There is an anonymous struct which is actually used as a bitmap. So
convert the struct to a bitmap and change code accordingly where
needed.
This also allows for a cleanup of set_data_bits and set_ctrl_bits as
they can use a common helper now. The helper can also be converted to
a for loop instead of doing bit OR. And given it is a for loop now,
bit masking (using BIT_MSK) is moved from the callers there too.
Signed-off-by: Daniel Chromik <daniel.chromik@seznam.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Acked-by: Willy Tarreau <willy@haproxy.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove parantheses on the right hand side of assignments as they are not
needed. Coccinelle patch used:
@@
expression a, b, c, d;
@@
(
a = (c == d)
|
a =
- (
b
- )
)
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove this comment as it does not have a meaning here.
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change null comparisons of the form x == NULL to !x. This was suggested
by checkpatch.
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kcalloc rather than kzalloc when multiplied by size to prevent
integer overflows. This change also makes code nicer to read.
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unnecessary parantheses around rtsx->pci->dev.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
use dma_mapping_error() instead of comparing the returned address with
zero after dma_map_single().
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The last two lines of these functions are compressed into one.
Also removed the variable ret as it is now not used.
Found using coccinelle:
@@
expression e, ret;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds ADC0831/ADC0832/ADC0834/ADC0838 8-bit ADC driver.
I have tested with ADC0831 and ADC0832. The remaining ADC0834 and
ADC0838 are very similar to ADC0832.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fix comment style warnings in order to comply with Coding Style
standard provided by Documentation/CodingStyle.
This patch solves following issue found with checkpatch:
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Swap implementations of hmc5843_common_suspend and
hmc5843_common_resume functions for they have been
inversed. Device should go on SLEEP mode on suspend
and on CONTINUOUS mode on resume.
Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The AD7193 is mostly register map compatible to the AD7192. The main
difference is that it has 8 instead of 4 inputs, so the way the input
channels are selected is slightly different.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The DMAengine framework gained support for synchronized transfer
termination. Use the new dmaengine_terminate_sync() function instead of
dmaengine_terminate_all(), this avoids a potential race condition when
disabling the buffer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The AD5625/AD5645/AD5665 are a family of 4 channel DACs with 12-bit, 14-bit
and 16-bit precision respectively. The devices come in 3 flavors in terms
of built-in reference, either no built-in reference, built-in 1.25V
reference or built-in 2.5V reference.
The AD5627/AD5647/AD5667 are similar to the AD5625/AD5645/AD5665 except
that they have 2 instead of 4 channels.
While these new devices are mostly register map compatible with the
existing devices support by the driver some offsets and register addresses
have been shuffled around. To accommodate this introduce a new register map
layout. For the lack of a better name we will just call it version 2.
Datasheets:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5625R_5645R_5665R_5625_5665.pdfhttp://www.analog.com/media/en/technical-documentation/data-sheets/AD5627R_5647R_5667R_5627_5667.pdf
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Currently the ad5064 only supports two different register map variations
and this is represented by a bool. This patch changes since to a enum so
we can support more variations in the future.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
List the newly support LTC devices in the Kconfig entry for the AD5064
driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The Linear Technology LTC2606, LTC2607, LTC2609, LTC2616, LTC2617,
LTC2619, LTC2626, LTC2627 and LTC2629 devices are very similar
to the AD5064 device.
This patch adds support for those devices.
Datasheet for LTC devices:
LTC2606, LTC2616, LTC2626: http://www.linear.com/docs/6398
LTC2607, LTC2617, LTC2627: http://www.linear.com/docs/8977
LTC2709, LTC2619, LTC2629: http://www.linear.com/docs/8477
Signed-off-by: Marc Andre <marc.andre@netline.ch>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch makes minor structural changes to support specifics
for LTC2617 DAC. This DAC requires different handling of the
power down modes. The configuration to actually support the
DAC will be submitted in a secondary patch.
