Merge branch 'linus' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2024-11-25 04:10:51 +07:00 · 2017-06-22 10:19:14 +02:00 · 2017-06-22 10:19:14 +02:00 · f9e1698831
commit f9e1698831
parent cde50a6739 8d829b9bb8
776 changed files with 7207 additions and 4728 deletions
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@ -866,6 +866,15 @@

 	dscc4.setup=	[NET]

+	dt_cpu_ftrs=	[PPC]
+			Format: {"off" | "known"}
+			Control how the dt_cpu_ftrs device-tree binding is
+			used for CPU feature discovery and setup (if it
+			exists).
+			off: Do not use it, fall back to legacy cpu table.
+			known: Do not pass through unknown features to guests
+			or userspace, only those that the kernel is aware of.
+
 	dump_apple_properties	[X86]
 			Dump name and content of EFI device properties on
 			x86 Macs.  Useful for driver authors to determine
@ -3802,6 +3811,13 @@
 			expediting.  Set to zero to disable automatic
 			expediting.

+	stack_guard_gap=	[MM]
+			override the default stack gap protection. The value
+			is in page units and it defines how many pages prior
+			to (for stacks growing down) resp. after (for stacks
+			growing up) the main stack are reserved for no other
+			mapping. Default value is 256 pages.
+
 	stacktrace	[FTRACE]
 			Enabled the stack tracer on boot up.

--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@ -22,7 +22,8 @@ Required properties :
 - #clock-cells : must contain 1
 - #reset-cells : must contain 1

-For the PRCM CCUs on H3/A64, one more clock is needed:
+For the PRCM CCUs on H3/A64, two more clocks are needed:
+- "pll-periph": the SoC's peripheral PLL from the main CCU
 - "iosc": the SoC's internal frequency oscillator

 Example for generic CCU:
@ -39,8 +40,8 @@ Example for PRCM CCU:
 r_ccu: clock@01f01400 {
 	compatible = "allwinner,sun50i-a64-r-ccu";
 	reg = <0x01f01400 0x100>;
-	clocks = <&osc24M>, <&osc32k>, <&iosc>;
-	clock-names = "hosc", "losc", "iosc";
+	clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>;
+	clock-names = "hosc", "losc", "iosc", "pll-periph";
 	#clock-cells = <1>;
 	#reset-cells = <1>;
 };
--- a/Documentation/devicetree/bindings/net/dsa/b53.txt
+++ b/Documentation/devicetree/bindings/net/dsa/b53.txt
@ -34,7 +34,7 @@ Required properties:
      "brcm,bcm6328-switch"
      "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"

-See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required and optional properties.

 Examples:
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@ -26,6 +26,10 @@ Optional properties:
 - interrupt-controller	: Indicates the switch is itself an interrupt
 			  controller. This is used for the PHY interrupts.
 #interrupt-cells = <2>	: Controller uses two cells, number and flag
+- eeprom-length		: Set to the length of an EEPROM connected to the
+			  switch. Must be set if the switch can not detect
+			  the presence and/or size of a connected EEPROM,
+			  otherwise optional.
 - mdio			: Container of PHY and devices on the switches MDIO
 			  bus.
 - mdio?		: Container of PHYs and devices on the external MDIO
--- a/Documentation/devicetree/bindings/net/smsc911x.txt
+++ b/Documentation/devicetree/bindings/net/smsc911x.txt
@ -27,6 +27,7 @@ Optional properties:
  of the device. On many systems this is wired high so the device goes
  out of reset at power-on, but if it is under program control, this
  optional GPIO can wake up in response to it.
+- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies

 Examples:

--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@ -10,6 +10,7 @@ Required properties:
  - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
  - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
  - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
+  - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
  - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
  - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
  - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
--- a/Documentation/networking/dpaa.txt
+++ b/Documentation/networking/dpaa.txt
@ -0,0 +1,194 @@
+The QorIQ DPAA Ethernet Driver
+==============================
+
+Authors:
+Madalin Bucur <madalin.bucur@nxp.com>
+Camelia Groza <camelia.groza@nxp.com>
+
+Contents
+========
+
+	- DPAA Ethernet Overview
+	- DPAA Ethernet Supported SoCs
+	- Configuring DPAA Ethernet in your kernel
+	- DPAA Ethernet Frame Processing
+	- DPAA Ethernet Features
+	- Debugging
+
+DPAA Ethernet Overview
+======================
+
+DPAA stands for Data Path Acceleration Architecture and it is a
+set of networking acceleration IPs that are available on several
+generations of SoCs, both on PowerPC and ARM64.
+
+The Freescale DPAA architecture consists of a series of hardware blocks
+that support Ethernet connectivity. The Ethernet driver depends upon the
+following drivers in the Linux kernel:
+
+ - Peripheral Access Memory Unit (PAMU) (* needed only for PPC platforms)
+    drivers/iommu/fsl_*
+ - Frame Manager (FMan)
+    drivers/net/ethernet/freescale/fman
+ - Queue Manager (QMan), Buffer Manager (BMan)
+    drivers/soc/fsl/qbman
+
+A simplified view of the dpaa_eth interfaces mapped to FMan MACs:
+
+  dpaa_eth       /eth0\     ...       /ethN\
+  driver        |      |             |      |
+  -------------   ----   -----------   ----   -------------
+       -Ports  / Tx  Rx \    ...    / Tx  Rx \
+  FMan        |          |         |          |
+       -MACs  |   MAC0   |         |   MACN   |
+             /   dtsec0   \  ...  /   dtsecN   \ (or tgec)
+            /              \     /              \(or memac)
+  ---------  --------------  ---  --------------  ---------
+      FMan, FMan Port, FMan SP, FMan MURAM drivers
+  ---------------------------------------------------------
+      FMan HW blocks: MURAM, MACs, Ports, SP
+  ---------------------------------------------------------
+
+The dpaa_eth relation to the QMan, BMan and FMan:
+              ________________________________
+  dpaa_eth   /            eth0                \
+  driver    /                                  \
+  ---------   -^-   -^-   -^-   ---    ---------
+  QMan driver / \   / \   / \  \   /  | BMan    |
+             |Rx | |Rx | |Tx | |Tx |  | driver  |
+  ---------  |Dfl| |Err| |Cnf| |FQs|  |         |
+  QMan HW    |FQ | |FQ | |FQs| |   |  |         |
+             /   \ /   \ /   \  \ /   |         |
+  ---------   ---   ---   ---   -v-    ---------
+            |        FMan QMI         |         |
+            | FMan HW       FMan BMI  | BMan HW |
+              -----------------------   --------
+
+where the acronyms used above (and in the code) are:
+DPAA = Data Path Acceleration Architecture
+FMan = DPAA Frame Manager
+QMan = DPAA Queue Manager
+BMan = DPAA Buffers Manager
+QMI = QMan interface in FMan
+BMI = BMan interface in FMan
+FMan SP = FMan Storage Profiles
+MURAM = Multi-user RAM in FMan
+FQ = QMan Frame Queue
+Rx Dfl FQ = default reception FQ
+Rx Err FQ = Rx error frames FQ
+Tx Cnf FQ = Tx confirmation FQs
+Tx FQs = transmission frame queues
+dtsec = datapath three speed Ethernet controller (10/100/1000 Mbps)
+tgec = ten gigabit Ethernet controller (10 Gbps)
+memac = multirate Ethernet MAC (10/100/1000/10000)
+
+DPAA Ethernet Supported SoCs
+============================
+
+The DPAA drivers enable the Ethernet controllers present on the following SoCs:
+
+# PPC
+P1023
+P2041
+P3041
+P4080
+P5020
+P5040
+T1023
+T1024
+T1040
+T1042
+T2080
+T4240
+B4860
+
+# ARM
+LS1043A
+LS1046A
+
+Configuring DPAA Ethernet in your kernel
+========================================
+
+To enable the DPAA Ethernet driver, the following Kconfig options are required:
+
+# common for arch/arm64 and arch/powerpc platforms
+CONFIG_FSL_DPAA=y
+CONFIG_FSL_FMAN=y
+CONFIG_FSL_DPAA_ETH=y
+CONFIG_FSL_XGMAC_MDIO=y
+
+# for arch/powerpc only
+CONFIG_FSL_PAMU=y
+
+# common options needed for the PHYs used on the RDBs
+CONFIG_VITESSE_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_AQUANTIA_PHY=y
+
+DPAA Ethernet Frame Processing
+==============================
+
+On Rx, buffers for the incoming frames are retrieved from one of the three
+existing buffers pools. The driver initializes and seeds these, each with
+buffers of different sizes: 1KB, 2KB and 4KB.
+
+On Tx, all transmitted frames are returned to the driver through Tx
+confirmation frame queues. The driver is then responsible for freeing the
+buffers. In order to do this properly, a backpointer is added to the buffer
+before transmission that points to the skb. When the buffer returns to the
+driver on a confirmation FQ, the skb can be correctly consumed.
+
+DPAA Ethernet Features
+======================
+
+Currently the DPAA Ethernet driver enables the basic features required for
+a Linux Ethernet driver. The support for advanced features will be added
+gradually.
+
+The driver has Rx and Tx checksum offloading for UDP and TCP. Currently the Rx
+checksum offload feature is enabled by default and cannot be controlled through
+ethtool.
+
+The driver has support for multiple prioritized Tx traffic classes. Priorities
+range from 0 (lowest) to 3 (highest). These are mapped to HW workqueues with
+strict priority levels. Each traffic class contains NR_CPU TX queues. By
+default, only one traffic class is enabled and the lowest priority Tx queues
+are used. Higher priority traffic classes can be enabled with the mqprio
+qdisc. For example, all four traffic classes are enabled on an interface with
+the following command. Furthermore, skb priority levels are mapped to traffic
+classes as follows:
+
+	* priorities 0 to 3 - traffic class 0 (low priority)
+	* priorities 4 to 7 - traffic class 1 (medium-low priority)
+	* priorities 8 to 11 - traffic class 2 (medium-high priority)
+	* priorities 12 to 15 - traffic class 3 (high priority)
+
+tc qdisc add dev <int> root handle 1: \
+	 mqprio num_tc 4 map 0 0 0 0 1 1 1 1 2 2 2 2 3 3 3 3 hw 1
+
+Debugging
+=========
+
+The following statistics are exported for each interface through ethtool:
+
+	- interrupt count per CPU
+	- Rx packets count per CPU
+	- Tx packets count per CPU
+	- Tx confirmed packets count per CPU
+	- Tx S/G frames count per CPU
+	- Tx error count per CPU
+	- Rx error count per CPU
+	- Rx error count per type
+	- congestion related statistics:
+		- congestion status
+		- time spent in congestion
+		- number of time the device entered congestion
+		- dropped packets count per cause
+
+The driver also exports the following information in sysfs:
+
+	- the FQ IDs for each FQ type
+	/sys/devices/platform/dpaa-ethernet.0/net/<int>/fqids
+
+	- the IDs of the buffer pools in use
+	/sys/devices/platform/dpaa-ethernet.0/net/<int>/bpids
--- a/Documentation/networking/scaling.txt
+++ b/Documentation/networking/scaling.txt
@ -122,7 +122,7 @@ associated flow of the packet. The hash is either provided by hardware
 or will be computed in the stack. Capable hardware can pass the hash in
 the receive descriptor for the packet; this would usually be the same
 hash used for RSS (e.g. computed Toeplitz hash). The hash is saved in
-skb->rx_hash and can be used elsewhere in the stack as a hash of the
+skb->hash and can be used elsewhere in the stack as a hash of the
 packet’s flow.

 Each receive hardware queue has an associated list of CPUs to which
--- a/Documentation/networking/tcp.txt
+++ b/Documentation/networking/tcp.txt
@ -1,7 +1,7 @@
 TCP protocol
 ============

-Last updated: 9 February 2008
+Last updated: 3 June 2017

 Contents
 ========
@ -29,18 +29,19 @@ As of 2.6.13, Linux supports pluggable congestion control algorithms.
 A congestion control mechanism can be registered through functions in
 tcp_cong.c. The functions used by the congestion control mechanism are
 registered via passing a tcp_congestion_ops struct to
-tcp_register_congestion_control. As a minimum name, ssthresh,
-cong_avoid must be valid.
+tcp_register_congestion_control. As a minimum, the congestion control
+mechanism must provide a valid name and must implement either ssthresh,
+cong_avoid and undo_cwnd hooks or the "omnipotent" cong_control hook.

 Private data for a congestion control mechanism is stored in tp->ca_priv.
 tcp_ca(tp) returns a pointer to this space.  This is preallocated space - it
 is important to check the size of your private data will fit this space, or
-alternatively space could be allocated elsewhere and a pointer to it could
+alternatively, space could be allocated elsewhere and a pointer to it could
 be stored here.

 There are three kinds of congestion control algorithms currently: The
 simplest ones are derived from TCP reno (highspeed, scalable) and just
-provide an alternative the congestion window calculation. More complex
+provide an alternative congestion window calculation. More complex
 ones like BIC try to look at other events to provide better
 heuristics.  There are also round trip time based algorithms like
 Vegas and Westwood+.
@ -49,21 +50,15 @@ Good TCP congestion control is a complex problem because the algorithm
 needs to maintain fairness and performance. Please review current
 research and RFC's before developing new modules.

