mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 08:30:54 +07:00
Merge commit 'v2.6.32-rc5' into for-2.6.33
This commit is contained in:
commit
e343eb0d60
@ -31,3 +31,31 @@ Date: March 2009
|
||||
Kernel Version: 2.6.30
|
||||
Contact: iss_storagedev@hp.com
|
||||
Description: A symbolic link to /sys/block/cciss!cXdY
|
||||
|
||||
Where: /sys/bus/pci/devices/<dev>/ccissX/rescan
|
||||
Date: August 2009
|
||||
Kernel Version: 2.6.31
|
||||
Contact: iss_storagedev@hp.com
|
||||
Description: Kicks of a rescan of the controller to discover logical
|
||||
drive topology changes.
|
||||
|
||||
Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid
|
||||
Date: August 2009
|
||||
Kernel Version: 2.6.31
|
||||
Contact: iss_storagedev@hp.com
|
||||
Description: Displays the 8-byte LUN ID used to address logical
|
||||
drive Y of controller X.
|
||||
|
||||
Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level
|
||||
Date: August 2009
|
||||
Kernel Version: 2.6.31
|
||||
Contact: iss_storagedev@hp.com
|
||||
Description: Displays the RAID level of logical drive Y of
|
||||
controller X.
|
||||
|
||||
Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count
|
||||
Date: August 2009
|
||||
Kernel Version: 2.6.31
|
||||
Contact: iss_storagedev@hp.com
|
||||
Description: Displays the usage count (number of opens) of logical drive Y
|
||||
of controller X.
|
||||
|
@ -1,4 +1,4 @@
|
||||
What: /sys/class/usb_host/usb_hostN/wusb_chid
|
||||
What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_chid
|
||||
Date: July 2008
|
||||
KernelVersion: 2.6.27
|
||||
Contact: David Vrabel <david.vrabel@csr.com>
|
||||
@ -9,7 +9,7 @@ Description:
|
||||
|
||||
Set an all zero CHID to stop the host controller.
|
||||
|
||||
What: /sys/class/usb_host/usb_hostN/wusb_trust_timeout
|
||||
What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_trust_timeout
|
||||
Date: July 2008
|
||||
KernelVersion: 2.6.27
|
||||
Contact: David Vrabel <david.vrabel@csr.com>
|
@ -232,7 +232,7 @@ your e-mail client so that it sends your patches untouched.
|
||||
When sending patches to Linus, always follow step #7.
|
||||
|
||||
Large changes are not appropriate for mailing lists, and some
|
||||
maintainers. If your patch, uncompressed, exceeds 40 kB in size,
|
||||
maintainers. If your patch, uncompressed, exceeds 300 kB in size,
|
||||
it is preferred that you store your patch on an Internet-accessible
|
||||
server, and provide instead a URL (link) pointing to your patch.
|
||||
|
||||
|
@ -29,11 +29,13 @@ TCM location and size. Notice that this is not a MMU table: you
|
||||
actually move the physical location of the TCM around. At the
|
||||
place you put it, it will mask any underlying RAM from the
|
||||
CPU so it is usually wise not to overlap any physical RAM with
|
||||
the TCM. The TCM memory exists totally outside the MMU and will
|
||||
override any MMU mappings.
|
||||
the TCM.
|
||||
|
||||
Code executing inside the ITCM does not "see" any MMU mappings
|
||||
and e.g. register accesses must be made to physical addresses.
|
||||
The TCM memory can then be remapped to another address again using
|
||||
the MMU, but notice that the TCM if often used in situations where
|
||||
the MMU is turned off. To avoid confusion the current Linux
|
||||
implementation will map the TCM 1 to 1 from physical to virtual
|
||||
memory in the location specified by the machine.
|
||||
|
||||
TCM is used for a few things:
|
||||
|
||||
|
@ -227,7 +227,14 @@ as the path relative to the root of the cgroup file system.
|
||||
Each cgroup is represented by a directory in the cgroup file system
|
||||
containing the following files describing that cgroup:
|
||||
|
||||
- tasks: list of tasks (by pid) attached to that cgroup
|
||||
- tasks: list of tasks (by pid) attached to that cgroup. This list
|
||||
is not guaranteed to be sorted. Writing a thread id into this file
|
||||
moves the thread into this cgroup.
|
||||
- cgroup.procs: list of tgids in the cgroup. This list is not
|
||||
guaranteed to be sorted or free of duplicate tgids, and userspace
|
||||
should sort/uniquify the list if this property is required.
|
||||
Writing a tgid into this file moves all threads with that tgid into
|
||||
this cgroup.
|
||||
- notify_on_release flag: run the release agent on exit?
|
||||
- release_agent: the path to use for release notifications (this file
|
||||
exists in the top cgroup only)
|
||||
@ -374,7 +381,7 @@ Now you want to do something with this cgroup.
|
||||
|
||||
In this directory you can find several files:
|
||||
# ls
|
||||
notify_on_release tasks
|
||||
cgroup.procs notify_on_release tasks
|
||||
(plus whatever files added by the attached subsystems)
|
||||
|
||||
Now attach your shell to this cgroup:
|
||||
|
@ -34,7 +34,7 @@ static char cn_test_name[] = "cn_test";
|
||||
static struct sock *nls;
|
||||
static struct timer_list cn_test_timer;
|
||||
|
||||
static void cn_test_callback(struct cn_msg *msg)
|
||||
static void cn_test_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
|
||||
{
|
||||
pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
|
||||
__func__, jiffies, msg->id.idx, msg->id.val,
|
||||
|
@ -23,7 +23,7 @@ handling, etc... The Connector driver allows any kernelspace agents to use
|
||||
netlink based networking for inter-process communication in a significantly
|
||||
easier way:
|
||||
|
||||
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
|
||||
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
|
||||
void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask);
|
||||
|
||||
struct cb_id
|
||||
@ -53,15 +53,15 @@ struct cn_msg
|
||||
Connector interfaces.
|
||||
/*****************************************/
|
||||
|
||||
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
|
||||
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
|
||||
|
||||
Registers new callback with connector core.
|
||||
|
||||
struct cb_id *id - unique connector's user identifier.
|
||||
It must be registered in connector.h for legal in-kernel users.
|
||||
char *name - connector's callback symbolic name.
|
||||
void (*callback) (void *) - connector's callback.
|
||||
Argument must be dereferenced to struct cn_msg *.
|
||||
void (*callback) (struct cn..) - connector's callback.
|
||||
cn_msg and the sender's credentials
|
||||
|
||||
|
||||
void cn_del_callback(struct cb_id *id);
|
||||
|
@ -64,14 +64,14 @@ be used to view the printk buffer of a remote machine, even with live update.
|
||||
|
||||
Bernhard Kaindl enhanced firescope to support accessing 64-bit machines
|
||||
from 32-bit firescope and vice versa:
|
||||
- ftp://ftp.suse.de/private/bk/firewire/tools/firescope-0.2.2.tar.bz2
|
||||
- http://halobates.de/firewire/firescope-0.2.2.tar.bz2
|
||||
|
||||
and he implemented fast system dump (alpha version - read README.txt):
|
||||
- ftp://ftp.suse.de/private/bk/firewire/tools/firedump-0.1.tar.bz2
|
||||
- http://halobates.de/firewire/firedump-0.1.tar.bz2
|
||||
|
||||
There is also a gdb proxy for firewire which allows to use gdb to access
|
||||
data which can be referenced from symbols found by gdb in vmlinux:
|
||||
- ftp://ftp.suse.de/private/bk/firewire/tools/fireproxy-0.33.tar.bz2
|
||||
- http://halobates.de/firewire/fireproxy-0.33.tar.bz2
|
||||
|
||||
The latest version of this gdb proxy (fireproxy-0.34) can communicate (not
|
||||
yet stable) with kgdb over an memory-based communication module (kgdbom).
|
||||
@ -178,7 +178,7 @@ Step-by-step instructions for using firescope with early OHCI initialization:
|
||||
|
||||
Notes
|
||||
-----
|
||||
Documentation and specifications: ftp://ftp.suse.de/private/bk/firewire/docs
|
||||
Documentation and specifications: http://halobates.de/firewire/
|
||||
|
||||
FireWire is a trademark of Apple Inc. - for more information please refer to:
|
||||
http://en.wikipedia.org/wiki/FireWire
|
||||
|
@ -451,3 +451,33 @@ Why: OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
|
||||
will also allow making ALSA OSS emulation independent of
|
||||
sound_core. The dependency will be broken then too.
|
||||
Who: Tejun Heo <tj@kernel.org>
|
||||
|
||||
----------------------------
|
||||
|
||||
What: Support for VMware's guest paravirtuliazation technique [VMI] will be
|
||||
dropped.
|
||||
When: 2.6.37 or earlier.
|
||||
Why: With the recent innovations in CPU hardware acceleration technologies
|
||||
from Intel and AMD, VMware ran a few experiments to compare these
|
||||
techniques to guest paravirtualization technique on VMware's platform.
|
||||
These hardware assisted virtualization techniques have outperformed the
|
||||
performance benefits provided by VMI in most of the workloads. VMware
|
||||
expects that these hardware features will be ubiquitous in a couple of
|
||||
years, as a result, VMware has started a phased retirement of this
|
||||
feature from the hypervisor. We will be removing this feature from the
|
||||
Kernel too. Right now we are targeting 2.6.37 but can retire earlier if
|
||||
technical reasons (read opportunity to remove major chunk of pvops)
|
||||
arise.
|
||||
|
||||
Please note that VMI has always been an optimization and non-VMI kernels
|
||||
still work fine on VMware's platform.
|
||||
Latest versions of VMware's product which support VMI are,
|
||||
Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
|
||||
releases for these products will continue supporting VMI.
|
||||
|
||||
For more details about VMI retirement take a look at this,
|
||||
http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html
|
||||
|
||||
Who: Alok N Kataria <akataria@vmware.com>
|
||||
|
||||
----------------------------
|
||||
|
@ -123,10 +123,18 @@ resuid=n The user ID which may use the reserved blocks.
|
||||
|
||||
sb=n Use alternate superblock at this location.
|
||||
|
||||
quota
|
||||
noquota
|
||||
grpquota
|
||||
usrquota
|
||||
quota These options are ignored by the filesystem. They
|
||||
noquota are used only by quota tools to recognize volumes
|
||||
grpquota where quota should be turned on. See documentation
|
||||
usrquota in the quota-tools package for more details
|
||||
(http://sourceforge.net/projects/linuxquota).
|
||||
|
||||
jqfmt=<quota type> These options tell filesystem details about quota
|
||||
usrjquota=<file> so that quota information can be properly updated
|
||||
grpjquota=<file> during journal replay. They replace the above
|
||||
quota options. See documentation in the quota-tools
|
||||
package for more details
|
||||
(http://sourceforge.net/projects/linuxquota).
|
||||
|
||||
bh (*) ext3 associates buffer heads to data pages to
|
||||
nobh (a) cache disk block mapping information
|
||||
|
@ -282,9 +282,16 @@ stripe=n Number of filesystem blocks that mballoc will try
|
||||
to use for allocation size and alignment. For RAID5/6
|
||||
systems this should be the number of data
|
||||
disks * RAID chunk size in file system blocks.
|
||||
delalloc (*) Deferring block allocation until write-out time.
|
||||
nodelalloc Disable delayed allocation. Blocks are allocation
|
||||
when data is copied from user to page cache.
|
||||
|
||||
delalloc (*) Defer block allocation until just before ext4
|
||||
writes out the block(s) in question. This
|
||||
allows ext4 to better allocation decisions
|
||||
more efficiently.
|
||||
nodelalloc Disable delayed allocation. Blocks are allocated
|
||||
when the data is copied from userspace to the
|
||||
page cache, either via the write(2) system call
|
||||
or when an mmap'ed page which was previously
|
||||
unallocated is written for the first time.
|
||||
|
||||
max_batch_time=usec Maximum amount of time ext4 should wait for
|
||||
additional filesystem operations to be batch
|
||||
|
@ -1113,7 +1113,6 @@ Table 1-12: Files in /proc/fs/ext4/<devname>
|
||||
..............................................................................
|
||||
File Content
|
||||
mb_groups details of multiblock allocator buddy cache of free blocks
|
||||
mb_history multiblock allocation history
|
||||
..............................................................................
|
||||
|
||||
|
||||
|
@ -102,7 +102,7 @@ shortname=lower|win95|winnt|mixed
|
||||
winnt: emulate the Windows NT rule for display/create.
|
||||
mixed: emulate the Windows NT rule for display,
|
||||
emulate the Windows 95 rule for create.
|
||||
Default setting is `lower'.
|
||||
Default setting is `mixed'.
|
||||
|
||||
tz=UTC -- Interpret timestamps as UTC rather than local time.
|
||||
This option disables the conversion of timestamps
|
||||
|
@ -1,5 +1,5 @@
|
||||
Using flexible arrays in the kernel
|
||||
Last updated for 2.6.31
|
||||
Last updated for 2.6.32
|
||||
Jonathan Corbet <corbet@lwn.net>
|
||||
|
||||
Large contiguous memory allocations can be unreliable in the Linux kernel.
|
||||
@ -40,6 +40,13 @@ argument is passed directly to the internal memory allocation calls. With
|
||||
the current code, using flags to ask for high memory is likely to lead to
|
||||
notably unpleasant side effects.
|
||||
|
||||
It is also possible to define flexible arrays at compile time with:
|
||||
|
||||
DEFINE_FLEX_ARRAY(name, element_size, total);
|
||||
|
||||
This macro will result in a definition of an array with the given name; the
|
||||
element size and total will be checked for validity at compile time.
|
||||
|
||||
Storing data into a flexible array is accomplished with a call to:
|
||||
|
||||
int flex_array_put(struct flex_array *array, unsigned int element_nr,
|
||||
@ -76,16 +83,30 @@ particular element has never been allocated.
|
||||
Note that it is possible to get back a valid pointer for an element which
|
||||
has never been stored in the array. Memory for array elements is allocated
|
||||
one page at a time; a single allocation could provide memory for several
|
||||
adjacent elements. The flexible array code does not know if a specific
|
||||
element has been written; it only knows if the associated memory is
|
||||
present. So a flex_array_get() call on an element which was never stored
|
||||
in the array has the potential to return a pointer to random data. If the
|
||||
caller does not have a separate way to know which elements were actually
|
||||
stored, it might be wise, at least, to add GFP_ZERO to the flags argument
|
||||
to ensure that all elements are zeroed.
|
||||
adjacent elements. Flexible array elements are normally initialized to the
|
||||
value FLEX_ARRAY_FREE (defined as 0x6c in <linux/poison.h>), so errors
|
||||
involving that number probably result from use of unstored array entries.
|
||||
Note that, if array elements are allocated with __GFP_ZERO, they will be
|
||||
initialized to zero and this poisoning will not happen.
|
||||
|
||||
There is no way to remove a single element from the array. It is possible,
|
||||
though, to remove all elements with a call to:
|
||||
Individual elements in the array can be cleared with:
|
||||
|
||||
int flex_array_clear(struct flex_array *array, unsigned int element_nr);
|
||||
|
||||
This function will set the given element to FLEX_ARRAY_FREE and return
|
||||
zero. If storage for the indicated element is not allocated for the array,
|
||||
flex_array_clear() will return -EINVAL instead. Note that clearing an
|
||||
element does not release the storage associated with it; to reduce the
|
||||
allocated size of an array, call:
|
||||
|
||||
int flex_array_shrink(struct flex_array *array);
|
||||
|
||||
The return value will be the number of pages of memory actually freed.
|
||||
This function works by scanning the array for pages containing nothing but
|
||||
FLEX_ARRAY_FREE bytes, so (1) it can be expensive, and (2) it will not work
|
||||
if the array's pages are allocated with __GFP_ZERO.
|
||||
|
||||
It is possible to remove all elements of an array with a call to:
|
||||
|
||||
void flex_array_free_parts(struct flex_array *array);
|
||||
|
||||
|
@ -22,12 +22,13 @@ Usage Notes
|
||||
-----------
|
||||
|
||||
This driver does not probe for LTC4215 devices, due to the fact that some
|
||||
of the possible addresses are unfriendly to probing. You will need to use
|
||||
the "force" parameter to tell the driver where to find the device.
|
||||
of the possible addresses are unfriendly to probing. You will have to
|
||||
instantiate the devices explicitly.
|
||||
|
||||
Example: the following will load the driver for an LTC4215 at address 0x44
|
||||
on I2C bus #0:
|
||||
$ modprobe ltc4215 force=0,0x44
|
||||
$ modprobe ltc4215
|
||||
$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device
|
||||
|
||||
|
||||
Sysfs entries
|
||||
|
@ -23,12 +23,13 @@ Usage Notes
|
||||
-----------
|
||||
|
||||
This driver does not probe for LTC4245 devices, due to the fact that some
|
||||
of the possible addresses are unfriendly to probing. You will need to use
|
||||
the "force" parameter to tell the driver where to find the device.
|
||||
of the possible addresses are unfriendly to probing. You will have to
|
||||
instantiate the devices explicitly.
|
||||
|
||||
Example: the following will load the driver for an LTC4245 at address 0x23
|
||||
on I2C bus #1:
|
||||
$ modprobe ltc4245 force=1,0x23
|
||||
$ modprobe ltc4245
|
||||
$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device
|
||||
|
||||
|
||||
Sysfs entries
|
||||
|
@ -188,7 +188,7 @@ segment, the address is sufficient to uniquely identify the device to be
|
||||
deleted.
|
||||
|
||||
Example:
|
||||
# echo eeprom 0x50 > /sys/class/i2c-adapter/i2c-3/new_device
|
||||
# echo eeprom 0x50 > /sys/bus/i2c/devices/i2c-3/new_device
|
||||
|
||||
While this interface should only be used when in-kernel device declaration
|
||||
can't be done, there is a variety of cases where it can be helpful:
|
||||
|
@ -128,8 +128,8 @@ Setting IsSM Capability Bit
|
||||
To create the appropriate character device files automatically with
|
||||
udev, a rule like
|
||||
|
||||
KERNEL="umad*", NAME="infiniband/%k"
|
||||
KERNEL="issm*", NAME="infiniband/%k"
|
||||
KERNEL=="umad*", NAME="infiniband/%k"
|
||||
KERNEL=="issm*", NAME="infiniband/%k"
|
||||
|
||||
can be used. This will create device nodes named
|
||||
|
||||
|
@ -58,7 +58,7 @@ Memory pinning
|
||||
To create the appropriate character device files automatically with
|
||||
udev, a rule like
|
||||
|
||||
KERNEL="uverbs*", NAME="infiniband/%k"
|
||||
KERNEL=="uverbs*", NAME="infiniband/%k"
|
||||
|
||||
can be used. This will create device nodes named
|
||||
|
||||
|
@ -60,10 +60,9 @@ open() operation on regular files or character devices.
|
||||
|
||||
After a successful return from register_appl(), CAPI messages from the
|
||||
application may be passed to the driver for the device via calls to the
|
||||
send_message() callback function. The CAPI message to send is stored in the
|
||||
data portion of an skb. Conversely, the driver may call Kernel CAPI's
|
||||
capi_ctr_handle_message() function to pass a received CAPI message to Kernel
|
||||
CAPI for forwarding to an application, specifying its ApplID.
|
||||
send_message() callback function. Conversely, the driver may call Kernel
|
||||
CAPI's capi_ctr_handle_message() function to pass a received CAPI message to
|
||||
Kernel CAPI for forwarding to an application, specifying its ApplID.
|
||||
|
||||
Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
|
||||
forwarded as calls to the release_appl() callback function, passing the same
|
||||
@ -142,6 +141,7 @@ u16 (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
|
||||
to accepting or queueing the message. Errors occurring during the
|
||||
actual processing of the message should be signaled with an
|
||||
appropriate reply message.
|
||||
May be called in process or interrupt context.
|
||||
Calls to this function are not serialized by Kernel CAPI, ie. it must
|
||||
be prepared to be re-entered.
|
||||
|
||||
@ -154,7 +154,8 @@ read_proc_t *ctr_read_proc
|
||||
system entry, /proc/capi/controllers/<n>; will be called with a
|
||||
pointer to the device's capi_ctr structure as the last (data) argument
|
||||
|
||||
Note: Callback functions are never called in interrupt context.
|
||||
Note: Callback functions except send_message() are never called in interrupt
|
||||
context.
|
||||
|
||||
- to be filled in before calling capi_ctr_ready():
|
||||
|
||||
@ -171,14 +172,40 @@ u8 serial[CAPI_SERIAL_LEN]
|
||||
value to return for CAPI_GET_SERIAL
|
||||
|
||||
|
||||
4.3 The _cmsg Structure
|
||||
4.3 SKBs
|
||||
|
||||
CAPI messages are passed between Kernel CAPI and the driver via send_message()
|
||||
and capi_ctr_handle_message(), stored in the data portion of a socket buffer
|
||||
(skb). Each skb contains a single CAPI message coded according to the CAPI 2.0
|
||||
standard.
|
||||
|
||||
For the data transfer messages, DATA_B3_REQ and DATA_B3_IND, the actual
|
||||
payload data immediately follows the CAPI message itself within the same skb.
|
||||
The Data and Data64 parameters are not used for processing. The Data64
|
||||
parameter may be omitted by setting the length field of the CAPI message to 22
|
||||
instead of 30.
|
||||
|
||||
|
||||
4.4 The _cmsg Structure
|
||||
|
||||
(declared in <linux/isdn/capiutil.h>)
|
||||
|
||||
The _cmsg structure stores the contents of a CAPI 2.0 message in an easily
|
||||
accessible form. It contains members for all possible CAPI 2.0 parameters, of
|
||||
which only those appearing in the message type currently being processed are
|
||||
actually used. Unused members should be set to zero.
|
||||
accessible form. It contains members for all possible CAPI 2.0 parameters,
|
||||
including subparameters of the Additional Info and B Protocol structured
|
||||
parameters, with the following exceptions:
|
||||
|
||||
* second Calling party number (CONNECT_IND)
|
||||
|
||||
* Data64 (DATA_B3_REQ and DATA_B3_IND)
|
||||
|
||||
* Sending complete (subparameter of Additional Info, CONNECT_REQ and INFO_REQ)
|
||||
|
||||
* Global Configuration (subparameter of B Protocol, CONNECT_REQ, CONNECT_RESP
|
||||
and SELECT_B_PROTOCOL_REQ)
|
||||
|
||||
Only those parameters appearing in the message type currently being processed
|
||||
are actually used. Unused members should be set to zero.
|
||||
|
||||
Members are named after the CAPI 2.0 standard names of the parameters they
|
||||
represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data
|
||||
@ -190,18 +217,19 @@ u16 for CAPI parameters of type 'word'
|
||||
|
||||
u32 for CAPI parameters of type 'dword'
|
||||
|
||||
_cstruct for CAPI parameters of type 'struct' not containing any
|
||||
variably-sized (struct) subparameters (eg. 'Called Party Number')
|
||||
_cstruct for CAPI parameters of type 'struct'
|
||||
The member is a pointer to a buffer containing the parameter in
|
||||
CAPI encoding (length + content). It may also be NULL, which will
|
||||
be taken to represent an empty (zero length) parameter.
