...instead of kstrtol with a dirty cast.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The 'ts' argument of process_adj_status() and process_adjtimex_modes()
is unused and can be safely removed.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Pull timekeeping updates from John Stultz:
- Make the timekeeping update more precise when NTP frequency is set
directly by updating the multiplier.
- Adjust selftests
- Join split message for easier grepping,
- Use pr_*() instead of printk*(),
- Use %u to format unsigned cpu numbers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180712144118.8819-1-geert+renesas@glider.be
This reverts commit 1332a90558.
The original issue was not because of incorrect checking of cpumask for
both new and old tick device. It was incorrectly analysed was due to the
misunderstanding of the comment and misinterpretation of the return value
from tick_check_preferred. The main issue is with the clockevent driver
that sets the cpumask to cpu_all_mask instead of cpu_possible_mask.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1531151136-18297-1-git-send-email-sudeep.holla@arm.com
When the NTP frequency is set directly from userspace using the
ADJ_FREQUENCY or ADJ_TICK timex mode, immediately update the
timekeeper's multiplier instead of waiting for the next tick.
This removes a hidden non-deterministic delay in setting of the
frequency and allows an extremely tight control of the system clock
with update rates close to or even exceeding the kernel HZ.
The update is limited to archs using modern timekeeping
(!ARCH_USES_GETTIMEOFFSET).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Air Icy reported:
UBSAN: Undefined behaviour in kernel/time/alarmtimer.c:811:7
signed integer overflow:
1529859276030040771 + 9223372036854775807 cannot be represented in type 'long long int'
Call Trace:
alarm_timer_nsleep+0x44c/0x510 kernel/time/alarmtimer.c:811
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1235 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1213 [inline]
__x64_sys_clock_nanosleep+0x326/0x4e0 kernel/time/posix-timers.c:1213
do_syscall_64+0xb8/0x3a0 arch/x86/entry/common.c:290
alarm_timer_nsleep() uses ktime_add() to add the current time and the
relative expiry value. ktime_add() has no sanity checks so the addition
can overflow when the relative timeout is large enough.
Use ktime_add_safe() which has the necessary sanity checks in place and
limits the result to the valid range.
Fixes: 9a7adcf5c6 ("timers: Posix interface for alarm-timers")
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1807020926360.1595@nanos.tec.linutronix.de
The posix timer overrun handling is broken because the forwarding functions
can return a huge number of overruns which does not fit in an int. As a
consequence timer_getoverrun(2) and siginfo::si_overrun can turn into
random number generators.
The k_clock::timer_forward() callbacks return a 64 bit value now. Make
k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal
accounting is correct. 3Remove the temporary (int) casts.
Add a helper function which clamps the overrun value returned to user space
via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value
between 0 and INT_MAX. INT_MAX is an indicator for user space that the
overrun value has been clamped.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de
The posix timer ti_overrun handling is broken because the forwarding
functions can return a huge number of overruns which does not fit in an
int. As a consequence timer_getoverrun(2) and siginfo::si_overrun can turn
into random number generators.
As a first step to address that let the timer_forward() callbacks return
the full 64 bit value.
Cast it to (int) temporarily until k_itimer::ti_overrun is converted to
64bit and the conversion to user space visible values is sanitized.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132704.922098090@linutronix.de
struct itimerspec is not y2038-safe.
Introduce a new struct __kernel_itimerspec based on the kernel internal
y2038-safe struct itimerspec64.
The definition of struct __kernel_itimerspec includes two struct
__kernel_timespec.
Since struct __kernel_timespec has the same representation in native and
compat modes, so does struct __kernel_itimerspec. This helps have a common
entry point for syscalls using struct __kernel_itimerspec.
New y2038-safe syscalls will use this new type. Since most of the new
syscalls are just an update to the native syscalls with the type update,
place the new definition under CONFIG_64BIT_TIME. This helps architectures
that do not support the above config to keep using the old definition of
struct itimerspec.
Also change the get/put_itimerspec64 to use struct__kernel_itimerspec.
This will help 32 bit architectures to use the new syscalls when
architectures select CONFIG_64BIT_TIME.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: viro@zeniv.linux.org.uk
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: y2038@lists.linaro.org
Link: https://lkml.kernel.org/r/20180617051144.29756-2-deepa.kernel@gmail.com
For the common cases where 1000 is a multiple of HZ, or HZ is a multiple of
1000, jiffies_to_msecs() never returns zero when passed a non-zero time
period.
However, if HZ > 1000 and not an integer multiple of 1000 (e.g. 1024 or
1200, as used on alpha and DECstation), jiffies_to_msecs() may return zero
for small non-zero time periods. This may break code that relies on
receiving back a non-zero value.
jiffies_to_usecs() does not need such a fix: one jiffy can only be less
than one µs if HZ > 1000000, and such large values of HZ are already
rejected at build time, twice:
- include/linux/jiffies.h does #error if HZ >= 12288,
- kernel/time/time.c has BUILD_BUG_ON(HZ > USEC_PER_SEC).
Broken since forever.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-alpha@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622143357.7495-1-geert@linux-m68k.org
Some of the oddly named time accessor functions now have a more consistent
naming, which should be used from now on so the aliases can be removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: y2038@lists.linaro.org
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/20180618143246.3865099-1-arnd@arndb.de
The two do the same, this moves all users to the newer name for consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: y2038@lists.linaro.org
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Link: https://lkml.kernel.org/r/20180618140811.2998503-3-arnd@arndb.de
Both get_seconds() and do_gettimeofday() are deprecated. Change the time()
implementation to use the replacement function instead.
Obviously the system call will still overflow in 2038, but this gets us
closer to removing the old helper functions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: y2038@lists.linaro.org
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20180618140811.2998503-2-arnd@arndb.de
Commit b5793b0d92 added support for building the nanosleep compat system
call on 32-bit architectures, but missed one change in nanosleep_copyout(),
which would trigger a BUG() as soon as any architecture is switched over to
use it.
Use the proper config symbol to enable the code path.
Fixes: Commit b5793b0d92 ("posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: y2038@lists.linaro.org
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20180618140811.2998503-1-arnd@arndb.de
The lockdep_assert_irqs_disabled() was a BUG_ON() statement in the
beginning and it was added just before the "spin_lock(siglock)"
statement to ensure this lock was taken with disabled interrupts.
This is no longer the case: the siglock is acquired via
lock_task_sighand() and this function already disables the interrupts.
The lock is also acquired before this "lockdep_assert_irqs_disabled" so
it is best to remove it.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r20180504152548.7166-1-bigeasy@linutronix.de
These include a significant update of the generic power domains (genpd)
and Operating Performance Points (OPP) frameworks, mostly related to
the introduction of power domain performance levels, cpufreq updates
(new driver for Qualcomm Kryo processors, updates of the existing
drivers, some core fixes, schedutil governor improvements), PCI power
management fixes, ACPI workaround for EC-based wakeup events handling
on resume from suspend-to-idle, and major updates of the turbostat
and pm-graph utilities.
Specifics:
- Introduce power domain performance levels into the the generic
power domains (genpd) and Operating Performance Points (OPP)
frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).
- Fix two issues in the runtime PM framework related to the
initialization and removal of devices using device links (Ulf
Hansson).
- Clean up the initialization of drivers for devices in PM domains
(Ulf Hansson, Geert Uytterhoeven).
- Fix a cpufreq core issue related to the policy sysfs interface
causing CPU online to fail for CPUs sharing one cpufreq policy in
some situations (Tao Wang).
- Make it possible to use platform-specific suspend/resume hooks
in the cpufreq-dt driver and make the Armada 37xx DVFS use that
feature (Viresh Kumar, Miquel Raynal).
- Optimize policy transition notifications in cpufreq (Viresh Kumar).
