreq:
cpufreq: imx6q: check speed grades for i.MX6ULL
cpufreq: governors: Fix long idle detection logic in load calculation
cpufreq: intel_pstate: enable boost for Skylake Xeon
cpufreq: intel_pstate: New sysfs entry to control HWP boost
cpufreq: intel_pstate: HWP boost performance on IO wakeup
cpufreq: intel_pstate: Add HWP boost utility and sched util hooks
cpufreq: ti-cpufreq: Use devres managed API in probe()
cpufreq: ti-cpufreq: Fix an incorrect error return value
cpufreq: ACPI: make function acpi_cpufreq_fast_switch() static
cpufreq: kryo: allow building as a loadable module
Don't optimize our namespace rescan based on the changed namespace list
log page as userspace might have changed the content through reading
it.
Suggested-by: Keith Busch <keith.busch@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@linux.intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Use more generic method to detect DSD capability of XMOS-based UAC2
implementations in order to support future devices without having to
explicitly list every device separately.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
