mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 06:20:53 +07:00
i2c: npcm7xx: Add support for slave mode for Nuvoton
Add support for slave mode for Nuvoton NPCM BMC I2C controller driver. Signed-off-by: Tali Perry <tali.perry1@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
This commit is contained in:
Tali Perry
Wolfram Sang
parent
56a1485b10
commit
f54736925a
@ -71,6 +71,24 @@ enum i2c_state {
|
||||
I2C_STOP_PENDING,
|
||||
};
|
||||
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
/* Module supports setting multiple own slave addresses */
|
||||
enum i2c_addr {
|
||||
I2C_SLAVE_ADDR1 = 0,
|
||||
I2C_SLAVE_ADDR2,
|
||||
I2C_SLAVE_ADDR3,
|
||||
I2C_SLAVE_ADDR4,
|
||||
I2C_SLAVE_ADDR5,
|
||||
I2C_SLAVE_ADDR6,
|
||||
I2C_SLAVE_ADDR7,
|
||||
I2C_SLAVE_ADDR8,
|
||||
I2C_SLAVE_ADDR9,
|
||||
I2C_SLAVE_ADDR10,
|
||||
I2C_GC_ADDR,
|
||||
I2C_ARP_ADDR,
|
||||
};
|
||||
#endif
|
||||
|
||||
/* init register and default value required to enable module */
|
||||
#define NPCM_I2CSEGCTL 0xE4
|
||||
#define NPCM_I2CSEGCTL_INIT_VAL 0x0333F000
|
||||
@ -98,6 +116,21 @@ enum i2c_state {
|
||||
#define NPCM_I2CADDR6 0x16
|
||||
#define NPCM_I2CADDR10 0x17
|
||||
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
/*
|
||||
* npcm_i2caddr array:
|
||||
* The module supports having multiple own slave addresses.
|
||||
* Since the addr regs are sprinkled all over the address space,
|
||||
* use this array to get the address or each register.
|
||||
*/
|
||||
#define I2C_NUM_OWN_ADDR 10
|
||||
const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = {
|
||||
NPCM_I2CADDR1, NPCM_I2CADDR2, NPCM_I2CADDR3, NPCM_I2CADDR4,
|
||||
NPCM_I2CADDR5, NPCM_I2CADDR6, NPCM_I2CADDR7, NPCM_I2CADDR8,
|
||||
NPCM_I2CADDR9, NPCM_I2CADDR10,
|
||||
};
|
||||
#endif
|
||||
|
||||
#define NPCM_I2CCTL4 0x1A
|
||||
#define NPCM_I2CCTL5 0x1B
|
||||
#define NPCM_I2CSCLLT 0x1C /* SCL Low Time */
|
||||
@ -265,6 +298,16 @@ struct npcm_i2c {
|
||||
bool read_block_use;
|
||||
unsigned long int_time_stamp;
|
||||
unsigned long bus_freq; /* in Hz */
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
u8 own_slave_addr;
|
||||
struct i2c_client *slave;
|
||||
int slv_rd_size;
|
||||
int slv_rd_ind;
|
||||
int slv_wr_size;
|
||||
int slv_wr_ind;
|
||||
u8 slv_rd_buf[I2C_HW_FIFO_SIZE];
|
||||
u8 slv_wr_buf[I2C_HW_FIFO_SIZE];
|
||||
#endif
|
||||
struct dentry *debugfs; /* debugfs device directory */
|
||||
u64 ber_cnt;
|
||||
u64 rec_succ_cnt;
|
||||
@ -296,6 +339,10 @@ static void npcm_i2c_init_params(struct npcm_i2c *bus)
|
||||
bus->int_time_stamp = 0;
|
||||
bus->PEC_use = false;
|
||||
bus->PEC_mask = 0;
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
if (bus->slave)
|
||||
bus->master_or_slave = I2C_SLAVE;
|
||||
#endif
|
||||
}
