mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-18 11:06:43 +07:00
Merge branch 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo: "The biggest core change is removal of SCT WRITE SAME support, which never worked properly. Other than that, trivial updates in core code and specific embedded driver updates" * 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: remove SCT WRITE SAME support libata: reject passthrough WRITE SAME requests dt-bindings: ata: add DT bindings for ahci-dm816 SATA controller ata: ahci: add support for DaVinci DM816 SATA controller pata: remove the at91 driver libata: make ata_sg_clean static over again libata: use setup_deferrable_timer ata: allow subsystem to be used on m32r and s390 archs Delete redundant return value check of platform_get_resource() ata: constify of_device_id structures
This commit is contained in:
Linus Torvalds
commit
e69bbe75de
21
Documentation/devicetree/bindings/ata/ahci-dm816.txt
Normal file
21
Documentation/devicetree/bindings/ata/ahci-dm816.txt
Normal file
@ -0,0 +1,21 @@
|
||||
Device tree binding for the TI DM816 AHCI SATA Controller
|
||||
---------------------------------------------------------
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "ti,dm816-ahci"
|
||||
- reg: physical base address and size of the register region used by
|
||||
the controller (as defined by the AHCI 1.1 standard)
|
||||
- interrupts: interrupt specifier (refer to the interrupt binding)
|
||||
- clocks: list of phandle and clock specifier pairs (or only
|
||||
phandles for clock providers with '0' defined for
|
||||
#clock-cells); two clocks must be specified: the functional
|
||||
clock and an external reference clock
|
||||
|
||||
Example:
|
||||
|
||||
sata: sata@4a140000 {
|
||||
compatible = "ti,dm816-ahci";
|
||||
reg = <0x4a140000 0x10000>;
|
||||
interrupts = <16>;
|
||||
clocks = <&sysclk5_ck>, <&sata_refclk>;
|
||||
};
|
||||
@ -14,7 +14,6 @@ menuconfig ATA
|
||||
tristate "Serial ATA and Parallel ATA drivers (libata)"
|
||||
depends on HAS_IOMEM
|
||||
depends on BLOCK
|
||||
depends on !(M32R || S390) || BROKEN
|
||||
select SCSI
|
||||
select GLOB
|
||||
---help---
|
||||
@ -118,6 +117,15 @@ config AHCI_DA850
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
config AHCI_DM816
|
||||
tristate "DaVinci DM816 AHCI SATA support"
|
||||
depends on ARCH_OMAP2PLUS
|
||||
help
|
||||
This option enables support for the DaVinci DM816 SoC's
|
||||
onboard AHCI SATA controller.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
config AHCI_ST
|
||||
tristate "ST AHCI SATA support"
|
||||
depends on ARCH_STI
|
||||
@ -885,14 +893,6 @@ config PATA_AT32
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
config PATA_AT91
|
||||
tristate "PATA support for AT91SAM9260"
|
||||
depends on ARM && SOC_AT91SAM9
|
||||
help
|
||||
This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
config PATA_CMD640_PCI
|
||||
tristate "CMD640 PCI PATA support (Experimental)"
|
||||
depends on PCI
|
||||
|
||||
@ -14,6 +14,7 @@ obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
|
||||
obj-$(CONFIG_AHCI_BRCM) += ahci_brcm.o libahci.o libahci_platform.o
|
||||
obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o
|
||||
obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o
|
||||
obj-$(CONFIG_AHCI_DM816) += ahci_dm816.o libahci.o libahci_platform.o
|
||||
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
|
||||
obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o
|
||||
obj-$(CONFIG_AHCI_OCTEON) += ahci_octeon.o
|
||||
@ -91,7 +92,6 @@ obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o
|
||||
|
||||
# SFF PIO only
|
||||
obj-$(CONFIG_PATA_AT32) += pata_at32.o
|
||||
obj-$(CONFIG_PATA_AT91) += pata_at91.o
|
||||
obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
|
||||
obj-$(CONFIG_PATA_FALCON) += pata_falcon.o
|
||||
obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
|
||||
|
||||
200
drivers/ata/ahci_dm816.c
Normal file
200
drivers/ata/ahci_dm816.c
Normal file
@ -0,0 +1,200 @@
|
||||
/*
|
||||
* DaVinci DM816 AHCI SATA platform driver
|
||||
*
|
||||
* Copyright (C) 2017 BayLibre SAS
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2, or (at your option)
|
||||
* any later version.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/pm.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/libata.h>
|
||||
#include <linux/ahci_platform.h>
|
||||
|
||||
#include "ahci.h"
|
||||
|
||||
#define AHCI_DM816_DRV_NAME "ahci-dm816"
|
||||
|
||||
#define AHCI_DM816_PHY_ENPLL(x) ((x) << 0)
|
||||
#define AHCI_DM816_PHY_MPY(x) ((x) << 1)
|
||||
#define AHCI_DM816_PHY_LOS(x) ((x) << 12)
|
||||
#define AHCI_DM816_PHY_RXCDR(x) ((x) << 13)
|
||||
#define AHCI_DM816_PHY_RXEQ(x) ((x) << 16)
|
||||
#define AHCI_DM816_PHY_TXSWING(x) ((x) << 23)
|
||||
|
||||
#define AHCI_DM816_P0PHYCR_REG 0x178
|
||||
#define AHCI_DM816_P1PHYCR_REG 0x1f8
|
||||
|
||||
#define AHCI_DM816_PLL_OUT 1500000000LU
|
||||
|
||||
static const unsigned long pll_mpy_table[] = {
|
||||
400, 500, 600, 800, 825, 1000, 1200,
|
||||
1250, 1500, 1600, 1650, 2000, 2200, 2500
|
||||
};
|
||||
|
||||
static int ahci_dm816_get_mpy_bits(unsigned long refclk_rate)
|
||||
{
|
||||
unsigned long pll_multiplier;
|
||||
int i;
|
||||
|
||||
/*
|
||||
* We need to determine the value of the multiplier (MPY) bits.
