mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 14:50:53 +07:00
Input: add matrix keypad driver for Cirrus EP93xx
This is a keyboard driver for the Cirrus Logic EP93xx keypad matrix peripheral. This driver is based on the pxa27x_keypad driver. [dtor@mail.ru: Plug in input_dev->keycode so keymap can be changed from userspace.] Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This commit is contained in:
parent
864fe73c31
commit
e06003af56
42
arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
Normal file
42
arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
Normal file
@ -0,0 +1,42 @@
|
||||
/*
|
||||
* arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
|
||||
#define __ASM_ARCH_EP93XX_KEYPAD_H
|
||||
|
||||
#define MAX_MATRIX_KEY_ROWS (8)
|
||||
#define MAX_MATRIX_KEY_COLS (8)
|
||||
|
||||
/* flags for the ep93xx_keypad driver */
|
||||
#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */
|
||||
#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */
|
||||
#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */
|
||||
#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */
|
||||
#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */
|
||||
#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */
|
||||
|
||||
/**
|
||||
* struct ep93xx_keypad_platform_data - platform specific device structure
|
||||
* @matrix_key_rows: number of rows in the keypad matrix
|
||||
* @matrix_key_cols: number of columns in the keypad matrix
|
||||
* @matrix_key_map: array of keycodes defining the keypad matrix
|
||||
* @matrix_key_map_size: ARRAY_SIZE(matrix_key_map)
|
||||
* @debounce: debounce start count; terminal count is 0xff
|
||||
* @prescale: row/column counter pre-scaler load value
|
||||
* @flags: see above
|
||||
*/
|
||||
struct ep93xx_keypad_platform_data {
|
||||
unsigned int matrix_key_rows;
|
||||
unsigned int matrix_key_cols;
|
||||
unsigned int *matrix_key_map;
|
||||
int matrix_key_map_size;
|
||||
unsigned int debounce;
|
||||
unsigned int prescale;
|
||||
unsigned int flags;
|
||||
};
|
||||
|
||||
/* macro for creating the matrix_key_map table */
|
||||
#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val))
|
||||
|
||||
#endif /* __ASM_ARCH_EP93XX_KEYPAD_H */
|
@ -332,4 +332,14 @@ config KEYBOARD_SH_KEYSC
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called sh_keysc.
|
||||
+
|
||||
config KEYBOARD_EP93XX
|
||||
tristate "EP93xx Matrix Keypad support"
|
||||
depends on ARCH_EP93XX
|
||||
help
|
||||
Say Y here to enable the matrix keypad on the Cirrus EP93XX.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called ep93xx_keypad.
|
||||
|
||||
endif
|
||||
|
@ -28,3 +28,4 @@ obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
|
||||
obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
|
||||
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
|
||||
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
|
||||
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
|
||||
|
470
drivers/input/keyboard/ep93xx_keypad.c
Normal file
470
drivers/input/keyboard/ep93xx_keypad.c
Normal file
@ -0,0 +1,470 @@
|
||||
/*
|
||||
* Driver for the Cirrus EP93xx matrix keypad controller.
|
||||
*
|
||||
* Copyright (c) 2008 H Hartley Sweeten <hsweeten@visionengravers.com>
|
||||
*
|
||||
* Based on the pxa27x matrix keypad controller by Rodolfo Giometti.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* NOTE:
|
||||
*
|
||||
* The 3-key reset is triggered by pressing the 3 keys in
|
||||
* Row 0, Columns 2, 4, and 7 at the same time. This action can
|
||||
* be disabled by setting the EP93XX_KEYPAD_DISABLE_3_KEY flag.
|
||||
*
|
||||
* Normal operation for the matrix does not autorepeat the key press.
|
||||
* This action can be enabled by setting the EP93XX_KEYPAD_AUTOREPEAT
|
||||
* flag.