-The method that is used to determine which congestion control mechanism is
-determined by the setting of the sysctl net.ipv4.tcp_congestion_control.
-The default congestion control will be the last one registered (LIFO);
-so if you built everything as modules, the default will be reno. If you
-build with the defaults from Kconfig, then CUBIC will be builtin (not a
-module) and it will end up the default.
+The default congestion control mechanism is chosen based on the
+DEFAULT_TCP_CONG Kconfig parameter. If you really want a particular default
+value then you can set it using sysctl net.ipv4.tcp_congestion_control. The
+module will be autoloaded if needed and you will get the expected protocol. If
+you ask for an unknown congestion method, then the sysctl attempt will fail.

-If you really want a particular default value then you will need
-to set it with the sysctl.  If you use a sysctl, the module will be autoloaded
-if needed and you will get the expected protocol. If you ask for an
-unknown congestion method, then the sysctl attempt will fail.
-
-If you remove a tcp congestion control module, then you will get the next
+If you remove a TCP congestion control module, then you will get the next
 available one. Since reno cannot be built as a module, and cannot be
-deleted, it will always be available.
+removed, it will always be available.

 How the new TCP output machine [nyi] works.
 ===========================================
--- a/29
+++ b/29
@ -1172,7 +1172,7 @@ N:	clps711x

 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
 M:	Hartley Sweeten <hsweeten@visionengravers.com>
-M:	Ryan Mallon <rmallon@gmail.com>
+M:	Alexander Sverdlin <alexander.sverdlin@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-ep93xx/
@ -1489,13 +1489,15 @@ M:	Gregory Clement <gregory.clement@free-electrons.com>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/mach-mvebu/
-F:	drivers/rtc/rtc-armada38x.c
 F:	arch/arm/boot/dts/armada*
 F:	arch/arm/boot/dts/kirkwood*
+F:	arch/arm/configs/mvebu_*_defconfig
+F:	arch/arm/mach-mvebu/
 F:	arch/arm64/boot/dts/marvell/armada*
 F:	drivers/cpufreq/mvebu-cpufreq.c
-F:	arch/arm/configs/mvebu_*_defconfig
+F:	drivers/irqchip/irq-armada-370-xp.c
+F:	drivers/irqchip/irq-mvebu-*
+F:	drivers/rtc/rtc-armada38x.c

 ARM/Marvell Berlin SoC support
 M:	Jisheng Zhang <jszhang@marvell.com>
@ -1721,7 +1723,6 @@ N:	rockchip
 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene@kernel.org>
 M:	Krzysztof Kozlowski <krzk@kernel.org>
-R:	Javier Martinez Canillas <javier@osg.samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
@ -1829,7 +1830,6 @@ F:	drivers/edac/altera_edac.
 ARM/STI ARCHITECTURE
 M:	Patrice Chotard <patrice.chotard@st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L:	kernel@stlinux.com
 W:	http://www.stlinux.com
 S:	Maintained
 F:	arch/arm/mach-sti/
@ -5631,7 +5631,7 @@ F:	scripts/get_maintainer.pl

 GENWQE (IBM Generic Workqueue Card)
 M:	Frank Haverkamp <haver@linux.vnet.ibm.com>
-M:	Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
+M:	Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
 S:	Supported
 F:	drivers/misc/genwqe/

@ -5676,7 +5676,6 @@ F:	tools/testing/selftests/gpio/

 GPIO SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
-M:	Alexandre Courbot <gnurou@gmail.com>
 L:	linux-gpio@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
 S:	Maintained
@ -7716,7 +7715,7 @@ F:	drivers/platform/x86/hp_accel.c

 LIVE PATCHING
 M:	Josh Poimboeuf <jpoimboe@redhat.com>
-M:	Jessica Yu <jeyu@redhat.com>
+M:	Jessica Yu <jeyu@kernel.org>
 M:	Jiri Kosina <jikos@kernel.org>
 M:	Miroslav Benes <mbenes@suse.cz>
 R:	Petr Mladek <pmladek@suse.com>
@ -8517,7 +8516,7 @@ S:	Odd Fixes
 F:	drivers/media/radio/radio-miropcm20*

 MELLANOX MLX4 core VPI driver
-M:	Yishai Hadas <yishaih@mellanox.com>
+M:	Tariq Toukan <tariqt@mellanox.com>
 L:	netdev@vger.kernel.org
 L:	linux-rdma@vger.kernel.org
 W:	http://www.mellanox.com
@ -8525,7 +8524,6 @@ Q:	http://patchwork.ozlabs.org/project/netdev/list/
 S:	Supported
 F:	drivers/net/ethernet/mellanox/mlx4/
 F:	include/linux/mlx4/
-F:	include/uapi/rdma/mlx4-abi.h

 MELLANOX MLX4 IB driver
 M:	Yishai Hadas <yishaih@mellanox.com>
@ -8535,6 +8533,7 @@ Q:	http://patchwork.kernel.org/project/linux-rdma/list/
 S:	Supported
 F:	drivers/infiniband/hw/mlx4/
 F:	include/linux/mlx4/
+F:	include/uapi/rdma/mlx4-abi.h

 MELLANOX MLX5 core VPI driver
 M:	Saeed Mahameed <saeedm@mellanox.com>
@ -8547,7 +8546,6 @@ Q:	http://patchwork.ozlabs.org/project/netdev/list/
 S:	Supported
 F:	drivers/net/ethernet/mellanox/mlx5/core/
 F:	include/linux/mlx5/
-F:	include/uapi/rdma/mlx5-abi.h

 MELLANOX MLX5 IB driver
 M:	Matan Barak <matanb@mellanox.com>
@ -8558,6 +8556,7 @@ Q:	http://patchwork.kernel.org/project/linux-rdma/list/
 S:	Supported
 F:	drivers/infiniband/hw/mlx5/
 F:	include/linux/mlx5/
+F:	include/uapi/rdma/mlx5-abi.h

 MELEXIS MLX90614 DRIVER
 M:	Crt Mori <cmo@melexis.com>
@ -8597,7 +8596,7 @@ S:	Maintained
 F:	drivers/media/dvb-frontends/mn88473*

 MODULE SUPPORT
-M:	Jessica Yu <jeyu@redhat.com>
+M:	Jessica Yu <jeyu@kernel.org>
 M:	Rusty Russell <rusty@rustcorp.com.au>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next
 S:	Maintained
@ -11277,7 +11276,6 @@ F:	drivers/media/rc/serial_ir.c

 STI CEC DRIVER
 M:	Benjamin Gaignard <benjamin.gaignard@linaro.org>
-L:	kernel@stlinux.com
 S:	Maintained
 F:	drivers/staging/media/st-cec/
 F:	Documentation/devicetree/bindings/media/stih-cec.txt
@ -11787,6 +11785,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
 S:	Supported
 F:	arch/arm/mach-davinci/
 F:	drivers/i2c/busses/i2c-davinci.c
+F:	arch/arm/boot/dts/da850*

 TI DAVINCI SERIES MEDIA DRIVER
 M:	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
@ -13870,7 +13869,7 @@ S:	Odd fixes
 F:	drivers/net/wireless/wl3501*

 WOLFSON MICROELECTRONICS DRIVERS
-L:	patches@opensource.wolfsonmicro.com
+L:	patches@opensource.cirrus.com
 T:	git https://github.com/CirrusLogic/linux-drivers.git
 W:	https://github.com/CirrusLogic/linux-drivers/wiki
 S:	Supported
--- a/2
+++ b/2
@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 12
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
 NAME = Fearless Coyote

 # *DOCUMENTATION*
--- a/arch/arc/mm/mmap.c
+++ b/arch/arc/mm/mmap.c
@ -65,7 +65,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,

 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}

--- a/arch/arm/boot/compressed/efi-header.S
+++ b/arch/arm/boot/compressed/efi-header.S
@ -17,14 +17,12 @@
 		@ there.
 		.inst	'M' | ('Z' << 8) | (0x1310 << 16)   @ tstne r0, #0x4d000
 #else
-		mov	r0, r0
+		W(mov)	r0, r0
 #endif
 		.endm

 		.macro	__EFI_HEADER
 #ifdef CONFIG_EFI_STUB
-		b	__efi_start
-
 		.set	start_offset, __efi_start - start
 		.org	start + 0x3c
 		@
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@ -130,19 +130,22 @@ start:
 		.rept	7
 		__nop
 		.endr
-   ARM(		mov	r0, r0		)
-   ARM(		b	1f		)
- THUMB(		badr	r12, 1f		)
- THUMB(		bx	r12		)
+#ifndef CONFIG_THUMB2_KERNEL
+		mov	r0, r0
+#else
+ AR_CLASS(	sub	pc, pc, #3	)	@ A/R: switch to Thumb2 mode
+  M_CLASS(	nop.w			)	@ M: already in Thumb2 mode
+		.thumb
+#endif
+		W(b)	1f

 		.word	_magic_sig	@ Magic numbers to help the loader
 		.word	_magic_start	@ absolute load/run zImage address
 		.word	_magic_end	@ zImage end address
 		.word	0x04030201	@ endianness flag

- THUMB(		.thumb			)
-1:		__EFI_HEADER
-
+		__EFI_HEADER
+1:
 ARM_BE8(	setend	be		)	@ go BE8 if compiled for BE8
 AR_CLASS(	mrs	r9, cpsr	)
 #ifdef CONFIG_ARM_VIRT_EXT
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@ -220,7 +220,7 @@ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)

 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE7)		/* uart0_rtsn.gpio1_9 */
 		>;
 	};

@ -280,10 +280,6 @@ AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdInt - gpmc_ad12.gpio1_1
 			AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdReset - gpmc_ad13.gpio1_13 */
 			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7)	/* nDispReset - gpmc_ad14.gpio1_14 */
 			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* USB1_enPower - gpmc_a1.gpio1_17 */
-			/* AVR Programming - SPI Bus (bit bang) - Screen and Keyboard */
-			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE7)	/* Kbd/Disp/BattMOSI spi0_d0.gpio0_3 */
-			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE7)	/* Kbd/Disp/BattMISO spi0_d1.gpio0_4 */
-			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE7)	/* Kbd/Disp/BattSCLK spi0_clk.gpio0_2 */
 			/* PDI Bus - Battery system */
 			AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)	/* nBattReset  gpmc_a0.gpio1_16 */
 			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7)	/* BattPDIData gpmc_ad15.gpio1_15 */
@ -384,7 +380,7 @@ &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&vmmcsd_fixed>;
 };

--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@ -3,6 +3,11 @@
 #include <dt-bindings/clock/bcm2835-aux.h>
 #include <dt-bindings/gpio/gpio.h>

+/* firmware-provided startup stubs live here, where the secondary CPUs are
+ * spinning.
+ */
+/memreserve/ 0x00000000 0x00001000;
+
 /* This include file covers the common peripherals and configuration between
 * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
 * bcm2835.dtsi and bcm2836.dtsi.
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@ -120,10 +120,16 @@ mdio {

 		ethphy0: ethernet-phy@2 {
 			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 		};

 		ethphy1: ethernet-phy@1 {
 			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
 		};
 	};
 };
--- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
@ -137,8 +137,8 @@ netcp: netcp@26000000 {
 	/* NetCP address range */
 	ranges = <0 0x26000000 0x1000000>;

-	clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>, <&clkosr>;
-	clock-names = "pa_clk", "ethss_clk", "cpts", "osr_clk";
+	clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>;
+	clock-names = "pa_clk", "ethss_clk", "cpts";
 	dma-coherent;

 	ti,navigator-dmas = <&dma_gbe 0>,
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@ -232,6 +232,14 @@ pscrst: reset-controller {
 			};
 		};

+		osr: sram@70000000 {
+			compatible = "mmio-sram";
+			reg = <0x70000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clkosr>;
+		};
+
 		dspgpio0: keystone_dsp_gpio@02620240 {
 			compatible = "ti,keystone-dsp-gpio";
 			gpio-controller;
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@ -558,10 +558,11 @@ rtc: rtc@01f00000 {
 		};

 		r_ccu: clock@1f01400 {
-			compatible = "allwinner,sun50i-a64-r-ccu";
+			compatible = "allwinner,sun8i-h3-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&osc32k>, <&iosc>;
-			clock-names = "hosc", "losc", "iosc";
+			clocks = <&osc24M>, <&osc32k>, <&iosc>,
+				 <&ccu 9>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@ -1,4 +1,4 @@
-#include <versatile-ab.dts>
+#include "versatile-ab.dts"

 / {
 	model = "ARM Versatile PB";
--- a/arch/arm/common/mcpm_entry.c
+++ b/arch/arm/common/mcpm_entry.c
@ -235,7 +235,7 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster)
 	return ret;
 }

