AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-19 05:58:42 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

Bit of cleanup for the cortex-a9 uarts to have that soc-specific

Browse Source 
spare-compatible as all others have, conversion to gpio constants
 and addition of rk3288 qos nodes that need to be saved before a
 power-domain gets turned off.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAliBUsIQHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgZKBB/9BVOysNvR/vLcao9jlU/an7c5vAwBdDl/G
 uvsAgVAYRT2FUPcy7LPIQCoQOkk9HA3kMwiKVJH+hGQ+/0FdrKZvKkln/Yb/bT+9
 GgQT2NblgNNDMfE76xQM0c7Y7Kj1oDrkGaAmdumnUPOSwMnSlxKD5j3fS2k4fz/t
 ZOnqHxfEVDldmPIe4C58X5aqsQ4OmAgE7uiykZ4P3Vc0le71/QtJ4jsx4kkXNh9l
 1+tGDfc1axmze/rEohw+BbNm3H5l8xMKFURlNE1Sr4dbW1y4o99mG7JVuxxfAQqd
 XYP76I2foNtaxKgW29sQs0vopw9UimUiIH9i8xu4UsOWoj6N29Gj
 =B1HN
 -----END PGP SIGNATURE-----

Merge tag 'v4.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Bit of cleanup for the cortex-a9 uarts to have that soc-specific
spare-compatible as all others have, conversion to gpio constants
and addition of rk3288 qos nodes that need to be saved before a
power-domain gets turned off.

* tag 'v4.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add soc-specific uart compatibles for rk3066/rk3188
  ARM: dts: rockchip: use pin constants to describe gpios
  ARM: dts: rockchip: add qos node for rk3288

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2017-01-29 14:42:05 -08:00
commit eb9503e99a
37 changed files with 252 additions and 160 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/boot/dts/rk3036-evb.dts
View File

@ -56,7 +56,7 @@ &emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
phy = <&phy0>;
phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
phy-reset-duration = <10>; /* millisecond */
status = "okay";

12
arch/arm/boot/dts/rk3036-kylin.dts
View File

@ -55,7 +55,7 @@ leds: gpio-leds {
compatible = "gpio-leds";
work {
gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
label = "kylin:red:led";
pinctrl-names = "default";
pinctrl-0 = <&led_ctl>;
@ -74,9 +74,9 @@ sdio_pwrseq: sdio-pwrseq {
* - SDIO_RESET_L_WL_RST
* - SDIO_RESET_L_BT_EN
*/
reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
<&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */
<&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */
reset-gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
<&gpio0 RK_PD3 GPIO_ACTIVE_LOW>, /* WL_RST */
<&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; /* BT_EN */
};
sound {
@ -121,7 +121,7 @@ &emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
phy = <&phy0>;
phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
phy-reset-duration = <10>; /* millisecond */
status = "okay";
@ -148,7 +148,7 @@ rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio2>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller;

8
arch/arm/boot/dts/rk3066a-bqcurie2.dts
View File

@ -71,7 +71,7 @@ vcc_sd0: fixed-regulator {
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
@ -81,7 +81,7 @@ gpio-keys {
autorepeat;
power {
gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@ -89,7 +89,7 @@ power {
debounce-interval = <100>;
};
volume-down {
gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
linux,code = <KEY_VOLUMEDOWN>;
label = "GPIO Key Vol-";
linux,input-type = <1>;
@ -111,7 +111,7 @@ tps: tps@2d {
reg = <0x2d>;
interrupt-parent = <&gpio6>;
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
vcc5-supply = <&vcc_io>;
vcc6-supply = <&vcc_io>;

6
arch/arm/boot/dts/rk3066a-marsboard.dts
View File

@ -69,7 +69,7 @@ vcc_sd0: sdmmc-regulator {
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
@ -91,7 +91,7 @@ tps: tps@2d {
reg = <0x2d>;
interrupt-parent = <&gpio6>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
vcc1-supply = <&vsys>;
vcc2-supply = <&vsys>;
@ -186,7 +186,7 @@ &emac {
phy0: ethernet-phy@0 {
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
};
};