|
||||
* In order to include the 8.25 multiplier we need to first divide
|
||||
* the refclk rate by 100.
|
||||
*/
|
||||
pll_multiplier = AHCI_DM816_PLL_OUT / (refclk_rate / 100);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(pll_mpy_table); i++) {
|
||||
if (pll_mpy_table[i] == pll_multiplier)
|
||||
return i;
|
||||
}
|
||||
|
||||
/*
|
||||
* We should have divided evenly - if not, return an invalid
|
||||
* value.
|
||||
*/
|
||||
return -1;
|
||||
}
|
||||
|
||||
static int ahci_dm816_phy_init(struct ahci_host_priv *hpriv, struct device *dev)
|
||||
{
|
||||
unsigned long refclk_rate;
|
||||
int mpy;
|
||||
u32 val;
|
||||
|
||||
/*
|
||||
* We should have been supplied two clocks: the functional and
|
||||
* keep-alive clock and the external reference clock. We need the
|
||||
* rate of the latter to calculate the correct value of MPY bits.
|
||||
*/
|
||||
if (!hpriv->clks[1]) {
|
||||
dev_err(dev, "reference clock not supplied\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
refclk_rate = clk_get_rate(hpriv->clks[1]);
|
||||
if ((refclk_rate % 100) != 0) {
|
||||
dev_err(dev, "reference clock rate must be divisible by 100\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
mpy = ahci_dm816_get_mpy_bits(refclk_rate);
|
||||
if (mpy < 0) {
|
||||
dev_err(dev, "can't calculate the MPY bits value\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Enable the PHY and configure the first HBA port. */
|
||||
val = AHCI_DM816_PHY_MPY(mpy) | AHCI_DM816_PHY_LOS(1) |
|
||||
AHCI_DM816_PHY_RXCDR(4) | AHCI_DM816_PHY_RXEQ(1) |
|
||||
AHCI_DM816_PHY_TXSWING(3) | AHCI_DM816_PHY_ENPLL(1);
|
||||
writel(val, hpriv->mmio + AHCI_DM816_P0PHYCR_REG);
|
||||
|
||||
/* Configure the second HBA port. */
|
||||
val = AHCI_DM816_PHY_LOS(1) | AHCI_DM816_PHY_RXCDR(4) |
|
||||
AHCI_DM816_PHY_RXEQ(1) | AHCI_DM816_PHY_TXSWING(3);
|
||||
writel(val, hpriv->mmio + AHCI_DM816_P1PHYCR_REG);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ahci_dm816_softreset(struct ata_link *link,
|
||||
unsigned int *class, unsigned long deadline)
|
||||
{
|
||||
int pmp, ret;
|
||||
|
||||
pmp = sata_srst_pmp(link);
|
||||
|
||||
/*
|
||||
* There's an issue with the SATA controller on DM816 SoC: if we
|
||||
* enable Port Multiplier support, but the drive is connected directly
|
||||
* to the board, it can't be detected. As a workaround: if PMP is
|
||||
* enabled, we first call ahci_do_softreset() and pass it the result of
|
||||
* sata_srst_pmp(). If this call fails, we retry with pmp = 0.
|
||||
*/
|
||||
ret = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
|
||||
if (pmp && ret == -EBUSY)
|
||||
return ahci_do_softreset(link, class, 0,
|
||||
deadline, ahci_check_ready);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct ata_port_operations ahci_dm816_port_ops = {
|
||||
.inherits = &ahci_platform_ops,
|
||||
.softreset = ahci_dm816_softreset,
|
||||
};
|
||||
|
||||
static const struct ata_port_info ahci_dm816_port_info = {
|
||||
.flags = AHCI_FLAG_COMMON,
|
||||
.pio_mask = ATA_PIO4,
|
||||
.udma_mask = ATA_UDMA6,
|
||||
.port_ops = &ahci_dm816_port_ops,
|
||||
};
|
||||
|
||||
static struct scsi_host_template ahci_dm816_platform_sht = {
|
||||
AHCI_SHT(AHCI_DM816_DRV_NAME),
|
||||
};
|
||||
|
||||
static int ahci_dm816_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct ahci_host_priv *hpriv;
|
||||
int rc;
|
||||
|
||||
hpriv = ahci_platform_get_resources(pdev);
|
||||
if (IS_ERR(hpriv))
|
||||
return PTR_ERR(hpriv);
|
||||
|
||||
rc = ahci_platform_enable_resources(hpriv);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
rc = ahci_dm816_phy_init(hpriv, dev);
|
||||
if (rc)
|
||||
goto disable_resources;
|
||||
|
||||
rc = ahci_platform_init_host(pdev, hpriv,
|
||||
&ahci_dm816_port_info,
|
||||
&ahci_dm816_platform_sht);
|
||||
if (rc)
|
||||
goto disable_resources;
|
||||
|
||||
return 0;
|
||||
|
||||
disable_resources:
|
||||
ahci_platform_disable_resources(hpriv);
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(ahci_dm816_pm_ops,
