As Roopa noted today the biggest source of problems when configuring
bridge and ports is that the bridge MTU keeps changing automatically on
port events (add/del/changemtu). That leads to inconsistent behaviour
and network config software needs to chase the MTU and fix it on each
such event. Let's improve on that situation and allow for the user to
set any MTU within ETH_MIN/MAX limits, but once manually configured it
is the user's responsibility to keep it correct afterwards.
In case the MTU isn't manually set - the behaviour reverts to the
previous and the bridge follows the minimum MTU.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recently the bridge was changed to automatically set maximum MTU on port
events (add/del/changemtu) when vlan filtering is enabled, but that
actually changes behaviour in a way which breaks some setups and can lead
to packet drops. In order to still allow that maximum to be set while being
compatible, we add the ability for the user to tune the bridge MTU up to
the maximum when vlan filtering is enabled, but that has to be done
explicitly and all port events (add/del/changemtu) lead to resetting that
MTU to the minimum as before.
Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for your net-next
tree. This batch comes with more input sanitization for xtables to
address bug reports from fuzzers, preparation works to the flowtable
infrastructure and assorted updates. In no particular order, they are:
1) Make sure userspace provides a valid standard target verdict, from
Florian Westphal.
2) Sanitize error target size, also from Florian.
3) Validate that last rule in basechain matches underflow/policy since
userspace assumes this when decoding the ruleset blob that comes
from the kernel, from Florian.
4) Consolidate hook entry checks through xt_check_table_hooks(),
patch from Florian.
5) Cap ruleset allocations at 512 mbytes, 134217728 rules and reject
very large compat offset arrays, so we have a reasonable upper limit
and fuzzers don't exercise the oom-killer. Patches from Florian.
6) Several WARN_ON checks on xtables mutex helper, from Florian.
7) xt_rateest now has a hashtable per net, from Cong Wang.
8) Consolidate counter allocation in xt_counters_alloc(), from Florian.
9) Earlier xt_table_unlock() call in {ip,ip6,arp,eb}tables, patch
from Xin Long.
10) Set FLOW_OFFLOAD_DIR_* to IP_CT_DIR_* definitions, patch from
Felix Fietkau.
11) Consolidate code through flow_offload_fill_dir(), also from Felix.
12) Inline ip6_dst_mtu_forward() just like ip_dst_mtu_maybe_forward()
to remove a dependency with flowtable and ipv6.ko, from Felix.
13) Cache mtu size in flow_offload_tuple object, this is safe for
forwarding as f87c10a8aa describes, from Felix.
14) Rename nf_flow_table.c to nf_flow_table_core.o, to simplify too
modular infrastructure, from Felix.
15) Add rt0, rt2 and rt4 IPv6 routing extension support, patch from
Ahmed Abdelsalam.
16) Remove unused parameter in nf_conncount_count(), from Yi-Hung Wei.
17) Support for counting only to nf_conncount infrastructure, patch
from Yi-Hung Wei.
18) Add strict NFT_CT_{SRC_IP,DST_IP,SRC_IP6,DST_IP6} key datatypes
to nft_ct.
19) Use boolean as return value from ipt_ah and from IPVS too, patch
from Gustavo A. R. Silva.
20) Remove useless parameters in nfnl_acct_overquota() and
nf_conntrack_broadcast_help(), from Taehee Yoo.
21) Use ipv6_addr_is_multicast() from xt_cluster, also from Taehee Yoo.
22) Statify nf_tables_obj_lookup_byhandle, patch from Fengguang Wu.
23) Fix typo in xt_limit, from Geert Uytterhoeven.
24) Do no use VLAs in Netfilter code, again from Gustavo.
25) Use ADD_COUNTER from ebtables, from Taehee Yoo.
26) Bitshift support for CONNMARK and MARK targets, from Jack Ma.
27) Use pr_*() and add pr_fmt(), from Arushi Singhal.
28) Add synproxy support to ctnetlink.
29) ICMP type and IGMP matching support for ebtables, patches from
Matthias Schiffer.
30) Support for the revision infrastructure to ebtables, from
Bernie Harris.