|
||||
|
||||
static inline void npcm_i2c_wr_byte(struct npcm_i2c *bus, u8 data)
|
||||
@ -341,6 +388,18 @@ static void npcm_i2c_disable(struct npcm_i2c *bus)
|
||||
{
|
||||
u8 i2cctl2;
|
||||
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
int i;
|
||||
|
||||
/* select bank 0 for I2C addresses */
|
||||
npcm_i2c_select_bank(bus, I2C_BANK_0);
|
||||
|
||||
/* Slave addresses removal */
|
||||
for (i = I2C_SLAVE_ADDR1; i < I2C_NUM_OWN_ADDR; i++)
|
||||
iowrite8(0, bus->reg + npcm_i2caddr[i]);
|
||||
|
||||
npcm_i2c_select_bank(bus, I2C_BANK_1);
|
||||
#endif
|
||||
/* Disable module */
|
||||
i2cctl2 = ioread8(bus->reg + NPCM_I2CCTL2);
|
||||
i2cctl2 = i2cctl2 & ~I2CCTL2_ENABLE;
|
||||
@ -504,6 +563,61 @@ static inline void npcm_i2c_nack(struct npcm_i2c *bus)
|
||||
iowrite8(val, bus->reg + NPCM_I2CCTL1);
|
||||
}
|
||||
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
static void npcm_i2c_slave_int_enable(struct npcm_i2c *bus, bool enable)
|
||||
{
|
||||
u8 i2cctl1;
|
||||
|
||||
/* enable interrupt on slave match: */
|
||||
i2cctl1 = ioread8(bus->reg + NPCM_I2CCTL1);
|
||||
i2cctl1 &= ~NPCM_I2CCTL1_RWS;
|
||||
if (enable)
|
||||
i2cctl1 |= NPCM_I2CCTL1_NMINTE;
|
||||
else
|
||||
i2cctl1 &= ~NPCM_I2CCTL1_NMINTE;
|
||||
iowrite8(i2cctl1, bus->reg + NPCM_I2CCTL1);
|
||||
}
|
||||
|
||||
static int npcm_i2c_slave_enable(struct npcm_i2c *bus, enum i2c_addr addr_type,
|
||||
u8 addr, bool enable)
|
||||
{
|
||||
u8 i2cctl1;
|
||||
u8 i2cctl3;
|
||||
u8 sa_reg;
|
||||
|
||||
sa_reg = (addr & 0x7F) | FIELD_PREP(NPCM_I2CADDR_SAEN, enable);
|
||||
if (addr_type == I2C_GC_ADDR) {
|
||||
i2cctl1 = ioread8(bus->reg + NPCM_I2CCTL1);
|
||||
if (enable)
|
||||
i2cctl1 |= NPCM_I2CCTL1_GCMEN;
|
||||
else
|
||||
i2cctl1 &= ~NPCM_I2CCTL1_GCMEN;
|
||||
iowrite8(i2cctl1, bus->reg + NPCM_I2CCTL1);
|
||||
return 0;
|
||||
}
|
||||
if (addr_type == I2C_ARP_ADDR) {
|
||||
i2cctl3 = ioread8(bus->reg + NPCM_I2CCTL3);
|
||||
if (enable)
|
||||
i2cctl3 |= I2CCTL3_ARPMEN;
|
||||
else
|
||||
i2cctl3 &= ~I2CCTL3_ARPMEN;
|
||||
iowrite8(i2cctl3, bus->reg + NPCM_I2CCTL3);
|
||||
return 0;
|
||||
}
|
||||
if (addr_type >= I2C_ARP_ADDR)
|
||||
return -EFAULT;
|
||||
/* select bank 0 for address 3 to 10 */
|
||||
if (addr_type > I2C_SLAVE_ADDR2)
|
||||
npcm_i2c_select_bank(bus, I2C_BANK_0);
|
||||
/* Set and enable the address */
|
||||
iowrite8(sa_reg, bus->reg + npcm_i2caddr[addr_type]);
|
||||
npcm_i2c_slave_int_enable(bus, enable);
|
||||
if (addr_type > I2C_SLAVE_ADDR2)
|
||||
npcm_i2c_select_bank(bus, I2C_BANK_1);
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static void npcm_i2c_reset(struct npcm_i2c *bus)
|
||||
{
|
||||
/*
|
||||
@ -511,6 +625,9 @@ static void npcm_i2c_reset(struct npcm_i2c *bus)
|
||||
* is disabled.