|
||||
ahci_platform_suspend,
|
||||
ahci_platform_resume);
|
||||
|
||||
static const struct of_device_id ahci_dm816_of_match[] = {
|
||||
{ .compatible = "ti,dm816-ahci", },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ahci_dm816_of_match);
|
||||
|
||||
static struct platform_driver ahci_dm816_driver = {
|
||||
.probe = ahci_dm816_probe,
|
||||
.remove = ata_platform_remove_one,
|
||||
.driver = {
|
||||
.name = AHCI_DM816_DRV_NAME,
|
||||
.of_match_table = ahci_dm816_of_match,
|
||||
.pm = &ahci_dm816_pm_ops,
|
||||
},
|
||||
};
|
||||
module_platform_driver(ahci_dm816_driver);
|
||||
|
||||
MODULE_DESCRIPTION("DaVinci DM816 AHCI SATA platform driver");
|
||||
MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
@ -38,11 +38,6 @@ static int ahci_octeon_probe(struct platform_device *pdev)
|
||||
int ret;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!res) {
|
||||
dev_err(&pdev->dev, "Platform resource[0] is missing\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
base = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(base))
|
||||
return PTR_ERR(base);
|
||||
|
||||
@ -4910,7 +4910,7 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
|
||||
* LOCKING:
|
||||
* spin_lock_irqsave(host lock)
|
||||
*/
|
||||
void ata_sg_clean(struct ata_queued_cmd *qc)
|
||||
static void ata_sg_clean(struct ata_queued_cmd *qc)
|
||||
{
|
||||
struct ata_port *ap = qc->ap;
|
||||
struct scatterlist *sg = qc->sg;
|
||||
@ -5902,9 +5902,9 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
|
||||
INIT_LIST_HEAD(&ap->eh_done_q);
|
||||
init_waitqueue_head(&ap->eh_wait_q);
|
||||
init_completion(&ap->park_req_pending);
|
||||
init_timer_deferrable(&ap->fastdrain_timer);
|
||||
ap->fastdrain_timer.function = ata_eh_fastdrain_timerfn;
|
||||
ap->fastdrain_timer.data = (unsigned long)ap;
|
||||
setup_deferrable_timer(&ap->fastdrain_timer,
|
||||
ata_eh_fastdrain_timerfn,
|
||||
(unsigned long)ap);
|
||||
|
||||
ap->cbl = ATA_CBL_NONE;
|
||||
|
||||
|
||||
@ -3392,46 +3392,6 @@ static size_t ata_format_dsm_trim_descr(struct scsi_cmnd *cmd, u32 trmax,
|
||||
return r;
|
||||
}
|
||||
|
||||
/**
|
||||
* ata_format_dsm_trim_descr() - SATL Write Same to ATA SCT Write Same
|
||||
* @cmd: SCSI command being translated
|
||||
* @lba: Starting sector
|
||||
* @num: Number of sectors to be zero'd.
|
||||
*
|
||||
* Rewrite the WRITE SAME payload to be an SCT Write Same formatted
|
||||
* descriptor.
|
||||
* NOTE: Writes a pattern (0's) in the foreground.
|
||||
*
|
||||
* Return: Number of bytes copied into sglist.
|
||||
*/
|
||||
static size_t ata_format_sct_write_same(struct scsi_cmnd *cmd, u64 lba, u64 num)
|
||||
{
|
||||
struct scsi_device *sdp = cmd->device;
|
||||
size_t len = sdp->sector_size;
|
||||
size_t r;
|
||||
u16 *buf;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&ata_scsi_rbuf_lock, flags);
|
||||
buf = ((void *)ata_scsi_rbuf);
|
||||
|
||||
put_unaligned_le16(0x0002, &buf[0]); /* SCT_ACT_WRITE_SAME */
|
||||
put_unaligned_le16(0x0101, &buf[1]); /* WRITE PTRN FG */
|
||||
put_unaligned_le64(lba, &buf[2]);
|
||||
put_unaligned_le64(num, &buf[6]);
|
||||
put_unaligned_le32(0u, &buf[10]); /* pattern */
|
||||
|
||||
WARN_ON(len > ATA_SCSI_RBUF_SIZE);
|
||||
|
||||
if (len > ATA_SCSI_RBUF_SIZE)
|
||||
len = ATA_SCSI_RBUF_SIZE;
|
||||
|
||||
r = sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, len);
|
||||
spin_unlock_irqrestore(&ata_scsi_rbuf_lock, flags);
|
||||
|
||||
return r;
|
||||
}
|
||||
|
||||
/**
|
||||
* ata_scsi_write_same_xlat() - SATL Write Same to ATA SCT Write Same
|
||||
* @qc: Command to be translated
|
||||
@ -3462,32 +3422,31 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
|
||||
if (unlikely(!dev->dma_mode))
|
||||
goto invalid_opcode;
|
||||
|
||||
/*
|
||||
* We only allow sending this command through the block layer,
|
||||
* as it modifies the DATA OUT buffer, which would corrupt user
|
||||
* memory for SG_IO commands.