-typedef void (*phys_reset_t)(unsigned long);
+typedef typeof(cpu_reset) phys_reset_t;

 void mcpm_cpu_power_down(void)
 {
@ -300,7 +300,7 @@ void mcpm_cpu_power_down(void)
 	 * on the CPU.
 	 */
 	phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset);
-	phys_reset(__pa_symbol(mcpm_entry_point));
+	phys_reset(__pa_symbol(mcpm_entry_point), false);

 	/* should never get here */
 	BUG();
@ -389,7 +389,7 @@ static int __init nocache_trampoline(unsigned long _arg)
 	__mcpm_cpu_down(cpu, cluster);

 	phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset);
-	phys_reset(__pa_symbol(mcpm_entry_point));
+	phys_reset(__pa_symbol(mcpm_entry_point), false);
 	BUG();
 }

--- a/arch/arm/include/asm/device.h
+++ b/arch/arm/include/asm/device.h
@ -19,7 +19,8 @@ struct dev_archdata {
 #ifdef CONFIG_XEN
 	const struct dma_map_ops *dev_dma_ops;
 #endif
-	bool dma_coherent;
+	unsigned int dma_coherent:1;
+	unsigned int dma_ops_setup:1;
 };

 struct omap_device;
--- a/arch/arm/include/asm/pgtable-nommu.h
+++ b/arch/arm/include/asm/pgtable-nommu.h
@ -66,6 +66,7 @@ typedef pte_t *pte_addr_t;
 #define pgprot_noncached(prot)	(prot)
 #define pgprot_writecombine(prot) (prot)
 #define pgprot_dmacoherent(prot) (prot)
+#define pgprot_device(prot)	(prot)


 /*
--- a/arch/arm/kvm/init.S
+++ b/arch/arm/kvm/init.S
@ -104,7 +104,6 @@ __do_hyp_init:
 	@  - Write permission implies XN: disabled
 	@  - Instruction cache: enabled
 	@  - Data/Unified cache: enabled
-	@  - Memory alignment checks: enabled
 	@  - MMU: enabled (this code must be run from an identity mapping)
 	mrc	p15, 4, r0, c1, c0, 0	@ HSCR
 	ldr	r2, =HSCTLR_MASK
@ -112,8 +111,8 @@ __do_hyp_init:
 	mrc	p15, 0, r1, c1, c0, 0	@ SCTLR
 	ldr	r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C)
 	and	r1, r1, r2
- ARM(	ldr	r2, =(HSCTLR_M | HSCTLR_A)			)
- THUMB(	ldr	r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE)		)
+ ARM(	ldr	r2, =(HSCTLR_M)					)
+ THUMB(	ldr	r2, =(HSCTLR_M | HSCTLR_TE)			)
 	orr	r1, r1, r2
 	orr	r0, r0, r1
 	mcr	p15, 4, r0, c1, c0, 0	@ HSCR
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@ -1,6 +1,7 @@
 menuconfig ARCH_AT91
 	bool "Atmel SoCs"
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
+	select ARM_CPU_SUSPEND if PM
 	select COMMON_CLK_AT91
 	select GPIOLIB
 	select PINCTRL
--- a/arch/arm/mach-davinci/pm.c
+++ b/arch/arm/mach-davinci/pm.c
@ -153,7 +153,8 @@ int __init davinci_pm_init(void)
 	davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL);
 	if (!davinci_sram_suspend) {
 		pr_err("PM: cannot allocate SRAM memory\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto no_sram_mem;
 	}

 	davinci_sram_push(davinci_sram_suspend, davinci_cpu_suspend,
@ -161,6 +162,10 @@ int __init davinci_pm_init(void)

 	suspend_set_ops(&davinci_pm_ops);

+	return 0;
+
+no_sram_mem:
+	iounmap(pm_config.ddrpsc_reg_base);
 no_ddrpsc_mem:
 	iounmap(pm_config.ddrpll_reg_base);
 no_ddrpll_mem:
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@ -2311,7 +2311,14 @@ int arm_iommu_attach_device(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(arm_iommu_attach_device);

-static void __arm_iommu_detach_device(struct device *dev)
+/**
+ * arm_iommu_detach_device
+ * @dev: valid struct device pointer
+ *
+ * Detaches the provided device from a previously attached map.
+ * This voids the dma operations (dma_map_ops pointer)
+ */
+void arm_iommu_detach_device(struct device *dev)
 {
 	struct dma_iommu_mapping *mapping;

@ -2324,22 +2331,10 @@ static void __arm_iommu_detach_device(struct device *dev)
 	iommu_detach_device(mapping->domain, dev);
 	kref_put(&mapping->kref, release_iommu_mapping);
 	to_dma_iommu_mapping(dev) = NULL;
+	set_dma_ops(dev, NULL);

 	pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev));
 }
-
-/**
- * arm_iommu_detach_device
- * @dev: valid struct device pointer
- *
- * Detaches the provided device from a previously attached map.
- * This voids the dma operations (dma_map_ops pointer)
- */
-void arm_iommu_detach_device(struct device *dev)
-{
-	__arm_iommu_detach_device(dev);
-	set_dma_ops(dev, NULL);
-}
 EXPORT_SYMBOL_GPL(arm_iommu_detach_device);

 static const struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent)
@ -2379,7 +2374,7 @@ static void arm_teardown_iommu_dma_ops(struct device *dev)
 	if (!mapping)
 		return;

-	__arm_iommu_detach_device(dev);
+	arm_iommu_detach_device(dev);
 	arm_iommu_release_mapping(mapping);
 }

@ -2430,9 +2425,13 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 		dev->dma_ops = xen_dma_ops;
 	}
 #endif
+	dev->archdata.dma_ops_setup = true;
 }

 void arch_teardown_dma_ops(struct device *dev)
 {
+	if (!dev->archdata.dma_ops_setup)
+		return;
+
 	arm_teardown_iommu_dma_ops(dev);
 }
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@ -90,7 +90,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,

 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}

@ -141,7 +141,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 			addr = PAGE_ALIGN(addr);
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-				(!vma || addr + len <= vma->vm_start))
+				(!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}

--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@ -1084,10 +1084,6 @@ config SYSVIPC_COMPAT
 	def_bool y
 	depends on COMPAT && SYSVIPC

-config KEYS_COMPAT
-	def_bool y
-	depends on COMPAT && KEYS
-
 endmenu

 menu "Power management options"
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@ -406,8 +406,9 @@ rtc: rtc@1f00000 {
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun50i-a64-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&osc32k>, <&iosc>;
-			clock-names = "hosc", "losc", "iosc";
+			clocks = <&osc24M>, <&osc32k>, <&iosc>,
+				 <&ccu 11>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@ -40,7 +40,7 @@
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

-#include "sunxi-h3-h5.dtsi"
+#include <arm/sunxi-h3-h5.dtsi>

 / {
 	cpus {
--- a/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi
@ -1 +0,0 @@
-../../../../arm/boot/dts/sunxi-h3-h5.dtsi
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@ -231,8 +231,7 @@ cpm_sdhci0: sdhci@780000 {
 			cpm_crypto: crypto@800000 {
 				compatible = "inside-secure,safexcel-eip197";
 				reg = <0x800000 0x200000>;
-				interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
-				| IRQ_TYPE_LEVEL_HIGH)>,
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@ -221,8 +221,7 @@ cps_trng: trng@760000 {
 			cps_crypto: crypto@800000 {
 				compatible = "inside-secure,safexcel-eip197";
 				reg = <0x800000 0x200000>;
-				interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
-				| IRQ_TYPE_LEVEL_HIGH)>,
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@ -68,6 +68,7 @@ CONFIG_PCIE_QCOM=y
 CONFIG_PCIE_ARMADA_8K=y
 CONFIG_PCI_AARDVARK=y
 CONFIG_PCIE_RCAR=y
+CONFIG_PCIE_ROCKCHIP=m
 CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCI_XGENE=y
 CONFIG_ARM64_VA_BITS_48=y
@ -208,6 +209,8 @@ CONFIG_BRCMFMAC=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SDIO=m
 CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_ADC=m
+CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PM8941_PWRKEY=y
@ -263,6 +266,7 @@ CONFIG_SPI_MESON_SPIFC=m
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_QUP=y
+CONFIG_SPI_ROCKCHIP=y
 CONFIG_SPI_S3C64XX=y
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
@ -292,6 +296,7 @@ CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
 CONFIG_EXYNOS_THERMAL=y
+CONFIG_ROCKCHIP_THERMAL=m
 CONFIG_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_MESON_GXBB_WATCHDOG=m
@ -300,12 +305,14 @@ CONFIG_RENESAS_WDT=y
 CONFIG_BCM2835_WDT=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_I2C=y
+CONFIG_MFD_CROS_EC_SPI=y
 CONFIG_MFD_EXYNOS_LPASS=m
 CONFIG_MFD_HI655X_PMIC=y
 CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
+CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_HI655X=y
@ -473,8 +480,10 @@ CONFIG_ARCH_TEGRA_186_SOC=y
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_IIO=y
 CONFIG_EXYNOS_ADC=y
+CONFIG_ROCKCHIP_SARADC=m
 CONFIG_PWM=y
 CONFIG_PWM_BCM2835=m
+CONFIG_PWM_CROS_EC=m
 CONFIG_PWM_MESON=m
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_PWM_SAMSUNG=y
@ -484,6 +493,7 @@ CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_ROCKCHIP_PCIE=m
 CONFIG_PHY_XGENE=y
 CONFIG_PHY_TEGRA_XUSB=y
 CONFIG_ARM_SCPI_PROTOCOL=y
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@ -286,6 +286,10 @@
 #define SCTLR_ELx_A	(1 << 1)
 #define SCTLR_ELx_M	1

+#define SCTLR_EL2_RES1	((1 << 4)  | (1 << 5)  | (1 << 11) | (1 << 16) | \
+			 (1 << 16) | (1 << 18) | (1 << 22) | (1 << 23) | \
+			 (1 << 28) | (1 << 29))
+
 #define SCTLR_ELx_FLAGS	(SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \
 			 SCTLR_ELx_SA | SCTLR_ELx_I)

--- a/arch/arm64/kvm/hyp-init.S
+++ b/arch/arm64/kvm/hyp-init.S
@ -106,10 +106,13 @@ __do_hyp_init:
 	tlbi	alle2
 	dsb	sy

-	mrs	x4, sctlr_el2
-	and	x4, x4, #SCTLR_ELx_EE	// preserve endianness of EL2
-	ldr	x5, =SCTLR_ELx_FLAGS
-	orr	x4, x4, x5
+	/*
+	 * Preserve all the RES1 bits while setting the default flags,
+	 * as well as the EE bit on BE. Drop the A flag since the compiler
+	 * is allowed to generate unaligned accesses.
+	 */
+	ldr	x4, =(SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A))
+CPU_BE(	orr	x4, x4, #SCTLR_ELx_EE)
 	msr	sctlr_el2, x4
 	isb

--- a/arch/arm64/kvm/vgic-sys-reg-v3.c
+++ b/arch/arm64/kvm/vgic-sys-reg-v3.c
@ -65,8 +65,8 @@ static bool access_gic_ctlr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		 * Here set VMCR.CTLR in ICC_CTLR_EL1 layout.
 		 * The vgic_set_vmcr() will convert to ICH_VMCR layout.
 		 */
-		vmcr.ctlr = val & ICC_CTLR_EL1_CBPR_MASK;
-		vmcr.ctlr |= val & ICC_CTLR_EL1_EOImode_MASK;
+		vmcr.cbpr = (val & ICC_CTLR_EL1_CBPR_MASK) >> ICC_CTLR_EL1_CBPR_SHIFT;
+		vmcr.eoim = (val & ICC_CTLR_EL1_EOImode_MASK) >> ICC_CTLR_EL1_EOImode_SHIFT;
 		vgic_set_vmcr(vcpu, &vmcr);
 	} else {
 		val = 0;
@ -83,8 +83,8 @@ static bool access_gic_ctlr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		 * The VMCR.CTLR value is in ICC_CTLR_EL1 layout.
 		 * Extract it directly using ICC_CTLR_EL1 reg definitions.
 		 */
-		val |= vmcr.ctlr & ICC_CTLR_EL1_CBPR_MASK;
-		val |= vmcr.ctlr & ICC_CTLR_EL1_EOImode_MASK;
+		val |= (vmcr.cbpr << ICC_CTLR_EL1_CBPR_SHIFT) & ICC_CTLR_EL1_CBPR_MASK;
+		val |= (vmcr.eoim << ICC_CTLR_EL1_EOImode_SHIFT) & ICC_CTLR_EL1_EOImode_MASK;

 		p->regval = val;
 	}
@ -135,7 +135,7 @@ static bool access_gic_bpr1(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		p->regval = 0;

 	vgic_get_vmcr(vcpu, &vmcr);
-	if (!((vmcr.ctlr & ICH_VMCR_CBPR_MASK) >> ICH_VMCR_CBPR_SHIFT)) {
+	if (!vmcr.cbpr) {
 		if (p->is_write) {
 			vmcr.abpr = (p->regval & ICC_BPR1_EL1_MASK) >>
 				     ICC_BPR1_EL1_SHIFT;
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@ -36,6 +36,7 @@ int bpf_jit_enable __read_mostly;
 #define TMP_REG_1 (MAX_BPF_JIT_REG + 0)
 #define TMP_REG_2 (MAX_BPF_JIT_REG + 1)
 #define TCALL_CNT (MAX_BPF_JIT_REG + 2)
+#define TMP_REG_3 (MAX_BPF_JIT_REG + 3)