|
||||
Subparameters are stored in encoded form within the content part.
|
||||
|
||||
_cmstruct for CAPI parameters of type 'struct' containing 'struct'
|
||||
subparameters ('Additional Info' and 'B Protocol')
|
||||
_cmstruct alternative representation for CAPI parameters of type 'struct'
|
||||
(used only for the 'Additional Info' and 'B Protocol' parameters)
|
||||
The representation is a single byte containing one of the values:
|
||||
CAPI_DEFAULT: the parameter is empty
|
||||
CAPI_COMPOSE: the values of the subparameters are stored
|
||||
individually in the corresponding _cmsg structure members
|
||||
CAPI_DEFAULT: The parameter is empty/absent.
|
||||
CAPI_COMPOSE: The parameter is present.
|
||||
Subparameter values are stored individually in the corresponding
|
||||
_cmsg structure members.
|
||||
|
||||
Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
|
||||
messages between their transport encoding described in the CAPI 2.0 standard
|
||||
@ -297,3 +325,26 @@ char *capi_cmd2str(u8 Command, u8 Subcommand)
|
||||
be NULL if the command/subcommand is not one of those defined in the
|
||||
CAPI 2.0 standard.
|
||||
|
||||
|
||||
7. Debugging
|
||||
|
||||
The module kernelcapi has a module parameter showcapimsgs controlling some
|
||||
debugging output produced by the module. It can only be set when the module is
|
||||
loaded, via a parameter "showcapimsgs=<n>" to the modprobe command, either on
|
||||
the command line or in the configuration file.
|
||||
|
||||
If the lowest bit of showcapimsgs is set, kernelcapi logs controller and
|
||||
application up and down events.
|
||||
|
||||
In addition, every registered CAPI controller has an associated traceflag
|
||||
parameter controlling how CAPI messages sent from and to tha controller are
|
||||
logged. The traceflag parameter is initialized with the value of the
|
||||
showcapimsgs parameter when the controller is registered, but can later be
|
||||
changed via the MANUFACTURER_REQ command KCAPI_CMD_TRACE.
|
||||
|
||||
If the value of traceflag is non-zero, CAPI messages are logged.
|
||||
DATA_B3 messages are only logged if the value of traceflag is > 2.
|
||||
|
||||
If the lowest bit of traceflag is set, only the command/subcommand and message
|
||||
length are logged. Otherwise, kernelcapi logs a readable representation of
|
||||
the entire message.
|
||||
|
@ -671,6 +671,7 @@ and is between 256 and 4096 characters. It is defined in the file
|
||||
earlyprintk= [X86,SH,BLACKFIN]
|
||||
earlyprintk=vga
|
||||
earlyprintk=serial[,ttySn[,baudrate]]
|
||||
earlyprintk=ttySn[,baudrate]
|
||||
earlyprintk=dbgp[debugController#]
|
||||
|
||||
Append ",keep" to not disable it when the real console
|
||||
|
@ -42,10 +42,12 @@ General Remarks
|
||||
|
||||
Valid addresses for the MAX6875 are 0x50 and 0x52.
|
||||
Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
|
||||
The driver does not probe any address, so you must force the address.
|
||||
The driver does not probe any address, so you explicitly instantiate the
|
||||
devices.
|
||||
|
||||
Example:
|
||||
$ modprobe max6875 force=0,0x50
|
||||
$ modprobe max6875
|
||||
$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device
|
||||
|
||||
The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
|
||||
addresses. For example, for address 0x50, it also reserves 0x51.
|
@ -90,6 +90,11 @@ Examples:
|
||||
pgset "dstmac 00:00:00:00:00:00" sets MAC destination address
|
||||
pgset "srcmac 00:00:00:00:00:00" sets MAC source address
|
||||
|
||||
pgset "queue_map_min 0" Sets the min value of tx queue interval
|
||||
pgset "queue_map_max 7" Sets the max value of tx queue interval, for multiqueue devices
|
||||
To select queue 1 of a given device,
|
||||
use queue_map_min=1 and queue_map_max=1
|
||||
|
||||
pgset "src_mac_count 1" Sets the number of MACs we'll range through.
|
||||
The 'minimum' MAC is what you set with srcmac.
|
||||
|
||||
@ -101,6 +106,9 @@ Examples:
|
||||
IPDST_RND, UDPSRC_RND,
|
||||
UDPDST_RND, MACSRC_RND, MACDST_RND
|
||||
MPLS_RND, VID_RND, SVID_RND
|
||||
QUEUE_MAP_RND # queue map random
|
||||
QUEUE_MAP_CPU # queue map mirrors smp_processor_id()
|
||||
|
||||
|
||||
pgset "udp_src_min 9" set UDP source port min, If < udp_src_max, then
|
||||
cycle through the port range.
|
||||
|
@ -381,7 +381,7 @@ int main(int argc, char **argv)
|
||||
memset(&hwtstamp, 0, sizeof(hwtstamp));
|
||||
strncpy(hwtstamp.ifr_name, interface, sizeof(hwtstamp.ifr_name));
|
||||
hwtstamp.ifr_data = (void *)&hwconfig;
|
||||
memset(&hwconfig, 0, sizeof(&hwconfig));
|
||||
memset(&hwconfig, 0, sizeof(hwconfig));
|
||||
hwconfig.tx_type =
|
||||
(so_timestamping_flags & SOF_TIMESTAMPING_TX_HARDWARE) ?
|
||||
HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;
|
||||
|
@ -3,6 +3,25 @@ HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop)
|
||||
Controller Register Map
|
||||
-------------------------
|
||||
|
||||
For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
|
||||
|
||||
BAR0 offset Register
|
||||
0x11C5C Link Interface IRQ Set
|
||||
0x11C60 Link Interface IRQ Clear
|
||||
|
||||
BAR2 offset Register
|
||||
0x10 Inbound Message Register 0
|
||||
0x14 Inbound Message Register 1
|
||||
0x18 Outbound Message Register 0
|
||||
0x1C Outbound Message Register 1
|
||||
0x20 Inbound Doorbell Register
|
||||
0x24 Inbound Interrupt Status Register
|
||||
0x28 Inbound Interrupt Mask Register
|
||||
0x30 Outbound Interrupt Status Register
|
||||
0x34 Outbound Interrupt Mask Register
|
||||
0x40 Inbound Queue Port
|
||||
0x44 Outbound Queue Port
|
||||
|
||||
For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
|
||||
|
||||
BAR0 offset Register
|
||||
@ -93,7 +112,7 @@ The driver exposes following sysfs attributes:
|
||||
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
|
||||
Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
|
||||
|
||||
This file is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
|
@ -209,6 +209,7 @@ AD1884A / AD1883 / AD1984A / AD1984B
|
||||
laptop laptop with HP jack sensing
|
||||
mobile mobile devices with HP jack sensing
|
||||
thinkpad Lenovo Thinkpad X300
|
||||
touchsmart HP Touchsmart
|
||||
|
||||
AD1884
|
||||
======
|
||||
@ -358,6 +359,7 @@ STAC9227/9228/9229/927x
|
||||
5stack-no-fp D965 5stack without front panel
|
||||
dell-3stack Dell Dimension E520
|
||||
dell-bios Fixes with Dell BIOS setup
|
||||
volknob Fixes with volume-knob widget 0x24
|
||||
auto BIOS setup (default)
|
||||
|
||||
STAC92HD71B*
|
||||
|
@ -52,15 +52,15 @@ The KSM daemon is controlled by sysfs files in /sys/kernel/mm/ksm/,
|
||||
readable by all but writable only by root:
|
||||
|
||||
max_kernel_pages - set to maximum number of kernel pages that KSM may use
|
||||
e.g. "echo 2000 > /sys/kernel/mm/ksm/max_kernel_pages"
|
||||
e.g. "echo 100000 > /sys/kernel/mm/ksm/max_kernel_pages"
|
||||
Value 0 imposes no limit on the kernel pages KSM may use;
|
||||
but note that any process using MADV_MERGEABLE can cause
|
||||
KSM to allocate these pages, unswappable until it exits.
|
||||
Default: 2000 (chosen for demonstration purposes)
|
||||
Default: quarter of memory (chosen to not pin too much)
|
||||
|
||||
pages_to_scan - how many present pages to scan before ksmd goes to sleep
|
||||
e.g. "echo 200 > /sys/kernel/mm/ksm/pages_to_scan"
|
||||
Default: 200 (chosen for demonstration purposes)
|
||||
e.g. "echo 100 > /sys/kernel/mm/ksm/pages_to_scan"
|
||||
Default: 100 (chosen for demonstration purposes)
|
||||
|
||||
sleep_millisecs - how many milliseconds ksmd should sleep before next scan
|
||||
e.g. "echo 20 > /sys/kernel/mm/ksm/sleep_millisecs"
|
||||
@ -70,7 +70,8 @@ run - set 0 to stop ksmd from running but keep merged pages,
|
||||
set 1 to run ksmd e.g. "echo 1 > /sys/kernel/mm/ksm/run",
|
||||
set 2 to stop ksmd and unmerge all pages currently merged,
|
||||
but leave mergeable areas registered for next run
|
||||
Default: 1 (for immediate use by apps which register)
|
||||
Default: 0 (must be changed to 1 to activate KSM,
|
||||
except if CONFIG_SYSFS is disabled)
|
||||
|
||||
The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/:
|
||||
|
||||
@ -86,4 +87,4 @@ pages_volatile embraces several different kinds of activity, but a high
|
||||
proportion there would also indicate poor use of madvise MADV_MERGEABLE.
|
||||
|
||||
Izik Eidus,
|
||||
Hugh Dickins, 30 July 2009
|
||||
Hugh Dickins, 24 Sept 2009
|
||||
|
@ -2,7 +2,10 @@
|
||||
* page-types: Tool for querying page flags
|
||||
*
|
||||
* Copyright (C) 2009 Intel corporation
|
||||
* Copyright (C) 2009 Wu Fengguang <fengguang.wu@intel.com>
|
||||
*
|
||||
* Authors: Wu Fengguang <fengguang.wu@intel.com>
|
||||
*
|
||||
* Released under the General Public License (GPL).
|
||||
*/
|
||||
|
||||
#define _LARGEFILE64_SOURCE
|
||||
@ -69,7 +72,9 @@
|
||||
#define KPF_COMPOUND_TAIL 16
|
||||
#define KPF_HUGE 17
|
||||
#define KPF_UNEVICTABLE 18
|
||||
#define KPF_HWPOISON 19
|
||||
#define KPF_NOPAGE 20
|
||||
#define KPF_KSM 21
|
||||
|
||||
/* [32-] kernel hacking assistances */
|
||||
#define KPF_RESERVED 32
|
||||
@ -116,7 +121,9 @@ static char *page_flag_names[] = {
|
||||
[KPF_COMPOUND_TAIL] = "T:compound_tail",
|
||||
[KPF_HUGE] = "G:huge",
|
||||
[KPF_UNEVICTABLE] = "u:unevictable",
|
||||
[KPF_HWPOISON] = "X:hwpoison",
|
||||
[KPF_NOPAGE] = "n:nopage",
|
||||
[KPF_KSM] = "x:ksm",
|
||||
|
||||
[KPF_RESERVED] = "r:reserved",
|
||||
[KPF_MLOCKED] = "m:mlocked",
|
||||
@ -152,9 +159,6 @@ static unsigned long opt_size[MAX_ADDR_RANGES];
|
||||
static int nr_vmas;
|
||||
static unsigned long pg_start[MAX_VMAS];
|
||||
static unsigned long pg_end[MAX_VMAS];
|
||||
static unsigned long voffset;
|
||||
|
||||
static int pagemap_fd;
|
||||
|
||||
#define MAX_BIT_FILTERS 64
|
||||
static int nr_bit_filters;
|
||||
@ -163,9 +167,16 @@ static uint64_t opt_bits[MAX_BIT_FILTERS];
|
||||
|
||||
static int page_size;
|
||||
|
||||
#define PAGES_BATCH (64 << 10) /* 64k pages */
|
||||
static int pagemap_fd;
|
||||
static int kpageflags_fd;
|
||||
|
||||
static int opt_hwpoison;
|
||||
static int opt_unpoison;
|
||||
|
||||
static char *hwpoison_debug_fs = "/debug/hwpoison";
|
||||
static int hwpoison_inject_fd;
|
||||
static int hwpoison_forget_fd;
|
||||
|
||||
#define HASH_SHIFT 13
|
||||
#define HASH_SIZE (1 << HASH_SHIFT)
|
||||
#define HASH_MASK (HASH_SIZE - 1)
|
||||
@ -207,6 +218,74 @@ static void fatal(const char *x, ...)
|
||||
exit(EXIT_FAILURE);
|
||||
}
|
||||
|
||||
int checked_open(const char *pathname, int flags)
|
||||
{
|
||||
int fd = open(pathname, flags);
|
||||
|
||||
if (fd < 0) {
|
||||
perror(pathname);
|
||||
exit(EXIT_FAILURE);
|
||||
}
|
||||
|
||||
return fd;
|
||||
}
|
||||
|
||||
/*
|
||||
* pagemap/kpageflags routines
|
||||
*/
|
||||
|
||||
static unsigned long do_u64_read(int fd, char *name,
|
||||
uint64_t *buf,
|
||||
unsigned long index,
|
||||
unsigned long count)
|
||||
{
|
||||
long bytes;
|
||||
|
||||
if (index > ULONG_MAX / 8)
|
||||
fatal("index overflow: %lu\n", index);
|
||||
|
||||
if (lseek(fd, index * 8, SEEK_SET) < 0) {
|
||||
perror(name);
|
||||
exit(EXIT_FAILURE);
|
||||
}
|
||||
|
||||
bytes = read(fd, buf, count * 8);
|
||||
if (bytes < 0) {
|
||||
perror(name);
|
||||
exit(EXIT_FAILURE);
|
||||
}
|
||||
if (bytes % 8)
|
||||
fatal("partial read: %lu bytes\n", bytes);
|
||||
|
||||
return bytes / 8;
|
||||
}
|
||||
|
||||
static unsigned long kpageflags_read(uint64_t *buf,
|
||||
unsigned long index,
|
||||
unsigned long pages)
|
||||
{
|
||||
return do_u64_read(kpageflags_fd, PROC_KPAGEFLAGS, buf, index, pages);
|
||||
}
|
||||
|
||||
static unsigned long pagemap_read(uint64_t *buf,
|
||||
unsigned long index,
|
||||
unsigned long pages)
|
||||
{
|
||||
return do_u64_read(pagemap_fd, "/proc/pid/pagemap", buf, index, pages);
|
||||
}
|
||||
|
||||
static unsigned long pagemap_pfn(uint64_t val)
|
||||
{
|
||||
unsigned long pfn;
|
||||
|
||||
if (val & PM_PRESENT)
|
||||
pfn = PM_PFRAME(val);
|
||||
else
|
||||
pfn = 0;
|
||||
|
||||
return pfn;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* page flag names
|
||||
@ -255,7 +334,8 @@ static char *page_flag_longname(uint64_t flags)
|
||||
* page list and summary
|
||||
*/
|
||||
|
||||
static void show_page_range(unsigned long offset, uint64_t flags)
|
||||
static void show_page_range(unsigned long voffset,
|
||||
unsigned long offset, uint64_t flags)
|
||||
{
|
||||
static uint64_t flags0;
|
||||
static unsigned long voff;
|
||||
@ -281,7 +361,8 @@ static void show_page_range(unsigned long offset, uint64_t flags)
|
||||
count = 1;
|
||||
}
|
||||
|
||||
static void show_page(unsigned long offset, uint64_t flags)
|
||||
static void show_page(unsigned long voffset,
|
||||
unsigned long offset, uint64_t flags)
|
||||
{
|
||||
if (opt_pid)
|
||||
printf("%lx\t", voffset);
|
||||
@ -362,6 +443,62 @@ static uint64_t well_known_flags(uint64_t flags)
|
||||
return flags;
|
||||
}
|
||||
|
||||
static uint64_t kpageflags_flags(uint64_t flags)
|
||||
{
|
||||
flags = expand_overloaded_flags(flags);
|
||||
|
||||
if (!opt_raw)
|
||||
flags = well_known_flags(flags);
|
||||
|
||||
return flags;
|
||||
}
|
||||
|
||||
/*
|
||||
* page actions
|
||||
*/
|
||||
|
||||
static void prepare_hwpoison_fd(void)
|
||||
{
|
||||
char buf[100];
|
||||
|
||||
if (opt_hwpoison && !hwpoison_inject_fd) {
|
||||
sprintf(buf, "%s/corrupt-pfn", hwpoison_debug_fs);
|
||||
hwpoison_inject_fd = checked_open(buf, O_WRONLY);
|
||||
}
|
||||
|
||||
if (opt_unpoison && !hwpoison_forget_fd) {
|
||||
sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
|
||||
hwpoison_forget_fd = checked_open(buf, O_WRONLY);
|
||||
}
|
||||
}
|
||||
|
||||
static int hwpoison_page(unsigned long offset)
|
||||
{
|
||||
char buf[100];
|
||||
int len;
|
||||
|
||||
len = sprintf(buf, "0x%lx\n", offset);
|
||||
len = write(hwpoison_inject_fd, buf, len);
|
||||
if (len < 0) {
|
||||
perror("hwpoison inject");
|
||||
return len;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int unpoison_page(unsigned long offset)
|
||||
{
|
||||
char buf[100];
|
||||
int len;
|
||||
|
||||
len = sprintf(buf, "0x%lx\n", offset);
|
||||
len = write(hwpoison_forget_fd, buf, len);
|
||||
if (len < 0) {
|
||||
perror("hwpoison forget");
|
||||
return len;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* page frame walker
|
||||
@ -394,104 +531,83 @@ static int hash_slot(uint64_t flags)
|
||||
exit(EXIT_FAILURE);
|
||||
}
|
||||
|
||||
static void add_page(unsigned long offset, uint64_t flags)
|
||||
static void add_page(unsigned long voffset,
|
||||
unsigned long offset, uint64_t flags)
|
||||
{
|
||||
flags = expand_overloaded_flags(flags);
|
||||
|
||||
if (!opt_raw)
|
||||
flags = well_known_flags(flags);
|
||||
flags = kpageflags_flags(flags);
|
||||
|
||||
if (!bit_mask_ok(flags))
|
||||
return;
|
||||
|
||||
if (opt_hwpoison)
|
||||
hwpoison_page(offset);
|
||||
if (opt_unpoison)
|
||||
unpoison_page(offset);
|
||||
|
||||
if (opt_list == 1)
|
||||
show_page_range(offset, flags);
|
||||
show_page_range(voffset, offset, flags);
|
||||
else if (opt_list == 2)
|
||||
show_page(offset, flags);
|
||||
show_page(voffset, offset, flags);
|
||||
|
||||
nr_pages[hash_slot(flags)]++;
|
||||
total_pages++;
|
||||
}
|
||||
|
||||
static void walk_pfn(unsigned long index, unsigned long count)
|
||||
#define KPAGEFLAGS_BATCH (64 << 10) /* 64k pages */
|
||||
static void walk_pfn(unsigned long voffset,
|
||||
unsigned long index,
|
||||
unsigned long count)
|
||||
{
|
||||
uint64_t buf[KPAGEFLAGS_BATCH];
|
||||
unsigned long batch;
|
||||
unsigned long n;
|
||||
unsigned long pages;
|
||||
unsigned long i;
|
||||
|
||||
if (index > ULONG_MAX / KPF_BYTES)
|
||||
fatal("index overflow: %lu\n", index);
|
||||
|
||||
lseek(kpageflags_fd, index * KPF_BYTES, SEEK_SET);
|
||||
|
||||
while (count) {
|
||||
uint64_t kpageflags_buf[KPF_BYTES * PAGES_BATCH];
|
||||
|
||||
batch = min_t(unsigned long, count, PAGES_BATCH);
|
||||
n = read(kpageflags_fd, kpageflags_buf, batch * KPF_BYTES);
|
||||
if (n == 0)
|
||||
batch = min_t(unsigned long, count, KPAGEFLAGS_BATCH);
|
||||
pages = kpageflags_read(buf, index, batch);
|
||||
if (pages == 0)
|
||||
break;
|
||||
if (n < 0) {
|
||||
perror(PROC_KPAGEFLAGS);
|
||||
exit(EXIT_FAILURE);
|
||||
}
|
||||
|
||||
if (n % KPF_BYTES != 0)
|
||||
fatal("partial read: %lu bytes\n", n);
|
||||
n = n / KPF_BYTES;
|
||||
for (i = 0; i < pages; i++)
|
||||
add_page(voffset + i, index + i, buf[i]);
|
||||
|
||||
for (i = 0; i < n; i++)
|
||||
add_page(index + i, kpageflags_buf[i]);
|
||||
|
||||
index += batch;
|
||||
count -= batch;
|
||||
index += pages;
|
||||
count -= pages;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#define PAGEMAP_BATCH 4096
|
||||
static unsigned long task_pfn(unsigned long pgoff)
|
||||
#define PAGEMAP_BATCH (64 << 10)
|
||||
static void walk_vma(unsigned long index, unsigned long count)
|
||||
{
|
||||
static uint64_t buf[PAGEMAP_BATCH];
|
||||
static unsigned long start;
|
||||
static long count;
|
||||
uint64_t pfn;
|
||||
uint64_t buf[PAGEMAP_BATCH];
|
||||
unsigned long batch;
|
||||
unsigned long pages;
|
||||
unsigned long pfn;
|
||||
unsigned long i;
|
||||
|
||||
if (pgoff < start || pgoff >= start + count) {
|
||||
if (lseek64(pagemap_fd,
|
||||
(uint64_t)pgoff * PM_ENTRY_BYTES,
|
||||
SEEK_SET) < 0) {
|
||||
perror("pagemap seek");
|
||||
exit(EXIT_FAILURE);
|
||||
while (count) {
|
||||
batch = min_t(unsigned long, count, PAGEMAP_BATCH);
|
||||
pages = pagemap_read(buf, index, batch);
|
||||
if (pages == 0)
|
||||
break;
|
||||
|
||||
for (i = 0; i < pages; i++) {
|
||||
pfn = pagemap_pfn(buf[i]);
|
||||
if (pfn)
|
||||
walk_pfn(index + i, pfn, 1);
|
||||
}
|
||||
count = read(pagemap_fd, buf, sizeof(buf));
|
||||
if (count == 0)
|
||||
return 0;
|
||||
if (count < 0) {
|
||||
perror("pagemap read");
|
||||
exit(EXIT_FAILURE);
|
||||
}
|
||||
if (count % PM_ENTRY_BYTES) {
|
||||
fatal("pagemap read not aligned.\n");
|
||||
exit(EXIT_FAILURE);
|
||||
}
|
||||
count /= PM_ENTRY_BYTES;
|
||||
start = pgoff;
|
||||
|
||||
index += pages;
|
||||
count -= pages;
|
||||
}
|
||||
|
||||
pfn = buf[pgoff - start];
|
||||
if (pfn & PM_PRESENT)
|
||||
pfn = PM_PFRAME(pfn);
|
||||
else
|
||||
pfn = 0;
|
||||
|
||||
return pfn;
|
||||
}
|
||||
|
||||
static void walk_task(unsigned long index, unsigned long count)
|
||||
{
|
||||
int i = 0;
|
||||
const unsigned long end = index + count;
|
||||
unsigned long start;
|
||||
int i = 0;
|
||||
|
||||
while (index < end) {
|
||||
|
||||
@ -501,15 +617,11 @@ static void walk_task(unsigned long index, unsigned long count)
|
||||
if (pg_start[i] >= end)
|
||||
return;
|
||||
|
||||
voffset = max_t(unsigned long, pg_start[i], index);
|
||||
index = min_t(unsigned long, pg_end[i], end);
|
||||
start = max_t(unsigned long, pg_start[i], index);
|
||||
index = min_t(unsigned long, pg_end[i], end);
|
||||
|
||||
assert(voffset < index);
|
||||
for (; voffset < index; voffset++) {
|
||||
unsigned long pfn = task_pfn(voffset);
|
||||
if (pfn)
|
||||
walk_pfn(pfn, 1);
|
||||
}
|
||||
assert(start < index);
|
||||
walk_vma(start, index - start);
|
||||
}
|
||||
}
|
||||
|
||||
@ -527,18 +639,14 @@ static void walk_addr_ranges(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
kpageflags_fd = open(PROC_KPAGEFLAGS, O_RDONLY);
|
||||
if (kpageflags_fd < 0) {
|
||||
perror(PROC_KPAGEFLAGS);
|
||||
exit(EXIT_FAILURE);
|
||||
}
|
||||
kpageflags_fd = checked_open(PROC_KPAGEFLAGS, O_RDONLY);
|
||||
|
||||
if (!nr_addr_ranges)
|
||||
add_addr_range(0, ULONG_MAX);
|
||||
|
||||
for (i = 0; i < nr_addr_ranges; i++)
|
||||
if (!opt_pid)
|
||||
walk_pfn(opt_offset[i], opt_size[i]);
|
||||
walk_pfn(0, opt_offset[i], opt_size[i]);
|
||||
else
|
||||
walk_task(opt_offset[i], opt_size[i]);
|
||||
|
||||
@ -575,6 +683,8 @@ static void usage(void)
|
||||
" -l|--list Show page details in ranges\n"
|
||||
" -L|--list-each Show page details one by one\n"
|
||||
" -N|--no-summary Don't show summay info\n"
|
||||
" -X|--hwpoison hwpoison pages\n"
|
||||
" -x|--unpoison unpoison pages\n"
|
||||
" -h|--help Show this usage message\n"
|
||||
"addr-spec:\n"
|
||||
" N one page at offset N (unit: pages)\n"
|
||||
@ -624,11 +734,7 @@ static void parse_pid(const char *str)
|
||||
opt_pid = parse_number(str);
|
||||
|
||||
sprintf(buf, "/proc/%d/pagemap", opt_pid);
|
||||
pagemap_fd = open(buf, O_RDONLY);
|
||||
if (pagemap_fd < 0) {
|
||||
perror(buf);
|
||||
exit(EXIT_FAILURE);
|
||||
}
|
||||
pagemap_fd = checked_open(buf, O_RDONLY);
|
||||
|
||||
sprintf(buf, "/proc/%d/maps", opt_pid);
|
||||
file = fopen(buf, "r");
|
||||
@ -788,6 +894,8 @@ static struct option opts[] = {
|
||||
{ "list" , 0, NULL, 'l' },
|
||||
{ "list-each" , 0, NULL, 'L' },
|
||||
{ "no-summary", 0, NULL, 'N' },
|
||||
{ "hwpoison" , 0, NULL, 'X' },
|
||||
{ "unpoison" , 0, NULL, 'x' },
|
||||
{ "help" , 0, NULL, 'h' },
|
||||
{ NULL , 0, NULL, 0 }
|
||||
};
|
||||
@ -799,7 +907,7 @@ int main(int argc, char *argv[])
|
||||
page_size = getpagesize();
|
||||
|
||||
while ((c = getopt_long(argc, argv,
|
||||
"rp:f:a:b:lLNh", opts, NULL)) != -1) {
|
||||
"rp:f:a:b:lLNXxh", opts, NULL)) != -1) {
|
||||
switch (c) {
|
||||
case 'r':
|
||||
opt_raw = 1;
|
||||
@ -825,6 +933,14 @@ int main(int argc, char *argv[])
|
||||
case 'N':
|
||||
opt_no_summary = 1;
|
||||
break;
|
||||
case 'X':
|
||||
opt_hwpoison = 1;
|
||||
prepare_hwpoison_fd();
|
||||
break;
|
||||
case 'x':
|
||||
opt_unpoison = 1;
|
||||
prepare_hwpoison_fd();
|
||||
break;
|
||||
case 'h':
|
||||
usage();
|
||||
exit(0);
|
||||
@ -844,7 +960,7 @@ int main(int argc, char *argv[])
|
||||
walk_addr_ranges();
|
||||
|
||||
if (opt_list == 1)
|
||||
show_page_range(0, 0); /* drain the buffer */
|
||||
show_page_range(0, 0, 0); /* drain the buffer */
|
||||
|
||||
if (opt_no_summary)
|
||||
return 0;
|
||||
|
@ -57,7 +57,9 @@ There are three components to pagemap:
|
||||
16. COMPOUND_TAIL
|
||||
16. HUGE
|
||||
18. UNEVICTABLE
|
||||
19. HWPOISON
|
||||
20. NOPAGE
|
||||
21. KSM
|
||||
|
||||
Short descriptions to the page flags:
|
||||
|
||||
@ -86,9 +88,15 @@ Short descriptions to the page flags:
|
||||
17. HUGE
|
||||
this is an integral part of a HugeTLB page
|
||||
|
||||
19. HWPOISON
|
||||
hardware detected memory corruption on this page: don't touch the data!