|
||||
*/
|
||||
if (unlikely(blk_rq_is_passthrough(scmd->request)))
|
||||
goto invalid_opcode;
|
||||
|
||||
if (unlikely(scmd->cmd_len < 16)) {
|
||||
fp = 15;
|
||||
goto invalid_fld;
|
||||
}
|
||||
scsi_16_lba_len(cdb, &block, &n_block);
|
||||
|
||||
if (unmap) {
|
||||
/* If trim is not enabled the cmd is invalid. */
|
||||
if ((dev->horkage & ATA_HORKAGE_NOTRIM) ||
|
||||
!ata_id_has_trim(dev->id)) {
|
||||
fp = 1;
|
||||
bp = 3;
|
||||
goto invalid_fld;
|
||||
}
|
||||
/* If the request is too large the cmd is invalid */
|
||||
if (n_block > 0xffff * trmax) {
|
||||
fp = 2;
|
||||
goto invalid_fld;
|
||||
}
|
||||
} else {
|
||||
/* If write same is not available the cmd is invalid */
|
||||
if (!ata_id_sct_write_same(dev->id)) {
|
||||
fp = 1;
|
||||
bp = 3;
|
||||
goto invalid_fld;
|
||||
}
|
||||
if (!unmap ||
|
||||
(dev->horkage & ATA_HORKAGE_NOTRIM) ||
|
||||
!ata_id_has_trim(dev->id)) {
|
||||
fp = 1;
|
||||
bp = 3;
|
||||
goto invalid_fld;
|
||||
}
|
||||
/* If the request is too large the cmd is invalid */
|
||||
if (n_block > 0xffff * trmax) {
|
||||
fp = 2;
|
||||
goto invalid_fld;
|
||||
}
|
||||
|
||||
/*
|
||||
@ -3502,49 +3461,28 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
|
||||
* For DATA SET MANAGEMENT TRIM in ACS-2 nsect (aka count)
|
||||
* is defined as number of 512 byte blocks to be transferred.
|
||||
*/
|
||||
if (unmap) {
|
||||
size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
|
||||
if (size != len)
|
||||
goto invalid_param_len;
|
||||
|
||||
if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
|
||||
/* Newer devices support queued TRIM commands */
|
||||
tf->protocol = ATA_PROT_NCQ;
|
||||
tf->command = ATA_CMD_FPDMA_SEND;
|
||||
tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f;
|
||||
tf->nsect = qc->tag << 3;
|
||||
tf->hob_feature = (size / 512) >> 8;
|
||||
tf->feature = size / 512;
|
||||
size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
|
||||
if (size != len)
|
||||
goto invalid_param_len;
|
||||
|
||||
tf->auxiliary = 1;
|
||||
} else {
|
||||
tf->protocol = ATA_PROT_DMA;
|
||||
tf->hob_feature = 0;
|
||||
tf->feature = ATA_DSM_TRIM;
|
||||
tf->hob_nsect = (size / 512) >> 8;
|
||||
tf->nsect = size / 512;
|
||||
tf->command = ATA_CMD_DSM;
|
||||
}
|
||||
if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
|
||||
/* Newer devices support queued TRIM commands */
|
||||
tf->protocol = ATA_PROT_NCQ;
|
||||
tf->command = ATA_CMD_FPDMA_SEND;
|
||||
tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f;
|
||||
tf->nsect = qc->tag << 3;
|
||||
tf->hob_feature = (size / 512) >> 8;
|
||||
tf->feature = size / 512;
|
||||
|
||||
tf->auxiliary = 1;
|
||||
} else {
|
||||
size = ata_format_sct_write_same(scmd, block, n_block);
|
||||
if (size != len)
|
||||
goto invalid_param_len;
|
||||
|
||||
tf->hob_feature = 0;
|
||||
tf->feature = 0;
|
||||
tf->hob_nsect = 0;
|
||||
tf->nsect = 1;
|
||||
tf->lbah = 0;
|
||||
tf->lbam = 0;
|
||||
tf->lbal = ATA_CMD_STANDBYNOW1;
|
||||
tf->hob_lbah = 0;
|
||||
tf->hob_lbam = 0;
|
||||
tf->hob_lbal = 0;
|
||||
tf->device = ATA_CMD_STANDBYNOW1;
|
||||
tf->protocol = ATA_PROT_DMA;
|
||||
tf->command = ATA_CMD_WRITE_LOG_DMA_EXT;
|
||||
if (unlikely(dev->flags & ATA_DFLAG_PIO))
|
||||
tf->command = ATA_CMD_WRITE_LOG_EXT;
|
||||
tf->hob_feature = 0;
|
||||
tf->feature = ATA_DSM_TRIM;
|
||||
tf->hob_nsect = (size / 512) >> 8;
|
||||
tf->nsect = size / 512;
|
||||
tf->command = ATA_CMD_DSM;
|
||||
}
|
||||
|
||||
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 |
|
||||
@ -3619,10 +3557,6 @@ static unsigned int ata_scsiop_maint_in(struct ata_scsi_args *args, u8 *rbuf)
|
||||
case START_STOP:
|
||||
supported = 3;
|
||||
break;
|
||||
case WRITE_SAME_16:
|
||||
if (!ata_id_sct_write_same(dev->id))
|
||||
break;
|
||||
/* fallthrough: if SCT ... only enable for ZBC */
|
||||
case ZBC_IN:
|
||||
case ZBC_OUT:
|
||||
if (ata_id_zoned_cap(dev->id) ||
|
||||
|
||||
@ -1,503 +0,0 @@
|
||||
/*
|
||||
* PATA driver for AT91SAM9260 Static Memory Controller
|
||||
* with CompactFlash interface in True IDE mode
|
||||
*
|
||||
* Copyright (C) 2009 Matyukevich Sergey
|
||||
* 2011 Igor Plyatov
|
||||
*
|
||||
* Based on:
|
||||
* * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c
|
||||
* * pata_at32 driver by Kristoffer Nyborg Gregertsen
|
||||
* * at91_ide driver by Stanislaw Gruszka
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2
|
||||
* as published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/blkdev.h>
|
||||
#include <linux/gfp.h>
|
||||
#include <scsi/scsi_host.h>
|
||||
#include <linux/ata.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/libata.h>
|
||||
#include <linux/mfd/syscon.h>
|
||||
#include <linux/mfd/syscon/atmel-smc.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ata_platform.h>
|
||||
#include <linux/platform_data/atmel.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
#define DRV_NAME "pata_at91"
|
||||
#define DRV_VERSION "0.3"
|
||||
|
||||
#define CF_IDE_OFFSET 0x00c00000
|
||||
#define CF_ALT_IDE_OFFSET 0x00e00000
|
||||
#define CF_IDE_RES_SIZE 0x08
|
||||
#define CS_PULSE_MAXIMUM 319
|
||||
#define ER_SMC_CALC 1
|
||||
#define ER_SMC_RECALC 2
|
||||
|
||||
struct at91_ide_info {
|
||||
unsigned long mode;
|
||||
unsigned int cs;
|
||||
struct clk *mck;
|
||||
void __iomem *ide_addr;
|
||||
void __iomem *alt_addr;
|
||||
};
|
||||
|
||||
/**
|
||||
* struct smc_range - range of valid values for SMC register.