|
||||
*/
|
||||
u8 i2cctl1;
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
u8 addr;
|
||||
#endif
|
||||
|
||||
i2cctl1 = ioread8(bus->reg + NPCM_I2CCTL1);
|
||||
|
||||
@ -531,6 +648,13 @@ static void npcm_i2c_reset(struct npcm_i2c *bus)
|
||||
/* Clear all fifo bits: */
|
||||
iowrite8(NPCM_I2CFIF_CTS_CLR_FIFO, bus->reg + NPCM_I2CFIF_CTS);
|
||||
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
if (bus->slave) {
|
||||
addr = bus->slave->addr;
|
||||
npcm_i2c_slave_enable(bus, I2C_SLAVE_ADDR1, addr, true);
|
||||
}
|
||||
#endif
|
||||
|
||||
bus->state = I2C_IDLE;
|
||||
}
|
||||
|
||||
@ -596,6 +720,10 @@ static void npcm_i2c_callback(struct npcm_i2c *bus,
|
||||
}
|
||||
|
||||
bus->operation = I2C_NO_OPER;
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
if (bus->slave)
|
||||
bus->master_or_slave = I2C_SLAVE;
|
||||
#endif
|
||||
}
|
||||
|
||||
static u8 npcm_i2c_fifo_usage(struct npcm_i2c *bus)
|
||||
@ -707,6 +835,459 @@ static void npcm_i2c_master_abort(struct npcm_i2c *bus)
|
||||
npcm_i2c_clear_master_status(bus);
|
||||
}
|
||||
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
static u8 npcm_i2c_get_slave_addr(struct npcm_i2c *bus, enum i2c_addr addr_type)
|
||||
{
|
||||
u8 slave_add;
|
||||
|
||||
/* select bank 0 for address 3 to 10 */
|
||||
if (addr_type > I2C_SLAVE_ADDR2)
|
||||
npcm_i2c_select_bank(bus, I2C_BANK_0);
|
||||
|
||||
slave_add = ioread8(bus->reg + npcm_i2caddr[(int)addr_type]);
|
||||
|
||||
if (addr_type > I2C_SLAVE_ADDR2)
|
||||
npcm_i2c_select_bank(bus, I2C_BANK_1);
|
||||
|
||||
return slave_add;
|
||||
}
|
||||
|
||||
static int npcm_i2c_remove_slave_addr(struct npcm_i2c *bus, u8 slave_add)
|
||||
{
|
||||
int i;
|
||||
|
||||
/* Set the enable bit */
|
||||
slave_add |= 0x80;
|
||||
npcm_i2c_select_bank(bus, I2C_BANK_0);
|
||||
for (i = I2C_SLAVE_ADDR1; i < I2C_NUM_OWN_ADDR; i++) {
|
||||
if (ioread8(bus->reg + npcm_i2caddr[i]) == slave_add)
|
||||
iowrite8(0, bus->reg + npcm_i2caddr[i]);
|
||||
}
|
||||
npcm_i2c_select_bank(bus, I2C_BANK_1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void npcm_i2c_write_fifo_slave(struct npcm_i2c *bus, u16 max_bytes)
|
||||
{
|
||||
/*
|
||||
* Fill the FIFO, while the FIFO is not full and there are more bytes
|
||||
* to write
|
||||
*/
|
||||
npcm_i2c_clear_fifo_int(bus);
|
||||
npcm_i2c_clear_tx_fifo(bus);
|
||||
iowrite8(0, bus->reg + NPCM_I2CTXF_CTL);
|
||||
while (max_bytes-- && I2C_HW_FIFO_SIZE != npcm_i2c_fifo_usage(bus)) {
|
||||
if (bus->slv_wr_size <= 0)
|
||||
break;
|
||||
bus->slv_wr_ind = bus->slv_wr_ind % I2C_HW_FIFO_SIZE;
|
||||
npcm_i2c_wr_byte(bus, bus->slv_wr_buf[bus->slv_wr_ind]);
|
||||
bus->slv_wr_ind++;
|
||||
bus->slv_wr_ind = bus->slv_wr_ind % I2C_HW_FIFO_SIZE;
|
||||
bus->slv_wr_size--;
|
||||
}
|
||||
}
|
||||
|
||||
static void npcm_i2c_read_fifo_slave(struct npcm_i2c *bus, u8 bytes_in_fifo)
|
||||
{
|
||||
u8 data;
|
||||
|
||||
if (!bus->slave)
|
||||
return;
|
||||
|
||||
while (bytes_in_fifo--) {
|
||||
data = npcm_i2c_rd_byte(bus);
|
||||
|
||||
