Commit Graph

10 Commits

Author SHA1 Message Date
Masahiro Yamada
61f838c7fa ARM: dts: uniphier: add reference clock nodes
Add master clock nodes generated by crystal oscillators.

  PH1-sLD3, PH1-LD4: 24.576 MHz
  PH1-Pro4, ProXstream2: 25.000 MHz
  PH1-Pro5: 20.000 MHz

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-03-18 17:39:04 +01:00
Masahiro Yamada
629b557ab4 ARM: dts: uniphier: factor out common nodes to uniphier-common32.dtsi
UniPhier SoCs (except PH1-sLD3) have several nodes in common.
Factor out them into uniphier-common32.dtsi.  This improves the code
maintainability.

PH1-sLD3 is so old that it has more or less different register maps
than the others.  So, it cannot be included in this refactoring.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-12 00:24:50 +01:00
Masahiro Yamada
1b38b0e334 ARM: dts: uniphier: add system-bus-controller nodes
The System Bus Controller block has two register regions,
but having only the second one in a separate node was not nice.

Replace it with a new node with two register regions in it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-31 01:58:06 +00:00
Masahiro Yamada
7c62f299ba ARM: dts: uniphier: add outer cache controller nodes
Add L2 cache controller nodes for all the UniPhier SoC DTSI.
Also, add an L3 cache controller node for PH1-Pro5 DTSI.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-27 09:21:02 +09:00
Masahiro Yamada
68f46897ea ARM: dts: uniphier: add I2C controller device nodes
Add I2C controller device nodes for PH1-sLD3, PH1-LD4, PH1-sLD8
(FIFO-less I2C) and PH1-Pro4 (FIFO-builtin I2C).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-11 15:09:21 +02:00
Masahiro Yamada
622372309f ARM: dts: UniPhier: add UART and USB pinmux nodes
The DT nodes in uniphier-pinctrl.dtsi provide the default pinctrl
settings that would be suitable for most boards.  You can still
override them in your board DTS file if necessary.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27 14:54:47 +02:00
Masahiro Yamada
55d945b249 ARM: dts: UniPhier: add pinctrl device nodes
Add the pinctrol device nodes for UniPhier PH1-LD4, PH1-Pro4,
and PH1-sLD8.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27 14:54:45 +02:00
Masahiro Yamada
3fbf02a85b ARM: dts: UniPhier: add USB EHCI device nodes
No dedicated driver compatible with "socionext,uniphier-ehci" has
been supported in the mainline yet, so it falls into "generic-ehci"
and it works well enough with our USB 2.0 host controllers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-14 11:21:45 +02:00
Masahiro Yamada
1bf4250702 ARM: dts: UniPhier: add on-chip UART device nodes
The UniPhier on-chip UART driver was merged into the mainline by
commit 1a8d2903cb ("serial: 8250_uniphier: add UniPhier serial
driver").

Add device nodes to make it really available.

We no longer have to depend on the on-board UART device (16550A),
so let's change the chosen and aliases to point to the on-chip ones.
Also, turn on the on-board Ethernet device.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-14 11:21:43 +02:00
Masahiro Yamada
8e678e06e7 ARM: dts: UniPhier: add support for UniPhier SoCs and boards
Initial device trees for UniPhier SoCs: PH1-sLD3, PH1-LD4, PH1-Pro4,
and PH1-sLD8.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-12 16:56:27 +02:00