|
||||
*/
|
||||
struct smc_range {
|
||||
int min;
|
||||
int max;
|
||||
};
|
||||
|
||||
struct regmap *smc;
|
||||
|
||||
struct at91sam9_smc_generic_fields {
|
||||
struct regmap_field *setup;
|
||||
struct regmap_field *pulse;
|
||||
struct regmap_field *cycle;
|
||||
struct regmap_field *mode;
|
||||
} fields;
|
||||
|
||||
/**
|
||||
* adjust_smc_value - adjust value for one of SMC registers.
|
||||
* @value: adjusted value
|
||||
* @range: array of SMC ranges with valid values
|
||||
* @size: SMC ranges array size
|
||||
*
|
||||
* This returns the difference between input and output value or negative
|
||||
* in case of invalid input value.
|
||||
* If negative returned, then output value = maximal possible from ranges.
|
||||
*/
|
||||
static int adjust_smc_value(int *value, struct smc_range *range, int size)
|
||||
{
|
||||
int maximum = (range + size - 1)->max;
|
||||
int remainder;
|
||||
|
||||
do {
|
||||
if (*value < range->min) {
|
||||
remainder = range->min - *value;
|
||||
*value = range->min; /* nearest valid value */
|
||||
return remainder;
|
||||
} else if ((range->min <= *value) && (*value <= range->max))
|
||||
return 0;
|
||||
|
||||
range++;
|
||||
} while (--size);
|
||||
*value = maximum;
|
||||
|
||||
return -1; /* invalid value */
|
||||
}
|
||||
|
||||
/**
|
||||
* calc_smc_vals - calculate SMC register values
|
||||
* @dev: ATA device
|
||||
* @setup: SMC_SETUP register value
|
||||
* @pulse: SMC_PULSE register value
|
||||
* @cycle: SMC_CYCLE register value
|
||||
*
|
||||
* This returns negative in case of invalid values for SMC registers:
|
||||
* -ER_SMC_RECALC - recalculation required for SMC values,
|
||||
* -ER_SMC_CALC - calculation failed (invalid input values).
|
||||
*
|
||||
* SMC use special coding scheme, see "Coding and Range of Timing
|
||||
* Parameters" table from AT91SAM9 datasheets.
|
||||
*
|
||||
* SMC_SETUP = 128*setup[5] + setup[4:0]
|
||||
* SMC_PULSE = 256*pulse[6] + pulse[5:0]
|
||||
* SMC_CYCLE = 256*cycle[8:7] + cycle[6:0]
|
||||
*/
|
||||
static int calc_smc_vals(struct device *dev,
|
||||
int *setup, int *pulse, int *cycle, int *cs_pulse)
|
||||
{
|
||||
int ret_val;
|
||||
int err = 0;
|
||||
struct smc_range range_setup[] = { /* SMC_SETUP valid values */
|
||||
{.min = 0, .max = 31}, /* first range */
|
||||
{.min = 128, .max = 159} /* second range */
|
||||
};
|
||||
struct smc_range range_pulse[] = { /* SMC_PULSE valid values */
|
||||
{.min = 0, .max = 63}, /* first range */
|
||||
{.min = 256, .max = 319} /* second range */
|
||||
};
|
||||
struct smc_range range_cycle[] = { /* SMC_CYCLE valid values */
|
||||
{.min = 0, .max = 127}, /* first range */
|
||||
{.min = 256, .max = 383}, /* second range */
|
||||
{.min = 512, .max = 639}, /* third range */
|
||||
{.min = 768, .max = 895} /* fourth range */
|
||||
};
|
||||
|
||||
ret_val = adjust_smc_value(setup, range_setup, ARRAY_SIZE(range_setup));
|
||||
if (ret_val < 0)
|
||||
dev_warn(dev, "maximal SMC Setup value\n");
|
||||
else
|
||||
*cycle += ret_val;
|
||||
|
||||
ret_val = adjust_smc_value(pulse, range_pulse, ARRAY_SIZE(range_pulse));
|
||||
if (ret_val < 0)
|
||||
dev_warn(dev, "maximal SMC Pulse value\n");
|
||||
else
|
||||
*cycle += ret_val;
|
||||
|
||||
ret_val = adjust_smc_value(cycle, range_cycle, ARRAY_SIZE(range_cycle));
|
||||
if (ret_val < 0)
|
||||
dev_warn(dev, "maximal SMC Cycle value\n");
|
||||
|
||||
*cs_pulse = *cycle;
|
||||
if (*cs_pulse > CS_PULSE_MAXIMUM) {
|
||||
dev_err(dev, "unable to calculate valid SMC settings\n");
|
||||
return -ER_SMC_CALC;
|
||||
}
|
||||
|
||||
ret_val = adjust_smc_value(cs_pulse, range_pulse,
|
||||
ARRAY_SIZE(range_pulse));
|
||||
if (ret_val < 0) {
|
||||
dev_warn(dev, "maximal SMC CS Pulse value\n");
|
||||
} else if (ret_val != 0) {
|
||||
*cycle = *cs_pulse;
|
||||
dev_warn(dev, "SMC Cycle extended\n");
|
||||
err = -ER_SMC_RECALC;
|
||||
}
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
/**
|
||||
* to_smc_format - convert values into SMC format
|
||||
* @setup: SETUP value of SMC Setup Register
|
||||
* @pulse: PULSE value of SMC Pulse Register
|
||||
* @cycle: CYCLE value of SMC Cycle Register
