The MQS codec isn't an i2c device, so use of_find_device_by_node
to get platform device pointer.
Because MQS only support playback, then add a new audio map.
And there maybe "model" property or no "audio-routing" property in
devicetree, so add some enhancement for these two property.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/918505decb7f757f12c38059c590984f28d2f3a4.1592369271.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200613204422.24484-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
The below series of patches support the KeemBay ASoC platform driver.
The platform driver initialize the i2s to capture and playback the
pcm data on the ARM. The i2s is running in polling mode.
There is no DSP in the KeemBay SoC. Users are rely on the Gstreamer plugin
to perform Audio preprocessing.
Audio graph card is used to connect the platform driver with the
tlv320aic3204 codec.
Change History:
v5:
- Remove OF dependency from Kconfig as OF is shifted to audio graph card.
v4:
- Reduce if-otology at the tx/rx function.
- Fix indentation.
- specify .rate directly
v3:
- Adjusted header format.
- Use Audio graph card instead of custom sound card.
- Use if-else instead of conditional operator.
- Enabled .set_fmt to configure master clock.
v2:
- Corrected I2S naming for DT binding.
v1:
- Initial version.
Sia Jee Heng (3):
ASoC: Intel: Add KeemBay platform driver
ASoC: Intel: Add makefiles and kconfig changes for KeemBay
dt-bindings: sound: Add documentation for KeemBay i2s
.../bindings/sound/intel,keembay-i2s.yaml | 68 +++
sound/soc/intel/Kconfig | 7 +
sound/soc/intel/Makefile | 1 +
sound/soc/intel/keembay/Makefile | 4 +
sound/soc/intel/keembay/kmb_platform.c | 654 +++++++++++++++++++++
sound/soc/intel/keembay/kmb_platform.h | 145 +++++
6 files changed, 879 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
create mode 100644 sound/soc/intel/keembay/Makefile
create mode 100644 sound/soc/intel/keembay/kmb_platform.c
create mode 100644 sound/soc/intel/keembay/kmb_platform.h
--
1.9.1
Having mixer control to switch between DMICs prevents user to
initiate capture simultaneously on both the DMIcs.
Earlier 2 separate devices, one for each DMIC, gave an option of
using them simultaneously, which is not supported.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200530095519.24324-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add amp common init function to gather common init setting and finaize.
- add max98390_init_regs func
- move amp setting to max98390_init_regs func.
- removed unneceary setting and finalize common register values.
Signed-off-by: Steve Lee <steves.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20200611094718.18371-1-steves.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200614033344.1814-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200614033749.2975-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two platform variables for headphone jack detection.
"hp_cfg" is for configuration of heaphone jack detection.
"gpio_cfg" is for configuration of gpio, the gpio is used
for plug & unplug interrupt on SoC.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1591180013-12416-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Samsung Aries boards have a WM8994 codec connected to the Samsung
I2S controller, the BT codec, and the cellular modem. Jack detection
is done by a combination of an ADC, GPIOs, and an extcon device for
the USB dock. There is also a GPIO for selection between the Mic
path and the TV out path on the headphone jack.
There are two main variants, one with an FM radio and where the modem
is the master and one without a radio and the modem is the slave.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/BN6PR04MB06608CBF03EF27B70B175978A39F0@BN6PR04MB0660.namprd04.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190703163224.1029-1-huangfq.daxian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add makefile and kconfig changes for Intel KeemBay platform driver.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Link: https://lore.kernel.org/r/1591682783-1923-3-git-send-email-jee.heng.sia@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add KeemBay ASoC platform driver which initialize the i2s controller
and uses i2s to capture and transmit pcm data to external codec.
