Coverity reports a warning due to unitialized attr structure in one
code path.
Reported by Coverity (CID 728535)
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeff Layton <jlayton@samba.org>
null tcon is not possible in these paths so
remove confusing null check
Reported by Coverity (CID 728519)
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeff Layton <jlayton@samba.org>
remove impossible check
Pointed out by Coverity (CID 115422)
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeff Layton <jlayton@samba.org>
workstation_RFC1001_name is part of the struct and can't be null,
remove impossible comparison (array vs. null)
Pointed out by Coverity (CID 140095)
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeff Layton <jlayton@samba.org>
Coverity reports a warning for referencing the beginning of the
SMB2/SMB3 frame using the ProtocolId field as an array. Although
it works the same either way, this patch should quiet the warning
and might be a little clearer.
Reported by Coverity (CID 741269)
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
null tcon is not likely in these paths in current
code, but obviously it does clarify the code to
check for null (if at all) before derefrencing
rather than after.
Reported by Coverity (CID 1042666)
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Although unlikely to fail (and tree connect does not commonly send
a password since SECMODE_USER is the default for most servers)
do not ignore errors on SMBNTEncrypt in SMB Tree Connect.
Reported by Coverity (CID 1226853)
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Pointed out by coverity analyzer. resp_buftype is
not initialized in one path which can rarely log
a spurious warning (buf is null so there will
not be a problem with freeing data, but if buf_type
were randomly set to wrong value could log a warning)
Reported by Coverity (CID 1269144)
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
For example, when mount opt is redundently specified
(e.g., "user=A,user=B,user=C"), kernel kept allocating new key/val
with kstrdup() and overwrite previous ptr (to be freed).
Althouhg mount.cifs in userspace performs a bit of sanitization
(e.g., forcing one user option), current implementation is not
robust. Other options such as iocharset and domainanme are similarly
vulnerable.
Signed-off-by: Taesoo Kim <tsgatesv@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Under intermittent network outages, find_writable_file() is susceptible
to the following race condition, which results in a user-after-free in
the cifs_writepages code-path:
Thread 1 Thread 2
======== ========
inv_file = NULL
refind = 0
spin_lock(&cifs_file_list_lock)
// invalidHandle found on openFileList
inv_file = open_file
// inv_file->count currently 1
cifsFileInfo_get(inv_file)
// inv_file->count = 2
spin_unlock(&cifs_file_list_lock);
cifs_reopen_file() cifs_close()
// fails (rc != 0) ->cifsFileInfo_put()
spin_lock(&cifs_file_list_lock)
// inv_file->count = 1
spin_unlock(&cifs_file_list_lock)
spin_lock(&cifs_file_list_lock);
list_move_tail(&inv_file->flist,
&cifs_inode->openFileList);
spin_unlock(&cifs_file_list_lock);
cifsFileInfo_put(inv_file);
->spin_lock(&cifs_file_list_lock)
// inv_file->count = 0
list_del(&cifs_file->flist);
// cleanup!!
kfree(cifs_file);
spin_unlock(&cifs_file_list_lock);
spin_lock(&cifs_file_list_lock);
++refind;
// refind = 1
goto refind_writable;
At this point we loop back through with an invalid inv_file pointer
and a refind value of 1. On second pass, inv_file is not overwritten on
openFileList traversal, and is subsequently dereferenced.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Jeff Layton <jlayton@samba.org>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
While attempting to clone a file on a samba server, we receive a
STATUS_INVALID_DEVICE_REQUEST. This is mapped to -EOPNOTSUPP which
isn't handled in smb2_clone_range(). We end up looping in the while loop
making same call to the samba server over and over again.
The proposed fix is to exit and return the error value when encountered
with an unhandled error.
Cc: <stable@vger.kernel.org>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
Signed-off-by: Steve French <smfrench@gmail.com>
This reverts commit 9bd0f45b70.
Linus rightly pointed out that I failed to initialize the counters
when adding them, so they don't work as expected. Just revert this
patch for now.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Pull backing device changes from Jens Axboe:
"This contains a cleanup of how the backing device is handled, in
preparation for a rework of the life time rules. In this part, the
most important change is to split the unrelated nommu mmap flags from
it, but also removing a backing_dev_info pointer from the
address_space (and inode), and a cleanup of other various minor bits.
Christoph did all the work here, I just fixed an oops with pages that
have a swap backing. Arnd fixed a missing export, and Oleg killed the
lustre backing_dev_info from staging. Last patch was from Al,
unexporting parts that are now no longer needed outside"
* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
Make super_blocks and sb_lock static
mtd: export new mtd_mmap_capabilities
fs: make inode_to_bdi() handle NULL inode
staging/lustre/llite: get rid of backing_dev_info
fs: remove default_backing_dev_info
fs: don't reassign dirty inodes to default_backing_dev_info
nfs: don't call bdi_unregister
ceph: remove call to bdi_unregister
fs: remove mapping->backing_dev_info
fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
nilfs2: set up s_bdi like the generic mount_bdev code
block_dev: get bdev inode bdi directly from the block device
block_dev: only write bdev inode on close
fs: introduce f_op->mmap_capabilities for nommu mmap support
fs: kill BDI_CAP_SWAP_BACKED
fs: deduplicate noop_backing_dev_info
Merge misc updates from Andrew Morton:
"Bite-sized chunks this time, to avoid the MTA ratelimiting woes.
- fs/notify updates
- ocfs2
- some of MM"
That laconic "some MM" is mainly the removal of remap_file_pages(),
which is a big simplification of the VM, and which gets rid of a *lot*
of random cruft and special cases because we no longer support the
non-linear mappings that it used.
From a user interface perspective, nothing has changed, because the
remap_file_pages() syscall still exists, it's just done by emulating the
old behavior by creating a lot of individual small mappings instead of
one non-linear one.
The emulation is slower than the old "native" non-linear mappings, but
nobody really uses or cares about remap_file_pages(), and simplifying
the VM is a big advantage.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (78 commits)
memcg: zap memcg_slab_caches and memcg_slab_mutex
memcg: zap memcg_name argument of memcg_create_kmem_cache
memcg: zap __memcg_{charge,uncharge}_slab
mm/page_alloc.c: place zone_id check before VM_BUG_ON_PAGE check
mm: hugetlb: fix type of hugetlb_treat_as_movable variable
mm, hugetlb: remove unnecessary lower bound on sysctl handlers"?
mm: memory: merge shared-writable dirtying branches in do_wp_page()
mm: memory: remove ->vm_file check on shared writable vmas
xtensa: drop _PAGE_FILE and pte_file()-related helpers
x86: drop _PAGE_FILE and pte_file()-related helpers
unicore32: drop pte_file()-related helpers
um: drop _PAGE_FILE and pte_file()-related helpers
tile: drop pte_file()-related helpers
sparc: drop pte_file()-related helpers
sh: drop _PAGE_FILE and pte_file()-related helpers
score: drop _PAGE_FILE and pte_file()-related helpers
s390: drop pte_file()-related helpers
parisc: drop _PAGE_FILE and pte_file()-related helpers
openrisc: drop _PAGE_FILE and pte_file()-related helpers
nios2: drop _PAGE_FILE and pte_file()-related helpers
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6+UV
-----END PGP SIGNATURE-----
Merge tag 'locks-v3.20-1' of git://git.samba.org/jlayton/linux
Pull file locking related changes #1 from Jeff Layton:
"This patchset contains a fairly major overhaul of how file locks are
tracked within the inode. Rather than a single list, we now create a
per-inode "lock context" that contains individual lists for the file
locks, and a new dedicated spinlock for them.
