diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 8dbc259081e4..7f40cb5f490b 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -109,6 +109,7 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,s400" (Meson axg a113d) - "amlogic,u200" (Meson g12a s905d2) + - "amediatech,x96-max" (Meson g12a s905x2) Amlogic Meson Firmware registers Interface ------------------------------------------ diff --git a/Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt b/Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt new file mode 100644 index 000000000000..aaa6c24c8e70 --- /dev/null +++ b/Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt @@ -0,0 +1,33 @@ +Meson specific Simple Framebuffer bindings + +This binding documents meson specific extensions to the simple-framebuffer +bindings. The meson simplefb u-boot code relies on the devicetree containing +pre-populated simplefb nodes. + +These extensions are intended so that u-boot can select the right node based +on which pipeline is being used. As such they are solely intended for +firmware / bootloader use, and the OS should ignore them. + +Required properties: +- compatible: "amlogic,simple-framebuffer", "simple-framebuffer" +- amlogic,pipeline, one of: + "vpu-cvbs" + "vpu-hdmi" + +Example: + +chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + power-domains = <&pwrc_vpu>; + }; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index b91870a1aedf..a81c08b715e5 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -24,6 +24,7 @@ amarula Amarula Solutions amazon Amazon.com, Inc. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amd Advanced Micro Devices (AMD), Inc. +amediatech Shenzhen Amediatech Technology Co., Ltd amlogic Amlogic, Inc. ampire Ampire Co., Ltd. ams AMS AG diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index f12efa27c636..0821fed4c074 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 824eba98db2c..75fe1a2c49d0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -95,6 +95,13 @@ dmics: audio-codec-3 { sound-name-prefix = "MIC"; }; + spdif_dir: audio-codec-4 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + status = "okay"; + sound-name-prefix = "DIR"; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; @@ -249,6 +256,9 @@ sound { "TODDR_A IN 2", "TDMIN_C OUT", "TODDR_B IN 2", "TDMIN_C OUT", "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 3", "SPDIFIN Capture", + "TODDR_B IN 3", "SPDIFIN Capture", + "TODDR_C IN 3", "SPDIFIN Capture", "TODDR_A IN 4", "PDM Capture", "TODDR_B IN 4", "PDM Capture", "TODDR_C IN 4", "PDM Capture", @@ -326,6 +336,14 @@ codec { }; dai-link-8 { + sound-dai = <&spdifin>; + + codec { + sound-dai = <&spdif_dir>; + }; + }; + + dai-link-9 { sound-dai = <&pdm>; codec { @@ -446,7 +464,8 @@ &sd_emmc_b { bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + sd-uhs-sdr104; + max-frequency = <200000000>; non-removable; disable-wp; @@ -469,9 +488,8 @@ &sd_emmc_c { pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <180000000>; + max-frequency = <200000000>; non-removable; disable-wp; mmc-ddr-1_8v; @@ -483,6 +501,12 @@ &sd_emmc_c { vqmmc-supply = <&vddio_boot>; }; +&spdifin { + pinctrl-0 = <&spdif_in_a19_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &spdifout { pinctrl-0 = <&spdif_out_a20_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 1b69efabd49a..34704fecf756 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -111,6 +111,14 @@ sm: secure-monitor { compatible = "amlogic,meson-gxbb-sm"; }; + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc CLKID_EFUSE>; + #address-cells = <1>; + #size-cells = <1>; + read-only; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -1260,6 +1268,18 @@ tdmin_lb: audio-controller@3c0 { status = "disabled"; }; + spdifin: audio-controller@400 { + compatible = "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + status = "disabled"; + }; + spdifout: audio-controller@480 { compatible = "amlogic,axg-spdifout"; reg = <0x0 0x480 0x0 0x50>; @@ -1590,6 +1610,11 @@ spicc1: spi@15000 { status = "disabled"; }; + clk_msr: clock-measure@18000 { + compatible = "amlogic,meson-axg-clk-measure"; + reg = <0x0 0x18000 0x0 0x10>; + }; + i2c3: i2c@1c000 { compatible = "amlogic,meson-axg-i2c"; reg = <0x0 0x1c000 0x0 0x20>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts new file mode 100644 index 000000000000..c62d3d5706ff --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 BayLibre SAS. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" + +/ { + compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a"; + model = "Shenzhen Amediatech Technology Co., Ltd X96 Max"; + + aliases { + serial0 = &uart_AO; + }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 10418e4b048a..17c6217f8a84 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -78,20 +78,41 @@ soc { #size-cells = <2>; ranges; - periphs: periphs@ff634000 { + apb: bus@ff600000 { compatible = "simple-bus"; - reg = <0x0 0xff634000 0x0 0x2000>; + reg = <0x0 0xff600000 0x0 0x200000>; #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; - }; + ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; - hiubus: bus@ff63c000 { - compatible = "simple-bus"; - reg = <0x0 0xff63c000 0x0 0x1c00>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; + periphs: bus@34400 { + compatible = "simple-bus"; + reg = <0x0 0x34400 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; + }; + + hiu: bus@3c000 { + compatible = "simple-bus"; + reg = <0x0 0x3c000 0x0 0x1400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; + + hhi: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", + "simple-mfd", "syscon"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + compatible = "amlogic,g12a-clkc"; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; + }; + }; + }; }; aobus: bus@ff800000 { @@ -102,7 +123,8 @@ aobus: bus@ff800000 { ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; uart_AO: serial@3000 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = ; clocks = <&xtal>, <&xtal>, <&xtal>; @@ -111,7 +133,8 @@ uart_AO: serial@3000 { }; uart_AO_B: serial@4000 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = ; clocks = <&xtal>, <&xtal>, <&xtal>; @@ -135,18 +158,15 @@ gic: interrupt-controller@ffc01000 { cbus: bus@ffd00000 { compatible = "simple-bus"; - reg = <0x0 0xffd00000 0x0 0x25000>; + reg = <0x0 0xffd00000 0x0 0x100000>; #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; - }; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; - apb: apb@ffe00000 { - compatible = "simple-bus"; - reg = <0x0 0xffe00000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; + clk_msr: clock-measure@18000 { + compatible = "amlogic,meson-g12a-clk-measure"; + reg = <0x0 0x18000 0x0 0x10>; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 3b63ead4f4ed..6772709b9e19 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -50,6 +50,28 @@ linux,cma { }; }; + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + simplefb_cvbs: framebuffer-cvbs { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-cvbs"; + power-domains = <&pwrc_vpu>; + status = "disabled"; + }; + + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + power-domains = <&pwrc_vpu>; + status = "disabled"; + }; + }; + cpus { #address-cells = <0x2>; #size-cells = <0x0>; @@ -510,6 +532,7 @@ vpu: vpu@d0100000 { interrupts = ; #address-cells = <1>; #size-cells = <0>; + amlogic,canvas = <&canvas>; /* CVBS VDAC output port */ cvbs_vdac_port: port@0 { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index a7b883ced0a8..a60d3652beee 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -784,6 +784,12 @@ &sd_emmc_c { resets = <&reset RESET_SD_EMMC_C>; }; +&simplefb_hdmi { + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; +}; + &spicc { clocks = <&clkc CLKID_SPICC>; clock-names = "core"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index d5c3d78aafeb..3093ae421b17 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -787,6 +787,12 @@ &sd_emmc_c { resets = <&reset RESET_SD_EMMC_C>; }; +&simplefb_hdmi { + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; +}; + &spicc { clocks = <&clkc CLKID_SPICC>; clock-names = "core";