|
||||
* @cs_pulse: NCS_PULSE value of SMC Pulse Register
|
||||
*/
|
||||
static void to_smc_format(int *setup, int *pulse, int *cycle, int *cs_pulse)
|
||||
{
|
||||
*setup = (*setup & 0x1f) | ((*setup & 0x80) >> 2);
|
||||
*pulse = (*pulse & 0x3f) | ((*pulse & 0x100) >> 2);
|
||||
*cycle = (*cycle & 0x7f) | ((*cycle & 0x300) >> 1);
|
||||
*cs_pulse = (*cs_pulse & 0x3f) | ((*cs_pulse & 0x100) >> 2);
|
||||
}
|
||||
|
||||
static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
|
||||
{
|
||||
unsigned long mul;
|
||||
|
||||
/*
|
||||
* cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
|
||||
* x * (f / 1_000_000_000) =
|
||||
* x * ((f * 65536) / 1_000_000_000) / 65536 =
|
||||
* x * (((f / 10_000) * 65536) / 100_000) / 65536 =
|
||||
*/
|
||||
|
||||
mul = (mck_hz / 10000) << 16;
|
||||
mul /= 100000;
|
||||
|
||||
return (ns * mul + 65536) >> 16; /* rounding */
|
||||
}
|
||||
|
||||
/**
|
||||
* set_smc_timing - SMC timings setup.
|
||||
* @dev: device
|
||||
* @info: AT91 IDE info
|
||||
* @ata: ATA timings
|
||||
*
|
||||
* Its assumed that write timings are same as read timings,
|
||||
* cs_setup = 0 and cs_pulse = cycle.
|
||||
*/
|
||||
static void set_smc_timing(struct device *dev, struct ata_device *adev,
|
||||
struct at91_ide_info *info, const struct ata_timing *ata)
|
||||
{
|
||||
int ret = 0;
|
||||
int use_iordy;
|
||||
unsigned int t6z; /* data tristate time in ns */
|
||||
unsigned int cycle; /* SMC Cycle width in MCK ticks */
|
||||
unsigned int setup; /* SMC Setup width in MCK ticks */
|
||||
unsigned int pulse; /* CFIOR and CFIOW pulse width in MCK ticks */
|
||||
unsigned int cs_pulse; /* CS4 or CS5 pulse width in MCK ticks*/
|
||||
unsigned int tdf_cycles; /* SMC TDF MCK ticks */
|
||||
unsigned long mck_hz; /* MCK frequency in Hz */
|
||||
|
||||
t6z = (ata->mode < XFER_PIO_5) ? 30 : 20;
|
||||
mck_hz = clk_get_rate(info->mck);
|
||||
cycle = calc_mck_cycles(ata->cyc8b, mck_hz);
|
||||
setup = calc_mck_cycles(ata->setup, mck_hz);
|
||||
pulse = calc_mck_cycles(ata->act8b, mck_hz);
|
||||
tdf_cycles = calc_mck_cycles(t6z, mck_hz);
|
||||
|
||||
do {
|
||||
ret = calc_smc_vals(dev, &setup, &pulse, &cycle, &cs_pulse);
|
||||
} while (ret == -ER_SMC_RECALC);
|
||||
|
||||
if (ret == -ER_SMC_CALC)
|
||||
dev_err(dev, "Interface may not operate correctly\n");
|
||||
|
||||
dev_dbg(dev, "SMC Setup=%u, Pulse=%u, Cycle=%u, CS Pulse=%u\n",
|
||||
setup, pulse, cycle, cs_pulse);
|
||||
to_smc_format(&setup, &pulse, &cycle, &cs_pulse);
|
||||
/* disable or enable waiting for IORDY signal */
|
||||
use_iordy = ata_pio_need_iordy(adev);
|
||||
if (use_iordy)
|
||||
info->mode |= AT91_SMC_EXNWMODE_READY;
|
||||
|
||||
if (tdf_cycles > 15) {
|
||||
tdf_cycles = 15;
|
||||
dev_warn(dev, "maximal SMC TDF Cycles value\n");
|
||||
}
|
||||
|
||||
dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
|
||||
|
||||
regmap_fields_write(fields.setup, info->cs,
|
||||
AT91SAM9_SMC_NRDSETUP(setup) |
|
||||
AT91SAM9_SMC_NWESETUP(setup) |
|
||||
AT91SAM9_SMC_NCS_NRDSETUP(0) |
|
||||
AT91SAM9_SMC_NCS_WRSETUP(0));
|
||||
regmap_fields_write(fields.pulse, info->cs,
|
||||
AT91SAM9_SMC_NRDPULSE(pulse) |
|
||||
AT91SAM9_SMC_NWEPULSE(pulse) |
|
||||
AT91SAM9_SMC_NCS_NRDPULSE(cs_pulse) |
|
||||
AT91SAM9_SMC_NCS_WRPULSE(cs_pulse));
|
||||
regmap_fields_write(fields.cycle, info->cs,
|
||||
AT91SAM9_SMC_NRDCYCLE(cycle) |
|
||||
AT91SAM9_SMC_NWECYCLE(cycle));
|
||||
regmap_fields_write(fields.mode, info->cs, info->mode |
|
||||
AT91_SMC_TDF_(tdf_cycles));
|
||||
}
|
||||
|
||||
static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
||||
{
|
||||
struct at91_ide_info *info = ap->host->private_data;
|
||||
struct ata_timing timing;
|
||||
int ret;
|
||||
|
||||
/* Compute ATA timing and set it to SMC */
|
||||
ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0);
|
||||
if (ret) {
|
||||
dev_warn(ap->dev, "Failed to compute ATA timing %d, "
|
||||
"set PIO_0 timing\n", ret);
|
||||
timing = *ata_timing_find_mode(XFER_PIO_0);
|
||||
}
|
||||
set_smc_timing(ap->dev, adev, info, &timing);
|
||||
}
|
||||
|
||||
static unsigned int pata_at91_data_xfer_noirq(struct ata_queued_cmd *qc,
|
