mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 02:26:44 +07:00
i2c: Add FSI-attached I2C master algorithm
Add register definitions for FSI-attached I2C master and functions to access those registers over FSI. Add an FSI driver so that our I2C bus is probed up during an FSI scan. Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
parent
82d41d0974
commit
d6ffb63001
@ -1327,4 +1327,15 @@ config I2C_ZX2967
|
||||
This driver can also be built as a module. If so, the module will be
|
||||
called i2c-zx2967.
|
||||
|
||||
config I2C_FSI
|
||||
tristate "FSI I2C driver"
|
||||
depends on FSI
|
||||
help
|
||||
Driver for FSI bus attached I2C masters. These are I2C masters that
|
||||
are connected to the system over an FSI bus, instead of the more
|
||||
common PCI or MMIO interface.
|
||||
|
||||
This driver can also be built as a module. If so, the module will be
|
||||
called as i2c-fsi.
|
||||
|
||||
endmenu
|
||||
|
@ -137,5 +137,6 @@ obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
|
||||
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
|
||||
obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o
|
||||
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
|
||||
obj-$(CONFIG_I2C_FSI) += i2c-fsi.o
|
||||
|
||||
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
|
||||
|
239
drivers/i2c/busses/i2c-fsi.c
Normal file
239
drivers/i2c/busses/i2c-fsi.c
Normal file
@ -0,0 +1,239 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* FSI-attached I2C master algorithm
|
||||
*
|
||||
* Copyright 2018 IBM Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/bitfield.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/fsi.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
|
||||
#define FSI_ENGID_I2C 0x7
|
||||
|
||||
#define I2C_DEFAULT_CLK_DIV 6
|
||||
|
||||
/* i2c registers */
|
||||
#define I2C_FSI_FIFO 0x00
|
||||
#define I2C_FSI_CMD 0x04
|
||||
#define I2C_FSI_MODE 0x08
|
||||
#define I2C_FSI_WATER_MARK 0x0C
|
||||
#define I2C_FSI_INT_MASK 0x10
|
||||
#define I2C_FSI_INT_COND 0x14
|
||||
#define I2C_FSI_OR_INT_MASK 0x14
|
||||
#define I2C_FSI_INTS 0x18
|
||||
#define I2C_FSI_AND_INT_MASK 0x18
|
||||
#define I2C_FSI_STAT 0x1C
|
||||
#define I2C_FSI_RESET_I2C 0x1C
|
||||
#define I2C_FSI_ESTAT 0x20
|
||||
#define I2C_FSI_RESET_ERR 0x20
|
||||
#define I2C_FSI_RESID_LEN 0x24
|
||||
#define I2C_FSI_SET_SCL 0x24
|
||||
#define I2C_FSI_PORT_BUSY 0x28
|
||||
#define I2C_FSI_RESET_SCL 0x2C
|
||||
#define I2C_FSI_SET_SDA 0x30
|
||||
#define I2C_FSI_RESET_SDA 0x34
|
||||
|
||||
/* cmd register */
|
||||
#define I2C_CMD_WITH_START BIT(31)
|
||||
#define I2C_CMD_WITH_ADDR BIT(30)
|
||||
#define I2C_CMD_RD_CONT BIT(29)
|
||||
#define I2C_CMD_WITH_STOP BIT(28)
|
||||
#define I2C_CMD_FORCELAUNCH BIT(27)
|
||||
#define I2C_CMD_ADDR GENMASK(23, 17)
|
||||
#define I2C_CMD_READ BIT(16)
|
||||
