Certain runtime conditions require APICv to be temporary deactivated
during runtime. The current implementation only support run-time
deactivation of APICv when Hyper-V SynIC is enabled, which is not
temporary.
In addition, for AMD, when APICv is (de)activated at runtime,
all vcpus in the VM have to operate in the same mode. Thus the
requesting vcpu must notify the others.
So, introduce the following:
* A new KVM_REQ_APICV_UPDATE request bit
* Interfaces to request all vcpus to update APICv status
* A new interface to update APICV-related parameters for each vcpu
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are several reasons in which a VM needs to deactivate APICv
e.g. disable APICv via parameter during module loading, or when
enable Hyper-V SynIC support. Additional inhibit reasons will be
introduced later on when dynamic APICv is supported,
Introduce KVM APICv inhibit reason bits along with a new variable,
apicv_inhibit_reasons, to help keep track of APICv state for each VM,
Initially, the APICV_INHIBIT_REASON_DISABLE bit is used to indicate
the case where APICv is disabled during KVM module load.
(e.g. insmod kvm_amd avic=0 or insmod kvm_intel enable_apicv=0).
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[Do not use get_enable_apicv; consider irqchip_split in svm.c. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Re-factor code into a helper function for setting lapic parameters when
activate/deactivate APICv, and export the function for subsequent usage.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Harini Katakam says:
====================
macb: TSO bug fixes
An IP errata was recently discovered when testing TSO enabled versions
with perf test tools where a false amba error is reported by the IP.
Some ways to reproduce would be to use iperf or applications with payload
descriptor sizes very close to 16K. Once the error is observed TXERR (or
bit 6 of ISR) will be constantly triggered leading to a series of tx path
error handling and clean up. Workaround the same by limiting this size to
0x3FC0 as recommended by Cadence. There was no performance impact on 1G
system that I tested with.
Note on patch 1: The alignment code may be unused but leaving it there
in case anyone is using UFO.
Added Fixes tag to patch 1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
GEM_MAX_TX_LEN currently resolves to 0x3FF8 for any IP version supporting
TSO with full 14bits of length field in payload descriptor. But an IP
errata causes false amba_error (bit 6 of ISR) when length in payload
descriptors is specified above 16387. The error occurs because the DMA
falsely concludes that there is not enough space in SRAM for incoming
payload. These errors were observed continuously under stress of large
packets using iperf on a version where SRAM was 16K for each queue. This
errata will be documented shortly and affects all versions since TSO
functionality was added. Hence limit the max length to 0x3FC0 (rounded).
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IP TSO implementation does NOT require the length to be a
multiple of 8. That is only a requirement for UFO as per IP
documentation. Hence, exit macb_features_check function in the
beginning if the protocol is not UDP. Only when it is UDP,
proceed further to the alignment checks. Update comments to
reflect the same. Also remove dead code checking for protocol
TCP when calculating header length.
Fixes: 1629dd4f76 ("cadence: Add LSO support.")
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot managed to send an IPX packet through bond_alb_xmit()
and af_packet and triggered a use-after-free.
First, bond_alb_xmit() was using ipx_hdr() helper to reach
the IPX header, but ipx_hdr() was using the transport offset
instead of the network offset. In the particular syzbot
report transport offset was 0xFFFF
This patch removes ipx_hdr() since it was only (mis)used from bonding.
Then we need to make sure IPv4/IPv6/IPX headers are pulled
in skb->head before dereferencing anything.
