gpio: Add AXP209 GPIO driver

The AXP209 PMIC has a bunch of GPIOs accessible, that are usually used to
control LEDs or backlight.

Add a driver for them

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Maxime Ripard 2016-07-20 16:11:36 +02:00 committed by Linus Walleij
parent e23efa3111
commit f72f4b44df
4 changed files with 199 additions and 0 deletions

View File

@ -0,0 +1,30 @@
AXP209 GPIO controller
This driver follows the usual GPIO bindings found in
Documentation/devicetree/bindings/gpio/gpio.txt
Required properties:
- compatible: Should be "x-powers,axp209-gpio"
- #gpio-cells: Should be two. The first cell is the pin number and the
second is the GPIO flags.
- gpio-controller: Marks the device node as a GPIO controller.
This node must be a subnode of the axp20x PMIC, documented in
Documentation/devicetree/bindings/mfd/axp20x.txt
Example:
axp209: pmic@34 {
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
axp_gpio: gpio {
compatible = "x-powers,axp209-gpio";
gpio-controller;
#gpio-cells = <2>;
};
};

View File

@ -116,6 +116,12 @@ config GPIO_ATH79
Select this option to enable GPIO driver for
Atheros AR71XX/AR724X/AR913X SoC devices.
config GPIO_AXP209
tristate "X-Powers AXP209 PMIC GPIO Support"
depends on MFD_AXP20X
help
Say yes to enable GPIO support for the AXP209 PMIC
config GPIO_BCM_KONA
bool "Broadcom Kona GPIO"
depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)

View File

@ -28,6 +28,7 @@ obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o
obj-$(CONFIG_GPIO_AXP209) += gpio-axp209.o
obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o

162
drivers/gpio/gpio-axp209.c Normal file
View File

@ -0,0 +1,162 @@
/*
* AXP20x GPIO driver
*
* Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/gpio/driver.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/axp20x.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#define AXP20X_GPIO_FUNCTIONS 0x7
#define AXP20X_GPIO_FUNCTION_OUT_LOW 0
#define AXP20X_GPIO_FUNCTION_OUT_HIGH 1
#define AXP20X_GPIO_FUNCTION_INPUT 2
struct axp20x_gpio {
struct gpio_chip chip;
struct regmap *regmap;
};
static int axp20x_gpio_get_reg(unsigned offset)
{
switch (offset) {
case 0:
return AXP20X_GPIO0_CTRL;
case 1:
return AXP20X_GPIO1_CTRL;
case 2:
return AXP20X_GPIO2_CTRL;
}
return -EINVAL;
}
static int axp20x_gpio_input(struct gpio_chip *chip, unsigned offset)
{
struct axp20x_gpio *gpio = gpiochip_get_data(chip);
int reg;
reg = axp20x_gpio_get_reg(offset);
if (reg < 0)
return reg;
return regmap_update_bits(gpio->regmap, reg,
AXP20X_GPIO_FUNCTIONS,
AXP20X_GPIO_FUNCTION_INPUT);
}
static int axp20x_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct axp20x_gpio *gpio = gpiochip_get_data(chip);
unsigned int val;
int reg, ret;
reg = axp20x_gpio_get_reg(offset);
if (reg < 0)
return reg;
ret = regmap_read(gpio->regmap, reg, &val);
if (ret)
return ret;
return !!(val & BIT(offset + 4));
}
static int axp20x_gpio_output(struct gpio_chip *chip, unsigned offset,
int value)
{
struct axp20x_gpio *gpio = gpiochip_get_data(chip);
int reg;
reg = axp20x_gpio_get_reg(offset);
if (reg < 0)
return reg;
return regmap_update_bits(gpio->regmap, reg,
AXP20X_GPIO_FUNCTIONS,
value ? AXP20X_GPIO_FUNCTION_OUT_HIGH
: AXP20X_GPIO_FUNCTION_OUT_LOW);
}
static void axp20x_gpio_set(struct gpio_chip *chip, unsigned offset,
int value)
{
axp20x_gpio_output(chip, offset, value);
}
static int axp20x_gpio_probe(struct platform_device *pdev)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
struct axp20x_gpio *gpio;
int ret;
if (!of_device_is_available(pdev->dev.of_node))
return -ENODEV;
if (!axp20x) {
dev_err(&pdev->dev, "Parent drvdata not set\n");
return -EINVAL;
}
gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
if (!gpio)
return -ENOMEM;
gpio->chip.base = -1;
gpio->chip.can_sleep = true;
gpio->chip.parent = &pdev->dev;
gpio->chip.label = dev_name(&pdev->dev);
gpio->chip.owner = THIS_MODULE;
gpio->chip.get = axp20x_gpio_get;
gpio->chip.set = axp20x_gpio_set;
gpio->chip.direction_input = axp20x_gpio_input;
gpio->chip.direction_output = axp20x_gpio_output;
gpio->chip.ngpio = 3;
gpio->regmap = axp20x->regmap;
ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
if (ret) {
dev_err(&pdev->dev, "Failed to register GPIO chip\n");
return ret;
}
dev_info(&pdev->dev, "AXP209 GPIO driver loaded\n");
return 0;
}
static const struct of_device_id axp20x_gpio_match[] = {
{ .compatible = "x-powers,axp209-gpio" },
{ }
};
MODULE_DEVICE_TABLE(of, axp20x_gpio_match);
static struct platform_driver axp20x_gpio_driver = {
.probe = axp20x_gpio_probe,
.driver = {
.name = "axp20x-gpio",
.of_match_table = axp20x_gpio_match,
},
};
module_platform_driver(axp20x_gpio_driver);
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
MODULE_DESCRIPTION("AXP20x PMIC GPIO driver");
MODULE_LICENSE("GPL");