|
||||
|
||||
20. NOPAGE
|
||||
no page frame exists at the requested address
|
||||
|
||||
21. KSM
|
||||
identical memory pages dynamically shared between one or more processes
|
||||
|
||||
[IO related page flags]
|
||||
1. ERROR IO error occurred
|
||||
3. UPTODATE page has up-to-date data
|
||||
|
@ -24,8 +24,8 @@ General Remarks
|
||||
|
||||
Valid addresses are 0x18, 0x19, 0x1a, and 0x1b.
|
||||
However, the device cannot be detected without writing to the i2c bus, so no
|
||||
detection is done.
|
||||
You should force the device address.
|
||||
detection is done. You should instantiate the device explicitly.
|
||||
|
||||
$ modprobe ds2482 force=0,0x18
|
||||
$ modprobe ds2482
|
||||
$ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device
|
||||
|
||||
|
82
MAINTAINERS
82
MAINTAINERS
@ -257,6 +257,13 @@ W: http://www.lesswatts.org/projects/acpi/
|
||||
S: Supported
|
||||
F: drivers/acpi/fan.c
|
||||
|
||||
ACPI PROCESSOR AGGREGATOR DRIVER
|
||||
M: Shaohua Li <shaohua.li@intel.com>
|
||||
L: linux-acpi@vger.kernel.org
|
||||
W: http://www.lesswatts.org/projects/acpi/
|
||||
S: Supported
|
||||
F: drivers/acpi/acpi_pad.c
|
||||
|
||||
ACPI THERMAL DRIVER
|
||||
M: Zhang Rui <rui.zhang@intel.com>
|
||||
L: linux-acpi@vger.kernel.org
|
||||
@ -570,6 +577,11 @@ M: Mike Rapoport <mike@compulab.co.il>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
|
||||
ARM/CONTEC MICRO9 MACHINE SUPPORT
|
||||
M: Hubert Feurstein <hubert.feurstein@contec.at>
|
||||
S: Maintained
|
||||
F: arch/arm/mach-ep93xx/micro9.c
|
||||
|
||||
ARM/CORGI MACHINE SUPPORT
|
||||
M: Richard Purdie <rpurdie@rpsys.net>
|
||||
S: Maintained
|
||||
@ -646,24 +658,24 @@ ARM/INTEL IOP32X ARM ARCHITECTURE
|
||||
M: Lennert Buytenhek <kernel@wantstofly.org>
|
||||
M: Dan Williams <dan.j.williams@intel.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Supported
|
||||
S: Maintained
|
||||
|
||||
ARM/INTEL IOP33X ARM ARCHITECTURE
|
||||
M: Dan Williams <dan.j.williams@intel.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Supported
|
||||
S: Maintained
|
||||
|
||||
ARM/INTEL IOP13XX ARM ARCHITECTURE
|
||||
M: Lennert Buytenhek <kernel@wantstofly.org>
|
||||
M: Dan Williams <dan.j.williams@intel.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Supported
|
||||
S: Maintained
|
||||
|
||||
ARM/INTEL IQ81342EX MACHINE SUPPORT
|
||||
M: Lennert Buytenhek <kernel@wantstofly.org>
|
||||
M: Dan Williams <dan.j.williams@intel.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Supported
|
||||
S: Maintained
|
||||
|
||||
ARM/INTEL IXP2000 ARM ARCHITECTURE
|
||||
M: Lennert Buytenhek <kernel@wantstofly.org>
|
||||
@ -691,7 +703,7 @@ ARM/INTEL XSC3 (MANZANO) ARM CORE
|
||||
M: Lennert Buytenhek <kernel@wantstofly.org>
|
||||
M: Dan Williams <dan.j.williams@intel.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Supported
|
||||
S: Maintained
|
||||
|
||||
ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
|
||||
M: Lennert Buytenhek <kernel@wantstofly.org>
|
||||
@ -741,23 +753,36 @@ M: Dirk Opfer <dirk@opfer-online.de>
|
||||
S: Maintained
|
||||
|
||||
ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
|
||||
P: Marek Vasut
|
||||
M: marek.vasut@gmail.com
|
||||
M: Marek Vasut <marek.vasut@gmail.com>
|
||||
L: linux-arm-kernel@lists.infradead.org
|
||||
W: http://hackndev.com
|
||||
S: Maintained
|
||||
F: arch/arm/mach-pxa/include/mach/palmtx.h
|
||||
F: arch/arm/mach-pxa/palmtx.c
|
||||
F: arch/arm/mach-pxa/include/mach/palmt5.h
|
||||
F: arch/arm/mach-pxa/palmt5.c
|
||||
F: arch/arm/mach-pxa/include/mach/palmld.h
|
||||
F: arch/arm/mach-pxa/palmld.c
|
||||
F: arch/arm/mach-pxa/include/mach/palmte2.h
|
||||
F: arch/arm/mach-pxa/palmte2.c
|
||||
F: arch/arm/mach-pxa/include/mach/palmtc.h
|
||||
F: arch/arm/mach-pxa/palmtc.c
|
||||
|
||||
ARM/PALM TREO 680 SUPPORT
|
||||
M: Tomas Cech <sleep_walker@suse.cz>
|
||||
L: linux-arm-kernel@lists.infradead.org
|
||||
W: http://hackndev.com
|
||||
S: Maintained
|
||||
F: arch/arm/mach-pxa/include/mach/treo680.h
|
||||
F: arch/arm/mach-pxa/treo680.c
|
||||
|
||||
ARM/PALMZ72 SUPPORT
|
||||
M: Sergey Lapin <slapin@ossfans.org>
|
||||
L: linux-arm-kernel@lists.infradead.org
|
||||
W: http://hackndev.com
|
||||
S: Maintained
|
||||
F: arch/arm/mach-pxa/include/mach/palmz72.h
|
||||
F: arch/arm/mach-pxa/palmz72.c
|
||||
|
||||
ARM/PLEB SUPPORT
|
||||
M: Peter Chubb <pleb@gelato.unsw.edu.au>
|
||||
@ -1211,6 +1236,13 @@ L: netdev@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/net/tg3.*
|
||||
|
||||
BROCADE BFA FC SCSI DRIVER
|
||||
P: Jing Huang
|
||||
M: huangj@brocade.com
|
||||
L: linux-scsi@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/scsi/bfa/
|
||||
|
||||
BSG (block layer generic sg v4 driver)
|
||||
M: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
|
||||
L: linux-scsi@vger.kernel.org
|
||||
@ -2038,7 +2070,7 @@ S: Maintained
|
||||
F: fs/*
|
||||
|
||||
FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
|
||||
M: Riku Voipio <riku.vipio@iki.fi>
|
||||
M: Riku Voipio <riku.voipio@iki.fi>
|
||||
L: lm-sensors@lm-sensors.org
|
||||
S: Maintained
|
||||
F: drivers/hwmon/f75375s.c
|
||||
@ -2583,6 +2615,7 @@ L: linux1394-devel@lists.sourceforge.net
|
||||
W: http://www.linux1394.org/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
|
||||
S: Maintained
|
||||
F: Documentation/debugging-via-ohci1394.txt
|
||||
F: drivers/ieee1394/
|
||||
|
||||
IEEE 1394 RAW I/O DRIVER
|
||||
@ -2682,7 +2715,7 @@ F: include/linux/intel-iommu.h
|
||||
|
||||
INTEL IOP-ADMA DMA DRIVER
|
||||
M: Dan Williams <dan.j.williams@intel.com>
|
||||
S: Supported
|
||||
S: Maintained
|
||||
F: drivers/dma/iop-adma.c
|
||||
|
||||
INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
|
||||
@ -3623,10 +3656,18 @@ F: Documentation/blockdev/nbd.txt
|
||||
F: drivers/block/nbd.c
|
||||
F: include/linux/nbd.h
|
||||
|
||||
NETWORK DROP MONITOR
|
||||
M: Neil Horman <nhorman@tuxdriver.com>
|
||||
L: netdev@vger.kernel.org
|
||||
S: Maintained
|
||||
W: https://fedorahosted.org/dropwatch/
|
||||
F: net/core/drop_monitor.c
|
||||
|
||||
NETWORKING [GENERAL]
|
||||
M: "David S. Miller" <davem@davemloft.net>
|
||||
L: netdev@vger.kernel.org
|
||||
W: http://www.linuxfoundation.org/en/Net
|
||||
W: http://patchwork.ozlabs.org/project/netdev/list/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
|
||||
S: Maintained
|
||||
F: net/
|
||||
@ -3953,6 +3994,7 @@ F: drivers/block/paride/
|
||||
PARISC ARCHITECTURE
|
||||
M: Kyle McMartin <kyle@mcmartin.ca>
|
||||
M: Helge Deller <deller@gmx.de>
|
||||
M: "James E.J. Bottomley" <jejb@parisc-linux.org>
|
||||
L: linux-parisc@vger.kernel.org
|
||||
W: http://www.parisc-linux.org/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
|
||||
@ -4036,6 +4078,13 @@ M: Peter Zijlstra <a.p.zijlstra@chello.nl>
|
||||
M: Paul Mackerras <paulus@samba.org>
|
||||
M: Ingo Molnar <mingo@elte.hu>
|
||||
S: Supported
|
||||
F: kernel/perf_event.c
|
||||
F: include/linux/perf_event.h
|
||||
F: arch/*/*/kernel/perf_event.c
|
||||
F: arch/*/include/asm/perf_event.h
|
||||
F: arch/*/lib/perf_event.c
|
||||
F: arch/*/kernel/perf_callchain.c
|
||||
F: tools/perf/
|
||||
|
||||
PERSONALITY HANDLING
|
||||
M: Christoph Hellwig <hch@infradead.org>
|
||||
@ -4618,6 +4667,14 @@ F: drivers/ata/
|
||||
F: include/linux/ata.h
|
||||
F: include/linux/libata.h
|
||||
|
||||
SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
|
||||
P: Jayamohan Kallickal
|
||||
M: jayamohank@serverengines.com
|
||||
L: linux-scsi@vger.kernel.org
|
||||
W: http://www.serverengines.com
|
||||
S: Supported
|
||||
F: drivers/scsi/be2iscsi/
|
||||
|
||||
SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
|
||||
M: Sathya Perla <sathyap@serverengines.com>
|
||||
M: Subbu Seetharaman <subbus@serverengines.com>
|
||||
@ -5608,6 +5665,13 @@ S: Maintained
|
||||
F: drivers/vlynq/vlynq.c
|
||||
F: include/linux/vlynq.h
|
||||
|
||||
VMWARE VMXNET3 ETHERNET DRIVER
|
||||
M: Shreyas Bhatewara <sbhatewara@vmware.com>
|
||||
M: VMware, Inc. <pv-drivers@vmware.com>
|
||||
L: netdev@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/net/vmxnet3/
|
||||
|
||||
VOLTAGE AND CURRENT REGULATOR FRAMEWORK
|
||||
M: Liam Girdwood <lrg@slimlogic.co.uk>
|
||||
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
||||
|
48
Makefile
48
Makefile
@ -1,7 +1,7 @@
|
||||
VERSION = 2
|
||||
PATCHLEVEL = 6
|
||||
SUBLEVEL = 32
|
||||
EXTRAVERSION = -rc2
|
||||
EXTRAVERSION = -rc5
|
||||
NAME = Man-Eating Seals of Antiquity
|
||||
|
||||
# *DOCUMENTATION*
|
||||
@ -179,46 +179,9 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
|
||||
# Alternatively CROSS_COMPILE can be set in the environment.
|
||||
# Default value for CROSS_COMPILE is not to prefix executables
|
||||
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
|
||||
#
|
||||
# To force ARCH and CROSS_COMPILE settings include kernel.* files
|
||||
# in the kernel tree - do not patch this file.
|
||||
export KBUILD_BUILDHOST := $(SUBARCH)
|
||||
|
||||
# Kbuild save the ARCH and CROSS_COMPILE setting in kernel.* files.
|
||||
# Restore these settings and check that user did not specify
|
||||
# conflicting values.
|
||||
|
||||
saved_arch := $(shell cat include/generated/kernel.arch 2> /dev/null)
|
||||
saved_cross := $(shell cat include/generated/kernel.cross 2> /dev/null)
|
||||
|
||||
ifneq ($(CROSS_COMPILE),)
|
||||
ifneq ($(saved_cross),)
|
||||
ifneq ($(CROSS_COMPILE),$(saved_cross))
|
||||
$(error CROSS_COMPILE changed from \
|
||||
"$(saved_cross)" to \
|
||||
to "$(CROSS_COMPILE)". \
|
||||
Use "make mrproper" to fix it up)
|
||||
endif
|
||||
endif
|
||||
else
|
||||
CROSS_COMPILE := $(saved_cross)
|
||||
endif
|
||||
|
||||
ifneq ($(ARCH),)
|
||||
ifneq ($(saved_arch),)
|
||||
ifneq ($(saved_arch),$(ARCH))
|
||||
$(error ARCH changed from \
|
||||
"$(saved_arch)" to "$(ARCH)". \
|
||||
Use "make mrproper" to fix it up)
|
||||
endif
|
||||
endif
|
||||
else
|
||||
ifneq ($(saved_arch),)
|
||||
ARCH := $(saved_arch)
|
||||
else
|
||||
ARCH := $(SUBARCH)
|
||||
endif
|
||||
endif
|
||||
ARCH ?= $(SUBARCH)
|
||||
CROSS_COMPILE ?=
|
||||
|
||||
# Architecture as present in compile.h
|
||||
UTS_MACHINE := $(ARCH)
|
||||
@ -483,11 +446,6 @@ ifeq ($(config-targets),1)
|
||||
include $(srctree)/arch/$(SRCARCH)/Makefile
|
||||
export KBUILD_DEFCONFIG KBUILD_KCONFIG
|
||||
|
||||
# save ARCH & CROSS_COMPILE settings
|
||||
$(shell mkdir -p include/generated && \
|
||||
echo $(ARCH) > include/generated/kernel.arch && \
|
||||
echo $(CROSS_COMPILE) > include/generated/kernel.cross)
|
||||
|
||||
config: scripts_basic outputmakefile FORCE
|
||||
$(Q)mkdir -p include/linux include/config
|
||||
$(Q)$(MAKE) $(build)=scripts/kconfig $@
|
||||
|
@ -1032,6 +1032,7 @@ unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
|
||||
|
||||
return __sa1111_pll_clock(sachip);
|
||||
}
|
||||
EXPORT_SYMBOL(sa1111_pll_clock);
|
||||
|
||||
/**
|
||||
* sa1111_select_audio_mode - select I2S or AC link mode
|
||||
@ -1059,6 +1060,7 @@ void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
|
||||
|
||||
spin_unlock_irqrestore(&sachip->lock, flags);
|
||||
}
|
||||
EXPORT_SYMBOL(sa1111_select_audio_mode);
|
||||
|
||||
/**
|
||||
* sa1111_set_audio_rate - set the audio sample rate
|
||||
@ -1083,6 +1085,7 @@ int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(sa1111_set_audio_rate);
|
||||
|
||||
/**
|
||||
* sa1111_get_audio_rate - get the audio sample rate
|
||||
@ -1100,6 +1103,7 @@ int sa1111_get_audio_rate(struct sa1111_dev *sadev)
|
||||
|
||||
return __sa1111_pll_clock(sachip) / (256 * div);
|
||||
}
|
||||
EXPORT_SYMBOL(sa1111_get_audio_rate);
|
||||
|
||||
void sa1111_set_io_dir(struct sa1111_dev *sadev,
|
||||
unsigned int bits, unsigned int dir,
|
||||
@ -1128,6 +1132,7 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev,
|
||||
MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
|
||||
spin_unlock_irqrestore(&sachip->lock, flags);
|
||||
}
|
||||
EXPORT_SYMBOL(sa1111_set_io_dir);
|
||||
|
||||
void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
|
||||
{
|
||||
@ -1142,6 +1147,7 @@ void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
|
||||
MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
|
||||
spin_unlock_irqrestore(&sachip->lock, flags);
|
||||
}
|
||||
EXPORT_SYMBOL(sa1111_set_io);
|
||||
|
||||
void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
|
||||
{
|
||||
@ -1156,6 +1162,7 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i
|
||||
MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
|
||||
spin_unlock_irqrestore(&sachip->lock, flags);
|
||||
}
|
||||
EXPORT_SYMBOL(sa1111_set_sleep_io);
|
||||
|
||||
/*
|
||||
* Individual device operations.