BUG: KASAN: use-after-free in bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
Read of size 2 at addr ffff8801ce56dfff by task syz-executor.2/18108
(if (ipx_hdr(skb)->ipx_checksum != IPX_NO_CHECKSUM) ...)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
[<ffffffff8441fc42>] __dump_stack lib/dump_stack.c:17 [inline]
[<ffffffff8441fc42>] dump_stack+0x14d/0x20b lib/dump_stack.c:53
[<ffffffff81a7dec4>] print_address_description+0x6f/0x20b mm/kasan/report.c:282
[<ffffffff81a7e0ec>] kasan_report_error mm/kasan/report.c:380 [inline]
[<ffffffff81a7e0ec>] kasan_report mm/kasan/report.c:438 [inline]
[<ffffffff81a7e0ec>] kasan_report.cold+0x8c/0x2a0 mm/kasan/report.c:422
[<ffffffff81a7dc4f>] __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:469
[<ffffffff82c8c00a>] bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
[<ffffffff82c60c74>] __bond_start_xmit drivers/net/bonding/bond_main.c:4199 [inline]
[<ffffffff82c60c74>] bond_start_xmit+0x4f4/0x1570 drivers/net/bonding/bond_main.c:4224
[<ffffffff83baa558>] __netdev_start_xmit include/linux/netdevice.h:4525 [inline]
[<ffffffff83baa558>] netdev_start_xmit include/linux/netdevice.h:4539 [inline]
[<ffffffff83baa558>] xmit_one net/core/dev.c:3611 [inline]
[<ffffffff83baa558>] dev_hard_start_xmit+0x168/0x910 net/core/dev.c:3627
[<ffffffff83bacf35>] __dev_queue_xmit+0x1f55/0x33b0 net/core/dev.c:4238
[<ffffffff83bae3a8>] dev_queue_xmit+0x18/0x20 net/core/dev.c:4278
[<ffffffff84339189>] packet_snd net/packet/af_packet.c:3226 [inline]
[<ffffffff84339189>] packet_sendmsg+0x4919/0x70b0 net/packet/af_packet.c:3252
[<ffffffff83b1ac0c>] sock_sendmsg_nosec net/socket.c:673 [inline]
[<ffffffff83b1ac0c>] sock_sendmsg+0x12c/0x160 net/socket.c:684
[<ffffffff83b1f5a2>] __sys_sendto+0x262/0x380 net/socket.c:1996
[<ffffffff83b1f700>] SYSC_sendto net/socket.c:2008 [inline]
[<ffffffff83b1f700>] SyS_sendto+0x40/0x60 net/socket.c:2004
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit fdd41ec21e ("devlink: Return right error code in case of errors
for region read") modified the region read code to report errors
properly in unexpected cases.
In the case where the start_offset and ret_offset match, it unilaterally
converted this into an error. This causes an issue for the "dump"
version of the command. In this case, the devlink region dump will
always report an invalid argument:
000000000000ffd0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
000000000000ffe0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
devlink answers: Invalid argument
000000000000fff0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
This occurs because the expected flow for the dump is to return 0 after
there is no further data.
The simplest fix would be to stop converting the error code to -EINVAL
if start_offset == ret_offset. However, avoid unnecessary work by
checking for when start_offset is larger than the region size and
returning 0 upfront.
Fixes: fdd41ec21e ("devlink: Return right error code in case of errors for region read")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The receive frame length calculation uses a wrong mask to calculate the
length of the received frames.
Per spec table 4-1 the length is contained in the FL (Frame Length)
field in bits 30:16.
This didn't show up as an issue so far since frames were limited to
1500 bytes which falls within the 11 bit window.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld says:
====================
wireguard fixes for 5.6-rc1
Here are fixes for WireGuard before 5.6-rc1 is tagged. It includes:
1) A fix for a UaF (caused by kmalloc failing during a very small
allocation) that syzkaller found, from Eric Dumazet.
2) A fix for a deadlock that syzkaller found, along with an additional
selftest to ensure that the bug fix remains correct, from me.
3) Two little fixes/cleanups to the selftests from Krzysztof Kozlowski
and me.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Without this, we wind up proceeding too early sometimes when the
previous process has just used the same listening port. So, we tie the
listening socket query to the specific pid we're interested in.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CONFIG_ENABLE_WARN_DEPRECATED is gone since commit 771c035372
("deprecate the '__deprecated' attribute warnings entirely and for
good").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure that peers with low order points are ignored, both in the case
where we already have a device private key and in the case where we do
not. This adds points that naturally give a zero output.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our static-static calculation returns a failure if the public key is of
low order. We check for this when peers are added, and don't allow them
to be added if they're low order, except in the case where we haven't
yet been given a private key. In that case, we would defer the removal
of the peer until we're given a private key, since at that point we're
doing new static-static calculations which incur failures we can act on.
This meant, however, that we wound up removing peers rather late in the
configuration flow.
Syzkaller points out that peer_remove calls flush_workqueue, which in
turn might then wait for sending a handshake initiation to complete.