bus->slv_rd_ind = bus->slv_rd_ind % I2C_HW_FIFO_SIZE;
|
||||
bus->slv_rd_buf[bus->slv_rd_ind] = data;
|
||||
bus->slv_rd_ind++;
|
||||
|
||||
/* 1st byte is length in block protocol: */
|
||||
if (bus->slv_rd_ind == 1 && bus->read_block_use)
|
||||
bus->slv_rd_size = data + bus->PEC_use + 1;
|
||||
}
|
||||
}
|
||||
|
||||
static int npcm_i2c_slave_get_wr_buf(struct npcm_i2c *bus)
|
||||
{
|
||||
int i;
|
||||
u8 value;
|
||||
int ind;
|
||||
int ret = bus->slv_wr_ind;
|
||||
|
||||
/* fill a cyclic buffer */
|
||||
for (i = 0; i < I2C_HW_FIFO_SIZE; i++) {
|
||||
if (bus->slv_wr_size >= I2C_HW_FIFO_SIZE)
|
||||
break;
|
||||
i2c_slave_event(bus->slave, I2C_SLAVE_READ_REQUESTED, &value);
|
||||
ind = (bus->slv_wr_ind + bus->slv_wr_size) % I2C_HW_FIFO_SIZE;
|
||||
bus->slv_wr_buf[ind] = value;
|
||||
bus->slv_wr_size++;
|
||||
i2c_slave_event(bus->slave, I2C_SLAVE_READ_PROCESSED, &value);
|
||||
}
|
||||
return I2C_HW_FIFO_SIZE - ret;
|
||||
}
|
||||
|
||||
static void npcm_i2c_slave_send_rd_buf(struct npcm_i2c *bus)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < bus->slv_rd_ind; i++)
|
||||
i2c_slave_event(bus->slave, I2C_SLAVE_WRITE_RECEIVED,
|
||||
&bus->slv_rd_buf[i]);
|
||||
/*
|
||||
* once we send bytes up, need to reset the counter of the wr buf
|
||||
* got data from master (new offset in device), ignore wr fifo:
|
||||
*/
|
||||
if (bus->slv_rd_ind) {
|
||||
bus->slv_wr_size = 0;
|
||||
bus->slv_wr_ind = 0;
|
||||
}
|
||||
|
||||
bus->slv_rd_ind = 0;
|
||||
bus->slv_rd_size = bus->adap.quirks->max_read_len;
|
||||
|
||||
npcm_i2c_clear_fifo_int(bus);
|
||||
npcm_i2c_clear_rx_fifo(bus);
|
||||
}
|
||||
|
||||
static void npcm_i2c_slave_receive(struct npcm_i2c *bus, u16 nread,
|
||||
u8 *read_data)
|
||||
{
|
||||
bus->state = I2C_OPER_STARTED;
|
||||
bus->operation = I2C_READ_OPER;
|
||||
bus->slv_rd_size = nread;
|
||||
bus->slv_rd_ind = 0;
|
||||
|
||||
iowrite8(0, bus->reg + NPCM_I2CTXF_CTL);
|
||||
iowrite8(I2C_HW_FIFO_SIZE, bus->reg + NPCM_I2CRXF_CTL);
|
||||
npcm_i2c_clear_tx_fifo(bus);
|
||||
npcm_i2c_clear_rx_fifo(bus);
|
||||
}
|
||||
|
||||
static void npcm_i2c_slave_xmit(struct npcm_i2c *bus, u16 nwrite,
|
||||
u8 *write_data)
|
||||
{
|
||||
if (nwrite == 0)
|
||||
return;
|
||||
|
||||
bus->state = I2C_OPER_STARTED;
|
||||
bus->operation = I2C_WRITE_OPER;
|
||||
|
||||
/* get the next buffer */
|
||||
npcm_i2c_slave_get_wr_buf(bus);
|
||||
npcm_i2c_write_fifo_slave(bus, nwrite);
|
||||
}
|
||||
|
||||
/*
|
||||
* npcm_i2c_slave_wr_buf_sync:
|
||||
* currently slave IF only supports single byte operations.
|
||||
* in order to utilyze the npcm HW FIFO, the driver will ask for 16 bytes
|
||||
* at a time, pack them in buffer, and then transmit them all together
|
||||
* to the FIFO and onward to the bus.
|
||||
* NACK on read will be once reached to bus->adap->quirks->max_read_len.
|
||||
* sending a NACK wherever the backend requests for it is not supported.
|
||||
* the next two functions allow reading to local buffer before writing it all
|
||||
* to the HW FIFO.
