From df4b6a4c3bf5b0bc0fb5c35af9ca6da9c78922ee Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 15 Jun 2020 10:40:52 +0200 Subject: [PATCH] clk: bcm: rpi: Use CCF boundaries instead of rolling our own The raspberrypi firmware clock driver has a min_rate / max_rate clamping by storing the info it needs in a private structure. However, the CCF already provides such a facility, so we can switch to it to remove the boilerplate. Reviewed-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/d4c53dab6de5d5f70743d9c139d0117589530e62.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd --- drivers/clk/bcm/clk-raspberrypi.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c index a20492fade6a..e135ad28d38d 100644 --- a/drivers/clk/bcm/clk-raspberrypi.c +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -36,9 +36,6 @@ struct raspberrypi_clk { struct rpi_firmware *firmware; struct platform_device *cpufreq; - unsigned long min_rate; - unsigned long max_rate; - struct clk_hw pllb; }; @@ -142,13 +139,11 @@ static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate, static int raspberrypi_pll_determine_rate(struct clk_hw *hw, struct clk_rate_request *req) { - struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk, - pllb); u64 div, final_rate; u32 ndiv, fdiv; /* We can't use req->rate directly as it would overflow */ - final_rate = clamp(req->rate, rpi->min_rate, rpi->max_rate); + final_rate = clamp(req->rate, req->min_rate, req->max_rate); div = (u64)final_rate << A2W_PLL_FRAC_BITS; do_div(div, req->best_parent_rate); @@ -215,12 +210,15 @@ static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi) dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n", min_rate, max_rate); - rpi->min_rate = min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE; - rpi->max_rate = max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE; - rpi->pllb.init = &init; - return devm_clk_hw_register(rpi->dev, &rpi->pllb); + ret = devm_clk_hw_register(rpi->dev, &rpi->pllb); + if (!ret) + clk_hw_set_rate_range(&rpi->pllb, + min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE, + max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE); + + return ret; } static struct clk_fixed_factor raspberrypi_clk_pllb_arm = {