There are changes in other trees that are based on top of this set so
it may be easiest to pull this in early"
* tag 'locks-v3.20-1' of git://git.samba.org/jlayton/linux:
locks: update comments that refer to inode->i_flock
locks: consolidate NULL i_flctx checks in locks_remove_file
locks: keep a count of locks on the flctx lists
locks: clean up the lm_change prototype
locks: add a dedicated spinlock to protect i_flctx lists
locks: remove i_flock field from struct inode
locks: convert lease handling to file_lock_context
locks: convert posix locks to file_lock_context
locks: move flock locks to file_lock_context
ceph: move spinlocking into ceph_encode_locks_to_buffer and ceph_count_locks
locks: add a new struct file_locking_context pointer to struct inode
locks: have locks_release_file use flock_lock_file to release generic flock locks
locks: add new struct list_head to struct file_lock
Pull cifs fixes from Steve French:
"Three small cifs fixes. One fixes a hang under stress, and the other
two are security related"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix MUST SecurityFlags filtering
Complete oplock break jobs before closing file handle
cifs: use memzero_explicit to clear stack buffer
If CONFIG_CIFS_WEAK_PW_HASH is not set, CIFSSEC_MUST_LANMAN
and CIFSSEC_MUST_PLNTXT is defined as 0.
When setting new SecurityFlags without any MUST flags,
your flags would be overwritten with CIFSSEC_MUST_LANMAN (0).
Signed-off-by: Niklas Cassel <niklass@axis.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
Now that we never use the backing_dev_info pointer in struct address_space
we can simply remove it and save 4 to 8 bytes in every inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since "BDI: Provide backing device capability information [try #3]" the
backing_dev_info structure also provides flags for the kind of mmap
operation available in a nommu environment, which is entirely unrelated
to it's original purpose.
Introduce a new nommu-only file operation to provide this information to
the nommu mmap code instead. Splitting this from the backing_dev_info
structure allows to remove lots of backing_dev_info instance that aren't
otherwise needed, and entirely gets rid of the concept of providing a
backing_dev_info for a character device. It also removes the need for
the mtd_inodefs filesystem.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit
c11f1df500
requires writers to wait for any pending oplock break handler to
complete before proceeding to write. This is done by waiting on bit
CIFS_INODE_PENDING_OPLOCK_BREAK in cifsFileInfo->flags. This bit is
cleared by the oplock break handler job queued on the workqueue once it
has completed handling the oplock break allowing writers to proceed with
writing to the file.
While testing, it was noticed that the filehandle could be closed while
there is a pending oplock break which results in the oplock break
handler on the cifsiod workqueue being cancelled before it has had a
chance to execute and clear the CIFS_INODE_PENDING_OPLOCK_BREAK bit.
Any subsequent attempt to write to this file hangs waiting for the
CIFS_INODE_PENDING_OPLOCK_BREAK bit to be cleared.
We fix this by ensuring that we also clear the bit
CIFS_INODE_PENDING_OPLOCK_BREAK when we remove the oplock break handler
from the workqueue.
The bug was found by Red Hat QA while testing using ltp's fsstress
command.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <steve.french@primarydata.com>
When leaving a function use memzero_explicit instead of memset(0) to
clear stack allocated buffers. memset(0) may be optimized away.
This particular buffer is highly likely to contain sensitive data which
we shouldn't leak (it's named 'passwd' after all).
Signed-off-by: Giel van Schijndel <me@mortis.eu>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reported-at: http://www.viva64.com/en/b/0299/
Reported-by: Andrey Karpov
Reported-by: Svyatoslav Razmyslov
Signed-off-by: Steve French <steve.french@primarydata.com>
It really needs to check that src is non-directory *and* use
{un,}lock_two_nodirectories(). As it is, it's trivial to cause
double-lock (ioctl(fd, CIFS_IOC_COPYCHUNK_FILE, fd)) and if the
last argument is an fd of directory, we are asking for trouble
by violating the locking order - all directories go before all
non-directories. If the last argument is an fd of parent
directory, it has 50% odds of locking child before parent,
which will cause AB-BA deadlock if we race with unlink().
Cc: stable@vger.kernel.org @ 3.13+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This makes things a bit more efficient in the cifs and ceph lock
pushing code.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
We can now add a dedicated spinlock without expanding struct inode.
Change to using that to protect the various i_flctx lists.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
In spite of different file type,
if file is same name and same inode number, old inode cache is used.
This causes that you can not cd directory, can not cat SymbolicLink.
So this patch is that if file type is different, return error.
Reproducible sample :
1. create file 'a' at cifs client.
2. repeat rm and mkdir 'a' 4 times at server, then direcotry 'a' having same inode number is created.
(Repeat 4 times, then same inode number is recycled.)
(When server is under RHEL 6.6, 1 time is O.K. Always same inode number is recycled.)
3. ls -li at client, then you can not cd directory, can not remove directory.
SymbolicLink has same problem.
Bug link:
https://bugzilla.kernel.org/show_bug.cgi?id=90011
Signed-off-by: Nakajima Akira <nakajima.akira@nttcom.co.jp>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
Commit 2ae83bf938 ("[CIFS] Fix setting time before epoch (negative
time values)") changed "u64 t" to "s64 t", which makes do_div() complain
about a pointer signedness mismatch:
CC fs/cifs/netmisc.o
In file included from ./arch/mips/include/asm/div64.h:12:0,
from include/linux/kernel.h:124,
from include/linux/list.h:8,
from include/linux/wait.h:6,
from include/linux/net.h:23,
from fs/cifs/netmisc.c:25:
fs/cifs/netmisc.c: In function ‘cifs_NTtimeToUnix’:
include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast [enabled by default]
(void)(((typeof((n)) *)0) == ((uint64_t *)0)); \
^
fs/cifs/netmisc.c:941:22: note: in expansion of macro ‘do_div’
ts.tv_nsec = (long)do_div(t, 10000000) * 100;
Introduce a temporary "u64 abs_t" variable to fix this.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
We have encountered failures when When testing smb2 mounts on ppc64
machines when using both Samba as well as Windows 2012.
On poking around, the problem was determined to be caused by the
high endian MessageID passed in the header for smb2. On checking the
corresponding MID for smb1 is converted to LE before being sent on the
wire.