 /* Map BPF registers to A64 registers */
 static const int bpf2a64[] = {
@ -57,6 +58,7 @@ static const int bpf2a64[] = {
 	/* temporary registers for internal BPF JIT */
 	[TMP_REG_1] = A64_R(10),
 	[TMP_REG_2] = A64_R(11),
+	[TMP_REG_3] = A64_R(12),
 	/* tail_call_cnt */
 	[TCALL_CNT] = A64_R(26),
 	/* temporary register for blinding constants */
@ -319,6 +321,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 	const u8 src = bpf2a64[insn->src_reg];
 	const u8 tmp = bpf2a64[TMP_REG_1];
 	const u8 tmp2 = bpf2a64[TMP_REG_2];
+	const u8 tmp3 = bpf2a64[TMP_REG_3];
 	const s16 off = insn->off;
 	const s32 imm = insn->imm;
 	const int i = insn - ctx->prog->insnsi;
@ -689,10 +692,10 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 		emit(A64_PRFM(tmp, PST, L1, STRM), ctx);
 		emit(A64_LDXR(isdw, tmp2, tmp), ctx);
 		emit(A64_ADD(isdw, tmp2, tmp2, src), ctx);
-		emit(A64_STXR(isdw, tmp2, tmp, tmp2), ctx);
+		emit(A64_STXR(isdw, tmp2, tmp, tmp3), ctx);
 		jmp_offset = -3;
 		check_imm19(jmp_offset);
-		emit(A64_CBNZ(0, tmp2, jmp_offset), ctx);
+		emit(A64_CBNZ(0, tmp3, jmp_offset), ctx);
 		break;

 	/* R0 = ntohx(*(size *)(((struct sk_buff *)R6)->data + imm)) */
--- a/arch/frv/mm/elf-fdpic.c
+++ b/arch/frv/mm/elf-fdpic.c
@ -75,7 +75,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi
 		addr = PAGE_ALIGN(addr);
 		vma = find_vma(current->mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			goto success;
 	}

--- a/arch/hexagon/mm/uaccess.c
+++ b/arch/hexagon/mm/uaccess.c
@ -37,15 +37,14 @@ __kernel_size_t __clear_user_hexagon(void __user *dest, unsigned long count)
 	long uncleared;

 	while (count > PAGE_SIZE) {
-		uncleared = __copy_to_user_hexagon(dest, &empty_zero_page,
-						PAGE_SIZE);
+		uncleared = raw_copy_to_user(dest, &empty_zero_page, PAGE_SIZE);
 		if (uncleared)
 			return count - (PAGE_SIZE - uncleared);
 		count -= PAGE_SIZE;
 		dest += PAGE_SIZE;
 	}
 	if (count)
-		count = __copy_to_user_hexagon(dest, &empty_zero_page, count);
+		count = raw_copy_to_user(dest, &empty_zero_page, count);

 	return count;
 }
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@ -128,19 +128,19 @@ quiet_cmd_cpp_its_S = ITS     $@
 			-DADDR_BITS=$(ADDR_BITS) \
 			-DADDR_CELLS=$(itb_addr_cells)

-$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE
 	$(call if_changed_dep,cpp_its_S,none,vmlinux.bin)

-$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE
 	$(call if_changed_dep,cpp_its_S,gzip,vmlinux.bin.gz)

-$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX)  FORCE
 	$(call if_changed_dep,cpp_its_S,bzip2,vmlinux.bin.bz2)

-$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE
 	$(call if_changed_dep,cpp_its_S,lzma,vmlinux.bin.lzma)

-$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE
 	$(call if_changed_dep,cpp_its_S,lzo,vmlinux.bin.lzo)

 quiet_cmd_itb-image = ITB     $@
--- a/arch/mips/include/asm/highmem.h
+++ b/arch/mips/include/asm/highmem.h
@ -35,7 +35,12 @@ extern pte_t *pkmap_page_table;
 * easily, subsequent pte tables have to be allocated in one physical
 * chunk of RAM.
 */
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+#define LAST_PKMAP 512
+#else
 #define LAST_PKMAP 1024
+#endif
+
 #define LAST_PKMAP_MASK (LAST_PKMAP-1)
 #define PKMAP_NR(virt)	((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)	(PKMAP_BASE + ((nr) << PAGE_SHIFT))
--- a/arch/mips/include/asm/kprobes.h
+++ b/arch/mips/include/asm/kprobes.h
@ -43,7 +43,8 @@ typedef union mips_instruction kprobe_opcode_t;

 #define flush_insn_slot(p)						\
 do {									\
-	flush_icache_range((unsigned long)p->addr,			\
+	if (p->addr)							\
+		flush_icache_range((unsigned long)p->addr,		\
 			   (unsigned long)p->addr +			\
 			   (MAX_INSN_SIZE * sizeof(kprobe_opcode_t)));	\
 } while (0)
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@ -19,6 +19,10 @@
 #define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopmd.h>

+#ifdef CONFIG_HIGHMEM
+#include <asm/highmem.h>
+#endif
+
 extern int temp_tlb_entry;

 /*
@ -62,7 +66,8 @@ extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,

 #define VMALLOC_START	  MAP_BASE

-#define PKMAP_BASE		(0xfe000000UL)
+#define PKMAP_END	((FIXADDR_START) & ~((LAST_PKMAP << PAGE_SHIFT)-1))
+#define PKMAP_BASE	(PKMAP_END - PAGE_SIZE * LAST_PKMAP)

 #ifdef CONFIG_HIGHMEM
 # define VMALLOC_END	(PKMAP_BASE-2*PAGE_SIZE)
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@ -804,8 +804,10 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 			break;
 		}
 		/* Compact branch: BNEZC || JIALC */
-		if (insn.i_format.rs)
+		if (!insn.i_format.rs) {
+			/* JIALC: set $31/ra */
 			regs->regs[31] = epc + 4;
+		}
 		regs->cp0_epc += 8;
 		break;
 #endif
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@ -38,20 +38,6 @@ void arch_ftrace_update_code(int command)

 #endif

-/*
- * Check if the address is in kernel space
- *
- * Clone core_kernel_text() from kernel/extable.c, but doesn't call
- * init_kernel_text() for Ftrace doesn't trace functions in init sections.
- */
-static inline int in_kernel_space(unsigned long ip)
-{
-	if (ip >= (unsigned long)_stext &&
-	    ip <= (unsigned long)_etext)
-		return 1;
-	return 0;
-}
-
 #ifdef CONFIG_DYNAMIC_FTRACE

 #define JAL 0x0c000000		/* jump & link: ip --> ra, jump to target */
@ -198,7 +184,7 @@ int ftrace_make_nop(struct module *mod,
 	 * If ip is in kernel space, no long call, otherwise, long call is
 	 * needed.
 	 */
-	new = in_kernel_space(ip) ? INSN_NOP : INSN_B_1F;
+	new = core_kernel_text(ip) ? INSN_NOP : INSN_B_1F;
 #ifdef CONFIG_64BIT
 	return ftrace_modify_code(ip, new);
 #else
@ -218,12 +204,12 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	unsigned int new;
 	unsigned long ip = rec->ip;

-	new = in_kernel_space(ip) ? insn_jal_ftrace_caller : insn_la_mcount[0];
+	new = core_kernel_text(ip) ? insn_jal_ftrace_caller : insn_la_mcount[0];

 #ifdef CONFIG_64BIT
 	return ftrace_modify_code(ip, new);
 #else
-	return ftrace_modify_code_2r(ip, new, in_kernel_space(ip) ?
+	return ftrace_modify_code_2r(ip, new, core_kernel_text(ip) ?
 						INSN_NOP : insn_la_mcount[1]);
 #endif
 }
@ -289,7 +275,7 @@ unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
 	 * instruction "lui v1, hi_16bit_of_mcount"(offset is 24), but for
 	 * kernel, move after the instruction "move ra, at"(offset is 16)
 	 */
-	ip = self_ra - (in_kernel_space(self_ra) ? 16 : 24);
+	ip = self_ra - (core_kernel_text(self_ra) ? 16 : 24);

 	/*
 	 * search the text until finding the non-store instruction or "s{d,w}
@ -394,7 +380,7 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 	 * entries configured through the tracing/set_graph_function interface.
 	 */

-	insns = in_kernel_space(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1;
+	insns = core_kernel_text(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1;
 	trace.func = self_ra - (MCOUNT_INSN_SIZE * insns);

 	/* Only trace if the calling function expects to */
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@ -1597,7 +1597,6 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
 		break;
 	case CPU_P5600:
 	case CPU_P6600:
-	case CPU_I6400:
 		/* 8-bit event numbers */
 		raw_id = config & 0x1ff;
 		base_id = raw_id & 0xff;
@ -1610,6 +1609,11 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
 		raw_event.range = P;
 #endif
 		break;
+	case CPU_I6400:
+		/* 8-bit event numbers */
+		base_id = config & 0xff;
+		raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
+		break;
 	case CPU_1004K:
 		if (IS_BOTH_COUNTERS_1004K_EVENT(base_id))
 			raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
--- a/arch/mips/mm/mmap.c
+++ b/arch/mips/mm/mmap.c
@ -93,7 +93,7 @@ static unsigned long arch_get_unmapped_area_common(struct file *filp,

 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}

--- a/arch/mips/mm/pgtable-32.c
+++ b/arch/mips/mm/pgtable-32.c
@ -51,15 +51,15 @@ void __init pagetable_init(void)
 	/*
 	 * Fixed mappings:
 	 */
-	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
-	fixrange_init(vaddr, vaddr + FIXADDR_SIZE, pgd_base);
+	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1);
+	fixrange_init(vaddr & PMD_MASK, vaddr + FIXADDR_SIZE, pgd_base);

 #ifdef CONFIG_HIGHMEM
 	/*
 	 * Permanent kmaps:
 	 */
 	vaddr = PKMAP_BASE;
-	fixrange_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);
+	fixrange_init(vaddr & PMD_MASK, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);

 	pgd = swapper_pg_dir + __pgd_offset(vaddr);
 	pud = pud_offset(pgd, vaddr);
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@ -90,7 +90,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		unsigned long len, unsigned long pgoff, unsigned long flags)
 {
 	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
+	struct vm_area_struct *vma, *prev;
 	unsigned long task_size = TASK_SIZE;
 	int do_color_align, last_mmap;
 	struct vm_unmapped_area_info info;
@ -117,9 +117,10 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		else
 			addr = PAGE_ALIGN(addr);

-		vma = find_vma(mm, addr);
+		vma = find_vma_prev(mm, addr, &prev);
 		if (task_size - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)) &&
+		    (!prev || addr >= vm_end_gap(prev)))
 			goto found_addr;
 	}

@ -143,7 +144,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 			  const unsigned long len, const unsigned long pgoff,
 			  const unsigned long flags)
 {
-	struct vm_area_struct *vma;
+	struct vm_area_struct *vma, *prev;
 	struct mm_struct *mm = current->mm;
 	unsigned long addr = addr0;
 	int do_color_align, last_mmap;
@ -177,9 +178,11 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 			addr = COLOR_ALIGN(addr, last_mmap, pgoff);
 		else
 			addr = PAGE_ALIGN(addr);
-		vma = find_vma(mm, addr);
+
+		vma = find_vma_prev(mm, addr, &prev);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)) &&
+		    (!prev || addr >= vm_end_gap(prev)))
 			goto found_addr;
 	}

--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@ -380,22 +380,6 @@ source "arch/powerpc/platforms/Kconfig"

 menu "Kernel options"

-config PPC_DT_CPU_FTRS
-	bool "Device-tree based CPU feature discovery & setup"
-	depends on PPC_BOOK3S_64
-	default n
-	help
-	  This enables code to use a new device tree binding for describing CPU
-	  compatibility and features. Saying Y here will attempt to use the new
-	  binding if the firmware provides it. Currently only the skiboot
-	  firmware provides this binding.
-	  If you're not sure say Y.
-
-config PPC_CPUFEATURES_ENABLE_UNKNOWN
-	bool "cpufeatures pass through unknown features to guest/userspace"
-	depends on PPC_DT_CPU_FTRS
-	default y
-
 config HIGHMEM
 	bool "High memory support"
 	depends on PPC32
@ -1215,11 +1199,6 @@ source "arch/powerpc/Kconfig.debug"

 source "security/Kconfig"

-config KEYS_COMPAT
-	bool
-	depends on COMPAT && KEYS
-	default y
-
 source "crypto/Kconfig"

 config PPC_LIB_RHEAP
--- a/arch/powerpc/include/asm/book3s/64/hash-4k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h
@ -8,7 +8,7 @@
 #define H_PTE_INDEX_SIZE  9
 #define H_PMD_INDEX_SIZE  7
 #define H_PUD_INDEX_SIZE  9
-#define H_PGD_INDEX_SIZE  12
+#define H_PGD_INDEX_SIZE  9