10
arch/arm/boot/dts/rk3066a-mk808.dts
View File

@ -61,7 +61,7 @@ gpio-leds {
blue {
label = "mk808:blue:power";
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "default-on";
};
@ -77,7 +77,7 @@ vcc_io: vcc-io {
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&host_drv>;
pinctrl-names = "default";
regulator-always-on;
@ -91,7 +91,7 @@ vcc_host: usb-host-regulator {
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&otg_drv>;
pinctrl-names = "default";
regulator-always-on;
@ -104,7 +104,7 @@ vcc_otg: usb-otg-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sdmmc_pwr>;
pinctrl-names = "default";
regulator-name = "vcc_sd";
@ -117,7 +117,7 @@ vcc_sd: sdmmc-regulator {
vcc_wifi: sdio-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&wifi_pwr>;
pinctrl-names = "default";
regulator-name = "vcc_wifi";

18
arch/arm/boot/dts/rk3066a-rayeager.dts
View File

@ -55,7 +55,7 @@ memory@60000000 {
ir: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio6 1 GPIO_ACTIVE_LOW>;
gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
@ -65,7 +65,7 @@ keys: gpio-keys {
power {
wakeup-source;
gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
@ -115,7 +115,7 @@ vcc_emmc: emmc-regulator {
vcc_sata: sata-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sata_pwr>;
regulator-name = "usb_5v";
@ -127,7 +127,7 @@ vcc_sata: sata-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@ -140,7 +140,7 @@ vcc_sd: sdmmc-regulator {
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_drv>;
regulator-name = "host-pwr";
@ -153,7 +153,7 @@ vcc_host: usb-host-regulator {
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_drv>;
regulator-name = "vcc_otg";
@ -201,7 +201,7 @@ ak8963: ak8963@0d {
compatible = "asahi-kasei,ak8975";
reg = <0x0d>;
interrupt-parent = <&gpio4>;
interrupts = <17 IRQ_TYPE_EDGE_RISING>;
interrupts = <RK_PC1 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&comp_int>;
};
@ -210,7 +210,7 @@ mma8452: mma8452@1d {
compatible = "fsl,mma8452";
reg = <0x1d>;
interrupt-parent = <&gpio4>;
interrupts = <16 IRQ_TYPE_EDGE_RISING>;
interrupts = <RK_PC0 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&gsensor_int>;
};
@ -223,7 +223,7 @@ &i2c1 {
tps: tps@2d {
reg = <0x2d>;
interrupt-parent = <&gpio6>;
interrupts = <4 IRQ_TYPE_EDGE_RISING>;
interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>, <&pwr_hold>;

4
arch/arm/boot/dts/rk3066a.dtsi
View File

@ -687,6 +687,7 @@ &spi1 {
};
&uart0 {
compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
dmas = <&dmac1_s 0>, <&dmac1_s 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
@ -694,6 +695,7 @@ &uart0 {
};
&uart1 {
compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
dmas = <&dmac1_s 2>, <&dmac1_s 3>;
dma-names = "tx", "rx";
pinctrl-names = "default";
@ -701,6 +703,7 @@ &uart1 {
};
&uart2 {
compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
dmas = <&dmac2 6>, <&dmac2 7>;
dma-names = "tx", "rx";
pinctrl-names = "default";
@ -708,6 +711,7 @@ &uart2 {
};
&uart3 {
compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
dmas = <&dmac2 8>, <&dmac2 9>;
dma-names = "tx", "rx";
pinctrl-names = "default";

10
arch/arm/boot/dts/rk3188-px3-evb.dts
View File

@ -62,7 +62,7 @@ gpio-keys {
autorepeat;
power {
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@ -102,7 +102,7 @@ accelerometer@18 {
compatible = "bosch,bma250";
reg = <0x18>;
interrupt-parent = <&gpio0>;
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
};
};
@ -114,7 +114,7 @@ rk808: pmic@1c {
compatible = "rockchip,rk818";
reg = <0x1c>;
interrupt-parent = <&gpio0>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
@ -247,8 +247,8 @@ gsl1680: touchscreen@40 {
compatible = "silead,gsl1680";
reg = <0x40>;
interrupt-parent = <&gpio1>;
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>;
power-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
touchscreen-size-x = <800>;
touchscreen-size-y = <1280>;
silead,max-fingers = <5>;