We have tested this patch successfully on a ppc64 machine.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Merge first patchbomb from Andrew Morton:
- a few minor cifs fixes
- dma-debug upadtes
- ocfs2
- slab
- about half of MM
- procfs
- kernel/exit.c
- panic.c tweaks
- printk upates
- lib/ updates
- checkpatch updates
- fs/binfmt updates
- the drivers/rtc tree
- nilfs
- kmod fixes
- more kernel/exit.c
- various other misc tweaks and fixes
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
exit: pidns: fix/update the comments in zap_pid_ns_processes()
exit: pidns: alloc_pid() leaks pid_namespace if child_reaper is exiting
exit: exit_notify: re-use "dead" list to autoreap current
exit: reparent: call forget_original_parent() under tasklist_lock
exit: reparent: avoid find_new_reaper() if no children
exit: reparent: introduce find_alive_thread()
exit: reparent: introduce find_child_reaper()
exit: reparent: document the ->has_child_subreaper checks
exit: reparent: s/while_each_thread/for_each_thread/ in find_new_reaper()
exit: reparent: fix the cross-namespace PR_SET_CHILD_SUBREAPER reparenting
exit: reparent: fix the dead-parent PR_SET_CHILD_SUBREAPER reparenting
exit: proc: don't try to flush /proc/tgid/task/tgid
exit: release_task: fix the comment about group leader accounting
exit: wait: drop tasklist_lock before psig->c* accounting
exit: wait: don't use zombie->real_parent
exit: wait: cleanup the ptrace_reparented() checks
usermodehelper: kill the kmod_thread_locker logic
usermodehelper: don't use CLONE_VFORK for ____call_usermodehelper()
fs/hfs/catalog.c: fix comparison bug in hfs_cat_keycmp
nilfs2: fix the nilfs_iget() vs. nilfs_new_inode() races
...
kcalloc manages count*sizeof overflow.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kcalloc manages count*sizeof overflow.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace all __constant_foo to foo() except in smb2status.h (1700 lines to
update).
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Steve French <sfrench@samba.org>
Cc: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull VFS changes from Al Viro:
"First pile out of several (there _definitely_ will be more). Stuff in
this one:
- unification of d_splice_alias()/d_materialize_unique()
- iov_iter rewrite
- killing a bunch of ->f_path.dentry users (and f_dentry macro).
Getting that completed will make life much simpler for
unionmount/overlayfs, since then we'll be able to limit the places
sensitive to file _dentry_ to reasonably few. Which allows to have
file_inode(file) pointing to inode in a covered layer, with dentry
pointing to (negative) dentry in union one.
Still not complete, but much closer now.
- crapectomy in lustre (dead code removal, mostly)
- "let's make seq_printf return nothing" preparations
- assorted cleanups and fixes
There _definitely_ will be more piles"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
copy_from_iter_nocache()
new helper: iov_iter_kvec()
csum_and_copy_..._iter()
iov_iter.c: handle ITER_KVEC directly
iov_iter.c: convert copy_to_iter() to iterate_and_advance
iov_iter.c: convert copy_from_iter() to iterate_and_advance
iov_iter.c: get rid of bvec_copy_page_{to,from}_iter()
iov_iter.c: convert iov_iter_zero() to iterate_and_advance
iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds
iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds
iov_iter.c: convert iov_iter_npages() to iterate_all_kinds
iov_iter.c: iterate_and_advance
iov_iter.c: macros for iterating over iov_iter
kill f_dentry macro
dcache: fix kmemcheck warning in switch_names
new helper: audit_file()
nfsd_vfs_write(): use file_inode()
ncpfs: use file_inode()
kill f_dentry uses
lockd: get rid of ->f_path.dentry->d_sb
...
file->private_data can never be null after calling initiate_cifs_search.
So private null check condition is not needed.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
A user complained that they were unable to login to their cifs share
after a kernel update. From the wiretrace we can see that the server
returns different UIDs as response to NTLMSSP_NEGOTIATE and NTLMSSP_AUTH
phases.
With changes in the authentication code, we no longer set the
cifs_sess->Suid returned in response to the NTLM_AUTH phase and continue
to use the UID sent in response to the NTLMSSP_NEGOTIATE phase. This
results in the server denying access to the user when the user attempts
to do a tcon connect.
See https://bugzilla.redhat.com/show_bug.cgi?id=1163927
A test kernel containing patch was tested successfully by the user.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
The useful macros embed message level in the name. Thus, it cleans up the code
a bit. In cases when it was plain printk() the conversion was done to info
level.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
This patch converts custom dumper to use native print_hex_dump() instead. The
cifs_dump_mem() will have an offsets per each line which differs it from the
original code.
In the dump_smb() we may use native print_hex_dump() as well. It will show
slightly different output in ASCII part when character is unprintable,
otherwise it keeps same structure.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
Meanwhile it cleans up the code, the behaviour is slightly changed. In case of
providing non-boolean value it will fails with corresponding error. In the
original code the attempt of an update was just ignored in such case.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
Add missing defines needed for ACL query support.
For definitions of these security info type additionalinfo flags
and also the EA Flags see MS-SMB2 (2.2.37) or MS-DTYP
Signed-of-by: Steven French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
In many cases the simple fallocate call is
a no op (since the file is already not sparse) or
can simply be converted from a sparse to a non-sparse
file if we are fallocating the whole file and keeping
the size.
Signed-off-by: Steven French <smfrench@gmail.com>
Mac server returns that they support CIFS Unix Extensions but
doesn't actually support QUERY_FILE_UNIX_BASIC so mount fails.
Workaround this problem by disabling use of Unix CIFS protocol
extensions if server returns an EOPNOTSUPP error on
QUERY_FILE_UNIX_BASIC during mount.
Signed-off-by: Steve French <smfrench@gmail.com>
This is a bigger patch, but its size is mostly due to
a single change for how we check for remapping illegal characters
in file names - a lot of repeated, small changes to
the way callers request converting file names.
The final patch in the series does the following:
1) changes default behavior for cifs to be more intuitive.
Currently we do not map by default to seven reserved characters,
ie those valid in POSIX but not in NTFS/CIFS/SMB3/Windows,
unless a mount option (mapchars) is specified. Change this
to by default always map and map using the SFM maping
(like the Mac uses) unless the server negotiates the CIFS Unix
Extensions (like Samba does when mounting with the cifs protocol)
when the remapping of the characters is unnecessary. This should
help SMB3 mounts in particular since Samba will likely be
able to implement this mapping with its new "vfs_fruit" module
as it will be doing for the Mac.
2) if the user specifies the existing "mapchars" mount option then
use the "SFU" (Microsoft Services for Unix, SUA) style mapping of
the seven characters instead.
3) if the user specifies "nomapposix" then disable SFM/MAC style mapping
(so no character remapping would be used unless the user specifies
"mapchars" on mount as well, as above).
