Video Engine Unit (VEU) is an IP block, found in multiple SuperH and ARM-
based sh-mobile and r-mobile SoCs, capable of processing video data. It
can perform colour-space conversion, scaling and several filtering
transformations. This patch adds an initial implementation of a mem2mem
V4L2 driver for VEU. So far only conversion from NV12 to RGB565 is
supported. Further functionality shall be added in the future.
This driver is based on a VEU vidix driver by Magnus Damm.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The mem2mem core doesn't change struct m2m_ops, provided by the driver,
make references to it const.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Enumerating formats for output overlays doesn't make sense, as the pixel
format is defined by the display API, not the V4L2 API. Drop the
vidioc_enum_fmt_vid_overlay ioctl operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add basic DVB-S2 support for the Hauppauge HVR-4400 PCIe board.
Thanks to Antti Palosaari and Devin Heitmueller for their
suggestions and testing.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The default i2c address for the tuner is 0x14,
allow this to be overridden with a configuration parameter
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pull the analog frontend setup code out of au0828_card_setup into its
own seperate function, au0828_card_analog_fe_setup().
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch removes the dependendency of VIDEO_AU0828 on VIDEO_V4L2 by
creating a new Kconfig option, VIDEO_AU0828_V4L2, which enables analog
video capture support and depends on VIDEO_V4L2 itself.
With VIDEO_AU0828_V4L2 disabled, the driver will only support digital
television and will not depend on the v4l2-core. With VIDEO_AU0828_V4L2
enabled, the driver will be built with the analog v4l2 support included.
By default, the VIDEO_AU0828_V4L2 option will be set to Y, so as to
preserve the original behavior.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
sh-vou causes several "may be used uninitialized" warnings. Even though
they all are purely theoretical, it is better to fix them.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sometimes VIDIOC_S_CROP ioctl doesn't work, soc-camera driver reports:
soc-camera-pdrv soc-camera-pdrv.0: S_CROP denied: getting current crop failed
The VIDIOC_G_CROP documentation states that the type field needs to be
set to the respective buffer type when querying, so the check in .g_crop()
of the subdevices returns -EINVAL if the type is not set properly. Here the
uninitialized local variable 'current_crop' is passed to the .g_crop() and
this leads to the observed error. Initialize the type field of the local
'current_crop' before get_crop call.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
On systems where it cannot be assured that enough continous memory is available
all the time it can be very useful to only allocate the memory once when it is
needed the first time. Afterwards the initially allocated memory will be
reused, so it is ensured that the memory will stay available until the driver
is unloaded.
[mchehab@redhat.com: Codingstyle fixups]
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pull media fixes from Mauro Carvalho Chehab:
"Some driver fixes for s5p/exynos (mostly race fixes)"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] s5p-mfc: Handle multi-frame input buffer
[media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism
[media] exynos-gsc: Add missing video device vfl_dir flag initialization
[media] exynos-gsc: Fix settings for input and output image RGB type
[media] exynos-gsc: Don't use mutex_lock_interruptible() in device release()
[media] fimc-lite: Don't use mutex_lock_interruptible() in device release()
[media] s5p-fimc: Don't use mutex_lock_interruptible() in device release()
[media] s5p-fimc: Prevent race conditions during subdevs registration
Merge 'block-dev' branch.
I was going to just mark everything here for stable and leave it to the
3.8 merge window, but having decided on doing another -rc, I migth as
well merge it now.
This removes the bd_block_size_semaphore semaphore that was added in
this release to fix a race condition between block size changes and
block IO, and replaces it with atomicity guaratees in fs/buffer.c
instead, along with simplifying fs/block-dev.c.
This removes more lines than it adds, makes the code generally simpler,
and avoids the latency/rt issues that the block size semaphore
introduced for mount.
I'm not happy with the timing, but it wouldn't be much better doing this
during the merge window and then having some delayed back-port of it
into stable.
* block-dev:
blkdev_max_block: make private to fs/buffer.c
direct-io: don't read inode->i_blkbits multiple times
blockdev: remove bd_block_size_semaphore again
fs/buffer.c: make block-size be per-page and protected by the page lock
Pull networking fixes from David Miller:
1) 8139cp leaks memory in error paths, from Francois Romieu.
2) do_tcp_sendpages() cannot handle order > 0 pages, but they can
certainly arrive there now, fix from Eric Dumazet.
3) Race condition and sysfs fixes in bonding from Nikolay Aleksandrov.
4) Remain-on-Channel fix in mac80211 from Felix Liao.