|
||||
@ -1176,6 +1183,7 @@ void sa1111_enable_device(struct sa1111_dev *sadev)
|
||||
sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
|
||||
spin_unlock_irqrestore(&sachip->lock, flags);
|
||||
}
|
||||
EXPORT_SYMBOL(sa1111_enable_device);
|
||||
|
||||
/**
|
||||
* sa1111_disable_device - disable an on-chip SA1111 function block
|
||||
@ -1192,6 +1200,7 @@ void sa1111_disable_device(struct sa1111_dev *sadev)
|
||||
sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
|
||||
spin_unlock_irqrestore(&sachip->lock, flags);
|
||||
}
|
||||
EXPORT_SYMBOL(sa1111_disable_device);
|
||||
|
||||
/*
|
||||
* SA1111 "Register Access Bus."
|
||||
@ -1259,17 +1268,20 @@ struct bus_type sa1111_bus_type = {
|
||||
.suspend = sa1111_bus_suspend,
|
||||
.resume = sa1111_bus_resume,
|
||||
};
|
||||
EXPORT_SYMBOL(sa1111_bus_type);
|
||||
|
||||
int sa1111_driver_register(struct sa1111_driver *driver)
|
||||
{
|
||||
driver->drv.bus = &sa1111_bus_type;
|
||||
return driver_register(&driver->drv);
|
||||
}
|
||||
EXPORT_SYMBOL(sa1111_driver_register);
|
||||
|
||||
void sa1111_driver_unregister(struct sa1111_driver *driver)
|
||||
{
|
||||
driver_unregister(&driver->drv);
|
||||
}
|
||||
EXPORT_SYMBOL(sa1111_driver_unregister);
|
||||
|
||||
static int __init sa1111_init(void)
|
||||
{
|
||||
@ -1290,16 +1302,3 @@ module_exit(sa1111_exit);
|
||||
|
||||
MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
EXPORT_SYMBOL(sa1111_select_audio_mode);
|
||||
EXPORT_SYMBOL(sa1111_set_audio_rate);
|
||||
EXPORT_SYMBOL(sa1111_get_audio_rate);
|
||||
EXPORT_SYMBOL(sa1111_set_io_dir);
|
||||
EXPORT_SYMBOL(sa1111_set_io);
|
||||
EXPORT_SYMBOL(sa1111_set_sleep_io);
|
||||
EXPORT_SYMBOL(sa1111_enable_device);
|
||||
EXPORT_SYMBOL(sa1111_disable_device);
|
||||
EXPORT_SYMBOL(sa1111_pll_clock);
|
||||
EXPORT_SYMBOL(sa1111_bus_type);
|
||||
EXPORT_SYMBOL(sa1111_driver_register);
|
||||
EXPORT_SYMBOL(sa1111_driver_unregister);
|
||||
|
@ -90,7 +90,6 @@ CONFIG_ARCH_SA1100=y
|
||||
# CONFIG_SA1100_COLLIE is not set
|
||||
# CONFIG_SA1100_H3100 is not set
|
||||
CONFIG_SA1100_H3600=y
|
||||
CONFIG_SA1100_H3XXX=y
|
||||
# CONFIG_SA1100_BADGE4 is not set
|
||||
# CONFIG_SA1100_JORNADA720 is not set
|
||||
# CONFIG_SA1100_HACKKIT is not set
|
||||
|
File diff suppressed because it is too large
Load Diff
@ -969,7 +969,6 @@ CONFIG_USB_ETH_RNDIS=y
|
||||
#
|
||||
CONFIG_USB_OTG_UTILS=y
|
||||
# CONFIG_USB_GPIO_VBUS is not set
|
||||
# CONFIG_ISP1301_OMAP is not set
|
||||
CONFIG_TWL4030_USB=y
|
||||
# CONFIG_NOP_USB_XCEIV is not set
|
||||
CONFIG_MMC=y
|
||||
|
@ -84,7 +84,7 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
|
||||
*p = res | mask;
|
||||
raw_local_irq_restore(flags);
|
||||
|
||||
return res & mask;
|
||||
return (res & mask) != 0;
|
||||
}
|
||||
|
||||
static inline int
|
||||
@ -101,7 +101,7 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
|
||||
*p = res & ~mask;
|
||||
raw_local_irq_restore(flags);
|
||||
|
||||
return res & mask;
|
||||
return (res & mask) != 0;
|
||||
}
|
||||
|
||||
static inline int
|
||||
@ -118,7 +118,7 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
|
||||
*p = res ^ mask;
|
||||
raw_local_irq_restore(flags);
|
||||
|
||||
return res & mask;
|
||||
return (res & mask) != 0;
|
||||
}
|
||||
|
||||
#include <asm-generic/bitops/non-atomic.h>
|
||||
|
@ -120,25 +120,39 @@
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Prefetch abort handler. If the CPU has an IFAR use that, otherwise
|
||||
* use the address of the aborted instruction
|
||||
* Prefetch Abort Model
|
||||
* ================
|
||||
*
|
||||
* We have the following to choose from:
|
||||
* legacy - no IFSR, no IFAR
|
||||
* v6 - ARMv6: IFSR, no IFAR
|
||||
* v7 - ARMv7: IFSR and IFAR
|
||||
*/
|
||||
|
||||
#undef CPU_PABORT_HANDLER
|
||||
#undef MULTI_PABORT
|
||||
|
||||
#ifdef CONFIG_CPU_PABRT_IFAR
|
||||
#ifdef CONFIG_CPU_PABRT_LEGACY
|
||||
# ifdef CPU_PABORT_HANDLER
|
||||
# define MULTI_PABORT 1
|
||||
# else
|
||||
# define CPU_PABORT_HANDLER(reg, insn) mrc p15, 0, reg, cr6, cr0, 2
|
||||
# define CPU_PABORT_HANDLER legacy_pabort
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_CPU_PABRT_NOIFAR
|
||||
#ifdef CONFIG_CPU_PABRT_V6
|
||||
# ifdef CPU_PABORT_HANDLER
|
||||
# define MULTI_PABORT 1
|
||||
# else
|
||||
# define CPU_PABORT_HANDLER(reg, insn) mov reg, insn
|
||||
# define CPU_PABORT_HANDLER v6_pabort
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_CPU_PABRT_V7
|
||||
# ifdef CPU_PABORT_HANDLER
|
||||
# define MULTI_PABORT 1
|
||||
# else
|
||||
# define CPU_PABORT_HANDLER v7_pabort
|
||||
# endif
|
||||
#endif
|
||||
|
||||
|
@ -215,6 +215,7 @@ extern int iop3xx_get_init_atu(void);
|
||||
* IOP3XX I/O and Mem space regions for PCI autoconfiguration
|
||||
*/
|
||||
#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000
|
||||
#define IOP3XX_PCI_MEM_WINDOW_SIZE 0x08000000
|
||||
|
||||
#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000
|
||||
#define IOP3XX_PCI_LOWER_IO_PA 0x90000000
|
||||
|
16
arch/arm/include/asm/smp_plat.h
Normal file
16
arch/arm/include/asm/smp_plat.h
Normal file
@ -0,0 +1,16 @@
|
||||
/*
|
||||
* ARM specific SMP header, this contains our implementation
|
||||
* details.
|
||||
*/
|
||||
#ifndef __ASMARM_SMP_PLAT_H
|
||||
#define __ASMARM_SMP_PLAT_H
|
||||
|
||||
#include <asm/cputype.h>
|
||||
|
||||
/* all SMP configurations have the extended CPUID registers */
|
||||
static inline int tlb_ops_need_broadcast(void)
|
||||
{
|
||||
return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
|
||||
}
|
||||
|
||||
#endif
|
@ -456,6 +456,7 @@
|
||||
* Unimplemented (or alternatively implemented) syscalls
|
||||
*/
|
||||
#define __IGNORE_fadvise64_64 1
|
||||
#define __IGNORE_migrate_pages 1
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
#endif /* __ASM_ARM_UNISTD_H */
|
||||
|
@ -311,22 +311,16 @@ __pabt_svc:
|
||||
tst r3, #PSR_I_BIT
|
||||
biceq r9, r9, #PSR_I_BIT
|
||||
|
||||
@
|
||||
@ set args, then call main handler
|
||||
@
|
||||
@ r0 - address of faulting instruction
|
||||
@ r1 - pointer to registers on stack
|
||||
@
|
||||
#ifdef MULTI_PABORT
|
||||
mov r0, r2 @ pass address of aborted instruction.
|
||||
#ifdef MULTI_PABORT
|
||||
ldr r4, .LCprocfns
|
||||
mov lr, pc
|
||||
ldr pc, [r4, #PROCESSOR_PABT_FUNC]
|
||||
#else
|
||||
CPU_PABORT_HANDLER(r0, r2)
|
||||
bl CPU_PABORT_HANDLER
|
||||
#endif
|
||||
msr cpsr_c, r9 @ Maybe enable interrupts
|
||||
mov r1, sp @ regs
|
||||
mov r2, sp @ regs
|
||||
bl do_PrefetchAbort @ call abort handler
|
||||
|
||||
@
|
||||
@ -701,16 +695,16 @@ ENDPROC(__und_usr_unknown)
|
||||
__pabt_usr:
|
||||
usr_entry
|
||||
|
||||
#ifdef MULTI_PABORT
|
||||
mov r0, r2 @ pass address of aborted instruction.
|
||||
#ifdef MULTI_PABORT
|
||||
ldr r4, .LCprocfns
|
||||
mov lr, pc
|
||||
ldr pc, [r4, #PROCESSOR_PABT_FUNC]
|
||||
#else
|
||||
CPU_PABORT_HANDLER(r0, r2)
|
||||
bl CPU_PABORT_HANDLER
|
||||
#endif
|
||||
enable_irq @ Enable interrupts
|
||||
mov r1, sp @ regs
|
||||
mov r2, sp @ regs
|
||||
bl do_PrefetchAbort @ call abort handler
|
||||
UNWIND(.fnend )
|
||||
/* fall through */
|
||||
|
@ -126,7 +126,7 @@ ENTRY(__gnu_mcount_nc)
|
||||
cmp r0, r2
|
||||
bne gnu_trace
|
||||
ldmia sp!, {r0-r3, ip, lr}
|
||||
bx ip
|
||||
mov pc, ip
|
||||
|
||||
gnu_trace:
|
||||
ldr r1, [sp, #20] @ lr of instrumented routine
|
||||
@ -135,7 +135,7 @@ gnu_trace:
|
||||
mov lr, pc
|
||||
mov pc, r2
|
||||
ldmia sp!, {r0-r3, ip, lr}
|
||||
bx ip
|
||||
mov pc, ip
|
||||
|
||||
ENTRY(mcount)
|
||||
stmdb sp!, {r0-r3, lr}
|
||||
@ -425,13 +425,6 @@ sys_mmap2:
|
||||
#endif
|
||||
ENDPROC(sys_mmap2)
|
||||
|
||||
ENTRY(pabort_ifar)
|
||||
mrc p15, 0, r0, cr6, cr0, 2
|
||||
ENTRY(pabort_noifar)
|
||||
mov pc, lr
|
||||
ENDPROC(pabort_ifar)
|
||||
ENDPROC(pabort_noifar)
|
||||
|
||||
#ifdef CONFIG_OABI_COMPAT
|
||||
|
||||
/*
|
||||
|
@ -13,6 +13,7 @@
|
||||
|
||||
#define ATAG_CORE 0x54410001
|
||||
#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
|
||||
#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
|
||||
|
||||
.align 2
|
||||
.type __switch_data, %object
|
||||
@ -251,7 +252,8 @@ __vet_atags:
|
||||
bne 1f
|
||||
|
||||
ldr r5, [r2, #0] @ is first tag ATAG_CORE?
|
||||
subs r5, r5, #ATAG_CORE_SIZE
|
||||
cmp r5, #ATAG_CORE_SIZE
|
||||
cmpne r5, #ATAG_CORE_SIZE_EMPTY
|
||||
bne 1f
|
||||
ldr r5, [r2, #4]
|
||||
ldr r6, =ATAG_CORE
|
||||
|
@ -36,6 +36,7 @@
|
||||
#include <asm/tlbflush.h>
|
||||
#include <asm/ptrace.h>
|
||||
#include <asm/localtimer.h>
|
||||
#include <asm/smp_plat.h>
|
||||
|
||||
/*
|
||||
* as from 2.5, kernels no longer have an init_tasks structure
|
||||
@ -153,7 +154,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
|
||||
/*
|
||||
* __cpu_disable runs on the processor to be shutdown.
|
||||
*/
|
||||
int __cpuexit __cpu_disable(void)
|
||||
int __cpu_disable(void)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
struct task_struct *p;
|
||||
@ -200,7 +201,7 @@ int __cpuexit __cpu_disable(void)
|
||||
* called on the thread which is asking for a CPU to be shutdown -
|
||||
* waits until shutdown has completed, or it is timed out.
|
||||
*/
|
||||
void __cpuexit __cpu_die(unsigned int cpu)
|
||||
void __cpu_die(unsigned int cpu)
|
||||
{
|
||||
if (!platform_cpu_kill(cpu))
|
||||
printk("CPU%u: unable to kill\n", cpu);
|
||||
@ -214,7 +215,7 @@ void __cpuexit __cpu_die(unsigned int cpu)
|
||||
* of the other hotplug-cpu capable cores, so presumably coming
|
||||
* out of idle fixes this.
|
||||
*/
|
||||
void __cpuexit cpu_die(void)
|
||||
void __ref cpu_die(void)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
|
||||
@ -586,12 +587,6 @@ struct tlb_args {
|
||||
unsigned long ta_end;
|
||||
};
|
||||
|
||||
/* all SMP configurations have the extended CPUID registers */
|
||||
static inline int tlb_ops_need_broadcast(void)
|
||||
{
|
||||
return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
|
||||
}
|
||||
|
||||
static inline void ipi_flush_tlb_all(void *ignored)
|
||||
{
|
||||
local_flush_tlb_all();
|
||||
|
@ -166,10 +166,12 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
|
||||
clockevents_register_device(clk);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_HOTPLUG_CPU
|
||||
/*
|
||||
* take a local timer down
|
||||
*/
|
||||
void __cpuexit twd_timer_stop(void)
|
||||
void twd_timer_stop(void)
|
||||
{
|
||||
__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
|
||||
}
|
||||
#endif
|
||||
|
@ -21,6 +21,7 @@
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/time.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/smp.h>
|
||||
#include <linux/timex.h>
|
||||
#include <linux/errno.h>
|
||||
|
@ -45,21 +45,21 @@ static int __init user_debug_setup(char *str)
|
||||
__setup("user_debug=", user_debug_setup);
|
||||
#endif
|
||||
|
||||
static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
|
||||
static void dump_mem(const char *, const char *, unsigned long, unsigned long);
|
||||
|
||||
void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
|
||||
{
|
||||
#ifdef CONFIG_KALLSYMS
|
||||
printk("[<%08lx>] ", where);
|
||||
print_symbol("(%s) ", where);
|
||||
printk("from [<%08lx>] ", from);
|
||||
print_symbol("(%s)\n", from);
|
||||
char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
|
||||
sprint_symbol(sym1, where);
|
||||
sprint_symbol(sym2, from);
|
||||
printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
|
||||
#else
|
||||
printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
|
||||
#endif
|
||||
|
||||
if (in_exception_text(where))
|
||||
dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
|
||||
dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
|
||||
}
|
||||
|
||||
#ifndef CONFIG_ARM_UNWIND
|
||||
@ -81,9 +81,10 @@ static int verify_stack(unsigned long sp)
|
||||
/*
|
||||
* Dump out the contents of some memory nicely...
|
||||
*/
|
||||
static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
|
||||
static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
|
||||
unsigned long top)
|
||||
{
|
||||
unsigned long p = bottom & ~31;
|
||||
unsigned long first;
|
||||
mm_segment_t fs;
|
||||
int i;
|
||||
|
||||
@ -95,33 +96,37 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
|
||||
fs = get_fs();
|
||||
set_fs(KERNEL_DS);
|
||||
|
||||
printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
|
||||
printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
|
||||
|
||||
for (p = bottom & ~31; p < top;) {
|
||||
printk("%04lx: ", p & 0xffff);
|
||||
for (first = bottom & ~31; first < top; first += 32) {
|
||||
unsigned long p;
|
||||
char str[sizeof(" 12345678") * 8 + 1];
|
||||
|
||||
for (i = 0; i < 8; i++, p += 4) {
|
||||
unsigned int val;
|
||||
memset(str, ' ', sizeof(str));
|
||||
str[sizeof(str) - 1] = '\0';
|
||||
|
||||
if (p < bottom || p >= top)
|
||||
printk(" ");
|
||||
else {
|
||||
__get_user(val, (unsigned long *)p);
|
||||
printk("%08x ", val);
|
||||
for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
|
||||
if (p >= bottom && p < top) {
|
||||
unsigned long val;
|
||||
if (__get_user(val, (unsigned long *)p) == 0)
|
||||
sprintf(str + i * 9, " %08lx", val);
|
||||
else
|
||||
sprintf(str + i * 9, " ????????");
|
||||
}
|
||||
}
|
||||
printk ("\n");
|
||||
printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
|
||||
}
|
||||
|
||||
set_fs(fs);
|
||||
}
|
||||
|
||||
static void dump_instr(struct pt_regs *regs)
|
||||
static void dump_instr(const char *lvl, struct pt_regs *regs)
|
||||
{
|
||||
unsigned long addr = instruction_pointer(regs);
|
||||
const int thumb = thumb_mode(regs);
|
||||
const int width = thumb ? 4 : 8;
|
||||
mm_segment_t fs;
|
||||
char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
|
||||
int i;
|
||||
|
||||
/*
|
||||
@ -132,7 +137,6 @@ static void dump_instr(struct pt_regs *regs)
|
||||
fs = get_fs();
|
||||
set_fs(KERNEL_DS);
|
||||
|
||||
printk("Code: ");
|
||||
for (i = -4; i < 1; i++) {
|
||||
unsigned int val, bad;
|
||||
|
||||
@ -142,13 +146,14 @@ static void dump_instr(struct pt_regs *regs)
|
||||
bad = __get_user(val, &((u32 *)addr)[i]);
|
||||
|
||||
if (!bad)
|
||||
printk(i == 0 ? "(%0*x) " : "%0*x ", width, val);
|
||||
p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
|
||||
width, val);
|
||||
else {
|
||||
printk("bad PC value.");
|
||||
p += sprintf(p, "bad PC value");
|
||||
break;
|
||||
}
|
||||
}
|
||||
printk("\n");
|
||||
printk("%sCode: %s\n", lvl, str);
|
||||
|
||||
set_fs(fs);
|
||||
}
|
||||
@ -224,18 +229,19 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p
|
||||
struct task_struct *tsk = thread->task;
|
||||
static int die_counter;
|
||||
|
||||
printk("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
|
||||
printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
|
||||
str, err, ++die_counter);
|
||||
sysfs_printk_last_file();
|
||||
print_modules();
|
||||
__show_regs(regs);
|
||||
printk("Process %s (pid: %d, stack limit = 0x%p)\n",
|
||||
tsk->comm, task_pid_nr(tsk), thread + 1);
|
||||
printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
|
||||
TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
|
||||
|
||||
if (!user_mode(regs) || in_interrupt()) {
|
||||
dump_mem("Stack: ", regs->ARM_sp,
|
||||
dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
|
||||
THREAD_SIZE + (unsigned long)task_stack_page(tsk));
|
||||
dump_backtrace(regs, tsk);
|
||||
dump_instr(regs);
|
||||
dump_instr(KERN_EMERG, regs);
|
||||
}
|
||||
}
|
||||
|
||||
@ -250,13 +256,14 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
|
||||
|
||||
oops_enter();
|
||||
|
||||
console_verbose();
|
||||
spin_lock_irq(&die_lock);
|
||||
console_verbose();
|
||||
bust_spinlocks(1);
|
||||
__die(str, err, thread, regs);
|
||||
bust_spinlocks(0);
|
||||
add_taint(TAINT_DIE);
|
||||
spin_unlock_irq(&die_lock);
|
||||
oops_exit();
|
||||
|
||||
if (in_interrupt())
|
||||
panic("Fatal exception in interrupt");
|
||||
@ -264,7 +271,6 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
|
||||
if (panic_on_oops)
|
||||
panic("Fatal exception");
|
||||
|
||||
oops_exit();
|
||||
do_exit(SIGSEGV);
|
||||
}
|
||||
|
||||
@ -349,7 +355,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
|
||||
if (user_debug & UDBG_UNDEFINED) {
|
||||
printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
|
||||
current->comm, task_pid_nr(current), pc);
|
||||
dump_instr(regs);
|
||||
dump_instr(KERN_INFO, regs);
|
||||
}
|
||||
#endif
|
||||
|
||||
@ -400,7 +406,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
|
||||
if (user_debug & UDBG_SYSCALL) {
|
||||
printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n",
|
||||
task_pid_nr(current), current->comm, n);
|
||||
dump_instr(regs);
|
||||
dump_instr(KERN_ERR, regs);
|
||||
}
|
||||
#endif
|
||||
|
||||
@ -418,12 +424,14 @@ static int bad_syscall(int n, struct pt_regs *regs)
|
||||
static inline void
|
||||
do_cache_op(unsigned long start, unsigned long end, int flags)
|
||||
{
|
||||
struct mm_struct *mm = current->active_mm;
|
||||
struct vm_area_struct *vma;
|
||||
|
||||
if (end < start || flags)
|
||||
return;
|
||||
|
||||
vma = find_vma(current->active_mm, start);
|
||||
down_read(&mm->mmap_sem);
|
||||
vma = find_vma(mm, start);
|
||||
if (vma && vma->vm_start < end) {
|
||||
if (start < vma->vm_start)
|
||||
start = vma->vm_start;
|
||||
@ -432,6 +440,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
|
||||
|
||||
flush_cache_user_range(vma, start, end);
|
||||
}
|
||||
up_read(&mm->mmap_sem);
|
||||
}
|
||||
|
||||
/*
|
||||
@ -576,7 +585,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
|
||||
if (user_debug & UDBG_SYSCALL) {
|
||||
printk("[%d] %s: arm syscall %d\n",
|
||||
task_pid_nr(current), current->comm, no);
|
||||
dump_instr(regs);
|
||||
dump_instr("", regs);
|
||||
if (user_mode(regs)) {
|
||||
__show_regs(regs);
|
||||
c_backtrace(regs->ARM_fp, processor_mode(regs));
|
||||
@ -653,7 +662,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
|
||||
if (user_debug & UDBG_BADABORT) {
|
||||
printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n",
|
||||
task_pid_nr(current), current->comm, code, instr);
|
||||
dump_instr(regs);
|
||||
dump_instr(KERN_ERR, regs);
|
||||
show_pte(current->mm, addr);
|
||||
}
|
||||
#endif
|
||||
|
@ -31,7 +31,6 @@
|
||||
#include <linux/clocksource.h>
|
||||
#include <linux/clockchips.h>
|
||||
|
||||
#include <linux/amba/bus.h>
|
||||
#include <mach/csp/mm_addr.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/clkdev.h>
|
||||
@ -45,7 +44,6 @@
|
||||
#include <asm/mach/irq.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/mmc.h>
|
||||
|
||||
#include <cfg_global.h>
|
||||
|
||||
@ -273,12 +271,12 @@ static struct irqaction bcmring_timer_irq = {
|
||||
.handler = bcmring_timer_interrupt,
|
||||
};
|
||||
|
||||
static cycle_t bcmring_get_cycles_timer1(void)
|
||||
static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
|
||||
{
|
||||
return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
|
||||
}
|
||||
|
||||
static cycle_t bcmring_get_cycles_timer3(void)
|
||||
static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
|
||||
{
|
||||
return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
|
||||
}
|
||||
|
@ -29,7 +29,7 @@ static inline void arch_idle(void)
|
||||
cpu_do_idle();
|
||||
}
|
||||
|
||||
static inline void arch_reset(char mode, char *cmd)
|
||||
static inline void arch_reset(char mode, const char *cmd)
|
||||
{
|
||||
printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
|
||||
|
||||
|
@ -35,7 +35,6 @@
|
||||
#include <mach/common.h>
|
||||
#include <mach/i2c.h>
|
||||
#include <mach/serial.h>
|
||||
#include <mach/common.h>
|
||||
#include <mach/mmc.h>
|
||||
#include <mach/nand.h>
|
||||
|
||||
|
@ -17,13 +17,31 @@ config EP93XX_SDCE3_SYNC_PHYS_OFFSET
|
||||
bool "0x00000000 - SDCE3/SyncBoot"
|
||||
help
|
||||
Select this option if you want support for EP93xx boards with the
|
||||
first SDRAM bank at 0x00000000
|
||||
first SDRAM bank at 0x00000000.