The i2s is running in polling mode.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Link: https://lore.kernel.org/r/1591682783-1923-2-git-send-email-jee.heng.sia@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Obtained with:
$ make W=1
sound/soc/fsl/fsl_easrc.c:403: warning: Function parameter or member 'easrc' not described in 'fsl_easrc_normalize_filter'
sound/soc/fsl/fsl_easrc.c:403: warning: Function parameter or member 'infilter' not described in 'fsl_easrc_normalize_filter'
sound/soc/fsl/fsl_easrc.c:403: warning: Function parameter or member 'outfilter' not described in 'fsl_easrc_normalize_filter'
sound/soc/fsl/fsl_easrc.c:403: warning: Function parameter or member 'shift' not described in 'fsl_easrc_normalize_filter'
Fixes: 955ac62405 ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/d166b868e6d294de47a89857be03758ec82a0a61.1591155860.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Obtained with:
$ make W=1
unsigned int int_bits;
^
struct device *dev;
^
struct device *dev;
^
Fixes: 955ac62405 ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
sound/soc/fsl/fsl_easrc.c: In function 'fsl_easrc_set_rs_ratio':
sound/soc/fsl/fsl_easrc.c:182:15: warning: variable 'int_bits' set but not used [-Wunused-but-set-variable]
sound/soc/fsl/fsl_easrc.c: In function 'fsl_easrc_set_ctx_organziation':
sound/soc/fsl/fsl_easrc.c:1204:17: warning: variable 'dev' set but not used [-Wunused-but-set-variable]
sound/soc/fsl/fsl_easrc.c: In function 'fsl_easrc_release_context':
sound/soc/fsl/fsl_easrc.c:1294:17: warning: variable 'dev' set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/91ceb59e3bce31c9e93abba06f5156692ff5c71e.1591155860.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Obtained with:
$ make W=1
sound/soc/fsl/fsl_easrc.c:967:5: warning: no previous prototype for function 'fsl_easrc_config_context' [-Wmissing-prototypes]
int fsl_easrc_config_context(struct fsl_asrc *easrc, unsigned int ctx_id)
^
sound/soc/fsl/fsl_easrc.c:967:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int fsl_easrc_config_context(struct fsl_asrc *easrc, unsigned int ctx_id)
^
static
sound/soc/fsl/fsl_easrc.c:1128:5: warning: no previous prototype for function 'fsl_easrc_set_ctx_format' [-Wmissing-prototypes]
int fsl_easrc_set_ctx_format(struct fsl_asrc_pair *ctx,
^
sound/soc/fsl/fsl_easrc.c:1128:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int fsl_easrc_set_ctx_format(struct fsl_asrc_pair *ctx,
^
static
sound/soc/fsl/fsl_easrc.c:1201:5: warning: no previous prototype for function 'fsl_easrc_set_ctx_organziation' [-Wmissing-prototypes]
int fsl_easrc_set_ctx_organziation(struct fsl_asrc_pair *ctx)
^
sound/soc/fsl/fsl_easrc.c:1201:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int fsl_easrc_set_ctx_organziation(struct fsl_asrc_pair *ctx)
^
static
sound/soc/fsl/fsl_easrc.c:1245:5: warning: no previous prototype for function 'fsl_easrc_request_context' [-Wmissing-prototypes]
int fsl_easrc_request_context(int channels, struct fsl_asrc_pair *ctx)
^
sound/soc/fsl/fsl_easrc.c:1245:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int fsl_easrc_request_context(int channels, struct fsl_asrc_pair *ctx)
^
static
sound/soc/fsl/fsl_easrc.c:1290:6: warning: no previous prototype for function 'fsl_easrc_release_context' [-Wmissing-prototypes]
void fsl_easrc_release_context(struct fsl_asrc_pair *ctx)
^
sound/soc/fsl/fsl_easrc.c:1290:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void fsl_easrc_release_context(struct fsl_asrc_pair *ctx)
^
static
sound/soc/fsl/fsl_easrc.c:1317:5: warning: no previous prototype for function 'fsl_easrc_start_context' [-Wmissing-prototypes]
int fsl_easrc_start_context(struct fsl_asrc_pair *ctx)
^
sound/soc/fsl/fsl_easrc.c:1317:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int fsl_easrc_start_context(struct fsl_asrc_pair *ctx)
^
static
sound/soc/fsl/fsl_easrc.c:1335:5: warning: no previous prototype for function 'fsl_easrc_stop_context' [-Wmissing-prototypes]
int fsl_easrc_stop_context(struct fsl_asrc_pair *ctx)
^
sound/soc/fsl/fsl_easrc.c:1335:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int fsl_easrc_stop_context(struct fsl_asrc_pair *ctx)
^
static
sound/soc/fsl/fsl_easrc.c:1382:18: warning: no previous prototype for function 'fsl_easrc_get_dma_channel' [-Wmissing-prototypes]
struct dma_chan *fsl_easrc_get_dma_channel(struct fsl_asrc_pair *ctx,
^
sound/soc/fsl/fsl_easrc.c:1382:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
struct dma_chan *fsl_easrc_get_dma_channel(struct fsl_asrc_pair *ctx,
^
static
Fixes: 955ac62405 ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/ab1b83a56c71f4159a98e6da5602c2c36fe59f4d.1591155860.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now, soc_pcm_trigger_start/stop() are simple enough.
Let's merge these into soc_pcm_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87ftbbw8wj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-io.c has snd_soc_component_xxx() functions for I/O.
We have soc-componennt.c for it.
Let's merge soc-io.c into soc-component.c
By this patch, original soc-io.c functions start to use
soc_component_err() when error case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87h7vrw8ws.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
we wantn't to directly access to component related parameter
as much as possible to keep encapsulation.
This patch adds snd_soc_component_init() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87img7w8x2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_component_xxx() is focusing to component itself,
snd_soc_pcm_component_xxx() is focusing to rtd related component.
Now we can update snd_soc_component_trigger() to
snd_soc_pcm_component_trigger(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87k10nw8xf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_component_xxx() is focusing to component itself,
snd_soc_pcm_component_xxx() is focusing to rtd related component.
Now we can update snd_soc_component_hw_free() to
snd_soc_pcm_component_hw_free(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87lfl3w8xv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_component_xxx() is focusing to component itself,
snd_soc_pcm_component_xxx() is focusing to rtd related component.
