mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 10:20:49 +07:00
arm64/efi: isolate EFI stub from the kernel proper
Since arm64 does not use a builtin decompressor, the EFI stub is built into the kernel proper. So far, this has been working fine, but actually, since the stub is in fact a PE/COFF relocatable binary that is executed at an unknown offset in the 1:1 mapping provided by the UEFI firmware, we should not be seamlessly sharing code with the kernel proper, which is a position dependent executable linked at a high virtual offset. So instead, separate the contents of libstub and its dependencies, by putting them into their own namespace by prefixing all of its symbols with __efistub. This way, we have tight control over what parts of the kernel proper are referenced by the stub. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This commit is contained in:
Ard Biesheuvel
Catalin Marinas
parent
207918461e
commit
e8f3010f73
@ -20,6 +20,14 @@ arm64-obj-y := debug-monitors.o entry.o irq.o fpsimd.o \
|
||||
cpufeature.o alternative.o cacheinfo.o \
|
||||
smp.o smp_spin_table.o topology.o
|
||||
|
||||
stub-obj := efi-stub.o efi-entry.o
|
||||
extra-y := $(stub-obj)
|
||||
stub-obj := $(patsubst %.o,%.stub.o,$(stub-obj))
|
||||
|
||||
OBJCOPYFLAGS := --prefix-symbols=__efistub_
|
||||
$(obj)/%.stub.o: $(obj)/%.o FORCE
|
||||
$(call if_changed,objcopy)
|
||||
|
||||
arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \
|
||||
sys_compat.o entry32.o \
|
||||
../../arm/kernel/opcodes.o
|
||||
@ -32,7 +40,7 @@ arm64-obj-$(CONFIG_CPU_PM) += sleep.o suspend.o
|
||||
arm64-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
|
||||
arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o
|
||||
arm64-obj-$(CONFIG_KGDB) += kgdb.o
|
||||
arm64-obj-$(CONFIG_EFI) += efi.o efi-stub.o efi-entry.o
|
||||
arm64-obj-$(CONFIG_EFI) += efi.o $(stub-obj)
|
||||
arm64-obj-$(CONFIG_PCI) += pci.o
|
||||
arm64-obj-$(CONFIG_ARMV8_DEPRECATED) += armv8_deprecated.o
|
||||
arm64-obj-$(CONFIG_ACPI) += acpi.o
|
||||
@ -40,7 +48,7 @@ arm64-obj-$(CONFIG_ACPI) += acpi.o
|
||||
obj-y += $(arm64-obj-y) vdso/
|
||||
obj-m += $(arm64-obj-m)
|
||||
head-y := head.o
|
||||
extra-y := $(head-y) vmlinux.lds
|
||||
extra-y += $(head-y) vmlinux.lds
|
||||
|
||||
# vDSO - this must be built first to generate the symbol offsets
|
||||
$(call objectify,$(arm64-obj-y)): $(obj)/vdso/vdso-offsets.h
|
||||
|
||||
@ -29,7 +29,7 @@
|
||||
* we want to be. The kernel image wants to be placed at TEXT_OFFSET
|
||||
* from start of RAM.
|
||||
*/
|
||||
ENTRY(efi_stub_entry)
|
||||
ENTRY(entry)
|
||||
/*
|
||||
* Create a stack frame to save FP/LR with extra space
|
||||
* for image_addr variable passed to efi_entry().
|
||||
@ -86,8 +86,8 @@ ENTRY(efi_stub_entry)
|
||||
* entries for the VA range of the current image, so no maintenance is
|
||||
* necessary.