4) change all the places in the code that check for the superblock
flag on the mount which is set by mapchars and passed in on all
path based operation and change it to use a small function call
instead to set the mapping type properly (and check for the
mapping type in the cifs unicode functions)
Signed-off-by: Steve French <smfrench@gmail.com>
The previous patch allowed remapping reserved characters from directory
listenings, this patch adds conversion the other direction, allowing
opening of files with any of the seven reserved characters.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
This allows directory listings to Mac to display filenames
correctly which have been created with illegal (to Windows)
characters in their filename. It does not allow
converting the other direction yet ie opening files with
these characters (followon patch).
There are seven reserved characters that need to be remapped when
mounting to Windows, Mac (or any server without Unix Extensions) which
are valid in POSIX but not in the other OS.
: \ < > ? * |
We used the normal UCS-2 remap range for this in order to convert this
to/from UTF8 as did Windows Services for Unix (basically add 0xF000 to
any of the 7 reserved characters), at least when the "mapchars" mount
option was specified.
Mac used a very slightly different "Services for Mac" remap range
0xF021 through 0xF027. The attached patch allows cifs.ko (the kernel
client) to read directories on macs containing files with these
characters and display their names properly. In theory this even
might be useful on mounts to Samba when the vfs_catia or new
"vfs_fruit" module is loaded.
Currently the 7 reserved characters look very strange in directory
listings from cifs.ko to Mac server. This patch allows these file
name characters to be read (requires specifying mapchars on mount).
Two additional changes are needed:
1) Make it more automatic: a way of detecting enough info so that
we know to try to always remap these characters or not. Various
have suggested that the SFM approach be made the default when
the server does not support POSIX Unix extensions (cifs mounts
to Samba for example) so need to make SFM remapping the default
unless mapchars (SFU style mapping) specified on mount or no
mapping explicitly requested or no mapping needed (cifs mounts to Samba).
2) Adding a patch to map the characters the other direction
(ie UTF-8 to UCS-2 on open). This patch does it for translating
readdir entries (ie UCS-2 to UTF-8)
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Adds support on SMB2.1 and SMB3 mounts for emulation of symlinks
via the "Minshall/French" symlink format already used for cifs
mounts when mfsymlinks mount option is used (and also used by Apple).
http://wiki.samba.org/index.php/UNIX_Extensions#Minshall.2BFrench_symlinks
This second patch adds support to query them (recognize them as symlinks
and read them). Third version of patch makes minor corrections
to error handling.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Adds support on SMB2.1 and SMB3 mounts for emulation of symlinks
via the "Minshall/French" symlink format already used for cifs
mounts when mfsymlinks mount option is used (and also used by Apple).
http://wiki.samba.org/index.php/UNIX_Extensions#Minshall.2BFrench_symlinks
This first patch adds support to create them. The next patch will
add support for recognizing them and reading them. Although CIFS/SMB3
have other types of symlinks, in the many use cases they aren't
practical (e.g. either require cifs only mounts with unix extensions
to Samba, or require the user to be Administrator to Windows for SMB3).
This also helps enable running additional xfstests over SMB3 (since some
xfstests directly or indirectly require symlink support).
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stefan Metzmacher <metze@samba.org>
The "sfu" mount option did not work on SMB2/SMB3 mounts.
With these changes when the "sfu" mount option is passed in
on an smb2/smb2.1/smb3 mount the client can emulate (and
recognize) fifo and device (character and device files).
In addition the "sfu" mount option should not conflict
with "mfsymlinks" (symlink emulation) as we will never
create "sfu" style symlinks, but using "sfu" mount option
will allow us to recognize existing symlinks, created with
Microsoft "Services for Unix" (SFU and SUA).
To enable the "sfu" mount option for SMB2/SMB3 the calling
syntax of the generic cifs/smb2/smb3 sync_read and sync_write
protocol dependent function needed to be changed (we
don't have a file struct in all cases), but this actually
ended up simplifying the code a little.
Signed-off-by: Steve French <smfrench@gmail.com>
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.
To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs updates from Al Viro:
"The big thing in this pile is Eric's unmount-on-rmdir series; we
finally have everything we need for that. The final piece of prereqs
is delayed mntput() - now filesystem shutdown always happens on
shallow stack.
Other than that, we have several new primitives for iov_iter (Matt
Wilcox, culled from his XIP-related series) pushing the conversion to
->read_iter()/ ->write_iter() a bit more, a bunch of fs/dcache.c
cleanups and fixes (including the external name refcounting, which
gives consistent behaviour of d_move() wrt procfs symlinks for long
and short names alike) and assorted cleanups and fixes all over the
place.
This is just the first pile; there's a lot of stuff from various
people that ought to go in this window. Starting with
unionmount/overlayfs mess... ;-/"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (60 commits)
fs/file_table.c: Update alloc_file() comment
vfs: Deduplicate code shared by xattr system calls operating on paths
reiserfs: remove pointless forward declaration of struct nameidata
don't need that forward declaration of struct nameidata in dcache.h anymore
take dname_external() into fs/dcache.c
let path_init() failures treated the same way as subsequent link_path_walk()
fix misuses of f_count() in ppp and netlink
ncpfs: use list_for_each_entry() for d_subdirs walk
vfs: move getname() from callers to do_mount()
gfs2_atomic_open(): skip lookups on hashed dentry
[infiniband] remove pointless assignments
gadgetfs: saner API for gadgetfs_create_file()
f_fs: saner API for ffs_sb_create_file()
jfs: don't hash direct inode
[s390] remove pointless assignment of ->f_op in vmlogrdr ->open()
ecryptfs: ->f_op is never NULL
android: ->f_op is never NULL
nouveau: __iomem misannotations
missing annotation in fs/file.c
fs: namespace: suppress 'may be used uninitialized' warnings
...
Pull security subsystem updates from James Morris.
Mostly ima, selinux, smack and key handling updates.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits)
integrity: do zero padding of the key id
KEYS: output last portion of fingerprint in /proc/keys
KEYS: strip 'id:' from ca_keyid
KEYS: use swapped SKID for performing partial matching
KEYS: Restore partial ID matching functionality for asymmetric keys
X.509: If available, use the raw subjKeyId to form the key description
KEYS: handle error code encoded in pointer
selinux: normalize audit log formatting
selinux: cleanup error reporting in selinux_nlmsg_perm()
KEYS: Check hex2bin()'s return when generating an asymmetric key ID
ima: detect violations for mmaped files
ima: fix race condition on ima_rdwr_violation_check and process_measurement
ima: added ima_policy_flag variable
ima: return an error code from ima_add_boot_aggregate()
ima: provide 'ima_appraise=log' kernel option
ima: move keyring initialization to ima_init()
PKCS#7: Handle PKCS#7 messages that contain no X.509 certs
PKCS#7: Better handling of unsupported crypto
KEYS: Overhaul key identification when searching for asymmetric keys
KEYS: Implement binary asymmetric key ID handling
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Hhee
-----END PGP SIGNATURE-----
Merge tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux
Pull file locking related changes from Jeff Layton:
"This release is a little more busy for file locking changes than the
last:
- a set of patches from Kinglong Mee to fix the lockowner handling in
knfsd
- a pile of cleanups to the internal file lease API. This should get
us a bit closer to allowing for setlease methods that can block.