|
||||
*/
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/clk.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/gpio.h>
|
||||
#include <mach/ep93xx_keypad.h>
|
||||
|
||||
/*
|
||||
* Keypad Interface Register offsets
|
||||
*/
|
||||
#define KEY_INIT 0x00 /* Key Scan Initialization register */
|
||||
#define KEY_DIAG 0x04 /* Key Scan Diagnostic register */
|
||||
#define KEY_REG 0x08 /* Key Value Capture register */
|
||||
|
||||
/* Key Scan Initialization Register bit defines */
|
||||
#define KEY_INIT_DBNC_MASK (0x00ff0000)
|
||||
#define KEY_INIT_DBNC_SHIFT (16)
|
||||
#define KEY_INIT_DIS3KY (1<<15)
|
||||
#define KEY_INIT_DIAG (1<<14)
|
||||
#define KEY_INIT_BACK (1<<13)
|
||||
#define KEY_INIT_T2 (1<<12)
|
||||
#define KEY_INIT_PRSCL_MASK (0x000003ff)
|
||||
#define KEY_INIT_PRSCL_SHIFT (0)
|
||||
|
||||
/* Key Scan Diagnostic Register bit defines */
|
||||
#define KEY_DIAG_MASK (0x0000003f)
|
||||
#define KEY_DIAG_SHIFT (0)
|
||||
|
||||
/* Key Value Capture Register bit defines */
|
||||
#define KEY_REG_K (1<<15)
|
||||
#define KEY_REG_INT (1<<14)
|
||||
#define KEY_REG_2KEYS (1<<13)
|
||||
#define KEY_REG_1KEY (1<<12)
|
||||
#define KEY_REG_KEY2_MASK (0x00000fc0)
|
||||
#define KEY_REG_KEY2_SHIFT (6)
|
||||
#define KEY_REG_KEY1_MASK (0x0000003f)
|
||||
#define KEY_REG_KEY1_SHIFT (0)
|
||||
|
||||
#define keypad_readl(off) __raw_readl(keypad->mmio_base + (off))
|
||||
#define keypad_writel(v, off) __raw_writel((v), keypad->mmio_base + (off))
|
||||
|
||||
#define MAX_MATRIX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS)
|
||||
|
||||
struct ep93xx_keypad {
|
||||
struct ep93xx_keypad_platform_data *pdata;
|
||||
|
||||
struct clk *clk;
|
||||
struct input_dev *input_dev;
|
||||
void __iomem *mmio_base;
|
||||
|
||||
int irq;
|
||||
int enabled;
|
||||
|
||||
int key1;
|
||||
int key2;
|
||||
|
||||
unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM];
|
||||
};
|
||||
|
||||
static void ep93xx_keypad_build_keycode(struct ep93xx_keypad *keypad)
|
||||
{
|
||||
struct ep93xx_keypad_platform_data *pdata = keypad->pdata;
|
||||
struct input_dev *input_dev = keypad->input_dev;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < pdata->matrix_key_map_size; i++) {
|
||||
unsigned int key = pdata->matrix_key_map[i];
|
||||
int row = (key >> 28) & 0xf;
|
||||
int col = (key >> 24) & 0xf;
|
||||
int code = key & 0xffffff;
|
||||
|
||||
keypad->matrix_keycodes[(row << 3) + col] = code;
|
||||
__set_bit(code, input_dev->keybit);
|
||||
}
|
||||
}
|
||||
|
||||
static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id)
|
||||
{
|
||||
struct ep93xx_keypad *keypad = dev_id;
|
||||
struct input_dev *input_dev = keypad->input_dev;
|
||||
unsigned int status = keypad_readl(KEY_REG);
|
||||
int keycode, key1, key2;
|
||||
|
||||
keycode = (status & KEY_REG_KEY1_MASK) >> KEY_REG_KEY1_SHIFT;
|
||||
key1 = keypad->matrix_keycodes[keycode];
|
||||
|
||||
keycode = (status & KEY_REG_KEY2_MASK) >> KEY_REG_KEY2_SHIFT;
|
||||
key2 = keypad->matrix_keycodes[keycode];
|
||||
|
||||
if (status & KEY_REG_2KEYS) {
|
||||
if (keypad->key1 && key1 != keypad->key1 && key2 != keypad->key1)
|
||||
input_report_key(input_dev, keypad->key1, 0);
|
||||
|
||||
if (keypad->key2 && key1 != keypad->key2 && key2 != keypad->key2)
|
||||
input_report_key(input_dev, keypad->key2, 0);
|
||||
|
||||
input_report_key(input_dev, key1, 1);
|
||||
input_report_key(input_dev, key2, 1);