#define I2C_CMD_LEN GENMASK(15, 0)
|
||||
|
||||
/* mode register */
|
||||
#define I2C_MODE_CLKDIV GENMASK(31, 16)
|
||||
#define I2C_MODE_PORT GENMASK(15, 10)
|
||||
#define I2C_MODE_ENHANCED BIT(3)
|
||||
#define I2C_MODE_DIAG BIT(2)
|
||||
#define I2C_MODE_PACE_ALLOW BIT(1)
|
||||
#define I2C_MODE_WRAP BIT(0)
|
||||
|
||||
/* watermark register */
|
||||
#define I2C_WATERMARK_HI GENMASK(15, 12)
|
||||
#define I2C_WATERMARK_LO GENMASK(7, 4)
|
||||
|
||||
#define I2C_FIFO_HI_LVL 4
|
||||
#define I2C_FIFO_LO_LVL 4
|
||||
|
||||
/* interrupt register */
|
||||
#define I2C_INT_INV_CMD BIT(15)
|
||||
#define I2C_INT_PARITY BIT(14)
|
||||
#define I2C_INT_BE_OVERRUN BIT(13)
|
||||
#define I2C_INT_BE_ACCESS BIT(12)
|
||||
#define I2C_INT_LOST_ARB BIT(11)
|
||||
#define I2C_INT_NACK BIT(10)
|
||||
#define I2C_INT_DAT_REQ BIT(9)
|
||||
#define I2C_INT_CMD_COMP BIT(8)
|
||||
#define I2C_INT_STOP_ERR BIT(7)
|
||||
#define I2C_INT_BUSY BIT(6)
|
||||
#define I2C_INT_IDLE BIT(5)
|
||||
|
||||
/* status register */
|
||||
#define I2C_STAT_INV_CMD BIT(31)
|
||||
#define I2C_STAT_PARITY BIT(30)
|
||||
#define I2C_STAT_BE_OVERRUN BIT(29)
|
||||
#define I2C_STAT_BE_ACCESS BIT(28)
|
||||
#define I2C_STAT_LOST_ARB BIT(27)
|
||||
#define I2C_STAT_NACK BIT(26)
|
||||
#define I2C_STAT_DAT_REQ BIT(25)
|
||||
#define I2C_STAT_CMD_COMP BIT(24)
|
||||
#define I2C_STAT_STOP_ERR BIT(23)
|
||||
#define I2C_STAT_MAX_PORT GENMASK(19, 16)
|
||||
#define I2C_STAT_ANY_INT BIT(15)
|
||||
#define I2C_STAT_SCL_IN BIT(11)
|
||||
#define I2C_STAT_SDA_IN BIT(10)
|
||||
#define I2C_STAT_PORT_BUSY BIT(9)
|
||||
#define I2C_STAT_SELF_BUSY BIT(8)
|
||||
#define I2C_STAT_FIFO_COUNT GENMASK(7, 0)
|
||||
|
||||
#define I2C_STAT_ERR (I2C_STAT_INV_CMD | \
|
||||
I2C_STAT_PARITY | \
|
||||
I2C_STAT_BE_OVERRUN | \
|
||||
I2C_STAT_BE_ACCESS | \
|
||||
I2C_STAT_LOST_ARB | \
|
||||
I2C_STAT_NACK | \
|
||||
I2C_STAT_STOP_ERR)
|
||||
#define I2C_STAT_ANY_RESP (I2C_STAT_ERR | \
|
||||
I2C_STAT_DAT_REQ | \
|
||||
I2C_STAT_CMD_COMP)
|
||||
|
||||
/* extended status register */
|
||||
#define I2C_ESTAT_FIFO_SZ GENMASK(31, 24)
|
||||
#define I2C_ESTAT_SCL_IN_SY BIT(15)
|
||||
#define I2C_ESTAT_SDA_IN_SY BIT(14)
|
||||
#define I2C_ESTAT_S_SCL BIT(13)
|
||||
#define I2C_ESTAT_S_SDA BIT(12)
|
||||
#define I2C_ESTAT_M_SCL BIT(11)
|
||||
#define I2C_ESTAT_M_SDA BIT(10)
|
||||
#define I2C_ESTAT_HI_WATER BIT(9)
|
||||
#define I2C_ESTAT_LO_WATER BIT(8)
|
||||
#define I2C_ESTAT_PORT_BUSY BIT(7)
|
||||
#define I2C_ESTAT_SELF_BUSY BIT(6)
|
||||
#define I2C_ESTAT_VERSION GENMASK(4, 0)
|
||||
|
||||
struct fsi_i2c_master {
|
||||
struct fsi_device *fsi;
|
||||
u8 fifo_size;
|
||||
};
|
||||
|
||||
static int fsi_i2c_read_reg(struct fsi_device *fsi, unsigned int reg,
|
||||
u32 *data)
|
||||
{
|
||||
int rc;
|
||||
__be32 data_be;
|
||||
|
||||
rc = fsi_device_read(fsi, reg, &data_be, sizeof(data_be));