- Improve the iowait boost mechanism in the schedutil cpufreq
governor (Patrick Bellasi).
- Improve the handling of deferred frequency updates in the
schedutil cpufreq governor (Joel Fernandes, Dietmar Eggemann,
Rafael Wysocki, Viresh Kumar).
- Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).
- Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman,
Viresh Kumar).
- Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag
set and update stale comments in the PCI core PM code (Rafael
Wysocki).
- Work around an issue related to the handling of EC-based wakeup
events in the ACPI PM core during resume from suspend-to-idle if
the EC has been put into the low-power mode (Rafael Wysocki).
- Improve the handling of wakeup source objects in the PM core (Doug
Berger, Mahendran Ganesh, Rafael Wysocki).
- Update the driver core to prevent deferred probe from breaking
suspend/resume ordering (Feng Kan).
- Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
Wysocki).
- Make the core suspend/resume code and cpufreq support the RT patch
(Sebastian Andrzej Siewior, Thomas Gleixner).
- Consolidate the PM QoS handling in cpuidle governors (Rafael
Wysocki).
- Fix a possible crash in the hibernation core (Tetsuo Handa).
- Update the rockchip-io Adaptive Voltage Scaling (AVS) driver
(David Wu).
- Update the turbostat utility (fixes, cleanups, new CPU IDs, new
command line options, built-in "Low Power Idle" counters support,
new POLL and POLL% columns) and add an entry for it to MAINTAINERS
(Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
Prarit Bhargava, Srinivas Pandruvada).
- Update the pm-graph to version 5.1 (Todd Brandt).
- Update the intel_pstate_tracer utility (Doug Smythies).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wqBV
-----END PGP SIGNATURE-----
Merge tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include a significant update of the generic power domains
(genpd) and Operating Performance Points (OPP) frameworks, mostly
related to the introduction of power domain performance levels,
cpufreq updates (new driver for Qualcomm Kryo processors, updates of
the existing drivers, some core fixes, schedutil governor
improvements), PCI power management fixes, ACPI workaround for
EC-based wakeup events handling on resume from suspend-to-idle, and
major updates of the turbostat and pm-graph utilities.
Specifics:
- Introduce power domain performance levels into the the generic
power domains (genpd) and Operating Performance Points (OPP)
frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).
- Fix two issues in the runtime PM framework related to the
initialization and removal of devices using device links (Ulf
Hansson).
- Clean up the initialization of drivers for devices in PM domains
(Ulf Hansson, Geert Uytterhoeven).
- Fix a cpufreq core issue related to the policy sysfs interface
causing CPU online to fail for CPUs sharing one cpufreq policy in
some situations (Tao Wang).
- Make it possible to use platform-specific suspend/resume hooks in
the cpufreq-dt driver and make the Armada 37xx DVFS use that
feature (Viresh Kumar, Miquel Raynal).
- Optimize policy transition notifications in cpufreq (Viresh Kumar).
- Improve the iowait boost mechanism in the schedutil cpufreq
governor (Patrick Bellasi).
- Improve the handling of deferred frequency updates in the schedutil
cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki,
Viresh Kumar).
- Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).
- Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh
Kumar).
- Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set
and update stale comments in the PCI core PM code (Rafael Wysocki).
- Work around an issue related to the handling of EC-based wakeup
events in the ACPI PM core during resume from suspend-to-idle if
the EC has been put into the low-power mode (Rafael Wysocki).
- Improve the handling of wakeup source objects in the PM core (Doug
Berger, Mahendran Ganesh, Rafael Wysocki).
- Update the driver core to prevent deferred probe from breaking
suspend/resume ordering (Feng Kan).
- Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
Wysocki).
- Make the core suspend/resume code and cpufreq support the RT patch
(Sebastian Andrzej Siewior, Thomas Gleixner).
- Consolidate the PM QoS handling in cpuidle governors (Rafael
Wysocki).
- Fix a possible crash in the hibernation core (Tetsuo Handa).
- Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David
Wu).
- Update the turbostat utility (fixes, cleanups, new CPU IDs, new
command line options, built-in "Low Power Idle" counters support,
new POLL and POLL% columns) and add an entry for it to MAINTAINERS
(Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
Prarit Bhargava, Srinivas Pandruvada).
- Update the pm-graph to version 5.1 (Todd Brandt).
- Update the intel_pstate_tracer utility (Doug Smythies)"
* tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits)
tools/power turbostat: update version number
tools/power turbostat: Add Node in output
tools/power turbostat: add node information into turbostat calculations
tools/power turbostat: remove num_ from cpu_topology struct
tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node
tools/power turbostat: track thread ID in cpu_topology
tools/power turbostat: Calculate additional node information for a package
tools/power turbostat: Fix node and siblings lookup data
tools/power turbostat: set max_num_cpus equal to the cpumask length
tools/power turbostat: if --num_iterations, print for specific number of iterations
tools/power turbostat: Add Cannon Lake support
tools/power turbostat: delete duplicate #defines
x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: add POLL and POLL% column
tools/power turbostat: Fix --hide Pk%pc10
tools/power turbostat: Build-in "Low Power Idle" counters support
tools/power turbostat: Don't make man pages executable
tools/power turbostat: remove blank lines
tools/power turbostat: a small C-states dump readability immprovement
...
Pull timers and timekeeping updates from Thomas Gleixner:
- Core infrastucture work for Y2038 to address the COMPAT interfaces:
+ Add a new Y2038 safe __kernel_timespec and use it in the core
code
+ Introduce config switches which allow to control the various
compat mechanisms
+ Use the new config switch in the posix timer code to control the
32bit compat syscall implementation.
- Prevent bogus selection of CPU local clocksources which causes an
endless reselection loop
- Remove the extra kthread in the clocksource code which has no value
and just adds another level of indirection
- The usual bunch of trivial updates, cleanups and fixlets all over the
place
- More SPDX conversions
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
clocksource/drivers/mxs_timer: Switch to SPDX identifier
clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier
clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier
clocksource/drivers/timer-imx-gpt: Remove outdated file path
clocksource/drivers/arc_timer: Add comments about locking while read GFRC
clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages
clocksource/drivers/sprd: Fix Kconfig dependency
clocksource: Move inline keyword to the beginning of function declarations
timer_list: Remove unused function pointer typedef
timers: Adjust a kernel-doc comment
tick: Prefer a lower rating device only if it's CPU local device
clocksource: Remove kthread
time: Change nanosleep to safe __kernel_* types
time: Change types to new y2038 safe __kernel_* types
time: Fix get_timespec64() for y2038 safe compat interfaces
time: Add new y2038 safe __kernel_timespec
posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME
time: Introduce CONFIG_COMPAT_32BIT_TIME
time: Introduce CONFIG_64BIT_TIME in architectures
compat: Enable compat_get/put_timespec64 always
...
timekeeping suspend/resume calls read_persistent_clock() which takes
rtc_lock. That results in might sleep warnings because at that point
we run with interrupts disabled.
We cannot convert rtc_lock to a raw spinlock as that would trigger
other might sleep warnings.
As a workaround we disable the might sleep warnings by setting
system_state to SYSTEM_SUSPEND before calling sysdev_suspend() and
restoring it to SYSTEM_RUNNING afer sysdev_resume(). There is no lock
contention because hibernate / suspend to RAM is single-CPU at this
point.
In s2idle's case the system_state is set to SYSTEM_SUSPEND before
timekeeping_suspend() which is invoked by the last CPU. In the resume
case it set back to SYSTEM_RUNNING after timekeeping_resume() which is
invoked by the first CPU in the resume case. The other CPUs will block
on tick_freeze_lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bigeasy: cover s2idle in tick_freeze() / tick_unfreeze()]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
I have run into a couple of drivers using current_kernel_time()
suffering from the y2038 problem, and they could be converted
to using ktime_t, but don't have interfaces that skip the nanosecond
calculation at the moment.
