mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 03:20:53 +07:00
[AVR32] Make I/O access macros work with external devices
Fix the I/O access macros so that they work with externally connected devices accessed in little-endian mode over any bus width: * Use a set of macros to define I/O port- and memory operations borrowed from MIPS. * Allow subarchitecture to specify address- and data-mangling * Implement at32ap-specific port mangling (with build-time configurable bus width. Only one bus width at a time supported for now.) * Rewrite iowriteN and friends to use write[bwl] and friends (not the __raw counterparts.) This has been tested using pata_pcmcia to access a CompactFlash card connected to the EBI (16-bit bus width.) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
This commit is contained in:
Haavard Skinnemoen
parent
92b728c147
commit
e3e7d8d4ea
@ -2,6 +2,30 @@ if PLATFORM_AT32AP
|
||||
|
||||
menu "Atmel AVR32 AP options"
|
||||
|
||||
choice
|
||||
prompt "AT32AP7000 static memory bus width"
|
||||
depends on CPU_AT32AP7000
|
||||
default AP7000_16_BIT_SMC
|
||||
help
|
||||
Define the width of the AP7000 external static memory interface.
|
||||
This is used to determine how to mangle the address and/or data
|
||||
when doing little-endian port access.
|
||||
|
||||
The current code can only support a single external memory bus
|
||||
width for all chip selects, excluding the flash (which is using
|
||||
raw access and is thus not affected by any of this.)
|
||||
|
||||
config AP7000_32_BIT_SMC
|
||||
bool "32 bit"
|
||||
|
||||
config AP7000_16_BIT_SMC
|
||||
bool "16 bit"
|
||||
|
||||
config AP7000_8_BIT_SMC
|
||||
bool "8 bit"
|
||||
|
||||
endchoice
|
||||
|
||||
endmenu
|
||||
|
||||
endif
|
||||
endif # PLATFORM_AT32AP
|
||||
|
||||
39
include/asm-avr32/arch-at32ap/io.h
Normal file
39
include/asm-avr32/arch-at32ap/io.h
Normal file
@ -0,0 +1,39 @@
|
||||
#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
|
||||
#define __ASM_AVR32_ARCH_AT32AP_IO_H
|
||||
|
||||
/* For "bizarre" halfword swapping */
|
||||
#include <linux/byteorder/swabb.h>
|
||||
|
||||
#if defined(CONFIG_AP7000_32_BIT_SMC)
|
||||
# define __swizzle_addr_b(addr) (addr ^ 3UL)
|
||||
# define __swizzle_addr_w(addr) (addr ^ 2UL)
|
||||
# define __swizzle_addr_l(addr) (addr)
|
||||
# define ioswabb(a, x) (x)
|
||||
# define ioswabw(a, x) (x)
|
||||
# define ioswabl(a, x) (x)
|
||||
# define __mem_ioswabb(a, x) (x)
|
||||
# define __mem_ioswabw(a, x) swab16(x)
|
||||
# define __mem_ioswabl(a, x) swab32(x)
|
||||
#elif defined(CONFIG_AP7000_16_BIT_SMC)
|
||||
# define __swizzle_addr_b(addr) (addr ^ 1UL)
|
||||
# define __swizzle_addr_w(addr) (addr)
|
||||
# define __swizzle_addr_l(addr) (addr)
|
||||
# define ioswabb(a, x) (x)
|
||||
# define ioswabw(a, x) (x)
|
||||
# define ioswabl(a, x) swahw32(x)
|
||||
# define __mem_ioswabb(a, x) (x)
|
||||
# define __mem_ioswabw(a, x) swab16(x)
|
||||
# define __mem_ioswabl(a, x) swahb32(x)
|
||||
#else
|
||||
# define __swizzle_addr_b(addr) (addr)
|
||||
# define __swizzle_addr_w(addr) (addr)
|
||||
# define __swizzle_addr_l(addr) (addr)
|
||||
# define ioswabb(a, x) (x)
|
||||
# define ioswabw(a, x) swab16(x)
|
||||
# define ioswabl(a, x) swab32(x)
|
||||
# define __mem_ioswabb(a, x) (x)
|
||||
# define __mem_ioswabw(a, x) (x)
|
||||
# define __mem_ioswabl(a, x) (x)
|