There are some dependencies between mine and Bruce's trees this cycle,
and I based my tree on top of the requisite patches in Bruce's tree"
* tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux: (26 commits)
locks: fix fcntl_setlease/getlease return when !CONFIG_FILE_LOCKING
locks: flock_make_lock should return a struct file_lock (or PTR_ERR)
locks: set fl_owner for leases to filp instead of current->files
locks: give lm_break a return value
locks: __break_lease cleanup in preparation of allowing direct removal of leases
locks: remove i_have_this_lease check from __break_lease
locks: move freeing of leases outside of i_lock
locks: move i_lock acquisition into generic_*_lease handlers
locks: define a lm_setup handler for leases
locks: plumb a "priv" pointer into the setlease routines
nfsd: don't keep a pointer to the lease in nfs4_file
locks: clean up vfs_setlease kerneldoc comments
locks: generic_delete_lease doesn't need a file_lock at all
nfsd: fix potential lease memory leak in nfs4_setlease
locks: close potential race in lease_get_mtime
security: make security_file_set_fowner, f_setown and __f_setown void return
locks: consolidate "nolease" routines
locks: remove lock_may_read and lock_may_write
lockd: rip out deferred lock handling from testlock codepath
NFSD: Get reference of lockowner when coping file_lock
...
Now that d_invalidate can no longer fail, stop returning a useless
return code. For the few callers that checked the return code update
remove the handling of d_invalidate failure.
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In later patches, we're going to add a new lock_manager_operation to
finish setting up the lease while still holding the i_lock. To do
this, we'll need to pass a little bit of info in the fcntl setlease
case (primarily an fasync structure). Plumb the extra pointer into
there in advance of that.
We declare this pointer as a void ** to make it clear that this is
private info, and that the caller isn't required to set this unless
the lm_setup specifically requires it.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If we got a reconnect error from async readv we re-add pages back
to page_list and continue loop. That is wrong because these pages
have been already added to the pagecache but page_list has pages that
have not been added to the pagecache yet. This ends up with a general
protection fault in put_pages after readpages. Fix it by not retrying
the read of these pages and falling back to readpage instead.
Fixes debian bug 762306
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
Changeset eb85d94bd introduced a problem where if a cifs open
fails during query info of a file we
will still try to close the file (happens with certain types
of reparse points) even though the file handle is not valid.
In addition for SMB2/SMB3 we were not mapping the return code returned
by Windows when trying to open a file (like a Windows NFS symlink)
which is a reparse point.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
CC: stable <stable@vger.kernel.org> #v3.13+
A previous patch added a ->match_preparse() method to the key type. This is
allowed to override the function called by the iteration algorithm.
Therefore, we can just set a default that simply checks for an exact match of
the key description with the original criterion data and allow match_preparse
to override it as needed.
The key_type::match op is then redundant and can be removed, as can the
user_match() function.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
If the mfsymlinks file size has changed (e.g. the file no longer
represents an emulated symlink) we were not returning an error properly.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
cifs provides two dummy functions 'sess_auth_lanman' and
'sess_auth_kerberos' for the case in which the respective
features are not defined. However, the caller is also under
an #ifdef, so we just get warnings about unused code:
fs/cifs/sess.c:1109:1: warning: 'sess_auth_kerberos' defined but not used [-Wunused-function]
sess_auth_kerberos(struct sess_data *sess_data)
Removing the dead functions gets rid of the warnings without
any downsides that I can see.
(Yalin Wang reported the identical problem and fix so added him)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yalin Wang <yalin.wang@sonymobile.com>
Signed-off-by: Steve French <smfrench@gmail.com>
This reverts commit 52a3624444.
Causes rmmod to fail for at least 7 seconds after unmount which
makes automated testing a little harder when reloading cifs.ko
between test runs.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
CC: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We were not checking for symlink support properly for SMB2/SMB3
mounts so could oops when mounted with mfsymlinks when try
to create symlink when mfsymlinks on smb2/smb3 mounts
Signed-off-by: Steve French <smfrench@gmail.com>
Cc: <stable@vger.kernel.org> # 3.14+
CC: Sachin Prabhu <sprabhu@redhat.com>
xfstest generic/258 sets the time on a file to a negative value
(before 1970) which fails since do_div can not handle negative
numbers. In addition 'normal' division of 64 bit values does
not build on 32 bit arch so have to workaround this by special
casing negative values in cifs_NTtimeToUnix
Samba server also has a bug with this (see samba bugzilla 7771)
but it works to Windows server.
Signed-off-by: Steve French <smfrench@gmail.com>
Clarify descriptions of SMB2 and SMB3 support in Kconfig
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
The existing code uses the old MAX_NAME constant. This causes
XFS test generic/013 to fail. Fix it by replacing MAX_NAME with
PATH_MAX that SMB1 uses. Also remove an unused MAX_NAME constant
definition.
Cc: <stable@vger.kernel.org> # v3.7+
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
The existing code calls server->ops->close() that is not
right. This causes XFS test generic/310 to fail. Fix this
by using server->ops->closedir() function.
Cc: <stable@vger.kernel.org> # v3.7+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
CIFS servers process nlink counts differently for files and directories.
In cifs_rename() if we the request fails on the existing target, we
try to remove it through cifs_unlink() but this is not what we want
to do for directories. As the result the following sequence of commands
mkdir {1,2}; mv -T 1 2; rmdir {1,2}; mkdir {1,2}; echo foo > 2/bar
and XFS test generic/023 fail with -ENOENT error. That's why the second
mkdir reuses the existing inode (target inode of the mv -T command) with
S_DEAD flag.
Fix this by checking whether the target is directory or not and
calling cifs_rmdir() rather than cifs_unlink() for directories.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
There is no need to explicitly send SIGKILL to cifs_demultiplex_thread
as it is calling module_put_and_exit to exit cleanly.
socket sk_rcvtimeo is set to 7 HZ so the thread will wake up in 7 seconds and
clean itself.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Currently cifs have all or nothing approach for directIO operations.