 #ifndef __ASSEMBLY__
 #define H_PTE_TABLE_SIZE	(sizeof(pte_t) << H_PTE_INDEX_SIZE)
--- a/arch/powerpc/include/asm/bug.h
+++ b/arch/powerpc/include/asm/bug.h
@ -104,7 +104,7 @@
 		"1:	"PPC_TLNEI"	%4,0\n"			\
 		_EMIT_BUG_ENTRY					\
 		: : "i" (__FILE__), "i" (__LINE__),		\
-		  "i" (BUGFLAG_TAINT(TAINT_WARN)),		\
+		  "i" (BUGFLAG_WARNING|BUGFLAG_TAINT(TAINT_WARN)),\
 		  "i" (sizeof(struct bug_entry)),		\
 		  "r" (__ret_warn_on));				\
 	}							\
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@ -214,7 +214,6 @@ enum {
 #define CPU_FTR_DAWR			LONG_ASM_CONST(0x0400000000000000)
 #define CPU_FTR_DABRX			LONG_ASM_CONST(0x0800000000000000)
 #define CPU_FTR_PMAO_BUG		LONG_ASM_CONST(0x1000000000000000)
-#define CPU_FTR_SUBCORE			LONG_ASM_CONST(0x2000000000000000)
 #define CPU_FTR_POWER9_DD1		LONG_ASM_CONST(0x4000000000000000)

 #ifndef __ASSEMBLY__
@ -463,7 +462,7 @@ enum {
 	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
 	    CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \
-	    CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP | CPU_FTR_SUBCORE)
+	    CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP)
 #define CPU_FTRS_POWER8E (CPU_FTRS_POWER8 | CPU_FTR_PMAO_BUG)
 #define CPU_FTRS_POWER8_DD1 (CPU_FTRS_POWER8 & ~CPU_FTR_DBELL)
 #define CPU_FTRS_POWER9 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@ -110,13 +110,18 @@ void release_thread(struct task_struct *);
 #define TASK_SIZE_128TB (0x0000800000000000UL)
 #define TASK_SIZE_512TB (0x0002000000000000UL)

-#ifdef CONFIG_PPC_BOOK3S_64
+/*
+ * For now 512TB is only supported with book3s and 64K linux page size.
+ */
+#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_64K_PAGES)
 /*
 * Max value currently used:
 */
-#define TASK_SIZE_USER64	TASK_SIZE_512TB
+#define TASK_SIZE_USER64		TASK_SIZE_512TB
+#define DEFAULT_MAP_WINDOW_USER64	TASK_SIZE_128TB
 #else
-#define TASK_SIZE_USER64	TASK_SIZE_64TB
+#define TASK_SIZE_USER64		TASK_SIZE_64TB
+#define DEFAULT_MAP_WINDOW_USER64	TASK_SIZE_64TB
 #endif

 /*
@ -132,7 +137,7 @@ void release_thread(struct task_struct *);
 * space during mmap's.
 */
 #define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4))
-#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_128TB / 4))
+#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(DEFAULT_MAP_WINDOW_USER64 / 4))

 #define TASK_UNMAPPED_BASE ((is_32bit_task()) ? \
 		TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 )
@ -143,21 +148,15 @@ void release_thread(struct task_struct *);
 * with 128TB and conditionally enable upto 512TB
 */
 #ifdef CONFIG_PPC_BOOK3S_64
-#define DEFAULT_MAP_WINDOW	((is_32bit_task()) ? \
-				 TASK_SIZE_USER32 : TASK_SIZE_128TB)
+#define DEFAULT_MAP_WINDOW	((is_32bit_task()) ?			\
+				 TASK_SIZE_USER32 : DEFAULT_MAP_WINDOW_USER64)
 #else
 #define DEFAULT_MAP_WINDOW	TASK_SIZE
 #endif

 #ifdef __powerpc64__

-#ifdef CONFIG_PPC_BOOK3S_64
-/* Limit stack to 128TB */
-#define STACK_TOP_USER64 TASK_SIZE_128TB
-#else
-#define STACK_TOP_USER64 TASK_SIZE_USER64
-#endif
-
+#define STACK_TOP_USER64 DEFAULT_MAP_WINDOW_USER64
 #define STACK_TOP_USER32 TASK_SIZE_USER32

 #define STACK_TOP (is_32bit_task() ? \
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@ -44,8 +44,22 @@ extern void __init dump_numa_cpu_topology(void);
 extern int sysfs_add_device_to_node(struct device *dev, int nid);
 extern void sysfs_remove_device_from_node(struct device *dev, int nid);

+static inline int early_cpu_to_node(int cpu)
+{
+	int nid;
+
+	nid = numa_cpu_lookup_table[cpu];
+
+	/*
+	 * Fall back to node 0 if nid is unset (it should be, except bugs).
+	 * This allows callers to safely do NODE_DATA(early_cpu_to_node(cpu)).
+	 */
+	return (nid < 0) ? 0 : nid;
+}
 #else

+static inline int early_cpu_to_node(int cpu) { return 0; }
+
 static inline void dump_numa_cpu_topology(void) {}

 static inline int sysfs_add_device_to_node(struct device *dev, int nid)
--- a/arch/powerpc/include/asm/xive.h
+++ b/arch/powerpc/include/asm/xive.h
@ -94,11 +94,13 @@ struct xive_q {
 * store at 0 and some ESBs support doing a trigger via a
 * separate trigger page.
 */
-#define XIVE_ESB_GET		0x800
-#define XIVE_ESB_SET_PQ_00	0xc00
-#define XIVE_ESB_SET_PQ_01	0xd00
-#define XIVE_ESB_SET_PQ_10	0xe00
-#define XIVE_ESB_SET_PQ_11	0xf00
+#define XIVE_ESB_STORE_EOI	0x400 /* Store */
+#define XIVE_ESB_LOAD_EOI	0x000 /* Load */
+#define XIVE_ESB_GET		0x800 /* Load */
+#define XIVE_ESB_SET_PQ_00	0xc00 /* Load */
+#define XIVE_ESB_SET_PQ_01	0xd00 /* Load */
+#define XIVE_ESB_SET_PQ_10	0xe00 /* Load */
+#define XIVE_ESB_SET_PQ_11	0xf00 /* Load */

 #define XIVE_ESB_VAL_P		0x2
 #define XIVE_ESB_VAL_Q		0x1
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@ -8,6 +8,7 @@
 #include <linux/export.h>
 #include <linux/init.h>
 #include <linux/jump_label.h>
+#include <linux/libfdt.h>
 #include <linux/memblock.h>
 #include <linux/printk.h>
 #include <linux/sched.h>
@ -642,7 +643,6 @@ static struct dt_cpu_feature_match __initdata
 	{"processor-control-facility", feat_enable_dbell, CPU_FTR_DBELL},
 	{"processor-control-facility-v3", feat_enable_dbell, CPU_FTR_DBELL},
 	{"processor-utilization-of-resources-register", feat_enable_purr, 0},
-	{"subcore", feat_enable, CPU_FTR_SUBCORE},
 	{"no-execute", feat_enable, 0},
 	{"strong-access-ordering", feat_enable, CPU_FTR_SAO},
 	{"cache-inhibited-large-page", feat_enable_large_ci, 0},
@ -671,12 +671,24 @@ static struct dt_cpu_feature_match __initdata
 	{"wait-v3", feat_enable, 0},
 };

-/* XXX: how to configure this? Default + boot time? */
-#ifdef CONFIG_PPC_CPUFEATURES_ENABLE_UNKNOWN
-#define CPU_FEATURE_ENABLE_UNKNOWN 1
-#else
-#define CPU_FEATURE_ENABLE_UNKNOWN 0
-#endif
+static bool __initdata using_dt_cpu_ftrs;
+static bool __initdata enable_unknown = true;
+
+static int __init dt_cpu_ftrs_parse(char *str)
+{
+	if (!str)
+		return 0;
+
+	if (!strcmp(str, "off"))
+		using_dt_cpu_ftrs = false;
+	else if (!strcmp(str, "known"))
+		enable_unknown = false;
+	else
+		return 1;
+
+	return 0;
+}
+early_param("dt_cpu_ftrs", dt_cpu_ftrs_parse);

 static void __init cpufeatures_setup_start(u32 isa)
 {
@ -707,7 +719,7 @@ static bool __init cpufeatures_process_feature(struct dt_cpu_feature *f)
 		}
 	}

-	if (!known && CPU_FEATURE_ENABLE_UNKNOWN) {
+	if (!known && enable_unknown) {
 		if (!feat_try_enable_unknown(f)) {
 			pr_info("not enabling: %s (unknown and unsupported by kernel)\n",
 				f->name);
@ -756,6 +768,26 @@ static void __init cpufeatures_setup_finished(void)
 		cur_cpu_spec->cpu_features, cur_cpu_spec->mmu_features);
 }

+static int __init disabled_on_cmdline(void)
+{
+	unsigned long root, chosen;
+	const char *p;
+
+	root = of_get_flat_dt_root();
+	chosen = of_get_flat_dt_subnode_by_name(root, "chosen");
+	if (chosen == -FDT_ERR_NOTFOUND)
+		return false;
+
+	p = of_get_flat_dt_prop(chosen, "bootargs", NULL);
+	if (!p)
+		return false;
+
+	if (strstr(p, "dt_cpu_ftrs=off"))
+		return true;
+
+	return false;
+}
+
 static int __init fdt_find_cpu_features(unsigned long node, const char *uname,
 					int depth, void *data)
 {
@ -766,8 +798,6 @@ static int __init fdt_find_cpu_features(unsigned long node, const char *uname,
 	return 0;
 }

-static bool __initdata using_dt_cpu_ftrs = false;
-
 bool __init dt_cpu_ftrs_in_use(void)
 {
 	return using_dt_cpu_ftrs;
@ -775,6 +805,8 @@ bool __init dt_cpu_ftrs_in_use(void)

 bool __init dt_cpu_ftrs_init(void *fdt)
 {
+	using_dt_cpu_ftrs = false;
+
 	/* Setup and verify the FDT, if it fails we just bail */
 	if (!early_init_dt_verify(fdt))
 		return false;
@ -782,6 +814,9 @@ bool __init dt_cpu_ftrs_init(void *fdt)
 	if (!of_scan_flat_dt(fdt_find_cpu_features, NULL))
 		return false;

+	if (disabled_on_cmdline())
+		return false;
+
 	cpufeatures_setup_cpu();

 	using_dt_cpu_ftrs = true;
@ -1027,5 +1062,8 @@ static int __init dt_cpu_ftrs_scan_callback(unsigned long node, const char

 void __init dt_cpu_ftrs_scan(void)
 {
+	if (!using_dt_cpu_ftrs)
+		return;
+
 	of_scan_flat_dt(dt_cpu_ftrs_scan_callback, NULL);
 }
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@ -1666,6 +1666,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 #ifdef CONFIG_VSX
 	current->thread.used_vsr = 0;
 #endif
+	current->thread.load_fp = 0;
 	memset(&current->thread.fp_state, 0, sizeof(current->thread.fp_state));
 	current->thread.fp_save_area = NULL;
 #ifdef CONFIG_ALTIVEC
@ -1674,6 +1675,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 	current->thread.vr_save_area = NULL;
 	current->thread.vrsave = 0;
 	current->thread.used_vr = 0;
+	current->thread.load_vec = 0;
 #endif /* CONFIG_ALTIVEC */
 #ifdef CONFIG_SPE
 	memset(current->thread.evr, 0, sizeof(current->thread.evr));
@ -1685,6 +1687,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 	current->thread.tm_tfhar = 0;
 	current->thread.tm_texasr = 0;
 	current->thread.tm_tfiar = 0;
+	current->thread.load_tm = 0;
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 }
 EXPORT_SYMBOL(start_thread);
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@ -928,7 +928,7 @@ void __init setup_arch(char **cmdline_p)

 #ifdef CONFIG_PPC_MM_SLICES
 #ifdef CONFIG_PPC64
-	init_mm.context.addr_limit = TASK_SIZE_128TB;
+	init_mm.context.addr_limit = DEFAULT_MAP_WINDOW_USER64;
 #else
 #error	"context.addr_limit not initialized."
 #endif
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@ -661,7 +661,7 @@ void __init emergency_stack_init(void)

 static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
 {
-	return __alloc_bootmem_node(NODE_DATA(cpu_to_node(cpu)), size, align,
+	return __alloc_bootmem_node(NODE_DATA(early_cpu_to_node(cpu)), size, align,
 				    __pa(MAX_DMA_ADDRESS));
 }