||||
#endif
|
||||
|
||||
#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */
|
||||
@ -1,13 +1,15 @@
|
||||
#ifndef __ASM_AVR32_IO_H
|
||||
#define __ASM_AVR32_IO_H
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/string.h>
|
||||
|
||||
#ifdef __KERNEL__
|
||||
#include <linux/types.h>
|
||||
|
||||
#include <asm/addrspace.h>
|
||||
#include <asm/byteorder.h>
|
||||
|
||||
#include <asm/arch/io.h>
|
||||
|
||||
/* virt_to_phys will only work when address is in P1 or P2 */
|
||||
static __inline__ unsigned long virt_to_phys(volatile void *address)
|
||||
{
|
||||
@ -36,205 +38,236 @@ extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
|
||||
extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
|
||||
extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
|
||||
|
||||
static inline void writeb(unsigned char b, volatile void __iomem *addr)
|
||||
static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
|
||||
{
|
||||
*(volatile unsigned char __force *)addr = b;
|
||||
*(volatile u8 __force *)addr = v;
|
||||
}
|
||||
static inline void writew(unsigned short b, volatile void __iomem *addr)
|
||||
static inline void __raw_writew(u16 v, volatile void __iomem *addr)
|
||||
{
|
||||
*(volatile unsigned short __force *)addr = b;
|
||||
*(volatile u16 __force *)addr = v;
|
||||
}
|
||||
static inline void writel(unsigned int b, volatile void __iomem *addr)
|
||||
static inline void __raw_writel(u32 v, volatile void __iomem *addr)
|
||||
{
|
||||
*(volatile unsigned int __force *)addr = b;
|
||||
*(volatile u32 __force *)addr = v;
|
||||
}
|
||||
#define __raw_writeb writeb
|
||||
#define __raw_writew writew
|
||||
#define __raw_writel writel
|
||||
|
||||
static inline unsigned char readb(const volatile void __iomem *addr)
|
||||
static inline u8 __raw_readb(const volatile void __iomem *addr)
|
||||
{
|
||||
return *(const volatile unsigned char __force *)addr;
|
||||
return *(const volatile u8 __force *)addr;
|
||||
}
|
||||
static inline unsigned short readw(const volatile void __iomem *addr)
|
||||
static inline u16 __raw_readw(const volatile void __iomem *addr)
|
||||
{
|
||||
return *(const volatile unsigned short __force *)addr;
|
||||
return *(const volatile u16 __force *)addr;
|
||||
}
|
||||
static inline unsigned int readl(const volatile void __iomem *addr)
|
||||
static inline u32 __raw_readl(const volatile void __iomem *addr)
|
||||
{
|
||||
return *(const volatile unsigned int __force *)addr;
|
||||
return *(const volatile u32 __force *)addr;
|
||||
}
|
||||
#define __raw_readb readb
|
||||
#define __raw_readw readw
|
||||
#define __raw_readl readl
|
||||
|
||||
#define writesb(p, d, l) __raw_writesb((unsigned int)p, d, l)
|
||||
#define writesw(p, d, l) __raw_writesw((unsigned int)p, d, l)
|
||||
#define writesl(p, d, l) __raw_writesl((unsigned int)p, d, l)
|
||||
/* Convert I/O port address to virtual address */
|
||||
#ifndef __io
|
||||
# define __io(p) ((void *)phys_to_uncached(p))
|
||||
#endif
|
||||
|
||||
#define readsb(p, d, l) __raw_readsb((unsigned int)p, d, l)
|
||||
#define readsw(p, d, l) __raw_readsw((unsigned int)p, d, l)
|
||||
#define readsl(p, d, l) __raw_readsl((unsigned int)p, d, l)
|
||||
/*
|
||||
* Not really sure about the best way to slow down I/O on
|
||||
* AVR32. Defining it as a no-op until we have an actual test case.