31) String match support for ebtables, also from Bernie.
32) Documentation for the new flowtable infrastructure.
33) Use generic comparison functions in ebt_stp, from Joe Perches.
34) Demodularize filter chains in nftables.
35) Register conntrack hooks in case nftables NAT chain is added.
36) Merge assignments with return in a couple of spots in the
Netfilter codebase, also from Arushi.
37) Document that xtables percpu counters are stored in the same
memory area, from Ben Hutchings.
38) Revert mark_source_chains() sanity checks that break existing
rulesets, from Florian Westphal.
39) Use is_zero_ether_addr() in the ipset codebase, from Joe Perches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
One module per supported filter chain family type takes too much memory
for very little code - too much modularization - place all chain filter
definitions in one single file.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use WARN_ON() instead since it should not happen that neither family
goes over NFPROTO_NUMPROTO nor there is already a chain of this type
already registered.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use nft_ prefix. By when I added chain types, I forgot to use the
nftables prefix. Rename enum nft_chain_type to enum nft_chain_types too,
otherwise there is an overlap.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Instead of unnecessary const declarations, use the generic functions to
save a little object space.
$ size net/bridge/netfilter/ebt_stp.o*
text data bss dec hex filename
1250 144 0 1394 572 net/bridge/netfilter/ebt_stp.o.new
1344 144 0 1488 5d0 net/bridge/netfilter/ebt_stp.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently ebtables assumes that the revision number of all match
modules is 0, which is an issue when trying to use existing
xtables matches with ebtables. The solution is to modify ebtables
to allow extensions to specify a revision number, similar to
iptables. This gets passed down to the kernel, which is then able
to find the match module correctly.
To main binary backwards compatibility, the size of the ebt_entry
structures is not changed, only the size of the name field is
decreased by 1 byte to make room for the revision field.
Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Synchronous pernet_operations are not allowed anymore.
All are asynchronous. So, drop the structure member.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prefer the direct use of octal for permissions.
Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.
Miscellanea:
o Whitespace neatening around these conversions.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to use br_vlan_enabled() helper otherwise we'll break builds
without bridge vlans:
net/bridge//br_if.c: In function ‘br_mtu’:
net/bridge//br_if.c:458:8: error: ‘const struct net_bridge’ has no
member named ‘vlan_enabled’
if (br->vlan_enabled)
^
net/bridge//br_if.c:462:1: warning: control reaches end of non-void
function [-Wreturn-type]
}
^
scripts/Makefile.build:324: recipe for target 'net/bridge//br_if.o'
failed
Fixes: 419d14af9e ("bridge: Allow max MTU when multiple VLANs present")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the bridge is allowing multiple VLANs, some VLANs may have
different MTUs. Instead of choosing the minimum MTU for the
bridge interface, choose the maximum MTU of the bridge members.
With this the user only needs to set a larger MTU on the member
ports that are participating in the large MTU VLANS.
Signed-off-by: Chas Williams <3chas3@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fun set of conflict resolutions here...
For the mac80211 stuff, these were fortunately just parallel
adds. Trivially resolved.
In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.
In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.
The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.
The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:
====================
Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f95
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit b5ca15ad7e (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We already have ICMPv6 type/code matches (which can be used to distinguish
different types of MLD packets). Add support for IPv4 IGMP matches in the
same way.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We already have ICMPv6 type/code matches. This adds support for IPv4 ICMP
matches in the same way.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
xtables uses ADD_COUNTER macro to increase
packet and byte count. ebtables also can use this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ebt_among is special, it has a dynamic match size and is exempt
from the central size checks.
commit c4585a2823 ("bridge: ebt_among: add missing match size checks")
added validation for pool size, but missed fact that the macros
ebt_among_wh_src/dst can already return out-of-bound result because
they do not check value of wh_src/dst_ofs (an offset) vs. the size
of the match that userspace gave to us.
v2:
check that offset has correct alignment.