This introduces ktime_get_coarse_with_offset() as a simpler
variant of ktime_get_with_offset(), and adds wrappers for the
three time domains we support with the existing function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-5-arnd@arndb.de
The current_kernel_time64, get_monotonic_coarse64, getrawmonotonic64,
get_monotonic_boottime64 and timekeeping_clocktai64 interfaces have
rather inconsistent naming, and they differ in the calling conventions
by passing the output either by reference or as a return value.
Rename them to ktime_get_coarse_real_ts64, ktime_get_coarse_ts64,
ktime_get_raw_ts64, ktime_get_boottime_ts64 and ktime_get_clocktai_ts64
respectively, and provide the interfaces with macros or inline
functions as needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-4-arnd@arndb.de
In a move to make ktime_get_*() the preferred driver interface into the
timekeeping code, sanitizes ktime_get_real_ts64() to be a proper exported
symbol rather than an alias for getnstimeofday64().
The internal __getnstimeofday64() is no longer used, so remove that
and merge it into ktime_get_real_ts64().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-3-arnd@arndb.de
At this point, we have converted most of the kernel to use timespec64
consistently in place of timespec, so it seems it's time to make
timespec64 the native structure and define timespec in terms of that
one on 64-bit architectures.
Starting with gcc-5, the compiler can completely optimize away the
timespec_to_timespec64 and timespec64_to_timespec functions on 64-bit
architectures. With older compilers, we introduce a couple of extra
copies of local variables, but those are easily avoided by using
the timespec64 based interfaces consistently, as we do in most of the
important code paths already.
The main upside of removing the hack is that printing the tv_sec
field of a timespec64 structure can now use the %lld format
string on all architectures without a cast to time64_t. Without
this patch, the field is a 'long' type and would have to be printed
using %ld on 64-bit architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-2-arnd@arndb.de
The inline keyword was not at the beginning of the function declarations.
Fix the following warnings triggered when using W=1:
kernel/time/clocksource.c:456:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
kernel/time/clocksource.c:457:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180516195943.31924-1-malat@debian.org
Variant of proc_create_data that directly take a struct seq_operations
argument + a private state size and drastically reduces the boilerplate
code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
for_each_cpu() unintuitively reports CPU0 as set independent of the actual
cpumask content on UP kernels. This causes an unexpected PIT interrupt
storm on a UP kernel running in an SMP virtual machine on Hyper-V, and as
a result, the virtual machine can suffer from a strange random delay of 1~20
minutes during boot-up, and sometimes it can hang forever.
Protect if by checking whether the cpumask is empty before entering the
for_each_cpu() loop.
[ tglx: Use !IS_ENABLED(CONFIG_SMP) instead of #ifdeffery ]
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org
Cc: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: https://lkml.kernel.org/r/KL1P15301MB000678289FE55BA365B3279ABF990@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
Link: https://lkml.kernel.org/r/KL1P15301MB0006FA63BC22BEB64902EAA0BF930@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
Those three warnings can easily solved by using :: to indicate a
code block:
./kernel/time/timer.c:1259: WARNING: Unexpected indentation.
./kernel/time/timer.c:1261: WARNING: Unexpected indentation.
./kernel/time/timer.c:1262: WARNING: Block quote ends without a blank line; unexpected unindent.
While here, align the lines at the block.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Linux Doc Mailing List <linux-doc@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/f02e6a0ce27f3b5e33415d92d07a40598904b3ee.1525684985.git.mchehab%2Bsamsung@kernel.org
Checking the equality of cpumask for both new and old tick device doesn't
ensure that it's CPU local device. This will cause issue if a low rating
clockevent tick device is registered first followed by the registration
of higher rating clockevent tick device.
In such case, clockevents_released list will never get emptied as both
the devices get selected as preferred one and we will loop forever in
clockevents_notify_released.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: https://lkml.kernel.org/r/1525881728-4858-1-git-send-email-sudeep.holla@arm.com
A number of places relies on list_empty(&cs->wd_list), however the
list_head does not get initialized. Do so upon registration, such that
thereafter it is possible to rely on list_empty() correctly reflecting
the list membership status.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Diego Viola <diego.viola@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org
Cc: len.brown@intel.com
Cc: rjw@rjwysocki.net
Cc: rui.zhang@intel.com
Link: https://lkml.kernel.org/r/20180430100344.472662715@infradead.org
Because of how the code flips between tsc-early and tsc clocksources
it might need to mark one or both unstable. The current code in
mark_tsc_unstable() only worked because previously it registered the
tsc clocksource once and then never touched it.
Since it now unregisters the tsc-early clocksource, it needs to know
if a clocksource got unregistered and the current cs->mult test
doesn't work for that. Instead use list_empty(&cs->list) to test for
registration.
Furthermore, since clocksource_mark_unstable() needs to place the cs
on the wd_list, it links the cs->list and cs->wd_list serialization.
It must not see a clocsource registered (!empty cs->list) but already
past dequeue_watchdog(). So place {en,de}queue{,_watchdog}() under the
same lock.
Provided cs->list is initialized to empty, this then allows us to
unconditionally use clocksource_mark_unstable(), regardless of the
registration state.
Fixes: aa83c45762 ("x86/tsc: Introduce early tsc clocksource")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Diego Viola <diego.viola@gmail.com>
Cc: len.brown@intel.com
Cc: rjw@rjwysocki.net
Cc: diego.viola@gmail.com
Cc: rui.zhang@intel.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180502135312.GS12217@hirez.programming.kicks-ass.net
Revert commits
92af4dcb4e ("tracing: Unify the "boot" and "mono" tracing clocks")
127bfa5f43 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior")
7250a4047a ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior")
d6c7270e91 ("timekeeping: Remove boot time specific code")
f2d6fdbfd2 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior")
d6ed449afd ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock")
72199320d4 ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock")
As stated in the pull request for the unification of CLOCK_MONOTONIC and
CLOCK_BOOTTIME, it was clear that we might have to revert the change.
As reported by several folks systemd and other applications rely on the
documented behaviour of CLOCK_MONOTONIC on Linux and break with the above
changes. After resume daemons time out and other timeout related issues are
observed. Rafael compiled this list:
* systemd kills daemons on resume, after >WatchdogSec seconds
of suspending (Genki Sky). [Verified that that's because systemd uses
CLOCK_MONOTONIC and expects it to not include the suspend time.]
* systemd-journald misbehaves after resume:
systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal
corrupted or uncleanly shut down, renaming and replacing.
(Mike Galbraith).
* NetworkManager reports "networking disabled" and networking is broken
after resume 50% of the time (Pavel). [May be because of systemd.]
* MATE desktop dims the display and starts the screensaver right after
system resume (Pavel).
* Full system hang during resume (me). [May be due to systemd or NM or both.]
That happens on debian and open suse systems.
It's sad, that these problems were neither catched in -next nor by those
folks who expressed interest in this change.
Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reported-by: Genki Sky <sky@genki.is>,
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Kaike reported that in tests rdma hrtimers occasionaly stopped working. He
did great debugging, which provided enough context to decode the problem.
CPU 3 CPU 2
idle
start sched_timer expires = 712171000000
queue->next = sched_timer
start rdmavt timer. expires = 712172915662
lock(baseof(CPU3))
tick_nohz_stop_tick()
tick = 716767000000 timerqueue_add(tmr)
hrtimer_set_expires(sched_timer, tick);
sched_timer->expires = 716767000000 <---- FAIL
if (tmr->expires < queue->next->expires)
hrtimer_start(sched_timer) queue->next = tmr;
lock(baseof(CPU3))
unlock(baseof(CPU3))
timerqueue_remove()
timerqueue_add()
ts->sched_timer is queued and queue->next is pointing to it, but then
ts->sched_timer.expires is modified.
