mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-09 18:16:40 +07:00
net: mvpp2: initialize the GoP
The patch adds GoP (group of ports) initialization functions. The mvpp2 driver was relying on the firmware/bootloader initialization; this patch moves this setup to the mvpp2 driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
76eb1b1de5
commit
f84bf386f3
@ -18,6 +18,7 @@
|
||||
#include <linux/inetdevice.h>
|
||||
#include <linux/mbus.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mfd/syscon.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/cpumask.h>
|
||||
#include <linux/of.h>
|
||||
@ -30,6 +31,7 @@
|
||||
#include <linux/clk.h>
|
||||
#include <linux/hrtimer.h>
|
||||
#include <linux/ktime.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <uapi/linux/ppp_defs.h>
|
||||
#include <net/ip.h>
|
||||
#include <net/ipv6.h>
|
||||
@ -388,6 +390,38 @@
|
||||
#define MVPP2_QUEUE_NEXT_DESC(q, index) \
|
||||
(((index) < (q)->last_desc) ? ((index) + 1) : 0)
|
||||
|
||||
/* XPCS registers. PPv2.2 only */
|
||||
#define MVPP22_MPCS_BASE(port) (0x7000 + (port) * 0x1000)
|
||||
#define MVPP22_MPCS_CTRL 0x14
|
||||
#define MVPP22_MPCS_CTRL_FWD_ERR_CONN BIT(10)
|
||||
#define MVPP22_MPCS_CLK_RESET 0x14c
|
||||
#define MAC_CLK_RESET_SD_TX BIT(0)
|
||||
#define MAC_CLK_RESET_SD_RX BIT(1)
|
||||
#define MAC_CLK_RESET_MAC BIT(2)
|
||||
#define MVPP22_MPCS_CLK_RESET_DIV_RATIO(n) ((n) << 4)
|
||||
#define MVPP22_MPCS_CLK_RESET_DIV_SET BIT(11)
|
||||
|
||||
/* XPCS registers. PPv2.2 only */
|
||||
#define MVPP22_XPCS_BASE(port) (0x7400 + (port) * 0x1000)
|
||||
#define MVPP22_XPCS_CFG0 0x0
|
||||
#define MVPP22_XPCS_CFG0_PCS_MODE(n) ((n) << 3)
|
||||
#define MVPP22_XPCS_CFG0_ACTIVE_LANE(n) ((n) << 5)
|
||||
|
||||
/* System controller registers. Accessed through a regmap. */
|
||||
#define GENCONF_SOFT_RESET1 0x1108
|
||||
#define GENCONF_SOFT_RESET1_GOP BIT(6)
|
||||
#define GENCONF_PORT_CTRL0 0x1110
|
||||
#define GENCONF_PORT_CTRL0_BUS_WIDTH_SELECT BIT(1)
|
||||
#define GENCONF_PORT_CTRL0_RX_DATA_SAMPLE BIT(29)
|
||||
#define GENCONF_PORT_CTRL0_CLK_DIV_PHASE_CLR BIT(31)
|
||||
#define GENCONF_PORT_CTRL1 0x1114
|
||||
#define GENCONF_PORT_CTRL1_EN(p) BIT(p)
|
||||
#define GENCONF_PORT_CTRL1_RESET(p) (BIT(p) << 28)
|
||||
#define GENCONF_CTRL0 0x1120
|
||||
#define GENCONF_CTRL0_PORT0_RGMII BIT(0)
|
||||
#define GENCONF_CTRL0_PORT1_RGMII_MII BIT(1)
|
||||
#define GENCONF_CTRL0_PORT1_RGMII BIT(2)
|
||||
|
||||
/* Various constants */
|
||||
|
||||
/* Coalescing */
|
||||
@ -731,6 +765,11 @@ struct mvpp2 {
|
||||
*/
|
||||
void __iomem *swth_base[MVPP2_MAX_THREADS];
|
||||
|
||||
/* On PPv2.2, some port control registers are located into the system
|
||||
* controller space. These registers are accessible through a regmap.