Paolo Abeni points out that we should also check that src/dst
wormhash arrays do not overlap, and src + length lines up with
start of dst (or vice versa).
v3: compact wormhash_sizes_valid() part
NB: Fixes tag is intentionally wrong, this bug exists from day
one when match was added for 2.6 kernel. Tag is there so stable
maintainers will notice this one too.
Tested with same rules from the earlier patch.
Fixes: c4585a2823 ("bridge: ebt_among: add missing match size checks")
Reported-by: <syzbot+bdabab6f1983a03fc009@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The last rule in the blob has next_entry offset that is same as total size.
This made "ebtables32 -A OUTPUT -d de:ad:be:ef:01:02" fail on 64 bit kernel.
Fixes: b718121685 ("netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsets")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
All of the conflicts were cases of overlapping changes.
In net/core/devlink.c, we have to make care that the
resouce size_params have become a struct member rather
than a pointer to such an object.
Signed-off-by: David S. Miller <davem@davemloft.net>
should have no impact, function still always returns 0.
This patch is only to ease review.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
These pernet_operations use nf_log_set() and nf_log_unset()
in their methods:
nf_log_bridge_net_ops
nf_log_arp_net_ops
nf_log_ipv4_net_ops
nf_log_ipv6_net_ops
nf_log_netdev_net_ops
Nobody can send such a packet to a net before it's became
registered, nobody can send a packet after all netdevices
are unregistered. So, these pernet_operations are able
to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations use ebt_register_table() and
ebt_unregister_table() to act on the tables, which
are used as argument in ebt_do_table(), called from
ebtables hooks.
Since there are no net-related bridge packets in-flight,
when the init and exit methods are called, these
pernet_operations are safe to be executed in parallel
with any other.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Put back reference on CLUSTERIP configuration structure from the
error path, patch from Florian Westphal.
2) Put reference on CLUSTERIP configuration instead of freeing it,
another cpu may still be walking over it, also from Florian.
3) Refetch pointer to IPv6 header from nf_nat_ipv6_manip_pkt() given
packet manipulation may reallocation the skbuff header, from Florian.
4) Missing match size sanity checks in ebt_among, from Florian.
5) Convert BUG_ON to WARN_ON in ebtables, from Florian.
6) Sanity check userspace offsets from ebtables kernel, from Florian.
7) Missing checksum replace call in flowtable IPv4 DNAT, from Felix
Fietkau.
8) Bump the right stats on checksum error from bridge netfilter,
from Taehee Yoo.
9) Unset interface flag in IPv6 fib lookups otherwise we get
misleading routing lookup results, from Florian.
10) Missing sk_to_full_sk() in ip6_route_me_harder() from Eric Dumazet.
11) Don't allow devices to be part of multiple flowtables at the same
time, this may break setups.
12) Missing netlink attribute validation in flowtable deletion.
13) Wrong array index in nf_unregister_net_hook() call from error path
in flowtable addition path.
14) Fix FTP IPVS helper when NAT mangling is in place, patch from
Julian Anastasov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations only unregister nf hooks.
So, they are able to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations are similar to bond_net_ops. Exit method
unregisters all net bridge devices, and it looks like another
pernet_operations are not interested in foreign net bridge list.
So, it's possible to mark them async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a VLAN is added on a port, a reference is taken on the
corresponding master VLAN entry. If it does not already exist, then it
is created and a reference taken.
However, in the second case a reference is not really taken when
CONFIG_REFCOUNT_FULL is enabled as refcount_inc() is replaced by
refcount_inc_not_zero().
Fix this by using refcount_set() on a newly created master VLAN entry.
Fixes: 2512775985 ("net, bridge: convert net_bridge_vlan.refcnt from atomic_t to refcount_t")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the ip_rcv, IPSTATS_MIB_CSUMERRORS is increased when
checksum error is occurred.
bridge netfilter routine should increase IPSTATS_MIB_CSUMERRORS.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We need to make sure the offsets are not out of range of the
total size.
Also check that they are in ascending order.
The WARN_ON triggered by syzkaller (it sets panic_on_warn) is
changed to also bail out, no point in continuing parsing.
Briefly tested with simple ruleset of
-A INPUT --limit 1/s' --log
plus jump to custom chains using 32bit ebtables binary.