This not only corrupts the ordering of the timerqueue RB tree, it also
makes CPU2 see the new expiry time of timerqueue->next->expires when
checking whether timerqueue->next needs to be updated. So CPU2 sees that
the rdma timer is earlier than timerqueue->next and sets the rdma timer as
new next.
Depending on whether it had also seen the new time at RB tree enqueue, it
might have queued the rdma timer at the wrong place and then after removing
the sched_timer the RB tree is completely hosed.
The problem was introduced with a commit which tried to solve inconsistency
between the hrtimer in the tick_sched data and the underlying hardware
clockevent. It split out hrtimer_set_expires() to store the new tick time
in both the NOHZ and the NOHZ + HIGHRES case, but missed the fact that in
the NOHZ + HIGHRES case the hrtimer might still be queued.
Use hrtimer_start(timer, tick...) for the NOHZ + HIGHRES case which sets
timer->expires after canceling the timer and move the hrtimer_set_expires()
invocation into the NOHZ only code path which is not affected as it merily
uses the hrtimer as next event storage so code pathes can be shared with
the NOHZ + HIGHRES case.
Fixes: d4af6d933c ("nohz: Fix spurious warning when hrtimer and clockevent get out of sync")
Reported-by: "Wan Kaike" <kaike.wan@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: "Marciniszyn Mike" <mike.marciniszyn@intel.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-rdma@vger.kernel.org
Cc: "Dalessandro Dennis" <dennis.dalessandro@intel.com>
Cc: "Fleck John" <john.fleck@intel.com>
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Weiny Ira" <ira.weiny@intel.com>
Cc: "linux-rdma@vger.kernel.org"
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804241637390.1679@nanos.tec.linutronix.de
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804242119210.1597@nanos.tec.linutronix.de
Change over clock_nanosleep syscalls to use y2038 safe
__kernel_timespec times. This will enable changing over
of these syscalls to use new y2038 safe syscalls when
the architectures define the CONFIG_64BIT_TIME.
Note that nanosleep syscall is deprecated and does not have a
plan for making it y2038 safe. But, the syscall should work as
before on 64 bit machines and on 32 bit machines, the syscall
works correctly until y2038 as before using the existing compat
syscall version. There is no new syscall for supporting 64 bit
time_t on 32 bit architectures.
Cc: linux-api@vger.kernel.org
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Change over clock_settime, clock_gettime and clock_getres
syscalls to use __kernel_timespec times. This will enable
changing over of these syscalls to use new y2038 safe syscalls
when the architectures define the CONFIG_64BIT_TIME.
Cc: linux-api@vger.kernel.org
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
get/put_timespec64() interfaces will eventually be used for
conversions between the new y2038 safe struct __kernel_timespec
and struct timespec64.
The new y2038 safe syscalls have a common entry for native
and compat interfaces.
On compat interfaces, the high order bits of nanoseconds
should be zeroed out. This is because the application code
or the libc do not guarantee zeroing of these. If used without
zeroing, kernel might be at risk of using timespec values
incorrectly.
Note that clearing of bits is dependent on CONFIG_64BIT_TIME
for now. This is until COMPAT_USE_64BIT_TIME has been handled
correctly. x86 will be the first architecture that will use the
CONFIG_64BIT_TIME.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
clock_gettime, clock_settime, clock_getres and clock_nanosleep
compat syscalls are also repurposed to provide backward compatibility
to support 32 bit time_t on 32 bit systems.
Note that nanosleep compat syscall will also be treated the same way
as the above syscalls as it shares common handler functions with
clock_nanosleep. But, there is no plan to provide y2038 safe solution
for nanosleep.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These functions are used in the repurposed compat syscalls
to provide backward compatibility for using 32 bit time_t
on 32 bit systems.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit a9445e47d8 ("posix-cpu-timers: Make set_process_cpu_timer()
more robust") moved the check into the 'if' statement. Unfortunately,
it did so on the right side of an && which means that it may get short
circuited and never evaluated. This is easily reproduced with:
$ cat loop.c
void main() {
struct rlimit res;
/* set the CPU time limit */
getrlimit(RLIMIT_CPU,&res);
res.rlim_cur = 2;
res.rlim_max = 2;
setrlimit(RLIMIT_CPU,&res);
while (1);
}
Which will hang forever instead of being killed. Fix this by pulling the
evaluation out of the if statement but checking the return value instead.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1568337
Fixes: a9445e47d8 ("posix-cpu-timers: Make set_process_cpu_timer() more robust")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: "Max R . P . Grossmann" <m@max.pm>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180417215742.2521-1-labbott@redhat.com
Convert the clockevents driver from old-style printk() to pr_info() and
pr_cont(), to fix split kernel messages like below:
Clockevents: could not switch to one-shot mode:
dummy_timer is not functional.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: https://lkml.kernel.org/r/1522942018-14471-1-git-send-email-geert%2Brenesas@glider.be
Pull x86 fixes from Thomas Gleixner:
"A set of fixes and updates for x86:
- Address a swiotlb regression which was caused by the recent DMA
rework and made driver fail because dma_direct_supported() returned
false
- Fix a signedness bug in the APIC ID validation which caused invalid
APIC IDs to be detected as valid thereby bloating the CPU possible
space.
- Fix inconsisten config dependcy/select magic for the MFD_CS5535
driver.
- Fix a corruption of the physical address space bits when encryption
has reduced the address space and late cpuinfo updates overwrite
the reduced bit information with the original value.
- Dominiks syscall rework which consolidates the architecture
specific syscall functions so all syscalls can be wrapped with the
same macros. This allows to switch x86/64 to struct pt_regs based
syscalls. Extend the clearing of user space controlled registers in
the entry patch to the lower registers"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix signedness bug in APIC ID validity checks
x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption
x86/olpc: Fix inconsistent MFD_CS5535 configuration
swiotlb: Use dma_direct_supported() for swiotlb_ops
syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention
syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
syscalls/core, syscalls/x86: Clean up syscall stub naming convention
syscalls/x86: Extend register clearing on syscall entry to lower registers
syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64
syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls
syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls
syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
x86/syscalls: Don't pointlessly reload the system call number
x86/mm: Fix documentation of module mapping range with 4-level paging
x86/cpuid: Switch to 'static const' specifier
* minor regression test cleanup
* formatting fixes for end user use of kdb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zz/y
-----END PGP SIGNATURE-----
Merge tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb
Pull kdb updates from Jason Wessel:
- fix 2032 time access issues and new compiler warnings
- minor regression test cleanup
- formatting fixes for end user use of kdb
* tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kdb: use memmove instead of overlapping memcpy
kdb: use ktime_get_mono_fast_ns() instead of ktime_get_ts()
kdb: bl: don't use tab character in output
kdb: drop newline in unknown command output
kdb: make "mdr" command repeat
kdb: use __ktime_get_real_seconds instead of __current_kernel_time
misc: kgdbts: Display progress of asynchronous tests
* pm-cpuidle:
tick-sched: avoid a maybe-uninitialized warning
cpuidle: Add definition of residency to sysfs documentation
time: hrtimer: Use timerqueue_iterate_next() to get to the next timer
nohz: Avoid duplication of code related to got_idle_tick
nohz: Gather tick_sched booleans under a common flag field
cpuidle: menu: Avoid selecting shallow states with stopped tick
cpuidle: menu: Refine idle state selection for running tick
sched: idle: Select idle state before stopping the tick
time: hrtimer: Introduce hrtimer_next_event_without()
time: tick-sched: Split tick_nohz_stop_sched_tick()
cpuidle: Return nohz hint from cpuidle_select()
jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC
sched: idle: Do not stop the tick before cpuidle_idle_call()
sched: idle: Do not stop the tick upfront in the idle loop
time: tick-sched: Reorganize idle tick management code
* pm-qos:
PM / QoS: mark expected switch fall-throughs
The use of bitfields seems to confuse gcc, leading to a false-positive
warning in all compiler versions:
kernel/time/tick-sched.c: In function 'tick_nohz_idle_exit':
kernel/time/tick-sched.c:538:2: error: 'now' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This introduces a temporary variable to track the flags so gcc
doesn't have to evaluate twice, eliminating the code path that
leads to the warning.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85301
Fixes: 1cae544d42d2 ("nohz: Gather tick_sched booleans under a common flag field")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use timerqueue_iterate_next() to get to the next timer in
__hrtimer_next_event_base() without browsing the timerqueue
details diredctly.