Since handshake initiation needs the static identity lock, holding the
static identity lock while calling peer_remove can result in a rare
deadlock. We have precisely this case in this situation of late-stage
peer removal based on an invalid public key. We can't drop the lock when
removing, because then incoming handshakes might interact with a bogus
static-static calculation.
While the band-aid patch for this would involve breaking up the peer
removal into two steps like wg_peer_remove_all does, in order to solve
the locking issue, there's actually a much more elegant way of fixing
this:
If the static-static calculation succeeds with one private key, it
*must* succeed with all others, because all 32-byte strings map to valid
private keys, thanks to clamping. That means we can get rid of this
silly dance and locking headaches of removing peers late in the
configuration flow, and instead just reject them early on, regardless of
whether the device has yet been assigned a private key. For the case
where the device doesn't yet have a private key, we safely use zeros
just for the purposes of checking for low order points by way of
checking the output of the calculation.
The following PoC will trigger the deadlock:
ip link add wg0 type wireguard
ip addr add 10.0.0.1/24 dev wg0
ip link set wg0 up
ping -f 10.0.0.2 &
while true; do
wg set wg0 private-key /dev/null peer AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= allowed-ips 10.0.0.0/24 endpoint 10.0.0.3:1234
wg set wg0 private-key <(echo AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=)
done
[ 0.949105] ======================================================
[ 0.949550] WARNING: possible circular locking dependency detected
[ 0.950143] 5.5.0-debug+ #18 Not tainted
[ 0.950431] ------------------------------------------------------
[ 0.950959] wg/89 is trying to acquire lock:
[ 0.951252] ffff8880333e2128 ((wq_completion)wg-kex-wg0){+.+.}, at: flush_workqueue+0xe3/0x12f0
[ 0.951865]
[ 0.951865] but task is already holding lock:
[ 0.952280] ffff888032819bc0 (&wg->static_identity.lock){++++}, at: wg_set_device+0x95d/0xcc0
[ 0.953011]
[ 0.953011] which lock already depends on the new lock.
[ 0.953011]
[ 0.953651]
[ 0.953651] the existing dependency chain (in reverse order) is:
[ 0.954292]
[ 0.954292] -> #2 (&wg->static_identity.lock){++++}:
[ 0.954804] lock_acquire+0x127/0x350
[ 0.955133] down_read+0x83/0x410
[ 0.955428] wg_noise_handshake_create_initiation+0x97/0x700
[ 0.955885] wg_packet_send_handshake_initiation+0x13a/0x280
[ 0.956401] wg_packet_handshake_send_worker+0x10/0x20
[ 0.956841] process_one_work+0x806/0x1500
[ 0.957167] worker_thread+0x8c/0xcb0
[ 0.957549] kthread+0x2ee/0x3b0
[ 0.957792] ret_from_fork+0x24/0x30
[ 0.958234]
[ 0.958234] -> #1 ((work_completion)(&peer->transmit_handshake_work)){+.+.}:
[ 0.958808] lock_acquire+0x127/0x350
[ 0.959075] process_one_work+0x7ab/0x1500
[ 0.959369] worker_thread+0x8c/0xcb0
[ 0.959639] kthread+0x2ee/0x3b0
[ 0.959896] ret_from_fork+0x24/0x30
[ 0.960346]
[ 0.960346] -> #0 ((wq_completion)wg-kex-wg0){+.+.}:
[ 0.960945] check_prev_add+0x167/0x1e20
[ 0.961351] __lock_acquire+0x2012/0x3170
[ 0.961725] lock_acquire+0x127/0x350
[ 0.961990] flush_workqueue+0x106/0x12f0
[ 0.962280] peer_remove_after_dead+0x160/0x220
[ 0.962600] wg_set_device+0xa24/0xcc0
[ 0.962994] genl_rcv_msg+0x52f/0xe90
[ 0.963298] netlink_rcv_skb+0x111/0x320
[ 0.963618] genl_rcv+0x1f/0x30
[ 0.963853] netlink_unicast+0x3f6/0x610