Reported-by: <syzbot+845a53d13171abf8bf29@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
All of these conditions are not fatal and should have
been WARN_ONs from the get-go.
Convert them to WARN_ONs and bail out.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ebt_among is special, it has a dynamic match size and is exempt
from the central size checks.
Therefore it must check that the size of the match structure
provided from userspace is sane by making sure em->match_size
is at least the minimum size of the expected structure.
The module has such a check, but its only done after accessing
a structure that might be out of bounds.
tested with: ebtables -A INPUT ... \
--among-dst fe:fe:fe:fe:fe:fe
--among-dst fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fb,fe:fe:fe:fe:fc:fd,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe
--among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fa,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe,fe:fe:fe:fe:fe:fe
Reported-by: <syzbot+fe0b19af568972814355@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains large batch with Netfilter fixes for
your net tree, mostly due to syzbot report fixups and pr_err()
ratelimiting, more specifically, they are:
1) Get rid of superfluous unnecessary check in x_tables before vmalloc(),
we don't hit BUG there anymore, patch from Michal Hock, suggested by
Andrew Morton.
2) Race condition in proc file creation in ipt_CLUSTERIP, from Cong Wang.
3) Drop socket lock that results in circular locking dependency, patch
from Paolo Abeni.
4) Drop packet if case of malformed blob that makes backpointer jump
in x_tables, from Florian Westphal.
5) Fix refcount leak due to race in ipt_CLUSTERIP in
clusterip_config_find_get(), from Cong Wang.
6) Several patches to ratelimit pr_err() for x_tables since this can be
a problem where CAP_NET_ADMIN semantics can protect us in untrusted
namespace, from Florian Westphal.
7) Missing .gitignore update for new autogenerated asn1 state machine
for the SNMP NAT helper, from Zhu Lingshan.
8) Missing timer initialization in xt_LED, from Paolo Abeni.
9) Do not allow negative port range in NAT, also from Paolo.
10) Lock imbalance in the xt_hashlimit rate match mode, patch from
Eric Dumazet.
11) Initialize workqueue before timer in the idletimer match,
from Eric Dumazet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ebt_among still uses pr_err -- these errors indicate ebtables tool bug,
not a usage error.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Now br_sysfs_if file flush doesn't have attr show. To read it will
cause kernel panic after users chmod u+r this file.
Xiong found this issue when running the commands:
ip link add br0 type bridge
ip link add type veth
ip link set veth0 master br0
chmod u+r /sys/devices/virtual/net/veth0/brport/flush
timeout 3 cat /sys/devices/virtual/net/veth0/brport/flush
kernel crashed with NULL a pointer dereference call trace.
This patch is to fix it by return -EINVAL when brport_attr->show
is null, just the same as the check for brport_attr->store in
brport_store().
Fixes: 9cf637473c ("bridge: add sysfs hook to flush forwarding table")
Reported-by: Xiong Zhou <xzhou@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With gcc-4.1.2.:
net/bridge/br_fdb.c: In function ‘br_fdb_sync_static’:
net/bridge/br_fdb.c:996: warning: ‘err’ may be used uninitialized in this function
Indeed, if the list is empty, err will be uninitialized, and will be
propagated up as the function return value.
Fix this by preinitializing err to zero.
Fixes: eb7935830d ("net: bridge: use rhashtable for fdbs")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return statements in functions returning bool should use
true/false instead of 1/0.
This issue was detected with the help of Coccinelle.
Fixes: 85b3526932 ("bridge: Fix build error when IGMP_SNOOPING is not enabled")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several reasons for this:
* Several modules maintain internal version numbers, that they print at
boot/module load time, that are not exposed to userspace, as a
primitive mechanism to make revision number control from the earlier
days of Netfilter.
* IPset shows the protocol version at boot/module load time, instead
display this via module description, as Jozsef suggested.
* Remove copyright notice at boot/module load time in two spots, the
Netfilter codebase is a collective development effort, if we would
have to display copyrights for each contributor at boot/module load
time for each extensions we have, we would probably fill up logs with
lots of useless information - from a technical standpoint.