|
||||
*/
|
||||
#define SLOW_DOWN_IO do { } while (0)
|
||||
|
||||
#define __BUILD_MEMORY_SINGLE(pfx, bwl, type) \
|
||||
static inline void \
|
||||
pfx##write##bwl(type val, volatile void __iomem *addr) \
|
||||
{ \
|
||||
volatile type *__addr; \
|
||||
type __val; \
|
||||
\
|
||||
__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \
|
||||
__val = pfx##ioswab##bwl(__addr, val); \
|
||||
\
|
||||
BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
|
||||
\
|
||||
*__addr = __val; \
|
||||
} \
|
||||
\
|
||||
static inline type pfx##read##bwl(const volatile void __iomem *addr) \
|
||||
{ \
|
||||
volatile type *__addr; \
|
||||
type __val; \
|
||||
\
|
||||
__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \
|
||||
\
|
||||
BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
|
||||
\
|
||||
__val = *__addr; \
|
||||
return pfx##ioswab##bwl(__addr, __val); \
|
||||
}
|
||||
|
||||
#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow) \
|
||||
static inline void pfx##out##bwl##p(type val, unsigned long port) \
|
||||
{ \
|
||||
volatile type *__addr; \
|
||||
type __val; \
|
||||
\
|
||||
__addr = __io(__swizzle_addr_##bwl(port)); \
|
||||
__val = pfx##ioswab##bwl(__addr, val); \
|
||||
\
|
||||
BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
|
||||
\
|
||||
*__addr = __val; \
|
||||
slow; \
|
||||
} \
|
||||
\
|
||||
static inline type pfx##in##bwl##p(unsigned long port) \
|
||||
{ \
|
||||
volatile type *__addr; \
|
||||
type __val; \
|
||||
\
|
||||
__addr = __io(__swizzle_addr_##bwl(port)); \
|
||||
\
|
||||
BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
|
||||
\
|
||||
__val = *__addr; \
|
||||
slow; \
|
||||
\
|
||||
return pfx##ioswab##bwl(__addr, __val); \
|
||||
}
|
||||
|
||||
#define __BUILD_MEMORY_PFX(bus, bwl, type) \
|
||||
__BUILD_MEMORY_SINGLE(bus, bwl, type)
|
||||
|
||||
#define BUILDIO_MEM(bwl, type) \
|
||||
__BUILD_MEMORY_PFX(, bwl, type) \
|
||||
__BUILD_MEMORY_PFX(__mem_, bwl, type)
|
||||
|
||||
#define __BUILD_IOPORT_PFX(bus, bwl, type) \
|
||||
__BUILD_IOPORT_SINGLE(bus, bwl, type, ,) \
|
||||
__BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO)
|
||||
|
||||
#define BUILDIO_IOPORT(bwl, type) \
|
||||
__BUILD_IOPORT_PFX(, bwl, type) \
|
||||
__BUILD_IOPORT_PFX(__mem_, bwl, type)
|
||||
|
||||
BUILDIO_MEM(b, u8)
|
||||
BUILDIO_MEM(w, u16)
|
||||
BUILDIO_MEM(l, u32)
|
||||
|
||||
BUILDIO_IOPORT(b, u8)
|
||||
BUILDIO_IOPORT(w, u16)
|
||||
BUILDIO_IOPORT(l, u32)
|
||||
|
||||
#define readb_relaxed readb
|
||||
#define readw_relaxed readw
|
||||
#define readl_relaxed readl
|
||||
|
||||
#define __BUILD_MEMORY_STRING(bwl, type) \
|
||||
static inline void writes##bwl(volatile void __iomem *addr, \
|
||||
const void *data, unsigned int count) \
|
||||
{ \
|
||||
const type *__data = data; \
|
||||
\
|
||||
while (count--) \
|
||||
__mem_write##bwl(*__data++, addr); \
|
||||
} \
|
||||
\
|
||||
static inline void reads##bwl(const volatile void __iomem *addr, \
|
||||
void *data, unsigned int count) \
|
||||
{ \
|
||||
type *__data = data; \
|
||||
\
|
||||
while (count--) \
|
||||
*__data++ = __mem_read##bwl(addr); \
|
||||
}
|
||||
|
||||
#define __BUILD_IOPORT_STRING(bwl, type) \
|
||||
static inline void outs##bwl(unsigned long port, const void *data, \
|
||||
unsigned int count) \
|
||||
{ \
|
||||
const type *__data = data; \
|
||||
\
|
||||
while (count--) \
|
||||
__mem_out##bwl(*__data++, port); \
|
||||
} \
|
||||
\
|
||||
static inline void ins##bwl(unsigned long port, void *data, \
|
||||