|
||||
*/
|
||||
struct regmap *sysctrl_base;
|
||||
|
||||
/* Common clocks */
|
||||
struct clk *pp_clk;
|
||||
struct clk *gop_clk;
|
||||
@ -4259,6 +4298,123 @@ mvpp2_shared_interrupt_mask_unmask(struct mvpp2_port *port, bool mask)
|
||||
|
||||
/* Port configuration routines */
|
||||
|
||||
static void mvpp22_gop_init_rgmii(struct mvpp2_port *port)
|
||||
{
|
||||
struct mvpp2 *priv = port->priv;
|
||||
u32 val;
|
||||
|
||||
regmap_read(priv->sysctrl_base, GENCONF_PORT_CTRL0, &val);
|
||||
val |= GENCONF_PORT_CTRL0_BUS_WIDTH_SELECT;
|
||||
regmap_write(priv->sysctrl_base, GENCONF_PORT_CTRL0, val);
|
||||
|
||||
regmap_read(priv->sysctrl_base, GENCONF_CTRL0, &val);
|
||||
if (port->gop_id == 2)
|
||||
val |= GENCONF_CTRL0_PORT0_RGMII | GENCONF_CTRL0_PORT1_RGMII;
|
||||
else if (port->gop_id == 3)
|
||||
val |= GENCONF_CTRL0_PORT1_RGMII_MII;
|
||||
regmap_write(priv->sysctrl_base, GENCONF_CTRL0, val);
|
||||
}
|
||||
|
||||
static void mvpp22_gop_init_sgmii(struct mvpp2_port *port)
|
||||
{
|
||||
struct mvpp2 *priv = port->priv;
|
||||
u32 val;
|
||||
|
||||
regmap_read(priv->sysctrl_base, GENCONF_PORT_CTRL0, &val);
|
||||
val |= GENCONF_PORT_CTRL0_BUS_WIDTH_SELECT |
|
||||
GENCONF_PORT_CTRL0_RX_DATA_SAMPLE;
|
||||
regmap_write(priv->sysctrl_base, GENCONF_PORT_CTRL0, val);
|
||||
|
||||
if (port->gop_id > 1) {
|
||||
regmap_read(priv->sysctrl_base, GENCONF_CTRL0, &val);
|
||||
if (port->gop_id == 2)
|
||||
val &= ~GENCONF_CTRL0_PORT0_RGMII;
|
||||
else if (port->gop_id == 3)
|
||||
val &= ~GENCONF_CTRL0_PORT1_RGMII_MII;
|
||||
regmap_write(priv->sysctrl_base, GENCONF_CTRL0, val);
|
||||
}
|
||||
}
|
||||
|
||||
static void mvpp22_gop_init_10gkr(struct mvpp2_port *port)
|
||||
{
|
||||
struct mvpp2 *priv = port->priv;
|
||||
void __iomem *mpcs = priv->iface_base + MVPP22_MPCS_BASE(port->gop_id);
|
||||
void __iomem *xpcs = priv->iface_base + MVPP22_XPCS_BASE(port->gop_id);
|
||||
u32 val;
|
||||
|
||||
/* XPCS */
|
||||
val = readl(xpcs + MVPP22_XPCS_CFG0);
|
||||
val &= ~(MVPP22_XPCS_CFG0_PCS_MODE(0x3) |
|
||||
MVPP22_XPCS_CFG0_ACTIVE_LANE(0x3));
|
||||
val |= MVPP22_XPCS_CFG0_ACTIVE_LANE(2);
|
||||
writel(val, xpcs + MVPP22_XPCS_CFG0);
|
||||
|
||||
/* MPCS */
|
||||
val = readl(mpcs + MVPP22_MPCS_CTRL);
|
||||
val &= ~MVPP22_MPCS_CTRL_FWD_ERR_CONN;
|
||||
writel(val, mpcs + MVPP22_MPCS_CTRL);
|
||||
|
||||
val = readl(mpcs + MVPP22_MPCS_CLK_RESET);
|
||||
val &= ~(MVPP22_MPCS_CLK_RESET_DIV_RATIO(0x7) | MAC_CLK_RESET_MAC |
|
||||
MAC_CLK_RESET_SD_RX | MAC_CLK_RESET_SD_TX);
|
||||
val |= MVPP22_MPCS_CLK_RESET_DIV_RATIO(1);
|
||||
writel(val, mpcs + MVPP22_MPCS_CLK_RESET);
|
||||
|
||||
val &= ~MVPP22_MPCS_CLK_RESET_DIV_SET;
|
||||
val |= MAC_CLK_RESET_MAC | MAC_CLK_RESET_SD_RX | MAC_CLK_RESET_SD_TX;
|
||||
writel(val, mpcs + MVPP22_MPCS_CLK_RESET);
