mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 07:15:03 +07:00
Merge branch 'mlxsw-core-extend-qsfp-eeprom-size'
Ido Schimmel says: ==================== Vadim says: This patch set extends the size of QSFP EEPROM for the cable types SSF-8436 and SFF-8636 from 256 bytes to 640 bytes. This allows ethtool to show correct information for these cable types (more details below). Patch #1 adds a macro that computes the EEPROM page number from the provided offset specified in the request. Patch #2 teaches the driver to access the information stored in the upper pages of the QSFP memory map. Details and examples: SFF-8436 specification defines pages 0, 1, 2 and 3. Page 0 contains lower memory page offsets (from 0x00 to 0x7f) and upper page offsets (from 0x80 to 0xfe). Upper pages 1, 2 and 3 are optional and can be empty. Page 1 is provided if upper page 0 byte 0xc3 bit 6 is set. Page 2 is provided if upper page 0 byte 0xc3 bit 7 is set. Page 3 is provided if lower page 0 byte 0x02 bit 2 is cleared. Offset 0xc3 for the upper page is provided as 0x43 = 0xc3 - 0x80. As a result of exposing 256 bytes only, ethtool shows wrong information for pages 1, 2 and 3. In the below hex dump from ethtool for a cable compliant to SFF-8636 specification, it can be seen that EEPROM of this device contains optical diagnostic page (lower page 0 byte 0x02 bit 2 is cleared), but it is not exposed, as the length defined for this type is 256 bytes. $ ethtool -m sfp42 hex on Offset Values ------ ------ 0x0000: 11 07 00 ff 00 ff 00 00 00 55 55 00 00 00 00 00 0x0010: 00 00 00 00 00 00 2a 90 00 00 82 ae 00 00 00 00 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 0x0060: 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0080: 11 8c 0c 80 00 00 00 00 00 00 00 05 ff 00 00 23 0x0090: 00 00 32 00 4d 65 6c 6c 61 6e 6f 78 20 20 20 20 0x00a0: 20 20 20 20 00 00 02 c9 4d 4d 41 31 42 30 30 2d 0x00b0: 53 53 31 20 20 20 20 20 41 32 42 68 0b b8 46 05 0x00c0: 02 07 f5 9e 4d 54 31 38 33 34 46 54 30 33 38 34 0x00d0: 36 20 20 20 31 38 30 37 30 33 00 00 0c 10 67 c2 0x00e0: 38 32 36 46 4d 41 32 32 36 49 30 31 31 35 20 20 0x00f0: 00 00 00 00 00 00 00 00 00 00 01 00 0e 00 00 00 After changing the length returned by get_module_info() callback from 256 bytes to 640 bytes, the upper pages 1, 2 and 3 are exposed by ethtool. In the below hex dump from the same cable it can be seen that the optical diagnostic page (page 3, from offset 0x0200) has non-zero data. $ ethtool -m sfp42 hex on Offset Values ------ ------ 0x0000: 11 07 00 ff 00 ff 00 00 00 55 55 00 00 00 00 00 0x0010: 00 00 00 00 00 00 27 79 00 00 82 c5 00 00 00 00 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 0x0060: 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0080: 11 8c 0c 80 00 00 00 00 00 00 00 05 ff 00 00 23 0x0090: 00 00 32 00 4d 65 6c 6c 61 6e 6f 78 20 20 20 20 0x00a0: 20 20 20 20 00 00 02 c9 4d 4d 41 31 42 30 30 2d 0x00b0: 53 53 31 20 20 20 20 20 41 32 42 68 0b b8 46 05 0x00c0: 02 07 f5 9e 4d 54 31 38 33 34 46 54 30 33 38 34 0x00d0: 36 20 20 20 31 38 30 37 30 33 00 00 0c 10 67 c2 0x00e0: 38 32 36 46 4d 41 32 32 36 49 30 31 31 35 20 20 0x00f0: 00 00 00 00 00 00 00 00 00 00 01 00 0e 00 00 00 0x0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x01a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x01b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x01c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x01d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x01e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x01f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0200: 50 00 f6 00 46 00 00 00 00 00 00 00 00 00 00 00 0x0210: 88 b8 79 18 87 5a 7a 76 00 00 00 00 00 00 00 00 0x0220: 00 00 00 00 00 00 00 00 00 00 18 30 0e 61 60 b7 0x0230: 87 71 01 d3 43 e2 03 a5 10 9a 0a ba 0f a0 0b b8 0x0240: 87 71 02 d4 43 e2 05 a5 00 00 00 00 00 00 00 00 0x0250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0260: a7 03 00 00 00 00 00 00 00 00 44 44 22 22 11 11 0x0270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 And 'ethtool -m sfp42' shows the real values for the below fields, while before it exposed zeros for these fields: Laser bias current high alarm threshold : 8.500 mA Laser bias current low alarm threshold : 5.492 mA Laser bias current high warning threshold : 8.000 mA Laser bias current low warning threshold : 6.000 mA Laser output power high alarm threshold : 3.4673 mW / 5.40 dBm Laser output power low alarm threshold : 0.0724 mW / -11.40 dBm Laser output power high warning threshold : 1.7378 mW / 2.40 dBm Laser output power low warning threshold : 0.1445 mW / -8.40 dBm Module temperature high alarm threshold : 80.00 degrees C / 176.00 F Module temperature low alarm threshold : -10.00 degrees C / 14.00 F Module temperature high warning threshold : 70.00 degrees C / 158.00 F Module temperature low warning threshold : 0.00 degrees C / 32.00 F Module voltage high alarm threshold : 3.5000 V Module voltage low alarm threshold : 3.1000 V ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
This commit is contained in:
Jakub Kicinski
commit
fe28afe23e
@ -50,6 +50,7 @@ mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core, int module,
|
||||
char eeprom_tmp[MLXSW_REG_MCIA_EEPROM_SIZE];
|
||||
char mcia_pl[MLXSW_REG_MCIA_LEN];
|
||||
u16 i2c_addr;
|
||||
u8 page = 0;
|
||||
int status;
|
||||
int err;
|
||||
|
||||
@ -62,11 +63,21 @@ mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core, int module,
|
||||
|
||||
i2c_addr = MLXSW_REG_MCIA_I2C_ADDR_LOW;
|
||||
if (offset >= MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) {
|
||||
i2c_addr = MLXSW_REG_MCIA_I2C_ADDR_HIGH;
|
||||
offset -= MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH;
|
||||
page = MLXSW_REG_MCIA_PAGE_GET(offset);
|
||||
offset -= MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH * page;
|
||||
/* When reading upper pages 1, 2 and 3 the offset starts at
|
||||
* 128. Please refer to "QSFP+ Memory Map" figure in SFF-8436
|
||||
* specification for graphical depiction.
|
||||
* MCIA register accepts buffer size <= 48. Page of size 128
|
||||
* should be read by chunks of size 48, 48, 32. Align the size
|
||||
* of the last chunk to avoid reading after the end of the
|
||||
* page.
|
||||
*/
|
||||
if (offset + size > MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH)
|
||||
size = MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH - offset;
|
||||
}
|
||||
|
||||
mlxsw_reg_mcia_pack(mcia_pl, module, 0, 0, offset, size, i2c_addr);
|
||||
mlxsw_reg_mcia_pack(mcia_pl, module, 0, page, offset, size, i2c_addr);
|
||||
|
||||
err = mlxsw_reg_query(mlxsw_core, MLXSW_REG(mcia), mcia_pl);
|
||||
if (err)
|
||||
@ -168,7 +179,7 @@ int mlxsw_env_get_module_info(struct mlxsw_core *mlxsw_core, int module,
|
||||
switch (module_id) {
|
||||
case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP:
|
||||
modinfo->type = ETH_MODULE_SFF_8436;
|
||||
modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
|
||||
modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
|
||||
break;
|
||||
case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP_PLUS: /* fall-through */
|
||||
case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP28:
|
||||
@ -176,10 +187,10 @@ int mlxsw_env_get_module_info(struct mlxsw_core *mlxsw_core, int module,
|
||||
module_rev_id >=
|
||||
MLXSW_REG_MCIA_EEPROM_MODULE_INFO_REV_ID_8636) {
|
||||
modinfo->type = ETH_MODULE_SFF_8636;
|
||||
modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
|
||||
modinfo->eeprom_len = ETH_MODULE_SFF_8636_MAX_LEN;
|
||||
} else {
|
||||
modinfo->type = ETH_MODULE_SFF_8436;
|
||||
modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
|
||||
modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
|
||||
}
|
||||
break;
|
||||
case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_SFP:
|
||||
|
||||
@ -8412,6 +8412,7 @@ MLXSW_ITEM32(reg, mcia, device_address, 0x04, 0, 16);
|
||||
MLXSW_ITEM32(reg, mcia, size, 0x08, 0, 16);
|
||||
|
||||
#define MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH 256
|
||||
#define MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH 128
|
||||
#define MLXSW_REG_MCIA_EEPROM_SIZE 48
|
||||
#define MLXSW_REG_MCIA_I2C_ADDR_LOW 0x50
|
||||
#define MLXSW_REG_MCIA_I2C_ADDR_HIGH 0x51
|
||||
@ -8447,6 +8448,14 @@ enum mlxsw_reg_mcia_eeprom_module_info {
|
||||
*/
|
||||
MLXSW_ITEM_BUF(reg, mcia, eeprom, 0x10, MLXSW_REG_MCIA_EEPROM_SIZE);
|
||||
|
||||
/* This is used to access the optional upper pages (1-3) in the QSFP+
|
||||
* memory map. Page 1 is available on offset 256 through 383, page 2 -
|
||||
* on offset 384 through 511, page 3 - on offset 512 through 639.
|
||||
*/
|
||||
#define MLXSW_REG_MCIA_PAGE_GET(off) (((off) - \
|
||||
MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) / \
|
||||
MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH + 1)
|
||||
|
||||
static inline void mlxsw_reg_mcia_pack(char *payload, u8 module, u8 lock,
|
||||
u8 page_number, u16 device_addr,
|
||||
u8 size, u8 i2c_device_addr)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user