|
||||
|
||||
config EP93XX_SDCE0_PHYS_OFFSET
|
||||
bool "0xc0000000 - SDCEO"
|
||||
help
|
||||
Select this option if you want support for EP93xx boards with the
|
||||
first SDRAM bank at 0xc0000000
|
||||
first SDRAM bank at 0xc0000000.
|
||||
|
||||
config EP93XX_SDCE1_PHYS_OFFSET
|
||||
bool "0xd0000000 - SDCE1"
|
||||
help
|
||||
Select this option if you want support for EP93xx boards with the
|
||||
first SDRAM bank at 0xd0000000.
|
||||
|
||||
config EP93XX_SDCE2_PHYS_OFFSET
|
||||
bool "0xe0000000 - SDCE2"
|
||||
help
|
||||
Select this option if you want support for EP93xx boards with the
|
||||
first SDRAM bank at 0xe0000000.
|
||||
|
||||
config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
|
||||
bool "0xf0000000 - SDCE3/AsyncBoot"
|
||||
help
|
||||
Select this option if you want support for EP93xx boards with the
|
||||
first SDRAM bank at 0xf0000000.
|
||||
|
||||
endchoice
|
||||
|
||||
@ -112,28 +130,36 @@ config MACH_MICRO9
|
||||
bool
|
||||
|
||||
config MACH_MICRO9H
|
||||
bool "Support Contec Hypercontrol Micro9-H"
|
||||
bool "Support Contec Micro9-High"
|
||||
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
|
||||
select MACH_MICRO9
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Contec Hypercontrol Micro9-H board.
|
||||
Contec Micro9-High board.
|
||||
|
||||
config MACH_MICRO9M
|
||||
bool "Support Contec Hypercontrol Micro9-M"
|
||||
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
|
||||
bool "Support Contec Micro9-Mid"
|
||||
depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
|
||||
select MACH_MICRO9
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Contec Hypercontrol Micro9-M board.
|
||||
Contec Micro9-Mid board.
|
||||
|
||||
config MACH_MICRO9L
|
||||
bool "Support Contec Hypercontrol Micro9-L"
|
||||
bool "Support Contec Micro9-Lite"
|
||||
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
|
||||
select MACH_MICRO9
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Contec Hypercontrol Micro9-L board.
|
||||
Contec Micro9-Lite board.
|
||||
|
||||
config MACH_MICRO9S
|
||||
bool "Support Contec Micro9-Slim"
|
||||
depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
|
||||
select MACH_MICRO9
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Contec Micro9-Slim board.
|
||||
|
||||
config MACH_TS72XX
|
||||
bool "Support Technologic Systems TS-72xx SBC"
|
||||
|
@ -3,3 +3,12 @@ params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100
|
||||
|
||||
zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000
|
||||
params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100
|
||||
|
||||
zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0008000
|
||||
params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100
|
||||
|
||||
zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0008000
|
||||
params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100
|
||||
|
||||
zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0008000
|
||||
params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100
|
||||
|
@ -16,13 +16,16 @@
|
||||
#include <linux/module.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/spinlock.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
|
||||
#include <asm/clkdev.h>
|
||||
#include <asm/div64.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
|
||||
struct clk {
|
||||
struct clk *parent;
|
||||
unsigned long rate;
|
||||
int users;
|
||||
int sw_locked;
|
||||
@ -39,40 +42,60 @@ static unsigned long get_uart_rate(struct clk *clk);
|
||||
static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
|
||||
static int set_div_rate(struct clk *clk, unsigned long rate);
|
||||
|
||||
|
||||
static struct clk clk_xtali = {
|
||||
.rate = EP93XX_EXT_CLK_RATE,
|
||||
};
|
||||
static struct clk clk_uart1 = {
|
||||
.parent = &clk_xtali,
|
||||
.sw_locked = 1,
|
||||
.enable_reg = EP93XX_SYSCON_DEVCFG,
|
||||
.enable_mask = EP93XX_SYSCON_DEVCFG_U1EN,
|
||||
.get_rate = get_uart_rate,
|
||||
};
|
||||
static struct clk clk_uart2 = {
|
||||
.parent = &clk_xtali,
|
||||
.sw_locked = 1,
|
||||
.enable_reg = EP93XX_SYSCON_DEVCFG,
|
||||
.enable_mask = EP93XX_SYSCON_DEVCFG_U2EN,
|
||||
.get_rate = get_uart_rate,
|
||||
};
|
||||
static struct clk clk_uart3 = {
|
||||
.parent = &clk_xtali,
|
||||
.sw_locked = 1,
|
||||
.enable_reg = EP93XX_SYSCON_DEVCFG,
|
||||
.enable_mask = EP93XX_SYSCON_DEVCFG_U3EN,
|
||||
.get_rate = get_uart_rate,
|
||||
};
|
||||
static struct clk clk_pll1;
|
||||
static struct clk clk_f;
|
||||
static struct clk clk_h;
|
||||
static struct clk clk_p;
|
||||
static struct clk clk_pll2;
|
||||
static struct clk clk_pll1 = {
|
||||
.parent = &clk_xtali,
|
||||
};
|
||||
static struct clk clk_f = {
|
||||
.parent = &clk_pll1,
|
||||
};
|
||||
static struct clk clk_h = {
|
||||
.parent = &clk_pll1,
|
||||
};
|
||||
static struct clk clk_p = {
|
||||
.parent = &clk_pll1,
|
||||
};
|
||||
static struct clk clk_pll2 = {
|
||||
.parent = &clk_xtali,
|
||||
};
|
||||
static struct clk clk_usb_host = {
|
||||
.parent = &clk_pll2,
|
||||
.enable_reg = EP93XX_SYSCON_PWRCNT,
|
||||
.enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN,
|
||||
};
|
||||
static struct clk clk_keypad = {
|
||||
.parent = &clk_xtali,
|
||||
.sw_locked = 1,
|
||||
.enable_reg = EP93XX_SYSCON_KEYTCHCLKDIV,
|
||||
.enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
|
||||
.set_rate = set_keytchclk_rate,
|
||||
};
|
||||
static struct clk clk_pwm = {
|
||||
.parent = &clk_xtali,
|
||||
.rate = EP93XX_EXT_CLK_RATE,
|
||||
};
|
||||
|
||||
@ -85,50 +108,62 @@ static struct clk clk_video = {
|
||||
|
||||
/* DMA Clocks */
|
||||
static struct clk clk_m2p0 = {
|
||||
.parent = &clk_h,
|
||||
.enable_reg = EP93XX_SYSCON_PWRCNT,
|
||||
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0,
|
||||
};
|
||||
static struct clk clk_m2p1 = {
|
||||
.parent = &clk_h,
|
||||
.enable_reg = EP93XX_SYSCON_PWRCNT,
|
||||
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1,
|
||||
};
|
||||
static struct clk clk_m2p2 = {
|
||||
.parent = &clk_h,
|
||||
.enable_reg = EP93XX_SYSCON_PWRCNT,
|
||||
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2,
|
||||
};
|
||||
static struct clk clk_m2p3 = {
|
||||
.parent = &clk_h,
|
||||
.enable_reg = EP93XX_SYSCON_PWRCNT,
|
||||
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3,
|
||||
};
|
||||
static struct clk clk_m2p4 = {
|
||||
.parent = &clk_h,
|
||||
.enable_reg = EP93XX_SYSCON_PWRCNT,
|
||||
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4,
|
||||
};
|
||||
static struct clk clk_m2p5 = {
|
||||
.parent = &clk_h,
|
||||
.enable_reg = EP93XX_SYSCON_PWRCNT,
|
||||
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5,
|
||||
};
|
||||
static struct clk clk_m2p6 = {
|
||||
.parent = &clk_h,
|
||||
.enable_reg = EP93XX_SYSCON_PWRCNT,
|
||||
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6,
|
||||
};
|
||||
static struct clk clk_m2p7 = {
|
||||
.parent = &clk_h,
|
||||
.enable_reg = EP93XX_SYSCON_PWRCNT,
|
||||
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7,
|
||||
};
|
||||
static struct clk clk_m2p8 = {
|
||||
.parent = &clk_h,
|
||||
.enable_reg = EP93XX_SYSCON_PWRCNT,
|
||||
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8,
|
||||
};
|
||||
static struct clk clk_m2p9 = {
|
||||
.parent = &clk_h,
|
||||
.enable_reg = EP93XX_SYSCON_PWRCNT,
|
||||
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9,
|
||||
};
|
||||
static struct clk clk_m2m0 = {
|
||||
.parent = &clk_h,
|
||||
.enable_reg = EP93XX_SYSCON_PWRCNT,
|
||||
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0,
|
||||
};
|
||||
static struct clk clk_m2m1 = {
|
||||
.parent = &clk_h,
|
||||
.enable_reg = EP93XX_SYSCON_PWRCNT,
|
||||
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1,
|
||||
};
|
||||
@ -137,6 +172,7 @@ static struct clk clk_m2m1 = {
|
||||
{ .dev_id = dev, .con_id = con, .clk = ck }
|
||||
|
||||
static struct clk_lookup clocks[] = {
|
||||
INIT_CK(NULL, "xtali", &clk_xtali),
|
||||
INIT_CK("apb:uart1", NULL, &clk_uart1),
|
||||
INIT_CK("apb:uart2", NULL, &clk_uart2),
|
||||
INIT_CK("apb:uart3", NULL, &clk_uart3),
|
||||
@ -163,48 +199,84 @@ static struct clk_lookup clocks[] = {
|
||||
INIT_CK(NULL, "m2m1", &clk_m2m1),
|
||||
};
|
||||
|
||||
static DEFINE_SPINLOCK(clk_lock);
|
||||
|
||||
static void __clk_enable(struct clk *clk)
|
||||
{
|
||||
if (!clk->users++) {
|
||||
if (clk->parent)
|
||||
__clk_enable(clk->parent);
|
||||
|
||||
if (clk->enable_reg) {
|
||||
u32 v;
|
||||
|
||||
v = __raw_readl(clk->enable_reg);
|
||||
v |= clk->enable_mask;
|
||||
if (clk->sw_locked)
|
||||
ep93xx_syscon_swlocked_write(v, clk->enable_reg);
|
||||
else
|
||||
__raw_writel(v, clk->enable_reg);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
int clk_enable(struct clk *clk)
|
||||
{
|
||||
if (!clk->users++ && clk->enable_reg) {
|
||||
u32 value;
|
||||
unsigned long flags;
|
||||
|
||||
value = __raw_readl(clk->enable_reg);
|
||||
value |= clk->enable_mask;
|
||||
if (clk->sw_locked)
|
||||
ep93xx_syscon_swlocked_write(value, clk->enable_reg);
|
||||
else
|
||||
__raw_writel(value, clk->enable_reg);
|
||||
}
|
||||
if (!clk)
|
||||
return -EINVAL;
|
||||
|
||||
spin_lock_irqsave(&clk_lock, flags);
|
||||
__clk_enable(clk);
|
||||
spin_unlock_irqrestore(&clk_lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(clk_enable);
|
||||
|
||||
static void __clk_disable(struct clk *clk)
|
||||
{
|
||||
if (!--clk->users) {
|
||||
if (clk->enable_reg) {
|
||||
u32 v;
|
||||
|
||||
v = __raw_readl(clk->enable_reg);
|
||||
v &= ~clk->enable_mask;
|
||||
if (clk->sw_locked)
|
||||
ep93xx_syscon_swlocked_write(v, clk->enable_reg);
|
||||
else
|
||||
__raw_writel(v, clk->enable_reg);
|
||||
}
|
||||
|
||||
if (clk->parent)
|
||||
__clk_disable(clk->parent);
|
||||
}
|
||||
}
|
||||
|
||||
void clk_disable(struct clk *clk)
|
||||
{
|
||||
if (!--clk->users && clk->enable_reg) {
|
||||
u32 value;
|
||||
unsigned long flags;
|
||||
|
||||
value = __raw_readl(clk->enable_reg);
|
||||
value &= ~clk->enable_mask;
|
||||
if (clk->sw_locked)
|
||||
ep93xx_syscon_swlocked_write(value, clk->enable_reg);
|
||||
else
|
||||
__raw_writel(value, clk->enable_reg);
|
||||
}
|
||||
if (!clk)
|
||||
return;
|
||||
|
||||
spin_lock_irqsave(&clk_lock, flags);
|
||||
__clk_disable(clk);
|
||||
spin_unlock_irqrestore(&clk_lock, flags);
|
||||
}
|
||||
EXPORT_SYMBOL(clk_disable);
|
||||
|
||||
static unsigned long get_uart_rate(struct clk *clk)
|
||||
{
|
||||
unsigned long rate = clk_get_rate(clk->parent);
|
||||
u32 value;
|
||||
|
||||
value = __raw_readl(EP93XX_SYSCON_PWRCNT);
|
||||
if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
|
||||
return EP93XX_EXT_CLK_RATE;
|
||||
return rate;
|
||||
else
|
||||
return EP93XX_EXT_CLK_RATE / 2;
|
||||
return rate / 2;
|
||||
}
|
||||
|
||||
unsigned long clk_get_rate(struct clk *clk)
|
||||
@ -244,16 +316,16 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
|
||||
int *pdiv, int *div)
|
||||
static int calc_clk_div(struct clk *clk, unsigned long rate,
|
||||
int *psel, int *esel, int *pdiv, int *div)
|
||||
{
|
||||
unsigned long max_rate, best_rate = 0,
|
||||
actual_rate = 0, mclk_rate = 0, rate_err = -1;
|
||||
struct clk *mclk;
|
||||
unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
|
||||
int i, found = 0, __div = 0, __pdiv = 0;
|
||||
|
||||
/* Don't exceed the maximum rate */
|
||||
max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
|
||||
(unsigned long)EP93XX_EXT_CLK_RATE / 4);
|
||||
clk_xtali.rate / 4);
|
||||
rate = min(rate, max_rate);
|
||||
|
||||
/*
|
||||
@ -267,11 +339,12 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
|
||||
*/
|
||||
for (i = 0; i < 3; i++) {
|
||||
if (i == 0)
|
||||
mclk_rate = EP93XX_EXT_CLK_RATE * 2;
|
||||
mclk = &clk_xtali;
|
||||
else if (i == 1)
|
||||
mclk_rate = clk_pll1.rate * 2;
|
||||
else if (i == 2)
|
||||
mclk_rate = clk_pll2.rate * 2;
|
||||
mclk = &clk_pll1;
|
||||
else
|
||||
mclk = &clk_pll2;
|
||||
mclk_rate = mclk->rate * 2;
|
||||
|
||||
/* Try each predivider value */
|
||||
for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
|
||||
@ -286,7 +359,8 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
|
||||
*div = __div;
|
||||
*psel = (i == 2);
|
||||
*esel = (i != 0);
|
||||
best_rate = actual_rate;
|
||||
clk->parent = mclk;
|
||||
clk->rate = actual_rate;
|
||||
rate_err = abs(actual_rate - rate);
|
||||
found = 1;
|
||||
}
|
||||
@ -294,21 +368,19 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
|
||||
}
|
||||
|
||||
if (!found)
|
||||
return 0;
|
||||
return -EINVAL;
|
||||
|
||||
return best_rate;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int set_div_rate(struct clk *clk, unsigned long rate)
|
||||
{
|
||||
unsigned long actual_rate;
|
||||
int psel = 0, esel = 0, pdiv = 0, div = 0;
|
||||
int err, psel = 0, esel = 0, pdiv = 0, div = 0;
|
||||
u32 val;
|
||||
|
||||
actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
|
||||
if (actual_rate == 0)
|
||||
return -EINVAL;
|
||||
clk->rate = actual_rate;
|
||||
err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
/* Clear the esel, psel, pdiv and div bits */
|
||||
val = __raw_readl(clk->enable_reg);
|
||||
@ -344,7 +416,7 @@ static unsigned long calc_pll_rate(u32 config_word)
|
||||
unsigned long long rate;
|
||||
int i;
|
||||
|
||||
rate = EP93XX_EXT_CLK_RATE;
|
||||
rate = clk_xtali.rate;
|
||||
rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
|
||||
rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
|
||||
do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
|
||||
@ -377,7 +449,7 @@ static int __init ep93xx_clock_init(void)
|
||||
|
||||
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
|
||||
if (!(value & 0x00800000)) { /* PLL1 bypassed? */
|
||||
clk_pll1.rate = EP93XX_EXT_CLK_RATE;
|
||||
clk_pll1.rate = clk_xtali.rate;
|
||||
} else {
|
||||
clk_pll1.rate = calc_pll_rate(value);
|
||||
}
|
||||
@ -388,7 +460,7 @@ static int __init ep93xx_clock_init(void)
|
||||
|
||||
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
|
||||
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
|
||||
clk_pll2.rate = EP93XX_EXT_CLK_RATE;
|
||||
clk_pll2.rate = clk_xtali.rate;
|
||||
} else if (value & 0x00040000) { /* PLL2 enabled? */
|
||||
clk_pll2.rate = calc_pll_rate(value);
|
||||
} else {
|
||||
|
@ -550,13 +550,11 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
|
||||
platform_device_register(&ep93xx_eth_device);
|
||||
}
|
||||
|
||||
static struct i2c_gpio_platform_data ep93xx_i2c_data = {
|
||||
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
|
||||
.sda_is_open_drain = 0,
|
||||
.scl_pin = EP93XX_GPIO_LINE_EECLK,
|
||||
.scl_is_open_drain = 0,
|
||||
.udelay = 2,
|
||||
};
|
||||
|
||||
/*************************************************************************
|
||||
* EP93xx i2c peripheral handling
|
||||
*************************************************************************/
|
||||
static struct i2c_gpio_platform_data ep93xx_i2c_data;
|
||||
|
||||
static struct platform_device ep93xx_i2c_device = {
|
||||
.name = "i2c-gpio",
|
||||
@ -564,8 +562,25 @@ static struct platform_device ep93xx_i2c_device = {
|
||||
.dev.platform_data = &ep93xx_i2c_data,
|
||||
};
|
||||
|
||||
void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
|
||||
void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
|
||||
struct i2c_board_info *devices, int num)
|
||||
{
|
||||
/*
|
||||
* Set the EEPROM interface pin drive type control.
|
||||
* Defines the driver type for the EECLK and EEDAT pins as either
|
||||
* open drain, which will require an external pull-up, or a normal
|
||||
* CMOS driver.
|
||||
*/
|
||||
if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
|
||||
pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
|
||||
if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
|
||||
pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
|
||||
|
||||
__raw_writel((data->sda_is_open_drain << 1) |
|
||||
(data->scl_is_open_drain << 0),
|
||||
EP93XX_GPIO_EEDRIVE);
|
||||
|
||||
ep93xx_i2c_data = *data;
|
||||
i2c_register_board_info(0, devices, num);
|
||||
platform_device_register(&ep93xx_i2c_device);
|
||||
}
|
||||
|
@ -27,8 +27,10 @@
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c-gpio.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
|
||||
@ -76,13 +78,26 @@ static struct ep93xx_eth_data edb93xx_eth_data = {
|
||||
.phy_id = 1,
|
||||
};
|
||||
|
||||
static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
|
||||
|
||||
/*************************************************************************
|
||||
* EDB93xx i2c peripheral handling
|
||||
*************************************************************************/
|
||||
static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
|
||||
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
|
||||
.sda_is_open_drain = 0,
|
||||
.scl_pin = EP93XX_GPIO_LINE_EECLK,
|
||||
.scl_is_open_drain = 0,
|
||||
.udelay = 0, /* default to 100 kHz */
|
||||
.timeout = 0, /* default to 100 ms */
|
||||
};
|
||||
|
||||
static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("isl1208", 0x6f),
|
||||
},
|
||||
};
|
||||
|
||||
static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
|
||||
static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("ds1337", 0x68),
|
||||
},
|
||||
@ -92,12 +107,14 @@ static void __init edb93xx_register_i2c(void)
|
||||
{
|
||||
if (machine_is_edb9302a() || machine_is_edb9307a() ||
|
||||
machine_is_edb9315a()) {
|
||||
ep93xx_register_i2c(edb93xxa_i2c_data,
|
||||
ARRAY_SIZE(edb93xxa_i2c_data));
|
||||
ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
|
||||
edb93xxa_i2c_board_info,
|
||||
ARRAY_SIZE(edb93xxa_i2c_board_info));
|
||||
} else if (machine_is_edb9307() || machine_is_edb9312() ||
|
||||
machine_is_edb9315()) {
|
||||
ep93xx_register_i2c(edb93xx_i2c_data,
|
||||
ARRAY_SIZE(edb93xx_i2c_data));
|
||||
ep93xx_register_i2c(&edb93xx_i2c_gpio_data
|
||||
edb93xx_i2c_board_info,
|
||||
ARRAY_SIZE(edb93xx_i2c_board_info));
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -52,25 +52,27 @@
|
||||
#define EP93XX_AHB_VIRT_BASE 0xfef00000
|
||||
#define EP93XX_AHB_SIZE 0x00100000
|
||||
|
||||
#define EP93XX_AHB_PHYS(x) (EP93XX_AHB_PHYS_BASE + (x))
|
||||
#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x))
|
||||
|
||||
#define EP93XX_APB_PHYS_BASE 0x80800000
|
||||
#define EP93XX_APB_VIRT_BASE 0xfed00000
|
||||
#define EP93XX_APB_SIZE 0x00200000
|
||||
|
||||
#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x))
|
||||
#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x))
|
||||
|
||||
|
||||
/* AHB peripherals */
|
||||
#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000)
|
||||
|
||||
#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
|
||||
#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000)
|
||||
#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000)
|
||||
|
||||
#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
|
||||
#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000)
|
||||
#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000)
|
||||
|
||||
#define EP93XX_RASTER_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00030000)
|
||||
#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000)
|
||||
#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000)
|
||||
|
||||
#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000)
|
||||
@ -112,21 +114,10 @@
|
||||
|
||||
#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
|
||||
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
|
||||
#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
|
||||
#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
|
||||
#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54)
|
||||
#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58)
|
||||
#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
|
||||
#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
|
||||
#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
|
||||
#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
|
||||
#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c)
|
||||
#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
|
||||
#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac)
|
||||
#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0)
|
||||
#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4)
|
||||
#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
|
||||
#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
|
||||
#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8)
|
||||
|
||||
#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
|
||||
|
||||
@ -134,13 +125,13 @@
|
||||
|
||||
#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
|
||||
|
||||
#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
|
||||
#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000)
|
||||
#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000)
|
||||
|
||||
#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
|
||||
#define EP93XX_UART2_PHYS_BASE EP93XX_APB_PHYS(0x000d0000)
|
||||
#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000)
|
||||
|
||||
#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
|
||||
#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000)
|
||||
#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
|
||||
|
||||
#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
|
||||
@ -148,10 +139,10 @@
|
||||
#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
|
||||
#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000)
|
||||
|
||||
#define EP93XX_PWM_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00110000)
|
||||
#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000)
|
||||
#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000)
|
||||
|
||||
#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000)
|
||||
#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000)
|
||||
#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000)
|
||||
|
||||
#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000)
|
||||
@ -218,6 +209,17 @@
|
||||
#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16)
|
||||
#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15)
|
||||
#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
|
||||
#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c)
|
||||
#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000)
|
||||
#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28)
|
||||
#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8)
|
||||
#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7)
|
||||
#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6)
|
||||
#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5)
|
||||
#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4)
|
||||
#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3)
|
||||
#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1)
|
||||
#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0)
|
||||
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
|
||||
|
||||
#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
|
||||
|
@ -114,17 +114,9 @@ extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
|
||||
* B0..B7 (7..15) to irq 72..79, and
|
||||
* F0..F7 (16..24) to irq 80..87.