5) CCK rate calculation fix in iwlwifi, from Emmanuel Grumbach.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
8139cp: fix coherent mapping leak in error path.
tcp: fix crashes in do_tcp_sendpages()
bonding: fix race condition in bonding_store_slaves_active
bonding: make arp_ip_target parameter checks consistent with sysfs
bonding: fix miimon and arp_interval delayed work race conditions
mac80211: fix remain-on-channel (non-)cancelling
iwlwifi: fix the basic CCK rates calculation
cp_open
[...]
rc = cp_alloc_rings(cp);
if (rc)
return rc;
cp_alloc_rings
[...]
mem = dma_alloc_coherent(&cp->pdev->dev, CP_RING_BYTES,
&cp->ring_dma, GFP_KERNEL);
- cp_alloc_rings never frees the coherent mapping it allocates
- neither do cp_open when cp_alloc_rings fails
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull target fix from Nicholas Bellinger:
"So just a single target fix for v3.7.0 this time around from Roland to
address a aborted command bug w/ tcm_qla2xxx fabric ports.
Also, there is one outstanding IBLOCK + virtio-blk bug that is still
being tracked down effecting v3.6.x, but AFAICT thus far this appears
to be a bug outside of target code."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Fix handling of aborted commands
Pull DRM fixes from Dave Airlie:
"Just driver fixes, nothing major, except maybe the Ironlake rc6
disable:
- intel:
* revert ironlake rc6 - we still have one ilk regression, but this
gets rid of one big one
* turn off cloning
* a directed fix for Apple edp
- radeon: one modesetting fix
- exynos: minor fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
radeon: fix pll/ctrc mapping on dce2 and dce3 hardware
Revert "drm/i915: enable rc6 on ilk again"
drm/i915: do not default to 18 bpp for eDP if missing from VBT
drm/exynos: Fix potential NULL pointer dereference in exynos_drm_encoder.c
drm/exynos: Make exynos4/5_fimd_driver_data static
drm/exynos: fix overlay updating issue
drm/exynos: remove unnecessary code.
drm/exynos: fix linux framebuffer address setting.
drm/i915: disable cloning on sdvo
Merge misc fixes from Andrew Morton:
"Seven fixes, some of them fingers-crossed :("
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (7 patches)
drivers/rtc/rtc-tps65910.c: fix invalid pointer access on _remove()
mm: soft offline: split thp at the beginning of soft_offline_page()
mm: avoid waking kswapd for THP allocations when compaction is deferred or contended
revert "Revert "mm: remove __GFP_NO_KSWAPD""
mm: vmscan: fix endless loop in kswapd balancing
mm/vmemmap: fix wrong use of virt_to_page
mm: compaction: fix return value of capture_free_page()
These were originally prepared by Krzysztof Halasa but not submitted
in time for v3.7 due to some confusion about how ixp4xx patches should
be handled. Jason Cooper thankfully offered to help out sending the
patches upstream through arm-soc now, but given the timing, we could
as well delay them for 3.8.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIVAwUAULdujWCrR//JCVInAQK5mA/+MTmqpabAIKAemk9CXZewNwJkdX2ILkce
+WcxQwfD/7xWCsLxSwVgBrrUmXiw9/EwJBIGti6JgMEFtMD70DwooSNnRejN+cTz
ZMJvoOzgRu5Q51SeX1V6x7xkNSVupMPEKt2ziBFUNyHCMTuEtZx8KXhmP5KTyP9e
ZyAXgrWpsna9OefbFa2qkYvTA243NBEreRRpxUJe582Y84GEXWCL47eqgRoflXmV
T+jPSCRsqcepxOnkCFYSmCp7J5EAQn1CcyfN11T8Jlj1Vr+ntjGtSKSQ6+uXxgqx
/kTRnpdXJsogX9q6M/AzOkqTugB8jOvL8TIVo7AJDDS4fOSllzQdTEqagmPtkZdT
jGavaEPy8F8mQOQJqmC9++AT0xhyiVhijAXSHxX1W+u9OmEw3+Mx/CTlR+QORr3p
AVUlmmFrGna0vk3iL4Ov1rZu5D647nfTmTQE4fvhV37U2GEP4nqcF08kUl3V0idg
xF1iEDBdtjgCOf2cCkTIj8X9xeuhoqVRdUp5w5Y8WrsfkzDigOgRJGgkJaafhymz
bRcpbB3NVXbIUhB45VWI4j9KO0O9ysboWe6ibWdSl2/bTD0J/MDcqLkr8r9yPQYV
IA8xuRE3/p+ZVt72YXAAuFSbwpVmLcZBX6vJuOvFR5gjFg1g1hAqQdBmFekh7QQZ
4S/xhOTTzLk=
=GlCa
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM ixp4xx bug fixes from Arnd Bergmann:
"These were originally prepared by Krzysztof Halasa but not submitted
in time for v3.7 due to some confusion about how ixp4xx patches should
be handled. Jason Cooper thankfully offered to help out sending the
patches upstream through arm-soc now, but given the timing, we could
as well delay them for 3.8."