||||
unsigned char *buf, unsigned int buflen, int rw)
|
||||
{
|
||||
struct at91_ide_info *info = qc->dev->link->ap->host->private_data;
|
||||
unsigned int consumed;
|
||||
unsigned int mode;
|
||||
unsigned long flags;
|
||||
|
||||
local_irq_save(flags);
|
||||
regmap_fields_read(fields.mode, info->cs, &mode);
|
||||
|
||||
/* set 16bit mode before writing data */
|
||||
regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
|
||||
AT91_SMC_DBW_16);
|
||||
|
||||
consumed = ata_sff_data_xfer(qc, buf, buflen, rw);
|
||||
|
||||
/* restore 8bit mode after data is written */
|
||||
regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
|
||||
AT91_SMC_DBW_8);
|
||||
|
||||
local_irq_restore(flags);
|
||||
return consumed;
|
||||
}
|
||||
|
||||
static struct scsi_host_template pata_at91_sht = {
|
||||
ATA_PIO_SHT(DRV_NAME),
|
||||
};
|
||||
|
||||
static struct ata_port_operations pata_at91_port_ops = {
|
||||
.inherits = &ata_sff_port_ops,
|
||||
|
||||
.sff_data_xfer = pata_at91_data_xfer_noirq,
|
||||
.set_piomode = pata_at91_set_piomode,
|
||||
.cable_detect = ata_cable_40wire,
|
||||
};
|
||||
|
||||
static int at91sam9_smc_fields_init(struct device *dev)
|
||||
{
|
||||
struct reg_field field = REG_FIELD(0, 0, 31);
|
||||
|
||||
field.id_size = 8;
|
||||
field.id_offset = AT91SAM9_SMC_GENERIC_BLK_SZ;
|
||||
|
||||
field.reg = AT91SAM9_SMC_SETUP(AT91SAM9_SMC_GENERIC);
|
||||
fields.setup = devm_regmap_field_alloc(dev, smc, field);
|
||||
if (IS_ERR(fields.setup))
|
||||
return PTR_ERR(fields.setup);
|
||||
|
||||
field.reg = AT91SAM9_SMC_PULSE(AT91SAM9_SMC_GENERIC);
|
||||
fields.pulse = devm_regmap_field_alloc(dev, smc, field);
|
||||
if (IS_ERR(fields.pulse))
|
||||
return PTR_ERR(fields.pulse);
|
||||
|
||||
field.reg = AT91SAM9_SMC_CYCLE(AT91SAM9_SMC_GENERIC);
|
||||
fields.cycle = devm_regmap_field_alloc(dev, smc, field);
|
||||
if (IS_ERR(fields.cycle))
|
||||
return PTR_ERR(fields.cycle);
|
||||
|
||||
field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC);
|
||||
fields.mode = devm_regmap_field_alloc(dev, smc, field);
|
||||
|
||||
return PTR_ERR_OR_ZERO(fields.mode);
|
||||
}
|
||||
|
||||
static int pata_at91_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct at91_cf_data *board = dev_get_platdata(&pdev->dev);
|
||||
struct device *dev = &pdev->dev;
|
||||
struct at91_ide_info *info;
|
||||
struct resource *mem_res;
|
||||
struct ata_host *host;
|
||||
struct ata_port *ap;
|
||||
|
||||
int irq_flags = 0;
|
||||
int irq = 0;
|
||||
int ret;
|
||||
|
||||
/* get platform resources: IO/CTL memories and irq/rst pins */
|
||||
|
||||
if (pdev->num_resources != 1) {
|
||||
dev_err(&pdev->dev, "invalid number of resources\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
|
||||
if (!mem_res) {
|
||||
dev_err(dev, "failed to get mem resource\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
irq = board->irq_pin;
|
||||
|
||||
smc = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "atmel,smc");
|
||||
if (IS_ERR(smc))
|
||||
return PTR_ERR(smc);
|
||||
|
||||
ret = at91sam9_smc_fields_init(dev);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* init ata host */
|
||||
|
||||
host = ata_host_alloc(dev, 1);
|
||||
|
||||
if (!host)
|
||||
return -ENOMEM;
|
||||
|
||||
ap = host->ports[0];
|
||||
ap->ops = &pata_at91_port_ops;
|
||||
ap->flags |= ATA_FLAG_SLAVE_POSS;
|
||||
ap->pio_mask = ATA_PIO4;
|
||||
|
||||
if (!gpio_is_valid(irq)) {
|
||||
ap->flags |= ATA_FLAG_PIO_POLLING;
|
||||
ata_port_desc(ap, "no IRQ, using PIO polling");
|
||||
}
|
||||
|
||||
info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
|
||||
|
||||
if (!info) {
|
||||
dev_err(dev, "failed to allocate memory for private data\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
info->mck = clk_get(NULL, "mck");
|
||||
|
||||
if (IS_ERR(info->mck)) {
|
||||
dev_err(dev, "failed to get access to mck clock\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
info->cs = board->chipselect;
|
||||
info->mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
|
||||
AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
|
||||
AT91_SMC_DBW_8 | AT91_SMC_TDF_(0);
|
||||
|
||||