No intentional changes in functionality.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move the code setting ts->got_idle_tick into tick_sched_do_timer() to
avoid code duplication.
No intentional changes in functionality.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Optimize the space and leave plenty of room for further flags.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
[ rjw: Do not use __this_cpu_read() to access tick_stopped and add
got_idle_tick to avoid overloading inidle ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the tick isn't stopped, the target residency of the state selected
by the menu governor may be greater than the actual time to the next
tick and that means lost energy.
To avoid that, make tick_nohz_get_sleep_length() return the current
time to the next event (before stopping the tick) in addition to the
estimated one via an extra pointer argument and make menu_select()
use that value to refine the state selection when necessary.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
In order to address the issue with short idle duration predictions
by the idle governor after the scheduler tick has been stopped,
reorder the code in cpuidle_idle_call() so that the governor idle
state selection runs before tick_nohz_idle_go_idle() and use the
"nohz" hint returned by cpuidle_select() to decide whether or not
to stop the tick.
This isn't straightforward, because menu_select() invokes
tick_nohz_get_sleep_length() to get the time to the next timer
event and the number returned by the latter comes from
__tick_nohz_idle_stop_tick(). Fortunately, however, it is possible
to compute that number without actually stopping the tick and with
the help of the existing code.
Namely, tick_nohz_get_sleep_length() can be made call
tick_nohz_next_event(), introduced earlier, to get the time to the
next non-highres timer event. If that happens, tick_nohz_next_event()
need not be called by __tick_nohz_idle_stop_tick() again.
If it turns out that the scheduler tick cannot be stopped going
forward or the next timer event is too close for the tick to be
stopped, tick_nohz_get_sleep_length() can simply return the time to
the next event currently programmed into the corresponding clock
event device.
In addition to knowing the return value of tick_nohz_next_event(),
however, tick_nohz_get_sleep_length() needs to know the time to the
next highres timer event, but with the scheduler tick timer excluded,
which can be computed with the help of hrtimer_get_next_event().
That minimum of that number and the tick_nohz_next_event() return
value is the total time to the next timer event with the assumption
that the tick will be stopped. It can be returned to the idle
governor which can use it for predicting idle duration (under the
assumption that the tick will be stopped) and deciding whether or
not it makes sense to stop the tick before putting the CPU into the
selected idle state.
With the above, the sleep_length field in struct tick_sched is not
necessary any more, so drop it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199227
Reported-by: Doug Smythies <dsmythies@telus.net>
Reported-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
The next set of changes will need to compute the time to the next
hrtimer event over all hrtimers except for the scheduler tick one.
To that end introduce a new helper function,
hrtimer_next_event_without(), for computing the time until the next
hrtimer event over all timers except for one and modify the underlying
code in __hrtimer_next_event_base() to prepare it for being called by
that new function.
No intentional changes in functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
In order to address the issue with short idle duration predictions
by the idle governor after the scheduler tick has been stopped, split
tick_nohz_stop_sched_tick() into two separate routines, one computing
the time to the next timer event and the other simply stopping the
tick when the time to the next timer event is known.
Prepare these two routines to be called separately, as one of them
will be called by the idle governor in the cpuidle_select() code
path after subsequent changes.
Update the former callers of tick_nohz_stop_sched_tick() to use
the new routines, tick_nohz_next_event() and tick_nohz_stop_tick(),
instead of it and move the updates of the sleep_length field in
struct tick_sched into __tick_nohz_idle_stop_tick() as it doesn't
need to be updated anywhere else.
There should be no intentional visible changes in functionality
resulting from this change.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Add a new pointer argument to cpuidle_select() and to the ->select
cpuidle governor callback to allow a boolean value indicating
whether or not the tick should be stopped before entering the
selected state to be returned from there.
Make the ladder governor ignore that pointer (to preserve its
current behavior) and make the menu governor return 'false" through
it if:
(1) the idle exit latency is constrained at 0, or
(2) the selected state is a polling one, or
(3) the expected idle period duration is within the tick period
range.
In addition to that, the correction factor computations in the menu
governor need to take the possibility that the tick may not be
stopped into account to avoid artificially small correction factor
values. To that end, add a mechanism to record tick wakeups, as
suggested by Peter Zijlstra, and use it to modify the menu_update()
behavior when tick wakeup occurs. Namely, if the CPU is woken up by
the tick and the return value of tick_nohz_get_sleep_length() is not
within the tick boundary, the predicted idle duration is likely too
short, so make menu_update() try to compensate for that by updating
the governor statistics as though the CPU was idle for a long time.
Since the value returned through the new argument pointer of
cpuidle_select() is not used by its caller yet, this change by
itself is not expected to alter the functionality of the code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Since the subsequent changes will need a TICK_USEC definition
analogous to TICK_NSEC, rename the existing TICK_USEC as
USER_TICK_USEC, update its users and redefine TICK_USEC
accordingly.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Push the decision whether or not to stop the tick somewhat deeper
into the idle loop.
Stopping the tick upfront leads to unpleasant outcomes in case the
idle governor doesn't agree with the nohz code on the duration of the
upcoming idle period. Specifically, if the tick has been stopped and
the idle governor predicts short idle, the situation is bad regardless
of whether or not the prediction is accurate. If it is accurate, the
tick has been stopped unnecessarily which means excessive overhead.
If it is not accurate, the CPU is likely to spend too much time in
the (shallow, because short idle has been predicted) idle state
selected by the governor [1].
As the first step towards addressing this problem, change the code
to make the tick stopping decision inside of the loop in do_idle().
In particular, do not stop the tick in the cpu_idle_poll() code path.
Also don't do that in tick_nohz_irq_exit() which doesn't really have
enough information on whether or not to stop the tick.
Link: https://marc.info/?l=linux-pm&m=150116085925208&w=2 # [1]
Link: https://tu-dresden.de/zih/forschung/ressourcen/dateien/projekte/haec/powernightmares.pdf
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Prepare the scheduler tick code for reworking the idle loop to
avoid stopping the tick in some cases.
The idea is to split the nohz idle entry call to decouple the idle
time stats accounting and preparatory work from the actual tick stop
code, in order to later be able to delay the tick stop once we reach
more power-knowledgeable callers.
Move away the tick_nohz_start_idle() invocation from
__tick_nohz_idle_enter(), rename the latter to
__tick_nohz_idle_stop_tick() and define tick_nohz_idle_stop_tick()
as a wrapper around it for calling it from the outside.
Make tick_nohz_idle_enter() only call tick_nohz_start_idle() instead
of calling the entire __tick_nohz_idle_enter(), add another wrapper
disabling and enabling interrupts around tick_nohz_idle_stop_tick()
and make the current callers of tick_nohz_idle_enter() call it too
to retain their current functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
It may be useful for an architecture to override the definitions of the
COMPAT_SYSCALL_DEFINE0() and __COMPAT_SYSCALL_DEFINEx() macros in
<linux/compat.h>, in particular to use a different calling convention
for syscalls. This patch provides a mechanism to do so, based on the
previously introduced CONFIG_ARCH_HAS_SYSCALL_WRAPPER. If it is enabled,
<asm/sycall_wrapper.h> is included in <linux/compat.h> and may be used
to define the macros mentioned above. Moreover, as the syscall calling
convention may be different if CONFIG_ARCH_HAS_SYSCALL_WRAPPER is set,
the compat syscall function prototypes in <linux/compat.h> are #ifndef'd
out in that case.
