mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 21:00:53 +07:00
Merge branch 'topic/maya44' into for-linus
* topic/maya44: ALSA: ice1724 - Add ESI Maya44 support ALSA: ice1724 - Allow spec driver to create own routing controls ALSA: ice1724 - Add PCI postint to reset sequence ALSA: ice1724 - Clean up definitions of DMA records ALSA: ice1724 - Check error in set_rate function
This commit is contained in:
Takashi Iwai
commit
ed8cc176c9
@ -944,6 +944,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
|
||||
* Onkyo SE-90PCI
|
||||
* Onkyo SE-200PCI
|
||||
* ESI Juli@
|
||||
* ESI Maya44
|
||||
* Hercules Fortissimo IV
|
||||
* EGO-SYS WaveTerminal 192M
|
||||
|
||||
@ -952,7 +953,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
|
||||
prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192,
|
||||
juli, aureon51, aureon71, universe, ap192, k8x800,
|
||||
phase22, phase28, ms300, av710, se200pci, se90pci,
|
||||
fortissimo4, sn25p, WT192M
|
||||
fortissimo4, sn25p, WT192M, maya44
|
||||
|
||||
This module supports multiple cards and autoprobe.
|
||||
|
||||
|
||||
163
Documentation/sound/alsa/README.maya44
Normal file
163
Documentation/sound/alsa/README.maya44
Normal file
@ -0,0 +1,163 @@
|
||||
NOTE: The following is the original document of Rainer's patch that the
|
||||
current maya44 code based on. Some contents might be obsoleted, but I
|
||||
keep here as reference -- tiwai
|
||||
|
||||
----------------------------------------------------------------
|
||||
|
||||
STATE OF DEVELOPMENT:
|
||||
|
||||
This driver is being developed on the initiative of Piotr Makowski (oponek@gmail.com) and financed by Lars Bergmann.
|
||||
Development is carried out by Rainer Zimmermann (mail@lightshed.de).
|
||||
|
||||
ESI provided a sample Maya44 card for the development work.
|
||||
|
||||
However, unfortunately it has turned out difficult to get detailed programming information, so I (Rainer Zimmermann) had to find out some card-specific information by experiment and conjecture. Some information (in particular, several GPIO bits) is still missing.
|
||||
|
||||
This is the first testing version of the Maya44 driver released to the alsa-devel mailing list (Feb 5, 2008).
|
||||
|
||||
|
||||
The following functions work, as tested by Rainer Zimmermann and Piotr Makowski:
|
||||
|
||||
- playback and capture at all sampling rates
|
||||
- input/output level
|
||||
- crossmixing
|
||||
- line/mic switch
|
||||
- phantom power switch
|
||||
- analogue monitor a.k.a bypass
|
||||
|
||||
|
||||
The following functions *should* work, but are not fully tested:
|
||||
|
||||
- Channel 3+4 analogue - S/PDIF input switching
|
||||
- S/PDIF output
|
||||
- all inputs/outputs on the M/IO/DIO extension card
|
||||
- internal/external clock selection
|
||||
|
||||
|
||||
*In particular, we would appreciate testing of these functions by anyone who has access to an M/IO/DIO extension card.*
|
||||
|
||||
|
||||
Things that do not seem to work:
|
||||
|
||||
- The level meters ("multi track") in 'alsamixer' do not seem to react to signals in (if this is a bug, it would probably be in the existing ICE1724 code).
|
||||
|
||||
- Ardour 2.1 seems to work only via JACK, not using ALSA directly or via OSS. This still needs to be tracked down.
|
||||
|
||||
|
||||
DRIVER DETAILS:
|
||||
|
||||
the following files were added:
|
||||
|
||||
pci/ice1724/maya44.c - Maya44 specific code
|
||||
pci/ice1724/maya44.h
|
||||
pci/ice1724/ice1724.patch
|
||||
pci/ice1724/ice1724.h.patch - PROPOSED patch to ice1724.h (see SAMPLING RATES)
|
||||
i2c/other/wm8776.c - low-level access routines for Wolfson WM8776 codecs
|
||||
include/wm8776.h
|
||||
|
||||
|
||||
Note that the wm8776.c code is meant to be card-independent and does not actually register the codec with the ALSA infrastructure.
|
||||
This is done in maya44.c, mainly because some of the WM8776 controls are used in Maya44-specific ways, and should be named appropriately.
|
||||
|
||||
|
||||
the following files were created in pci/ice1724, simply #including the corresponding file from the alsa-kernel tree:
|
||||
|
||||
wtm.h
|
||||
vt1720_mobo.h
|
||||
revo.h
|
||||
prodigy192.h
|
||||
pontis.h
|
||||
phase.h
|
||||
maya44.h
|
||||
juli.h
|
||||
aureon.h
|
||||
amp.h
|
||||
envy24ht.h
|
||||
se.h
|
||||
prodigy_hifi.h
|
||||
|
||||
|
||||
*I hope this is the correct way to do things.*
|
||||
|
||||
|
||||
SAMPLING RATES:
|
||||
|
||||
The Maya44 card (or more exactly, the Wolfson WM8776 codecs) allow a maximum sampling rate of 192 kHz for playback and 92 kHz for capture.
|
||||
|
||||
As the ICE1724 chip only allows one global sampling rate, this is handled as follows:
|
||||
|
||||
* setting the sampling rate on any open PCM device on the maya44 card will always set the *global* sampling rate for all playback and capture channels.
|
||||
|
||||
* In the current state of the driver, setting rates of up to 192 kHz is permitted even for capture devices.
|
||||
|
||||
*AVOID CAPTURING AT RATES ABOVE 96kHz*, even though it may appear to work. The codec cannot actually capture at such rates, meaning poor quality.
|
||||
|
||||
|
||||
I propose some additional code for limiting the sampling rate when setting on a capture pcm device. However because of the global sampling rate, this logic would be somewhat problematic.
|
||||
|
||||
The proposed code (currently deactivated) is in ice1712.h.patch, ice1724.c and maya44.c (in pci/ice1712).
|
||||
|
||||
|
||||
SOUND DEVICES:
|
||||
|
||||
PCM devices correspond to inputs/outputs as follows (assuming Maya44 is card #0):
|
||||
|
||||
hw:0,0 input - stereo, analog input 1+2
|
||||
hw:0,0 output - stereo, analog output 1+2
|
||||
hw:0,1 input - stereo, analog input 3+4 OR S/PDIF input
|
||||
hw:0,1 output - stereo, analog output 3+4 (and SPDIF out)
|
||||
|
||||
|
||||
NAMING OF MIXER CONTROLS:
|
||||
|
||||
(for more information about the signal flow, please refer to the block diagram on p.24 of the ESI Maya44 manual, or in the ESI windows software).
|
||||
|
||||
|
||||
PCM: (digital) output level for channel 1+2
|
||||
PCM 1: same for channel 3+4
|
||||
|
||||
Mic Phantom+48V: switch for +48V phantom power for electrostatic microphones on input 1/2.
|
||||
Make sure this is not turned on while any other source is connected to input 1/2.
|
||||
It might damage the source and/or the maya44 card.