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
*data = be32_to_cpu(data_be);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int fsi_i2c_write_reg(struct fsi_device *fsi, unsigned int reg,
|
||||
u32 *data)
|
||||
{
|
||||
__be32 data_be = cpu_to_be32p(data);
|
||||
|
||||
return fsi_device_write(fsi, reg, &data_be, sizeof(data_be));
|
||||
}
|
||||
|
||||
static int fsi_i2c_dev_init(struct fsi_i2c_master *i2c)
|
||||
{
|
||||
int rc;
|
||||
u32 mode = I2C_MODE_ENHANCED, extended_status, watermark;
|
||||
u32 interrupt = 0;
|
||||
|
||||
/* since we use polling, disable interrupts */
|
||||
rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_INT_MASK, &interrupt);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
mode |= FIELD_PREP(I2C_MODE_CLKDIV, I2C_DEFAULT_CLK_DIV);
|
||||
rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_MODE, &mode);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_ESTAT, &extended_status);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
i2c->fifo_size = FIELD_GET(I2C_ESTAT_FIFO_SZ, extended_status);
|
||||
watermark = FIELD_PREP(I2C_WATERMARK_HI,
|
||||
i2c->fifo_size - I2C_FIFO_HI_LVL);
|
||||
watermark |= FIELD_PREP(I2C_WATERMARK_LO, I2C_FIFO_LO_LVL);
|
||||
|
||||
return fsi_i2c_write_reg(i2c->fsi, I2C_FSI_WATER_MARK, &watermark);
|
||||
}
|
||||
|
||||
static int fsi_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
||||
int num)
|
||||
{
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
|
||||
static u32 fsi_i2c_functionality(struct i2c_adapter *adap)
|
||||
{
|
||||
return I2C_FUNC_I2C | I2C_FUNC_PROTOCOL_MANGLING |
|
||||
I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
|
||||
}
|
||||
|
||||
static const struct i2c_algorithm fsi_i2c_algorithm = {
|
||||
.master_xfer = fsi_i2c_xfer,
|
||||
.functionality = fsi_i2c_functionality,
|
||||
};
|
||||
|
||||
static int fsi_i2c_probe(struct device *dev)
|
||||
{
|
||||
struct fsi_i2c_master *i2c;
|
||||
int rc;
|
||||
|
||||
i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
|
||||
if (!i2c)
|
||||
return -ENOMEM;
|
||||
|
||||
i2c->fsi = to_fsi_dev(dev);
|
||||
|
||||
rc = fsi_i2c_dev_init(i2c);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
dev_set_drvdata(dev, i2c);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct fsi_device_id fsi_i2c_ids[] = {
|
||||
{ FSI_ENGID_I2C, FSI_VERSION_ANY },
|
||||
{ }
|
||||
};
|
||||
|
||||
static struct fsi_driver fsi_i2c_driver = {
|
||||
.id_table = fsi_i2c_ids,
|
||||
.drv = {
|
||||
.name = "i2c-fsi",
|
||||
.bus = &fsi_bus_type,
|
||||
.probe = fsi_i2c_probe,
|
||||
},
|
||||
};
|
||||
|
||||
module_fsi_driver(fsi_i2c_driver);
|
||||
|
||||
MODULE_AUTHOR("Eddie James <eajames@us.ibm.com>");
|
||||
MODULE_DESCRIPTION("FSI attached I2C master");
|
||||
MODULE_LICENSE("GPL");
|
Loading…
Reference in New Issue
Block a user