|
||||
*/
|
||||
static inline int gpio_to_irq(unsigned gpio)
|
||||
{
|
||||
if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
|
||||
return 64 + gpio;
|
||||
#define gpio_to_irq(gpio) \
|
||||
(((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static inline int irq_to_gpio(unsigned irq)
|
||||
{
|
||||
return irq - gpio_to_irq(0);
|
||||
}
|
||||
#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
|
||||
|
||||
#endif
|
||||
|
@ -9,6 +9,12 @@
|
||||
#define PHYS_OFFSET UL(0x00000000)
|
||||
#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
|
||||
#define PHYS_OFFSET UL(0xc0000000)
|
||||
#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
|
||||
#define PHYS_OFFSET UL(0xd0000000)
|
||||
#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
|
||||
#define PHYS_OFFSET UL(0xe0000000)
|
||||
#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
|
||||
#define PHYS_OFFSET UL(0xf0000000)
|
||||
#else
|
||||
#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
|
||||
#endif
|
||||
|
@ -4,6 +4,7 @@
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
struct i2c_gpio_platform_data;
|
||||
struct i2c_board_info;
|
||||
struct platform_device;
|
||||
struct ep93xxfb_mach_info;
|
||||
@ -33,7 +34,8 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
|
||||
}
|
||||
|
||||
void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
|
||||
void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
|
||||
void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
|
||||
struct i2c_board_info *devices, int num);
|
||||
void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
|
||||
void ep93xx_register_pwm(int pwm0, int pwm1);
|
||||
int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
|
||||
|
@ -2,7 +2,9 @@
|
||||
* linux/arch/arm/mach-ep93xx/micro9.c
|
||||
*
|
||||
* Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
|
||||
* Manfred Gruber <manfred.gruber@contec.at>
|
||||
* Manfred Gruber <m.gruber@tirol.com>
|
||||
* Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
|
||||
* Hubert Feurstein <hubert.feurstein@contec.at>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
@ -20,104 +22,124 @@
|
||||
#include <asm/mach/arch.h>
|
||||
|
||||
|
||||
static struct ep93xx_eth_data micro9_eth_data = {
|
||||
.phy_id = 0x1f,
|
||||
};
|
||||
/*************************************************************************
|
||||
* Micro9 NOR Flash
|
||||
*
|
||||
* Micro9-High has up to 64MB of 32-bit flash on CS1
|
||||
* Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
|
||||
* Micro9-Lite uses a seperate MTD map driver for flash support
|
||||
* Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
|
||||
*************************************************************************/
|
||||
static struct physmap_flash_data micro9_flash_data;
|
||||
|
||||
static void __init micro9_init(void)
|
||||
{
|
||||
ep93xx_register_eth(µ9_eth_data, 1);
|
||||
}
|
||||
|
||||
/*
|
||||
* Micro9-H
|
||||
*/
|
||||
#ifdef CONFIG_MACH_MICRO9H
|
||||
static struct physmap_flash_data micro9h_flash_data = {
|
||||
.width = 4,
|
||||
};
|
||||
|
||||
static struct resource micro9h_flash_resource = {
|
||||
static struct resource micro9_flash_resource = {
|
||||
.start = EP93XX_CS1_PHYS_BASE,
|
||||
.end = EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device micro9h_flash = {
|
||||
static struct platform_device micro9_flash = {
|
||||
.name = "physmap-flash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = µ9h_flash_data,
|
||||
.platform_data = µ9_flash_data,
|
||||
},
|
||||
.num_resources = 1,
|
||||
.resource = µ9h_flash_resource,
|
||||
.resource = µ9_flash_resource,
|
||||
};
|
||||
|
||||
static void __init micro9h_init(void)
|
||||
static void __init __micro9_register_flash(unsigned int width)
|
||||
{
|
||||
platform_device_register(µ9h_flash);
|
||||
micro9_flash_data.width = width;
|
||||
|
||||
platform_device_register(µ9_flash);
|
||||
}
|
||||
|
||||
static void __init micro9h_init_machine(void)
|
||||
static unsigned int __init micro9_detect_bootwidth(void)
|
||||
{
|
||||
u32 v;
|
||||
|
||||
/* Detect the bus width of the external flash memory */
|
||||
v = __raw_readl(EP93XX_SYSCON_SYSCFG);
|
||||
if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
|
||||
return 4; /* 32-bit */
|
||||
else
|
||||
return 2; /* 16-bit */
|
||||
}
|
||||
|
||||
static void __init micro9_register_flash(void)
|
||||
{
|
||||
if (machine_is_micro9())
|
||||
__micro9_register_flash(4);
|
||||
else if (machine_is_micro9m() || machine_is_micro9s())
|
||||
__micro9_register_flash(micro9_detect_bootwidth());
|
||||
}
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* Micro9 Ethernet
|
||||
*************************************************************************/
|
||||
static struct ep93xx_eth_data micro9_eth_data = {
|
||||
.phy_id = 0x1f,
|
||||
};
|
||||
|
||||
|
||||
static void __init micro9_init_machine(void)
|
||||
{
|
||||
ep93xx_init_devices();
|
||||
micro9_init();
|
||||
micro9h_init();
|
||||
ep93xx_register_eth(µ9_eth_data, 1);
|
||||
micro9_register_flash();
|
||||
}
|
||||
|
||||
MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
|
||||
/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
|
||||
|
||||
#ifdef CONFIG_MACH_MICRO9H
|
||||
MACHINE_START(MICRO9, "Contec Micro9-High")
|
||||
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
|
||||
.phys_io = EP93XX_APB_PHYS_BASE,
|
||||
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
|
||||
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
|
||||
.map_io = ep93xx_map_io,
|
||||
.init_irq = ep93xx_init_irq,
|
||||
.timer = &ep93xx_timer,
|
||||
.init_machine = micro9h_init_machine,
|
||||
.init_machine = micro9_init_machine,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Micro9-M
|
||||
*/
|
||||
#ifdef CONFIG_MACH_MICRO9M
|
||||
static void __init micro9m_init_machine(void)
|
||||
{
|
||||
ep93xx_init_devices();
|
||||
micro9_init();
|
||||
}
|
||||
|
||||
MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
|
||||
/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
|
||||
MACHINE_START(MICRO9M, "Contec Micro9-Mid")
|
||||
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
|
||||
.phys_io = EP93XX_APB_PHYS_BASE,
|
||||
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
|
||||
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
|
||||
.boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
|
||||
.map_io = ep93xx_map_io,
|
||||
.init_irq = ep93xx_init_irq,
|
||||
.timer = &ep93xx_timer,
|
||||
.init_machine = micro9m_init_machine,
|
||||
.init_machine = micro9_init_machine,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Micro9-L
|
||||
*/
|
||||
#ifdef CONFIG_MACH_MICRO9L
|
||||
static void __init micro9l_init_machine(void)
|
||||
{
|
||||
ep93xx_init_devices();
|
||||
micro9_init();
|
||||
}
|
||||
|
||||
MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
|
||||
/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
|
||||
MACHINE_START(MICRO9L, "Contec Micro9-Lite")
|
||||
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
|
||||
.phys_io = EP93XX_APB_PHYS_BASE,
|
||||
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
|
||||
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
|
||||
.map_io = ep93xx_map_io,
|
||||
.init_irq = ep93xx_init_irq,
|
||||
.timer = &ep93xx_timer,
|
||||
.init_machine = micro9l_init_machine,
|
||||
.init_machine = micro9_init_machine,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_MICRO9S
|
||||
MACHINE_START(MICRO9S, "Contec Micro9-Slim")
|
||||
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
|
||||
.phys_io = EP93XX_APB_PHYS_BASE,
|
||||
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
|
||||
.boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
|
||||
.map_io = ep93xx_map_io,
|
||||
.init_irq = ep93xx_init_irq,
|
||||
.timer = &ep93xx_timer,
|
||||
.init_machine = micro9_init_machine,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
@ -31,6 +31,7 @@
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/signal.h>
|
||||
#include <asm/system.h>
|
||||
#include <asm/mach/pci.h>
|
||||
#include <asm/irq_regs.h>
|
||||
@ -486,7 +487,7 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
|
||||
return ret;
|
||||
}
|
||||
|
||||
struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
|
||||
struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
|
||||
{
|
||||
return pci_scan_bus(sys->busnr, &pci_v3_ops, sys);
|
||||
}
|
||||
|
@ -31,7 +31,5 @@
|
||||
#define IOP32X_MAX_RAM_SIZE 0x40000000UL
|
||||
#define IOP3XX_MAX_RAM_SIZE IOP32X_MAX_RAM_SIZE
|
||||
#define IOP3XX_PCI_LOWER_MEM_BA 0x80000000
|
||||
#define IOP32X_PCI_MEM_WINDOW_SIZE 0x04000000
|
||||
#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP32X_PCI_MEM_WINDOW_SIZE
|
||||
|
||||
#endif
|
||||
|
@ -36,8 +36,6 @@
|
||||
#define IOP33X_MAX_RAM_SIZE 0x80000000UL
|
||||
#define IOP3XX_MAX_RAM_SIZE IOP33X_MAX_RAM_SIZE
|
||||
#define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
|
||||
#define IOP33X_PCI_MEM_WINDOW_SIZE 0x08000000
|
||||
#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP33X_PCI_MEM_WINDOW_SIZE
|
||||
|
||||
|
||||
#endif
|
||||
|
@ -195,7 +195,7 @@ static int clk_debugfs_open(struct inode *inode, struct file *file)
|
||||
return single_open(file, clk_debugfs_show, NULL);
|
||||
}
|
||||
|
||||
static struct file_operations clk_debugfs_operations = {
|
||||
static const struct file_operations clk_debugfs_operations = {
|
||||
.open = clk_debugfs_open,
|
||||
.read = seq_read,
|
||||
.llseek = seq_lseek,
|
||||
|
@ -38,7 +38,7 @@ static struct omap_id omap_ids[] __initdata = {
|
||||
{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
|
||||
{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
|
||||
{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
|
||||
{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000},
|
||||
{ .jtag_id = 0xb62c, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x08500000},
|
||||
{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
|
||||
{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
|
||||
{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
|
||||
|
@ -54,7 +54,7 @@
|
||||
|
||||
#define TWL4030_MSECURE_GPIO 22
|
||||
|
||||
static int sdp3430_keymap[] = {
|
||||
static int board_keymap[] = {
|
||||
KEY(0, 0, KEY_LEFT),
|
||||
KEY(0, 1, KEY_RIGHT),
|
||||
KEY(0, 2, KEY_A),
|
||||
@ -88,11 +88,15 @@ static int sdp3430_keymap[] = {
|
||||
0
|
||||
};
|
||||
|
||||
static struct matrix_keymap_data board_map_data = {
|
||||
.keymap = board_keymap,
|
||||
.keymap_size = ARRAY_SIZE(board_keymap),
|
||||
};
|
||||
|
||||
static struct twl4030_keypad_data sdp3430_kp_data = {
|
||||
.keymap_data = &board_map_data,
|
||||
.rows = 5,
|
||||
.cols = 6,
|
||||
.keymap = sdp3430_keymap,
|
||||
.keymapsize = ARRAY_SIZE(sdp3430_keymap),
|
||||
.rep = 1,
|
||||
};
|
||||
|
||||
|
@ -80,7 +80,7 @@ static struct platform_device ldp_smsc911x_device = {
|
||||
},
|
||||
};
|
||||
|
||||
static int ldp_twl4030_keymap[] = {
|
||||
static int board_keymap[] = {
|
||||
KEY(0, 0, KEY_1),
|
||||
KEY(1, 0, KEY_2),
|
||||
KEY(2, 0, KEY_3),
|
||||
@ -101,11 +101,15 @@ static int ldp_twl4030_keymap[] = {
|
||||
0
|
||||
};
|
||||
|
||||
static struct matrix_keymap_data board_map_data = {
|
||||
.keymap = board_keymap,
|
||||
.keymap_size = ARRAY_SIZE(board_keymap),
|
||||
};
|
||||
|
||||
static struct twl4030_keypad_data ldp_kp_twl4030_data = {
|
||||
.keymap_data = &board_map_data,
|
||||
.rows = 6,
|
||||
.cols = 6,
|
||||
.keymap = ldp_twl4030_keymap,
|
||||
.keymapsize = ARRAY_SIZE(ldp_twl4030_keymap),
|
||||
.rep = 1,
|
||||
};
|
||||
|
||||
|
@ -139,8 +139,13 @@ static struct gpio_led gpio_leds[];
|
||||
static int beagle_twl_gpio_setup(struct device *dev,
|
||||
unsigned gpio, unsigned ngpio)
|
||||
{
|
||||
if (system_rev >= 0x20 && system_rev <= 0x34301000) {
|
||||
omap_cfg_reg(AG9_34XX_GPIO23);
|
||||
mmc[0].gpio_wp = 23;
|
||||
} else {
|
||||
omap_cfg_reg(AH8_34XX_GPIO29);
|
||||
}
|
||||
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
|
||||
omap_cfg_reg(AH8_34XX_GPIO29);
|
||||
mmc[0].gpio_cd = gpio + 0;
|
||||
twl4030_mmc_init(mmc);
|
||||
|
||||
|
@ -159,7 +159,7 @@ static struct twl4030_usb_data omap3evm_usb_data = {
|
||||
.usb_mode = T2_USB_MODE_ULPI,
|
||||
};
|
||||
|
||||
static int omap3evm_keymap[] = {
|
||||
static int board_keymap[] = {
|
||||
KEY(0, 0, KEY_LEFT),
|
||||
KEY(0, 1, KEY_RIGHT),
|
||||
KEY(0, 2, KEY_A),
|
||||
@ -178,11 +178,15 @@ static int omap3evm_keymap[] = {
|
||||
KEY(3, 3, KEY_P)
|
||||
};
|
||||
|
||||
static struct matrix_keymap_data board_map_data = {
|
||||
.keymap = board_keymap,
|
||||
.keymap_size = ARRAY_SIZE(board_keymap),
|
||||
};
|
||||
|
||||
static struct twl4030_keypad_data omap3evm_kp_data = {
|
||||
.keymap_data = &board_map_data,
|
||||
.rows = 4,
|
||||
.cols = 4,
|
||||
.keymap = omap3evm_keymap,
|
||||
.keymapsize = ARRAY_SIZE(omap3evm_keymap),
|
||||
.rep = 1,
|
||||
};
|
||||
|
||||
|
@ -133,7 +133,7 @@ static void __init pandora_keys_gpio_init(void)
|
||||
omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
|
||||
}
|
||||
|
||||
static int pandora_keypad_map[] = {
|
||||
static int board_keymap[] = {
|
||||
/* col, row, code */
|
||||
KEY(0, 0, KEY_9),
|
||||
KEY(0, 1, KEY_0),
|
||||
@ -180,11 +180,15 @@ static int pandora_keypad_map[] = {
|
||||
KEY(5, 2, KEY_FN),
|
||||
};
|
||||
|
||||
static struct matrix_keymap_data board_map_data = {
|
||||
.keymap = board_keymap,
|
||||
.keymap_size = ARRAY_SIZE(board_keymap),
|
||||
};
|
||||
|
||||
static struct twl4030_keypad_data pandora_kp_data = {
|
||||
.keymap_data = &board_map_data,
|
||||
.rows = 8,
|
||||
.cols = 6,
|
||||
.keymap = pandora_keypad_map,
|
||||
.keymapsize = ARRAY_SIZE(pandora_keypad_map),
|
||||
.rep = 1,
|
||||
};
|
||||
|
||||
|
@ -36,58 +36,62 @@
|
||||
#define SYSTEM_REV_B_USES_VAUX3 0x1699
|
||||
#define SYSTEM_REV_S_USES_VAUX3 0x8
|
||||
|
||||
static int rx51_keymap[] = {
|
||||
static int board_keymap[] = {
|
||||
KEY(0, 0, KEY_Q),
|
||||
KEY(0, 1, KEY_W),
|
||||
KEY(0, 2, KEY_E),
|
||||
KEY(0, 3, KEY_R),
|
||||
KEY(0, 4, KEY_T),
|
||||
KEY(0, 5, KEY_Y),
|
||||
KEY(0, 6, KEY_U),
|
||||
KEY(0, 7, KEY_I),
|
||||
KEY(1, 0, KEY_O),
|
||||
KEY(0, 1, KEY_O),
|
||||
KEY(0, 2, KEY_P),
|
||||
KEY(0, 3, KEY_COMMA),
|
||||
KEY(0, 4, KEY_BACKSPACE),
|
||||
KEY(0, 6, KEY_A),
|
||||
KEY(0, 7, KEY_S),
|
||||
KEY(1, 0, KEY_W),
|
||||
KEY(1, 1, KEY_D),
|
||||
KEY(1, 2, KEY_DOT),
|
||||
KEY(1, 3, KEY_V),
|
||||
KEY(1, 4, KEY_DOWN),
|
||||
KEY(2, 0, KEY_P),
|
||||
KEY(2, 1, KEY_F),
|
||||
KEY(1, 2, KEY_F),
|
||||
KEY(1, 3, KEY_G),
|
||||
KEY(1, 4, KEY_H),
|
||||
KEY(1, 5, KEY_J),
|
||||
KEY(1, 6, KEY_K),
|
||||
KEY(1, 7, KEY_L),
|
||||
KEY(2, 0, KEY_E),
|
||||
KEY(2, 1, KEY_DOT),
|
||||
KEY(2, 2, KEY_UP),
|
||||
KEY(2, 3, KEY_B),
|
||||
KEY(2, 4, KEY_RIGHT),
|
||||
KEY(3, 0, KEY_COMMA),
|
||||
KEY(3, 1, KEY_G),
|
||||
KEY(3, 2, KEY_ENTER),
|
||||
KEY(2, 3, KEY_ENTER),
|
||||
KEY(2, 5, KEY_Z),
|
||||
KEY(2, 6, KEY_X),
|
||||
KEY(2, 7, KEY_C),
|
||||
KEY(3, 0, KEY_R),
|
||||
KEY(3, 1, KEY_V),
|
||||
KEY(3, 2, KEY_B),
|
||||
KEY(3, 3, KEY_N),
|
||||
KEY(4, 0, KEY_BACKSPACE),
|
||||
KEY(4, 1, KEY_H),
|
||||
KEY(4, 3, KEY_M),
|
||||
KEY(3, 4, KEY_M),
|
||||
KEY(3, 5, KEY_SPACE),
|
||||
KEY(3, 6, KEY_SPACE),
|
||||
KEY(3, 7, KEY_LEFT),
|
||||
KEY(4, 0, KEY_T),
|
||||
KEY(4, 1, KEY_DOWN),
|
||||
KEY(4, 2, KEY_RIGHT),
|
||||
KEY(4, 4, KEY_LEFTCTRL),
|
||||
KEY(5, 1, KEY_J),
|
||||
KEY(5, 2, KEY_Z),
|
||||
KEY(5, 3, KEY_SPACE),
|
||||
KEY(5, 4, KEY_LEFTSHIFT),
|
||||
KEY(6, 0, KEY_A),
|
||||
KEY(6, 1, KEY_K),
|
||||
KEY(6, 2, KEY_X),
|
||||
KEY(6, 3, KEY_SPACE),
|
||||
KEY(6, 4, KEY_FN),
|
||||
KEY(7, 0, KEY_S),
|
||||
KEY(7, 1, KEY_L),
|
||||
KEY(7, 2, KEY_C),
|
||||
KEY(7, 3, KEY_LEFT),
|
||||
KEY(0xff, 0, KEY_F6),
|
||||
KEY(0xff, 1, KEY_F7),
|
||||
KEY(0xff, 2, KEY_F8),
|
||||
KEY(0xff, 4, KEY_F9),
|
||||
KEY(0xff, 5, KEY_F10),
|
||||
KEY(4, 5, KEY_RIGHTALT),
|
||||
KEY(4, 6, KEY_LEFTSHIFT),
|
||||
KEY(5, 0, KEY_Y),
|
||||
KEY(6, 0, KEY_U),
|
||||
KEY(7, 0, KEY_I),
|
||||
KEY(7, 1, KEY_F7),
|
||||
KEY(7, 2, KEY_F8),
|
||||
KEY(0xff, 2, KEY_F9),
|
||||
KEY(0xff, 4, KEY_F10),
|
||||
KEY(0xff, 5, KEY_F11),
|
||||
};
|
||||
|
||||
static struct matrix_keymap_data board_map_data = {
|
||||
.keymap = board_keymap,
|
||||
.keymap_size = ARRAY_SIZE(board_keymap),
|
||||
};
|
||||
|
||||
static struct twl4030_keypad_data rx51_kp_data = {
|
||||
.keymap_data = &board_map_data,
|
||||
.rows = 8,
|
||||
.cols = 8,
|
||||
.keymap = rx51_keymap,
|
||||
.keymapsize = ARRAY_SIZE(rx51_keymap),
|
||||
.rep = 1,
|
||||
};
|
||||
|
||||
@ -440,7 +444,7 @@ static int __init rx51_i2c_init(void)
|
||||
rx51_twldata.vaux3 = &rx51_vaux3_cam;
|
||||
rx51_twldata.vmmc2 = &rx51_vmmc2;
|
||||
}
|
||||
omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
|
||||
omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
|
||||
ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
|
||||
omap_register_i2c_bus(2, 100, NULL, 0);
|
||||
omap_register_i2c_bus(3, 400, NULL, 0);
|
||||
|
@ -25,9 +25,10 @@
|
||||
#include <mach/keypad.h>
|
||||
|
||||
#include "mmc-twl4030.h"
|
||||
#include "sdram-micron-mt46h32m32lf-6.h"
|
||||
|
||||
/* Zoom2 has Qwerty keyboard*/
|
||||
static int zoom2_twl4030_keymap[] = {
|
||||
static int board_keymap[] = {
|
||||
KEY(0, 0, KEY_E),
|
||||
KEY(1, 0, KEY_R),
|
||||
KEY(2, 0, KEY_T),
|
||||
@ -82,11 +83,15 @@ static int zoom2_twl4030_keymap[] = {
|
||||
0
|
||||
};
|
||||
|
||||
static struct matrix_keymap_data board_map_data = {
|
||||
.keymap = board_keymap,
|
||||
.keymap_size = ARRAY_SIZE(board_keymap),
|
||||
};
|
||||
|
||||
static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
|
||||
.keymap_data = &board_map_data,
|
||||
.rows = 8,
|
||||
.cols = 8,
|
||||
.keymap = zoom2_twl4030_keymap,
|
||||
.keymapsize = ARRAY_SIZE(zoom2_twl4030_keymap),
|
||||
.rep = 1,
|
||||
};
|
||||
|
||||
@ -209,7 +214,8 @@ static void __init omap_zoom2_init_irq(void)
|
||||
{
|
||||
omap_board_config = zoom2_config;
|
||||
omap_board_config_size = ARRAY_SIZE(zoom2_config);
|
||||
omap2_init_common_hw(NULL, NULL);
|
||||
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
|
||||
mt46h32m32lf6_sdrc_params);
|
||||
omap_init_irq();
|
||||
omap_gpio_init();
|
||||
}
|
||||
|
@ -769,6 +769,7 @@ int __init omap2_clk_init(void)
|
||||
if (c->cpu & cpu_mask) {
|
||||
clkdev_add(&c->lk);
|
||||
clk_register(c->lk.clk);
|
||||
omap2_init_clk_clkdm(c->lk.clk);
|
||||
}
|
||||
|
||||
/* Check the MPU rate set by bootloader */
|
||||
|
@ -338,6 +338,13 @@ static struct omap_clk omap34xx_clks[] = {
|
||||
*/
|
||||
#define SDRC_MPURATE_LOOPS 96
|
||||
|
||||
/*
|
||||
* DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
|
||||
* that are sourced by DPLL5, and both of these require this clock
|
||||
* to be at 120 MHz for proper operation.