|
||||
|
||||
Mic/Line input: if switch is is on, input jack 1/2 is microphone input (mono), otherwise line input (stereo).
|
||||
|
||||
Bypass: analogue bypass from ADC input to output for channel 1+2. Same as "Monitor" in the windows driver.
|
||||
Bypass 1: same for channel 3+4.
|
||||
|
||||
Crossmix: cross-mixer from channels 1+2 to channels 3+4
|
||||
Crossmix 1: cross-mixer from channels 3+4 to channels 1+2
|
||||
|
||||
IEC958 Output: switch for S/PDIF output.
|
||||
This is not supported by the ESI windows driver.
|
||||
S/PDIF should output the same signal as channel 3+4. [untested!]
|
||||
|
||||
|
||||
Digitial output selectors:
|
||||
|
||||
These switches allow a direct digital routing from the ADCs to the DACs.
|
||||
Each switch determines where the digital input data to one of the DACs comes from.
|
||||
They are not supported by the ESI windows driver.
|
||||
For normal operation, they should all be set to "PCM out".
|
||||
|
||||
H/W: Output source channel 1
|
||||
H/W 1: Output source channel 2
|
||||
H/W 2: Output source channel 3
|
||||
H/W 3: Output source channel 4
|
||||
|
||||
H/W 4 ... H/W 9: unknown function, left in to enable testing.
|
||||
Possibly some of these control S/PDIF output(s).
|
||||
If these turn out to be unused, they will go away in later driver versions.
|
||||
|
||||
Selectable values for each of the digital output selectors are:
|
||||
"PCM out" -> DAC output of the corresponding channel (default setting)
|
||||
"Input 1"...
|
||||
"Input 4" -> direct routing from ADC output of the selected input channel
|
||||
|
||||
|
||||
--------
|
||||
|
||||
Feb 14, 2008
|
||||
Rainer Zimmermann
|
||||
mail@lightshed.de
|
||||
|
||||
@ -5,7 +5,7 @@
|
||||
|
||||
snd-ice17xx-ak4xxx-objs := ak4xxx.o
|
||||
snd-ice1712-objs := ice1712.o delta.o hoontech.o ews.o
|
||||
snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o
|
||||
snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o maya44.o
|
||||
|
||||
# Toplevel Module Dependency
|
||||
obj-$(CONFIG_SND_ICE1712) += snd-ice1712.o snd-ice17xx-ak4xxx.o
|
||||
|
||||
@ -335,6 +335,7 @@ struct snd_ice1712 {
|
||||
unsigned int force_rdma1:1; /* VT1720/4 - RDMA1 as non-spdif */
|
||||
unsigned int midi_output:1; /* VT1720/4: MIDI output triggered */
|
||||
unsigned int midi_input:1; /* VT1720/4: MIDI input triggered */
|
||||
unsigned int own_routing:1; /* VT1720/4: use own routing ctls */
|
||||
unsigned int num_total_dacs; /* total DACs */
|
||||
unsigned int num_total_adcs; /* total ADCs */
|
||||
unsigned int cur_rate; /* current rate */
|
||||
@ -458,10 +459,17 @@ static inline int snd_ice1712_gpio_read_bits(struct snd_ice1712 *ice,
|
||||
return snd_ice1712_gpio_read(ice) & mask;
|
||||
}
|
||||
|
||||
/* route access functions */
|
||||
int snd_ice1724_get_route_val(struct snd_ice1712 *ice, int shift);
|
||||
int snd_ice1724_put_route_val(struct snd_ice1712 *ice, unsigned int val,
|
||||
int shift);
|
||||
|
||||
int snd_ice1712_spdif_build_controls(struct snd_ice1712 *ice);
|
||||
|
||||
int snd_ice1712_akm4xxx_init(struct snd_akm4xxx *ak, const struct snd_akm4xxx *template,
|
||||
const struct snd_ak4xxx_private *priv, struct snd_ice1712 *ice);
|
||||
int snd_ice1712_akm4xxx_init(struct snd_akm4xxx *ak,
|
||||
const struct snd_akm4xxx *template,
|
||||
const struct snd_ak4xxx_private *priv,
|
||||
struct snd_ice1712 *ice);
|
||||
void snd_ice1712_akm4xxx_free(struct snd_ice1712 *ice);
|
||||
int snd_ice1712_akm4xxx_build_controls(struct snd_ice1712 *ice);
|
||||
|
||||
|
||||
@ -49,6 +49,7 @@
|
||||
#include "prodigy192.h"
|
||||
#include "prodigy_hifi.h"
|
||||
#include "juli.h"
|
||||
#include "maya44.h"
|
||||
#include "phase.h"
|
||||
#include "wtm.h"
|
||||
#include "se.h"
|
||||
@ -65,6 +66,7 @@ MODULE_SUPPORTED_DEVICE("{"
|
||||
PRODIGY192_DEVICE_DESC
|
||||
PRODIGY_HIFI_DEVICE_DESC
|
||||
JULI_DEVICE_DESC
|
||||
MAYA44_DEVICE_DESC
|
||||
PHASE_DEVICE_DESC
|
||||
WTM_DEVICE_DESC
|
||||
SE_DEVICE_DESC
|
||||
@ -626,7 +628,7 @@ static unsigned char stdclock_set_mclk(struct snd_ice1712 *ice,
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
|
||||
static int snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
|
||||
int force)
|
||||
{
|
||||
unsigned long flags;
|
||||
@ -634,17 +636,18 @@ static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
|
||||
unsigned int i, old_rate;
|
||||
|
||||
if (rate > ice->hw_rates->list[ice->hw_rates->count - 1])
|
||||
return;
|
||||
return -EINVAL;
|
||||
|
||||
spin_lock_irqsave(&ice->reg_lock, flags);
|
||||
if ((inb(ICEMT1724(ice, DMA_CONTROL)) & DMA_STARTS) ||
|
||||
(inb(ICEMT1724(ice, DMA_PAUSE)) & DMA_PAUSES)) {
|
||||
/* running? we cannot change the rate now... */
|
||||
spin_unlock_irqrestore(&ice->reg_lock, flags);
|
||||
return;
|
||||
return -EBUSY;
|
||||
}
|
||||
if (!force && is_pro_rate_locked(ice)) {
|
||||
spin_unlock_irqrestore(&ice->reg_lock, flags);
|
||||
return;
|
||||
return (rate == ice->cur_rate) ? 0 : -EBUSY;
|
||||
}
|
||||
|
||||
old_rate = ice->get_rate(ice);
|
||||
@ -652,7 +655,7 @@ static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
|