|
||||
*/
|
||||
adr x0, efi_stub_entry
|
||||
adr x1, efi_stub_entry_end
|
||||
adr x0, entry
|
||||
adr x1, entry_end
|
||||
sub x1, x1, x0
|
||||
bl __flush_dcache_area
|
||||
|
||||
@ -120,5 +120,5 @@ efi_load_fail:
|
||||
ldp x29, x30, [sp], #32
|
||||
ret
|
||||
|
||||
efi_stub_entry_end:
|
||||
ENDPROC(efi_stub_entry)
|
||||
entry_end:
|
||||
ENDPROC(entry)
|
||||
|
||||
@ -120,8 +120,8 @@ efi_head:
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_EFI
|
||||
.globl stext_offset
|
||||
.set stext_offset, stext - efi_head
|
||||
.globl __efistub_stext_offset
|
||||
.set __efistub_stext_offset, stext - efi_head
|
||||
.align 3
|
||||
pe_header:
|
||||
.ascii "PE"
|
||||
@ -144,8 +144,8 @@ optional_header:
|
||||
.long _end - stext // SizeOfCode
|
||||
.long 0 // SizeOfInitializedData
|
||||
.long 0 // SizeOfUninitializedData
|
||||
.long efi_stub_entry - efi_head // AddressOfEntryPoint
|
||||
.long stext_offset // BaseOfCode
|
||||
.long __efistub_entry - efi_head // AddressOfEntryPoint
|
||||
.long __efistub_stext_offset // BaseOfCode
|
||||
|
||||
extra_header_fields:
|
||||
.quad 0 // ImageBase
|
||||
@ -162,7 +162,7 @@ extra_header_fields:
|
||||
.long _end - efi_head // SizeOfImage
|
||||
|
||||
// Everything before the kernel image is considered part of the header
|
||||
.long stext_offset // SizeOfHeaders
|
||||
.long __efistub_stext_offset // SizeOfHeaders
|
||||
.long 0 // CheckSum
|
||||
.short 0xa // Subsystem (EFI application)
|
||||
.short 0 // DllCharacteristics
|
||||
@ -207,9 +207,9 @@ section_table:
|
||||
.byte 0
|
||||
.byte 0 // end of 0 padding of section name
|
||||
.long _end - stext // VirtualSize
|
||||
.long stext_offset // VirtualAddress
|
||||
.long __efistub_stext_offset // VirtualAddress
|
||||
.long _edata - stext // SizeOfRawData
|
||||
.long stext_offset // PointerToRawData
|
||||
.long __efistub_stext_offset // PointerToRawData
|
||||
|
||||
.long 0 // PointerToRelocations (0 for executables)
|
||||
.long 0 // PointerToLineNumbers (0 for executables)
|
||||
|
||||
@ -59,4 +59,31 @@
|
||||
_kernel_offset_le = DATA_LE64(TEXT_OFFSET); \
|
||||
_kernel_flags_le = DATA_LE64(__HEAD_FLAGS);
|
||||
|
||||
#ifdef CONFIG_EFI
|
||||
|
||||
/*
|
||||
* The EFI stub has its own symbol namespace prefixed by __efistub_, to
|
||||
* isolate it from the kernel proper. The following symbols are legally
|
||||
* accessed by the stub, so provide some aliases to make them accessible.
|
||||
* Only include data symbols here, or text symbols of functions that are
|
||||
* guaranteed to be safe when executed at another offset than they were
|
||||
* linked at. The routines below are all implemented in assembler in a
|
||||
* position independent manner
|
||||
*/
|
||||
__efistub_memcmp = __pi_memcmp;
|
||||
__efistub_memchr = __pi_memchr;
|
||||
__efistub_memcpy = __pi_memcpy;
|
||||
__efistub_memmove = __pi_memmove;
|
||||
__efistub_memset = __pi_memset;
|
||||
__efistub_strlen = __pi_strlen;
|
||||
__efistub_strcmp = __pi_strcmp;
|
||||
__efistub_strncmp = __pi_strncmp;
|
||||
__efistub___flush_dcache_area = __pi___flush_dcache_area;
|
||||
|
||||
__efistub__text = _text;
|
||||
__efistub__end = _end;
|
||||
__efistub__edata = _edata;
|
||||
|
||||
#endif
|
||||
|
||||
#endif /* __ASM_IMAGE_H */
|
||||
|
||||
@ -14,6 +14,8 @@ cflags-$(CONFIG_ARM64) := $(subst -pg,,$(KBUILD_CFLAGS))
|
||||
cflags-$(CONFIG_ARM) := $(subst -pg,,$(KBUILD_CFLAGS)) \
|
||||
-fno-builtin -fpic -mno-single-pic-base
|
||||
|
||||
cflags-$(CONFIG_EFI_ARMSTUB) += -I$(srctree)/scripts/dtc/libfdt
|
||||
|
||||
KBUILD_CFLAGS := $(cflags-y) \
|
||||
$(call cc-option,-ffreestanding) \
|
||||
$(call cc-option,-fno-stack-protector)
|
||||
@ -22,7 +24,15 @@ GCOV_PROFILE := n
|
||||
KASAN_SANITIZE := n
|
||||
|
||||
lib-y := efi-stub-helper.o
|
||||
lib-$(CONFIG_EFI_ARMSTUB) += arm-stub.o fdt.o
|
||||
|
||||
# include the stub's generic dependencies from lib/ when building for ARM/arm64
|
||||
arm-deps := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c fdt_empty_tree.c fdt_sw.c sort.c
|
||||
|
||||
$(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
|
||||
$(call if_changed_rule,cc_o_c)
|
||||
|
||||
lib-$(CONFIG_EFI_ARMSTUB) += arm-stub.o fdt.o string.o \
|
||||
$(patsubst %.c,lib-%.o,$(arm-deps))