20
arch/arm/boot/dts/rk3188-radxarock.dts
View File

@ -58,7 +58,7 @@ gpio-keys {
autorepeat;
power {
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@ -72,19 +72,19 @@ gpio-leds {
green {
label = "rock:green:user1";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
blue {
label = "rock:blue:user2";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
sleep {
label = "rock:red:power";
gpios = <&gpio0 15 0>;
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
@ -106,7 +106,7 @@ spdif_out: spdif-out {
ir_recv: gpio-ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio0 10 1>;
gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_recv_pin>;
};
@ -114,7 +114,7 @@ ir_recv: gpio-ir-receiver {
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "otg-vbus";
@ -129,7 +129,7 @@ vcc_sd0: sdmmc-regulator {
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
@ -137,7 +137,7 @@ vcc_sd0: sdmmc-regulator {
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "host-pwr";
@ -168,7 +168,7 @@ &emac {
phy0: ethernet-phy@0 {
reg = <0>;
interrupt-parent = <&gpio3>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
};
};
@ -184,7 +184,7 @@ rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&rtc_int>;
#clock-cells = <0>;

4
arch/arm/boot/dts/rk3188.dtsi
View File

@ -599,21 +599,25 @@ &spi1 {
};
&uart0 {
compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
};
&uart1 {
compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer>;
};
&uart2 {
compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
pinctrl-names = "default";
pinctrl-0 = <&uart2_xfer>;
};
&uart3 {
compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
pinctrl-names = "default";
pinctrl-0 = <&uart3_xfer>;
};

2
arch/arm/boot/dts/rk3229-evb.dts
View File

@ -77,7 +77,7 @@ &gmac {
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
snps,reset-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
tx_delay = <0x30>;

6
arch/arm/boot/dts/rk3288-evb-act8846.dts
View File

@ -47,7 +47,7 @@ / {
vcc_lcd: vcc-lcd {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
regulator-name = "vcc_lcd";
@ -57,7 +57,7 @@ vcc_lcd: vcc-lcd {
vcc_wl: vcc-wl {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_pwr>;
regulator-name = "vcc_wl";
@ -96,7 +96,7 @@ hym8563@51 {
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;

2
arch/arm/boot/dts/rk3288-evb-rk808.dts
View File

@ -52,7 +52,7 @@ rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller;

14
arch/arm/boot/dts/rk3288-evb.dtsi
View File

@ -84,7 +84,7 @@ backlight: backlight {
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <128>;
enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
@ -100,7 +100,7 @@ ext_gmac: external-gmac-clock {
panel: panel {
compatible ="lg,lp079qx1-sp0v", "simple-panel";
backlight = <&backlight>;
enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&lcd_cs>;
ports {
@ -120,7 +120,7 @@ gpio-keys {
pinctrl-0 = <&pwrbtn>;
power {
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@ -133,7 +133,7 @@ power {
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@ -144,7 +144,7 @@ vcc_host: vcc-host-regulator {
vcc_phy: vcc-phy-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&eth_phy_pwr>;
regulator-name = "vcc_phy";
@ -170,7 +170,7 @@ vcc_sys: vsys-regulator {
*/
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@ -236,7 +236,7 @@ &gmac {
phy-supply = <&vcc_phy>;
phy-mode = "rgmii";
clock_in_out = "input";
snps,reset-gpio = <&gpio4 7 0>;
snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>;

6
arch/arm/boot/dts/rk3288-fennec.dts
View File

@ -93,7 +93,7 @@ &gmac {
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "okay";
@ -111,7 +111,7 @@ rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
@ -345,7 +345,7 @@ &uart2 {
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&host_drv>;
vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
vbus_drv-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
status = "okay";
};

2
arch/arm/boot/dts/rk3288-firefly-beta.dts
View File

@ -49,7 +49,7 @@ / {
};
&ir {
gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>;
};
&pinctrl {

2
arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
View File

@ -96,7 +96,7 @@ &gmac {
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "ok";