unsigned int count) \
|
||||
{ \
|
||||
type *__data = data; \
|
||||
\
|
||||
while (count--) \
|
||||
*__data++ = __mem_in##bwl(port); \
|
||||
}
|
||||
|
||||
#define BUILDSTRING(bwl, type) \
|
||||
__BUILD_MEMORY_STRING(bwl, type) \
|
||||
__BUILD_IOPORT_STRING(bwl, type)
|
||||
|
||||
BUILDSTRING(b, u8)
|
||||
BUILDSTRING(w, u16)
|
||||
BUILDSTRING(l, u32)
|
||||
|
||||
/*
|
||||
* io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be
|
||||
*/
|
||||
#ifndef ioread8
|
||||
|
||||
#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; })
|
||||
#define ioread8(p) ((unsigned int)readb(p))
|
||||
|
||||
#define ioread16(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(p)); __v; })
|
||||
#define ioread16be(p) ({ unsigned int __v = be16_to_cpu(__raw_readw(p)); __v; })
|
||||
#define ioread16(p) ((unsigned int)readw(p))
|
||||
#define ioread16be(p) ((unsigned int)__raw_readw(p))
|
||||
|
||||
#define ioread32(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(p)); __v; })
|
||||
#define ioread32be(p) ({ unsigned int __v = be32_to_cpu(__raw_readl(p)); __v; })
|
||||
#define ioread32(p) ((unsigned int)readl(p))
|
||||
#define ioread32be(p) ((unsigned int)__raw_readl(p))
|
||||
|
||||
#define iowrite8(v,p) __raw_writeb(v, p)
|
||||
#define iowrite8(v,p) writeb(v, p)
|
||||
|
||||
#define iowrite16(v,p) __raw_writew(cpu_to_le16(v), p)
|
||||
#define iowrite16be(v,p) __raw_writew(cpu_to_be16(v), p)
|
||||
#define iowrite16(v,p) writew(v, p)
|
||||
#define iowrite16be(v,p) __raw_writew(v, p)
|
||||
|
||||
#define iowrite32(v,p) __raw_writel(cpu_to_le32(v), p)
|
||||
#define iowrite32be(v,p) __raw_writel(cpu_to_be32(v), p)
|
||||
#define iowrite32(v,p) writel(v, p)
|
||||
#define iowrite32be(v,p) __raw_writel(v, p)
|
||||
|
||||
#define ioread8_rep(p,d,c) __raw_readsb(p,d,c)
|
||||
#define ioread16_rep(p,d,c) __raw_readsw(p,d,c)
|
||||
#define ioread32_rep(p,d,c) __raw_readsl(p,d,c)
|
||||
#define ioread8_rep(p,d,c) readsb(p,d,c)
|
||||
#define ioread16_rep(p,d,c) readsw(p,d,c)
|
||||
#define ioread32_rep(p,d,c) readsl(p,d,c)
|
||||
|
||||
#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c)
|
||||
#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c)
|
||||
#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c)
|
||||
#define iowrite8_rep(p,s,c) writesb(p,s,c)
|
||||
#define iowrite16_rep(p,s,c) writesw(p,s,c)
|
||||
#define iowrite32_rep(p,s,c) writesl(p,s,c)
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* These two are only here because ALSA _thinks_ it needs them...
|
||||
*/
|
||||
static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
|
||||
unsigned long count)
|
||||
{
|
||||
char *p = to;
|
||||
while (count) {
|
||||
count--;
|
||||
*p = readb(from);
|
||||
p++;
|
||||
from++;
|
||||
}
|
||||
volatile const char __iomem *addr = from;
|
||||
|
||||
while (count--)
|
||||
*p++ = readb(addr++);
|
||||
}
|
||||
|
||||
static inline void memcpy_toio(volatile void __iomem *to, const void * from,
|
||||
unsigned long count)
|
||||
{
|
||||
const char *p = from;
|
||||
while (count) {
|
||||
count--;
|
||||
writeb(*p, to);
|
||||
p++;
|
||||
to++;
|
||||
}
|
||||
volatile char __iomem *addr = to;
|
||||
|
||||
while (count--)
|
||||
writeb(*p++, addr++);
|
||||
}
|
||||
|
||||
static inline void memset_io(volatile void __iomem *addr, unsigned char val,
|
||||
unsigned long count)
|
||||
{
|
||||
memset((void __force *)addr, val, count);
|
||||
}
|
||||
volatile char __iomem *p = addr;
|
||||
|
||||
/*
|
||||
* Bad read/write accesses...