||||
ice->set_rate(ice, rate);
|
||||
else if (rate == ice->cur_rate) {
|
||||
spin_unlock_irqrestore(&ice->reg_lock, flags);
|
||||
return;
|
||||
return 0;
|
||||
}
|
||||
|
||||
ice->cur_rate = rate;
|
||||
@ -674,13 +677,15 @@ static void snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate,
|
||||
}
|
||||
if (ice->spdif.ops.setup_rate)
|
||||
ice->spdif.ops.setup_rate(ice, rate);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int snd_vt1724_pcm_hw_params(struct snd_pcm_substream *substream,
|
||||
struct snd_pcm_hw_params *hw_params)
|
||||
{
|
||||
struct snd_ice1712 *ice = snd_pcm_substream_chip(substream);
|
||||
int i, chs;
|
||||
int i, chs, err;
|
||||
|
||||
chs = params_channels(hw_params);
|
||||
mutex_lock(&ice->open_mutex);
|
||||
@ -715,7 +720,11 @@ static int snd_vt1724_pcm_hw_params(struct snd_pcm_substream *substream,
|
||||
}
|
||||
}
|
||||
mutex_unlock(&ice->open_mutex);
|
||||
snd_vt1724_set_pro_rate(ice, params_rate(hw_params), 0);
|
||||
|
||||
err = snd_vt1724_set_pro_rate(ice, params_rate(hw_params), 0);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
|
||||
}
|
||||
|
||||
@ -848,20 +857,39 @@ static snd_pcm_uframes_t snd_vt1724_pcm_pointer(struct snd_pcm_substream *substr
|
||||
#endif
|
||||
}
|
||||
|
||||
static const struct vt1724_pcm_reg vt1724_playback_pro_reg = {
|
||||
static const struct vt1724_pcm_reg vt1724_pdma0_reg = {
|
||||
.addr = VT1724_MT_PLAYBACK_ADDR,
|
||||
.size = VT1724_MT_PLAYBACK_SIZE,
|
||||
.count = VT1724_MT_PLAYBACK_COUNT,
|
||||
.start = VT1724_PDMA0_START,
|
||||
};
|
||||
|
||||
static const struct vt1724_pcm_reg vt1724_capture_pro_reg = {
|
||||
static const struct vt1724_pcm_reg vt1724_pdma4_reg = {
|
||||
.addr = VT1724_MT_PDMA4_ADDR,
|
||||
.size = VT1724_MT_PDMA4_SIZE,
|
||||
.count = VT1724_MT_PDMA4_COUNT,
|
||||
.start = VT1724_PDMA4_START,
|
||||
};
|
||||
|
||||
static const struct vt1724_pcm_reg vt1724_rdma0_reg = {
|
||||
.addr = VT1724_MT_CAPTURE_ADDR,
|
||||
.size = VT1724_MT_CAPTURE_SIZE,
|
||||
.count = VT1724_MT_CAPTURE_COUNT,
|
||||
.start = VT1724_RDMA0_START,
|
||||
};
|
||||
|
||||
static const struct vt1724_pcm_reg vt1724_rdma1_reg = {
|
||||
.addr = VT1724_MT_RDMA1_ADDR,
|
||||
.size = VT1724_MT_RDMA1_SIZE,
|
||||
.count = VT1724_MT_RDMA1_COUNT,
|
||||
.start = VT1724_RDMA1_START,
|
||||
};
|
||||
|
||||
#define vt1724_playback_pro_reg vt1724_pdma0_reg
|
||||
#define vt1724_playback_spdif_reg vt1724_pdma4_reg
|
||||
#define vt1724_capture_pro_reg vt1724_rdma0_reg
|
||||
#define vt1724_capture_spdif_reg vt1724_rdma1_reg
|
||||
|
||||
static const struct snd_pcm_hardware snd_vt1724_playback_pro = {
|
||||
.info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
|
||||
SNDRV_PCM_INFO_BLOCK_TRANSFER |
|
||||
@ -1077,20 +1105,6 @@ static int __devinit snd_vt1724_pcm_profi(struct snd_ice1712 *ice, int device)
|
||||
* SPDIF PCM
|
||||
*/
|
||||
|
||||
static const struct vt1724_pcm_reg vt1724_playback_spdif_reg = {
|
||||
.addr = VT1724_MT_PDMA4_ADDR,
|
||||
.size = VT1724_MT_PDMA4_SIZE,
|
||||
.count = VT1724_MT_PDMA4_COUNT,
|
||||
.start = VT1724_PDMA4_START,
|
||||
};
|
||||
|
||||
static const struct vt1724_pcm_reg vt1724_capture_spdif_reg = {
|
||||
.addr = VT1724_MT_RDMA1_ADDR,
|
||||
.size = VT1724_MT_RDMA1_SIZE,
|
||||
.count = VT1724_MT_RDMA1_COUNT,
|
||||
.start = VT1724_RDMA1_START,
|
||||
};
|
||||
|
||||
/* update spdif control bits; call with reg_lock */
|
||||
static void update_spdif_bits(struct snd_ice1712 *ice, unsigned int val)
|
||||
{
|
||||
@ -1963,7 +1977,7 @@ static inline int digital_route_shift(int idx)
|
||||
return idx * 3;
|
||||
}
|
||||
|
||||
static int get_route_val(struct snd_ice1712 *ice, int shift)
|
||||
int snd_ice1724_get_route_val(struct snd_ice1712 *ice, int shift)
|
||||
{
|
||||
unsigned long val;
|
||||
unsigned char eitem;
|
||||
@ -1982,7 +1996,8 @@ static int get_route_val(struct snd_ice1712 *ice, int shift)
|
||||
return eitem;
|
||||
}
|
||||
|
||||
static int put_route_val(struct snd_ice1712 *ice, unsigned int val, int shift)
|
||||
int snd_ice1724_put_route_val(struct snd_ice1712 *ice, unsigned int val,
|
||||
int shift)
|
||||
{
|
||||
unsigned int old_val, nval;
|
||||
int change;
|
||||
@ -2010,7 +2025,7 @@ static int snd_vt1724_pro_route_analog_get(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
|
||||
int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
|
||||
ucontrol->value.enumerated.item[0] =
|
||||
get_route_val(ice, analog_route_shift(idx));
|
||||
snd_ice1724_get_route_val(ice, analog_route_shift(idx));
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -2019,8 +2034,9 @@ static int snd_vt1724_pro_route_analog_put(struct snd_kcontrol *kcontrol,
|
||||
{
|
||||
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
|
||||
int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
|
||||
return put_route_val(ice, ucontrol->value.enumerated.item[0],
|
||||
analog_route_shift(idx));
|
||||
return snd_ice1724_put_route_val(ice,
|
||||
ucontrol->value.enumerated.item[0],
|
||||
analog_route_shift(idx));
|
||||
}
|
||||
|
||||
static int snd_vt1724_pro_route_spdif_get(struct snd_kcontrol *kcontrol,