|
||||
|
||||
#
|
||||
# arm64 puts the stub in the kernel proper, which will unnecessarily retain all
|
||||
@ -30,10 +40,27 @@ lib-$(CONFIG_EFI_ARMSTUB) += arm-stub.o fdt.o
|
||||
# So let's apply the __init annotations at the section level, by prefixing
|
||||
# the section names directly. This will ensure that even all the inline string
|
||||
# literals are covered.
|
||||
# The fact that the stub and the kernel proper are essentially the same binary
|
||||
# also means that we need to be extra careful to make sure that the stub does
|
||||
# not rely on any absolute symbol references, considering that the virtual
|
||||
# kernel mapping that the linker uses is not active yet when the stub is
|
||||
# executing. So build all C dependencies of the EFI stub into libstub, and do
|
||||
# a verification pass to see if any absolute relocations exist in any of the
|
||||
# object files.
|
||||
#
|
||||
extra-$(CONFIG_ARM64) := $(lib-y)
|
||||
lib-$(CONFIG_ARM64) := $(patsubst %.o,%.init.o,$(lib-y))
|
||||
extra-$(CONFIG_EFI_ARMSTUB) := $(lib-y)
|
||||
lib-$(CONFIG_EFI_ARMSTUB) := $(patsubst %.o,%.stub.o,$(lib-y))
|
||||
|
||||
OBJCOPYFLAGS := --prefix-alloc-sections=.init
|
||||
$(obj)/%.init.o: $(obj)/%.o FORCE
|
||||
$(call if_changed,objcopy)
|
||||
STUBCOPY_FLAGS-y := -R .debug* -R *ksymtab*
|
||||
STUBCOPY_FLAGS-$(CONFIG_ARM64) += --prefix-alloc-sections=.init \
|
||||
--prefix-symbols=__efistub_
|
||||
STUBCOPY_RELOC-$(CONFIG_ARM64) := R_AARCH64_ABS
|
||||
|
||||
$(obj)/%.stub.o: $(obj)/%.o FORCE
|
||||
$(call if_changed,stubcopy)
|
||||
|
||||
quiet_cmd_stubcopy = STUBCPY $@
|
||||
cmd_stubcopy = if $(OBJCOPY) $(STUBCOPY_FLAGS-y) $< $@; then \
|
||||
$(OBJDUMP) -r $@ | grep $(STUBCOPY_RELOC-y) \
|
||||
&& (echo >&2 "$@: absolute symbol references not allowed in the EFI stub"; \
|
||||
rm -f $@; /bin/false); else /bin/false; fi
|
||||
|
||||
57
drivers/firmware/efi/libstub/string.c
Normal file
57
drivers/firmware/efi/libstub/string.c
Normal file
@ -0,0 +1,57 @@
|
||||
/*
|
||||
* Taken from:
|
||||
* linux/lib/string.c
|
||||
*
|
||||
* Copyright (C) 1991, 1992 Linus Torvalds
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/string.h>
|
||||
|
||||
#ifndef __HAVE_ARCH_STRSTR
|
||||
/**
|
||||
* strstr - Find the first substring in a %NUL terminated string
|
||||
* @s1: The string to be searched
|
||||
* @s2: The string to search for
|
||||
*/
|
||||
char *strstr(const char *s1, const char *s2)
|
||||
{
|
||||
size_t l1, l2;
|
||||
|
||||
l2 = strlen(s2);
|
||||
if (!l2)
|
||||
return (char *)s1;
|
||||
l1 = strlen(s1);
|
||||
while (l1 >= l2) {
|
||||
l1--;
|
||||
if (!memcmp(s1, s2, l2))
|
||||
return (char *)s1;
|
||||
s1++;
|
||||
}
|
||||
return NULL;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifndef __HAVE_ARCH_STRNCMP
|
||||
/**
|
||||
* strncmp - Compare two length-limited strings
|
||||
* @cs: One string
|
||||
* @ct: Another string
|
||||
* @count: The maximum number of bytes to compare
|
||||
*/
|
||||
int strncmp(const char *cs, const char *ct, size_t count)
|
||||
{
|
||||
unsigned char c1, c2;
|
||||
|
||||
while (count) {
|
||||
c1 = *cs++;
|
||||
c2 = *ct++;
|
||||
if (c1 != c2)
|
||||
return c1 < c2 ? -1 : 1;
|
||||
if (!c1)
|
||||
break;
|
||||
count--;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user