From dbe01b4412914c7ce8fb11ea45bf67fafbffd068 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 15 Jun 2020 10:41:03 +0200 Subject: [PATCH] Revert "clk: bcm2835: remove pllb" This reverts commit 2256d89333bd17b8b56b42734a7e1046d52f7fc3. Since we will be expanding the firmware clock driver, we'll need to remove the quirks to deal with the PLLB. However, we still want to expose the clock tree properly, so having that clock in the MMIO driver will allow that. Acked-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/5d26a4c58248f5be7760a7f2f720a1310baea5dd.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd --- drivers/clk/bcm/clk-bcm2835.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index 6bb7efa12037..32f5c13be9d1 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -1684,10 +1684,32 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .fixed_divider = 1, .flags = CLK_SET_RATE_PARENT), - /* - * PLLB is used for the ARM's clock. Controlled by firmware, see - * clk-raspberrypi.c. - */ + /* PLLB is used for the ARM's clock. */ + [BCM2835_PLLB] = REGISTER_PLL( + SOC_ALL, + .name = "pllb", + .cm_ctrl_reg = CM_PLLB, + .a2w_ctrl_reg = A2W_PLLB_CTRL, + .frac_reg = A2W_PLLB_FRAC, + .ana_reg_base = A2W_PLLB_ANA0, + .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE, + .lock_mask = CM_LOCK_FLOCKB, + + .ana = &bcm2835_ana_default, + + .min_rate = 600000000u, + .max_rate = 3000000000u, + .max_fb_rate = BCM2835_MAX_FB_RATE), + [BCM2835_PLLB_ARM] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "pllb_arm", + .source_pll = "pllb", + .cm_reg = CM_PLLB, + .a2w_reg = A2W_PLLB_ARM, + .load_mask = CM_PLLB_LOADARM, + .hold_mask = CM_PLLB_HOLDARM, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT), /* * PLLC is the core PLL, used to drive the core VPU clock.