Sync with exynos_defconfig and enable following options for Samsung
Exynos SoC based boards:
1. NFC_S3FWRN5_I2C (with NFC stack): Samsung S3FWRN5 NCI NFC Controller,
used for example on Exynos5433 (if booted in 32-bit mode),
2. S3C2410_WATCHDOG: watchdog driver used on S3C, S5P and Exynos SoCs,
3. REGULATOR_S2MPA01: Samsung S2MPA01 regulators driver present on
Exynos5260 RexNos REX-RED board,
4. SND_SOC_ARNDALE: sound support on Arndale boards,
5. EXYNOS_IOMMU: IOMMU driver used on all Exynos SocS,,
6. EXTCON_MAX14577, EXTCON_MAX77693 and EXTCON_MAX8997: extcon drivers
for handling micro USB on mobile Samsung boards (Trats, Trats2,
Rinato),
7. PHY_EXYNOS5250_SATA: SATA phy for Exynos5250 present on Arndale and
SMDK5250 boards.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
1. Enable AHCI platform driver on exynos defconfig for Exynos5250-based
Arndale board,
2. Make Max77802 PMIC regulator driver a built-in on multi_v7 defconfig
as it is essential early during boot.
-----BEGIN PGP SIGNATURE-----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=30RN
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.4
1. Enable AHCI platform driver on exynos defconfig for Exynos5250-based
Arndale board,
2. Make Max77802 PMIC regulator driver a built-in on multi_v7 defconfig
as it is essential early during boot.
* tag 'samsung-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Make MAX77802 regulator driver built-in
ARM: exynos_defconfig: Enable AHCI-platform SATA driver
Link: https://lore.kernel.org/r/20190904175002.10487-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Add DRM_MSM to ARCH_QCOM defconfigs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0xTo
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM Based defconfig Updates for v5.4
* Add DRM_MSM to ARCH_QCOM defconfigs
* tag 'qcom-defconfig-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: multi_v7_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM
ARM: qcom_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM
5.4, please pull the following:
- Nicolas enables the Raspberry Pi CPUFREQ driver in both
bcm2835_defconfig and multi_v7_defconfig
-----BEGIN PGP SIGNATURE-----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=dVMC
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.4/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig updates for
5.4, please pull the following:
- Nicolas enables the Raspberry Pi CPUFREQ driver in both
bcm2835_defconfig and multi_v7_defconfig
* tag 'arm-soc/for-5.4/defconfig' of https://github.com/Broadcom/stblinux:
ARM: defconfig: enable cpufreq driver for RPi
- Enable the new AST2600 in multi_v7 and the aspeed_g5 configs.
- Regenerate defconfigs to drop old options
- Clean up network options
-----BEGIN PGP SIGNATURE-----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=XO1W
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.4-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig
ASPEED defconfig updates for 5.4
- Enable the new AST2600 in multi_v7 and the aspeed_g5 configs.
- Regenerate defconfigs to drop old options
- Clean up network options
* tag 'aspeed-5.4-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: configs: aspeed_g5: Enable AST2600
ARM: configs: multi_v7: Add ASPEED G6
ARM: configs: aspeed: Refresh defconfigs
ARM: configs: aspeed: Enable commonly used network functionality
Link: https://lore.kernel.org/r/CACPK8XdyWzghA0QPDzA_MK5FYwhT5afqDJHNdhc8mfD2uk8MfQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Maxim 77802 PMIC is a main PMIC for the following Exynos5 based boards:
Odroid XU, Chromebook Pit and Chromebook Pi. Driver for its voltage
regulator is needed very early during boot to properly instantiate SD/MMC
devices and mount rootfs, so change that driver to be compiled-in.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all
ARCH_QCOM enabled defconfigs to restore the previous expected build
behavior.
I split this off from the original patch to make this change unique to
the multi_v7_defconfig
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
This adds the ASPEED AST2600 system and associated ASPEED devices so we
get build coverage.