cache=strict mode does not allow directIO while cache=none mode performs
all the operations as directIO even when user does not specify O_DIRECT
flag. This patch enables strict cache mode to honour directIO semantics.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Steve French <smfrench@gmail.com>
In case of error, goto ssetup_exit can be hit and we could end up using
uninitialized value of resp_buftype
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Unlikely but possible. When password is supplied multiple times, we have
to free the previous allocation.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Steve French <smfrench@gmail.com>
When kzalloc fails, we will end up doing NULL pointer derefrence
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pull cifs fixes from Steve French:
"Most important fixes in this set include three SMB3 fixes for stable
(including fix for possible kernel oops), and a workaround to allow
writes to Mac servers (only cifs dialect, not more current SMB2.1,
worked to Mac servers). Also fallocate support added, and lease fix
from Jeff"
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
[SMB3] Enable fallocate -z support for SMB3 mounts
enable fallocate punch hole ("fallocate -p") for SMB3
Incorrect error returned on setting file compressed on SMB2
CIFS: Fix wrong directory attributes after rename
CIFS: Fix SMB2 readdir error handling
[CIFS] Possible null ptr deref in SMB2_tcon
[CIFS] Workaround MacOS server problem with SMB2.1 write response
cifs: handle lease F_UNLCK requests properly
Cleanup sparse file support by creating worker function for it
Add sparse file support to SMB2/SMB3 mounts
Add missing definitions for CIFS File System Attributes
cifs: remove unused function cifs_oplock_break_wait
fallocate -z (FALLOC_FL_ZERO_RANGE) can map to SMB3
FSCTL_SET_ZERO_DATA SMB3 FSCTL but FALLOC_FL_ZERO_RANGE
when called without the FALLOC_FL_KEEPSIZE flag set could want
the file size changed so we can not support that subcase unless
the file is cached (and thus we know the file size).
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Implement FALLOC_FL_PUNCH_HOLE (which does not change the file size
fortunately so this matches the behavior of the equivalent SMB3
fsctl call) for SMB3 mounts. This allows "fallocate -p" to work.
It requires that the server support setting files as sparse
(which Windows allows).
Signed-off-by: Steve French <smfrench@gmail.com>
When the server (for an SMB2 or SMB3 mount) doesn't support
an ioctl (such as setting the compressed flag
on a file) we were incorrectly returning EIO instead
of EOPNOTSUPP, this is confusing e.g. doing chattr +c to a file
on a non-btrfs Samba partition, now the error returned is more
intuitive to the user. Also fixes error mapping on setting
hardlink to servers which don't support that.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
When we requests rename we also need to update attributes
of both source and target parent directories. Not doing it
causes generic/309 xfstest to fail on SMB2 mounts. Fix this
by marking these directories for force revalidating.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
SMB2 servers indicates the end of a directory search with
STATUS_NO_MORE_FILE error code that is not processed now.
This causes generic/257 xfstest to fail. Fix this by triggering
the end of search by this error code in SMB2_query_directory.
Also when negotiating CIFS protocol we tell the server to close
the search automatically at the end and there is no need to do
it itself. In the case of SMB2 protocol, we need to close it
explicitly - separate close directory checks for different
protocols.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
As Raphael Geissert pointed out, tcon_error_exit can dereference tcon
and there is one path in which tcon can be null.
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org> # v3.7+
Reported-by: Raphael Geissert <geissert@debian.org>
response
Writes fail to Mac servers with SMB2.1 mounts (works with cifs though) due
to them sending an incorrect RFC1001 length for the SMB2.1 Write response.
Workaround this problem. MacOS server sends a write response with 3 bytes
of pad beyond the end of the SMB itself. The RFC1001 length is 3 bytes
more than the sum of the SMB2.1 header length + the write reponse.
Incorporate feedback from Jeff and JRA to allow servers to send
a tcp frame that is even more than three bytes too long
(ie much longer than the SMB2/SMB3 request that it contains) but
we do log it once now. In the earlier version of the patch I had
limited how far off the length field could be before we fail the request.
Signed-off-by: Steve French <smfrench@gmail.com>
Currently any F_UNLCK request for a lease just gets back -EAGAIN. Allow
them to go immediately to generic_setlease instead.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Simply move code to new function (for clarity). Function sets or clears
the sparse file attribute flag.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Many Linux filesystes make a file "sparse" when extending
a file with ftruncate. This does work for CIFS to Samba
(only) but not for SMB2/SMB3 (to Samba or Windows) since
there is a "set sparse" fsctl which is supposed to be
sent to mark a file as sparse.
This patch marks a file as sparse by sending this simple
set sparse fsctl if it is extended more than 2 pages.
It has been tested to Windows 8.1, Samba and various
SMB2/SMB3 servers which do support setting sparse (and
MacOS which does not appear to support the fsctl yet).
If a server share does not support setting a file
as sparse, then we do not retry setting sparse on that
share.
The disk space savings for sparse files can be quite
large (even more significant on Windows servers than Samba).
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Pull vfs updates from Al Viro:
"Stuff in here:
- acct.c fixes and general rework of mnt_pin mechanism. That allows
to go for delayed-mntput stuff, which will permit mntput() on deep
stack without worrying about stack overflows - fs shutdown will
happen on shallow stack. IOW, we can do Eric's umount-on-rmdir
series without introducing tons of stack overflows on new mntput()
call chains it introduces.
- Bruce's d_splice_alias() patches
- more Miklos' rename() stuff.
- a couple of regression fixes (stable fodder, in the end of branch)
and a fix for API idiocy in iov_iter.c.
There definitely will be another pile, maybe even two. I'd like to
get Eric's series in this time, but even if we miss it, it'll go right
in the beginning of for-next in the next cycle - the tricky part of
prereqs is in this pile"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
fix copy_tree() regression
__generic_file_write_iter(): fix handling of sync error after DIO
switch iov_iter_get_pages() to passing maximal number of pages
fs: mark __d_obtain_alias static
dcache: d_splice_alias should detect loops
exportfs: update Exporting documentation
dcache: d_find_alias needn't recheck IS_ROOT && DCACHE_DISCONNECTED
dcache: remove unused d_find_alias parameter
dcache: d_obtain_alias callers don't all want DISCONNECTED
dcache: d_splice_alias should ignore DCACHE_DISCONNECTED
dcache: d_splice_alias mustn't create directory aliases
dcache: close d_move race in d_splice_alias
dcache: move d_splice_alias
namei: trivial fix to vfs_rename_dir comment
VFS: allow ->d_manage() to declare -EISDIR in rcu_walk mode.
cifs: support RENAME_NOREPLACE
hostfs: support rename flags
shmem: support RENAME_EXCHANGE
shmem: support RENAME_NOREPLACE
btrfs: add RENAME_NOREPLACE
...
Commit 743162013d ("sched: Remove proliferation of wait_on_bit() action
functions") has removed the call to cifs_oplock_break_wait, making this
function unused; remove it.
This fixes the following compilation warning:
fs/cifs/misc.c:578:1: warning: ‘cifs_oplock_break_wait’ defined but not used [-Wunused-function]
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pull CIFS updates from Steve French:
"The most visible change in this set is the additional of multi-credit
support for SMB2/SMB3 which dramatically improves the large file i/o
performance for these dialects and significantly increases the maximum
i/o size used on the wire for SMB2/SMB3.