@ -672,7 +672,7 @@ static void __init pcpu_fc_free(void *ptr, size_t size)

 static int pcpu_cpu_distance(unsigned int from, unsigned int to)
 {
-	if (cpu_to_node(from) == cpu_to_node(to))
+	if (early_cpu_to_node(from) == early_cpu_to_node(to))
 		return LOCAL_DISTANCE;
 	else
 		return REMOTE_DISTANCE;
--- a/arch/powerpc/kvm/book3s_xive_template.c
+++ b/arch/powerpc/kvm/book3s_xive_template.c
@ -69,7 +69,7 @@ static void GLUE(X_PFX,source_eoi)(u32 hw_irq, struct xive_irq_data *xd)
 {
 	/* If the XIVE supports the new "store EOI facility, use it */
 	if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
-		__x_writeq(0, __x_eoi_page(xd));
+		__x_writeq(0, __x_eoi_page(xd) + XIVE_ESB_STORE_EOI);
 	else if (hw_irq && xd->flags & XIVE_IRQ_FLAG_EOI_FW) {
 		opal_int_eoi(hw_irq);
 	} else {
@ -89,7 +89,7 @@ static void GLUE(X_PFX,source_eoi)(u32 hw_irq, struct xive_irq_data *xd)
 		 * properly.
 		 */
 		if (xd->flags & XIVE_IRQ_FLAG_LSI)
-			__x_readq(__x_eoi_page(xd));
+			__x_readq(__x_eoi_page(xd) + XIVE_ESB_LOAD_EOI);
 		else {
 			eoi_val = GLUE(X_PFX,esb_load)(xd, XIVE_ESB_SET_PQ_00);

--- a/arch/powerpc/mm/hugetlbpage-radix.c
+++ b/arch/powerpc/mm/hugetlbpage-radix.c
@ -68,7 +68,7 @@ radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 		addr = ALIGN(addr, huge_page_size(h));
 		vma = find_vma(mm, addr);
 		if (mm->task_size - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 	/*
--- a/arch/powerpc/mm/mmap.c
+++ b/arch/powerpc/mm/mmap.c
@ -112,7 +112,7 @@ radix__arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		addr = PAGE_ALIGN(addr);
 		vma = find_vma(mm, addr);
 		if (mm->task_size - len >= addr && addr >= mmap_min_addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}

@ -157,7 +157,7 @@ radix__arch_get_unmapped_area_topdown(struct file *filp,
 		addr = PAGE_ALIGN(addr);
 		vma = find_vma(mm, addr);
 		if (mm->task_size - len >= addr && addr >= mmap_min_addr &&
-				(!vma || addr + len <= vma->vm_start))
+				(!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}

--- a/arch/powerpc/mm/mmu_context_book3s64.c
+++ b/arch/powerpc/mm/mmu_context_book3s64.c
@ -99,7 +99,7 @@ static int hash__init_new_context(struct mm_struct *mm)
 	 * mm->context.addr_limit. Default to max task size so that we copy the
 	 * default values to paca which will help us to handle slb miss early.
 	 */
-	mm->context.addr_limit = TASK_SIZE_128TB;
+	mm->context.addr_limit = DEFAULT_MAP_WINDOW_USER64;

 	/*
 	 * The old code would re-promote on fork, we don't do that when using
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@ -99,7 +99,7 @@ static int slice_area_is_free(struct mm_struct *mm, unsigned long addr,
 	if ((mm->task_size - len) < addr)
 		return 0;
 	vma = find_vma(mm, addr);
-	return (!vma || (addr + len) <= vma->vm_start);
+	return (!vma || (addr + len) <= vm_start_gap(vma));
 }

 static int slice_low_has_vma(struct mm_struct *mm, unsigned long slice)
--- a/arch/powerpc/perf/power9-pmu.c
+++ b/arch/powerpc/perf/power9-pmu.c
@ -402,7 +402,7 @@ static struct power_pmu power9_isa207_pmu = {
 	.name			= "POWER9",
 	.n_counter		= MAX_PMU_COUNTERS,
 	.add_fields		= ISA207_ADD_FIELDS,
-	.test_adder		= ISA207_TEST_ADDER,
+	.test_adder		= P9_DD1_TEST_ADDER,
 	.compute_mmcr		= isa207_compute_mmcr,
 	.config_bhrb		= power9_config_bhrb,
 	.bhrb_filter_map	= power9_bhrb_filter_map,
@ -421,7 +421,7 @@ static struct power_pmu power9_pmu = {
 	.name			= "POWER9",
 	.n_counter		= MAX_PMU_COUNTERS,
 	.add_fields		= ISA207_ADD_FIELDS,
-	.test_adder		= P9_DD1_TEST_ADDER,
+	.test_adder		= ISA207_TEST_ADDER,
 	.compute_mmcr		= isa207_compute_mmcr,
 	.config_bhrb		= power9_config_bhrb,
 	.bhrb_filter_map	= power9_bhrb_filter_map,
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@ -59,6 +59,17 @@ config PPC_OF_BOOT_TRAMPOLINE

 	  In case of doubt, say Y

+config PPC_DT_CPU_FTRS
+	bool "Device-tree based CPU feature discovery & setup"
+	depends on PPC_BOOK3S_64
+	default y
+	help
+	  This enables code to use a new device tree binding for describing CPU
+	  compatibility and features. Saying Y here will attempt to use the new
+	  binding if the firmware provides it. Currently only the skiboot
+	  firmware provides this binding.
+	  If you're not sure say Y.
+
 config UDBG_RTAS_CONSOLE
 	bool "RTAS based debug console"
 	depends on PPC_RTAS
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@ -175,6 +175,8 @@ static int spufs_arch_write_note(struct spu_context *ctx, int i,
 	skip = roundup(cprm->pos - total + sz, 4) - cprm->pos;
 	if (!dump_skip(cprm, skip))
 		goto Eio;
+
+	rc = 0;
 out:
 	free_page((unsigned long)buf);
 	return rc;
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ b/arch/powerpc/platforms/powernv/npu-dma.c
@ -75,7 +75,8 @@ struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index)
 	if (WARN_ON(!gpdev))
 		return NULL;

-	if (WARN_ON(!gpdev->dev.of_node))
+	/* Not all PCI devices have device-tree nodes */
+	if (!gpdev->dev.of_node)
 		return NULL;

 	/* Get assoicated PCI device */
--- a/arch/powerpc/platforms/powernv/subcore.c
+++ b/arch/powerpc/platforms/powernv/subcore.c
@ -407,7 +407,13 @@ static DEVICE_ATTR(subcores_per_core, 0644,

 static int subcore_init(void)
 {
-	if (!cpu_has_feature(CPU_FTR_SUBCORE))
+	unsigned pvr_ver;
+
+	pvr_ver = PVR_VER(mfspr(SPRN_PVR));
+
+	if (pvr_ver != PVR_POWER8 &&
+	    pvr_ver != PVR_POWER8E &&
+	    pvr_ver != PVR_POWER8NVL)
 		return 0;

 	/*
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@ -124,6 +124,7 @@ static struct property *dlpar_clone_drconf_property(struct device_node *dn)
 	for (i = 0; i < num_lmbs; i++) {
 		lmbs[i].base_addr = be64_to_cpu(lmbs[i].base_addr);
 		lmbs[i].drc_index = be32_to_cpu(lmbs[i].drc_index);
+		lmbs[i].aa_index = be32_to_cpu(lmbs[i].aa_index);
 		lmbs[i].flags = be32_to_cpu(lmbs[i].flags);
 	}

@ -147,6 +148,7 @@ static void dlpar_update_drconf_property(struct device_node *dn,
 	for (i = 0; i < num_lmbs; i++) {
 		lmbs[i].base_addr = cpu_to_be64(lmbs[i].base_addr);
 		lmbs[i].drc_index = cpu_to_be32(lmbs[i].drc_index);
+		lmbs[i].aa_index = cpu_to_be32(lmbs[i].aa_index);
 		lmbs[i].flags = cpu_to_be32(lmbs[i].flags);
 	}

--- a/arch/powerpc/sysdev/simple_gpio.c
+++ b/arch/powerpc/sysdev/simple_gpio.c
@ -75,7 +75,8 @@ static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)

 static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
 {
-	struct u8_gpio_chip *u8_gc = gpiochip_get_data(&mm_gc->gc);
+	struct u8_gpio_chip *u8_gc =
+		container_of(mm_gc, struct u8_gpio_chip, mm_gc);

 	u8_gc->data = in_8(mm_gc->regs);
 }
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@ -297,7 +297,7 @@ void xive_do_source_eoi(u32 hw_irq, struct xive_irq_data *xd)
 {
 	/* If the XIVE supports the new "store EOI facility, use it */
 	if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
-		out_be64(xd->eoi_mmio, 0);
+		out_be64(xd->eoi_mmio + XIVE_ESB_STORE_EOI, 0);
 	else if (hw_irq && xd->flags & XIVE_IRQ_FLAG_EOI_FW) {
 		/*
 		 * The FW told us to call it. This happens for some
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@ -363,9 +363,6 @@ config COMPAT
 config SYSVIPC_COMPAT
 	def_bool y if COMPAT && SYSVIPC