[ 0.964245] netlink_sendmsg+0x700/0xb80
[ 0.964586] __sys_sendto+0x1dd/0x2c0
[ 0.964854] __x64_sys_sendto+0xd8/0x1b0
[ 0.965141] do_syscall_64+0x90/0xd9a
[ 0.965408] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 0.965769]
[ 0.965769] other info that might help us debug this:
[ 0.965769]
[ 0.966337] Chain exists of:
[ 0.966337] (wq_completion)wg-kex-wg0 --> (work_completion)(&peer->transmit_handshake_work) --> &wg->static_identity.lock
[ 0.966337]
[ 0.967417] Possible unsafe locking scenario:
[ 0.967417]
[ 0.967836] CPU0 CPU1
[ 0.968155] ---- ----
[ 0.968497] lock(&wg->static_identity.lock);
[ 0.968779] lock((work_completion)(&peer->transmit_handshake_work));
[ 0.969345] lock(&wg->static_identity.lock);
[ 0.969809] lock((wq_completion)wg-kex-wg0);
[ 0.970146]
[ 0.970146] *** DEADLOCK ***
[ 0.970146]
[ 0.970531] 5 locks held by wg/89:
[ 0.970908] #0: ffffffff827433c8 (cb_lock){++++}, at: genl_rcv+0x10/0x30
[ 0.971400] #1: ffffffff82743480 (genl_mutex){+.+.}, at: genl_rcv_msg+0x642/0xe90
[ 0.971924] #2: ffffffff827160c0 (rtnl_mutex){+.+.}, at: wg_set_device+0x9f/0xcc0
[ 0.972488] #3: ffff888032819de0 (&wg->device_update_lock){+.+.}, at: wg_set_device+0xb0/0xcc0
[ 0.973095] #4: ffff888032819bc0 (&wg->static_identity.lock){++++}, at: wg_set_device+0x95d/0xcc0
[ 0.973653]
[ 0.973653] stack backtrace:
[ 0.973932] CPU: 1 PID: 89 Comm: wg Not tainted 5.5.0-debug+ #18
[ 0.974476] Call Trace:
[ 0.974638] dump_stack+0x97/0xe0
[ 0.974869] check_noncircular+0x312/0x3e0
[ 0.975132] ? print_circular_bug+0x1f0/0x1f0
[ 0.975410] ? __kernel_text_address+0x9/0x30
[ 0.975727] ? unwind_get_return_address+0x51/0x90
[ 0.976024] check_prev_add+0x167/0x1e20
[ 0.976367] ? graph_lock+0x70/0x160
[ 0.976682] __lock_acquire+0x2012/0x3170
[ 0.976998] ? register_lock_class+0x1140/0x1140
[ 0.977323] lock_acquire+0x127/0x350
[ 0.977627] ? flush_workqueue+0xe3/0x12f0
[ 0.977890] flush_workqueue+0x106/0x12f0
[ 0.978147] ? flush_workqueue+0xe3/0x12f0
[ 0.978410] ? find_held_lock+0x2c/0x110
[ 0.978662] ? lock_downgrade+0x6e0/0x6e0
[ 0.978919] ? queue_rcu_work+0x60/0x60
[ 0.979166] ? netif_napi_del+0x151/0x3b0
[ 0.979501] ? peer_remove_after_dead+0x160/0x220
[ 0.979871] peer_remove_after_dead+0x160/0x220
[ 0.980232] wg_set_device+0xa24/0xcc0
[ 0.980516] ? deref_stack_reg+0x8e/0xc0
[ 0.980801] ? set_peer+0xe10/0xe10
[ 0.981040] ? __ww_mutex_check_waiters+0x150/0x150
[ 0.981430] ? __nla_validate_parse+0x163/0x270
[ 0.981719] ? genl_family_rcv_msg_attrs_parse+0x13f/0x310
[ 0.982078] genl_rcv_msg+0x52f/0xe90
[ 0.982348] ? genl_family_rcv_msg_attrs_parse+0x310/0x310
[ 0.982690] ? register_lock_class+0x1140/0x1140
[ 0.983049] netlink_rcv_skb+0x111/0x320
[ 0.983298] ? genl_family_rcv_msg_attrs_parse+0x310/0x310
[ 0.983645] ? netlink_ack+0x880/0x880
[ 0.983888] genl_rcv+0x1f/0x30
[ 0.984168] netlink_unicast+0x3f6/0x610
[ 0.984443] ? netlink_detachskb+0x60/0x60
[ 0.984729] ? find_held_lock+0x2c/0x110
[ 0.984976] netlink_sendmsg+0x700/0xb80
[ 0.985220] ? netlink_broadcast_filtered+0xa60/0xa60
[ 0.985533] __sys_sendto+0x1dd/0x2c0
[ 0.985763] ? __x64_sys_getpeername+0xb0/0xb0
[ 0.986039] ? sockfd_lookup_light+0x17/0x160
[ 0.986397] ? __sys_recvmsg+0x8c/0xf0
[ 0.986711] ? __sys_recvmsg_sock+0xd0/0xd0
[ 0.987018] __x64_sys_sendto+0xd8/0x1b0
[ 0.987283] ? lockdep_hardirqs_on+0x39b/0x5a0
[ 0.987666] do_syscall_64+0x90/0xd9a
[ 0.987903] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 0.988223] RIP: 0033:0x7fe77c12003e
[ 0.988508] Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 4