|
||||
@ -2029,7 +2045,7 @@ static int snd_vt1724_pro_route_spdif_get(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
|
||||
int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
|
||||
ucontrol->value.enumerated.item[0] =
|
||||
get_route_val(ice, digital_route_shift(idx));
|
||||
snd_ice1724_get_route_val(ice, digital_route_shift(idx));
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -2038,11 +2054,13 @@ static int snd_vt1724_pro_route_spdif_put(struct snd_kcontrol *kcontrol,
|
||||
{
|
||||
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
|
||||
int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
|
||||
return put_route_val(ice, ucontrol->value.enumerated.item[0],
|
||||
digital_route_shift(idx));
|
||||
return snd_ice1724_put_route_val(ice,
|
||||
ucontrol->value.enumerated.item[0],
|
||||
digital_route_shift(idx));
|
||||
}
|
||||
|
||||
static struct snd_kcontrol_new snd_vt1724_mixer_pro_analog_route __devinitdata = {
|
||||
static struct snd_kcontrol_new snd_vt1724_mixer_pro_analog_route __devinitdata =
|
||||
{
|
||||
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||
.name = "H/W Playback Route",
|
||||
.info = snd_vt1724_pro_route_info,
|
||||
@ -2109,6 +2127,7 @@ static struct snd_ice1712_card_info *card_tables[] __devinitdata = {
|
||||
snd_vt1724_prodigy_hifi_cards,
|
||||
snd_vt1724_prodigy192_cards,
|
||||
snd_vt1724_juli_cards,
|
||||
snd_vt1724_maya44_cards,
|
||||
snd_vt1724_phase_cards,
|
||||
snd_vt1724_wtm_cards,
|
||||
snd_vt1724_se_cards,
|
||||
@ -2246,8 +2265,10 @@ static int __devinit snd_vt1724_read_eeprom(struct snd_ice1712 *ice,
|
||||
static void __devinit snd_vt1724_chip_reset(struct snd_ice1712 *ice)
|
||||
{
|
||||
outb(VT1724_RESET , ICEREG1724(ice, CONTROL));
|
||||
inb(ICEREG1724(ice, CONTROL)); /* pci posting flush */
|
||||
msleep(10);
|
||||
outb(0, ICEREG1724(ice, CONTROL));
|
||||
inb(ICEREG1724(ice, CONTROL)); /* pci posting flush */
|
||||
msleep(10);
|
||||
}
|
||||
|
||||
@ -2277,9 +2298,12 @@ static int __devinit snd_vt1724_spdif_build_controls(struct snd_ice1712 *ice)
|
||||
if (snd_BUG_ON(!ice->pcm))
|
||||
return -EIO;
|
||||
|
||||
err = snd_ctl_add(ice->card, snd_ctl_new1(&snd_vt1724_mixer_pro_spdif_route, ice));
|
||||
if (err < 0)
|
||||
return err;
|
||||
if (!ice->own_routing) {
|
||||
err = snd_ctl_add(ice->card,
|
||||
snd_ctl_new1(&snd_vt1724_mixer_pro_spdif_route, ice));
|
||||
if (err < 0)
|
||||
return err;
|
||||
}
|
||||
|
||||
err = snd_ctl_add(ice->card, snd_ctl_new1(&snd_vt1724_spdif_switch, ice));
|
||||
if (err < 0)
|
||||
@ -2326,7 +2350,7 @@ static int __devinit snd_vt1724_build_controls(struct snd_ice1712 *ice)
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
if (ice->num_total_dacs > 0) {
|
||||
if (!ice->own_routing && ice->num_total_dacs > 0) {
|
||||
struct snd_kcontrol_new tmp = snd_vt1724_mixer_pro_analog_route;
|
||||
tmp.count = ice->num_total_dacs;
|
||||
if (ice->vt1720 && tmp.count > 2)
|
||||
|
||||
779
sound/pci/ice1712/maya44.c
Normal file
779
sound/pci/ice1712/maya44.c
Normal file
@ -0,0 +1,779 @@
|
||||
/*
|
||||
* ALSA driver for ICEnsemble VT1724 (Envy24HT)
|
||||
*
|
||||
* Lowlevel functions for ESI Maya44 cards
|
||||
*
|
||||
* Copyright (c) 2009 Takashi Iwai <tiwai@suse.de>
|
||||
* Based on the patches by Rainer Zimmermann <mail@lightshed.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/io.h>
|
||||
#include <sound/core.h>
|
||||
#include <sound/control.h>
|
||||
#include <sound/pcm.h>
|
||||
#include <sound/tlv.h>
|
||||
|
||||
#include "ice1712.h"
|
||||
#include "envy24ht.h"
|
||||
#include "maya44.h"
|
||||
|
||||
/* WM8776 register indexes */
|
||||
#define WM8776_REG_HEADPHONE_L 0x00
|
||||
#define WM8776_REG_HEADPHONE_R 0x01
|
||||
#define WM8776_REG_HEADPHONE_MASTER 0x02
|
||||
#define WM8776_REG_DAC_ATTEN_L 0x03
|
||||
#define WM8776_REG_DAC_ATTEN_R 0x04
|
||||
#define WM8776_REG_DAC_ATTEN_MASTER 0x05
|
||||
#define WM8776_REG_DAC_PHASE 0x06
|
||||
#define WM8776_REG_DAC_CONTROL 0x07
|
||||
#define WM8776_REG_DAC_MUTE 0x08
|
||||
#define WM8776_REG_DAC_DEEMPH 0x09
|
||||
#define WM8776_REG_DAC_IF_CONTROL 0x0a
|
||||
#define WM8776_REG_ADC_IF_CONTROL 0x0b
|
||||
#define WM8776_REG_MASTER_MODE_CONTROL 0x0c
|
||||
#define WM8776_REG_POWERDOWN 0x0d
|
||||
#define WM8776_REG_ADC_ATTEN_L 0x0e
|
||||
#define WM8776_REG_ADC_ATTEN_R 0x0f
|
||||
#define WM8776_REG_ADC_ALC1 0x10
|
||||
#define WM8776_REG_ADC_ALC2 0x11
|
||||
#define WM8776_REG_ADC_ALC3 0x12
|
||||
#define WM8776_REG_ADC_NOISE_GATE 0x13
|
||||
#define WM8776_REG_ADC_LIMITER 0x14
|
||||
#define WM8776_REG_ADC_MUX 0x15
|
||||
#define WM8776_REG_OUTPUT_MUX 0x16
|
||||
#define WM8776_REG_RESET 0x17
|
||||
|
||||
#define WM8776_NUM_REGS 0x18
|
||||
|
||||
/* clock ratio identifiers for snd_wm8776_set_rate() */
|
||||
#define WM8776_CLOCK_RATIO_128FS 0
|
||||
#define WM8776_CLOCK_RATIO_192FS 1
|
||||
#define WM8776_CLOCK_RATIO_256FS 2
|
||||
#define WM8776_CLOCK_RATIO_384FS 3
|
||||
#define WM8776_CLOCK_RATIO_512FS 4
|
||||
#define WM8776_CLOCK_RATIO_768FS 5
|
||||
|
||||
enum { WM_VOL_HP, WM_VOL_DAC, WM_VOL_ADC, WM_NUM_VOLS };