|
||||
*/
|
||||
static void npcm_i2c_slave_wr_buf_sync(struct npcm_i2c *bus)
|
||||
{
|
||||
int left_in_fifo;
|
||||
|
||||
left_in_fifo = FIELD_GET(NPCM_I2CTXF_STS_TX_BYTES,
|
||||
ioread8(bus->reg + NPCM_I2CTXF_STS));
|
||||
|
||||
/* fifo already full: */
|
||||
if (left_in_fifo >= I2C_HW_FIFO_SIZE ||
|
||||
bus->slv_wr_size >= I2C_HW_FIFO_SIZE)
|
||||
return;
|
||||
|
||||
/* update the wr fifo index back to the untransmitted bytes: */
|
||||
bus->slv_wr_ind = bus->slv_wr_ind - left_in_fifo;
|
||||
bus->slv_wr_size = bus->slv_wr_size + left_in_fifo;
|
||||
|
||||
if (bus->slv_wr_ind < 0)
|
||||
bus->slv_wr_ind += I2C_HW_FIFO_SIZE;
|
||||
}
|
||||
|
||||
static void npcm_i2c_slave_rd_wr(struct npcm_i2c *bus)
|
||||
{
|
||||
if (NPCM_I2CST_XMIT & ioread8(bus->reg + NPCM_I2CST)) {
|
||||
/*
|
||||
* Slave got an address match with direction bit 1 so it should
|
||||
* transmit data. Write till the master will NACK
|
||||
*/
|
||||
bus->operation = I2C_WRITE_OPER;
|
||||
npcm_i2c_slave_xmit(bus, bus->adap.quirks->max_write_len,
|
||||
bus->slv_wr_buf);
|
||||
} else {
|
||||
/*
|
||||
* Slave got an address match with direction bit 0 so it should
|
||||
* receive data.
|
||||
* this module does not support saying no to bytes.
|
||||
* it will always ACK.
|
||||
*/
|
||||
bus->operation = I2C_READ_OPER;
|
||||
npcm_i2c_read_fifo_slave(bus, npcm_i2c_fifo_usage(bus));
|
||||
bus->stop_ind = I2C_SLAVE_RCV_IND;
|
||||
npcm_i2c_slave_send_rd_buf(bus);
|
||||
npcm_i2c_slave_receive(bus, bus->adap.quirks->max_read_len,
|
||||
bus->slv_rd_buf);
|
||||
}
|
||||
}
|
||||
|
||||
static irqreturn_t npcm_i2c_int_slave_handler(struct npcm_i2c *bus)
|
||||
{
|
||||
u8 val;
|
||||
irqreturn_t ret = IRQ_NONE;
|
||||
u8 i2cst = ioread8(bus->reg + NPCM_I2CST);
|
||||
|
||||
/* Slave: A NACK has occurred */
|
||||
if (NPCM_I2CST_NEGACK & i2cst) {
|
||||
bus->stop_ind = I2C_NACK_IND;
|
||||
npcm_i2c_slave_wr_buf_sync(bus);
|
||||
if (bus->fifo_use)
|
||||
/* clear the FIFO */
|
||||
iowrite8(NPCM_I2CFIF_CTS_CLR_FIFO,
|
||||
bus->reg + NPCM_I2CFIF_CTS);
|
||||
|
||||
/* In slave write, NACK is OK, otherwise it is a problem */
|
||||
bus->stop_ind = I2C_NO_STATUS_IND;
|
||||
bus->operation = I2C_NO_OPER;
|
||||
bus->own_slave_addr = 0xFF;
|
||||
|
||||
/*
|
||||
* Slave has to wait for STOP to decide this is the end
|
||||
* of the transaction. tx is not yet considered as done
|
||||
*/
|
||||
iowrite8(NPCM_I2CST_NEGACK, bus->reg + NPCM_I2CST);
|
||||
|
||||
ret = IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/* Slave mode: a Bus Error (BER) has been identified */
|
||||
if (NPCM_I2CST_BER & i2cst) {
|
||||
/*
|
||||
* Check whether bus arbitration or Start or Stop during data
|
||||
* xfer bus arbitration problem should not result in recovery
|
||||
*/
|
||||
bus->stop_ind = I2C_BUS_ERR_IND;
|
||||
|
||||
/* wait for bus busy before clear fifo */
|
||||
iowrite8(NPCM_I2CFIF_CTS_CLR_FIFO, bus->reg + NPCM_I2CFIF_CTS);
|
||||
|
||||
bus->state = I2C_IDLE;
|
||||
|
||||
/*
|
||||
* in BER case we might get 2 interrupts: one for slave one for
|
||||
* master ( for a channel which is master\slave switching)
|
||||
*/
|
||||
if (completion_done(&bus->cmd_complete) == false) {
|
||||
bus->cmd_err = -EIO;
|
||||
complete(&bus->cmd_complete);
|
||||
}
|
||||
bus->own_slave_addr = 0xFF;
|
||||
iowrite8(NPCM_I2CST_BER, bus->reg + NPCM_I2CST);
|
||||
ret = IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/* A Slave Stop Condition has been identified */
|
||||
if (NPCM_I2CST_SLVSTP & i2cst) {
|
||||
u8 bytes_in_fifo = npcm_i2c_fifo_usage(bus);
|
||||
|
||||
bus->stop_ind = I2C_SLAVE_DONE_IND;
|
||||
|
||||
if (bus->operation == I2C_READ_OPER)
|
||||
npcm_i2c_read_fifo_slave(bus, bytes_in_fifo);
|
||||
|
||||
/* if the buffer is empty nothing will be sent */
|
||||
npcm_i2c_slave_send_rd_buf(bus);
|
||||
|
||||
/* Slave done transmitting or receiving */
|
||||
bus->stop_ind = I2C_NO_STATUS_IND;
|
||||
|
||||
/*
|
||||
* Note, just because we got here, it doesn't mean we through
|
||||
* away the wr buffer.