[ 0.989666] RSP: 002b:00007fffada2ed58 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 0.990137] RAX: ffffffffffffffda RBX: 00007fe77c159d48 RCX: 00007fe77c12003e
[ 0.990583] RDX: 0000000000000040 RSI: 000055fd1d38e020 RDI: 0000000000000004
[ 0.991091] RBP: 000055fd1d38e020 R08: 000055fd1cb63358 R09: 000000000000000c
[ 0.991568] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000002c
[ 0.992014] R13: 0000000000000004 R14: 000055fd1d38e020 R15: 0000000000000001
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub noticed there is a potential resource leak in
tcindex_set_parms(): when tcindex_filter_result_init() fails
and it jumps to 'errout1' which doesn't release the memory
and resources allocated by tcindex_alloc_perfect_hash().
We should just jump to 'errout_alloc' which calls
tcindex_free_perfect_hash().
Fixes: b9a24bb76b ("net_sched: properly handle failure case of tcf_exts_init()")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an mptcp socket connects to a tcp peer or when a middlebox interferes
with tcp options, mptcp needs to fall back to plain tcp.
Problem is that mptcp is trying to be too clever in this case:
It attempts to close the mptcp meta sk and transparently replace it with
the (only) subflow tcp sk.
Unfortunately, this is racy -- the socket is already exposed to userspace.
Any parallel calls to send/recv/setsockopt etc. can cause use-after-free:
BUG: KASAN: use-after-free in atomic_try_cmpxchg include/asm-generic/atomic-instrumented.h:693 [inline]
CPU: 1 PID: 2083 Comm: syz-executor.1 Not tainted 5.5.0 #2
atomic_try_cmpxchg include/asm-generic/atomic-instrumented.h:693 [inline]
queued_spin_lock include/asm-generic/qspinlock.h:78 [inline]
do_raw_spin_lock include/linux/spinlock.h:181 [inline]
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:136 [inline]
_raw_spin_lock_bh+0x71/0xd0 kernel/locking/spinlock.c:175
spin_lock_bh include/linux/spinlock.h:343 [inline]
__lock_sock+0x105/0x190 net/core/sock.c:2414
lock_sock_nested+0x10f/0x140 net/core/sock.c:2938
lock_sock include/net/sock.h:1516 [inline]
mptcp_setsockopt+0x2f/0x1f0 net/mptcp/protocol.c:800
__sys_setsockopt+0x152/0x240 net/socket.c:2130
__do_sys_setsockopt net/socket.c:2146 [inline]
__se_sys_setsockopt net/socket.c:2143 [inline]
__x64_sys_setsockopt+0xba/0x150 net/socket.c:2143
do_syscall_64+0xb7/0x3d0 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x44/0xa9
While the use-after-free can be resolved, there is another problem:
sock->ops and sock->sk assignments are not atomic, i.e. we may get calls
into mptcp functions with sock->sk already pointing at the subflow socket,
or calls into tcp functions with a mptcp meta sk.
Remove the fallback code and call the relevant functions for the (only)
subflow in case the mptcp socket is connected to tcp peer.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Diagnosed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace with appropriate types.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace with appropriate types.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/netdevsim/dev.c:937:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Fixes: 6556ff32f1 ("netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs")
CC: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 0ce5ebd24d ("mfd: ioc3: Add driver for SGI IOC3 chip") moved
request_irq() from ioc3_open into probe function, but forgot to remove
free_irq() from ioc3_close.