|
||||
enum { WM_SW_DAC, WM_SW_BYPASS, WM_NUM_SWITCHES };
|
||||
|
||||
struct snd_wm8776 {
|
||||
unsigned char addr;
|
||||
unsigned short regs[WM8776_NUM_REGS];
|
||||
unsigned char volumes[WM_NUM_VOLS][2];
|
||||
unsigned int switch_bits;
|
||||
};
|
||||
|
||||
struct snd_maya44 {
|
||||
struct snd_ice1712 *ice;
|
||||
struct snd_wm8776 wm[2];
|
||||
struct mutex mutex;
|
||||
};
|
||||
|
||||
|
||||
/* write the given register and save the data to the cache */
|
||||
static void wm8776_write(struct snd_ice1712 *ice, struct snd_wm8776 *wm,
|
||||
unsigned char reg, unsigned short val)
|
||||
{
|
||||
/*
|
||||
* WM8776 registers are up to 9 bits wide, bit 8 is placed in the LSB
|
||||
* of the address field
|
||||
*/
|
||||
snd_vt1724_write_i2c(ice, wm->addr,
|
||||
(reg << 1) | ((val >> 8) & 1),
|
||||
val & 0xff);
|
||||
wm->regs[reg] = val;
|
||||
}
|
||||
|
||||
/*
|
||||
* update the given register with and/or mask and save the data to the cache
|
||||
*/
|
||||
static int wm8776_write_bits(struct snd_ice1712 *ice, struct snd_wm8776 *wm,
|
||||
unsigned char reg,
|
||||
unsigned short mask, unsigned short val)
|
||||
{
|
||||
val |= wm->regs[reg] & ~mask;
|
||||
if (val != wm->regs[reg]) {
|
||||
wm8776_write(ice, wm, reg, val);
|
||||
return 1;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* WM8776 volume controls
|
||||
*/
|
||||
|
||||
struct maya_vol_info {
|
||||
unsigned int maxval; /* volume range: 0..maxval */
|
||||
unsigned char regs[2]; /* left and right registers */
|
||||
unsigned short mask; /* value mask */
|
||||
unsigned short offset; /* zero-value offset */
|
||||
unsigned short mute; /* mute bit */
|
||||
unsigned short update; /* update bits */
|
||||
unsigned char mux_bits[2]; /* extra bits for ADC mute */
|
||||
};
|
||||
|
||||
static struct maya_vol_info vol_info[WM_NUM_VOLS] = {
|
||||
[WM_VOL_HP] = {
|
||||
.maxval = 80,
|
||||
.regs = { WM8776_REG_HEADPHONE_L, WM8776_REG_HEADPHONE_R },
|
||||
.mask = 0x7f,
|
||||
.offset = 0x30,
|
||||
.mute = 0x00,
|
||||
.update = 0x180, /* update and zero-cross enable */
|
||||
},
|
||||
[WM_VOL_DAC] = {
|
||||
.maxval = 255,
|
||||
.regs = { WM8776_REG_DAC_ATTEN_L, WM8776_REG_DAC_ATTEN_R },
|
||||
.mask = 0xff,
|
||||
.offset = 0x01,
|
||||
.mute = 0x00,
|
||||
.update = 0x100, /* zero-cross enable */
|
||||
},
|
||||
[WM_VOL_ADC] = {
|
||||
.maxval = 91,
|
||||
.regs = { WM8776_REG_ADC_ATTEN_L, WM8776_REG_ADC_ATTEN_R },
|
||||
.mask = 0xff,
|
||||
.offset = 0xa5,
|
||||
.mute = 0xa5,
|
||||
.update = 0x100, /* update */
|
||||
.mux_bits = { 0x80, 0x40 }, /* ADCMUX bits */
|
||||
},
|
||||
};
|
||||
|
||||
/*
|
||||
* dB tables
|
||||
*/
|
||||
/* headphone output: mute, -73..+6db (1db step) */
|
||||
static const DECLARE_TLV_DB_SCALE(db_scale_hp, -7400, 100, 1);
|
||||
/* DAC output: mute, -127..0db (0.5db step) */
|
||||
static const DECLARE_TLV_DB_SCALE(db_scale_dac, -12750, 50, 1);
|
||||
/* ADC gain: mute, -21..+24db (0.5db step) */
|
||||
static const DECLARE_TLV_DB_SCALE(db_scale_adc, -2100, 50, 1);
|
||||
|
||||
static int maya_vol_info(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_info *uinfo)
|
||||
{
|
||||
unsigned int idx = kcontrol->private_value;
|
||||
struct maya_vol_info *vol = &vol_info[idx];
|
||||
|
||||
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
||||
uinfo->count = 2;
|
||||
uinfo->value.integer.min = 0;
|
||||
uinfo->value.integer.max = vol->maxval;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int maya_vol_get(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
|
||||
struct snd_wm8776 *wm =
|
||||
&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
|
||||
unsigned int idx = kcontrol->private_value;
|
||||
|
||||
mutex_lock(&chip->mutex);
|
||||
ucontrol->value.integer.value[0] = wm->volumes[idx][0];
|
||||
ucontrol->value.integer.value[1] = wm->volumes[idx][1];
|
||||
mutex_unlock(&chip->mutex);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int maya_vol_put(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
|
||||
struct snd_wm8776 *wm =
|
||||
&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
|
||||
unsigned int idx = kcontrol->private_value;
|
||||
struct maya_vol_info *vol = &vol_info[idx];
|
||||
unsigned int val, data;
|
||||
int ch, changed = 0;
|
||||
|
||||
mutex_lock(&chip->mutex);
|
||||
for (ch = 0; ch < 2; ch++) {
|
||||
val = ucontrol->value.integer.value[ch];
|
||||
if (val > vol->maxval)
|
||||
val = vol->maxval;
|
||||
if (val == wm->volumes[idx][ch])
|
||||
continue;
|
||||
if (!val)
|
||||
data = vol->mute;
|
||||
else
|
||||
data = (val - 1) + vol->offset;
|
||||
data |= vol->update;
|
||||
changed |= wm8776_write_bits(chip->ice, wm, vol->regs[ch],
|
||||
vol->mask | vol->update, data);
|
||||
if (vol->mux_bits[ch])
|
||||
wm8776_write_bits(chip->ice, wm, WM8776_REG_ADC_MUX,
|
||||
vol->mux_bits[ch],
|
||||
val ? 0 : vol->mux_bits[ch]);
|
||||
wm->volumes[idx][ch] = val;
|
||||
}
|
||||
mutex_unlock(&chip->mutex);
|
||||
return changed;
|
||||
}
|
||||
|
||||
/*
|
||||
* WM8776 switch controls
|
||||
*/
|
||||
|
||||