* tag 'ixp4xx-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
IXP4xx: use __iomem for MMIO
IXP4xx: map CPU config registers within VMALLOC region.
IXP4xx: Always ioremap() Queue Manager MMIO region at boot.
ixp4xx: Declare MODULE_FIRMWARE usage
IXP4xx crypto: MOD_AES{128,192,256} already include key size.
WAN: Remove redundant HDLC info printed by IXP4xx HSS driver.
IXP4xx: Remove time limit for PCI TRDY to enable use of slow devices.
IXP4xx: ixp4xx_crypto driver requires Queue Manager and NPE drivers.
IXP4xx: HW pseudo-random generator is available on IXP45x/46x only.
IXP4xx: Fix off-by-one bug in Goramo MultiLink platform.
IXP4xx: Fix Goramo MultiLink platform compilation.
The tps65910_rtc data is registered as the platform driver data in
_probe(= ). Therefore the tps65910_rtc should be used on unregistering
the rtc device. And device pointer should be retrieved from the
platform_device structure.
This patch fixes the below oops:
Unable to handle kernel NULL pointer dereference at virtual address 00000008
Modules linked in: rtc_tps65910(-)
CPU: 0 Not tainted (3.7.0-rc7-next-20121128-g6b1f974-dirty #7)
PC is at tps65910_rtc_alarm_irq_enable+0x20/0x2c [rtc_tps65910]
(tps65910_rtc_alarm_irq_enable+0x20/0x2c [rtc_tps65910])
(tps65910_rtc_remove+0x18/0x28 [rtc_tps65910])
(platform_drv_remove+0x18/0x1c)
(__device_release_driver+0x70/0xcc)
(driver_detach+0xb4/0xb8)
(bus_remove_driver+0x7c/0xc0)
(sys_delete_module+0x148/0x21c)
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It apepars that this patch was innocent, and we hope that "mm: avoid
waking kswapd for THP allocations when compaction is deferred or
contended" will fix the final kswapd-spinning cause.
Cc: Zdenek Kabelac <zkabelac@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts the block-device direct access code to the previous
unlocked code, now that fs/buffer.c no longer needs external locking.
With this, fs/block_dev.c is back to the original version, apart from a
whitespace cleanup that I didn't want to revert.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Race between bonding_store_slaves_active() and slave manipulation
functions. The bond_for_each_slave use in bonding_store_slaves_active()
is not protected by any synchronization mechanism.
NULL pointer dereference is easy to reach.
Fixed by acquiring the bond->lock for the slave walk.
v2: Make description text < 75 columns
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The module can be loaded with arp_ip_target="255.255.255.255" which makes
it impossible to remove as the function in sysfs checks for that value,
so we make the parameter checks consistent with sysfs.
v2: Fix formatting
v3: Make description text < 75 columns
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
First I would give three observations which will be used later.
Observation 1: if (delayed_work_pending(wq)) cancel_delayed_work(wq)
This usage is wrong because the pending bit is cleared just before the
work's fn is executed and if the function re-arms itself we might end up
with the work still running. It's safe to call cancel_delayed_work_sync()
even if the work is not queued at all.
Observation 2: Use of INIT_DELAYED_WORK()
Work needs to be initialized only once prior to (de/en)queueing.
Observation 3: IFF_UP is set only after ndo_open is called
Related race conditions:
1. Race between bonding_store_miimon() and bonding_store_arp_interval()
Because of Obs.1 we can end up having both works enqueued.
2. Multiple races with INIT_DELAYED_WORK()
Since the works are not protected by anything between INIT_DELAYED_WORK()
and calls to (en/de)queue it is possible for races between the following
functions:
(races are also possible between the calls to INIT_DELAYED_WORK()
and workqueue code)
bonding_store_miimon() - bonding_store_arp_interval(), bond_close(),
bond_open(), enqueued functions
bonding_store_arp_interval() - bonding_store_miimon(), bond_close(),
bond_open(), enqueued functions
3. By Obs.1 we need to change bond_cancel_all()
Bugs 1 and 2 are fixed by moving all work initializations in bond_open
which by Obs. 2 and Obs. 3 and the fact that we make sure that all works
are cancelled in bond_close(), is guaranteed not to have any work
enqueued.
Also RTNL lock is now acquired in bonding_store_miimon/arp_interval so
they can't race with bond_close and bond_open. The opposing work is
cancelled only if the IFF_UP flag is set and it is cancelled
unconditionally. The opposing work is already cancelled if the interface
is down so no need to cancel it again. This way we don't need new
synchronizations for the bonding workqueue. These bugs (and fixes) are
tied together and belong in the same patch.