|
||||
* we keep it until the next received offset.
|
||||
*/
|
||||
bus->operation = I2C_NO_OPER;
|
||||
bus->own_slave_addr = 0xFF;
|
||||
i2c_slave_event(bus->slave, I2C_SLAVE_STOP, 0);
|
||||
iowrite8(NPCM_I2CST_SLVSTP, bus->reg + NPCM_I2CST);
|
||||
if (bus->fifo_use) {
|
||||
npcm_i2c_clear_fifo_int(bus);
|
||||
npcm_i2c_clear_rx_fifo(bus);
|
||||
npcm_i2c_clear_tx_fifo(bus);
|
||||
|
||||
iowrite8(NPCM_I2CFIF_CTS_CLR_FIFO,
|
||||
bus->reg + NPCM_I2CFIF_CTS);
|
||||
}
|
||||
bus->state = I2C_IDLE;
|
||||
ret = IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/* restart condition occurred and Rx-FIFO was not empty */
|
||||
if (bus->fifo_use && FIELD_GET(NPCM_I2CFIF_CTS_SLVRSTR,
|
||||
ioread8(bus->reg + NPCM_I2CFIF_CTS))) {
|
||||
bus->stop_ind = I2C_SLAVE_RESTART_IND;
|
||||
bus->master_or_slave = I2C_SLAVE;
|
||||
if (bus->operation == I2C_READ_OPER)
|
||||
npcm_i2c_read_fifo_slave(bus, npcm_i2c_fifo_usage(bus));
|
||||
bus->operation = I2C_WRITE_OPER;
|
||||
iowrite8(0, bus->reg + NPCM_I2CRXF_CTL);
|
||||
val = NPCM_I2CFIF_CTS_CLR_FIFO | NPCM_I2CFIF_CTS_SLVRSTR |
|
||||
NPCM_I2CFIF_CTS_RXF_TXE;
|
||||
iowrite8(val, bus->reg + NPCM_I2CFIF_CTS);
|
||||
npcm_i2c_slave_rd_wr(bus);
|
||||
ret = IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/* A Slave Address Match has been identified */
|
||||
if (NPCM_I2CST_NMATCH & i2cst) {
|
||||
u8 info = 0;
|
||||
|
||||
/* Address match automatically implies slave mode */
|
||||
bus->master_or_slave = I2C_SLAVE;
|
||||
npcm_i2c_clear_fifo_int(bus);
|
||||
npcm_i2c_clear_rx_fifo(bus);
|
||||
npcm_i2c_clear_tx_fifo(bus);
|
||||
iowrite8(0, bus->reg + NPCM_I2CTXF_CTL);
|
||||
iowrite8(I2C_HW_FIFO_SIZE, bus->reg + NPCM_I2CRXF_CTL);
|
||||
if (NPCM_I2CST_XMIT & i2cst) {
|
||||
bus->operation = I2C_WRITE_OPER;
|
||||
} else {
|
||||
i2c_slave_event(bus->slave, I2C_SLAVE_WRITE_REQUESTED,
|
||||
&info);
|
||||
bus->operation = I2C_READ_OPER;
|
||||
}
|
||||
if (bus->own_slave_addr == 0xFF) {
|
||||
/* Check which type of address match */
|
||||
val = ioread8(bus->reg + NPCM_I2CCST);
|
||||
if (NPCM_I2CCST_MATCH & val) {
|
||||
u16 addr;
|
||||
enum i2c_addr eaddr;
|
||||
u8 i2ccst2;
|
||||
u8 i2ccst3;
|
||||
|
||||
i2ccst3 = ioread8(bus->reg + NPCM_I2CCST3);
|
||||
i2ccst2 = ioread8(bus->reg + NPCM_I2CCST2);
|
||||
|
||||
/*
|
||||
* the i2c module can response to 10 own SA.