info->ide_addr = devm_ioremap(dev,
|
||||
mem_res->start + CF_IDE_OFFSET, CF_IDE_RES_SIZE);
|
||||
|
||||
if (!info->ide_addr) {
|
||||
dev_err(dev, "failed to map IO base\n");
|
||||
ret = -ENOMEM;
|
||||
goto err_put;
|
||||
}
|
||||
|
||||
info->alt_addr = devm_ioremap(dev,
|
||||
mem_res->start + CF_ALT_IDE_OFFSET, CF_IDE_RES_SIZE);
|
||||
|
||||
if (!info->alt_addr) {
|
||||
dev_err(dev, "failed to map CTL base\n");
|
||||
ret = -ENOMEM;
|
||||
goto err_put;
|
||||
}
|
||||
|
||||
ap->ioaddr.cmd_addr = info->ide_addr;
|
||||
ap->ioaddr.ctl_addr = info->alt_addr + 0x06;
|
||||
ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
|
||||
|
||||
ata_sff_std_ports(&ap->ioaddr);
|
||||
|
||||
ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx",
|
||||
(unsigned long long)mem_res->start + CF_IDE_OFFSET,
|
||||
(unsigned long long)mem_res->start + CF_ALT_IDE_OFFSET);
|
||||
|
||||
host->private_data = info;
|
||||
|
||||
ret = ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0,
|
||||
gpio_is_valid(irq) ? ata_sff_interrupt : NULL,
|
||||
irq_flags, &pata_at91_sht);
|
||||
if (ret)
|
||||
goto err_put;
|
||||
|
||||
return 0;
|
||||
|
||||
err_put:
|
||||
clk_put(info->mck);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int pata_at91_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct ata_host *host = platform_get_drvdata(pdev);
|
||||
struct at91_ide_info *info;
|
||||
|
||||
if (!host)
|
||||
return 0;
|
||||
info = host->private_data;
|
||||
|
||||
ata_host_detach(host);
|
||||
|
||||
if (!info)
|
||||
return 0;
|
||||
|
||||
clk_put(info->mck);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver pata_at91_driver = {
|
||||
.probe = pata_at91_probe,
|
||||
.remove = pata_at91_remove,
|
||||
.driver = {
|
||||
.name = DRV_NAME,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(pata_at91_driver);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC");
|
||||
MODULE_AUTHOR("Matyukevich Sergey");
|
||||
MODULE_VERSION(DRV_VERSION);
|
||||
|
||||
@ -1328,7 +1328,7 @@ static int pata_macio_pci_resume(struct pci_dev *pdev)
|
||||
}
|
||||
#endif /* CONFIG_PM_SLEEP */
|
||||
|
||||
static struct of_device_id pata_macio_match[] =
|
||||
static const struct of_device_id pata_macio_match[] =
|
||||
{
|
||||
{
|
||||
.name = "IDE",
|
||||
|
||||
@ -847,7 +847,7 @@ mpc52xx_ata_resume(struct platform_device *op)
|
||||
}
|
||||
#endif
|
||||
|
||||
static struct of_device_id mpc52xx_ata_of_match[] = {
|
||||
static const struct of_device_id mpc52xx_ata_of_match[] = {
|
||||
{ .compatible = "fsl,mpc5200-ata", },
|
||||
{ .compatible = "mpc5200-ata", },
|
||||
{},
|
||||
|
||||
@ -67,7 +67,7 @@ static int pata_of_platform_probe(struct platform_device *ofdev)
|
||||
reg_shift, pio_mask, &pata_platform_sht);
|
||||
}
|
||||
|
||||
static struct of_device_id pata_of_platform_match[] = {
|
||||
static const struct of_device_id pata_of_platform_match[] = {
|
||||
{ .compatible = "ata-generic", },
|
||||
{ },
|
||||
};
|
||||
|
||||
@ -1612,7 +1612,7 @@ static int sata_fsl_resume(struct platform_device *op)
|
||||
}
|
||||
#endif
|
||||
|
||||
static struct of_device_id fsl_sata_match[] = {
|
||||
static const struct of_device_id fsl_sata_match[] = {
|
||||
{
|
||||
.compatible = "fsl,pq-sata",
|
||||
},
|
||||
|
||||
@ -4286,7 +4286,7 @@ static int mv_platform_resume(struct platform_device *pdev)
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static struct of_device_id mv_sata_dt_ids[] = {
|
||||
static const struct of_device_id mv_sata_dt_ids[] = {
|
||||
{ .compatible = "marvell,armada-370-sata", },
|
||||
{ .compatible = "marvell,orion-sata", },
|
||||
{},
|
||||
|
||||
@ -817,11 +817,6 @@ static inline bool ata_id_sct_error_recovery_ctrl(const u16 *id)
|
||||
return id[ATA_ID_SCT_CMD_XPORT] & (1 << 3) ? true : false;
|
||||
}
|
||||
|
||||
static inline bool ata_id_sct_write_same(const u16 *id)
|
||||
{
|
||||
return id[ATA_ID_SCT_CMD_XPORT] & (1 << 2) ? true : false;
|
||||
}
|
||||
|
||||
static inline bool ata_id_sct_long_sector_access(const u16 *id)
|
||||
{
|
||||
return id[ATA_ID_SCT_CMD_XPORT] & (1 << 1) ? true : false;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user