Fixes: 0ce5ebd24d ("mfd: ioc3: Add driver for SGI IOC3 chip")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
RHBZ: 1579050
If we have a soft mount we should fail commands for session-setup
failures (such as the password having changed/ account being deleted/ ...)
and return an error back to the application.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Add check for null cifs_sb to create_options helper
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
A collection of updates for bugs fixed since the initial pull
request, the most important one being the addition of COMMON_CLK
for wcd934x which is needed for MFD to be merged.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl46jnATHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0FfTB/9pn+BR2PZWE349/Etdj4Tb0mHO3mfG
7sptuPYCXrFRJ82HPcSIIY8nUMBP+lYciIBE4Dn09QDxwPALFuEuzcM7XmJpJIKJ
Vg9ooyYC4/59ijQJXFGR61Xaf30PcvdxE1sC3+SEt6ROn9C/whZHFzpnPJgmeFbq
LIVI2ne/QpPQ+fozvUjkr8nOrEbLIhH6DeCRKExmQ5PYnM7fO//s51HmCUOAxQwJ
FvEH2NCZwvGA43xSYeAdWfE1C3DgdEIT1VKEfeA+Va2tjwPz64mtA6xbaNW99xV6
5/ii/c1x3Yjvy+F6IAqrmwCDZWQJ+xIgy4nbNLd2V8t1alYKWz22aVOr
=qO+a
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.6
A collection of updates for bugs fixed since the initial pull
request, the most important one being the addition of COMMON_CLK
for wcd934x which is needed for MFD to be merged.
As the bootconfig is appended to the initrd it is not as easy to modify as
the kernel command line. If there's some issue with the kernel, and the
developer wants to boot a pristine kernel, it should not be needed to modify
the initrd to remove the bootconfig for a single boot.
As bootconfig is silently added (if the admin does not know where to look
they may not know it's being loaded). It should be explicitly added to the
kernel cmdline. The loading of the bootconfig is only done if "bootconfig"
is on the kernel command line. This will let admins know that the kernel
command line is extended.
Note, after adding printk()s for when the size is too great or the checksum
is wrong, exposed that the current method always looked for the boot config,
and if this size and checksum matched, it would parse it (as if either is
wrong a printk has been added to show this). It's better to only check this
if the boot config is asked to be looked for.
Link: https://lore.kernel.org/r/CAHk-=wjfjO+h6bQzrTf=YCZA53Y3EDyAs3Z4gEsT7icA3u_Psw@mail.gmail.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The $id path checks were inadequately checking the path part of the $id
value. With the check fixed, there's a number of errors that need to be
fixed. Most of the errors are including 'bindings/' in the path which
should not be as that is considered the root.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Stefan Popa <stefan.popa@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: Kent Gustavsson <kent@minoris.se>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
perf maps:
Cengiz Can:
- Add missing unlock to maps__insert() error case.
srcline:
Changbin Du:
- Make perf able to build with latest libbfd.
perf parse:
Leo Yan:
- Keep copy of string in perf_evsel_config_term() to fix sink terms
processing in ARM CoreSight.
perf test:
Thomas Richter:
- Fix test case Merge cpu map, removing extra reference count drop that
causes a segfault on s/390.
perf probe:
Thomas Richter:
- Add ustring support for perf probe command
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXjUwAgAKCRCyPKLppCJ+
J163AQCvl98mgSHfAVq9roP3ip1T1TwLXT+zPA9aOEc95d7NwwD9EuHVfs1kIjfV
+nv8/i3T3YVq1Dlx9MkvKEVQwJdiCws=
=f/tq
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.6-20200201' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf maps:
Cengiz Can:
- Add missing unlock to maps__insert() error case.
srcline:
Changbin Du:
- Make perf able to build with latest libbfd.
perf parse:
Leo Yan:
- Keep copy of string in perf_evsel_config_term() to fix sink terms
processing in ARM CoreSight.
perf test:
Thomas Richter:
- Fix test case Merge cpu map, removing extra reference count drop that
causes a segfault on s/390.
perf probe:
Thomas Richter:
- Add ustring support for perf probe command
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull parisc updates from Helge Deller:
"A page table initialization cleanup from Mike Rapoport and regenerated
defconfig files from Helge Deller"
* 'parisc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Regenerate parisc defconfigs
parisc: map_pages(): cleanup page table initialization
Drop redundant result moving from inline assembly, use a1 and b1 values
as return value and errno value respectively.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Allow vectors to be either merged into the kernel .text or put at a
fixed virtual address independently of XIP option. Drop option that
puts vectors at a fixed offset from the kernel text. Add choice to
Kconfig.
