Commit Graph

4046 Commits

Author SHA1 Message Date
Kailang Yang
0435b3ffba ALSA: hda/realtek - Add eapd shutup to ALC283
Add eapd shutup function to alc283_shutup.
It could avoid pop noise from speaker.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-08 11:27:29 +02:00
Kailang Yang
be8ef16a25 ALSA: hda/realtek - Change model name alias for ChromeOS
Chrome OS was use model name of alc283-dac-wcaps for loading model as default.
Change the model name to same as model name of Chrome OS for future support.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-08 10:38:56 +02:00
Kailang Yang
de9481cb40 ALSA: hda/realtek - Improve HP depop when system change power state on Chromebook
It is better to change Mic2-Vref to manual mode.
Manual control Mic2-Vref will solve pop noise issue.
It will improve pop noise for power on, power off, S3 and resume.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-07 12:32:52 +02:00
Takashi Iwai
415d555e6b ALSA: hda - Fix silent speaker output due to mute LED fixup
The recent fixups for HP laptops to support the mute LED made the
speaker output silent on some machines.  It turned out that they use
the NID 0x18 for the speaker while it's also used for controlling the
LED via VREF bits although the current driver code blindly assumes
that such a node is a mic pin (where 0x18 is usually so).

This patch fixes the problem by only changing the VREF bits and
keeping the other pin ctl bits.

Reported-and-tested-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-03 11:51:21 +02:00
Kailang Yang
8314f22589 ALSA: hda/realtek - Fixed single output machine get empty hp sense
If it only has single output of HP out of machine.
The driver parser will copy hp_pins to line_out_pins.
hp_pins will empty for alc283_init and alc283_shutup functions.
This will cause not have value for hp_pin_sense.
Add check line_out_type code will solve it .

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-03 11:48:33 +02:00
W. Trevor King
a4b7f21d7b ALSA: hda - Enable beep for ASUS 1015E
The `lspci -nnvv` output contains (wrapped for line length):

  00:1b.0 Audio device [0403]:
    Intel Corporation 7 Series/C210 Series Chipset Family
    High Definition Audio Controller [8086:1e20] (rev 04)
        Subsystem: ASUSTeK Computer Inc. Device [1043:115d]

Signed-off-by: W. Trevor King <wking@tremily.us>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-31 10:47:22 +02:00
Hui Wang
a870593bab ALSA: hda - add headset mic detect quirks for three Dell laptops
When we plug a 3-ring headset on the Dell machines (VID: 0x10ec0255,
SID: 0x10280632; VID: 0x10ec0293, SID: 0x1028062c; VID: 0x10ec0293,
SID: 0x1028062e), the headset mic can't be detected, after apply this
patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1297581
Cc: David Henningsson <david.henningsson@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-26 08:03:52 +01:00
Takashi Iwai
9b7564a649 ALSA: hda - Inform the unexpectedly ignored pins by auto-parser
The auto-parser may ignore some pins that could be valid when they
don't match with the assumption or if there are way too many pins
assigned to the same output type.  So far, such a pin has been
silently ignored, but it's better to leave a message, which would help
for debugging and understanding the problem.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-25 10:02:01 +01:00
Mengdong Lin
2df6742f61 ALSA: hda - verify pin:cvt connection on preparing a stream for Intel HDMI codec
This is a temporary fix for some Intel HDMI codecs to avoid no sound output for
a resuming playback after S3.

After S3, the audio driver restores pin:cvt connection selections by
snd_hda_codec_resume_cache(). However this can happen before the gfx side is
ready and such connect selection is overlooked by HW. After gfx is ready, the
pins make the default selection again. And this will cause multiple pins share
a same convertor and mute control will affect each other. Thus a resumed audio
playback become silent after S3.

This patch verifies pin:cvt connection on preparing a stream, to assure the pin
selects the right convetor and an assigned convertor is not shared by other
unused pins. Apply this fix-up on Haswell, Broadwell and Valleyview (Baytrail).