26
arch/arm/boot/dts/rk3288-firefly-reload.dts
View File

@ -53,7 +53,7 @@ gpio-keys {
power {
wakeup-source;
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
@ -63,14 +63,14 @@ power {
ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
};
leds {
compatible = "gpio-leds";
power {
gpios = <&gpio8 2 GPIO_ACTIVE_LOW>;
gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
label = "firefly:blue:power";
pinctrl-names = "default";
pinctrl-0 = <&power_led>;
@ -78,7 +78,7 @@ power {
};
work {
gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
label = "firefly:blue:user";
linux,default-trigger = "rc-feedback";
pinctrl-names = "default";
@ -92,7 +92,7 @@ sdio_pwrseq: sdio-pwrseq {
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable>;
reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
};
sound {
@ -112,7 +112,7 @@ spdif_out: spdif-out {
vcc_host_5v: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host_5v";
@ -133,7 +133,7 @@ vcc_5v: vcc_sys: vsys-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@ -146,7 +146,7 @@ vcc_sd: sdmmc-regulator {
vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v";
@ -159,7 +159,7 @@ vcc_otg_5v: usb-otg-regulator {
dovdd_1v8: dovdd-1v8-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "dovdd_1v8";
@ -171,7 +171,7 @@ dovdd_1v8: dovdd-1v8-regulator {
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
@ -183,7 +183,7 @@ vcc28_dvp: vcc28-dvp-regulator {
af_28: af_28-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "af_28";
@ -195,7 +195,7 @@ af_28: af_28-regulator {
dvdd_1v2: af_28-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cif_pwr>;
regulator-name = "dvdd_1v2";
@ -221,7 +221,7 @@ hym8563: hym8563@51 {
clock-frequency = <32768>;
clock-output-names = "xin32k";
interrupt-parent = <&gpio7>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&rtc_int>;
};

2
arch/arm/boot/dts/rk3288-firefly.dts
View File

@ -49,7 +49,7 @@ / {
};
&ir {
gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
};
&pinctrl {

18
arch/arm/boot/dts/rk3288-firefly.dtsi
View File

@ -75,7 +75,7 @@ keys: gpio-keys {
power {
wakeup-source;
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
@ -87,7 +87,7 @@ leds {
compatible = "gpio-leds";
work {
gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
label = "firefly:blue:user";
linux,default-trigger = "rc-feedback";
pinctrl-names = "default";
@ -95,7 +95,7 @@ work {
};
power {
gpios = <&gpio8 2 GPIO_ACTIVE_LOW>;
gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
label = "firefly:green:power";
linux,default-trigger = "default-on";
pinctrl-names = "default";
@ -114,7 +114,7 @@ vbat_wl: vcc_sys: vsys-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@ -145,7 +145,7 @@ vcc_5v: usb-regulator {
vcc_host_5v: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host_5v";
@ -158,7 +158,7 @@ vcc_host_5v: usb-host-regulator {
vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v";
@ -175,7 +175,7 @@ vcc_otg_5v: usb-otg-regulator {
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
@ -213,7 +213,7 @@ &gmac {
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "ok";
@ -260,7 +260,7 @@ hym8563: hym8563@51 {
clock-frequency = <32768>;
clock-output-names = "xin32k";
interrupt-parent = <&gpio7>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&rtc_int>;
};

8
arch/arm/boot/dts/rk3288-miqi.dts
View File

@ -68,7 +68,7 @@ leds {
compatible = "gpio-leds";
work {
gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_LOW>;
label = "miqi:green:user";
linux,default-trigger = "default-on";
pinctrl-names = "default";
@ -87,7 +87,7 @@ vcc_flash: flash-regulator {
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@ -99,7 +99,7 @@ vcc_host: usb-host-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@ -146,7 +146,7 @@ &gmac {
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "ok";

8
arch/arm/boot/dts/rk3288-popmetal.dts
View File

@ -180,7 +180,7 @@ &gmac {
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
clock_in_out = "input";
snps,reset-gpio = <&gpio4 RK_PB0 0>;
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>;
@ -205,7 +205,7 @@ rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller;
@ -390,7 +390,7 @@ ak8963: ak8963@0d {
compatible = "asahi-kasei,ak8975";
reg = <0x0d>;
interrupt-parent = <&gpio8>;
interrupts = <1 IRQ_TYPE_EDGE_RISING>;
interrupts = <RK_PA1 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&comp_int>;
vdd-supply = <&vcc_io>;
@ -409,7 +409,7 @@ mma8452: mma8452@1d {
compatible = "fsl,mma8452";
reg = <0x1d>;
interrupt-parent = <&gpio8>;
interrupts = <0 IRQ_TYPE_EDGE_RISING>;
interrupts = <RK_PA0 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&gsensor_int>;
};