|
||||
|
||||
keypad->key1 = key1;
|
||||
keypad->key2 = key2;
|
||||
|
||||
} else if (status & KEY_REG_1KEY) {
|
||||
if (keypad->key1 && key1 != keypad->key1)
|
||||
input_report_key(input_dev, keypad->key1, 0);
|
||||
|
||||
if (keypad->key2 && key1 != keypad->key2)
|
||||
input_report_key(input_dev, keypad->key2, 0);
|
||||
|
||||
input_report_key(input_dev, key1, 1);
|
||||
|
||||
keypad->key1 = key1;
|
||||
keypad->key2 = 0;
|
||||
|
||||
} else {
|
||||
input_report_key(input_dev, keypad->key1, 0);
|
||||
input_report_key(input_dev, keypad->key2, 0);
|
||||
|
||||
keypad->key1 = keypad->key2 = 0;
|
||||
}
|
||||
input_sync(input_dev);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void ep93xx_keypad_config(struct ep93xx_keypad *keypad)
|
||||
{
|
||||
struct ep93xx_keypad_platform_data *pdata = keypad->pdata;
|
||||
unsigned int val = 0;
|
||||
|
||||
clk_set_rate(keypad->clk, pdata->flags & EP93XX_KEYPAD_KDIV);
|
||||
|
||||
if (pdata->flags & EP93XX_KEYPAD_DISABLE_3_KEY)
|
||||
val |= KEY_INIT_DIS3KY;
|
||||
if (pdata->flags & EP93XX_KEYPAD_DIAG_MODE)
|
||||
val |= KEY_INIT_DIAG;
|
||||
if (pdata->flags & EP93XX_KEYPAD_BACK_DRIVE)
|
||||
val |= KEY_INIT_BACK;
|
||||
if (pdata->flags & EP93XX_KEYPAD_TEST_MODE)
|
||||
val |= KEY_INIT_T2;
|
||||
|
||||
val |= ((pdata->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK);
|
||||
|
||||
val |= ((pdata->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK);
|
||||
|
||||
keypad_writel(val, KEY_INIT);
|
||||
}
|
||||
|
||||
static int ep93xx_keypad_open(struct input_dev *pdev)
|
||||
{
|
||||
struct ep93xx_keypad *keypad = input_get_drvdata(pdev);
|
||||
|
||||
if (!keypad->enabled) {
|
||||
ep93xx_keypad_config(keypad);
|
||||
clk_enable(keypad->clk);
|
||||
keypad->enabled = 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void ep93xx_keypad_close(struct input_dev *pdev)
|
||||
{
|
||||
struct ep93xx_keypad *keypad = input_get_drvdata(pdev);
|
||||
|
||||
if (keypad->enabled) {
|
||||
clk_disable(keypad->clk);
|
||||
keypad->enabled = 0;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
/*
|
||||
* NOTE: I don't know if this is correct, or will work on the ep93xx.
|
||||
*
|
||||
* None of the existing ep93xx drivers have power management support.
|
||||
* But, this is basically what the pxa27x_keypad driver does.
|
||||
*/
|
||||
static int ep93xx_keypad_suspend(struct platform_device *pdev,
|
||||
pm_message_t state)
|
||||
{
|
||||
struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
|
||||
struct input_dev *input_dev = keypad->input_dev;
|
||||
|
||||
mutex_lock(&input_dev->mutex);
|
||||
|
||||
if (keypad->enabled) {
|
||||
clk_disable(keypad->clk);
|
||||
keypad->enabled = 0;
|
||||
}
|
||||
|
||||
mutex_unlock(&input_dev->mutex);
|
||||
|
||||
if (device_may_wakeup(&pdev->dev))
|
||||
enable_irq_wake(keypad->irq);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ep93xx_keypad_resume(struct platform_device *pdev)
|
||||
{
|
||||
struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
|
||||
struct input_dev *input_dev = keypad->input_dev;
|
||||
|
||||
if (device_may_wakeup(&pdev->dev))
|
||||
disable_irq_wake(keypad->irq);
|
||||
|
||||
mutex_lock(&input_dev->mutex);
|
||||
|
||||
if (input_dev->users) {
|
||||
if (!keypad->enabled) {
|
||||
ep93xx_keypad_config(keypad);
|
||||
clk_enable(keypad->clk);
|
||||
keypad->enabled = 1;
|
||||
}
|
||||
}
|
||||
|
||||