Adjust the DECLARE_AD5064_CHANNELS() macro to accept a new
ext_info parameter. This allows to use different power down
modes per DAC. (e.g. DAC only support 90kohm to ground)
Add the chip_info parameter "powerdown_ltc". This parameter is
used in the ad5064_sync_powerdown_mode() function to handle the
power down command for LTC diffently. For those devices the
power down command must be addressed to the channel.
Signed-off-by: Marc Andre <marc.andre@netline.ch>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
mlock *must* be used by core and drivers to protect access
to devices state changes.
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Both the SPI and platform device driver for the ad7606 use the same set of
PM ops. Consolidate them in the common part of the driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Allignment matched to the open parenthesis to avoid the
check detected by the checkpatch.pl.
CHECK: Alignment should match open parenthesis
Signed-off-by: Anjali Menon <cse.anjalimenon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In routine rtl8192_tx_isr(), pointer skb is dereferenced before it is
checked for NULL. This patch has only been compile-tested, as I do not
have the hardware. This problem was reported at
https://bugzilla.kernel.org/show_bug.cgi?id=109951.
Fixes: bugzilla.kernel.org: #109951
Reported-by: Yong Shi <brave_shi@163.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yong Shi <brave_shi@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following checkpatch.pl warning:
WARNING: void function return statements are not generally useful
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The existing kerneldoc blocs had a few issues:
- some of them didn't start with /**
- some used -- instead of - to separate the short description
- some descriptions had text looking like section headers
- some descriptions started with "to" while some used the imperative: use the
imperative everywhere
- some had a "with:" at the end of the shortdesc that didn't make sense once
formatted by kernel-docs
- two argument names where out of sync with the prototype
Signed-off-by: Manuel Pégourié-Gonnard <mpg@elzevir.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using the coma operator for multiple assignments is unnecessary and just looks
weird here.
Signed-off-by: Manuel Pégourié-Gonnard <mpg@elzevir.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pointer is unconditionally dereferenced a few lines later, we need to make
sure it isn't NULL.
Signed-off-by: Manuel Pégourié-Gonnard <mpg@elzevir.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace bit shifting on 1 with the BIT(x) macro
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove extra blank line which is not necessary. Warning detected using
checkpatch.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the checkpatch warning "No space is necessary after cast"
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to gs_fpgaboot.c to convert data types to kernel types
as identified by checkpatch.pl.
Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch for gs_fpgaboot.c that fixes a memory allocation problem
identified by checkpatch.pl.
Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl issue:
CHECK: Please use a blank line after function/struct/union/enum declarations
Signed-off-by: SirnamSwetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calling synchronize_irq() right before free_irq() is quite useless. On one
hand the IRQ can easily fire again before free_irq() is entered, on the
other hand free_irq() itself calls synchronize_irq() internally (in a race
condition free way), before any state associated with the IRQ is freed.
Patch was generated using the following semantic patch:
// <smpl>
@@
expression irq;
@@
-synchronize_irq(irq);
free_irq(irq, ...);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rmi4 touchscreen driver encloses the power-management
functions in #ifdef CONFIG_PM, but the smtcfb_pci_suspend/resume
functions are only really used when CONFIG_PM_SLEEP is also
set, as a frequent gcc warning shows:
ste_rmi4/synaptics_i2c_rmi4.c:1050:12: warning: 'synaptics_rmi4_suspend' defined but not used
ste_rmi4/synaptics_i2c_rmi4.c:1084:12: warning: 'synaptics_rmi4_resume' defined but not used
This changes the driver to remove the #ifdef and instead mark
the functions as __maybe_unused, which is a nicer anyway, as it
provides build testing for all the code in all configurations
and is harder to get wrong.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This synaptics_rmi4_platform_data structure is never modified, so declare
it as const. Others are already const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use to_delayed_work() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes a couple of issues detected by checkpatch with regard to blank lines.
Signed-off-by: Amadeusz Pawlik <potrzebye@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtllib driver is not calling try_module_get() when loading the
encryption modules. Because of this, you can never remove the module
once you have used it one (i.e. bring up the wireless interface).
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the led_classdev_register() with the platform managed version
devm_led_classdev_register() & henceforth remove the redundant
nvec_paz00_remove() function.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a couple of checkpatch warnings about block comments.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