Note: I have left 1 line intentionally over 80 characters (84) because I
didn't like how it looks broken down. If you'd prefer it otherwise,
then simply break it.
v2: Make description text < 75 columns
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eliminate an erroneous invocation of rproc_shutdown inside
the error path of rproc_virtio_find_vqs.
Reported-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Pull networking fixes from David Miller:
"Some more fixes trickled in over the past few days:
1) PIM device names can overflow the IFNAMSIZ buffer unless we
properly limit the allowed indexes, fix from Eric Dumazet.
2) Under heavy load we can OOPS in icmp reply processing due to an
unchecked inet_putpeer() call. Fix from Neal Cardwell.
3) SCTP round trip calculations need to use 64-bit math to avoid
overflows, fix from Schoch Christian.
4) Fix a memory leak and an error return flub in SCTP and IRDA
triggerable by userspace. Fix from Tommi Rantala and found by the
syscall fuzzer (trinity).
5) MLX4 driver gives bogus size to memcpy() call, fix from Amir
Vadai.
6) Fix length calculation in VHOST descriptor translation, from
Michael S Tsirkin.
7) Ambassador ATM driver loops forever while loading firmware, fix
from Dan Carpenter.
8) Over MTU packets in openvswitch warn about wrong device, fix from
Jesse Gross.
9) Netfilter IPSET's netlink code can overrun a string buffer because
it's not properly limited to IFNAMSIZ. Fix from Florian Westphal.
10) PCAN USB driver sets wrong timestamp in SKB, from Oliver Hartkopp.
11) Make sure the RX ifindex always has a valid value in the CAN BCM
driver, even if we haven't received a frame yet. Fix also from
Oliver Hartkopp."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
team: fix hw_features setup
atm: forever loop loading ambassador firmware
vhost: fix length for cross region descriptor
irda: irttp: fix memory leak in irttp_open_tsap() error path
net: qmi_wwan: add Huawei E173
net/mlx4_en: Can set maxrate only for TC0
sctp: Error in calculation of RTTvar
sctp: fix -ENOMEM result with invalid user space pointer in sendto() syscall
sctp: fix memory leak in sctp_datamsg_from_user() when copy from user space fails
net: ipmr: limit MRT_TABLE identifiers
ipv4: avoid passing NULL to inet_putpeer() in icmpv4_xrlim_allow()
can: bcm: initialize ifindex for timeouts without previous frame reception
can: peak_usb: fix hwtstamp assignment
netfilter: ipset: fix netiface set name overflow
openvswitch: Store flow key len if ARP opcode is not request or reply.
openvswitch: Print device when warning about over MTU packets.
Do this in the same way bonding does. This fixed setup resolves performance
issues when using some cards with certain offloading.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
There was a forever loop introduced here when we converted this to
request_firmware() back in 2008.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a single descriptor crosses a region, the
second chunk length should be decremented
by size translated so far, instead it includes
the full descriptor length.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Huawei E173 is a QMI/wwan device which normally appear
as 12d1:1436 in Linux. The descriptors displayed in that
mode will be picked up by cdc_ether. But the modem has
another mode with a different device ID and a slightly
different set of descriptors. This is the mode used by
Windows like this:
3Modem: USB\VID_12D1&PID_140C&MI_00\6&3A1D2012&0&0000
Networkcard: USB\VID_12D1&PID_140C&MI_01\6&3A1D2012&0&0001
Appli.Inter: USB\VID_12D1&PID_140C&MI_02\6&3A1D2012&0&0002
PC UI Inter: USB\VID_12D1&PID_140C&MI_03\6&3A1D2012&0&0003
Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers must not rely on cpu_is_omap* macros (they will soon become
private). Use the ISP revision instead to identify the hardware.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Clock enable (disable) is split in two operations, prepare and enable
(disable and unprepare). Perform both when enabling/disabling the ISP
clocks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Support both grayscale (Y8) and Bayer (SBGGR8, SGBRG8, SGRBG8 and
SRGGB8) formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Use the dev_* message logging API instead of raw printk.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
No longer assume pad number 0 is the source pad of the external entity. Find
the source pad from the external entity and use it instead.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Configure CSI-2 phy based on platform data in the ISP driver. For that, the
new V4L2_CID_IMAGE_SOURCE_PIXEL_RATE control is used. Previously the same
was configured from the board code.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add PHY routing configuration for both 3430 and 3630. Also add register bit
definitions of CSIRXFE and CAMERA_PHY_CTRL registers on OMAP 3430 and 3630,
respectively.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add the registers used to configure the CSI-2 receiver PHY on OMAP3430 and
3630 and map them in the ISP driver. The register is part of the control
block but it only is needed by the ISP driver.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