So let's be consistent and remove them all.
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Remove the infrastructure to register/unregister nft_af_info structure,
this structure stores no useful information anymore.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Now that we have a single table list for each netns, we can get rid of
one pointer per family and the global afinfo list, thus, shrinking
struct netns for nftables that now becomes 64 bytes smaller.
And call __nft_release_afinfo() from __net_exit path accordingly to
release netnamespace objects on removal.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We already validate the hook through bitmask, so this check is
superfluous. When removing this, this patch is also fixing a bug in the
new flowtable codebase, since ctx->afi points to the table family
instead of the netdev family which is where the flowtable is really
hooked in.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This abstraction has no clients anymore, remove it.
This is what remains from previous authors, so correct copyright
statement after recent modifications and code removal.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We cannot make a direct call to nf_ip6_reroute() because that would result
in autoloading the 'ipv6' module because of symbol dependencies.
Therefore, define reroute indirection in nf_ipv6_ops where this really
belongs to.
For IPv4, we can indeed make a direct function call, which is faster,
given IPv4 is built-in in the networking code by default. Still,
CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline
stub for IPv4 in such case.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We cannot make a direct call to nf_ip6_route() because that would result
in autoloading the 'ipv6' module because of symbol dependencies.
Therefore, define route indirection in nf_ipv6_ops where this really
belongs to.
For IPv4, we can indeed make a direct function call, which is faster,
given IPv4 is built-in in the networking code by default. Still,
CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline
stub for IPv4 in such case.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is only used by nf_queue.c and this function comes with no symbol
dependencies with IPv6, it just refers to structure layouts. Therefore,
we can replace it by a direct function call from where it belongs.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We cannot make a direct call to nf_ip6_checksum_partial() because that
would result in autoloading the 'ipv6' module because of symbol
dependencies. Therefore, define checksum_partial indirection in
nf_ipv6_ops where this really belongs to.
For IPv4, we can indeed make a direct function call, which is faster,
given IPv4 is built-in in the networking code by default. Still,
CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline
stub for IPv4 in such case.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We cannot make a direct call to nf_ip6_checksum() because that would
result in autoloading the 'ipv6' module because of symbol dependencies.
Therefore, define checksum indirection in nf_ipv6_ops where this really
belongs to.
For IPv4, we can indeed make a direct function call, which is faster,
given IPv4 is built-in in the networking code by default. Still,
CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline
stub for IPv4 in such case.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
They don't belong to the family definition, move them to the filter
chain type definition instead.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since NFPROTO_INET is handled from the core, we don't need to maintain
extra infrastructure in nf_tables to handle the double hook
registration, one for IPv4 and another for IPv6.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Instead of calling this function from the family specific variant, this
reduces the code size in the fast path for the netdev, bridge and inet
families. After this change, we must call nft_set_pktinfo() upfront from
the chain hook indirection.
Before:
text data bss dec hex filename
2145 208 0 2353 931 net/netfilter/nf_tables_netdev.o
After:
text data bss dec hex filename
2125 208 0 2333 91d net/netfilter/nf_tables_netdev.o
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
no need to define hook points if the family isn't supported.
Because we need these hooks for either nftables, arp/ebtables
or the 'call-iptables' hack we have in the bridge layer add two
new dependencies, NETFILTER_FAMILY_{ARP,BRIDGE}, and have the
users select them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
struct net contains:
struct nf_hook_entries __rcu *hooks[NFPROTO_NUMPROTO][NF_MAX_HOOKS];
which store the hook entry point locations for the various protocol
families and the hooks.
Using array results in compact c code when doing accesses, i.e.
x = rcu_dereference(net->nf.hooks[pf][hook]);
but its also wasting a lot of memory, as most families are
not used.
So split the array into those families that are used, which
are only 5 (instead of 13). In most cases, the 'pf' argument is
constant, i.e. gcc removes switch statement.
struct net before:
/* size: 5184, cachelines: 81, members: 46 */
after:
/* size: 4672, cachelines: 73, members: 46 */
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