-config KEYS_COMPAT
-	def_bool y if COMPAT && KEYS
-
 config SMP
 	def_bool y
 	prompt "Symmetric multi-processing support"
--- a/arch/s390/configs/default_defconfig
+++ b/arch/s390/configs/default_defconfig
@ -30,6 +30,7 @@ CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
+# CONFIG_SYSFS_SYSCALL is not set
 CONFIG_BPF_SYSCALL=y
 CONFIG_USERFAULTFD=y
 # CONFIG_COMPAT_BRK is not set
@ -44,7 +45,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_BLK_WBT=y
+CONFIG_BLK_WBT_SQ=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
@ -90,6 +94,8 @@ CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=m
 CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=m
+CONFIG_SMC=m
+CONFIG_SMC_DIAG=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@ -359,6 +365,7 @@ CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_ACT_CSUM=m
 CONFIG_DNS_RESOLVER=y
+CONFIG_NETLINK_DIAG=m
 CONFIG_CGROUP_NET_PRIO=y
 CONFIG_BPF_JIT=y
 CONFIG_NET_PKTGEN=m
@ -367,16 +374,19 @@ CONFIG_DEVTMPFS=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=0
 CONFIG_CONNECTOR=y
+CONFIG_ZRAM=m
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_OSD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
+CONFIG_BLK_DEV_RAM_DAX=y
 CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_RBD=m
 CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_GENWQE=m
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
@ -442,6 +452,8 @@ CONFIG_NLMON=m
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 CONFIG_MLX4_EN=m
+CONFIG_MLX5_CORE=m
+CONFIG_MLX5_CORE_EN=y
 # CONFIG_NET_VENDOR_NATSEMI is not set
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
@ -452,7 +464,6 @@ CONFIG_PPTP=m
 CONFIG_PPPOL2TP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
@ -471,6 +482,7 @@ CONFIG_DIAG288_WATCHDOG=m
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_ACCESS=m
 CONFIG_MLX4_INFINIBAND=m
+CONFIG_MLX5_INFINIBAND=m
 CONFIG_VIRTIO_BALLOON=m
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
@ -487,12 +499,18 @@ CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
 CONFIG_XFS_DEBUG=y
 CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
 CONFIG_OCFS2_FS=m
 CONFIG_BTRFS_FS=y
 CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_BTRFS_DEBUG=y
 CONFIG_NILFS2_FS=m
+CONFIG_FS_DAX=y
+CONFIG_EXPORTFS_BLOCK_OPS=y
 CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_QUOTA_DEBUG=y
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
 CONFIG_AUTOFS4_FS=m
@ -558,6 +576,7 @@ CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_PAGEALLOC=y
+CONFIG_DEBUG_RODATA_TEST=y
 CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_OBJECTS_SELFTEST=y
 CONFIG_DEBUG_OBJECTS_FREE=y
@ -580,7 +599,6 @@ CONFIG_DETECT_HUNG_TASK=y
 CONFIG_WQ_WATCHDOG=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_DEBUG_TIMEKEEPING=y
-CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
 CONFIG_PROVE_LOCKING=y
@ -595,6 +613,7 @@ CONFIG_RCU_TORTURE_TEST=m
 CONFIG_RCU_CPU_STALL_TIMEOUT=300
 CONFIG_NOTIFIER_ERROR_INJECTION=m
 CONFIG_PM_NOTIFIER_ERROR_INJECT=m
+CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m
 CONFIG_FAULT_INJECTION=y
 CONFIG_FAILSLAB=y
 CONFIG_FAIL_PAGE_ALLOC=y
@ -616,13 +635,12 @@ CONFIG_HIST_TRIGGERS=y
 CONFIG_TRACE_ENUM_MAP_FILE=y
 CONFIG_LKDTM=m
 CONFIG_TEST_LIST_SORT=y
+CONFIG_TEST_SORT=y
 CONFIG_KPROBES_SANITY_TEST=y
 CONFIG_RBTREE_TEST=y
 CONFIG_INTERVAL_TREE_TEST=m
 CONFIG_PERCPU_TEST=m
 CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_TEST_STRING_HELPERS=y
-CONFIG_TEST_KSTRTOX=y
 CONFIG_DMA_API_DEBUG=y
 CONFIG_TEST_BPF=m
 CONFIG_BUG_ON_DATA_CORRUPTION=y
@ -630,6 +648,7 @@ CONFIG_S390_PTDUMP=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
+CONFIG_HARDENED_USERCOPY=y
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
@ -640,7 +659,9 @@ CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_PCRYPT=m
 CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
@ -648,6 +669,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_CRC32=m
@ -657,8 +679,10 @@ CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@ -674,6 +698,7 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
+CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
@ -685,6 +710,7 @@ CONFIG_CRYPTO_SHA256_S390=m
 CONFIG_CRYPTO_SHA512_S390=m
 CONFIG_CRYPTO_DES_S390=m
 CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_PAES_S390=m
 CONFIG_CRYPTO_GHASH_S390=m
 CONFIG_CRYPTO_CRC32_S390=y
 CONFIG_ASYMMETRIC_KEY_TYPE=y
@ -692,6 +718,7 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
 CONFIG_X509_CERTIFICATE_PARSER=m
 CONFIG_CRC7=m
 CONFIG_CRC8=m
+CONFIG_RANDOM32_SELFTEST=y
 CONFIG_CORDIC=m
 CONFIG_CMM=m
 CONFIG_APPLDATA_BASE=y
--- a/arch/s390/configs/gcov_defconfig
+++ b/arch/s390/configs/gcov_defconfig
@ -31,6 +31,7 @@ CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
+# CONFIG_SYSFS_SYSCALL is not set
 CONFIG_BPF_SYSCALL=y
 CONFIG_USERFAULTFD=y
 # CONFIG_COMPAT_BRK is not set
@ -46,7 +47,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_BLK_WBT=y
+CONFIG_BLK_WBT_SQ=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
@ -88,6 +92,8 @@ CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=m
 CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=m
+CONFIG_SMC=m
+CONFIG_SMC_DIAG=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@ -356,6 +362,7 @@ CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_ACT_CSUM=m
 CONFIG_DNS_RESOLVER=y
+CONFIG_NETLINK_DIAG=m
 CONFIG_CGROUP_NET_PRIO=y
 CONFIG_BPF_JIT=y
 CONFIG_NET_PKTGEN=m
@ -364,16 +371,18 @@ CONFIG_DEVTMPFS=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=0
 CONFIG_CONNECTOR=y
+CONFIG_ZRAM=m
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_OSD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
+CONFIG_BLK_DEV_RAM_DAX=y
 CONFIG_VIRTIO_BLK=y
 CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_GENWQE=m
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
@ -439,6 +448,8 @@ CONFIG_NLMON=m
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 CONFIG_MLX4_EN=m
+CONFIG_MLX5_CORE=m
+CONFIG_MLX5_CORE_EN=y
 # CONFIG_NET_VENDOR_NATSEMI is not set
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
@ -449,7 +460,6 @@ CONFIG_PPTP=m
 CONFIG_PPPOL2TP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
@ -468,6 +478,7 @@ CONFIG_DIAG288_WATCHDOG=m
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_ACCESS=m
 CONFIG_MLX4_INFINIBAND=m
+CONFIG_MLX5_INFINIBAND=m
 CONFIG_VIRTIO_BALLOON=m
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
@ -483,11 +494,15 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
 CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
 CONFIG_OCFS2_FS=m
 CONFIG_BTRFS_FS=y
 CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_NILFS2_FS=m
+CONFIG_FS_DAX=y
+CONFIG_EXPORTFS_BLOCK_OPS=y
 CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
@ -553,7 +568,6 @@ CONFIG_UNUSED_SYMBOLS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_PANIC_ON_OOPS=y
-CONFIG_TIMER_STATS=y
 CONFIG_RCU_TORTURE_TEST=m
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_LATENCYTOP=y
@ -576,6 +590,7 @@ CONFIG_BIG_KEYS=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
+CONFIG_HARDENED_USERCOPY=y
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
@ -599,6 +614,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_CRC32=m
@ -611,6 +627,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@ -626,16 +643,19 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
+CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 CONFIG_ZCRYPT=m
+CONFIG_PKEY=m
 CONFIG_CRYPTO_SHA1_S390=m
 CONFIG_CRYPTO_SHA256_S390=m
 CONFIG_CRYPTO_SHA512_S390=m
 CONFIG_CRYPTO_DES_S390=m
 CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_PAES_S390=m
 CONFIG_CRYPTO_GHASH_S390=m
 CONFIG_CRYPTO_CRC32_S390=y
 CONFIG_CRC7=m
--- a/arch/s390/configs/performance_defconfig
+++ b/arch/s390/configs/performance_defconfig
@ -31,6 +31,7 @@ CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
+# CONFIG_SYSFS_SYSCALL is not set
 CONFIG_BPF_SYSCALL=y
 CONFIG_USERFAULTFD=y
 # CONFIG_COMPAT_BRK is not set
@ -44,7 +45,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_BLK_WBT=y
+CONFIG_BLK_WBT_SQ=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
@ -86,6 +90,8 @@ CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=m
 CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=m
+CONFIG_SMC=m
+CONFIG_SMC_DIAG=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@ -354,6 +360,7 @@ CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_ACT_CSUM=m
 CONFIG_DNS_RESOLVER=y
+CONFIG_NETLINK_DIAG=m
 CONFIG_CGROUP_NET_PRIO=y
 CONFIG_BPF_JIT=y
 CONFIG_NET_PKTGEN=m
@ -362,16 +369,18 @@ CONFIG_DEVTMPFS=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=0
 CONFIG_CONNECTOR=y
+CONFIG_ZRAM=m
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_OSD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
+CONFIG_BLK_DEV_RAM_DAX=y
 CONFIG_VIRTIO_BLK=y
 CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_GENWQE=m
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
@ -437,6 +446,8 @@ CONFIG_NLMON=m
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 CONFIG_MLX4_EN=m
+CONFIG_MLX5_CORE=m
+CONFIG_MLX5_CORE_EN=y
 # CONFIG_NET_VENDOR_NATSEMI is not set
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
@ -447,7 +458,6 @@ CONFIG_PPTP=m
 CONFIG_PPPOL2TP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
@ -466,6 +476,7 @@ CONFIG_DIAG288_WATCHDOG=m
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_ACCESS=m
 CONFIG_MLX4_INFINIBAND=m
+CONFIG_MLX5_INFINIBAND=m
 CONFIG_VIRTIO_BALLOON=m
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
@ -481,11 +492,15 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
 CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
 CONFIG_OCFS2_FS=m
 CONFIG_BTRFS_FS=y
 CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_NILFS2_FS=m
+CONFIG_FS_DAX=y
+CONFIG_EXPORTFS_BLOCK_OPS=y
 CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
@ -551,7 +566,6 @@ CONFIG_UNUSED_SYMBOLS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_PANIC_ON_OOPS=y
-CONFIG_TIMER_STATS=y
 CONFIG_RCU_TORTURE_TEST=m
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_LATENCYTOP=y
@ -574,6 +588,7 @@ CONFIG_BIG_KEYS=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
+CONFIG_HARDENED_USERCOPY=y
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
@ -597,6 +612,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_CRC32=m
@ -609,6 +625,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@ -624,6 +641,7 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
+CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
@ -635,6 +653,7 @@ CONFIG_CRYPTO_SHA256_S390=m
 CONFIG_CRYPTO_SHA512_S390=m
 CONFIG_CRYPTO_DES_S390=m
 CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_PAES_S390=m
 CONFIG_CRYPTO_GHASH_S390=m
 CONFIG_CRYPTO_CRC32_S390=y
 CONFIG_CRC7=m
--- a/arch/s390/configs/zfcpdump_defconfig
+++ b/arch/s390/configs/zfcpdump_defconfig
@ -12,8 +12,10 @@ CONFIG_TUNE_ZEC12=y
 CONFIG_NR_CPUS=2
 # CONFIG_HOTPLUG_CPU is not set
 CONFIG_HZ_100=y
+# CONFIG_ARCH_RANDOM is not set
 # CONFIG_COMPACTION is not set
 # CONFIG_MIGRATION is not set
+# CONFIG_BOUNCE is not set
 # CONFIG_CHECK_STACK is not set
 # CONFIG_CHSC_SCH is not set
 # CONFIG_SCM_BUS is not set
@ -36,11 +38,11 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_ZFCP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_HVC_IUCV is not set
+# CONFIG_HW_RANDOM_S390 is not set
 CONFIG_RAW_DRIVER=y
 # CONFIG_SCLP_ASYNC is not set
 # CONFIG_HMC_DRV is not set
@ -54,9 +56,9 @@ CONFIG_RAW_DRIVER=y
 # CONFIG_INOTIFY_USER is not set
 CONFIG_CONFIGFS_FS=y
 # CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_PANIC_ON_OOPS=y
 # CONFIG_SCHED_DEBUG is not set
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@ -28,6 +28,7 @@ CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
+# CONFIG_SYSFS_SYSCALL is not set
 CONFIG_BPF_SYSCALL=y
 CONFIG_USERFAULTFD=y
 # CONFIG_COMPAT_BRK is not set
@ -108,7 +109,6 @@ CONFIG_ZFCP=y
 CONFIG_SCSI_VIRTIO=y
 CONFIG_MD=y
 CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_BLK_DEV_DM=y
 CONFIG_DM_CRYPT=m
@ -131,6 +131,7 @@ CONFIG_TUN=m
 CONFIG_VIRTIO_NET=y
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 CONFIG_DEVKMEM=y
@ -162,7 +163,6 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_PAGEALLOC=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_PANIC_ON_OOPS=y
-CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_LOCK_STAT=y
@ -172,14 +172,12 @@ CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
 CONFIG_DEBUG_NOTIFIERS=y
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
-CONFIG_RCU_TRACE=y
 CONFIG_LATENCYTOP=y
 CONFIG_SCHED_TRACER=y
 CONFIG_FTRACE_SYSCALLS=y
 CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
 CONFIG_STACK_TRACER=y
 CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_UPROBE_EVENTS=y
 CONFIG_FUNCTION_PROFILER=y
 CONFIG_TRACE_ENUM_MAP_FILE=y
 CONFIG_KPROBES_SANITY_TEST=y
@ -190,7 +188,6 @@ CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
@ -230,6 +227,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_ZCRYPT=m
 CONFIG_PKEY=m
+CONFIG_CRYPTO_PAES_S390=m
 CONFIG_CRYPTO_SHA1_S390=m
 CONFIG_CRYPTO_SHA256_S390=m
 CONFIG_CRYPTO_SHA512_S390=m
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@ -541,7 +541,6 @@ struct kvm_s390_float_interrupt {
 	struct mutex ais_lock;
 	u8 simm;
 	u8 nimm;
-	int ais_enabled;
 };

 struct kvm_hw_wp_info_arch {
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@ -231,12 +231,17 @@ ENTRY(sie64a)
 	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
 .Lsie_done:
 # some program checks are suppressing. C code (e.g. do_protection_exception)
-# will rewind the PSW by the ILC, which is 4 bytes in case of SIE. Other
-# instructions between sie64a and .Lsie_done should not cause program
-# interrupts. So lets use a nop (47 00 00 00) as a landing pad.
+# will rewind the PSW by the ILC, which is often 4 bytes in case of SIE. There
+# are some corner cases (e.g. runtime instrumentation) where ILC is unpredictable.
+# Other instructions between sie64a and .Lsie_done should not cause program
+# interrupts. So lets use 3 nops as a landing pad for all possible rewinds.
 # See also .Lcleanup_sie
-.Lrewind_pad:
-	nop	0
+.Lrewind_pad6:
+	nopr	7
+.Lrewind_pad4:
+	nopr	7
+.Lrewind_pad2:
+	nopr	7
 	.globl sie_exit
 sie_exit:
 	lg	%r14,__SF_EMPTY+8(%r15)		# load guest register save area
@ -249,7 +254,9 @@ sie_exit:
 	stg	%r14,__SF_EMPTY+16(%r15)	# set exit reason code
 	j	sie_exit

-	EX_TABLE(.Lrewind_pad,.Lsie_fault)
+	EX_TABLE(.Lrewind_pad6,.Lsie_fault)
+	EX_TABLE(.Lrewind_pad4,.Lsie_fault)
+	EX_TABLE(.Lrewind_pad2,.Lsie_fault)
 	EX_TABLE(sie_exit,.Lsie_fault)
 EXPORT_SYMBOL(sie64a)
 EXPORT_SYMBOL(sie_exit)
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@ -2160,7 +2160,7 @@ static int modify_ais_mode(struct kvm *kvm, struct kvm_device_attr *attr)
 	struct kvm_s390_ais_req req;
 	int ret = 0;

-	if (!fi->ais_enabled)
+	if (!test_kvm_facility(kvm, 72))
 		return -ENOTSUPP;

 	if (copy_from_user(&req, (void __user *)attr->addr, sizeof(req)))
@ -2204,7 +2204,7 @@ static int kvm_s390_inject_airq(struct kvm *kvm,
 	};
 	int ret = 0;