Vectors at fixed virtual address may be useful for XIP-aware MTD support
and for noMMU configurations with available IRAM. Configurations without
VECBASE register must put their vectors at specific locations regardless
of the selected option. All other configurations should happily use
merged vectors.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
There's no real dependency between SMP and XIP, allow them to be
selected together. Always define 2- and 4-argument SECTION_VECTOR
macros, always use 4-argument macro for the secondary reset vector and
always define relocation entry for it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
On XIP kernels it makes sense to have exception vectors and fast
exception handlers together (in a fast memory). In addition, with MTD
XIP support both vectors and fast exception handlers must be outside of
the FLASH.
Add section .exception.text and move fast exception handlers to it.
Put it together with vectors when vectors are outside of the .text.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Pull vfs recursive removal updates from Al Viro:
"We have quite a few places where synthetic filesystems do an
equivalent of 'rm -rf', with varying amounts of code duplication,
wrong locking, etc. That really ought to be a library helper.
Only debugfs (and very similar tracefs) are converted here - I have
more conversions, but they'd never been in -next, so they'll have to
wait"
* 'work.recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
simple_recursive_removal(): kernel-side rm -rf for ramfs-style filesystems
Since commit 89b9060987 ("kconfig: Add yes2modconfig and
mod2yesconfig targets.") forgot to clear SYMBOL_VALID bit after
changing to y or m, these targets did not save the changes.
Call sym_clear_all_valid() so that all symbols are revalidated.
Fixes: 89b9060987 ("kconfig: Add yes2modconfig and mod2yesconfig targets.")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
kallsyms_token_table[] only contains ASCII characters. It should be
char instead of u8.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
It needed to be updated as well so it will show the proper values
if you reset to the defaults.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
syzbot reports a use-after-free in io_ring_file_ref_switch() when it
tries to switch back to percpu mode. When we put the final reference to
the table by calling percpu_ref_kill_and_confirm(), we don't want the
zero reference to queue async work for flushing the potentially queued
up items. We currently do a few flush_work(), but they merely paper
around the issue, since the work item may not have been queued yet
depending on the when the percpu-ref callback gets run.
Coming into the file unregister, we know we have the ring quiesced.
io_ring_file_ref_switch() can check for whether or not the ref is dying
or not, and not queue anything async at that point. Once the ref has
been confirmed killed, flush any potential items manually.
Reported-by: syzbot+7caeaea49c2c8a591e3d@syzkaller.appspotmail.com
Fixes: 05f3fb3c53 ("io_uring: avoid ring quiesce for fixed file set unregister and update")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Clean up the language in one paragraph in the PM QoS description in
Documentation/admin-guide/pm/cpuidle.rst.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As part of io_uring shutdown, we cancel work that is pending and won't
necessarily complete on its own. That includes requests like poll
commands and timeouts.
If we're using SQPOLL for kernel side submission and we shutdown the
ring immediately after queueing such work, we can race with the sqthread
doing the submission. This means we may miss cancelling some work, which
results in the io_uring shutdown hanging forever.
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove <dt-bindings/clock/intel,lgm-clk.h> dependency as
it is not present in the mainline tree. Use numeric value
instead of LGM_GCLK_PCIE10 macro.
Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
[robh: Also drop interrupt-parent from example]
Signed-off-by: Rob Herring <robh@kernel.org>
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Pull NVMe fixes from Keith.
* 'nvme-5.6' of git://git.infradead.org/nvme:
nvmet: update AEN list and array at one place
nvmet: Fix controller use after free
nvmet: Fix error print message at nvmet_install_queue function
nvme-pci: remove nvmeq->tags
nvmet: fix dsm failure when payload does not match sgl descriptor
nvmet: Pass lockdep expression to RCU lists
