From e37fbf0527d4e6f531d9b854d4fd70c36c578879 Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Fri, 18 May 2018 14:10:21 +0530 Subject: [PATCH] ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO There are two registers on am43x needed for IO daisy chain wake to work properly, however currently after an RTC+DDR cycle they are lost. We must take care to save and restore these before and after entering RTC mode otherwise IO daisy chain wake will stop working from DeepSleep after resuming. Signed-off-by: Dave Gerlach Signed-off-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/prm44xx.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 47b657ceba8f..18b4955ff755 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -57,6 +57,13 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = { .reconfigure_io_chain = &omap44xx_prm_reconfigure_io_chain, }; +struct omap_prm_irq_context { + unsigned long irq_enable; + unsigned long pm_ctrl; +}; + +static struct omap_prm_irq_context omap_prm_context; + /* * omap44xx_prm_reset_src_map - map from bits in the PRM_RSTST * hardware register (which are specific to OMAP44xx SoCs) to reset @@ -739,6 +746,28 @@ struct pwrdm_ops omap4_pwrdm_operations = { static int omap44xx_prm_late_init(void); +void prm_save_context(void) +{ + omap_prm_context.irq_enable = + omap4_prm_read_inst_reg(AM43XX_PRM_OCP_SOCKET_INST, + omap4_prcm_irq_setup.mask); + + omap_prm_context.pm_ctrl = + omap4_prm_read_inst_reg(AM43XX_PRM_DEVICE_INST, + omap4_prcm_irq_setup.pm_ctrl); +} + +void prm_restore_context(void) +{ + omap4_prm_write_inst_reg(omap_prm_context.irq_enable, + OMAP4430_PRM_OCP_SOCKET_INST, + omap4_prcm_irq_setup.mask); + + omap4_prm_write_inst_reg(omap_prm_context.pm_ctrl, + AM43XX_PRM_DEVICE_INST, + omap4_prcm_irq_setup.pm_ctrl); +} + /* * XXX document */