diff --git a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt new file mode 100644 index 000000000000..882455e9b36d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt @@ -0,0 +1,16 @@ +SKY81452 voltage regulator + +Required properties: +- any required generic properties defined in regulator.txt + +Optional properties: +- any available generic properties defined in regulator.txt + +Example: + + regulator { + /* generic regulator properties */ + regulator-name = "touch_en"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <8000000>; + }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index c3ca05cb5c87..72fb9500f410 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -502,6 +502,17 @@ config REGULATOR_S5M8767 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and supports DVS mode with 8bits of output voltage control. +config REGULATOR_SKY81452 + tristate "Skyworks Solutions SKY81452 voltage regulator" + depends on SKY81452 + help + This driver supports Skyworks SKY81452 voltage output regulator + via I2C bus. SKY81452 has one voltage linear regulator can be + programmed from 4.5V to 20V. + + This driver can also be built as a module. If so, the module + will be called sky81452-regulator. + config REGULATOR_TI_ABB tristate "TI Adaptive Body Bias on-chip LDO" depends on ARCH_OMAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 2f49356e03a7..a4d81ec024ea 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -67,6 +67,7 @@ obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o +obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o diff --git a/drivers/regulator/sky81452-regulator.c b/drivers/regulator/sky81452-regulator.c new file mode 100644 index 000000000000..97aff0ccd65f --- /dev/null +++ b/drivers/regulator/sky81452-regulator.c @@ -0,0 +1,130 @@ +/* + * sky81452-regulator.c SKY81452 regulator driver + * + * Copyright 2014 Skyworks Solutions Inc. + * Author : Gyungoh Yoo + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* registers */ +#define SKY81452_REG1 0x01 +#define SKY81452_REG3 0x03 + +/* bit mask */ +#define SKY81452_LEN 0x40 +#define SKY81452_LOUT 0x1F + +static struct regulator_ops sky81452_reg_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_linear_range sky81452_reg_ranges[] = { + REGULATOR_LINEAR_RANGE(4500000, 0, 14, 250000), + REGULATOR_LINEAR_RANGE(9000000, 15, 31, 1000000), +}; + +static const struct regulator_desc sky81452_reg = { + .name = "LOUT", + .ops = &sky81452_reg_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = SKY81452_LOUT + 1, + .linear_ranges = sky81452_reg_ranges, + .n_linear_ranges = ARRAY_SIZE(sky81452_reg_ranges), + .vsel_reg = SKY81452_REG3, + .vsel_mask = SKY81452_LOUT, + .enable_reg = SKY81452_REG1, + .enable_mask = SKY81452_LEN, +}; + +#ifdef CONFIG_OF +static struct regulator_init_data *sky81452_reg_parse_dt(struct device *dev) +{ + struct regulator_init_data *init_data; + struct device_node *np; + + np = of_get_child_by_name(dev->parent->of_node, "regulator"); + if (unlikely(!np)) { + dev_err(dev, "regulator node not found"); + return NULL; + } + + init_data = of_get_regulator_init_data(dev, np); + + of_node_put(np); + return init_data; +} +#else +static struct regulator_init_data *sky81452_reg_parse_dt(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} +#endif + +static int sky81452_reg_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct regulator_init_data *init_data = dev_get_platdata(dev); + struct regulator_config config = { }; + struct regulator_dev *rdev; + + if (!init_data) { + init_data = sky81452_reg_parse_dt(dev); + if (IS_ERR(init_data)) + return PTR_ERR(init_data); + } + + config.dev = dev; + config.init_data = init_data; + config.of_node = dev->of_node; + config.regmap = dev_get_drvdata(dev->parent); + + rdev = devm_regulator_register(dev, &sky81452_reg, &config); + if (IS_ERR(rdev)) + return PTR_ERR(rdev); + + platform_set_drvdata(pdev, rdev); + + return 0; +} + +static struct platform_driver sky81452_reg_driver = { + .driver = { + .name = "sky81452-regulator", + }, + .probe = sky81452_reg_probe, +}; + +module_platform_driver(sky81452_reg_driver); + +MODULE_DESCRIPTION("Skyworks SKY81452 Regulator driver"); +MODULE_AUTHOR("Gyungoh Yoo "); +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.0");