Also reconnection behavior after network failure is improved"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (35 commits)
Add worker function to set allocation size
[CIFS] Fix incorrect hex vs. decimal in some debug print statements
update CIFS TODO list
Add Pavel to contributor list in cifs AUTHORS file
Update cifs version
CIFS: Fix STATUS_CANNOT_DELETE error mapping for SMB2
CIFS: Optimize readpages in a short read case on reconnects
CIFS: Optimize cifs_user_read() in a short read case on reconnects
CIFS: Improve indentation in cifs_user_read()
CIFS: Fix possible buffer corruption in cifs_user_read()
CIFS: Count got bytes in read_into_pages()
CIFS: Use separate var for the number of bytes got in async read
CIFS: Indicate reconnect with ECONNABORTED error code
CIFS: Use multicredits for SMB 2.1/3 reads
CIFS: Fix rsize usage for sync read
CIFS: Fix rsize usage in user read
CIFS: Separate page reading from user read
CIFS: Fix rsize usage in readpages
CIFS: Separate page search from readpages
CIFS: Use multicredits for SMB 2.1/3 writes
...
This flag gives CIFS the ability to support its native rename semantics.
Implementation is simple: just bail out before trying to hack around the
noreplace semantics.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Adds setinfo worker function for SMB2/SMB3 support of SET_ALLOCATION_INFORMATION
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Joe Perches and Hans Wennborg noticed that various places in the
kernel were printing decimal numbers with 0x prefix.
printk("0x%d") or equivalent
This fixes the instances of this in the cifs driver.
CC: Hans Wennborg <hans@hanshq.net>
CC: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The existing mapping causes unlink() call to return error after delete
operation. Changing the mapping to -EACCES makes the client process
the call like CIFS protocol does - reset dos attributes with ATTR_READONLY
flag masked off and retry the operation.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
by marking pages with a data from a partially received response up-to-date.
This is suitable for non-signed connections.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
by filling the output buffer with a data got from a partially received
response and requesting the remaining data from the server. This is
suitable for non-signed connections.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If there was a short read in the middle of the rdata list,
we can end up with a corrupt output buffer.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
that let us know how many bytes we have already got before reconnect.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
and don't mix it with the number of bytes that was requested.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If we negotiate SMB 2.1 and higher version of the protocol and
a server supports large read buffer size, we need to consume 1
credit per 65536 bytes. So, we need to know how many credits
we have and obtain the required number of them before constructing
a readdata structure in readpages and user read.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If a server changes maximum buffer size for read requests (rsize)
on reconnect we can fail on repeating with a big size buffer on
-EAGAIN error in cifs_read. Fix this by checking rsize all the
time before repeating requests.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If a server changes maximum buffer size for read (rsize) requests
on reconnect we can fail on repeating with a big size buffer on
-EAGAIN error in user read. Fix this by checking rsize all the
time before repeating requests.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If a server changes maximum buffer size for read (rsize) requests
on reconnect we can fail on repeating with a big size buffer on
-EAGAIN error in readpages. Fix this by checking rsize all the
time before repeating requests.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If we negotiate SMB 2.1 and higher version of the protocol and
a server supports large write buffer size, we need to consume 1
credit per 65536 bytes. So, we need to know how many credits
we have and obtain the required number of them before constructing
a writedata structure in writepages and iovec write.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If a server change maximum buffer size for write (wsize) requests
on reconnect we can fail on repeating with a big size buffer on
-EAGAIN error in iovec write. Fix this by checking wsize all the
time before repeating request in iovec write.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If wsize changes on reconnect we need to use new writedata structure
that for retrying.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If a server change maximum buffer size for write (wsize) requests
on reconnect we can fail on repeating with a big size buffer on
-EAGAIN error in writepages. Fix this by checking wsize all the
time before repeating request in writepages.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
The recent session setup patch set
(cifs-Separate-rawntlmssp-auth-from-CIFS_SessSetup.patch)
had introduced a trivial sparse build warning.
Signed-off-by: Steve French <smfrench@gmail.com>
Cc: Sachin Prabhu <sprabhu@redhat.com>
If we get into read_into_pages() from cifs_readv_receive() and then
loose a network, we issue cifs_reconnect that moves all mids to
a private list and issue their callbacks. The callback of the async
read request sets a mid to retry, frees it and wakes up a process
that waits on the rdata completion.
After the connection is established we return from read_into_pages()
with a short read, use the mid that was freed before and try to read
the remaining data from the a newly created socket. Both actions are
not what we want to do. In reconnect cases (-EAGAIN) we should not
mask off the error with a short read but should return the error
code instead.
Acked-by: Jeff Layton <jlayton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Separate rawntlmssp authentication from CIFS_SessSetup(). Also cleanup
CIFS_SessSetup() since we no longer do any auth within it.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
In preparation for splitting CIFS_SessSetup() into smaller more
manageable chunks, we first add helper functions.
We then proceed to split out lanman auth out of CIFS_SessSetup()
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The functionality provided by free_rsp_buf() is duplicated in a number
of places. Replace these instances with a call to free_rsp_buf().
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
It is currently not possible for various wait_on_bit functions
to implement a timeout.
While the "action" function that is called to do the waiting
could certainly use schedule_timeout(), there is no way to carry
forward the remaining timeout after a false wake-up.
As false-wakeups a clearly possible at least due to possible
hash collisions in bit_waitqueue(), this is a real problem.
The 'action' function is currently passed a pointer to the word
containing the bit being waited on. No current action functions
use this pointer. So changing it to something else will be a
little noisy but will have no immediate effect.
This patch changes the 'action' function to take a pointer to
the "struct wait_bit_key", which contains a pointer to the word
containing the bit so nothing is really lost.
It also adds a 'private' field to "struct wait_bit_key", which
is initialized to zero.
An action function can now implement a timeout with something
like
static int timed_out_waiter(struct wait_bit_key *key)
{
unsigned long waited;
if (key->private == 0) {
key->private = jiffies;
if (key->private == 0)
key->private -= 1;
}
waited = jiffies - key->private;
if (waited > 10 * HZ)
return -EAGAIN;
schedule_timeout(waited - 10 * HZ);
return 0;
}
If any other need for context in a waiter were found it would be
easy to use ->private for some other purpose, or even extend
"struct wait_bit_key".
My particular need is to support timeouts in nfs_release_page()
to avoid deadlocks with loopback mounted NFS.
While wait_on_bit_timeout() would be a cleaner interface, it
will not meet my need. I need the timeout to be sensitive to
the state of the connection with the server, which could change.
So I need to use an 'action' interface.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051604.28027.41257.stgit@notabene.brown
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current "wait_on_bit" interface requires an 'action'
function to be provided which does the actual waiting.
There are over 20 such functions, many of them identical.
Most cases can be satisfied by one of just two functions, one
which uses io_schedule() and one which just uses schedule().
So:
Rename wait_on_bit and wait_on_bit_lock to
wait_on_bit_action and wait_on_bit_lock_action
to make it explicit that they need an action function.
Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io
which are *not* given an action function but implicitly use
a standard one.
The decision to error-out if a signal is pending is now made
based on the 'mode' argument rather than being encoded in the action
function.