|
||||
*/
|
||||
extern void __readwrite_bug(const char *fn);
|
||||
while (count--)
|
||||
writeb(val, p++);
|
||||
}
|
||||
|
||||
#define IO_SPACE_LIMIT 0xffffffff
|
||||
|
||||
/* Convert I/O port address to virtual address */
|
||||
#define __io(p) ((void __iomem *)phys_to_uncached(p))
|
||||
|
||||
/*
|
||||
* IO port access primitives
|
||||
* -------------------------
|
||||
*
|
||||
* The AVR32 doesn't have special IO access instructions; all IO is memory
|
||||
* mapped. Note that these are defined to perform little endian accesses
|
||||
* only. Their primary purpose is to access PCI and ISA peripherals.
|
||||
*
|
||||
* Note that for a big endian machine, this implies that the following
|
||||
* big endian mode connectivity is in place.
|
||||
*
|
||||
* The machine specific io.h include defines __io to translate an "IO"
|
||||
* address to a memory address.
|
||||
*
|
||||
* Note that we prevent GCC re-ordering or caching values in expressions
|
||||
* by introducing sequence points into the in*() definitions. Note that
|
||||
* __raw_* do not guarantee this behaviour.
|
||||
*
|
||||
* The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
|
||||
*/
|
||||
#define outb(v, p) __raw_writeb(v, __io(p))
|
||||
#define outw(v, p) __raw_writew(cpu_to_le16(v), __io(p))
|
||||
#define outl(v, p) __raw_writel(cpu_to_le32(v), __io(p))
|
||||
|
||||
#define inb(p) __raw_readb(__io(p))
|
||||
#define inw(p) le16_to_cpu(__raw_readw(__io(p)))
|
||||
#define inl(p) le32_to_cpu(__raw_readl(__io(p)))
|
||||
|
||||
static inline void __outsb(unsigned long port, void *addr, unsigned int count)
|
||||
{
|
||||
while (count--) {
|
||||
outb(*(u8 *)addr, port);
|
||||
addr++;
|
||||
}
|
||||
}
|
||||
|
||||
static inline void __insb(unsigned long port, void *addr, unsigned int count)
|
||||
{
|
||||
while (count--) {
|
||||
*(u8 *)addr = inb(port);
|
||||
addr++;
|
||||
}
|
||||
}
|
||||
|
||||
static inline void __outsw(unsigned long port, void *addr, unsigned int count)
|
||||
{
|
||||
while (count--) {
|
||||
outw(*(u16 *)addr, port);
|
||||
addr += 2;
|
||||
}
|
||||
}
|
||||
|
||||
static inline void __insw(unsigned long port, void *addr, unsigned int count)
|
||||
{
|
||||
while (count--) {
|
||||
*(u16 *)addr = inw(port);
|
||||
addr += 2;
|
||||
}
|
||||
}
|
||||
|
||||
static inline void __outsl(unsigned long port, void *addr, unsigned int count)
|
||||
{
|
||||
while (count--) {
|
||||
outl(*(u32 *)addr, port);
|
||||
addr += 4;
|
||||
}
|
||||
}
|
||||
|
||||
static inline void __insl(unsigned long port, void *addr, unsigned int count)
|
||||
{
|
||||
while (count--) {
|
||||
*(u32 *)addr = inl(port);
|
||||
addr += 4;
|
||||
}
|
||||
}
|
||||
|
||||
#define outsb(port, addr, count) __outsb(port, addr, count)
|
||||
#define insb(port, addr, count) __insb(port, addr, count)
|
||||
#define outsw(port, addr, count) __outsw(port, addr, count)
|
||||
#define insw(port, addr, count) __insw(port, addr, count)
|
||||
#define outsl(port, addr, count) __outsl(port, addr, count)
|
||||
#define insl(port, addr, count) __insl(port, addr, count)
|
||||
|
||||
extern void __iomem *__ioremap(unsigned long offset, size_t size,
|
||||
unsigned long flags);
|
||||
extern void __iounmap(void __iomem *addr);
|
||||
@ -292,6 +325,4 @@ extern void __iounmap(void __iomem *addr);
|
||||
*/
|
||||
#define xlate_dev_kmem_ptr(p) p
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
#endif /* __ASM_AVR32_IO_H */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user