AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-30 00:26:42 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity

tty: serial: imx.c: Reset UART before activating interrupts

Browse Source 
If the UART has been in use before this driver was loaded, IRQs might be
active and get fired as soon as we set the handler, which will crash
in the spin_lock_irqsave(&sport->port.lock, flags) because port.lock is
not initialized until the port is added at the end of probe.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
David Jander 2015-07-02 16:29:49 +02:00 committed by Greg Kroah-Hartman
parent e9b5a9825f
commit e95044ba4f
1 changed files with 23 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
drivers/tty/serial/imx.c
View File

@ -1098,10 +1098,23 @@ static void imx_disable_dma(struct imx_port *sport)
/* half the RX buffer size */ /* half the RX buffer size */
#define CTSTL 16 #define CTSTL 16
static inline void imx_reset(struct imx_port *sport)
{
int i = 100;
unsigned long temp;
temp = readl(sport->port.membase + UCR2);
temp &= ~UCR2_SRST;
writel(temp, sport->port.membase + UCR2);
while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
udelay(1);
}
static int imx_startup(struct uart_port *port) static int imx_startup(struct uart_port *port)
{ {
struct imx_port *sport = (struct imx_port *)port; struct imx_port *sport = (struct imx_port *)port;
int retval, i; int retval;
unsigned long flags, temp; unsigned long flags, temp;
retval = clk_prepare_enable(sport->clk_per); retval = clk_prepare_enable(sport->clk_per);
@ -1133,14 +1146,7 @@ static int imx_startup(struct uart_port *port)
spin_lock_irqsave(&sport->port.lock, flags); spin_lock_irqsave(&sport->port.lock, flags);
/* Reset fifo's and state machines */ /* Reset fifo's and state machines */
i = 100; imx_reset(sport);
temp = readl(sport->port.membase + UCR2);
temp &= ~UCR2_SRST;
writel(temp, sport->port.membase + UCR2);
while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
udelay(1);
/* /*
* Finally, clear and enable interrupts * Finally, clear and enable interrupts
@ -1975,6 +1981,14 @@ static int serial_imx_probe(struct platform_device *pdev)
clk_disable_unprepare(sport->clk_ipg); clk_disable_unprepare(sport->clk_ipg);
/*
* Perform a complete reset of the UART device. Needed if we don't
* come straight out of reset.
*/
writel(0, sport->port.membase + UCR2);
writel(0, sport->port.membase + UCR1);
imx_reset(sport);
/* /*
* Allocate the IRQ(s) i.MX1 has three interrupts whereas later * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
* chips only have one interrupt. * chips only have one interrupt.