Now we can update snd_soc_component_hw_params() to
snd_soc_pcm_component_hw_params(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu5jw8y8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have 2 type of component functions
snd_soc_component_xxx() is focusing to component itself,
snd_soc_pcm_component_xxx() is focusing to rtd related component.
Now we can update snd_soc_component_prepare() to
snd_soc_pcm_component_prepare(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8pzw8yl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At soc-component.c, it is good idea to indicate error function and
its component name if there was error.
This patch adds soc_component_err() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pnafw8z2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_component_xxx() should be implemented at soc-component.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r1uvw8zb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-component is handling snd_soc_component_xxx().
Move snd_soc_component_xxx_regmap() to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sgfbw8zl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-component has too many snd_soc_component_xxx_pin_xxx() functions.
The difference between these functions are used function name and
enable/disable.
This patch adds common soc_component_pin() and share code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87tuzrw8zw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide an explicit dmesg trace with the PCM 'new_name', dailink name
and error code to help with debug.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200612204050.25901-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With dynamic debug not enabled, we still see this sort of messages:
[ 47.656671] sof_sdw sof_sdw: info: override BE DAI link SDW0-Playback
[ 47.656677] sof_sdw sof_sdw: info: override BE DAI link SDW0-Capture
[ 47.656682] sof_sdw sof_sdw: info: override BE DAI link SDW1-Playback
[ 47.656686] sof_sdw sof_sdw: info: override BE DAI link SDW3-Capture
[ 47.656691] sof_sdw sof_sdw: info: override BE DAI link iDisp1
[ 47.656695] sof_sdw sof_sdw: info: override BE DAI link iDisp2
[ 47.656699] sof_sdw sof_sdw: info: override BE DAI link iDisp3
This is not really helpful for most users, move to dev_dbg.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200612204050.25901-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset fixes a memory allocation issue and removes a 100%
reproducible use-after-free report thrown by KASAN in automated module
removal tests across multiple platforms.
All the credit goes to Bard Liao for root-causing the issue. DAIs may
be registered at the same time as a component, or when the topology is
loaded. This two-step registration causes the memory for
topology-based DAIs to allocated last, and conversely to be released
first by devres, before the component is released and the DAIs removed
from the component DAI list with snd_soc_unregister_dais().
When we remove a component, by the time we walk through its dai list
to unregister all dais, the dais allocated by the topology have been
freed already by devres and the list is corrupted with pointers that
are no longer valid.
The suggestion is to add an explicit devm_ based registration for
topology-based dais, so that each dai is cleanly removed from the
component dai list in the release operation before devres releases the
allocated memory.
Pierre-Louis Bossart (2):
ASoC: soc-devres: add devm_snd_soc_register_dai()
ASoC: soc-topology: use devm_snd_soc_register_dai()
include/sound/soc.h | 4 ++++
sound/soc/soc-devres.c | 37 +++++++++++++++++++++++++++++++++++++
sound/soc/soc-topology.c | 3 +--
3 files changed, 42 insertions(+), 2 deletions(-)
--
2.20.1
Port commit 6d011d5057 ("ALSA: hda: Clear RIRB status before reading
WP") from legacy HDA driver to fix the get response timeout issue.
Current SOF driver does not suffer from this issue because sync write
is enabled in hda_init. The issue will come back if the sync write is
disabled for some reason.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1591959048-15813-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently both FE and BE dai-links are configured bi-directional,
However the DSP BE dais are only single directional,
so set the directions as supported by the BE dais.
Fixes: c25e295cd7 (ASoC: qcom: Add support to parse common audio device nodes)
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200612123711.29130-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to q6afe_is_rx_port() to get direction
of DSP BE dai port, this is useful for setting dailink
directions correctly.
Fixes: c25e295cd7 (ASoC: qcom: Add support to parse common audio device nodes)
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200612123711.29130-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_dpcm_fe_runtime_update() is called for all dailinks, and we want
to first discard all back-ends, then deal with front-ends.
The existing code first reports an error with multi-cpu front-ends,
and that check needs to be moved after we know that we are dealing
with a front-end.
Fixes: 6e1276a5e6 ('ASoC: Return error if the function does not support multi-cpu')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/1970
Link: https://lore.kernel.org/r/20200612203507.25621-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to ideal rt5682 CCF, the root clk is mclk.
But in some platforms, mclk is not exported to CCF.
In this condition, rt5682_register_dai_clks will not be called.
This patch lets dai clks could be registered whether mclk exists or not.
Signed-off-by: derek.fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1591938925-1070-5-git-send-email-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The registration of DAIs may be done at two distinct times, once
during a component registration and later when loading a
topology. Since devm_ managed resources are freed in the reverse order
they were allocated, when a component starts unregistering DAIs by
walking through the DAI list, the memory allocated for the
topology-registered DAIs was freed already, which leads to 100%
reproducible KASAN use-after-free reports.
This patch suggests a new devm_ function to force the DAI list to be
updated prior to freeing the memory chunks referenced by the list
pointers.
Suggested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/2186
Link: https://lore.kernel.org/r/20200612205938.26415-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