As some of the syscalls and/or compat syscalls may not be present,
the COND_SYSCALL() and COND_SYSCALL_COMPAT() macros in kernel/sys_ni.c
as well as the SYS_NI() and COMPAT_SYS_NI() macros in
kernel/time/posix-stubs.c can be re-defined in <asm/syscall_wrapper.h> iff
CONFIG_ARCH_HAS_SYSCALL_WRAPPER is enabled.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-5-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull time(r) updates from Thomas Gleixner:
"A small set of updates for timers and timekeeping:
- The most interesting change is the consolidation of clock MONOTONIC
and clock BOOTTIME.
Clock MONOTONIC behaves now exactly like clock BOOTTIME and does
not longer ignore the time spent in suspend. A new clock
MONOTONIC_ACTIVE is provived which behaves like clock MONOTONIC in
kernels before this change. This allows applications to
programmatically check for the clock MONOTONIC behaviour.
As discussed in the review thread, this has the potential of
breaking user space and we might have to revert this. Knock on wood
that we can avoid that exercise.
- Updates to the NTP mechanism to improve accuracy
- A new kernel internal data structure to aid the ongoing Y2038 work.
- Cleanups and simplifications of the clocksource code.
- Make the alarmtimer code play nicely with debugobjects"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Init nanosleep alarm timer on stack
y2038: Introduce struct __kernel_old_timeval
tracing: Unify the "boot" and "mono" tracing clocks
hrtimer: Unify MONOTONIC and BOOTTIME clock behavior
posix-timers: Unify MONOTONIC and BOOTTIME clock behavior
timekeeping: Remove boot time specific code
Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior
timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock
timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock
timekeeping/ntp: Determine the multiplier directly from NTP tick length
timekeeping/ntp: Don't align NTP frequency adjustments to ticks
clocksource: Use ATTRIBUTE_GROUPS
clocksource: Use DEVICE_ATTR_RW/RO/WO to define device attributes
clocksource: Don't walk the clocksource list for empty override
Pull scheduler updates from Ingo Molnar:
"The main scheduler changes in this cycle were:
- NUMA balancing improvements (Mel Gorman)
- Further load tracking improvements (Patrick Bellasi)
- Various NOHZ balancing cleanups and optimizations (Peter Zijlstra)
- Improve blocked load handling, in particular we can now reduce and
eventually stop periodic load updates on 'very idle' CPUs. (Vincent
Guittot)
- On isolated CPUs offload the final 1Hz scheduler tick as well, plus
related cleanups and reorganization. (Frederic Weisbecker)
- Core scheduler code cleanups (Ingo Molnar)"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
sched/core: Update preempt_notifier_key to modern API
sched/cpufreq: Rate limits for SCHED_DEADLINE
sched/fair: Update util_est only on util_avg updates
sched/cpufreq/schedutil: Use util_est for OPP selection
sched/fair: Use util_est in LB and WU paths
sched/fair: Add util_est on top of PELT
sched/core: Remove TASK_ALL
sched/completions: Use bool in try_wait_for_completion()
sched/fair: Update blocked load when newly idle
sched/fair: Move idle_balance()
sched/nohz: Merge CONFIG_NO_HZ_COMMON blocks
sched/fair: Move rebalance_domains()
sched/nohz: Optimize nohz_idle_balance()
sched/fair: Reduce the periodic update duration
sched/nohz: Stop NOHZ stats when decayed
sched/cpufreq: Provide migration hint
sched/nohz: Clean up nohz enter/exit
sched/fair: Update blocked load from NEWIDLE
sched/fair: Add NOHZ stats balancing
sched/fair: Restructure nohz_balance_kick()
...
Pull RCU updates from Ingo Molnar:
"The main RCU subsystem changes in this cycle were:
- Miscellaneous fixes, perhaps most notably removing obsolete code
whose only purpose in life was to gather information for the
now-removed RCU debugfs facility. Other notable changes include
removing NO_HZ_FULL_ALL in favor of the nohz_full kernel boot
parameter, minor optimizations for expedited grace periods, some
added tracing, creating an RCU-specific workqueue using Tejun's new
WQ_MEM_RECLAIM flag, and several cleanups to code and comments.
- SRCU cleanups and optimizations.
- Torture-test updates, perhaps most notably the adding of ARMv8
support, but also including numerous cleanups and usability fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
rcu: Create RCU-specific workqueues with rescuers
torture: Provide more sensible nreader/nwriter defaults for rcuperf
torture: Grace periods do not piggyback off of themselves
torture: Adjust rcuperf trace processing to allow for workqueues
torture: Default jitter off when running rcuperf
torture: Specify qemu memory size with --memory argument
rcutorture: Add basic ARM64 support to run scripts
rcutorture: Update kvm.sh header comment
rcutorture: Record which grace-period primitives are tested
rcutorture: Re-enable testing of dynamic expediting
rcutorture: Avoid fake-writer use of undefined primitives
rcutorture: Abstract function and module names
rcutorture: Replace multi-instance kzalloc() with kcalloc()
rcu: Remove SRCU throttling
srcu: Remove dead code in srcu_gp_end()
srcu: Reduce scans of srcu_data in counter wrap check
srcu: Prevent sdp->srcu_gp_seq_needed_exp counter wrap
srcu: Abstract function name
rcu: Make expedited RCU CPU selection avoid unnecessary stores
rcu: Trace expedited GP delays due to transitioning CPUs
...
syszbot reported the following debugobjects splat:
ODEBUG: object is on stack, but not annotated
WARNING: CPU: 0 PID: 4185 at lib/debugobjects.c:328
RIP: 0010:debug_object_is_on_stack lib/debugobjects.c:327 [inline]
debug_object_init+0x17/0x20 lib/debugobjects.c:391
debug_hrtimer_init kernel/time/hrtimer.c:410 [inline]
debug_init kernel/time/hrtimer.c:458 [inline]
hrtimer_init+0x8c/0x410 kernel/time/hrtimer.c:1259
alarm_init kernel/time/alarmtimer.c:339 [inline]
alarm_timer_nsleep+0x164/0x4d0 kernel/time/alarmtimer.c:787
SYSC_clock_nanosleep kernel/time/posix-timers.c:1226 [inline]
SyS_clock_nanosleep+0x235/0x330 kernel/time/posix-timers.c:1204
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
This happens because the hrtimer for the alarm nanosleep is on stack, but
the code does not use the proper debug objects initialization.
Split out the code for the allocated use cases and invoke
hrtimer_init_on_stack() for the nanosleep related functions.
Reported-by: syzbot+a3e0726462b2e346a31d@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: syzkaller-bugs@googlegroups.com
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1803261528270.1585@nanos.tec.linutronix.de
The clockid argument of clockid_to_kclock() comes straight from user space
via various syscalls and is used as index into the posix_clocks array.
Protect it against spectre v1 array out of bounds speculation. Remove the
redundant check for !posix_clock[id] as this is another source for
speculation and does not provide any advantage over the return
posix_clock[id] path which returns NULL in that case anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802151718320.1296@nanos.tec.linutronix.de
Dealing with 'struct timeval' users in the y2038 series is a bit tricky:
We have two definitions of timeval that are visible to user space,
one comes from glibc (or some other C library), the other comes from
linux/time.h. The kernel copy is what we want to be used for a number of
structures defined by the kernel itself, e.g. elf_prstatus (used it core
dumps), sysinfo and rusage (used in system calls). These generally tend
to be used for passing time intervals rather than absolute (epoch-based)
times, so they do not suffer from the y2038 overflow. Some of them
could be changed to use 64-bit timestamps by creating new system calls,
others like the core files cannot easily be changed.