14
arch/arm/boot/dts/rk3288-r89.dts
View File

@ -68,7 +68,7 @@ gpio-keys {
pinctrl-0 = <&pwrbtn>;
power {
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
@ -79,7 +79,7 @@ power {
ir: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
@ -87,7 +87,7 @@ ir: ir-receiver {
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@ -98,7 +98,7 @@ vcc_host: vcc-host-regulator {
vcc_otg: vcc-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg";
@ -111,7 +111,7 @@ vcc_sdmmc: sdmmc-regulator {
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
@ -134,7 +134,7 @@ &gmac {
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
clock_in_out = "input";
snps,reset-gpio = <&gpio4 7 0>;
snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>;
@ -187,7 +187,7 @@ rtc@51 {
#clock-cells = <0>;
clock-output-names = "xin32k";
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
};

4
arch/arm/boot/dts/rk3288-rock2-som.dtsi
View File

@ -51,7 +51,7 @@ emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
};
ext_gmac: external-gmac-clock {
@ -106,7 +106,7 @@ &gmac {
phy-supply = <&vccio_pmu>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins &phy_rst>;
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 30000>;
rx_delay = <0x10>;

14
arch/arm/boot/dts/rk3288-rock2-square.dts
View File

@ -53,13 +53,13 @@ gpio-leds {
compatible = "gpio-leds";
heartbeat {
gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>;
label = "rock2:green:state1";
linux,default-trigger = "heartbeat";
};
mmc {
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
label = "rock2:blue:state2";
linux,default-trigger = "mmc0";
};
@ -67,7 +67,7 @@ mmc {
ir: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
@ -92,13 +92,13 @@ sdio_pwrseq: sdio-pwrseq {
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable>;
reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
};
vcc_usb_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
/* Always on as the rockchip usb phy doesn't have a vbus-supply
@ -110,7 +110,7 @@ vcc_usb_host: vcc-host-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@ -166,7 +166,7 @@ hym8563: hym8563@51 {
clock-frequency = <32768>;
clock-output-names = "xin32k";
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;

8
arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
View File

@ -17,8 +17,8 @@ sound {
rockchip,model = "VEYRON-I2S";
rockchip,i2s-controller = <&i2s>;
rockchip,audio-codec = <&max98090>;
rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>;
rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>;
rockchip,headset-codec = <&headsetcodec>;
};
};
@ -28,7 +28,7 @@ max98090: max98090@10 {
compatible = "maxim,max98090";
reg = <0x10>;
interrupt-parent = <&gpio6>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
interrupts = <RK_PA7 IRQ_TYPE_EDGE_FALLING>;
clock-names = "mclk";
clocks = <&cru SCLK_I2S0_OUT>;
pinctrl-names = "default";
@ -41,7 +41,7 @@ headsetcodec: ts3a227e@3b {
compatible = "ti,ts3a227e";
reg = <0x3b>;
interrupt-parent = <&gpio0>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ts3a227e_int_l>;
ti,micbias = <7>; /* MICBIAS = 2.8V */

8
arch/arm/boot/dts/rk3288-veyron-brain.dts
View File

@ -67,7 +67,7 @@ vcc33_io: vcc33_io {
vcc5_host2: vcc5-host2-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb2_pwr_en>;
regulator-name = "vcc5_host2";
@ -103,8 +103,8 @@ usb2_pwr_en: usb2-pwr-en {
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
<&gpio7 15 GPIO_ACTIVE_HIGH>;
dvs-gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>,
<&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
/delete-property/ vcc6-supply;
@ -133,7 +133,7 @@ vcc18_hdmi: SWITCH_REG2 {
&vcc50_hdmi {
enable-active-high;
gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};

14
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
View File

@ -91,7 +91,7 @@ backlight: backlight {
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <128>;
enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
backlight-boot-off;
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
@ -102,7 +102,7 @@ backlight: backlight {
gpio-charger {
compatible = "gpio-charger";
charger-type = "mains";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&ac_present_ap>;
};
@ -142,7 +142,7 @@ vcc_5v: vcc-5v {
vcc5_host1: vcc5-host1-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host1_pwr_en>;
regulator-name = "vcc5_host1";
@ -154,7 +154,7 @@ vcc5_host1: vcc5-host1-regulator {
vcc5v_otg: vcc5v-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usbotg_pwren_h>;
regulator-name = "vcc5_host2";
@ -190,7 +190,7 @@ &gpio_keys {
pinctrl-0 = <&pwr_key_l &ap_lid_int_l>;
lid {
label = "Lid";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
wakeup-source;
linux,code = <0>; /* SW_LID */
linux,input-type = <5>; /* EV_SW */
@ -228,7 +228,7 @@ cros_ec: ec@0 {
reg = <0>;
google,cros-ec-spi-pre-delay = <30>;
interrupt-parent = <&gpio7>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ec_int>;
spi-max-frequency = <3000000>;
@ -247,7 +247,7 @@ trackpad@15 {
compatible = "elan,ekth3000";
reg = <0x15>;
interrupt-parent = <&gpio7>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&trackpad_int>;
vcc-supply = <&vcc33_io>;