We need this temporary fix before a reliable software communication channel is
established between audio and gfx, to sync audio/gfx operations.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-20 07:36:17 +01:00
Takashi Iwai
67b2fb48cb Merge branch 'topic/alc28x' into for-next 2014-03-18 09:56:07 +01:00
Kailang Yang
cb149cb3a7 ALSA: hda/realtek - Restore default value for ALC282
Restore the registers to prevent the abnormal digital power supply
rising ratio/sequence to the codec and causing the incorrect default
codec register restoration during initialization.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-18 09:55:54 +01:00
Takashi Iwai
376f94c339 Merge branch 'topic/alc28x' into for-next 2014-03-18 09:51:06 +01:00
Kailang Yang
7b5c7a0240 ALSA: hda/realtek - Fix the noise after suspend and resume on ALC282 codec
When the power state of ALC283 codec goes to D3 or return back to D0,
it gives a noise via headphone output. To follow the depop procedure,
it will be better.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-18 09:49:27 +01:00
Kailang Yang
6bd55b04fe ALSA: hda/realtek - Restore default value for ALC283
Restore the registers to prevent the abnormal digital power supply
rising ratio/sequence to the codec and causing the incorrect default
codec register restoration during initialization.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=71861
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-18 07:14:42 +01:00
Takashi Iwai
5fdb83f190 ASoC: Updates for v3.15
Quite a busy release for ASoC this time, more on janitorial work than
 exciting new features but welcome nontheless:
 
  - Lots of cleanups from Takashi for enumerations; the original API for
    these was error prone so he's refactored lots of code to use more
    modern APIs which avoid issues.
  - Elimination of the ASoC level wrappers for I2C and SPI moving us
    closer to converting to regmap completely and avoiding some
    randconfig hassle.
  - Provide both manually and transparently locked DAPM APIs rather than
    a mix of the two fixing some concurrency issues.
  - Start converting CODEC drivers to use separate bus interface drivers
    rather than having them all in one file helping avoid dependency
    issues.
  - DPCM support for Intel Haswell and Bay Trail platforms.
  - Lots of work on improvements for simple-card, DaVinci and the Renesas
    rcar drivers.
  - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
    CSR SiRF SoC.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTIOhJAAoJELSic+t+oim90CoP/3CVTm9cWv1qhPSU6jjn6RJG
 /djmhntJfHd/GXo+0TiiwNK9WmZjFrJUr+5ofkDTCqSzFz1Suc90B6oHxY4dFbgF
 IyIpTexGwTLv3H6yDjadYAfmGDSsE9sM2dkID9oXy6aEzjNby/a1VEiBnRgx16X1
 YGvMVK8AGFn/AyC/zOV6EcKJxUjdDogqZ5wkR2XHzwDoYjl9ufxK9BnSIygYABOW
 ABAjyrZf3xx97AH82BB6iqcZMh5GxGNTvI3hQd/vjx0r7RFUDNLqmF2cPZAMTRW/
 bXWxVmtNHie1+lCldyMFm8pV/Pv09zuqDAQKbPY2TeHj2zF8CM548NlkFHqwHlp0
 S9K5E1N+/2wcXMjQa1wBELohUdl6dVh1OFOAz7M8o0TJdSOZyR6PJ9r0NprP8NgS
 67FBU+ZqnWIK159m9rKkFfPhnaDuDzk+rpwyK0fQxQgpdGGjLyv7OK3GhS30oTnA
 Z2GjEyUySM1BcEEWAtfUD5fHbjN28e1Icn53q5q4JK4gvx4DXBy08uY/vumvjXjO
 8oum3q3RjRvqIhzMrJoVgs+c8RHwS/bZQhlu9Q3qNTsDNDyMnaZWHFAnP8RDqHjv
 ojZiMJkJdpqceZ3z1k5ZG8GWJ2JaZBikSbeNk2Ltg17/0nackq2r8ekrIoEUPVk2
 ph4DJNC2s1qCFtx7tzQj
 =C5oo
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.15

Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:

 - Lots of cleanups from Takashi for enumerations; the original API for
   these was error prone so he's refactored lots of code to use more
   modern APIs which avoid issues.
 - Elimination of the ASoC level wrappers for I2C and SPI moving us
   closer to converting to regmap completely and avoiding some
   randconfig hassle.
 - Provide both manually and transparently locked DAPM APIs rather than
   a mix of the two fixing some concurrency issues.
 - Start converting CODEC drivers to use separate bus interface drivers
   rather than having them all in one file helping avoid dependency
   issues.
 - DPCM support for Intel Haswell and Bay Trail platforms.
 - Lots of work on improvements for simple-card, DaVinci and the Renesas
   rcar drivers.
 - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
   CSR SiRF SoC.
2014-03-13 09:53:25 +01:00
Mengdong Lin
caaf5ef949 ALSA: hda - initialize audio InfoFrame to be all zero
This patch initialized the local audio InfoFrame variable 'ai' to be all zero,
thus the data bytes will indicate "Refer to Stream Header" by default.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-11 09:15:39 +01:00
Takashi Iwai
9b745ab897 ALSA: hda - Fix loud click noise with IdeaPad 410Y
Lenovo IdeaPad 410Y with ALC282 codec makes loud click noises at boot
and shutdown.  Also, it wrongly misdetects the acpi_thinkpad hook.
This patch adds a device-specific fixup for disabling the shutup
callback that is the cause of the click noise and also avoiding the
thinpad_helper calls.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=71511
Reported-and-tested-by: Guilherme Amadio <guilherme.amadio@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-07 08:37:19 +01:00
Takashi Iwai
f3e9b59cb9 ALSA: hda - Use analog beep for Thinkpads with AD1984 codecs
For making the driver behavior compatible with the earlier kernels,
use the analog beep in the loopback path instead of the digital beep.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-05 12:00:29 +01:00
Takashi Iwai
c5eda4c1bf ALSA: hda - Add missing loopback merge path for AD1884/1984 codecs
The mixer widget (NID 0x20) of AD1884 and AD1984 codecs isn't
connected directly to the actual I/O paths but only via another mixer
widget (NID 0x21).  We need a similar fix as we did for AD1882.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-05 11:52:24 +01:00
Hui Wang
3b44675226 ALSA: hda - add automute fix for another dell AIO model
When plugging a headphone or headset, lots of noise is heard from
internal speaker, after changing the automute via amp instead of
pinctl, the noise disappears.

BugLink: https://bugs.launchpad.net/bugs/1268468
Cc: David Henningsson <david.henningsson@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-04 10:25:25 +01:00
Kailang Yang
31278997ad ALSA: hda/realtek - Add headset quirk for Dell DT
This quirk is needed for the headset microphone to work.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03 10:48:55 +01:00
Marius Knaust
a6b92b6650 ALSA: hda - Added inverted digital-mic handling for Acer TravelMate 8371
Signed-off-by: Marius Knaust <marius.knaust@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03 09:55:43 +01:00
Dylan Reid
db291e36a4 ALSA: hda - Mark reg op args as iomem
The ops to read and write registers should take pointers labeled as
__iomem.  Thanks to the sparse bot for catching this.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03 09:53:28 +01:00
Dylan Reid
778bde6f59 ALSA: hda - Rename reg access ops in hda_controller_ops
Using readl, writel, etc. resulted in some architectures, such as
s390, expanding the member names into zpci_writel.  Obviously not the
intended result.

Fixes s390 build breakage introduced by "4083081 - ALSA: hda - Allow
different ops to read/write registers"