|
||||
*/
|
||||
#define DPLL5_FREQ_FOR_USBHOST 120000000
|
||||
|
||||
/**
|
||||
* omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
|
||||
* @clk: struct clk * being enabled
|
||||
@ -1056,6 +1063,28 @@ void omap2_clk_prepare_for_reboot(void)
|
||||
#endif
|
||||
}
|
||||
|
||||
static void omap3_clk_lock_dpll5(void)
|
||||
{
|
||||
struct clk *dpll5_clk;
|
||||
struct clk *dpll5_m2_clk;
|
||||
|
||||
dpll5_clk = clk_get(NULL, "dpll5_ck");
|
||||
clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
|
||||
clk_enable(dpll5_clk);
|
||||
|
||||
/* Enable autoidle to allow it to enter low power bypass */
|
||||
omap3_dpll_allow_idle(dpll5_clk);
|
||||
|
||||
/* Program dpll5_m2_clk divider for no division */
|
||||
dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
|
||||
clk_enable(dpll5_m2_clk);
|
||||
clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
|
||||
|
||||
clk_disable(dpll5_m2_clk);
|
||||
clk_disable(dpll5_clk);
|
||||
return;
|
||||
}
|
||||
|
||||
/* REVISIT: Move this init stuff out into clock.c */
|
||||
|
||||
/*
|
||||
@ -1148,6 +1177,12 @@ int __init omap2_clk_init(void)
|
||||
*/
|
||||
clk_enable_init_clocks();
|
||||
|
||||
/*
|
||||
* Lock DPLL5 and put it in autoidle.
|
||||
*/
|
||||
if (omap_rev() >= OMAP3430_REV_ES2_0)
|
||||
omap3_clk_lock_dpll5();
|
||||
|
||||
/* Avoid sleeping during omap2_clk_prepare_for_reboot() */
|
||||
/* REVISIT: not yet ready for 343x */
|
||||
#if 0
|
||||
|
@ -137,6 +137,36 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm)
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* _omap2_clkdm_set_hwsup - set the hwsup idle transition bit
|
||||
* @clkdm: struct clockdomain *
|
||||
* @enable: int 0 to disable, 1 to enable
|
||||
*
|
||||
* Internal helper for actually switching the bit that controls hwsup
|
||||
* idle transitions for clkdm.
|
||||
*/
|
||||
static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
|
||||
{
|
||||
u32 v;
|
||||
|
||||
if (cpu_is_omap24xx()) {
|
||||
if (enable)
|
||||
v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
|
||||
else
|
||||
v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
|
||||
} else if (cpu_is_omap34xx()) {
|
||||
if (enable)
|
||||
v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
|
||||
else
|
||||
v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
|
||||
} else {
|
||||
BUG();
|
||||
}
|
||||
|
||||
cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
|
||||
v << __ffs(clkdm->clktrctrl_mask),
|
||||
clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
|
||||
}
|
||||
|
||||
static struct clockdomain *_clkdm_lookup(const char *name)
|
||||
{
|
||||
@ -456,8 +486,6 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
|
||||
*/
|
||||
void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
|
||||
{
|
||||
u32 v;
|
||||
|
||||
if (!clkdm)
|
||||
return;
|
||||
|
||||
@ -473,18 +501,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
|
||||
if (atomic_read(&clkdm->usecount) > 0)
|
||||
_clkdm_add_autodeps(clkdm);
|
||||
|
||||
if (cpu_is_omap24xx())
|
||||
v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
|
||||
else if (cpu_is_omap34xx())
|
||||
v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
|
||||
else
|
||||
BUG();
|
||||
|
||||
|
||||
cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
|
||||
v << __ffs(clkdm->clktrctrl_mask),
|
||||
clkdm->pwrdm.ptr->prcm_offs,
|
||||
CM_CLKSTCTRL);
|
||||
_omap2_clkdm_set_hwsup(clkdm, 1);
|
||||
|
||||
pwrdm_clkdm_state_switch(clkdm);
|
||||
}
|
||||
@ -500,8 +517,6 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
|
||||
*/
|
||||
void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
|
||||
{
|
||||
u32 v;
|
||||
|
||||
if (!clkdm)
|
||||
return;
|
||||
|
||||
@ -514,16 +529,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
|
||||
pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
|
||||
clkdm->name);
|
||||
|
||||
if (cpu_is_omap24xx())
|
||||
v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
|
||||
else if (cpu_is_omap34xx())
|
||||
v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
|
||||
else
|
||||
BUG();
|
||||
|
||||
cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
|
||||
v << __ffs(clkdm->clktrctrl_mask),
|
||||
clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
|
||||
_omap2_clkdm_set_hwsup(clkdm, 0);
|
||||
|
||||
if (atomic_read(&clkdm->usecount) > 0)
|
||||
_clkdm_del_autodeps(clkdm);
|
||||
@ -569,10 +575,14 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
|
||||
v = omap2_clkdm_clktrctrl_read(clkdm);
|
||||
|
||||
if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
|
||||
(cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
|
||||
(cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
|
||||
/* Disable HW transitions when we are changing deps */
|
||||
_omap2_clkdm_set_hwsup(clkdm, 0);
|
||||
_clkdm_add_autodeps(clkdm);
|
||||
else
|
||||
_omap2_clkdm_set_hwsup(clkdm, 1);
|
||||
} else {
|
||||
omap2_clkdm_wakeup(clkdm);
|
||||
}
|
||||
|
||||
pwrdm_wait_transition(clkdm->pwrdm.ptr);
|
||||
pwrdm_clkdm_state_switch(clkdm);
|
||||
@ -623,10 +633,14 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
|
||||
v = omap2_clkdm_clktrctrl_read(clkdm);
|
||||
|
||||
if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
|
||||
(cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
|
||||
(cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
|
||||
/* Disable HW transitions when we are changing deps */
|
||||
_omap2_clkdm_set_hwsup(clkdm, 0);
|
||||
_clkdm_del_autodeps(clkdm);
|
||||
else
|
||||
_omap2_clkdm_set_hwsup(clkdm, 1);
|
||||
} else {
|
||||
omap2_clkdm_sleep(clkdm);
|
||||
}
|
||||
|
||||
pwrdm_clkdm_state_switch(clkdm);
|
||||
|
||||
|
@ -22,7 +22,6 @@
|
||||
#include <asm/atomic.h>
|
||||
|
||||
#include "cm.h"
|
||||
#include "cm-regbits-4xxx.h"
|
||||
|
||||
/* XXX move this to cm.h */
|
||||
/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
|
||||
@ -50,19 +49,7 @@
|
||||
*/
|
||||
int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
|
||||
{
|
||||
int i = 0;
|
||||
u8 cm_id;
|
||||
u16 prcm_mod_offs;
|
||||
u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK;
|
||||
|
||||
cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT;
|
||||
prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK;
|
||||
|
||||
while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs,
|
||||
OMAP4_CM_CLKCTRL_DREG) & mask) != 0) &&
|
||||
(i++ < MAX_MODULE_READY_TIME))
|
||||
udelay(1);
|
||||
|
||||
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
|
||||
/* FIXME: Add clock manager related code */
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -355,29 +355,60 @@ static struct platform_device omap2_mcspi4 = {
|
||||
};
|
||||
#endif
|
||||
|
||||
static void omap_init_mcspi(void)
|
||||
#ifdef CONFIG_ARCH_OMAP4
|
||||
static inline void omap4_mcspi_fixup(void)
|
||||
{
|
||||
if (cpu_is_omap44xx()) {
|
||||
omap2_mcspi1_resources[0].start = OMAP4_MCSPI1_BASE;
|
||||
omap2_mcspi1_resources[0].end = OMAP4_MCSPI1_BASE + 0xff;
|
||||
omap2_mcspi2_resources[0].start = OMAP4_MCSPI2_BASE;
|
||||
omap2_mcspi2_resources[0].end = OMAP4_MCSPI2_BASE + 0xff;
|
||||
omap2_mcspi3_resources[0].start = OMAP4_MCSPI3_BASE;
|
||||
omap2_mcspi3_resources[0].end = OMAP4_MCSPI3_BASE + 0xff;
|
||||
omap2_mcspi4_resources[0].start = OMAP4_MCSPI4_BASE;
|
||||
omap2_mcspi4_resources[0].end = OMAP4_MCSPI4_BASE + 0xff;
|
||||
}
|
||||
platform_device_register(&omap2_mcspi1);
|
||||
platform_device_register(&omap2_mcspi2);
|
||||
omap2_mcspi1_resources[0].start = OMAP4_MCSPI1_BASE;
|
||||
omap2_mcspi1_resources[0].end = OMAP4_MCSPI1_BASE + 0xff;
|
||||
omap2_mcspi2_resources[0].start = OMAP4_MCSPI2_BASE;
|
||||
omap2_mcspi2_resources[0].end = OMAP4_MCSPI2_BASE + 0xff;
|
||||
omap2_mcspi3_resources[0].start = OMAP4_MCSPI3_BASE;
|
||||
omap2_mcspi3_resources[0].end = OMAP4_MCSPI3_BASE + 0xff;
|
||||
omap2_mcspi4_resources[0].start = OMAP4_MCSPI4_BASE;
|
||||
omap2_mcspi4_resources[0].end = OMAP4_MCSPI4_BASE + 0xff;
|
||||
}
|
||||
#else
|
||||
static inline void omap4_mcspi_fixup(void)
|
||||
{
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
|
||||
defined(CONFIG_ARCH_OMAP4)
|
||||
if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
|
||||
platform_device_register(&omap2_mcspi3);
|
||||
static inline void omap2_mcspi3_init(void)
|
||||
{
|
||||
platform_device_register(&omap2_mcspi3);
|
||||
}
|
||||
#else
|
||||
static inline void omap2_mcspi3_init(void)
|
||||
{
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
|
||||
if (cpu_is_omap343x() || cpu_is_omap44xx())
|
||||
platform_device_register(&omap2_mcspi4);
|
||||
static inline void omap2_mcspi4_init(void)
|
||||
{
|
||||
platform_device_register(&omap2_mcspi4);
|
||||
}
|
||||
#else
|
||||
static inline void omap2_mcspi4_init(void)
|
||||
{
|
||||
}
|
||||
#endif
|
||||
|
||||
static void omap_init_mcspi(void)
|
||||
{
|
||||
if (cpu_is_omap44xx())
|
||||
omap4_mcspi_fixup();
|
||||
|
||||
platform_device_register(&omap2_mcspi1);
|
||||
platform_device_register(&omap2_mcspi2);
|
||||
|
||||
if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
|
||||
omap2_mcspi3_init();
|
||||
|
||||
if (cpu_is_omap343x() || cpu_is_omap44xx())
|
||||
omap2_mcspi4_init();
|
||||
}
|
||||
|
||||
#else
|
||||
|
@ -294,10 +294,10 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
|
||||
else if (cpu_is_omap34xx())
|
||||
hwmods = omap34xx_hwmods;
|
||||
|
||||
omap_hwmod_init(hwmods);
|
||||
omap2_mux_init();
|
||||
#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
|
||||
/* The OPP tables have to be registered before a clk init */
|
||||
omap_hwmod_init(hwmods);
|
||||
omap2_mux_init();
|
||||
omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
|
||||
pwrdm_init(powerdomains_omap);
|
||||
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
|
||||
|
@ -79,7 +79,7 @@ static int omap2_iommu_enable(struct iommu *obj)
|
||||
l = iommu_read_reg(obj, MMU_SYSSTATUS);
|
||||
if (l & MMU_SYS_RESETDONE)
|
||||
break;
|
||||
} while (time_after(jiffies, timeout));
|
||||
} while (!time_after(jiffies, timeout));
|
||||
|
||||
if (!(l & MMU_SYS_RESETDONE)) {
|
||||
dev_err(obj->dev, "can't take mmu out of reset\n");
|
||||
|
@ -30,6 +30,14 @@
|
||||
#define MAILBOX_IRQ_NEWMSG(u) (1 << (2 * (u)))
|
||||
#define MAILBOX_IRQ_NOTFULL(u) (1 << (2 * (u) + 1))
|
||||
|
||||
/* SYSCONFIG: register bit definition */
|
||||
#define AUTOIDLE (1 << 0)
|
||||
#define SOFTRESET (1 << 1)
|
||||
#define SMARTIDLE (2 << 3)
|
||||
|
||||
/* SYSSTATUS: register bit definition */
|
||||
#define RESETDONE (1 << 0)
|
||||
|
||||
#define MBOX_REG_SIZE 0x120
|
||||
#define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32))
|
||||
|
||||
@ -69,21 +77,33 @@ static inline void mbox_write_reg(u32 val, size_t ofs)
|
||||
/* Mailbox H/W preparations */
|
||||
static int omap2_mbox_startup(struct omap_mbox *mbox)
|
||||
{
|
||||
unsigned int l;
|
||||
u32 l;
|
||||
unsigned long timeout;
|
||||
|
||||
mbox_ick_handle = clk_get(NULL, "mailboxes_ick");
|
||||
if (IS_ERR(mbox_ick_handle)) {
|
||||
printk("Could not get mailboxes_ick\n");
|
||||
pr_err("Can't get mailboxes_ick\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
clk_enable(mbox_ick_handle);
|
||||
|
||||
mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
|
||||
timeout = jiffies + msecs_to_jiffies(20);
|
||||
do {
|
||||
l = mbox_read_reg(MAILBOX_SYSSTATUS);
|
||||
if (l & RESETDONE)
|
||||
break;
|
||||
} while (!time_after(jiffies, timeout));
|
||||
|
||||
if (!(l & RESETDONE)) {
|
||||
pr_err("Can't take mmu out of reset\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
l = mbox_read_reg(MAILBOX_REVISION);
|
||||
pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
|
||||
|
||||
/* set smart-idle & autoidle */
|
||||
l = mbox_read_reg(MAILBOX_SYSCONFIG);
|
||||
l |= 0x00000011;
|
||||
l = SMARTIDLE | AUTOIDLE;
|
||||
mbox_write_reg(l, MAILBOX_SYSCONFIG);
|
||||
|
||||
omap2_mbox_enable_irq(mbox, IRQ_RX);
|
||||
@ -156,6 +176,9 @@ static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
|
||||
u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
|
||||
|
||||
mbox_write_reg(bit, p->irqstatus);
|
||||
|
||||
/* Flush posted write for irq status to avoid spurious interrupts */
|
||||
mbox_read_reg(p->irqstatus);
|
||||
}
|
||||
|
||||
static int omap2_mbox_is_irq(struct omap_mbox *mbox,
|
||||
|
@ -460,6 +460,8 @@ MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0,
|
||||
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
|
||||
MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
|
||||
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
|
||||
MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee,
|
||||
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
|
||||
MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
|
||||
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
|
||||
MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
|
||||
@ -472,6 +474,8 @@ MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc,
|
||||
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
|
||||
MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
|
||||
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
|
||||
MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162,
|
||||
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
|
||||
MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
|
||||
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
|
||||
MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
|
||||
|
@ -541,7 +541,7 @@ static int __init pm_dbg_init(void)
|
||||
printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
|
||||
d = debugfs_create_dir("pm_debug", NULL);
|
||||
if (IS_ERR(d))
|
||||
return PTR_ERR(d);
|
||||
@ -551,7 +551,7 @@ static int __init pm_dbg_init(void)
|
||||
(void) debugfs_create_file("time", S_IRUGO,
|
||||
d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
|
||||
|
||||
pwrdm_for_each(pwrdms_setup, (void *)d);
|
||||
pwrdm_for_each_nolock(pwrdms_setup, (void *)d);
|
||||
|
||||
pm_dbg_dir = debugfs_create_dir("registers", d);
|
||||
if (IS_ERR(pm_dbg_dir))
|
||||
|
@ -51,97 +51,112 @@ static void (*_omap_sram_idle)(u32 *addr, int save_state);
|
||||
|
||||
static struct powerdomain *mpu_pwrdm;
|
||||
|
||||
/* PRCM Interrupt Handler for wakeups */
|
||||
/*
|
||||
* PRCM Interrupt Handler Helper Function
|
||||
*
|
||||
* The purpose of this function is to clear any wake-up events latched
|
||||
* in the PRCM PM_WKST_x registers. It is possible that a wake-up event
|
||||
* may occur whilst attempting to clear a PM_WKST_x register and thus
|
||||
* set another bit in this register. A while loop is used to ensure
|
||||
* that any peripheral wake-up events occurring while attempting to
|
||||
* clear the PM_WKST_x are detected and cleared.
|
||||
*/
|
||||
static int prcm_clear_mod_irqs(s16 module, u8 regs)
|
||||
{
|
||||
u32 wkst, fclk, iclk, clken;
|
||||
u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
|
||||
u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
|
||||
u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
|
||||
u16 grpsel_off = (regs == 3) ?
|
||||
OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
|
||||
int c = 0;
|
||||
|
||||
wkst = prm_read_mod_reg(module, wkst_off);
|
||||
wkst &= prm_read_mod_reg(module, grpsel_off);
|
||||
if (wkst) {
|
||||
iclk = cm_read_mod_reg(module, iclk_off);
|
||||
fclk = cm_read_mod_reg(module, fclk_off);
|
||||
while (wkst) {
|
||||
clken = wkst;
|
||||
cm_set_mod_reg_bits(clken, module, iclk_off);
|
||||
/*
|
||||
* For USBHOST, we don't know whether HOST1 or
|
||||
* HOST2 woke us up, so enable both f-clocks
|
||||
*/
|
||||
if (module == OMAP3430ES2_USBHOST_MOD)
|
||||
clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
|
||||
cm_set_mod_reg_bits(clken, module, fclk_off);
|
||||
prm_write_mod_reg(wkst, module, wkst_off);
|
||||
wkst = prm_read_mod_reg(module, wkst_off);
|
||||
c++;
|
||||
}
|
||||
cm_write_mod_reg(iclk, module, iclk_off);
|
||||
cm_write_mod_reg(fclk, module, fclk_off);
|
||||
}
|
||||
|
||||
return c;
|
||||
}
|
||||
|
||||
static int _prcm_int_handle_wakeup(void)
|
||||
{
|
||||
int c;
|
||||
|
||||
c = prcm_clear_mod_irqs(WKUP_MOD, 1);
|
||||
c += prcm_clear_mod_irqs(CORE_MOD, 1);
|
||||
c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1);
|
||||
if (omap_rev() > OMAP3430_REV_ES1_0) {
|
||||
c += prcm_clear_mod_irqs(CORE_MOD, 3);
|
||||
c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1);
|
||||
}
|
||||
|
||||
return c;
|
||||
}
|
||||
|
||||
/*
|
||||
* PRCM Interrupt Handler
|
||||
*
|
||||
* The PRM_IRQSTATUS_MPU register indicates if there are any pending
|
||||
* interrupts from the PRCM for the MPU. These bits must be cleared in
|
||||
* order to clear the PRCM interrupt. The PRCM interrupt handler is
|
||||
* implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear
|
||||
* the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU
|
||||
* register indicates that a wake-up event is pending for the MPU and
|
||||
* this bit can only be cleared if the all the wake-up events latched
|
||||
* in the various PM_WKST_x registers have been cleared. The interrupt
|
||||
* handler is implemented using a do-while loop so that if a wake-up
|
||||
* event occurred during the processing of the prcm interrupt handler
|
||||
* (setting a bit in the corresponding PM_WKST_x register and thus
|
||||
* preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register)
|
||||
* this would be handled.
