AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-25 01:59:57 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

phy: qualcomm: add qcom ipq806x dwc usb phy driver

Browse Source 
This has lost in the original push for the dwc3 qcom driver.
This is needed for ipq806x SoC as without this the usb ports
doesn't work at all.

Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Link: https://lore.kernel.org/r/20200717131635.11076-1-ansuelsmth@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Ansuel Smith 2020-07-17 15:16:31 +02:00 committed by Vinod Koul
parent 6cd84cfc8e
commit ef19b117b8
3 changed files with 582 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
drivers/phy/qualcomm/Kconfig
View File

@ -104,3 +104,13 @@ config PHY_QCOM_USB_SS
help
Enable this to support the Super-Speed USB transceiver on various
Qualcomm chipsets.
config PHY_QCOM_IPQ806X_USB
tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
depends on HAS_IOMEM
depends on OF && (ARCH_QCOM || COMPILE_TEST)
select GENERIC_PHY
help
This option enables support for the Synopsis PHYs present inside the
Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
both HS and SS PHY controllers.

1
drivers/phy/qualcomm/Makefile
View File

@ -11,3 +11,4 @@ obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o
obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2)+= phy-qcom-snps-femto-v2.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o

571
drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c Normal file
View File

@ -0,0 +1,571 @@
// SPDX-License-Identifier: GPL-2.0-only
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
/* USB QSCRATCH Hardware registers */
#define QSCRATCH_GENERAL_CFG (0x08)
#define HSUSB_PHY_CTRL_REG (0x10)
/* PHY_CTRL_REG */
#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24)
#define HSUSB_CTRL_USB2_SUSPEND BIT(23)
#define HSUSB_CTRL_UTMI_CLK_EN BIT(21)
#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20)
#define HSUSB_CTRL_USE_CLKCORE BIT(18)
#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17)
#define HSUSB_CTRL_COMMONONN BIT(11)
#define HSUSB_CTRL_ID_HV_CLAMP BIT(9)
#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8)
#define HSUSB_CTRL_CLAMP_EN BIT(7)
#define HSUSB_CTRL_RETENABLEN BIT(1)
#define HSUSB_CTRL_POR BIT(0)
/* QSCRATCH_GENERAL_CFG */
#define HSUSB_GCFG_XHCI_REV BIT(2)
/* USB QSCRATCH Hardware registers */
#define SSUSB_PHY_CTRL_REG (0x00)
#define SSUSB_PHY_PARAM_CTRL_1 (0x04)
#define SSUSB_PHY_PARAM_CTRL_2 (0x08)
#define CR_PROTOCOL_DATA_IN_REG (0x0c)
#define CR_PROTOCOL_DATA_OUT_REG (0x10)
#define CR_PROTOCOL_CAP_ADDR_REG (0x14)
#define CR_PROTOCOL_CAP_DATA_REG (0x18)
#define CR_PROTOCOL_READ_REG (0x1c)
#define CR_PROTOCOL_WRITE_REG (0x20)
/* PHY_CTRL_REG */
#define SSUSB_CTRL_REF_USE_PAD BIT(28)
#define SSUSB_CTRL_TEST_POWERDOWN BIT(27)
#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24)
#define SSUSB_CTRL_SS_PHY_EN BIT(8)
#define SSUSB_CTRL_SS_PHY_RESET BIT(7)
/* SSPHY control registers - Does this need 0x30? */
#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * (lane))
#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * (lane))
/* SSPHY SoC version specific values */
#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */
/* Override value for transmit preemphasis */
#define SSPHY_TX_DEEMPH_3_5DB 23
/* Override value for mpll */
#define SSPHY_MPLL_VALUE 0
/* QSCRATCH PHY_PARAM_CTRL1 fields */
#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK GENMASK(26, 19)
#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK GENMASK(19, 13)
#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK GENMASK(13, 7)
#define PHY_PARAM_CTRL1_LOS_BIAS_MASK GENMASK(7, 2)
#define PHY_PARAM_CTRL1_MASK \
(PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \
PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \
PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \
PHY_PARAM_CTRL1_LOS_BIAS_MASK)
#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \
(((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \
(((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \
(((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
#define PHY_PARAM_CTRL1_LOS_BIAS(x) \
(((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
/* RX OVRD IN HI bits */
#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13)
#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12)
#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11)
#define RX_OVRD_IN_HI_RX_EQ_MASK GENMASK(10, 7)
#define RX_OVRD_IN_HI_RX_EQ(x) ((x) << 8)
#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7)
#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6)
#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5)
#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK GENMASK(4, 2)
#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2)
#define RX_OVRD_IN_HI_RX_RATE_MASK GENMASK(2, 0)
/* TX OVRD DRV LO register bits */
#define TX_OVRD_DRV_LO_AMPLITUDE_MASK GENMASK(6, 0)
#define TX_OVRD_DRV_LO_PREEMPH_MASK GENMASK(13, 6)
#define TX_OVRD_DRV_LO_PREEMPH(x) ((x) << 7)
#define TX_OVRD_DRV_LO_EN BIT(14)
/* MPLL bits */
#define SSPHY_MPLL_MASK GENMASK(8, 5)
#define SSPHY_MPLL(x) ((x) << 5)
/* SS CAP register bits */
#define SS_CR_CAP_ADDR_REG BIT(0)
#define SS_CR_CAP_DATA_REG BIT(0)
#define SS_CR_READ_REG BIT(0)
#define SS_CR_WRITE_REG BIT(0)
struct usb_phy {
void __iomem *base;
struct device *dev;
struct clk *xo_clk;
struct clk *ref_clk;
u32 rx_eq;
u32 tx_deamp_3_5db;
u32 mpll;
};
struct phy_drvdata {
struct phy_ops ops;
u32 clk_rate;
};
/**
* Write register and read back masked value to confirm it is written
*
* @base - QCOM DWC3 PHY base virtual address.
* @offset - register offset.
* @mask - register bitmask specifying what should be updated
* @val - value to write.
*/
static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3,
u32 offset,
const u32 mask, u32 val)
{
u32 write_val, tmp = readl(phy_dwc3->base + offset);
tmp &= ~mask; /* retain other bits */
write_val = tmp | val;
writel(write_val, phy_dwc3->base + offset);
/* Read back to see if val was written */
tmp = readl(phy_dwc3->base + offset);
tmp &= mask; /* clear other bits */
if (tmp != val)
dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", val, offset);
}
static int wait_for_latch(void __iomem *addr)
{
u32 retry = 10;
while (true) {
if (!readl(addr))
break;
if (--retry == 0)
return -ETIMEDOUT;
usleep_range(10, 20);
}
return 0;
}
/**
* Write SSPHY register
*
* @base - QCOM DWC3 PHY base virtual address.
* @addr - SSPHY address to write.
* @val - value to write.
*/
static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
u32 addr, u32 val)
{
int ret;
writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
writel(SS_CR_CAP_ADDR_REG,
phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
if (ret)
goto err_wait;
writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
writel(SS_CR_CAP_DATA_REG,
phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
if (ret)
goto err_wait;
writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
err_wait:
if (ret)
dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
return ret;
}
/**
* Read SSPHY register.
*
* @base - QCOM DWC3 PHY base virtual address.
* @addr - SSPHY address to read.
*/
static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3,
u32 addr, u32 *val)
{
int ret;
writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
writel(SS_CR_CAP_ADDR_REG,
phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
if (ret)
goto err_wait;
/*
* Due to hardware bug, first read of SSPHY register might be
* incorrect. Hence as workaround, SW should perform SSPHY register
* read twice, but use only second read and ignore first read.
*/
writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
if (ret)
goto err_wait;
/* throwaway read */
readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
if (ret)
goto err_wait;
*val = readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