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03 09:53:21 +01:00
Dylan Reid
7c3e438add ALSA: hda - Make azx_attach_pcm_stream static
It is only used in hda_controller.c now.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03 09:53:14 +01:00
Dylan Reid
78e34f34ac ALSA: hda - remove PCI dependency in Kconfig
Remove the dependency on CONFIG_PCI for building hda codec drivers so
that platforms with HDA attach via means other than PCI can use them.
This was as suggested by tiwai.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:23:55 +01:00
Dylan Reid
154867cf4e ALSA: hda - Move codec create to hda_controller
Codec creation and stream initialization can be shared between
hda_intel and hda platform drivers.  Move it and the static functions
it depends on to hda_controller.c.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:23:33 +01:00
Dylan Reid
f0b1df8871 ALSA: hda - Move azx_interrupt to hda_controller
This code will be reused by an hda_platform driver as it has no PCI
dependencies.  This allows update_rirb to be static as all users are
now in hda_controller.c.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:23:24 +01:00
Dylan Reid
7ca954a86b ALSA: hda - Add position_check op
This op will be used by hda_intel to do the position check.  Takashi
wisely suggested adding this before moving the interrupt handler to
common HDA code.  Having this callback prevents the need to move the
hda_intel specific delayed interrupt handling with the irq.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:23:16 +01:00
Dylan Reid
f43923ff2c ALSA: hda - Move low level functions to hda_controller
Share more code from hda_intel.  This moves the link control and
initialization to hda_controller.  The code will also be used by an
hda platform driver.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:23:06 +01:00
Dylan Reid
f19c3ec21b ALSA: hda - move alloc_cmd_io to hda_controller
Combining the call to alloc_cmd_io with the allocate pages function
removes an extra interface between hda_intel and hda_controller.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:22:58 +01:00
Dylan Reid
6e85dddc1c ALSA: hda - Relocate RIRB/CORB interface to hda_controller
This is done to allow an HDA platform driver to reuse the code.

A few of the interfaces added to hda_controller will disappear in
following commits as their users are also moved to hda_controller.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:22:46 +01:00
Dylan Reid
2b5fd6c2e9 ALSA: hda - Move the dsp loader to hda_controller
Moving the DSP loading functionality to hda_controller.c means that
the dsp lock doesn't need to be shared in hda_intel and
hda_controller.  The forthcoming platform driver doesn't need the DSP
loading code, but sharing it doesn't hurt.

Tested on Chromebook Pixel's ca0132 that uses the DSP loader.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:22:38 +01:00
Dylan Reid
6790899443 ALSA: hda - Pull pages allocation to hda_controller
Pull allocation from first_init to a new function in hda_controller.c.
Short term this will allow the dsp loader to be moved as well.  In
later commits it will allow the same allocation to be used by the
platform hda driver.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:22:30 +01:00
Dylan Reid
05e848788e ALSA: hda - Add hda_controller.c and move pcm ops from hda_intel
Pull the pcm_ops and the functions they use into a new hda_controller
file.  This is done to allow for other hda implementations besides PCI
to use the same ops.  The hda_controller file will house functionality
related to HDA but independent of the bus used to talk to the
controller.

This currently shares dsp locking across the two files.  This will be
remedied in a following commit.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:22:17 +01:00
Dylan Reid
8769b27861 ALSA: hda - Add pcm_mmap_prepare op.
Adding this op allows the X86 specific mmap operation to help in
hda_intel without needing a CONFIG_X86 in future non-PCI hda drivers.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:22:02 +01:00
Dylan Reid
b419b35be4 ALSA: hda - Move snd page allocation to ops
Break out the allocation of pages for DMA and PCM buffers to ops in
the chip structure.  This is done to allow for architecture specific
work-arounds to be added.  Currently mark_pages_wc is used by
hda_intel.  This avoids needing to move that x86-specific code to a
common area shared with hda platform drivers.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:21:51 +01:00
Dylan Reid
e62a42aebd ALSA: hda - Pass max_slots and power_save to codec_create
Passing the max slots and power save arguments to codec_create will
allow for its reuse by an hda_platform driver. It makes the function
independent of the module params in hda_intel and ready to move to
hda_shared in a following commit.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:21:43 +01:00
Dylan Reid
749ee287fc ALSA: hda - Add jackpoll_ms to struct azx
Keeping a pointer to the jackpoll_ms array in the chip will allow
azx_codec_create to be shared between hda_intel and hda_platform
drivers.  Also modify get_jackpoll_ms to make the jackpoll_ms member
optional, this way a platform driver can leave it out if it's not
needed.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:21:29 +01:00
Dylan Reid
f563bf65d9 ALSA: hda - remove unused clear of STATESTS
Although the code was updated last year the "#if 0" surrounding it
dates back to the original git commit.  The function will be moved to
a new file, no need to carry the dead code.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:21:19 +01:00
Dylan Reid
f46ea609d1 ALSA: hda - Add function pointer for disabling MSI
This is a PCI-only feature, but adding a callback for it in the chip
structure breaks the PCI dependency in the RIRB code allowing the
logic there to be re-used by the platform HDA driver.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:21:13 +01:00
Dylan Reid
8928756dbd ALSA: hda - Use device pointer from the card instead of pci
This removes calls to get the device via PCI from other parts of the
code that will be able to be re-used by the platform driver.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:21:04 +01:00
Dylan Reid
9cdc0115e4 ALSA: hda - Keep pointer to bdl_pos_fix in chip struct
This will allow for a platform hda driver to use it as well.  It
removes the dependency on the module param from hda_intel, which will
allow for azx_setup_periods to be shared.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:20:51 +01:00
Dylan Reid
4083081333 ALSA: hda - Allow different ops to read/write registers
The forthcoming platform hda driver needs to override the way
registers are read and written.  In preparation for that, introduce a
reg_ops struct that can be implemented differently by the new driver.
Change the existing macros to use the new structure, and move them to
hda_priv.h where they will be accessible to both PCI and platform
drivers.