mutex_unlock(&input_dev->mutex);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#else /* !CONFIG_PM */
|
||||
#define ep93xx_keypad_suspend NULL
|
||||
#define ep93xx_keypad_resume NULL
|
||||
#endif /* !CONFIG_PM */
|
||||
|
||||
static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct ep93xx_keypad *keypad;
|
||||
struct ep93xx_keypad_platform_data *pdata = pdev->dev.platform_data;
|
||||
struct input_dev *input_dev;
|
||||
struct resource *res;
|
||||
int irq, err, i, gpio;
|
||||
|
||||
if (!pdata ||
|
||||
!pdata->matrix_key_rows ||
|
||||
pdata->matrix_key_rows > MAX_MATRIX_KEY_ROWS ||
|
||||
!pdata->matrix_key_cols ||
|
||||
pdata->matrix_key_cols > MAX_MATRIX_KEY_COLS) {
|
||||
dev_err(&pdev->dev, "invalid or missing platform data\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
keypad = kzalloc(sizeof(struct ep93xx_keypad), GFP_KERNEL);
|
||||
if (!keypad) {
|
||||
dev_err(&pdev->dev, "failed to allocate driver data\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
keypad->pdata = pdata;
|
||||
|
||||
irq = platform_get_irq(pdev, 0);
|
||||
if (irq < 0) {
|
||||
dev_err(&pdev->dev, "failed to get keypad irq\n");
|
||||
err = -ENXIO;
|
||||
goto failed_free;
|
||||
}
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!res) {
|
||||
dev_err(&pdev->dev, "failed to get I/O memory\n");
|
||||
err = -ENXIO;
|
||||
goto failed_free;
|
||||
}
|
||||
|
||||
res = request_mem_region(res->start, resource_size(res), pdev->name);
|
||||
if (!res) {
|
||||
dev_err(&pdev->dev, "failed to request I/O memory\n");
|
||||
err = -EBUSY;
|
||||
goto failed_free;
|
||||
}
|
||||
|
||||
keypad->mmio_base = ioremap(res->start, resource_size(res));
|
||||
if (keypad->mmio_base == NULL) {
|
||||
dev_err(&pdev->dev, "failed to remap I/O memory\n");
|
||||
err = -ENXIO;
|
||||
goto failed_free_mem;
|
||||
}
|
||||
|
||||
/* Request the needed GPIO's */
|
||||
gpio = EP93XX_GPIO_LINE_ROW0;
|
||||
for (i = 0; i < keypad->pdata->matrix_key_rows; i++, gpio++) {
|
||||
err = gpio_request(gpio, pdev->name);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "failed to request gpio-%d\n",
|
||||
gpio);
|
||||
goto failed_free_rows;
|
||||
}
|
||||
}
|
||||
|
||||
gpio = EP93XX_GPIO_LINE_COL0;
|
||||
for (i = 0; i < keypad->pdata->matrix_key_cols; i++, gpio++) {
|
||||
err = gpio_request(gpio, pdev->name);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "failed to request gpio-%d\n",
|
||||
gpio);
|
||||
goto failed_free_cols;
|
||||
}
|
||||
}
|
||||
|
||||
keypad->clk = clk_get(&pdev->dev, "key_clk");
|
||||
if (IS_ERR(keypad->clk)) {
|
||||
dev_err(&pdev->dev, "failed to get keypad clock\n");
|
||||
err = PTR_ERR(keypad->clk);
|
||||
goto failed_free_io;
|
||||
}
|
||||
|
||||
/* Create and register the input driver */
|
||||
input_dev = input_allocate_device();
|
||||
if (!input_dev) {
|
||||
dev_err(&pdev->dev, "failed to allocate input device\n");
|
||||
err = -ENOMEM;
|
||||
goto failed_put_clk;
|
||||
}
|
||||
|
||||
keypad->input_dev = input_dev;
|
||||
|
||||
input_dev->name = pdev->name;
|
||||
input_dev->id.bustype = BUS_HOST;
|
||||
input_dev->open = ep93xx_keypad_open;
|
||||
input_dev->close = ep93xx_keypad_close;
|
||||
input_dev->dev.parent = &pdev->dev;
|
||||
input_dev->keycode = keypad->matrix_keycodes;
|
||||
input_dev->keycodesize = sizeof(keypad->matrix_keycodes[0]);
|
||||
input_dev->keycodemax = ARRAY_SIZE(keypad->matrix_keycodes);
|
||||
|
||||