14
arch/arm/boot/dts/rk3288-veyron-jaq.dts
View File

@ -57,7 +57,7 @@ / {
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
@ -68,7 +68,7 @@ panel_regulator: panel-regulator {
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
@ -80,7 +80,7 @@ vcc18_lcd: vcc18-lcd {
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
@ -134,8 +134,8 @@ &panel {
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
<&gpio7 15 GPIO_ACTIVE_HIGH>;
dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
<&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
regulators {
mic_vcc: LDO_REG2 {
@ -160,14 +160,14 @@ &sdmmc {
&vcc_5v {
enable-active-high;
gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};

12
arch/arm/boot/dts/rk3288-veyron-jerry.dts
View File

@ -56,7 +56,7 @@ / {
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
@ -67,7 +67,7 @@ panel_regulator: panel-regulator {
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
@ -79,7 +79,7 @@ vcc18_lcd: vcc18-lcd {
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
@ -123,14 +123,14 @@ &sdmmc {
&vcc_5v {
enable-active-high;
gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
@ -197,7 +197,7 @@ trackpad@15 {
trackpad@2c {
compatible = "hid-over-i2c";
interrupt-parent = <&gpio7>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>;
reg = <0x2c>;
hid-descr-addr = <0x0020>;
vcc-supply = <&vcc33_io>;

6
arch/arm/boot/dts/rk3288-veyron-mickey.dts
View File

@ -182,8 +182,8 @@ &i2s {
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
<&gpio7 15 GPIO_ACTIVE_HIGH>;
dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
<&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
/delete-property/ vcc6-supply;
/delete-property/ vcc12-supply;
@ -244,7 +244,7 @@ &usb_host1 {
&vcc50_hdmi {
enable-active-high;
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&power_hdmi_on>;
};

18
arch/arm/boot/dts/rk3288-veyron-minnie.dts
View File

@ -55,7 +55,7 @@ / {
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
@ -66,7 +66,7 @@ backlight_regulator: backlight-regulator {
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
@ -77,7 +77,7 @@ panel_regulator: panel-regulator {
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
@ -134,14 +134,14 @@ &gpio_keys {
volum_down {
label = "Volum_down";
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <100>;
};
volum_up {
label = "Volum_up";
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <100>;
};
@ -165,10 +165,10 @@ touchscreen@10 {
compatible = "elan,ekth3500";
reg = <0x10>;
interrupt-parent = <&gpio2>;
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
interrupts = <RK_PB6 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&touch_int &touch_rst>;
reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
vcc33-supply = <&vcc33_touch>;
vccio-supply = <&vcc33_touch>;
};
@ -211,14 +211,14 @@ &sdmmc {
&vcc_5v {
enable-active-high;
gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};

4
arch/arm/boot/dts/rk3288-veyron-pinky.dts
View File

@ -76,7 +76,7 @@ &gpio_keys {
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
power {
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
};
};
@ -126,7 +126,7 @@ &sdmmc {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
&sdmmc_wp_gpio &sdmmc_bus4>;
wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>;
};
&tsadc {

2
arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
View File

@ -115,7 +115,7 @@ &sdmmc {
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>;
rockchip,default-sample-phase = <90>;
num-slots = <1>;
sd-uhs-sdr12;

10
arch/arm/boot/dts/rk3288-veyron-speedy.dts
View File

@ -57,7 +57,7 @@ / {
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
@ -68,7 +68,7 @@ panel_regulator: panel-regulator {
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
@ -80,7 +80,7 @@ vcc18_lcd: vcc18-lcd {
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
@ -126,14 +126,14 @@ &sdmmc {
&vcc_5v {
enable-active-high;
gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};