|
||||
*/
|
||||
static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
|
||||
{
|
||||
u32 wkst, irqstatus_mpu;
|
||||
u32 fclk, iclk;
|
||||
u32 irqstatus_mpu;
|
||||
int c = 0;
|
||||
|
||||
/* WKUP */
|
||||
wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
|
||||
if (wkst) {
|
||||
iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
|
||||
fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
|
||||
cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
|
||||
cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
|
||||
prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
|
||||
while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
|
||||
cpu_relax();
|
||||
cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
|
||||
cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
|
||||
}
|
||||
do {
|
||||
irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
|
||||
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
|
||||
|
||||
/* CORE */
|
||||
wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
|
||||
if (wkst) {
|
||||
iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
|
||||
fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
|
||||
cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
|
||||
cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
|
||||
prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
|
||||
while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
|
||||
cpu_relax();
|
||||
cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
|
||||
cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
|
||||
}
|
||||
wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
|
||||
if (wkst) {
|
||||
iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
|
||||
fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
|
||||
cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
|
||||
cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
|
||||
prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
|
||||
while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
|
||||
cpu_relax();
|
||||
cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
|
||||
cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
|
||||
}
|
||||
if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) {
|
||||
c = _prcm_int_handle_wakeup();
|
||||
|
||||
/* PER */
|
||||
wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
|
||||
if (wkst) {
|
||||
iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
|
||||
fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
|
||||
cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
|
||||
cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
|
||||
prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
|
||||
while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
|
||||
cpu_relax();
|
||||
cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
|
||||
cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
|
||||
}
|
||||
|
||||
if (omap_rev() > OMAP3430_REV_ES1_0) {
|
||||
/* USBHOST */
|
||||
wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
|
||||
if (wkst) {
|
||||
iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
|
||||
CM_ICLKEN);
|
||||
fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
|
||||
CM_FCLKEN);
|
||||
cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
|
||||
CM_ICLKEN);
|
||||
cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
|
||||
CM_FCLKEN);
|
||||
prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
|
||||
PM_WKST);
|
||||
while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
|
||||
PM_WKST))
|
||||
cpu_relax();
|
||||
cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
|
||||
CM_ICLKEN);
|
||||
cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
|
||||
CM_FCLKEN);
|
||||
/*
|
||||
* Is the MPU PRCM interrupt handler racing with the
|
||||
* IVA2 PRCM interrupt handler ?
|
||||
*/
|
||||
WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup "
|
||||
"but no wakeup sources are marked\n");
|
||||
} else {
|
||||
/* XXX we need to expand our PRCM interrupt handler */
|
||||
WARN(1, "prcm: WARNING: PRCM interrupt received, but "
|
||||
"no code to handle it (%08x)\n", irqstatus_mpu);
|
||||
}
|
||||
}
|
||||
|
||||
irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
|
||||
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
|
||||
prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
|
||||
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
|
||||
prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
|
||||
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
|
||||
|
||||
while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
|
||||
cpu_relax();
|
||||
} while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
@ -624,6 +639,16 @@ static void __init prcm_setup_regs(void)
|
||||
prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
|
||||
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
|
||||
|
||||
/* Enable GPIO wakeups in PER */
|
||||
prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
|
||||
OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
|
||||
OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN);
|
||||
/* and allow them to wake up MPU */
|
||||
prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
|
||||
OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
|
||||
OMAP3430_GRPSEL_GPIO6,
|
||||
OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
|
||||
|
||||
/* Don't attach IVA interrupts */
|
||||
prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
|
||||
prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
|
||||
|
@ -273,35 +273,50 @@ struct powerdomain *pwrdm_lookup(const char *name)
|
||||
}
|
||||
|
||||
/**
|
||||
* pwrdm_for_each - call function on each registered clockdomain
|
||||
* pwrdm_for_each_nolock - call function on each registered clockdomain
|
||||
* @fn: callback function *
|
||||
*
|
||||
* Call the supplied function for each registered powerdomain. The
|
||||
* callback function can return anything but 0 to bail out early from
|
||||
* the iterator. The callback function is called with the pwrdm_rwlock
|
||||
* held for reading, so no powerdomain structure manipulation
|
||||
* functions should be called from the callback, although hardware
|
||||
* powerdomain control functions are fine. Returns the last return
|
||||
* value of the callback function, which should be 0 for success or
|
||||
* anything else to indicate failure; or -EINVAL if the function
|
||||
* pointer is null.
|
||||
* the iterator. Returns the last return value of the callback function, which
|
||||
* should be 0 for success or anything else to indicate failure; or -EINVAL if
|
||||
* the function pointer is null.
|
||||
*/
|
||||
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
|
||||
void *user)
|
||||
int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
|
||||
void *user)
|
||||
{
|
||||
struct powerdomain *temp_pwrdm;
|
||||
unsigned long flags;
|
||||
int ret = 0;
|
||||
|
||||
if (!fn)
|
||||
return -EINVAL;
|
||||
|
||||
read_lock_irqsave(&pwrdm_rwlock, flags);
|
||||
list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
|
||||
ret = (*fn)(temp_pwrdm, user);
|
||||
if (ret)
|
||||
break;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* pwrdm_for_each - call function on each registered clockdomain
|
||||
* @fn: callback function *
|
||||
*
|
||||
* This function is the same as 'pwrdm_for_each_nolock()', but keeps the
|
||||
* &pwrdm_rwlock locked for reading, so no powerdomain structure manipulation
|
||||
* functions should be called from the callback, although hardware powerdomain
|
||||
* control functions are fine.
|
||||
*/
|
||||
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
|
||||
void *user)
|
||||
{
|
||||
unsigned long flags;
|
||||
int ret;
|
||||
|
||||
read_lock_irqsave(&pwrdm_rwlock, flags);
|
||||
ret = pwrdm_for_each_nolock(fn, user);
|
||||
read_unlock_irqrestore(&pwrdm_rwlock, flags);
|
||||
|
||||
return ret;
|
||||
|
@ -110,7 +110,7 @@ static struct plat_serial8250_port serial_platform_data2[] = {
|
||||
.uartclk = OMAP24XX_BASE_BAUD * 16,
|
||||
}, {
|
||||
#ifdef CONFIG_ARCH_OMAP4
|
||||
.membase = IO_ADDRESS(OMAP_UART4_BASE),
|
||||
.membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
|
||||
.mapbase = OMAP_UART4_BASE,
|
||||
.irq = 70,
|
||||
.flags = UPF_BOOT_AUTOCONF,
|
||||
@ -126,7 +126,7 @@ static struct plat_serial8250_port serial_platform_data2[] = {
|
||||
#ifdef CONFIG_ARCH_OMAP4
|
||||
static struct plat_serial8250_port serial_platform_data3[] = {
|
||||
{
|
||||
.membase = IO_ADDRESS(OMAP_UART4_BASE),
|
||||
.membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
|
||||
.mapbase = OMAP_UART4_BASE,
|
||||
.irq = 70,
|
||||
.flags = UPF_BOOT_AUTOCONF,
|
||||
@ -579,7 +579,7 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
|
||||
{
|
||||
.pdev = {
|
||||
.name = "serial8250",
|
||||
.id = 3
|
||||
.id = 3,
|
||||
.dev = {
|
||||
.platform_data = serial_platform_data3,
|
||||
},
|
||||
|
@ -155,7 +155,7 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
|
||||
|
||||
static pxa_freqs_t pxa27x_freqs[] = {
|
||||
{104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 },
|
||||
{156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
|
||||
{156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
|
||||
{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
|
||||
{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
|
||||
{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
|
||||
|
@ -238,7 +238,7 @@ static struct resource csb726_lan_resources[] = {
|
||||
};
|
||||
|
||||
struct smsc911x_platform_config csb726_lan_config = {
|
||||
.irq_type = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
||||
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
||||
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
||||
.flags = SMSC911X_USE_32BIT,
|
||||
.phy_interface = PHY_INTERFACE_MODE_MII,
|
||||
|
@ -71,11 +71,6 @@ config SA1100_H3600
|
||||
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
|
||||
<http://www.compaq.com/products/handhelds/pocketpc/>
|
||||
|
||||
config SA1100_H3XXX
|
||||
bool
|
||||
depends on SA1100_H3100 || SA1100_H3600
|
||||
default y
|
||||
|
||||
config SA1100_BADGE4
|
||||
bool "HP Labs BadgePAD 4"
|
||||
select SA1111
|
||||
|
@ -25,6 +25,7 @@ led-$(CONFIG_SA1100_CERF) += leds-cerf.o
|
||||
|
||||
obj-$(CONFIG_SA1100_COLLIE) += collie.o
|
||||
|
||||
obj-$(CONFIG_SA1100_H3100) += h3600.o
|
||||
obj-$(CONFIG_SA1100_H3600) += h3600.o
|
||||
|
||||
obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o
|
||||
|
@ -77,7 +77,7 @@ static struct clock_event_device ckevt_sa1100_osmr0 = {
|
||||
.set_mode = sa1100_osmr0_set_mode,
|
||||
};
|
||||
|
||||
static cycle_t sa1100_read_oscr(void)
|
||||
static cycle_t sa1100_read_oscr(struct clocksource *s)
|
||||
{
|
||||
return OSCR;
|
||||
}
|
||||
|
@ -281,6 +281,16 @@ int gpio_unregister_callback(unsigned gpio)
|
||||
}
|
||||
EXPORT_SYMBOL(gpio_unregister_callback);
|
||||
|
||||
/* Non-zero means valid */
|
||||
int gpio_is_valid(int number)
|
||||
{
|
||||
if (number >= 0 &&
|
||||
number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
|
||||
return 1;
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(gpio_is_valid);
|
||||
|
||||
int gpio_request(unsigned gpio, const char *label)
|
||||
{
|
||||
if (gpio_pin[gpio].users)
|
||||
|
@ -258,6 +258,7 @@
|
||||
#define PIN_TO_PORT(val) (val >> 3)
|
||||
|
||||
/* These can be found in arch/arm/mach-u300/gpio.c */
|
||||
extern int gpio_is_valid(int number);
|
||||
extern int gpio_request(unsigned gpio, const char *label);
|
||||
extern void gpio_free(unsigned gpio);
|
||||
extern int gpio_direction_input(unsigned gpio);
|
||||
|
@ -17,7 +17,7 @@ config CPU_ARM610
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V3 if MMU
|
||||
select CPU_TLB_V3 if MMU
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
help
|
||||
The ARM610 is the successor to the ARM3 processor
|
||||
and was produced by VLSI Technology Inc.
|
||||
@ -31,7 +31,7 @@ config CPU_ARM7TDMI
|
||||
depends on !MMU
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_LV4T
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4
|
||||
help
|
||||
A 32-bit RISC microprocessor based on the ARM7 processor core
|
||||
@ -49,7 +49,7 @@ config CPU_ARM710
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V3 if MMU
|
||||
select CPU_TLB_V3 if MMU
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
help
|
||||
A 32-bit RISC microprocessor based on the ARM7 processor core
|
||||
designed by Advanced RISC Machines Ltd. The ARM710 is the
|
||||
@ -64,7 +64,7 @@ config CPU_ARM720T
|
||||
bool "Support ARM720T processor" if ARCH_INTEGRATOR
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_LV4T
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
@ -83,7 +83,7 @@ config CPU_ARM740T
|
||||
depends on !MMU
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_LV4T
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V3 # although the core is v4t
|
||||
select CPU_CP15_MPU
|
||||
help
|
||||
@ -100,7 +100,7 @@ config CPU_ARM9TDMI
|
||||
depends on !MMU
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_NOMMU
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4
|
||||
help
|
||||
A 32-bit RISC microprocessor based on the ARM9 processor core
|
||||
@ -114,7 +114,7 @@ config CPU_ARM920T
|
||||
bool "Support ARM920T processor" if ARCH_INTEGRATOR
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_EV4T
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WT
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
@ -135,7 +135,7 @@ config CPU_ARM922T
|
||||
bool "Support ARM922T processor" if ARCH_INTEGRATOR
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_EV4T
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WT
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
@ -154,7 +154,7 @@ config CPU_ARM925T
|
||||
bool "Support ARM925T processor" if ARCH_OMAP1
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_EV4T
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WT
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
@ -173,7 +173,7 @@ config CPU_ARM926T
|
||||
bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV5TJ
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V4WB if MMU
|
||||
@ -191,7 +191,7 @@ config CPU_FA526
|
||||
bool
|
||||
select CPU_32v4
|
||||
select CPU_ABRT_EV4
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_CACHE_FA
|
||||
@ -210,7 +210,7 @@ config CPU_ARM940T
|
||||
depends on !MMU
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_NOMMU
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MPU
|
||||
help
|
||||
@ -228,7 +228,7 @@ config CPU_ARM946E
|
||||
depends on !MMU
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_NOMMU
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MPU
|
||||
help
|
||||
@ -244,7 +244,7 @@ config CPU_ARM1020
|
||||
bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV4T
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WT
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
@ -262,7 +262,7 @@ config CPU_ARM1020E
|
||||
bool "Support ARM1020E processor" if ARCH_INTEGRATOR
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV4T
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WT
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
@ -275,7 +275,7 @@ config CPU_ARM1022
|
||||
bool "Support ARM1022E processor" if ARCH_INTEGRATOR
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV4T
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V4WB if MMU # can probably do better
|
||||
@ -293,7 +293,7 @@ config CPU_ARM1026
|
||||
bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V4WB if MMU # can probably do better
|
||||
@ -311,7 +311,7 @@ config CPU_SA110
|
||||
select CPU_32v3 if ARCH_RPC
|
||||
select CPU_32v4 if !ARCH_RPC
|
||||
select CPU_ABRT_EV4
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WB
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
@ -331,7 +331,7 @@ config CPU_SA1100
|
||||
bool
|
||||
select CPU_32v4
|
||||
select CPU_ABRT_EV4
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WB
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
@ -342,7 +342,7 @@ config CPU_XSCALE
|
||||
bool
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV5T
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
@ -352,7 +352,7 @@ config CPU_XSC3
|
||||
bool
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV5T
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
@ -363,7 +363,7 @@ config CPU_MOHAWK
|
||||
bool
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV5T
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
@ -374,7 +374,7 @@ config CPU_FEROCEON
|
||||
bool
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV5T
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_FEROCEON if MMU
|
||||
@ -394,7 +394,7 @@ config CPU_V6
|
||||
bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
|
||||
select CPU_32v6
|
||||
select CPU_ABRT_EV6
|
||||
select CPU_PABRT_NOIFAR
|
||||
select CPU_PABRT_V6
|
||||
select CPU_CACHE_V6
|
||||
select CPU_CACHE_VIPT
|
||||
select CPU_CP15_MMU
|
||||
@ -420,7 +420,7 @@ config CPU_V7
|
||||
select CPU_32v6K
|
||||
select CPU_32v7
|
||||
select CPU_ABRT_EV7
|
||||
select CPU_PABRT_IFAR
|
||||
select CPU_PABRT_V7
|
||||
select CPU_CACHE_V7
|
||||
select CPU_CACHE_VIPT
|
||||
select CPU_CP15_MMU
|
||||
@ -482,10 +482,13 @@ config CPU_ABRT_EV6
|
||||
config CPU_ABRT_EV7
|
||||
bool
|
||||
|
||||
config CPU_PABRT_IFAR
|
||||
config CPU_PABRT_LEGACY
|
||||
bool
|
||||
|
||||
config CPU_PABRT_NOIFAR
|
||||
config CPU_PABRT_V6
|
||||
bool
|
||||
|
||||
config CPU_PABRT_V7
|
||||
bool
|
||||
|
||||
# The cache model
|
||||
|
@ -27,6 +27,10 @@ obj-$(CONFIG_CPU_ABRT_EV5TJ) += abort-ev5tj.o
|
||||
obj-$(CONFIG_CPU_ABRT_EV6) += abort-ev6.o
|
||||
obj-$(CONFIG_CPU_ABRT_EV7) += abort-ev7.o
|
||||
|
||||
obj-$(CONFIG_CPU_PABRT_LEGACY) += pabort-legacy.o
|
||||
obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o
|
||||
obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o
|
||||
|
||||
obj-$(CONFIG_CPU_CACHE_V3) += cache-v3.o
|
||||
obj-$(CONFIG_CPU_CACHE_V4) += cache-v4.o
|
||||
obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o
|
||||
|
@ -12,6 +12,7 @@
|
||||
#include <linux/linkage.h>
|
||||
#include <linux/init.h>
|
||||
#include <asm/assembler.h>
|
||||
#include <asm/unwind.h>
|
||||
|
||||
#include "proc-macros.S"
|
||||
|
||||
@ -121,11 +122,13 @@ ENTRY(v6_coherent_kern_range)
|
||||
* - the Icache does not read data from the write buffer
|
||||
*/
|
||||
ENTRY(v6_coherent_user_range)
|
||||
|
||||
UNWIND(.fnstart )
|
||||
#ifdef HARVARD_CACHE
|
||||
bic r0, r0, #CACHE_LINE_SIZE - 1
|
||||
1: mcr p15, 0, r0, c7, c10, 1 @ clean D line
|
||||
1:
|
||||
USER( mcr p15, 0, r0, c7, c10, 1 ) @ clean D line
|
||||
add r0, r0, #CACHE_LINE_SIZE
|
||||
2:
|
||||
cmp r0, r1
|
||||
blo 1b
|
||||
#endif
|
||||
@ -142,6 +145,19 @@ ENTRY(v6_coherent_user_range)
|
||||
#endif
|
||||
mov pc, lr
|
||||
|
||||
/*
|
||||
* Fault handling for the cache operation above. If the virtual address in r0
|
||||
* isn't mapped, just try the next page.
|
||||
*/
|
||||
9001:
|
||||
mov r0, r0, lsr #12
|
||||
mov r0, r0, lsl #12
|
||||
add r0, r0, #4096
|
||||
b 2b
|
||||
UNWIND(.fnend )
|
||||
ENDPROC(v6_coherent_user_range)
|
||||
ENDPROC(v6_coherent_kern_range)
|
||||
|
||||
/*
|
||||
* v6_flush_kern_dcache_page(kaddr)
|
||||
*
|
||||
|
@ -13,6 +13,7 @@
|
||||
#include <linux/linkage.h>
|
||||
#include <linux/init.h>
|
||||
#include <asm/assembler.h>
|
||||
#include <asm/unwind.h>
|
||||
|
||||
#include "proc-macros.S"
|
||||
|
||||
@ -153,13 +154,16 @@ ENTRY(v7_coherent_kern_range)
|
||||
* - the Icache does not read data from the write buffer
|
||||
*/
|
||||
ENTRY(v7_coherent_user_range)
|
||||
UNWIND(.fnstart )
|
||||
dcache_line_size r2, r3
|
||||
sub r3, r2, #1
|
||||
bic r0, r0, r3
|
||||
1: mcr p15, 0, r0, c7, c11, 1 @ clean D line to the point of unification
|
||||
1:
|
||||
USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification
|
||||
dsb
|
||||
mcr p15, 0, r0, c7, c5, 1 @ invalidate I line
|
||||
USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line
|
||||
add r0, r0, r2
|
||||
2:
|
||||
cmp r0, r1
|
||||
blo 1b
|
||||
mov r0, #0
|
||||
@ -167,6 +171,17 @@ ENTRY(v7_coherent_user_range)
|
||||
dsb
|
||||
isb
|
||||
mov pc, lr
|
||||
|
||||
/*
|
||||
* Fault handling for the cache operation above. If the virtual address in r0
|
||||
* isn't mapped, just try the next page.
|
||||
*/
|
||||
9001:
|
||||
mov r0, r0, lsr #12
|
||||
mov r0, r0, lsl #12
|
||||
add r0, r0, #4096
|
||||
b 2b
|
||||
UNWIND(.fnend )
|
||||
ENDPROC(v7_coherent_kern_range)
|
||||
ENDPROC(v7_coherent_user_range)
|
||||
|
||||
|
@ -153,14 +153,11 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
|
||||
|
||||
page = pfn_to_page(pfn);
|
||||
mapping = page_mapping(page);
|
||||
if (mapping) {
|
||||
#ifndef CONFIG_SMP
|
||||
int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
|
||||
|
||||
if (dirty)
|
||||
__flush_dcache_page(mapping, page);
|
||||
if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
|
||||
__flush_dcache_page(mapping, page);
|
||||
#endif
|
||||
|
||||
if (mapping) {
|
||||
if (cache_is_vivt())
|
||||
make_coherent(mapping, vma, addr, pfn);
|
||||
else if (vma->vm_flags & VM_EXEC)
|
||||
|
@ -292,6 +292,11 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
|
||||
* down_read()
|
||||
*/
|
||||
might_sleep();
|
||||
#ifdef CONFIG_DEBUG_VM
|
||||
if (!user_mode(regs) &&
|
||||
!search_exception_tables(regs->ARM_pc))
|
||||
goto no_context;
|
||||
#endif
|
||||
}
|
||||
|
||||
fault = __do_page_fault(mm, addr, fsr, tsk);
|
||||
@ -519,9 +524,58 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
|
||||
arm_notify_die("", regs, &info, fsr, 0);
|
||||
}
|
||||
|
||||
|
||||
static struct fsr_info ifsr_info[] = {
|
||||
{ do_bad, SIGBUS, 0, "unknown 0" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 1" },
|
||||
{ do_bad, SIGBUS, 0, "debug event" },
|
||||
{ do_bad, SIGSEGV, SEGV_ACCERR, "section access flag fault" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 4" },
|
||||
{ do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" },
|
||||
{ do_bad, SIGSEGV, SEGV_ACCERR, "page access flag fault" },
|
||||
{ do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" },
|
||||
{ do_bad, SIGBUS, 0, "external abort on non-linefetch" },
|
||||
{ do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 10" },
|
||||
{ do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" },
|
||||
{ do_bad, SIGBUS, 0, "external abort on translation" },
|
||||
{ do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" },
|
||||
{ do_bad, SIGBUS, 0, "external abort on translation" },
|
||||
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 16" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 17" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 18" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 19" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 20" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 21" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 22" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 23" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 24" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 25" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 26" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 27" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 28" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 29" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 30" },
|
||||
{ do_bad, SIGBUS, 0, "unknown 31" },
|
||||
};
|
||||
|
||||
asmlinkage void __exception
|
||||
do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
|
||||
do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
|
||||
{
|
||||
do_translation_fault(addr, FSR_LNX_PF, regs);
|
||||
const struct fsr_info *inf = ifsr_info + fsr_fs(ifsr);
|
||||
struct siginfo info;
|
||||
|
||||
if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
|
||||
return;
|
||||
|
||||
printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
|
||||
inf->name, ifsr, addr);
|
||||
|
||||
info.si_signo = inf->sig;
|
||||
info.si_errno = 0;
|
||||
info.si_code = inf->code;
|
||||
info.si_addr = (void __user *)addr;
|
||||
arm_notify_die("", regs, &info, ifsr, 0);
|
||||
}
|
||||
|
||||
|
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user