input_set_drvdata(input_dev, keypad);
|
||||
|
||||
input_dev->evbit[0] = BIT_MASK(EV_KEY);
|
||||
if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT)
|
||||
input_dev->evbit[0] |= BIT_MASK(EV_REP);
|
||||
|
||||
ep93xx_keypad_build_keycode(keypad);
|
||||
platform_set_drvdata(pdev, keypad);
|
||||
|
||||
err = request_irq(irq, ep93xx_keypad_irq_handler, IRQF_DISABLED,
|
||||
pdev->name, keypad);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "failed to request IRQ\n");
|
||||
goto failed_free_dev;
|
||||
}
|
||||
|
||||
keypad->irq = irq;
|
||||
|
||||
/* Register the input device */
|
||||
err = input_register_device(input_dev);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "failed to register input device\n");
|
||||
goto failed_free_irq;
|
||||
}
|
||||
|
||||
device_init_wakeup(&pdev->dev, 1);
|
||||
|
||||
return 0;
|
||||
|
||||
failed_free_irq:
|
||||
free_irq(irq, pdev);
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
failed_free_dev:
|
||||
input_free_device(input_dev);
|
||||
failed_put_clk:
|
||||
clk_put(keypad->clk);
|
||||
failed_free_io:
|
||||
i = keypad->pdata->matrix_key_cols - 1;
|
||||
gpio = EP93XX_GPIO_LINE_COL0 + i;
|
||||
failed_free_cols:
|
||||
for ( ; i >= 0; i--, gpio--)
|
||||
gpio_free(gpio);
|
||||
i = keypad->pdata->matrix_key_rows - 1;
|
||||
gpio = EP93XX_GPIO_LINE_ROW0 + i;
|
||||
failed_free_rows:
|
||||
for ( ; i >= 0; i--, gpio--)
|
||||
gpio_free(gpio);
|
||||
iounmap(keypad->mmio_base);
|
||||
failed_free_mem:
|
||||
release_mem_region(res->start, resource_size(res));
|
||||
failed_free:
|
||||
kfree(keypad);
|
||||
return err;
|
||||
}
|
||||
|
||||
static int __devexit ep93xx_keypad_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
|
||||
struct resource *res;
|
||||
int i, gpio;
|
||||
|
||||
free_irq(keypad->irq, pdev);
|
||||
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
|
||||
if (keypad->enabled)
|
||||
clk_disable(keypad->clk);
|
||||
clk_put(keypad->clk);
|
||||
|
||||
input_unregister_device(keypad->input_dev);
|
||||
|
||||
i = keypad->pdata->matrix_key_cols - 1;
|
||||
gpio = EP93XX_GPIO_LINE_COL0 + i;
|
||||
for ( ; i >= 0; i--, gpio--)
|
||||
gpio_free(gpio);
|
||||
|
||||
i = keypad->pdata->matrix_key_rows - 1;
|
||||
gpio = EP93XX_GPIO_LINE_ROW0 + i;
|
||||
for ( ; i >= 0; i--, gpio--)
|
||||
gpio_free(gpio);
|
||||
|
||||
iounmap(keypad->mmio_base);
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
release_mem_region(res->start, resource_size(res));
|
||||
|
||||
kfree(keypad);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver ep93xx_keypad_driver = {
|
||||
.driver = {
|
||||
.name = "ep93xx-keypad",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = ep93xx_keypad_probe,
|
||||
.remove = __devexit_p(ep93xx_keypad_remove),
|
||||
.suspend = ep93xx_keypad_suspend,
|
||||
.resume = ep93xx_keypad_resume,
|
||||
};
|
||||
|
||||
static int __init ep93xx_keypad_init(void)
|
||||
{
|
||||
return platform_driver_register(&ep93xx_keypad_driver);
|
||||
}
|
||||
|
||||
static void __exit ep93xx_keypad_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&ep93xx_keypad_driver);
|
||||
}
|
||||
|
||||
module_init(ep93xx_keypad_init);
|
||||
module_exit(ep93xx_keypad_exit);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
|
||||
MODULE_DESCRIPTION("EP93xx Matrix Keypad Controller");
|
||||
MODULE_ALIAS("platform:ep93xx-keypad");
|
Loading…
Reference in New Issue
Block a user