The changes to the UART configuration to ensure the default console
(UART5) works.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This enables the driver for STM32 booster regulator found on stm32mp1.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This patch adds FMC2 NAND controller support used by STM32MP SOCs.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This enables on both multi_v7_defconfig and bcm2835_defconfig the new
firmware based clock and cpufreq drivers for the Raspberry Pi platform.
In the case of bcm2835_defconfig, as the cpufreq subsystem was disabled,
the conservative governor was selected as default since it better
handles the high frequency transition latency.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
1. Trim several configs with savedefconfig.
2. Enable Lima and Panfrost drivers for Mali GPU.
-----BEGIN PGP SIGNATURE-----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=WRDT
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.3
1. Trim several configs with savedefconfig.
2. Enable Lima and Panfrost drivers for Mali GPU.
* tag 'samsung-defconfig-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Enable Panfrost and Lima drivers
ARM: multi_v7_defconfig: Enable Panfrost and Lima drivers
ARM: defconfig: samsung: Cleanup with savedefconfig
ARM: exynos_defconfig: Trim and reorganize with savedefconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch enables support for STMFX pinctrl.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable support for Mali GPU with Panfrost and Lima drivers. Most of
Exynos chipsets come with Mali GPUs:
1. Mali 400 (Exynos3250, Exynos4210, Exynos4412),
2. Mali T628 (Exynos542x).
As Mali GPU is quite popular among ARM vendors, other platforms will
benefit as well.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
A bunch of armv7 boards can now use the Lima driver, let's enable it
in defconfig, it will be useful to have it enabled for KernelCI
boot and runtime testing.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
With the goal of making it easier for CI services such as KernelCI to
run tests for it.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Mostly the usual churn due to options being reordered or not added
in the right locations.
- Some various enabling of new drivers, etc.
... i.e. the usual updates, nothing particularly sticks out.
-----BEGIN PGP SIGNATURE-----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=IKfA
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Mostly the usual churn due to options being reordered or not added in
the right locations.
Some various enabling of new drivers, etc.
... i.e. the usual updates, nothing particularly sticks out"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
arm64: defconfig: Update UFSHCD for Hi3660 soc
ARM: multi_v7_defconfig: Enable support for STPMIC1
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks
arm64: defconfig: enable mv-xor driver
ARM: Enable Trusted Foundations for multiplatform ARM v7
ARM: tegra: Enable Trusted Foundations by default
ARM: tegra: Update default configuration for v5.1-rc1
ARM: multi_v7_defconfig: Update for moved options
ARM: multi_v7_defconfig: Update for dropped options
ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig
ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig
ARM: qcom_defconfig: add options for LG Nexus 5 phone
arm64: defconfig: include the Agilex platform to the arm64 defconfig
arm64: defconfig: Add PWM Fan support
arm64: defconfig: Enable Tegra HDA support
ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Refresh for v5.1-rc1
ARM: multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers
arm64: defconfig: enable fpga and service layer
...
SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to multiplatform enabled.
- Cleanups of Davinci
This tag also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release.
-----BEGIN PGP SIGNATURE-----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=pUeO
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to
multiplatform enabled.
- Cleanups of Davinci
This also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
ARM: debug-ll: add default address for digicolor
ARM: u300: regulator: add MODULE_LICENSE()
ARM: ep93xx: move private headers out of mach/*
ARM: ep93xx: move pinctrl interfaces into include/linux/soc
ARM: ep93xx: keypad: stop using mach/platform.h
ARM: ep93xx: move network platform data to separate header
ARM: stm32: add AMBA support for stm32 family
MAINTAINERS: update arch/arm/mach-davinci
ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
soc: ixp4xx: qmgr: Add DT probe code
soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
soc: ixp4xx: npe: Add DT probe code
soc: ixp4xx: Add DT bindings for IXP4xx NPE
soc: ixp4xx: qmgr: Pass resources
soc: ixp4xx: Remove unused functions
soc: ixp4xx: Uninline several functions
soc: ixp4xx: npe: Pass addresses as resources
ARM: ixp4xx: Turn the QMGR into a platform device
ARM: ixp4xx: Turn the NPE into a platform device
...