|
||||
* check which one was addressed by the master.
|
||||
* repond to the first one.
|
||||
*/
|
||||
addr = ((i2ccst3 & 0x07) << 7) |
|
||||
(i2ccst2 & 0x7F);
|
||||
info = ffs(addr);
|
||||
eaddr = (enum i2c_addr)info;
|
||||
addr = npcm_i2c_get_slave_addr(bus, eaddr);
|
||||
addr &= 0x7F;
|
||||
bus->own_slave_addr = addr;
|
||||
if (bus->PEC_mask & BIT(info))
|
||||
bus->PEC_use = true;
|
||||
else
|
||||
bus->PEC_use = false;
|
||||
} else {
|
||||
if (NPCM_I2CCST_GCMATCH & val)
|
||||
bus->own_slave_addr = 0;
|
||||
if (NPCM_I2CCST_ARPMATCH & val)
|
||||
bus->own_slave_addr = 0x61;
|
||||
}
|
||||
} else {
|
||||
/*
|
||||
* Slave match can happen in two options:
|
||||
* 1. Start, SA, read (slave read without further ado)
|
||||
* 2. Start, SA, read, data, restart, SA, read, ...
|
||||
* (slave read in fragmented mode)
|
||||
* 3. Start, SA, write, data, restart, SA, read, ..
|
||||
* (regular write-read mode)
|
||||
*/
|
||||
if ((bus->state == I2C_OPER_STARTED &&
|
||||
bus->operation == I2C_READ_OPER &&
|
||||
bus->stop_ind == I2C_SLAVE_XMIT_IND) ||
|
||||
bus->stop_ind == I2C_SLAVE_RCV_IND) {
|
||||
/* slave tx after slave rx w/o STOP */
|
||||
bus->stop_ind = I2C_SLAVE_RESTART_IND;
|
||||
}
|
||||
}
|
||||
|
||||
if (NPCM_I2CST_XMIT & i2cst)
|
||||
bus->stop_ind = I2C_SLAVE_XMIT_IND;
|
||||
else
|
||||
bus->stop_ind = I2C_SLAVE_RCV_IND;
|
||||
bus->state = I2C_SLAVE_MATCH;
|
||||
npcm_i2c_slave_rd_wr(bus);
|
||||
iowrite8(NPCM_I2CST_NMATCH, bus->reg + NPCM_I2CST);
|
||||
ret = IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/* Slave SDA status is set - tx or rx */
|
||||
if ((NPCM_I2CST_SDAST & i2cst) ||
|
||||
(bus->fifo_use &&
|
||||
(npcm_i2c_tx_fifo_empty(bus) || npcm_i2c_rx_fifo_full(bus)))) {
|
||||
npcm_i2c_slave_rd_wr(bus);
|
||||
iowrite8(NPCM_I2CST_SDAST, bus->reg + NPCM_I2CST);
|
||||
ret = IRQ_HANDLED;
|
||||
} /* SDAST */
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int npcm_i2c_reg_slave(struct i2c_client *client)
|
||||
{
|
||||
unsigned long lock_flags;
|
||||
struct npcm_i2c *bus = i2c_get_adapdata(client->adapter);
|
||||
|
||||
bus->slave = client;
|
||||
|
||||
if (!bus->slave)
|
||||
return -EINVAL;
|
||||
|
||||
if (client->flags & I2C_CLIENT_TEN)
|
||||
return -EAFNOSUPPORT;
|
||||
|
||||
spin_lock_irqsave(&bus->lock, lock_flags);
|
||||
|
||||
npcm_i2c_init_params(bus);
|
||||
bus->slv_rd_size = 0;
|
||||
bus->slv_wr_size = 0;
|
||||
bus->slv_rd_ind = 0;
|
||||
bus->slv_wr_ind = 0;
|
||||
if (client->flags & I2C_CLIENT_PEC)
|
||||
bus->PEC_use = true;
|
||||
|
||||
dev_info(bus->dev, "i2c%d register slave SA=0x%x, PEC=%d\n", bus->num,
|
||||
client->addr, bus->PEC_use);
|
||||
|
||||
npcm_i2c_slave_enable(bus, I2C_SLAVE_ADDR1, client->addr, true);
|
||||
npcm_i2c_clear_fifo_int(bus);
|
||||
npcm_i2c_clear_rx_fifo(bus);
|
||||
npcm_i2c_clear_tx_fifo(bus);
|
||||
npcm_i2c_slave_int_enable(bus, true);
|
||||
|
||||
spin_unlock_irqrestore(&bus->lock, lock_flags);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int npcm_i2c_unreg_slave(struct i2c_client *client)
|
||||
{
|
||||
struct npcm_i2c *bus = client->adapter->algo_data;