An application using these interfaces likely also uses gettimeofday()
or other interfaces that use absolute times, and pass 'struct timeval'
pointers directly into kernel interfaces, so glibc must redefine their
timeval based on a 64-bit time_t when they introduce their y2038-safe
interfaces.
The only reasonable way forward I see is to remove the 'timeval'
definion from the kernel's uapi headers, and change the interfaces that
we do not want to (or cannot) duplicate for 64-bit times to use a new
__kernel_old_timeval definition instead. This type should be avoided
for all new interfaces (those can use 64-bit nanoseconds, or the 64-bit
version of timespec instead), and should be used with great care when
converting existing interfaces from timeval, to be sure they don't suffer
from the y2038 overflow, and only with consensus for the particular user
that using __kernel_old_timeval is better than moving to a 64-bit based
interface. The structure name is intentionally chosen to not conflict
with user space types, and to be ugly enough to discourage its use.
Note that ioctl based interfaces that pass a bare 'timeval' pointer
cannot change to '__kernel_old_timeval' because the user space source
code refers to 'timeval' instead, and we don't want to modify the user
space sources if possible. However, any application that relies on a
structure to contain an embedded 'timeval' (e.g. by passing a pointer
to the member into a function call that expects a timeval pointer) is
broken when that structure gets converted to __kernel_old_timeval. I
don't see any way around that, and we have to rely on the compiler to
produce a warning or compile failure that will alert users when they
recompile their sources against a new libc.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20180315161739.576085-1-arnd@arndb.de
Now that th MONOTONIC and BOOTTIME clocks are indentical remove all the special
casing.
The user space visible interfaces still support both clocks, but their behavior
is identical.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165150.410218515@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that the MONOTONIC and BOOTTIME clocks are indentical remove all the special
casing.
The user space visible interfaces still support both clocks, but their behavior
is identical.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165150.315745557@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that the MONOTONIC and BOOTTIME clocks are the same, remove all the
special handling from timekeeping. Keep wrappers for the existing users of
the *boot* timekeeper interfaces.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165150.236279497@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The MONOTONIC clock is not fast forwarded by the time spent in suspend on
resume. This is only done for the BOOTTIME clock. The reason why the
MONOTONIC clock is not forwarded is historical: the original Linux
implementation was using jiffies as a base for the MONOTONIC clock and
jiffies have never been advanced after resume.
At some point when timekeeping was unified in the core code, the
MONONOTIC clock was advanced after resume which also advanced jiffies causing
interesting side effects. As a consequence the the MONOTONIC clock forwarding
was disabled again and the BOOTTIME clock was introduced, which allows to read
time since boot.
Back then it was not possible to completely distangle the MONOTONIC clock and
jiffies because there were still interfaces which exposed the MONOTONIC clock
behaviour based on the timer wheel and therefore jiffies.
As of today none of the MONOTONIC clock facilities depends on jiffies
anymore so the forwarding can be done seperately. This is achieved by
forwarding the variables which are used for the jiffies update after resume
before the tick is restarted,
In timekeeping resume, the change is rather simple. Instead of updating the
offset between the MONOTONIC clock and the REALTIME/BOOTTIME clocks, advance the
time keeper base for the MONOTONIC and the MONOTONIC_RAW clocks by the time
spent in suspend.
The MONOTONIC clock is now the same as the BOOTTIME clock and the offset between
the REALTIME and the MONOTONIC clocks is the same as before suspend.
There might be side effects in applications, which rely on the
(unfortunately) well documented behaviour of the MONOTONIC clock, but the
downsides of the existing behaviour are probably worse.
There is one obvious issue. Up to now it was possible to retrieve the time
spent in suspend by observing the delta between the MONOTONIC clock and the
BOOTTIME clock. This is not longer available, but the previously introduced
mechanism to read the active non-suspended monotonic time can mitigate that
in a detectable fashion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165150.062975504@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The planned change to unify the behaviour of the MONOTONIC and BOOTTIME
clocks vs. suspend removes the ability to retrieve the active
non-suspended time of a system.
Provide a new CLOCK_MONOTONIC_ACTIVE clock which returns the active
non-suspended time of the system via clock_gettime().
This preserves the old behaviour of CLOCK_MONOTONIC before the
BOOTTIME/MONOTONIC unification.
This new clock also allows applications to detect programmatically that
the MONOTONIC and BOOTTIME clocks are identical.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165149.965235774@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RCU updates from Paul E. McKenney:
- Miscellaneous fixes, perhaps most notably removing obsolete
code whose only purpose in life was to gather information for
the now-removed RCU debugfs facility. Other notable changes
include removing NO_HZ_FULL_ALL in favor of the nohz_full kernel
boot parameter, minor optimizations for expedited grace periods,
some added tracing, creating an RCU-specific workqueue using Tejun's
new WQ_MEM_RECLAIM flag, and several cleanups to code and comments.
- SRCU cleanups and optimizations.
- Torture-test updates, perhaps most notably the adding of ARMv8
support, but also including numerous cleanups and usability fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the length of the NTP tick changes significantly, e.g. when an
NTP/PTP application is correcting the initial offset of the clock, a
large value may accumulate in the NTP error before the multiplier
converges to the correct value. It may then take a very long time (hours
or even days) before the error is corrected. This causes the clock to
have an unstable frequency offset, which has a negative impact on the
stability of synchronization with precise time sources (e.g. NTP/PTP
using hardware timestamping or the PTP KVM clock).
Use division to determine the correct multiplier directly from the NTP
tick length and replace the iterative approach. This removes the last
major source of the NTP error. The only remaining source is now limited
resolution of the multiplier, which is corrected by adding 1 to the
multiplier when the system clock is behind the NTP time.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1520620971-9567-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the timekeeping multiplier is changed, the NTP error is updated to
correct the clock for the delay between the tick and the update of the
clock. This error is corrected in later updates and the clock appears as
if the frequency was changed exactly on the tick.
Remove this correction to keep the point where the frequency is
effectively changed at the time of the update. This removes a major
source of the NTP error.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1520620971-9567-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The primary observation is that nohz enter/exit is always from the
current CPU, therefore NOHZ_TICK_STOPPED does not in fact need to be
an atomic.
Secondary is that we appear to have 2 nearly identical hooks in the
nohz enter code, set_cpu_sd_state_idle() and
nohz_balance_enter_idle(). Fold the whole set_cpu_sd_state thing into
nohz_balance_{enter,exit}_idle.
Removes an atomic op from both enter and exit paths.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a
live CPU. This happens from the control thread which initiated the unplug.
If the CPU on which the control thread runs came out from a longer idle
period then the base clock of that CPU might be stale because the control
thread runs prior to any event which forwards the clock.
In such a case the timers from the unplugged CPU are queued on the live CPU
based on the stale clock which can cause large delays due to increased
granularity of the outer timer wheels which are far away from base:;clock.
But there is a worse problem than that. The following sequence of events
illustrates it:
- CPU0 timer1 is queued expires = 59969 and base->clk = 59131.
The timer is queued at wheel level 2, with resulting expiry time = 60032
(due to level granularity).
- CPU1 enters idle @60007, with next timer expiry @60020.
- CPU0 is hotplugged at @60009
- CPU1 exits idle and runs the control thread which migrates the
timers from CPU0
timer1 is now queued in level 0 for immediate handling in the next
softirq because the requested expiry time 59969 is before CPU1 base->clk
60007
- CPU1 runs code which forwards the base clock which succeeds because the
next expiring timer. which was collected at idle entry time is still set
to 60020.