-	if (!fi->ais_enabled || !adapter->suppressible)
+	if (!test_kvm_facility(kvm, 72) || !adapter->suppressible)
 		return kvm_s390_inject_vm(kvm, &s390int);

 	mutex_lock(&fi->ais_lock);
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@ -558,7 +558,6 @@ static int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap)
 		} else {
 			set_kvm_facility(kvm->arch.model.fac_mask, 72);
 			set_kvm_facility(kvm->arch.model.fac_list, 72);
-			kvm->arch.float_int.ais_enabled = 1;
 			r = 0;
 		}
 		mutex_unlock(&kvm->lock);
@ -1533,7 +1532,6 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	mutex_init(&kvm->arch.float_int.ais_lock);
 	kvm->arch.float_int.simm = 0;
 	kvm->arch.float_int.nimm = 0;
-	kvm->arch.float_int.ais_enabled = 0;
 	spin_lock_init(&kvm->arch.float_int.lock);
 	for (i = 0; i < FIRQ_LIST_COUNT; i++)
 		INIT_LIST_HEAD(&kvm->arch.float_int.lists[i]);
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@ -101,7 +101,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		addr = PAGE_ALIGN(addr);
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr && addr >= mmap_min_addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			goto check_asce_limit;
 	}

@ -151,7 +151,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 		addr = PAGE_ALIGN(addr);
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr && addr >= mmap_min_addr &&
-				(!vma || addr + len <= vma->vm_start))
+				(!vma || addr + len <= vm_start_gap(vma)))
 			goto check_asce_limit;
 	}

--- a/arch/sh/mm/mmap.c
+++ b/arch/sh/mm/mmap.c
@ -64,7 +64,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,

 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}

@ -114,7 +114,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,

 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}

--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@ -192,9 +192,9 @@ config NR_CPUS
 	int "Maximum number of CPUs"
 	depends on SMP
 	range 2 32 if SPARC32
-	range 2 1024 if SPARC64
+	range 2 4096 if SPARC64
 	default 32 if SPARC32
-	default 64 if SPARC64
+	default 4096 if SPARC64

 source kernel/Kconfig.hz

@ -295,9 +295,13 @@ config NUMA
 	depends on SPARC64 && SMP

 config NODES_SHIFT
-	int
-	default "4"
+	int "Maximum NUMA Nodes (as a power of 2)"
+	range 4 5 if SPARC64
+	default "5"
 	depends on NEED_MULTIPLE_NODES
+	help
+	  Specify the maximum number of NUMA Nodes available on the target
+	  system.  Increases memory reserved to accommodate various tables.

 # Some NUMA nodes have memory ranges that span
 # other nodes.  Even though a pfn is valid and
@ -573,9 +577,6 @@ config SYSVIPC_COMPAT
 	depends on COMPAT && SYSVIPC
 	default y

-config KEYS_COMPAT
-	def_bool y if COMPAT && KEYS
-
 endmenu

 source "net/Kconfig"
--- a/arch/sparc/include/asm/mmu_64.h
+++ b/arch/sparc/include/asm/mmu_64.h
@ -52,7 +52,7 @@
 #define CTX_NR_MASK		TAG_CONTEXT_BITS
 #define CTX_HW_MASK		(CTX_NR_MASK | CTX_PGSZ_MASK)

-#define CTX_FIRST_VERSION	((_AC(1,UL) << CTX_VERSION_SHIFT) + _AC(1,UL))
+#define CTX_FIRST_VERSION	BIT(CTX_VERSION_SHIFT)
 #define CTX_VALID(__ctx)	\
 	 (!(((__ctx.sparc64_ctx_val) ^ tlb_context_cache) & CTX_VERSION_MASK))
 #define CTX_HWBITS(__ctx)	((__ctx.sparc64_ctx_val) & CTX_HW_MASK)
--- a/arch/sparc/include/asm/mmu_context_64.h
+++ b/arch/sparc/include/asm/mmu_context_64.h
@ -19,13 +19,8 @@ extern spinlock_t ctx_alloc_lock;
 extern unsigned long tlb_context_cache;
 extern unsigned long mmu_context_bmap[];

+DECLARE_PER_CPU(struct mm_struct *, per_cpu_secondary_mm);
 void get_new_mmu_context(struct mm_struct *mm);
-#ifdef CONFIG_SMP
-void smp_new_mmu_context_version(void);
-#else
-#define smp_new_mmu_context_version() do { } while (0)
-#endif
-
 int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
 void destroy_context(struct mm_struct *mm);

@ -76,8 +71,9 @@ void __flush_tlb_mm(unsigned long, unsigned long);
 static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk)
 {
 	unsigned long ctx_valid, flags;
-	int cpu;
+	int cpu = smp_processor_id();

+	per_cpu(per_cpu_secondary_mm, cpu) = mm;
 	if (unlikely(mm == &init_mm))
 		return;

@ -123,7 +119,6 @@ static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, str
 	 * for the first time, we must flush that context out of the
 	 * local TLB.
 	 */
-	cpu = smp_processor_id();
 	if (!ctx_valid || !cpumask_test_cpu(cpu, mm_cpumask(mm))) {
 		cpumask_set_cpu(cpu, mm_cpumask(mm));
 		__flush_tlb_mm(CTX_HWBITS(mm->context),
@ -133,26 +128,7 @@ static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, str
 }

 #define deactivate_mm(tsk,mm)	do { } while (0)
-
-/* Activate a new MM instance for the current task. */
-static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm)
-{
-	unsigned long flags;
-	int cpu;
-
-	spin_lock_irqsave(&mm->context.lock, flags);
-	if (!CTX_VALID(mm->context))
-		get_new_mmu_context(mm);
-	cpu = smp_processor_id();
-	if (!cpumask_test_cpu(cpu, mm_cpumask(mm)))
-		cpumask_set_cpu(cpu, mm_cpumask(mm));
-
-	load_secondary_context(mm);
-	__flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT);
-	tsb_context_switch(mm);
-	spin_unlock_irqrestore(&mm->context.lock, flags);
-}
-
+#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, NULL)
 #endif /* !(__ASSEMBLY__) */

 #endif /* !(__SPARC64_MMU_CONTEXT_H) */
--- a/arch/sparc/include/asm/pil.h
+++ b/arch/sparc/include/asm/pil.h
@ -20,7 +20,6 @@
 #define PIL_SMP_CALL_FUNC	1
 #define PIL_SMP_RECEIVE_SIGNAL	2
 #define PIL_SMP_CAPTURE		3
-#define PIL_SMP_CTX_NEW_VERSION	4
 #define PIL_DEVICE_IRQ		5
 #define PIL_SMP_CALL_FUNC_SNGL	6
 #define PIL_DEFERRED_PCR_WORK	7
--- a/arch/sparc/include/asm/vio.h
+++ b/arch/sparc/include/asm/vio.h
@ -327,6 +327,7 @@ struct vio_dev {
 	int			compat_len;

 	u64			dev_no;
+	u64			id;

 	unsigned long		channel_id;

--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@ -909,7 +909,7 @@ static int register_services(struct ds_info *dp)
 		pbuf.req.handle = cp->handle;
 		pbuf.req.major = 1;
 		pbuf.req.minor = 0;
-		strcpy(pbuf.req.svc_id, cp->service_id);
+		strcpy(pbuf.id_buf, cp->service_id);

 		err = __ds_send(lp, &pbuf, msg_len);
 		if (err > 0)
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@ -1034,17 +1034,26 @@ static void __init init_cpu_send_mondo_info(struct trap_per_cpu *tb)
 {
 #ifdef CONFIG_SMP
 	unsigned long page;
+	void *mondo, *p;

-	BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64));
+	BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > PAGE_SIZE);
+
+	/* Make sure mondo block is 64byte aligned */
+	p = kzalloc(127, GFP_KERNEL);
+	if (!p) {
+		prom_printf("SUN4V: Error, cannot allocate mondo block.\n");
+		prom_halt();
+	}
+	mondo = (void *)(((unsigned long)p + 63) & ~0x3f);
+	tb->cpu_mondo_block_pa = __pa(mondo);

 	page = get_zeroed_page(GFP_KERNEL);
 	if (!page) {
-		prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n");
+		prom_printf("SUN4V: Error, cannot allocate cpu list page.\n");
 		prom_halt();
 	}

-	tb->cpu_mondo_block_pa = __pa(page);
-	tb->cpu_list_pa = __pa(page + 64);
+	tb->cpu_list_pa = __pa(page);
 #endif
 }

--- a/arch/sparc/kernel/kernel.h
+++ b/arch/sparc/kernel/kernel.h
@ -37,7 +37,6 @@ void handle_stdfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr
 /* smp_64.c */
 void __irq_entry smp_call_function_client(int irq, struct pt_regs *regs);
 void __irq_entry smp_call_function_single_client(int irq, struct pt_regs *regs);
-void __irq_entry smp_new_mmu_context_version_client(int irq, struct pt_regs *regs);
 void __irq_entry smp_penguin_jailcell(int irq, struct pt_regs *regs);
 void __irq_entry smp_receive_signal_client(int irq, struct pt_regs *regs);

--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@ -964,37 +964,6 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page)
 	preempt_enable();
 }

-void __irq_entry smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
-{
-	struct mm_struct *mm;
-	unsigned long flags;
-
-	clear_softint(1 << irq);
-
-	/* See if we need to allocate a new TLB context because
-	 * the version of the one we are using is now out of date.
-	 */
-	mm = current->active_mm;
-	if (unlikely(!mm || (mm == &init_mm)))
-		return;
-
-	spin_lock_irqsave(&mm->context.lock, flags);
-
-	if (unlikely(!CTX_VALID(mm->context)))
-		get_new_mmu_context(mm);
-
-	spin_unlock_irqrestore(&mm->context.lock, flags);
-
-	load_secondary_context(mm);
-	__flush_tlb_mm(CTX_HWBITS(mm->context),
-		       SECONDARY_CONTEXT);
-}
-
-void smp_new_mmu_context_version(void)
-{
-	smp_cross_call(&xcall_new_mmu_context_version, 0, 0, 0);
-}
-
 #ifdef CONFIG_KGDB
 void kgdb_roundup_cpus(unsigned long flags)
 {
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@ -120,7 +120,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi

 		vma = find_vma(mm, addr);
 		if (task_size - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}

@ -183,7 +183,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,

 		vma = find_vma(mm, addr);
 		if (task_size - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}

--- a/arch/sparc/kernel/tsb.S
+++ b/arch/sparc/kernel/tsb.S
@ -455,13 +455,16 @@ __tsb_context_switch:
 	.type	copy_tsb,#function
 copy_tsb:		/* %o0=old_tsb_base, %o1=old_tsb_size
 			 * %o2=new_tsb_base, %o3=new_tsb_size
+			 * %o4=page_size_shift
 			 */
 	sethi		%uhi(TSB_PASS_BITS), %g7
 	srlx		%o3, 4, %o3
-	add		%o0, %o1, %g1	/* end of old tsb */
+	add		%o0, %o1, %o1	/* end of old tsb */
 	sllx		%g7, 32, %g7
 	sub		%o3, 1, %o3	/* %o3 == new tsb hash mask */

+	mov		%o4, %g1	/* page_size_shift */
+
 661:	prefetcha	[%o0] ASI_N, #one_read
 	.section	.tsb_phys_patch, "ax"
 	.word		661b
@ -486,9 +489,9 @@ copy_tsb:		/* %o0=old_tsb_base, %o1=old_tsb_size
 	/* This can definitely be computed faster... */
 	srlx		%o0, 4, %o5	/* Build index */
 	and		%o5, 511, %o5	/* Mask index */
-	sllx		%o5, PAGE_SHIFT, %o5 /* Put into vaddr position */
+	sllx		%o5, %g1, %o5	/* Put into vaddr position */
 	or		%o4, %o5, %o4	/* Full VADDR. */
-	srlx		%o4, PAGE_SHIFT, %o4 /* Shift down to create index */
+	srlx		%o4, %g1, %o4	/* Shift down to create index */
 	and		%o4, %o3, %o4	/* Mask with new_tsb_nents-1 */
 	sllx		%o4, 4, %o4	/* Shift back up into tsb ent offset */
 	TSB_STORE(%o2 + %o4, %g2)	/* Store TAG */
@ -496,7 +499,7 @@ copy_tsb:		/* %o0=old_tsb_base, %o1=old_tsb_size
 	TSB_STORE(%o2 + %o4, %g3)	/* Store TTE */

 80:	add		%o0, 16, %o0
-	cmp		%o0, %g1
+	cmp		%o0, %o1
 	bne,pt		%xcc, 90b
 	 nop

--- a/arch/sparc/kernel/ttable_64.S
+++ b/arch/sparc/kernel/ttable_64.S
@ -50,7 +50,7 @@ tl0_resv03e:	BTRAP(0x3e) BTRAP(0x3f) BTRAP(0x40)
 tl0_irq1:	TRAP_IRQ(smp_call_function_client, 1)
 tl0_irq2:	TRAP_IRQ(smp_receive_signal_client, 2)
 tl0_irq3:	TRAP_IRQ(smp_penguin_jailcell, 3)
-tl0_irq4:	TRAP_IRQ(smp_new_mmu_context_version_client, 4)
+tl0_irq4:       BTRAP(0x44)
 #else
 tl0_irq1:	BTRAP(0x41)
 tl0_irq2:	BTRAP(0x42)
--- a/Show More
+++ b/Show More