err_wait:
return ret;
}
static int qcom_ipq806x_usb_hs_phy_init(struct phy *phy)
{
struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
int ret;
u32 val;
ret = clk_prepare_enable(phy_dwc3->xo_clk);
if (ret)
return ret;
ret = clk_prepare_enable(phy_dwc3->ref_clk);
if (ret) {
clk_disable_unprepare(phy_dwc3->xo_clk);
return ret;
}
/*
* HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
* enable clamping, and disable RETENTION (power-on default is ENABLED)
*/
val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN |
HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
/* use core clock if external reference is not present */
if (!phy_dwc3->xo_clk)
val |= HSUSB_CTRL_USE_CLKCORE;
writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
usleep_range(2000, 2200);
/* Disable (bypass) VBUS and ID filters */
writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
return 0;
}
static int qcom_ipq806x_usb_hs_phy_exit(struct phy *phy)
{
struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
clk_disable_unprepare(phy_dwc3->ref_clk);
clk_disable_unprepare(phy_dwc3->xo_clk);
return 0;
}
static int qcom_ipq806x_usb_ss_phy_init(struct phy *phy)
{
struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
int ret;
u32 data;
ret = clk_prepare_enable(phy_dwc3->xo_clk);
if (ret)
return ret;
ret = clk_prepare_enable(phy_dwc3->ref_clk);
if (ret) {
clk_disable_unprepare(phy_dwc3->xo_clk);
return ret;
}
/* reset phy */
data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
writel(data | SSUSB_CTRL_SS_PHY_RESET,
phy_dwc3->base + SSUSB_PHY_CTRL_REG);
usleep_range(2000, 2200);
writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
/* clear REF_PAD if we don't have XO clk */
if (!phy_dwc3->xo_clk)
data &= ~SSUSB_CTRL_REF_USE_PAD;
else
data |= SSUSB_CTRL_REF_USE_PAD;
writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
/* wait for ref clk to become stable, this can take up to 30ms */
msleep(30);
data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
/*
* WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
* in HS mode instead of SS mode. Workaround it by asserting
* LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
*/
ret = usb_ss_read_phycreg(phy_dwc3, 0x102D, &data);
if (ret)
goto err_phy_trans;
data |= (1 << 7);
ret = usb_ss_write_phycreg(phy_dwc3, 0x102D, data);
if (ret)
goto err_phy_trans;
ret = usb_ss_read_phycreg(phy_dwc3, 0x1010, &data);
if (ret)
goto err_phy_trans;
data &= ~0xff0;
data |= 0x20;
ret = usb_ss_write_phycreg(phy_dwc3, 0x1010, data);
if (ret)
goto err_phy_trans;
/*
* Fix RX Equalization setting as follows
* LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
* LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
* LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
* LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
*/
ret = usb_ss_read_phycreg(phy_dwc3, SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
if (ret)
goto err_phy_trans;
data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
data |= RX_OVRD_IN_HI_RX_EQ(phy_dwc3->rx_eq);
data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
ret = usb_ss_write_phycreg(phy_dwc3,
SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
if (ret)
goto err_phy_trans;
/*
* Set EQ and TX launch amplitudes as follows
* LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
* LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
* LANE0.TX_OVRD_DRV_LO.EN set to 1.
*/
ret = usb_ss_read_phycreg(phy_dwc3,
SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
if (ret)
goto err_phy_trans;
data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
data |= TX_OVRD_DRV_LO_PREEMPH(phy_dwc3->tx_deamp_3_5db);
data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
data |= 0x6E;
data |= TX_OVRD_DRV_LO_EN;
ret = usb_ss_write_phycreg(phy_dwc3,
SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
if (ret)
goto err_phy_trans;
data = 0;
data &= ~SSPHY_MPLL_MASK;
data |= SSPHY_MPLL(phy_dwc3->mpll);