Start with register access, but later commits will add more ops that
differ between PCI and platform.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:20:37 +01:00
Dylan Reid
2538a4f583 ALSA: hda - Move some definitions to new hda_priv.h
Later commits adding support for hda platform drivers will want to use
the same defines and structures. Put them in a place reachable by both
hda_intel and the new platform driver.

This is a mostly a direct copy with a few whitespace and comment
changes to make checkpatch happy.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01 11:20:19 +01:00
David Henningsson
ca460f8652 ALSA: hda - Fix CORB reset to follow specification
According to the HDA spec, we must write 1 to bit 15 on a CORBRP
reset, read back 1, then write 0, then read back 0. This must be
done while the DMA is not running.

We accidentaly ended up writing back the 0 by using a writel
instead of a writew to CORBWP.

This caused occasional controller failure on Bay Trail hardware.

[replaced error messages with dev_err() by tiwai]

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-28 14:03:30 +01:00
Takashi Iwai
d604b39908 ALSA: hda - Fix registration of beep input device
The beep input device is registered via input_register_device(), but
this is called in snd_hda_attach_beep_device() where the sound devices
aren't registered yet.  This leads to the binding to non-existing
object, thus results in failure.  And, even if the binding worked
(against the PCI object), it's still racy; the input device appears
before the sound objects.

For fixing this, register the input device properly at dev_register
ops of the codec object it's bound with.  Also, call
snd_hda_detach_beep_device() at dev_disconnection so that it's
detached at the right timing.  As a bonus, since it's called in the
codec's ops, we can get rid of the further call from the other codec
drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-28 14:02:21 +01:00
Takashi Iwai
e8b99a1dcb ALSA: hda/sigmatel - Allow auto-switching for dock line-in of HP laptops
Many HP laptops with STAC codecs have a docking station port and BIOS
sets the pins for the input on the dock as a line in.  Because the
generic parser doesn't handle a line in pin as auto-switchable, this
resulted in the manual capture source selection on these laptops.

However, from the usability POV, the automatic switching is easier.
This patch adds the line_in_auto_switch hint in the fixup function for
these laptops.  Even if no dock port is present, this should be
harmless as the generic parser allows the auto-switching only in a
limited situation (all three pins are located in different
positions).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-27 16:24:53 +01:00
Takashi Iwai
f2606a8079 ALSA: hda - Make codec object as a parent for input beep devices
Instead of the controller, the new codec object is assigned as a
parent for the hd-audio beep input devices, just like already done for
PCM and hwdep.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-27 09:33:00 +01:00
Kailang Yang
fce0a0c726 ALSA: hda/realtek - Add more entry for enable HP mute led
I lost this SSID. Add it into the fixup table.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 10:05:56 +01:00