|
||||
unsigned long lock_flags;
|
||||
|
||||
spin_lock_irqsave(&bus->lock, lock_flags);
|
||||
if (!bus->slave) {
|
||||
spin_unlock_irqrestore(&bus->lock, lock_flags);
|
||||
return -EINVAL;
|
||||
}
|
||||
npcm_i2c_slave_int_enable(bus, false);
|
||||
npcm_i2c_remove_slave_addr(bus, client->addr);
|
||||
bus->slave = NULL;
|
||||
spin_unlock_irqrestore(&bus->lock, lock_flags);
|
||||
return 0;
|
||||
}
|
||||
#endif /* CONFIG_I2C_SLAVE */
|
||||
|
||||
static void npcm_i2c_master_fifo_read(struct npcm_i2c *bus)
|
||||
{
|
||||
int rcount;
|
||||
@ -1372,6 +1953,9 @@ static int __npcm_i2c_init(struct npcm_i2c *bus, struct platform_device *pdev)
|
||||
bus->state = I2C_DISABLE;
|
||||
bus->master_or_slave = I2C_SLAVE;
|
||||
bus->int_time_stamp = 0;
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
bus->slave = NULL;
|
||||
#endif
|
||||
|
||||
ret = device_property_read_u32(&pdev->dev, "clock-frequency",
|
||||
&clk_freq_hz);
|
||||
@ -1401,6 +1985,12 @@ static irqreturn_t npcm_i2c_bus_irq(int irq, void *dev_id)
|
||||
if (!npcm_i2c_int_master_handler(bus))
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
if (bus->slave) {
|
||||
bus->master_or_slave = I2C_SLAVE;
|
||||
return npcm_i2c_int_slave_handler(bus);
|
||||
}
|
||||
#endif
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
@ -1520,6 +2110,11 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
||||
*/
|
||||
spin_lock_irqsave(&bus->lock, flags);
|
||||
bus_busy = ioread8(bus->reg + NPCM_I2CCST) & NPCM_I2CCST_BB;
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
if (!bus_busy && bus->slave)
|
||||
iowrite8((bus->slave->addr & 0x7F),
|
||||
bus->reg + NPCM_I2CADDR1);
|
||||
#endif
|
||||
spin_unlock_irqrestore(&bus->lock, flags);
|
||||
|
||||
} while (time_is_after_jiffies(time_left) && bus_busy);
|
||||
@ -1564,6 +2159,12 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
||||
if (bus->cmd_err == -EAGAIN)
|
||||
ret = i2c_recover_bus(adap);
|
||||
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
/* reenable slave if it was enabled */
|
||||
if (bus->slave)
|
||||
iowrite8((bus->slave->addr & 0x7F) | NPCM_I2CADDR_SAEN,
|
||||
bus->reg + NPCM_I2CADDR1);
|
||||
#endif
|
||||
return bus->cmd_err;
|
||||
}
|
||||
|
||||
@ -1572,7 +2173,8 @@ static u32 npcm_i2c_functionality(struct i2c_adapter *adap)
|
||||
return I2C_FUNC_I2C |
|
||||
I2C_FUNC_SMBUS_EMUL |
|
||||
I2C_FUNC_SMBUS_BLOCK_DATA |
|
||||
I2C_FUNC_SMBUS_PEC;
|
||||
I2C_FUNC_SMBUS_PEC |
|
||||
I2C_FUNC_SLAVE;
|
||||
}
|
||||
|
||||
static const struct i2c_adapter_quirks npcm_i2c_quirks = {
|
||||
@ -1584,6 +2186,10 @@ static const struct i2c_adapter_quirks npcm_i2c_quirks = {
|
||||
static const struct i2c_algorithm npcm_i2c_algo = {
|
||||
.master_xfer = npcm_i2c_master_xfer,
|
||||
.functionality = npcm_i2c_functionality,
|
||||
#if IS_ENABLED(CONFIG_I2C_SLAVE)
|
||||
.reg_slave = npcm_i2c_reg_slave,
|
||||
.unreg_slave = npcm_i2c_unreg_slave,
|
||||
#endif
|
||||
};
|
||||
|
||||
/* i2c debugfs directory: used to keep health monitor of i2c devices */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user