usb_ss_write_phycreg(phy_dwc3, 0x30, data);
/*
* Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
* TX_FULL_SWING [26:20] amplitude to 110
* TX_DEEMPH_6DB [19:14] to 32
* TX_DEEMPH_3_5DB [13:8] set based on SoC version
* LOS_BIAS [7:3] to 9
*/
data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1);
data &= ~PHY_PARAM_CTRL1_MASK;
data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
PHY_PARAM_CTRL1_LOS_BIAS(0x9);
usb_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
PHY_PARAM_CTRL1_MASK, data);
err_phy_trans:
return ret;
}
static int qcom_ipq806x_usb_ss_phy_exit(struct phy *phy)
{
struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
/* Sequence to put SSPHY in low power state:
* 1. Clear REF_PHY_EN in PHY_CTRL_REG
* 2. Clear REF_USE_PAD in PHY_CTRL_REG
* 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
*/
usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
SSUSB_CTRL_SS_PHY_EN, 0x0);
usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
SSUSB_CTRL_REF_USE_PAD, 0x0);
usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
SSUSB_CTRL_TEST_POWERDOWN, 0x0);
clk_disable_unprepare(phy_dwc3->ref_clk);
clk_disable_unprepare(phy_dwc3->xo_clk);
return 0;
}
static const struct phy_drvdata qcom_ipq806x_usb_hs_drvdata = {
.ops = {
.init = qcom_ipq806x_usb_hs_phy_init,
.exit = qcom_ipq806x_usb_hs_phy_exit,
.owner = THIS_MODULE,
},
.clk_rate = 60000000,
};
static const struct phy_drvdata qcom_ipq806x_usb_ss_drvdata = {
.ops = {
.init = qcom_ipq806x_usb_ss_phy_init,
.exit = qcom_ipq806x_usb_ss_phy_exit,
.owner = THIS_MODULE,
},
.clk_rate = 125000000,
};
static const struct of_device_id qcom_ipq806x_usb_phy_table[] = {
{ .compatible = "qcom,ipq806x-usb-phy-hs",
.data = &qcom_ipq806x_usb_hs_drvdata },
{ .compatible = "qcom,ipq806x-usb-phy-ss",
.data = &qcom_ipq806x_usb_ss_drvdata },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, qcom_ipq806x_usb_phy_table);
static int qcom_ipq806x_usb_phy_probe(struct platform_device *pdev)
{
struct resource *res;
resource_size_t size;
struct phy *generic_phy;
struct usb_phy *phy_dwc3;
const struct phy_drvdata *data;
struct phy_provider *phy_provider;
phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
if (!phy_dwc3)
return -ENOMEM;
data = of_device_get_match_data(&pdev->dev);
phy_dwc3->dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -EINVAL;
size = resource_size(res);
phy_dwc3->base = devm_ioremap(phy_dwc3->dev, res->start, size);
if (IS_ERR(phy_dwc3->base)) {
dev_err(phy_dwc3->dev, "failed to map reg\n");
return PTR_ERR(phy_dwc3->base);
}
phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
if (IS_ERR(phy_dwc3->ref_clk)) {
dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
return PTR_ERR(phy_dwc3->ref_clk);
}
clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
if (IS_ERR(phy_dwc3->xo_clk)) {
dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
phy_dwc3->xo_clk = NULL;
}
/* Parse device node to probe HSIO settings */
if (device_property_read_u32(&pdev->dev, "qcom,rx-eq",
&phy_dwc3->rx_eq))
phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db",
&phy_dwc3->tx_deamp_3_5db))
phy_dwc3->rx_eq = SSPHY_TX_DEEMPH_3_5DB;
if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll))
phy_dwc3->mpll = SSPHY_MPLL_VALUE;
generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, &data->ops);
if (IS_ERR(generic_phy))
return PTR_ERR(generic_phy);
phy_set_drvdata(generic_phy, phy_dwc3);
platform_set_drvdata(pdev, phy_dwc3);
phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
of_phy_simple_xlate);
if (IS_ERR(phy_provider))
return PTR_ERR(phy_provider);
return 0;
}
static struct platform_driver qcom_ipq806x_usb_phy_driver = {
.probe = qcom_ipq806x_usb_phy_probe,
.driver = {
.name = "qcom-ipq806x-usb-phy",
.owner = THIS_MODULE,
.of_match_table = qcom_ipq806x_usb_phy_table,
},
};
module_platform_driver(qcom_ipq806x_usb_phy_driver);
MODULE_ALIAS("platform:phy-qcom-ipq806x-usb");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");