All instances of the old wait_on_bit and wait_on_bit_lock which
can use the new version have been changed accordingly and their
action functions have been discarded.
wait_on_bit{_lock} does not return any specific error code in the
event of a signal so the caller must check for non-zero and
interpolate their own error code as appropriate.
The wait_on_bit() call in __fscache_wait_on_invalidate() was
ambiguous as it specified TASK_UNINTERRUPTIBLE but used
fscache_wait_bit_interruptible as an action function.
David Howells confirms this should be uniformly
"uninterruptible"
The main remaining user of wait_on_bit{,_lock}_action is NFS
which needs to use a freezer-aware schedule() call.
A comment in fs/gfs2/glock.c notes that having multiple 'action'
functions is useful as they display differently in the 'wchan'
field of 'ps'. (and /proc/$PID/wchan).
As the new bit_wait{,_io} functions are tagged "__sched", they
will not show up at all, but something higher in the stack. So
the distinction will still be visible, only with different
function names (gds2_glock_wait versus gfs2_glock_dq_wait in the
gfs2/glock.c case).
Since first version of this patch (against 3.15) two new action
functions appeared, on in NFS and one in CIFS. CIFS also now
uses an action function that makes the same freezer aware
schedule call as NFS.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: David Howells <dhowells@redhat.com> (fscache, keys)
Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2)
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When we SMB3 mounted with mapchars (to allow reserved characters : \ / > < * ?
via the Unicode Windows to POSIX remap range) empty paths
(eg when we open "" to query the root of the SMB3 directory on mount) were not
null terminated so we sent garbarge as a path name on empty paths which caused
SMB2/SMB2.1/SMB3 mounts to fail when mapchars was specified. mapchars is
particularly important since Unix Extensions for SMB3 are not supported (yet)
Signed-off-by: Steve French <smfrench@gmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Before satisfying a read with cache=loose, we should always check
that the pagecache is valid before allowing a read to be satisfied
out of it.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Steve French <smfrench@gmail.com>
commit d81b8a40e2
("CIFS: Cleanup cifs open codepath")
changed disposition to FILE_OPEN.
Signed-off-by: Björn Baumbach <bb@sernet.de>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Cc: <stable@vger.kernel.org> # v3.14+
Cc: Pavel Shilovsky <piastry@etersoft.ru>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pull vfs updates from Al Viro:
"This the bunch that sat in -next + lock_parent() fix. This is the
minimal set; there's more pending stuff.
In particular, I really hope to get acct.c fixes merged this cycle -
we need that to deal sanely with delayed-mntput stuff. In the next
pile, hopefully - that series is fairly short and localized
(kernel/acct.c, fs/super.c and fs/namespace.c). In this pile: more
iov_iter work. Most of prereqs for ->splice_write with sane locking
order are there and Kent's dio rewrite would also fit nicely on top of
this pile"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
lock_parent: don't step on stale ->d_parent of all-but-freed one
kill generic_file_splice_write()
ceph: switch to iter_file_splice_write()
shmem: switch to iter_file_splice_write()
nfs: switch to iter_splice_write_file()
fs/splice.c: remove unneeded exports
ocfs2: switch to iter_file_splice_write()
->splice_write() via ->write_iter()
bio_vec-backed iov_iter
optimize copy_page_{to,from}_iter()
bury generic_file_aio_{read,write}
lustre: get rid of messing with iovecs
ceph: switch to ->write_iter()
ceph_sync_direct_write: stop poking into iov_iter guts
ceph_sync_read: stop poking into iov_iter guts
new helper: copy_page_from_iter()
fuse: switch to ->write_iter()
btrfs: switch to ->write_iter()
ocfs2: switch to ->write_iter()
xfs: switch to ->write_iter()
...
Pull CIFS fixes from Steve French.
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Fix memory leaks in SMB2_open
cifs: ensure that vol->username is not NULL before running strlen on it
Clarify SMB2/SMB3 create context and add missing ones
Do not send ClientGUID on SMB2.02 dialect
cifs: Set client guid on per connection basis
fs/cifs/netmisc.c: convert printk to pr_foo()
fs/cifs/cifs.c: replace seq_printf by seq_puts
Update cifs version number to 2.03
fs: cifs: new helper: file_inode(file)
cifs: fix potential races in cifs_revalidate_mapping
cifs: new helper function: cifs_revalidate_mapping
cifs: convert booleans in cifsInodeInfo to a flags field
cifs: fix cifs_uniqueid_to_ino_t not to ever return 0
Dan Carpenter says:
The patch 04febabcf5: "cifs: sanitize username handling" from Jan
17, 2012, leads to the following static checker warning:
fs/cifs/connect.c:2231 match_session()
error: we previously assumed 'vol->username' could be null (see line 2228)
fs/cifs/connect.c
2219 /* NULL username means anonymous session */
2220 if (ses->user_name == NULL) {
2221 if (!vol->nullauth)
2222 return 0;
2223 break;
2224 }
2225
2226 /* anything else takes username/password */
2227 if (strncmp(ses->user_name,
2228 vol->username ? vol->username : "",
^^^^^^^^^^^^^
We added this check for vol->username here.
2229 CIFS_MAX_USERNAME_LEN))
2230 return 0;
2231 if (strlen(vol->username) != 0 &&
^^^^^^^^^^^^^
But this dereference is not checked.
2232 ses->password != NULL &&
2233 strncmp(ses->password,
2234 vol->password ? vol->password : "",
2235 CIFS_MAX_PASSWORD_LEN))
2236 return 0;
...fix this by ensuring that vol->username is not NULL before running
strlen on it.
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Clarify comments for create contexts which we do send,
and fix typo in one create context definition and add
newer SMB3 create contexts to the list.
Signed-off-by: Steve French <smfrench@gmail.com>
ClientGUID must be zero for SMB2.02 dialect. See section 2.2.3
of MS-SMB2. For SMB2.1 and later it must be non-zero.
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Sachin Prabhu <sprabhu@redhat.com>
When mounting from a Windows 2012R2 server, we hit the following
problem:
1) Mount with any of the following versions - 2.0, 2.1 or 3.0
2) unmount
3) Attempt a mount again using a different SMB version >= 2.0.
You end up with the following failure:
Status code returned 0xc0000203 STATUS_USER_SESSION_DELETED
CIFS VFS: Send error in SessSetup = -5
CIFS VFS: cifs_mount failed w/return code = -5
I cannot reproduce this issue using a Windows 2008 R2 server.
This appears to be caused because we use the same client guid for the
connection on first mount which we then disconnect and attempt to mount
again using a different protocol version. By generating a new guid each
time a new connection is Negotiated, we avoid hitting this problem.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Also fixes array checkpatch warning and converts it to static const
(suggested by Joe Perches).
Cc: Joe Perches <joe@perches.com>
Cc: Steve French <sfrench@samba.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steve French <smfrench@gmail.com>
Replace seq_printf where possible
Cc: Steve French <sfrench@samba.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steve French <smfrench@gmail.com>