#define COMPOSE_SW_VAL(idx, reg, mask) ((idx) | ((reg) << 8) | ((mask) << 16))
|
||||
#define GET_SW_VAL_IDX(val) ((val) & 0xff)
|
||||
#define GET_SW_VAL_REG(val) (((val) >> 8) & 0xff)
|
||||
#define GET_SW_VAL_MASK(val) (((val) >> 16) & 0xff)
|
||||
|
||||
#define maya_sw_info snd_ctl_boolean_mono_info
|
||||
|
||||
static int maya_sw_get(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
|
||||
struct snd_wm8776 *wm =
|
||||
&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
|
||||
unsigned int idx = GET_SW_VAL_IDX(kcontrol->private_value);
|
||||
|
||||
ucontrol->value.integer.value[0] = (wm->switch_bits >> idx) & 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int maya_sw_put(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
|
||||
struct snd_wm8776 *wm =
|
||||
&chip->wm[snd_ctl_get_ioff(kcontrol, &ucontrol->id)];
|
||||
unsigned int idx = GET_SW_VAL_IDX(kcontrol->private_value);
|
||||
unsigned int mask, val;
|
||||
int changed;
|
||||
|
||||
mutex_lock(&chip->mutex);
|
||||
mask = 1 << idx;
|
||||
wm->switch_bits &= ~mask;
|
||||
val = ucontrol->value.integer.value[0];
|
||||
if (val)
|
||||
wm->switch_bits |= mask;
|
||||
mask = GET_SW_VAL_MASK(kcontrol->private_value);
|
||||
changed = wm8776_write_bits(chip->ice, wm,
|
||||
GET_SW_VAL_REG(kcontrol->private_value),
|
||||
mask, val ? mask : 0);
|
||||
mutex_unlock(&chip->mutex);
|
||||
return changed;
|
||||
}
|
||||
|
||||
/*
|
||||
* GPIO pins (known ones for maya44)
|
||||
*/
|
||||
#define GPIO_PHANTOM_OFF 2
|
||||
#define GPIO_MIC_RELAY 4
|
||||
#define GPIO_SPDIF_IN_INV 5
|
||||
#define GPIO_MUST_BE_0 7
|
||||
|
||||
/*
|
||||
* GPIO switch controls
|
||||
*/
|
||||
|
||||
#define COMPOSE_GPIO_VAL(shift, inv) ((shift) | ((inv) << 8))
|
||||
#define GET_GPIO_VAL_SHIFT(val) ((val) & 0xff)
|
||||
#define GET_GPIO_VAL_INV(val) (((val) >> 8) & 1)
|
||||
|
||||
static int maya_set_gpio_bits(struct snd_ice1712 *ice, unsigned int mask,
|
||||
unsigned int bits)
|
||||
{
|
||||
unsigned int data;
|
||||
data = snd_ice1712_gpio_read(ice);
|
||||
if ((data & mask) == bits)
|
||||
return 0;
|
||||
snd_ice1712_gpio_write(ice, (data & ~mask) | bits);
|
||||
return 1;
|
||||
}
|
||||
|
||||
#define maya_gpio_sw_info snd_ctl_boolean_mono_info
|
||||
|
||||
static int maya_gpio_sw_get(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
|
||||
unsigned int shift = GET_GPIO_VAL_SHIFT(kcontrol->private_value);
|
||||
unsigned int val;
|
||||
|
||||
val = (snd_ice1712_gpio_read(chip->ice) >> shift) & 1;
|
||||
if (GET_GPIO_VAL_INV(kcontrol->private_value))
|
||||
val = !val;
|
||||
ucontrol->value.integer.value[0] = val;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int maya_gpio_sw_put(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
|
||||
unsigned int shift = GET_GPIO_VAL_SHIFT(kcontrol->private_value);
|
||||
unsigned int val, mask;
|
||||
int changed;
|
||||
|
||||
mutex_lock(&chip->mutex);
|
||||
mask = 1 << shift;
|
||||
val = ucontrol->value.integer.value[0];
|
||||
if (GET_GPIO_VAL_INV(kcontrol->private_value))
|
||||
val = !val;
|
||||
val = val ? mask : 0;
|
||||
changed = maya_set_gpio_bits(chip->ice, mask, val);
|
||||
mutex_unlock(&chip->mutex);
|
||||
return changed;
|
||||
}
|
||||
|
||||
/*
|
||||
* capture source selection
|
||||
*/
|
||||
|
||||
/* known working input slots (0-4) */
|
||||
#define MAYA_LINE_IN 1 /* in-2 */
|
||||
#define MAYA_MIC_IN 4 /* in-5 */
|
||||
|
||||
static void wm8776_select_input(struct snd_maya44 *chip, int idx, int line)
|
||||
{
|
||||
wm8776_write_bits(chip->ice, &chip->wm[idx], WM8776_REG_ADC_MUX,
|
||||
0x1f, 1 << line);
|
||||
}
|
||||
|
||||
static int maya_rec_src_info(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_info *uinfo)
|
||||
{
|
||||
static char *texts[] = { "Line", "Mic" };
|
||||
|
||||
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
||||
uinfo->count = 1;
|
||||
uinfo->value.enumerated.items = ARRAY_SIZE(texts);
|
||||
if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
|
||||
uinfo->value.enumerated.item =
|
||||
uinfo->value.enumerated.items - 1;
|
||||
strcpy(uinfo->value.enumerated.name,
|
||||
texts[uinfo->value.enumerated.item]);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int maya_rec_src_get(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
|
||||
int sel;
|
||||
|
||||
if (snd_ice1712_gpio_read(chip->ice) & (1 << GPIO_MIC_RELAY))
|
||||
sel = 1;
|
||||
else
|
||||
sel = 0;
|
||||
ucontrol->value.enumerated.item[0] = sel;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int maya_rec_src_put(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
|
||||
int sel = ucontrol->value.enumerated.item[0];
|
||||
int changed;
|
||||
|
||||
mutex_lock(&chip->mutex);
|
||||
changed = maya_set_gpio_bits(chip->ice, GPIO_MIC_RELAY,
|
||||
sel ? GPIO_MIC_RELAY : 0);
|
||||
wm8776_select_input(chip, 0, sel ? MAYA_MIC_IN : MAYA_LINE_IN);
|
||||
mutex_unlock(&chip->mutex);
|
||||
return changed;
|
||||
}
|
||||
|
||||
/*
|
||||
* Maya44 routing switch settings have different meanings than the standard
|
||||
* ice1724 switches as defined in snd_vt1724_pro_route_info (ice1724.c).
|
||||
*/
|
||||
static int maya_pb_route_info(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_info *uinfo)
|
||||
{
|
||||
static char *texts[] = {
|
||||
"PCM Out", /* 0 */
|
||||
"Input 1", "Input 2", "Input 3", "Input 4"
|
||||
};
|
||||
|
||||
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
||||
uinfo->count = 1;
|
||||
uinfo->value.enumerated.items = ARRAY_SIZE(texts);
|
||||
if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
|
||||
uinfo->value.enumerated.item =
|
||||
uinfo->value.enumerated.items - 1;
|
||||
strcpy(uinfo->value.enumerated.name,
|
||||
texts[uinfo->value.enumerated.item]);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int maya_pb_route_shift(int idx)
|
||||
{
|
||||
static const unsigned char shift[10] =
|
||||
{ 8, 20, 0, 3, 11, 23, 14, 26, 17, 29 };
|
||||
return shift[idx % 10];
|
||||
}
|
||||
|
||||
static int maya_pb_route_get(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
|
||||
int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
|
||||
ucontrol->value.enumerated.item[0] =
|
||||
snd_ice1724_get_route_val(chip->ice, maya_pb_route_shift(idx));
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int maya_pb_route_put(struct snd_kcontrol *kcontrol,
|
||||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct snd_maya44 *chip = snd_kcontrol_chip(kcontrol);
|
||||
int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
|
||||
return snd_ice1724_put_route_val(chip->ice,
|
||||
ucontrol->value.enumerated.item[0],
|
||||
maya_pb_route_shift(idx));
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* controls to be added
|
||||
*/
|
||||
|
||||
static struct snd_kcontrol_new maya_controls[] __devinitdata = {
|
||||
{
|
||||
.name = "Crossmix Playback Volume",
|
||||
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
|
||||
SNDRV_CTL_ELEM_ACCESS_TLV_READ,
|
||||
.info = maya_vol_info,
|
||||
.get = maya_vol_get,
|
||||
.put = maya_vol_put,
|
||||
.tlv = { .p = db_scale_hp },
|
||||
.private_value = WM_VOL_HP,
|
||||
.count = 2,
|
||||
},
|
||||
{
|
||||
.name = "PCM Playback Volume",
|
||||
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
|
||||
SNDRV_CTL_ELEM_ACCESS_TLV_READ,
|
||||
.info = maya_vol_info,
|
||||
.get = maya_vol_get,
|
||||
.put = maya_vol_put,
|
||||
.tlv = { .p = db_scale_dac },
|
||||
.private_value = WM_VOL_DAC,
|
||||
.count = 2,
|
||||
},
|
||||
{
|
||||
.name = "Line Capture Volume",
|
||||
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
|
||||
SNDRV_CTL_ELEM_ACCESS_TLV_READ,
|
||||
.info = maya_vol_info,
|
||||
.get = maya_vol_get,
|
||||
.put = maya_vol_put,
|
||||
.tlv = { .p = db_scale_adc },
|
||||
.private_value = WM_VOL_ADC,
|
||||
.count = 2,
|
||||
},
|
||||
{
|
||||
.name = "PCM Playback Switch",
|
||||
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||
.info = maya_sw_info,
|
||||
.get = maya_sw_get,
|
||||
.put = maya_sw_put,
|
||||
.private_value = COMPOSE_SW_VAL(WM_SW_DAC,
|
||||
WM8776_REG_OUTPUT_MUX, 0x01),
|
||||
.count = 2,
|
||||
},
|
||||
{
|
||||
.name = "Bypass Playback Switch",
|
||||
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||
.info = maya_sw_info,
|
||||
.get = maya_sw_get,
|
||||
.put = maya_sw_put,
|
||||
.private_value = COMPOSE_SW_VAL(WM_SW_BYPASS,
|
||||
WM8776_REG_OUTPUT_MUX, 0x04),
|
||||
.count = 2,
|
||||
},
|
||||
{
|
||||
.name = "Capture Source",
|
||||
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||
.info = maya_rec_src_info,
|
||||
.get = maya_rec_src_get,
|
||||
.put = maya_rec_src_put,
|
||||
},
|
||||
{
|
||||
.name = "Mic Phantom Power Switch",
|
||||
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||
.info = maya_gpio_sw_info,
|
||||
.get = maya_gpio_sw_get,
|
||||
.put = maya_gpio_sw_put,
|
||||
.private_value = COMPOSE_GPIO_VAL(GPIO_PHANTOM_OFF, 1),
|
||||
},
|
||||
{
|
||||
.name = "SPDIF Capture Switch",
|
||||
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||
.info = maya_gpio_sw_info,
|
||||
.get = maya_gpio_sw_get,
|
||||
.put = maya_gpio_sw_put,
|
||||
.private_value = COMPOSE_GPIO_VAL(GPIO_SPDIF_IN_INV, 1),
|
||||
},
|
||||
{
|
||||
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
||||
.name = "H/W Playback Route",
|
||||
.info = maya_pb_route_info,
|
||||
.get = maya_pb_route_get,
|
||||
.put = maya_pb_route_put,
|
||||
.count = 4, /* FIXME: do controls 5-9 have any meaning? */
|
||||
},
|
||||
};
|
||||
|
||||
static int __devinit maya44_add_controls(struct snd_ice1712 *ice)
|
||||
{
|
||||
int err, i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(maya_controls); i++) {
|
||||
err = snd_ctl_add(ice->card, snd_ctl_new1(&maya_controls[i],
|
||||
ice->spec));
|
||||
if (err < 0)
|
||||
return err;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* initialize a wm8776 chip
|
||||
*/
|
||||
static void __devinit wm8776_init(struct snd_ice1712 *ice,
|
||||
struct snd_wm8776 *wm, unsigned int addr)
|
||||
{
|
||||
static const unsigned short inits_wm8776[] = {
|
||||
0x02, 0x100, /* R2: headphone L+R muted + update */
|
||||
0x05, 0x100, /* R5: DAC output L+R muted + update */
|
||||
0x06, 0x000, /* R6: DAC output phase normal */
|
||||
0x07, 0x091, /* R7: DAC enable zero cross detection,
|
||||
normal output */
|
||||
0x08, 0x000, /* R8: DAC soft mute off */
|
||||
0x09, 0x000, /* R9: no deemph, DAC zero detect disabled */
|
||||
0x0a, 0x022, /* R10: DAC I2C mode, std polarities, 24bit */
|
||||
0x0b, 0x022, /* R11: ADC I2C mode, std polarities, 24bit,
|
||||
highpass filter enabled */
|
||||
0x0c, 0x042, /* R12: ADC+DAC slave, ADC+DAC 44,1kHz */
|
||||
0x0d, 0x000, /* R13: all power up */
|
||||
0x0e, 0x100, /* R14: ADC left muted,
|
||||
enable zero cross detection */
|
||||
0x0f, 0x100, /* R15: ADC right muted,
|
||||
enable zero cross detection */
|
||||
/* R16: ALC...*/
|
||||
0x11, 0x000, /* R17: disable ALC */
|
||||
/* R18: ALC...*/
|
||||
/* R19: noise gate...*/
|
||||
0x15, 0x000, /* R21: ADC input mux init, mute all inputs */
|
||||
0x16, 0x001, /* R22: output mux, select DAC */
|
||||
0xff, 0xff
|
||||
};
|
||||
|
||||
const unsigned short *ptr;
|
||||
unsigned char reg;
|
||||
unsigned short data;
|
||||
|
||||
wm->addr = addr;
|
||||
/* enable DAC output; mute bypass, aux & all inputs */
|
||||
wm->switch_bits = (1 << WM_SW_DAC);
|
||||
|
||||
ptr = inits_wm8776;
|
||||
while (*ptr != 0xff) {
|
||||
reg = *ptr++;
|
||||
data = *ptr++;
|
||||
wm8776_write(ice, wm, reg, data);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* change the rate on the WM8776 codecs.
|
||||
* this assumes that the VT17xx's rate is changed by the calling function.
|
||||
* NOTE: even though the WM8776's are running in slave mode and rate
|
||||
* selection is automatic, we need to call snd_wm8776_set_rate() here
|
||||
* to make sure some flags are set correctly.
|
||||
*/
|
||||
static void set_rate(struct snd_ice1712 *ice, unsigned int rate)
|
||||
{
|
||||
struct snd_maya44 *chip = ice->spec;
|
||||
unsigned int ratio, adc_ratio, val;
|
||||
int i;
|
||||
|
||||
switch (rate) {
|
||||
case 192000:
|
||||
ratio = WM8776_CLOCK_RATIO_128FS;
|
||||
break;
|
||||
case 176400:
|
||||
ratio = WM8776_CLOCK_RATIO_128FS;
|
||||
break;
|
||||
case 96000:
|
||||
ratio = WM8776_CLOCK_RATIO_256FS;
|
||||
break;
|
||||
case 88200:
|
||||
ratio = WM8776_CLOCK_RATIO_384FS;
|
||||
break;
|
||||
case 48000:
|
||||
ratio = WM8776_CLOCK_RATIO_512FS;
|
||||
break;
|
||||
case 44100:
|
||||
ratio = WM8776_CLOCK_RATIO_512FS;
|
||||
break;
|
||||
case 32000:
|
||||
ratio = WM8776_CLOCK_RATIO_768FS;
|
||||
break;
|
||||
case 0:
|
||||
/* no hint - S/PDIF input is master, simply return */
|
||||
return;
|
||||
default:
|
||||
snd_BUG();
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* this currently sets the same rate for ADC and DAC, but limits
|
||||
* ADC rate to 256X (96kHz). For 256X mode (96kHz), this sets ADC
|
||||
* oversampling to 64x, as recommended by WM8776 datasheet.
|
||||
* Setting the rate is not really necessary in slave mode.
|
||||
*/
|
||||
adc_ratio = ratio;
|
||||
if (adc_ratio < WM8776_CLOCK_RATIO_256FS)
|
||||
adc_ratio = WM8776_CLOCK_RATIO_256FS;
|
||||
|
||||
val = adc_ratio;
|
||||
if (adc_ratio == WM8776_CLOCK_RATIO_256FS)
|
||||
val |= 8;
|
||||
val |= ratio << 4;
|
||||
|
||||
mutex_lock(&chip->mutex);
|
||||
for (i = 0; i < 2; i++)
|
||||
wm8776_write_bits(ice, &chip->wm[i],
|
||||
WM8776_REG_MASTER_MODE_CONTROL,
|
||||
0x180, val);
|
||||
mutex_unlock(&chip->mutex);
|
||||
}
|
||||
|
||||
/*
|
||||
* supported sample rates (to override the default one)
|
||||
*/
|
||||
|
||||
static unsigned int rates[] = {
|
||||
32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000
|
||||
};
|
||||
|
||||
/* playback rates: 32..192 kHz */
|
||||
static struct snd_pcm_hw_constraint_list dac_rates = {
|
||||
.count = ARRAY_SIZE(rates),
|
||||
.list = rates,
|
||||
.mask = 0
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* chip addresses on I2C bus
|
||||
*/
|
||||
static unsigned char wm8776_addr[2] __devinitdata = {
|
||||
0x34, 0x36, /* codec 0 & 1 */
|
||||
};
|
||||
|
||||
/*
|
||||
* initialize the chip
|
||||
*/
|
||||
static int __devinit maya44_init(struct snd_ice1712 *ice)
|
||||
{
|
||||
int i;
|
||||
struct snd_maya44 *chip;
|
||||
|
||||
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
|
||||
if (!chip)
|
||||
return -ENOMEM;
|
||||
mutex_init(&chip->mutex);
|
||||
chip->ice = ice;
|
||||
ice->spec = chip;
|
||||
|
||||
/* initialise codecs */
|
||||
ice->num_total_dacs = 4;
|
||||
ice->num_total_adcs = 4;
|
||||
ice->akm_codecs = 0;
|
||||
|
||||
for (i = 0; i < 2; i++) {
|
||||
wm8776_init(ice, &chip->wm[i], wm8776_addr[i]);
|
||||
wm8776_select_input(chip, i, MAYA_LINE_IN);
|
||||
}
|
||||
|
||||
/* set card specific rates */
|
||||
ice->hw_rates = &dac_rates;
|
||||
|
||||
/* register change rate notifier */
|
||||
ice->gpio.set_pro_rate = set_rate;
|
||||
|
||||
/* RDMA1 (2nd input channel) is used for ADC by default */
|
||||
ice->force_rdma1 = 1;
|
||||
|
||||
/* have an own routing control */
|
||||
ice->own_routing = 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Maya44 boards don't provide the EEPROM data except for the vendor IDs.
|
||||
* hence the driver needs to sets up it properly.
|
||||
*/
|
||||
|
||||
static unsigned char maya44_eeprom[] __devinitdata = {
|
||||
[ICE_EEP2_SYSCONF] = 0x45,
|
||||
/* clock xin1=49.152MHz, mpu401, 2 stereo ADCs+DACs */
|
||||
[ICE_EEP2_ACLINK] = 0x80,
|
||||
/* I2S */
|
||||
[ICE_EEP2_I2S] = 0xf8,
|
||||
/* vol, 96k, 24bit, 192k */
|
||||
[ICE_EEP2_SPDIF] = 0xc3,
|
||||
/* enable spdif out, spdif out supp, spdif-in, ext spdif out */
|
||||
[ICE_EEP2_GPIO_DIR] = 0xff,
|
||||
[ICE_EEP2_GPIO_DIR1] = 0xff,
|
||||
[ICE_EEP2_GPIO_DIR2] = 0xff,
|
||||
[ICE_EEP2_GPIO_MASK] = 0/*0x9f*/,
|
||||
[ICE_EEP2_GPIO_MASK1] = 0/*0xff*/,
|
||||
[ICE_EEP2_GPIO_MASK2] = 0/*0x7f*/,
|
||||
[ICE_EEP2_GPIO_STATE] = (1 << GPIO_PHANTOM_OFF) |
|
||||
(1 << GPIO_SPDIF_IN_INV),
|
||||
[ICE_EEP2_GPIO_STATE1] = 0x00,
|
||||
[ICE_EEP2_GPIO_STATE2] = 0x00,
|
||||
};
|
||||
|
||||
/* entry point */
|
||||
struct snd_ice1712_card_info snd_vt1724_maya44_cards[] __devinitdata = {
|
||||
{
|
||||
.subvendor = VT1724_SUBDEVICE_MAYA44,
|
||||
.name = "ESI Maya44",
|
||||
.model = "maya44",
|
||||
.chip_init = maya44_init,
|
||||
.build_controls = maya44_add_controls,
|
||||
.eeprom_size = sizeof(maya44_eeprom),
|
||||
.eeprom_data = maya44_eeprom,
|
||||
},
|
||||
{ } /* terminator */
|
||||
};
|
||||
10
sound/pci/ice1712/maya44.h
Normal file
10
sound/pci/ice1712/maya44.h
Normal file
@ -0,0 +1,10 @@
|
||||
#ifndef __SOUND_MAYA44_H
|
||||
#define __SOUND_MAYA44_H
|
||||
|
||||
#define MAYA44_DEVICE_DESC "{ESI,Maya44},"
|
||||
|
||||
#define VT1724_SUBDEVICE_MAYA44 0x34315441 /* Maya44 */
|
||||
|
||||
extern struct snd_ice1712_card_info snd_vt1724_maya44_cards[];
|
||||
|
||||
#endif /* __SOUND_MAYA44_H */
|
||||
Loading…
Reference in New Issue
Block a user