10
arch/arm/boot/dts/rk3288-veyron.dtsi
View File

@ -61,7 +61,7 @@ gpio_keys: gpio-keys {
pinctrl-0 = <&pwr_key_l>;
power {
label = "Power";
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
debounce-interval = <100>;
wakeup-source;
@ -70,7 +70,7 @@ power {
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&ap_warm_reset_h>;
priority = <200>;
@ -80,7 +80,7 @@ emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
};
sdio_pwrseq: sdio-pwrseq {
@ -96,7 +96,7 @@ sdio_pwrseq: sdio-pwrseq {
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
*/
reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
};
vcc_5v: vcc-5v {
@ -178,7 +178,7 @@ rk808: pmic@1b {
reg = <0x1b>;
clock-output-names = "xin32k", "wifibt_32kin";
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;

84
arch/arm/boot/dts/rk3288.dtsi
View File

@ -762,6 +762,15 @@ pd_vio@RK3288_PD_VIO {
<&cru SCLK_ISP_JPE>,
<&cru SCLK_ISP>,
<&cru SCLK_RGA>;
pm_qos = <&qos_vio0_iep>,
<&qos_vio1_vop>,
<&qos_vio1_isp_w0>,
<&qos_vio1_isp_w1>,
<&qos_vio0_vop>,
<&qos_vio0_vip>,
<&qos_vio2_rga_r>,
<&qos_vio2_rga_w>,
<&qos_vio1_isp_r>;
};
/*
@ -773,6 +782,8 @@ pd_hevc@RK3288_PD_HEVC {
clocks = <&cru ACLK_HEVC>,
<&cru SCLK_HEVC_CABAC>,
<&cru SCLK_HEVC_CORE>;
pm_qos = <&qos_hevc_r>,
<&qos_hevc_w>;
};
/*
@ -784,6 +795,7 @@ pd_video@RK3288_PD_VIDEO {
reg = <RK3288_PD_VIDEO>;
clocks = <&cru ACLK_VCODEC>,
<&cru HCLK_VCODEC>;
pm_qos = <&qos_video>;
};
/*
@ -793,6 +805,8 @@ pd_video@RK3288_PD_VIDEO {
pd_gpu@RK3288_PD_GPU {
reg = <RK3288_PD_GPU>;
clocks = <&cru ACLK_GPU>;
pm_qos = <&qos_gpu_r>,
<&qos_gpu_w>;
};
};
@ -1103,6 +1117,76 @@ hdmi_in_vopl: endpoint@1 {
};
};
qos_gpu_r: qos@ffaa0000 {
compatible = "syscon";
reg = <0xffaa0000 0x20>;
};
qos_gpu_w: qos@ffaa0080 {
compatible = "syscon";
reg = <0xffaa0080 0x20>;
};
qos_vio1_vop: qos@ffad0000 {
compatible = "syscon";
reg = <0xffad0000 0x20>;
};
qos_vio1_isp_w0: qos@ffad0100 {
compatible = "syscon";
reg = <0xffad0100 0x20>;
};
qos_vio1_isp_w1: qos@ffad0180 {
compatible = "syscon";
reg = <0xffad0180 0x20>;
};
qos_vio0_vop: qos@ffad0400 {
compatible = "syscon";
reg = <0xffad0400 0x20>;
};
qos_vio0_vip: qos@ffad0480 {
compatible = "syscon";
reg = <0xffad0480 0x20>;
};
qos_vio0_iep: qos@ffad0500 {
compatible = "syscon";
reg = <0xffad0500 0x20>;
};
qos_vio2_rga_r: qos@ffad0800 {
compatible = "syscon";
reg = <0xffad0800 0x20>;
};
qos_vio2_rga_w: qos@ffad0880 {
compatible = "syscon";
reg = <0xffad0880 0x20>;
};
qos_vio1_isp_r: qos@ffad0900 {
compatible = "syscon";
reg = <0xffad0900 0x20>;
};
qos_video: qos@ffae0000 {
compatible = "syscon";
reg = <0xffae0000 0x20>;
};
qos_hevc_r: qos@ffaf0000 {
compatible = "syscon";
reg = <0xffaf0000 0x20>;
};
qos_hevc_w: qos@ffaf0080 {
compatible = "syscon";
reg = <0xffaf0080 0x20>;
};
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
interrupt-controller;