|
||||
}
|
||||
|
||||
static int mvpp22_gop_init(struct mvpp2_port *port)
|
||||
{
|
||||
struct mvpp2 *priv = port->priv;
|
||||
u32 val;
|
||||
|
||||
if (!priv->sysctrl_base)
|
||||
return 0;
|
||||
|
||||
switch (port->phy_interface) {
|
||||
case PHY_INTERFACE_MODE_RGMII:
|
||||
case PHY_INTERFACE_MODE_RGMII_ID:
|
||||
case PHY_INTERFACE_MODE_RGMII_RXID:
|
||||
case PHY_INTERFACE_MODE_RGMII_TXID:
|
||||
if (port->gop_id == 0)
|
||||
goto invalid_conf;
|
||||
mvpp22_gop_init_rgmii(port);
|
||||
break;
|
||||
case PHY_INTERFACE_MODE_SGMII:
|
||||
mvpp22_gop_init_sgmii(port);
|
||||
break;
|
||||
case PHY_INTERFACE_MODE_10GKR:
|
||||
if (port->gop_id != 0)
|
||||
goto invalid_conf;
|
||||
mvpp22_gop_init_10gkr(port);
|
||||
break;
|
||||
default:
|
||||
goto unsupported_conf;
|
||||
}
|
||||
|
||||
regmap_read(priv->sysctrl_base, GENCONF_PORT_CTRL1, &val);
|
||||
val |= GENCONF_PORT_CTRL1_RESET(port->gop_id) |
|
||||
GENCONF_PORT_CTRL1_EN(port->gop_id);
|
||||
regmap_write(priv->sysctrl_base, GENCONF_PORT_CTRL1, val);
|
||||
|
||||
regmap_read(priv->sysctrl_base, GENCONF_PORT_CTRL0, &val);
|
||||
val |= GENCONF_PORT_CTRL0_CLK_DIV_PHASE_CLR;
|
||||
regmap_write(priv->sysctrl_base, GENCONF_PORT_CTRL0, val);
|
||||
|
||||
regmap_read(priv->sysctrl_base, GENCONF_SOFT_RESET1, &val);
|
||||
val |= GENCONF_SOFT_RESET1_GOP;
|
||||
regmap_write(priv->sysctrl_base, GENCONF_SOFT_RESET1, val);
|
||||
|
||||
unsupported_conf:
|
||||
return 0;
|
||||
|
||||
invalid_conf:
|
||||
netdev_err(port->dev, "Invalid port configuration\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static void mvpp2_port_mii_gmac_configure_mode(struct mvpp2_port *port)
|
||||
{
|
||||
u32 val;
|
||||
@ -6105,6 +6261,9 @@ static void mvpp2_start_dev(struct mvpp2_port *port)
|
||||
/* Enable interrupts on all CPUs */
|
||||
mvpp2_interrupts_enable(port);
|
||||
|
||||
if (port->priv->hw_version == MVPP22)
|
||||
mvpp22_gop_init(port);
|
||||
|
||||
mvpp2_port_mii_set(port);
|
||||
mvpp2_port_enable(port);
|
||||
phy_start(ndev->phydev);
|
||||
@ -7350,6 +7509,17 @@ static int mvpp2_probe(struct platform_device *pdev)
|
||||
priv->iface_base = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(priv->iface_base))
|
||||
return PTR_ERR(priv->iface_base);
|
||||
|
||||
priv->sysctrl_base =
|
||||
syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
|
||||
"marvell,system-controller");
|
||||
if (IS_ERR(priv->sysctrl_base))
|
||||
/* The system controller regmap is optional for dt
|
||||
* compatibility reasons. When not provided, the
|
||||
* configuration of the GoP relies on the
|
||||
* firmware/bootloader.
|
||||
*/
|
||||
priv->sysctrl_base = NULL;
|
||||
}
|
||||
|
||||
for (i = 0; i < MVPP2_MAX_THREADS; i++) {
|
||||
|
Loading…
Reference in New Issue
Block a user