So it forwards beyond 60007 and therefore misses to expire the migrated
timer1. That timer gets expired when the wheel wraps around again, which
takes between 63 and 630ms depending on the HZ setting.
Address both problems by invoking forward_timer_base() for the control CPUs
timer base. All other places, which might run into a similar problem
(mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid
that.
[ tglx: Massaged comment and changelog ]
Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Co-developed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180118115022.6368-1-clingutla@codeaurora.org
Now that the 1Hz tick is offloaded to workqueues, we can safely remove
the residual code that used to handle it locally.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1519186649-3242-7-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This check is racy but provides a good heuristic to determine whether
a CPU may need a remote tick or not.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1519186649-3242-4-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It makes this function more self-explanatory about what it does and how
to use it.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1519186649-3242-3-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 6f1982fedd ("sched/isolation: Handle the nohz_full= parameter")
broke CONFIG_NO_HZ_FULL_ALL=y kernels. This breakage is due to the code
under CONFIG_NO_HZ_FULL_ALL failing to invoke the shiny new housekeeping
functions. This means that rcutorture scenario TREE04 now emits RCU CPU
stall warnings due to the RCU grace-period kthreads not being awakened
at a time of their choosing, or perhaps even not at all:
[ 27.731422] rcu_bh kthread starved for 21001 jiffies! g18446744073709551369 c18446744073709551368 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=3
[ 27.731423] rcu_bh I14936 9 2 0x80080000
[ 27.731435] Call Trace:
[ 27.731440] __schedule+0x31a/0x6d0
[ 27.731442] schedule+0x31/0x80
[ 27.731446] schedule_timeout+0x15a/0x320
[ 27.731453] ? call_timer_fn+0x130/0x130
[ 27.731457] rcu_gp_kthread+0x66c/0xea0
[ 27.731458] ? rcu_gp_kthread+0x66c/0xea0
Because no one has complained about CONFIG_NO_HZ_FULL_ALL=y being broken,
I hypothesize that no one is in fact using it, other than rcutorture.
This commit therefore eliminates CONFIG_NO_HZ_FULL_ALL and updates
rcutorture's config files to instead use the nohz_full= kernel parameter
to put the desired CPUs into nohz_full mode.
Fixes: 6f1982fedd ("sched/isolation: Handle the nohz_full= parameter")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hrtimer does not seem to use any of kallsyms functions/defines.
Link: http://lkml.kernel.org/r/20171208025616.16267-9-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
Pull siginfo cleanups from Eric Biederman:
"Long ago when 2.4 was just a testing release copy_siginfo_to_user was
made to copy individual fields to userspace, possibly for efficiency
and to ensure initialized values were not copied to userspace.
Unfortunately the design was complex, it's assumptions unstated, and
humans are fallible and so while it worked much of the time that
design failed to ensure unitialized memory is not copied to userspace.
This set of changes is part of a new design to clean up siginfo and
simplify things, and hopefully make the siginfo handling robust enough
that a simple inspection of the code can be made to ensure we don't
copy any unitializied fields to userspace.
The design is to unify struct siginfo and struct compat_siginfo into a
single definition that is shared between all architectures so that
anyone adding to the set of information shared with struct siginfo can
see the whole picture. Hopefully ensuring all future si_code
assignments are arch independent.
The design is to unify copy_siginfo_to_user32 and
copy_siginfo_from_user32 so that those function are complete and cope
with all of the different cases documented in signinfo_layout. I don't
think there was a single implementation of either of those functions
that was complete and correct before my changes unified them.
The design is to introduce a series of helpers including
force_siginfo_fault that take the values that are needed in struct
siginfo and build the siginfo structure for their callers. Ensuring
struct siginfo is built correctly.
The remaining work for 4.17 (unless someone thinks it is post -rc1
material) is to push usage of those helpers down into the
architectures so that architecture specific code will not need to deal
with the fiddly work of intializing struct siginfo, and then when
struct siginfo is guaranteed to be fully initialized change copy
siginfo_to_user into a simple wrapper around copy_to_user.
Further there is work in progress on the issues that have been
documented requires arch specific knowledge to sort out.
The changes below fix or at least document all of the issues that have
been found with siginfo generation. Then proceed to unify struct
siginfo the 32 bit helpers that copy siginfo to and from userspace,
and generally clean up anything that is not arch specific with regards
to siginfo generation.
It is a lot but with the unification you can of siginfo you can
already see the code reduction in the kernel"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits)
signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr
mm/memory_failure: Remove unused trapno from memory_failure
signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed
signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap
signal: Helpers for faults with specialized siginfo layouts
signal: Add send_sig_fault and force_sig_fault
signal: Replace memset(info,...) with clear_siginfo for clarity
signal: Don't use structure initializers for struct siginfo
signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered
ptrace: Use copy_siginfo in setsiginfo and getsiginfo
signal: Unify and correct copy_siginfo_to_user32
signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32
signal: Unify and correct copy_siginfo_from_user32
signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED
signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h
signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h
signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h
signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h
signal/powerpc: Remove redefinition of NSIGTRAP on powerpc
signal: Move addr_lsb into the _sigfault union for clarity
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Implement frequency/CPU invariance and OPP selection for
SCHED_DEADLINE (Juri Lelli)
- Tweak the task migration logic for better multi-tasking
workload scalability (Mel Gorman)
- Misc cleanups, fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Make bandwidth enforcement scale-invariant
sched/cpufreq: Move arch_scale_{freq,cpu}_capacity() outside of #ifdef CONFIG_SMP
sched/cpufreq: Remove arch_scale_freq_capacity()'s 'sd' parameter
sched/cpufreq: Always consider all CPUs when deciding next freq
sched/cpufreq: Split utilization signals
sched/cpufreq: Change the worker kthread to SCHED_DEADLINE
sched/deadline: Move CPU frequency selection triggering points
sched/cpufreq: Use the DEADLINE utilization signal
sched/deadline: Implement "runtime overrun signal" support
sched/fair: Only immediately migrate tasks due to interrupts if prev and target CPUs share cache
sched/fair: Correct obsolete comment about cpufreq_update_util()
sched/fair: Remove impossible condition from find_idlest_group_cpu()
sched/cpufreq: Don't pass flags to sugov_set_iowait_boost()
sched/cpufreq: Initialize sg_cpu->flags to 0
sched/fair: Consider RT/IRQ pressure in capacity_spare_wake()
sched/fair: Use 'unsigned long' for utilization, consistently
sched/core: Rework and clarify prepare_lock_switch()
sched/fair: Remove unused 'curr' parameter from wakeup_gran
sched/headers: Constify object_is_on_stack()
The hrtimer interrupt code contains a hang detection and mitigation
mechanism, which prevents that a long delayed hrtimer interrupt causes a
continous retriggering of interrupts which prevent the system from making
progress. If a hang is detected then the timer hardware is programmed with
a certain delay into the future and a flag is set in the hrtimer cpu base
which prevents newly enqueued timers from reprogramming the timer hardware
prior to the chosen delay. The subsequent hrtimer interrupt after the delay
clears the flag and resumes normal operation.
If such a hang happens in the last hrtimer interrupt before a CPU is
unplugged then the hang_detected flag is set and stays that way when the
CPU is plugged in again. At that point the timer hardware is not armed and
it cannot be armed because the hang_detected flag is still active, so
nothing clears that flag. As a consequence the CPU does not receive hrtimer
interrupts and no timers expire on that CPU which results in RCU stalls and
other malfunctions.
Clear the flag along with some other less critical members of the hrtimer
cpu base to ensure starting from a clean state when a CPU is plugged in.
Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the
root cause of that hard to reproduce heisenbug. Once understood it's
trivial and certainly justifies a brown paperbag.
Fixes: 41d2e49493 ("hrtimer: Tune hrtimer_interrupt hang logic")
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos