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAly/imcQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgQWfCACONa1ojh4GcDtHASYQgnabbBwM67bDX6Du
vnHj741X9nfyAd2cL1NC1ejTne0OVC9/5J1z7KkYiNejqk/7RzFDBM3yVPgxmv+z
xrpJ/O/3rRAJuiuM6dTxswMOVNm8YdR//bvXOkMqakgAWxlShp0rzDhVng4rEjjE
RsvNkeZm1cEy5owfmhIr6kKzT7k6edINgEUR3cJa3+yu0HplXYCIWhZUhIcDcGnK
Fqazr6K3h3i3/fhoTOC1I64LvjRVoN5/ivi9OoFAEfXVm+cIVq7XWoYKeFWt4ECW
+JwEdEH2RgY7kXIqUjcs2/pf+W4emtxTjL/CJwNraKgxYcPMhEpI
=NkpX
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rockchip-defconfig32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/defconfig
Enable more options needed by Veyron Chromebooks.
* tag 'v5.2-rockchip-defconfig32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks
Signed-off-by: Olof Johansson <olof@lixom.net>
shmobile and multi_v7 defconfigs
* Enable support for CFI NOR FLASH
shmobile defconfig
* Enable USB [EO]HCI HCD PLATFORM and PHY_RCAR_GEN3_USB2
* Refresh for v5.1-rc1
-----BEGIN PGP SIGNATURE-----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=53pJ
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig
Renesas ARM Based SoC Defconfig Updates for v5.2
shmobile and multi_v7 defconfigs
* Enable support for CFI NOR FLASH
shmobile defconfig
* Enable USB [EO]HCI HCD PLATFORM and PHY_RCAR_GEN3_USB2
* Refresh for v5.1-rc1
* tag 'renesas-arm-defconfig-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig
ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig
ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Refresh for v5.1-rc1
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable Trusted Foundations support in the default configurations for
Tegra and multi-v7. This is necessary because the symbol is no longer
selected by default.
-----BEGIN PGP SIGNATURE-----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=EcXx
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.2-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration updates for v5.2-rc1
Enable Trusted Foundations support in the default configurations for
Tegra and multi-v7. This is necessary because the symbol is no longer
selected by default.
* tag 'tegra-for-5.2-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: Enable Trusted Foundations for multiplatform ARM v7
ARM: tegra: Enable Trusted Foundations by default
ARM: tegra: Update default configuration for v5.1-rc1
Signed-off-by: Olof Johansson <olof@lixom.net>
This series of two patches first updates multi_v7_defconfig for
dropped options, and then updates it for moved options. We want to
do this on regular basis to make it easier to patch multi_v7_defconfig
without introducing errors and merge conflicts. We update the defconfig
in two patches to make sure we're not accidentally losing any needed
options.
After this, updating multi_v7_defconfig will become trivial, and most
likely only a small follow-up patches are needed after the merge window
to update it again for moved options.
-----BEGIN PGP SIGNATURE-----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=c2Tr
-----END PGP SIGNATURE-----
Merge tag 'multi-v7-defconfig-for-v5.2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Update multi_v7_defconfig for dropped and moved options
This series of two patches first updates multi_v7_defconfig for
dropped options, and then updates it for moved options. We want to
do this on regular basis to make it easier to patch multi_v7_defconfig
without introducing errors and merge conflicts. We update the defconfig
in two patches to make sure we're not accidentally losing any needed
options.
After this, updating multi_v7_defconfig will become trivial, and most
likely only a small follow-up patches are needed after the merge window
to update it again for moved options.
* tag 'multi-v7-defconfig-for-v5.2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Update for moved options
ARM: multi_v7_defconfig: Update for dropped options
Signed-off-by: Olof Johansson <olof@lixom.net>
STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable following drivers for merged devices:
- Batteries with BQ27XXX chips for Minnie boards.
- Elan eKTH I2C touchscreen for Minnie boards.
- GPIO charger for all Veyron boards.
- Rockchip SARADC driver for all rk3288 boards.
- Rockchip eFUSE driver for all rk3288 boards.
- TPM security chip for all Veyron boards.
- ChromeOS EC userspace interface for all chromebooks boards.
- ChromeOS EC light and proximity sensors for some chromebooks.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
MTD_NAND is large and encloses much more than what the symbol is
actually used for: raw NAND. Clarify the symbol by naming it
MTD_RAW_NAND instead.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Some 32-bit Tegra devices supported by the multiplatform ARM v7 default
configuration ship with the Trusted Foundations firmware. Enable support
for it by default.
Signed-off-by: Thierry Reding <treding@nvidia.com>
These options have just moved around, let's update with make
savedefconfig to make patching the file easier.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Olof Johansson <olof@lixom.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tony Lindgren <tony@atomide.com>
These are mostly automatically selected with make multi_v7_defconfig,
except for SH_DMAE which is selected only by sound/soc/sh/Kconfig.
Then CONFIG_SND_SIMPLE_SCU_CARD no longer exists at all.
And CONFIG_SOC_CAMERA and CONFIG_SOC_CAMERA_PLATFORM are tagged
to depend on BROKEN, so we can drop them.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Olof Johansson <olof@lixom.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Support for Exynos5420/5422/5800 SoCs requires MCPM to properly boot all
CPU cores on all currectly supported platforms: Peach Pit (Exynos5420),
Odroid XU3/XU3lite/XU4/HC1 (Exynos5422) and Peach Pi (Exynos5800).
Without it some CPU cores fail to come online. Remove then the ability to
disable MCPM and make it mandatory when Exynos542x/5800 support is
enabled.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable the config options needed to access the CFI NOR FLASH on the
APE6EVM board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
With the SAR ADC driver ADC measurements can be taken though the IIO
framework. Additionally the SAR ADC has a channel which is connected to
an internal temperature sensor. The calibration data for this internal
temperature sensor is stored in the eFuse.
Enable the SAR ADC driver and the eFuse driver for the 32-bit Amlogic
Meson SoCs so we can expose the chip temperature to userspace through
the IIO hwmon driver (whose config option is already enabled:
CONFIG_SENSORS_IIO_HWMON=y).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Two new SoC families are added this time.
Sugaya Taichi submitted support for the Milbeaut SoC family from
Socionext and explains:
"SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
computer vision. It also features advanced functionalities such as 360-degree,
real-time spherical stitching with multi cameras, image stabilization for
without mechanical gimbals, and rolling shutter correction. More detail is
below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"
Interestingly, this one has a history dating back to older chips
made by Socionext and previously Matsushita/Panasonic based on their
own mn10300 CPU architecture that was removed from the kernel last year.
Manivannan Sadhasivam adds support for another SoC family, this is the
Bitmain BM1880 chip used in the Sophon Edge TPU developer board.
The chip is intended for Deep Learning applications, and comes
with dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
microcontroller core to control the tensor unit.
For the moment, the TPU is not accessible in mainline Linux, so
we treat it as a generic Arm SoC.
More information is available at https://www.sophon.ai/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=HQS8
-----END PGP SIGNATURE-----
Merge tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC family support from Arnd Bergmann:
"Two new SoC families are added this time.
Sugaya Taichi submitted support for the Milbeaut SoC family from
Socionext and explains:
"SC2000 is a SoC of the Milbeaut series. equipped with a DSP
optimized for computer vision. It also features advanced
functionalities such as 360-degree, real-time spherical stitching
with multi cameras, image stabilization for without mechanical
gimbals, and rolling shutter correction. More detail is below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"
Interestingly, this one has a history dating back to older chips made
by Socionext and previously Matsushita/Panasonic based on their own
mn10300 CPU architecture that was removed from the kernel last year.
Manivannan Sadhasivam adds support for another SoC family, this is the
Bitmain BM1880 chip used in the Sophon Edge TPU developer board.
The chip is intended for Deep Learning applications, and comes with
dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
microcontroller core to control the tensor unit. For the moment, the
TPU is not accessible in mainline Linux, so we treat it as a generic
Arm SoC.
More information is available at
https://www.sophon.ai/"
* tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
ARM: configs: Add Milbeaut M10V defconfig
ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
dt-bindings: timer: Add Milbeaut M10V timer description
ARM: milbeaut: Add basic support for Milbeaut m10v SoC
dt-bindings: Add documentation for Milbeaut SoCs
dt-bindings: arm: Add SMP enable-method for Milbeaut
dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
MAINTAINERS: Add entry for Bitmain SoC platform
arm64: dts: bitmain: Add Sophon Egde board support
arm64: dts: bitmain: Add BM1880 SoC support
arm64: Add ARCH_BITMAIN platform
dt-bindings: arm: Document Bitmain BM1880 SoC
Add and enable the Milbeaut M10V architecture. These configs select those
of the clock, timer and serial driver for M10V.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
shmobile and multi_v7 defconfig
* Enable support for recently upstreamed RZ/A2 (r7s9210) SoC
* Enable NXP pcf85363 RTC which is used on RZ/G1C (r8a77470) based iWave SBC
shmobile defconfig
* Refresh for changes present in v5.0-rc1
-----BEGIN PGP SIGNATURE-----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=8/bA
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig
Renesas ARM Based SoC Defconfig Updates for v5.1
shmobile and multi_v7 defconfig
* Enable support for recently upstreamed RZ/A2 (r7s9210) SoC
* Enable NXP pcf85363 RTC which is used on RZ/G1C (r8a77470) based iWave SBC
shmobile defconfig
* Refresh for changes present in v5.0-rc1
* tag 'renesas-arm-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable support for RZ/A2
ARM: shmobile: defconfig: Enable support for RZ/A2
ARM: shmobile: defconfig: Refresh for v5.0-rc1
ARM: multi_v7_defconfig: Enable NXP pcf85363 rtc
ARM: shmobile: Enable NXP pcf85363 rtc in shmobile_defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the base GCC plugin support symbol CONFIG_GCC_PLUGINS for
multi_v7_defconfig so that builds hosted on systems that have a
supported version of GCC along with the prerequisite headers will
allow GCC plugins to be used during the build. At the moment, this
will also enable the ARM per-task stack protector plugin, since
all its remaining Kconfig dependencies are fulfilled by default.
At the same time, enable the structleak plugin. This plugin ensures
that local struct type variables are fully initialized, preventing
inadvertent leaks of kernel state if such variables are shared with
userland. This is a reasonable transformation to apply by default,
since it does not adversely affect performance, and does not affect
GCC compiler diagnostics regarding the use of uninitialized local
variables.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This switches the ARMv7 defconfig away from the old
fbdev driver to the new DRM driver. All machines are
now supported by the new driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable support for the RZ/A2 SoC, including pin control, now the DTS for
the Renesas RZ/A2M evaluation board is included.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The iWave RZ/G1C SBC supports RTC (NXP pcf85263). To increase
hardware support enable the driver in the multi_v7_defconfig
multiplatform configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a build
fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante
GPU, 256MB RAM, Wifi). This includes some acked platform-specific
drivers (serial, etc). This also include DTs for two boards with this
SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs.
-----BEGIN PGP SIGNATURE-----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=qgZw
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull more ARM SoC updates from Olof Johansson:
"A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a
build fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
Vivante GPU, 256MB RAM, Wifi). This includes some acked
platform-specific drivers (serial, etc). This also include DTs for
two boards with this SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
arm64: defconfig: Re-enable bcm2835-thermal driver
MAINTAINERS: Add entry for RDA Micro SoC architecture
tty: serial: Add RDA8810PL UART driver
ARM: dts: rda8810pl: Add interrupt support for UART
dt-bindings: serial: Document RDA Micro UART
ARM: dts: rda8810pl: Add timer support
ARM: dts: Add devicetree for OrangePi i96 board
ARM: dts: Add devicetree for OrangePi 2G IoT board
ARM: dts: Add devicetree for RDA8810PL SoC
ARM: Prepare RDA8810PL SoC
dt-bindings: arm: Document RDA8810PL and reference boards
dt-bindings: Add RDA Micro vendor prefix
ARM: sti: remove pen_release and boot_lock
arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
arm64: dts: imx8mq-evk: enable watchdog
arm64: dts: imx8mq: add watchdog devices
MAINTAINERS: add i.MX8 DT path to i.MX architecture
arm64: add support for i.MX8M EVK board
arm64: add basic DTS for i.MX8MQ
...
Enable the UniPhier MIO DMAC driver. This is used as the DMA engine
for accelerating the SD/eMMC controller drivers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add DRM bridge driver for TOSHIBA TC358764 chip used in LCD panel
for Samsung Exynos5250-based Arndale board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add regulator driver for MAX8952 PMIC chip used on Samsung UniversalC210
board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This enables drivers for STM32 timer, low power timer and analog hardware
that can be used on STM32MP1 SoC:
- Timer & LP Timer MFD core, PWM, trigger & encoder drivers
- IIO ADC/DAC/DFSDM
- vrefbuf regu driver (voltage reference buffer).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
We're finally changing omaps to use 8250_OMAP instead of SERIAL_OMAP
for multi_v7_defconfig. This will make things much easier for distros,
and the kernel already warns about the kernel console getting
redirected with CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP defaulting to y.
People using /etc/inittab still need to s/ttyO/ttyS/ if using the
out-of-box multi_v7_defconfig, and that did not seem to be an issue
when we moved omap2plus_defconfig to use 8250_OMAP earlier.
The other change is to enable CONFIG_SND_SOC_TLV320AIC23_I2C as a
loadable module that I forgot to send a pull request for earlier.
-----BEGIN PGP SIGNATURE-----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=rfKY
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.21/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Defconfig changes for omaps for v4.21 merge window
We're finally changing omaps to use 8250_OMAP instead of SERIAL_OMAP
for multi_v7_defconfig. This will make things much easier for distros,
and the kernel already warns about the kernel console getting
redirected with CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP defaulting to y.
People using /etc/inittab still need to s/ttyO/ttyS/ if using the
out-of-box multi_v7_defconfig, and that did not seem to be an issue
when we moved omap2plus_defconfig to use 8250_OMAP earlier.
The other change is to enable CONFIG_SND_SOC_TLV320AIC23_I2C as a
loadable module that I forgot to send a pull request for earlier.
* tag 'omap-for-v4.21/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default
ARM: omap2plus_defconfig: Add tlv320aic23 as module
Signed-off-by: Olof Johansson <olof@lixom.net>
We've already moved omap2plus_defconfig over to use 8250-omap instead of
omap-serial driver. Let's update multi_v7_defconfig too.
By default we also enable SERIAL_8250_OMAP_TTYO_FIXUP that updates the
kernel serial console to point to 8250 driver and warns about it during
the boot.
Users with ttyO[0123] in their /etc/inittab should update inittab to
to use ttyS[0123] instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>
I should have let this soak for a while in linux-next, since we have at
least one board that hit a regression from it. Revert from 4.20-rc, and
we'll queue it for next merge window once regression is fixed.
This reverts commit 513eb98595.
Signed-off-by: Olof Johansson <olof@lixom.net>
Using CONFIG_PREEMPT as preemption model for ARMv7 systems
appear to be the most reasonable default.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
